MEETS PART L1, L2 AND PART J
CFC/HCFC Free
HIGH THERMAL RESISTANCE
HIGH REFLECTIVE PERFORMANCE
High Performance Insulation for Underfloor Heating Systems
Superfloor Foil Bubble inSuspended Floor Applications
SuperFloor
CI/SfB (47) Rn7
CERTIFICATE NUMBER 060/99
PATENT PENDING
Manufactured in UK and made to a Quality System meeting therequirements of BS EN ISO 9002
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
QQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ
@@@@yy@@y@@@@@@
@@@@@@
yyyyyy
@@@@
@@@@
yyyy@@@@@@@y@@@@@@@@@@@@@@@@@@@@@@
@@@@
@@@@
@@@@
@@@@
@@@@
@@@@
@@@@
@@@@
@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@
@@@@@@@@
yyyyyyyy@@@@@@yyy
www.ybsinsulation.com
Superfloor Board in Solid Floor Applications
SUPERFLOOR INSULATION
BOARDS CAN BE MADE
WITH EXPANDED
POLYSTYRENE, EXTRUDED
POLYSTYRENE OR
POLYURETHANE
TO MEET ALL BUDGETS
AND DESIGN LOADS
SuperfloorUnderfloor Pipe Clip
Printed using Environmentally Friendly Paper - 100% chlorine free. Yorkshire Building Services (WHITWELL) Ltd.
Yorkshire Building Services (WHITWELL) Ltd.Units 5/6 & 7, Enterprise Court, Creswell, Derbyshire S80 4BX
Tel: 01909 721662 Fax: 01909 721442email: ybsinsulation.com www.ybsinsulation.com
For Sales and TechnicalSupport please contact:
For Details of other YBSProducts please contact:
JC
SL/
4282
/04/
2004
Technical SpecificationSuperfloor Foil Bubble Thermal Resistance 1.327 m2 K/W (inc air spaces)
Fire Properties Foil face meets Class 1
Environmental CFC & HCFC Free
Dimensions Thickness 4.5mm
Width 1200mm
Length 25m roll
Superfloor Board Grid Pattern: 100m2 main squares
Size: 2.4m x 1.2m
Insulation: Polyurethane
Expanded Polystyrene (All Grades)
Extruded Polystyrene (All Grades)
Please contact YBS Insulation for further technical information:
tel: 01909 721 662
INSTALLATION & TECHNICALINFORMATION
SuperFloor is designed to meetCurrent U-ValuesSuperfloor Foil Single for Upper Floors
Superfloor with foilfacing upwards
min 50mm air gapabove
YBS Pipe ClipSuspended
Floor Pipework
Foil turned up behind skirting
FloorJoist
Fixing Detail In Suspended FloorApplications Superfloor is rolled out with the foil facing upwards,
over the joists
The pipework is then clipped through into the insulationlayer using the specially designed YBS Pipe Clips to maintain required air gap - 5 per M2
The horizontal joints are overlapped by 50mm and are leftopen to allow for any moisture accumulation to dissipate
Superfloor must then be brought up (behind the skirtingboard) to 75mm
The pipework is then laid starting from the manifold andthen into the required room (see drawing). The pipe is thenlaid at uniform centres of approximately 200mm centres,notching where necessary.
The decking is then fixed with screws (at 200mm centres)into battens/joists providing 25mm penetration into the50mm wide battens/joists
Fixing Detail In Solid or Joisted GroundFloor ApplicationsThe screeded system comprises: The Superfloor edge strip - to be laid against allexternal and internal walls, providing edge insulationand an expansion zone for the screed.Superfloor insulation board is laid on top of theconcrete slab.(YBS provide a wide range of thicknesses and types ofinsulation to ensure the required insulating properties areachieved.)
Using the grid pattern - lay down the heating pipesas planned, using the specially designed YBS fixingclips to fix position.The screed is standard with no special additives.Most situations will require 65-85mm thickness ofscreed. Reinforcing mesh can be used where required.Expansion profiles are to be used where pipeworkpasses through an expansion joint.
Aluminium Foil Bubble Insulation
Suspended Floor Insulation
Minimum 50mm air gapAbove Floor Joists Superfloor
with foil facing upwards
All joints mustoverlap by
50mm NOT TO BE TAPEDSuperfloor Clip
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
QQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ
@@@@yy@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@
@@@@@@@@@
@@@@@@@@@
@@@@@@@@@
@@@@@@@@@
@@@@@@@@@
@@@@@@@@@
@@@@@@@@@
@@@@yy
Superfloor Board for Solid or Joisted Ground Floors Superfloor insulation is available with Expanded Polystyrene or Extruded Polyurethane
Floor Covering
65mm Screed/Concrete
SuperfloorInsulated Edge Strip
Pipe Clips
Heating Pipes
SuperfloorInsulation Board
DPM
Technical References Building Regulations 2000 Approved
Documents L1 & L2. Building Standards Part J Sept. 2001 BRE publication Thermal Insulation: Avoiding
the risks. BRE Paper IP12/94 Assessing the
Condensation Risk and Heat Loss at ThermalBridges Around Openings.
BS EN ISO 6946 : 1997 Building componentsand building elements - Thermal resistance andthermal transmittance - Calculation method.
British Standard References: BS 5250 Controlof Condensation in Buildings.
TestedSuperfloor: Emissivity measured by National Physical
Laboratory.
Thermal resistance measured by IndependentTest Laboratories.
Manufactured in UK and made to a Quality System meeting therequirements of BS EN ISO 9002