1Março 2012
© 1994 – 2011 Fieldbus Foundation
Interoperable ROM DCS Integration
Libanio de Souza(Smar DCS Integration Leader)
2Março 2012
© 1994 – 2011 Fieldbus Foundation
Start Point
DCS system with H1 and Profibus Equipment integrated withSmar DFI302 controllers and Smar I/O cards.
3Março 2012
© 1994 – 2011 Fieldbus Foundation
Final Solution : Interoperable ROM DCS Integration
DCS system with H1 and Profibus Equipment integrated withSmar DFI302 controllers and Smar I/O cards
+ Wireless Hart; ISA - SP100 Devices; H1 devices; conventional devices; ROM devices from diferrent manufactures.
4Março 2012
© 1994 – 2011 Fieldbus Foundation
Tools for interoperability
Field Device AEnhanced
DD Tokenizer
DD Binary A
CFF Source A
Interoperable ROM DCS Integration
ROM Device
5Março 2012
© 1994 – 2011 Fieldbus Foundation
Association Block Concept
The Association Block is used to support the modular ROM devices.
Interoperable ROM DCS Integration
6Março 2012
© 1994 – 2011 Fieldbus Foundation
Association Block Concept
Standardization Without loosing flexibility to describedifferent hardwares
Smar DF302ROM deviceRack/ Slot
Interoperable ROM DCS Integration
7Março 2012
© 1994 – 2011 Fieldbus Foundation
Association Block Concept
Standardization Without loosing flexibility to describedifferent hardwares
STHAL ISROM deviceCard number
Interoperable ROM DCS Integration
8Março 2012
© 1994 – 2011 Fieldbus Foundation
The Association Block is used to configure the hardware components. Each application requires different
combination of hardware modules.
Interoperable ROM DCS Integration
9Março 2012
© 1994 – 2011 Fieldbus Foundation
The Association Block is also used to monitoring
the actual installed hardware components. Expected/Actual/Status
per hardware component.
Interoperable ROM DCS Integration
10Março 2012
© 1994 – 2011 Fieldbus Foundation
The component configured in the Association Block point to a transducer block that represent that type of hardware module.
Interoperable ROM DCS Integration
11Março 2012
© 1994 – 2011 Fieldbus Foundation
For each hardware type there is a transducer block
with a number of I/O points with a defined
direction for each I/O point.
Interoperable ROM DCS Integration
12Março 2012
© 1994 – 2011 Fieldbus Foundation
VAR_NAME : I/O name in the transducer.CHANNEL_TAG : association with I/O name ( VAR_NAME) in the Function Block.
Interoperable ROM DCS Integration
13Março 2012
© 1994 – 2011 Fieldbus Foundation
New Function Blocks with one I/O parameter with
multiples I/O values inside.One variable carries up to
64 binaries values.
Interoperable ROM DCS Integration
14Março 2012
© 1994 – 2011 Fieldbus Foundation
MAI_16 and MAO_16 for
multiples analog values
Interoperable ROM DCS Integration
15Março 2012
© 1994 – 2011 Fieldbus Foundation
Interoperable ROM DCS Integration
MBI_64 and MBO_64 for multiples binary values.
16Março 2012
© 1994 – 2011 Fieldbus Foundation
Interoperable ROM DCS Integration
Flexible FunctionBlock supporting new data type (multiples I/O
data type).
17Março 2012
© 1994 – 2011 Fieldbus Foundation
Interoperable ROM DCS Integration
The same link concept of H1, now is used for
the new data type carring 16 or 64 I/O
values.