i
InGenius®
Connector Enterprise 6.0
December 2017 - Version 6.0.23397
ii
Windows and Microsoft are trademarks of Microsoft Corporation. Salesforce.com is a trademark of Salesforce.com. InGenius® is a trademark of InGenius Software Inc. Other product names mentioned in this document may be trademarks of their respective companies and are hereby acknowledged.
Copyright © 2017 InGenius Software Inc. Version 0.1
1
Introduction
These release notes provide information on the latest features and changes to existing
functionality for InGenius® Connector Enterprise.
Software Version
InGenius Release 6.0.23397
Salesforce APEX Release 1.42
Upgrades
To upgrade to the latest version, please contact support at [email protected]. We will
request logs from your active system to determine your install requirements, including any
workflow integrations you may have. Once your configuration has been verified, a member of
our deployment team will contact you to coordinate the upgrade.
Customer Portal Access
The InGenius Customer Portal is available from the Resources section on www.ingenius.com.
The Customer Portal provides customer access to Documentation, Report Packages, and
detailed Release Notes. Please contact [email protected] to request access.
Server Requirements – InGenius Connector Enterprise
The following configuration will support up to 1,000 users on a virtual or physical computer:
• Operating System: Windows Server 2012 R2 and Windows Server 2016.
• Processor:
o 3+ GHz - 4 cores (up to 1000 concurrent users) or
o 2.6 GHz - 4 cores (up to 800 concurrent users).
• Memory: 8GB.
• Disk: 20 GB available space.
• Network: 1GbE network interface card.
• .NET Framework 4.6
2
NOTES:
• Currently, Microsoft Dynamics 365 Version 9.0 is not supported with InGenius
Connector Enterprise 6.0. InGenius will provide Microsoft Dynamics 365 Version 9.0
support in early 2018.
• Existing customers upgrading to InGenius Connector Enterprise 6.0 may not require
processor upgrades if there are less than 500 concurrent users, however, the listed
processor specifications are strongly recommended for optimal system performance.
• Some Cisco UCM versions are not supported on Windows Server 2016 per Cisco DevNet.
• Microsoft Edge supports Salesforce Lightning only. If you choose to use Edge, you must
add the Salesforce and InGenius domains to Internet Explorer’s trusted sites.
Supported Platforms
Salesforce and Microsoft Dynamics 365
The following browser, phone system, and CRM platforms are supported with this release.
Phone System
• Cisco UCM 9.1, 10.5, 11, 11.5
• Cisco UCCE 10.5, 11, 11.5
• Cisco UCCE Finesse 10.5, 11, 11.5
• Cisco UCCX 9.5, 10.5, 10.6, 11, 11.5, 11.6
• Cisco UCCX Finesse 10.5, 11, 11.5, 11.6
• Avaya AES 6.3.3 SP7, 7.0.1
• Avaya IP Office Server Edition 9.1 SP10, 10.1
• Avaya IP Office 500 V2 9.1 SP10, 10.1
• Asterisk 13.8, 13.13, 14.0
• MiVoice Business 6.0 SP3, 7.2 SP1, 8.0 SP1
• Mitel MiContact Center 8.1, 8.1.2
• Broadsoft Broadworks R21 (for existing
customers)
CRM
• Salesforce Winter ΄18
o Classic – Sales Cloud & Service Cloud
o Lightning - Sales Cloud & Service Cloud
• Microsoft Dynamics CRM (Online and On-premise)
o 2013 SP1 Rollup 3, 2015 RTM, 2016 SP1
o Microsoft Dynamics 365
Server OS
• Windows Server 2012 R2, 2016
Microsoft .Net Framework
• 4.6
Client OS and Browser
• Windows 10
o Google Chrome 55+
o Mozilla Firefox 50+
o Microsoft Internet Explorer 11
o Microsoft Edge 38 (For Salesforce Lightning
support)
• Mac OS 10.11
o Google Chrome 55+
1
ServiceNow
The following browser, phone system, and ServiceNow platforms are supported with this
release.
Phone System
• Cisco UCM 9.1, 10.5, 11, 11.5
• Cisco UCCE 10.5, 11, 11.5
• Cisco UCCE Finesse 10.5, 11
• Cisco UCCX 9.5, 10.5, 10.6, 11.5, 11.6
• Cisco UCCX Finesse 10.5
• Avaya AES 7.0.1
• Genesys® PureEngage with integration via Genesys SIP Server 8.1
Supported Versions
• ServiceNow CSM
o Helsinki
o Istanbul
o Jakarta
• ServiceNow ITSM
o Istanbul
o Jakarta
Server OS
• Windows Server 2012 R2, 2016
Microsoft .Net Framework
• 4.6
Client OS and Browser
• Windows 10 o Google Chrome 55+
o Mozilla Firefox 50+
o Microsoft Internet Explorer 11
2
New and Updated Features
This document details important new features, enhancements, and changes to the latest
software version of InGenius Connector Enterprise 6.0. For specific release patch updates,
refer to the Resolved and Addressed Issues table at the end of these notes.
Features for Salesforce, Microsoft and ServiceNow Customers:
End user productivity enhancements that include:
1. Click to Create feature with New and Pre-fill options on a case or incident.
2. Efficient Call Result Logging which allows for disposition assignment while on a
call.
3. Extended Call Log Notes.
4. Read-only Call Log Notes.
Enterprise Administration enhancements include:
5. License optimization.
6. Per Group Administration.
Additional Features for ServiceNow:
7. Screen Transfer Support for ServiceNow.
8. InGenius integration with ServiceNow and Genesys PureEngage.
Additional Features for Mitel MiVoice Business:
9. Blind Transfer Support.
10. Screen Transfer Improvements.
3
End User Productivity Features
InGenius decreases call handle time with call logging features designed to improve agent
productivity and standardize call reports. With InGenius Connector Enterprise 6.0 InGenius
has extended the call log capability to make call logging even faster and reports easier to
read.
1 Click to Create allows a user to Pre-fill or Create new records dynamically
InGenius introduced a new Click to Create feature that improves productivity by reducing
case creation clicks by more than 60%. When a case is created, the record is pre-filled with
subject, comments, contact information from a popped record, and then saved and opened in
edit mode. InGenius automatically saves and relates the call activity to the case for accurate
reporting.
And since the case is saved, then opened in edit mode, the Agent can make additional notes if
required. When the Agent hangs up, the case information is saved, and the call results are
automatically saved and attached.
4
Agents who have a workflow requirement to create a case or incident for every call can
create the record with two clicks. InGenius automatically saves and relates the call activity to
the case for accurate reporting.
The InGenius click-to-create feature reduces call handle time, reduces data entry errors and
allows the Agent to focus on delivering exceptional customer service.
For more information, please watch the video https://www.ingenius.com/resource/click-create-ingenius/
2 Efficient Call Result Logging
InGenius has introduced a feature designed to minimize wrap up time and improve overall call
handle time. With InGenius Connector 6.0, Agents can disposition a call while the call is
active. This feature integrates seamlessly into a workflow that requires agents to move
quickly to the next call.
The administrator can select the
option to show dispositions from
with the Runtime Admin. This
feature will be off by default.
The user will observe that the
“Select Call Result” option is
available to them while the call
is in progress.
5
3 Extended Call Log Notes Field
End users now have the ability to enter and view exhaustive notes without the need to scroll.
The Agent is able to personalize the size of call log note field, and will observe that the call
log field size persists across tabs and sessions.
4 Read-only Call Log Notes
InGenius introduces new call log template capability that allows one-click entry for call log
notes, resulting in faster note creation and standardized report data. This means
Administrators can create read-only call log templates such as “Left Voicemail %DATE%”. The
agent would then be able to simply select the correct call log template button to drop the
following information into the note “Left Voicemail 13/12/2017”.
No additional information can be added to the note if the Admin has selected ‘Lock the call
log notes’ ensuring that the reports are standardized, and that sensitive customer information
does not get added to the customer database.
6
With this addition the Administrator now has three options for call logging templates. They
can allow Agents to create their own templates, they can drop specific information that is
then editable by the Agent, or they can drop specific information that cannot be edited by
the Agent.
Enterprise Administration
InGenius has created an update to the licensing management and granularity of permissions
on an organizations basis.
5 License Optimization
InGenius provides a time-saving capability for Admins, so that they do not need to manually
determine which users have been inactive. The new License Optimization feature ensures
that the customers are maximizing their investment by removing licenses from inactive users.
Administrators can choose to remove inactive users after a specific interval (2 - 52 weeks).
The program runs nightly and is managed from the Runtime Admin Users tab | Manage Users |
Advanced View.
7
6 Per Group Administration
Organizations can now restrict or grant admin rights to specific groups of users. This allows
different administrators to manage settings like speed dials, call log templates and call
dispositions for different teams within an organization. The Super Admin can optionally assign
admin access to the configuration tab, and the user and licensing tab for all users in the
system.
8
ServiceNow Features
7 Screen Transfer Support for ServiceNow ITSM and CSM
InGenius introduces Screen Transfer support to ServiceNow ITSM and CSM customers. Screen
Transfer gives a warm start to all calls for a better customer experience, and more efficient
hand off between reps. Information captured and logged by a rep is easily transferred to a
subsequent agent so that customers never have to repeat themselves.
To see how Screen Transfer works, please watch the Video https://www.ingenius.com/resource/screen-transfer/.
8 InGenius Connector Enterprise integration for ServiceNow & Genesys PureEngage
InGenius now connects Genesys PureEngage to ServiceNow®
Customer Service Management or IT Service Management
applications and helps support centers increase agent productivity, call capacity and overall
customer satisfaction.
The new InGenius integration for ServiceNow and Genesys PureEngage supports screen pop,
click-to-dial, automated call logging and other standard InGenius features within the
ServiceNow interface.
For more information please visit https://www.ingenius.com/resource/servicenow-ingenius-telephony-integration/.
Mitel MiVoice Business Features
9 Blind Transfer Support
Blind Transfer support for MiVoice Business allows an agent to quickly transfer calls to another
agent. Blind transfer may be used with screen transfer so all relevant data is captured and
passed on to the receiving agent.
9
10 Screen Transfer Improvements
In Mitel MiVoice Business environments, screen transfer now includes related records as
information included in the screen transfer. The transferred data allows the receiving agent
to quickly access case details and related records at a glance.
InGenius End of Support Announcements
With the release of InGenius Connector Enterprise 6.0, InGenius is discontinuing support for
all versions of the 3.x, 2.x and 1.x software series.
Third Party Platform End of Support Announcements
InGenius Connector Enterprise 6.0 is not certified on the following platforms.
Platforms No Longer Supported by InGenius Vendor End of Support Date
Microsoft Windows 8.1 January 9, 2018
Asterisk 11.x October 25, 2017
Microsoft Dynamics CRM 2011 July 12, 2016
Cisco UCCE 8.x April 30 2016
InGenius integration with Microsoft USD January 20, 2016
Internet Explorer 9 January 12, 2016
Internet Explorer 10 January 12, 2016
Asterisk 12.x December 20, 2015
Asterisk 1.8 October 21, 2015
Internet Explorer 8 August 31, 2015
Windows Server 2008 R2 January 13, 2015
Cisco Unified Call Manager 8.5 July 31, 2017
Cisco UCCX 8.5 August 31, 2017
When a vendor declares a platform end of life, InGenius will re-evaluate on-going support
for that platform, and support for that version may end. Refer to the following table that
includes the upcoming end of support date for some platforms.
10
Future Announced End of Support Date
Cisco UCCE 9.x March 31, 2018
Cisco UCCX 9.x July 31, 2018
Asterisk 14.x September 26, 2018
Windows Server 2012 R2 October 9, 2018
Cisco UCM 9.x December 31, 2018
InGenius is committed to providing the best possible support. As a CTI solution merging
multiple platforms, our testing and certification effort is incremental based on the supported
configurations. As platforms and features become sparsely used, InGenius will issue an End of
Support announcement.
Frequently Asked Questions (FAQs)
Q1: I am still using Microsoft Dynamics CRM 2011, or a different platform that may be unsupported by InGenius. How can I find out more about the support options available to me?
A1: Please contact your account manager or [email protected] to discuss options.
Q2: Do I have to do anything to receive these new features and enhancements?
A2: Yes. Simply contact [email protected] to schedule your upgrade. InGenius customer care will take you through the upgrade process.
Q3: Is there a fee associated with this upgrade?
A3: No, as part of the license fee with InGenius these features and enhancements are at no cost to our clients.
Q4: What is involved in upgrading?
A4: Upgrades are assisted by an InGenius customer care agent. Upgrades may be arranged outside of regular business hours as required. Contact Customer Care for more information.
Contact Us
For any queries about the latest release or to update, please contact your support team at
[email protected]. To add additional licenses, please contact our sales team at