-1-
©2015 H-D or its Affiliates. HARLEY, HARLEY-DAVIDSON and the Bar & Shield Design are among the trademarks of H-D U.S.A. LLC,Baron & Baron Inc. is a licensee of Harley-Davidson Motor Company.
Shown here is a Suggested Kit(HDKJ144DKIT)and welcome Dealer’s ownpreferred keychain selections.Please note, keychains in kitswill change every 6 months.
24 various styles seen here insideour D25 spinning counter-top display!
HDKD362
2-sided keychain with3M Carbon fiber vinyl inlays
HDKJ144DKIT (side 1)Sampling of 12 keychain styles
shown here
HDKJ144DKIT (side 2)Sampling of 12 keychain styles
shown here
KEYCHAINS HDKCF363-K
HDKCF369HDKY368
4-piece keychain Gift Set. This design piece isembellished with Swarovski® crystals
This design piece isembellished withSwarovski® crystals
HDKY364
-2-
Swarovski® is a registered trademark of Swarovski AG.
Made with ENVIRONMENTALLY FRIENDLY MATERIALS.Stainless Steel Plain Bar and Shield keychain. This design piece is embellished with Swarovski® crystals.Emblem Size: 1-3/8" W x 1-3/8" H
INTERCHANGEABLE MEDALLIONKEYCHAINS EMBELLISHED WITHSWAROVSKI® CRYSTALS
HDKFSY191RHDKY12130, 2.4mm crystals protected with mini domes. Interchangeable Medallion keychain with removable clasp. Made with ENVIRONMENTALLY FRIENDLY MATERIALS. Stainless Steel Crystal Skull keychain. This design piece is embellished with Swarovski® crystals and a key ring imprinted with a laser engraved H-D® wordmark. Size: 3-7/8” L x 3/4" W.
Made with a Movable Jaw.Above close-up seen without keyring.
18” BELT LOOP FASHION KEYCHAINS
This rich black velour pouchcomes with many of our
interchangeable medallionkeychains. A beautiful bonus.
HDKMM12For Him. An 18” long fashion keychain with dual clasps,key ring, and 3 interchangable medallions.(M12, M14 & MS191)
HDKFMY12For Her. An 18” long fashion keychain with dual clasps,key ring, and 3 interchangable medallions. This design piece is embellished withSwarovski® crystals.
VELOUR POUCH
-3-
Swarovski® is a registered trademark of Swarovski AG.
INTERCHANGEABLE MEDALLIONKEYCHAINS
BLING KEYCHAINS EMBELLISHEDWITH SWAROVSKI® CRYSTALS
Clear Crystals
Pink Crystals
HDKCYH62Heart shaped keychain. This design pieceis embellished with Swarovski® crystals
and a decorative laser imprint.Size: 1.4”W x 2”H
HDKCYH62BKNHeart shaped keychain. This design pieceis embellished with Swarovski® crystals
and a decorative laser imprint.Size: 1.4”W x 2”H
This rich black velour pouchcomes with many of our
interchangeable medallionkeychains. A beautiful bonus.
VELOUR POUCH
HDKMY12Dual medallions. A Black filled Bar & Shield & a plainBar & Shield. This design piece is embellished with Swarovski® crystals.Medallion Size: 1”W x 1”H ea.
HDKM188Dual split HD® Bar font wordmark.Medallion Size: 1.8”W x .047”H ea.
HDKY14Bar and Shield keychain. Thisdesign piece is embellishedwith Swarovski® crystals.Emblem Size:1-13/16” W x 1-1/2” H
-4-
HDKQCM357Carabiner, diamond plate,
broken H-D wordmark, B&S.Size: 1.85” x 3.2”
HDKD352Bar & Shield,
3D Fleur-de-lis.Size: 1.5” x 4.3”
HDKD353Industrial look,Bar & Shield.
Size: 1.6” x 4.15”
HDKD354Bar & Shield,
dark diamond plate.Size: 1.53” x 4.4”
HDKMLF192Size:
1.5”W x 5-1/8”H
HDKD3363D Bar & Shield
with Red &Orange flames.
Size:3.125” x 1.75”
HDKD216Custom shaped
keychain.Size: 1.5”W x 4”H
HDKD239Willie G imprint.
Size:2”W x 4.75”H
HDKD333Big Industrialdesign with rivets and theBar & Shield.Size: 5” x 2”
HDKD276Bar & Shield with
dual crossed wrenches.Size: 1.75”W x 4”H
HDKD334Six sided shield
with the 3DWillie G skull.
Size:4.25” x 1.625”
HDKD282Bar & Shield with
Rivets.Size: 1.75”W x 4”H
HDKD3353D Red heart.
Dual inter-lockinghearts with a newscript H-D® font.Size: 3.5” x 1.5”
HDKD284Bar & Shield withdiamond plate.
Size: 1.75”W x 4.375”H
HDKD285Willie G imprint with
diamond plate.Size: 1.75”W x 4”H
HDKD275Willie G skull with
dual crossed wrenches.Size: 1.75”W x 4”H
HDKD317Willie G, flame.
Size:1”W x 4.375”H
HDKPT14Size:
1.125”W x 4”H
HDKWI08Size: 1.3"W x 2.7"H
HDKWI15Size: 1.3"W x 2.7"H
HDKWIE14Size: 1.3"W x 2.7"H
HDKPT15Size:
1.2"W x 3.9"H
HDKQCM25Carabiner keychain.Size: 1.7”W x 6.0”L
Carabiner clip not for load bearing use.
HDKPFE15-KBlack Nickel finishSize: 1.1"W x 2.8"H
HDKMS15Size: 2.7"W x 3.25"H
HDKPFE14-KBlack Nickel finishSize: 1.1"W x 2.8"H
HDKPF15Size: 1.1"W x 2.8"H
-5-
KEYCHAINS
HDKD102Emblem size:
1.55"Wx2.25"H
HDKD103Emblem size:
1.55"W x 2.25"H
HDKD14Bar and Shield.
Emblem:1.75"Wx1.4"H
HDKD15Emblem Size:
1.75"W x 1.36"H
HDKD140Tribal design keychain.Bar and Shield imprint.
Keychain size:1.375”W x 3.25”H x .125”D
HDKD86Vintage Bar and Shield.
Emblem: 2”W x 1.125”H
HDKD35Live to Ride,
Ride to Live keychain.Medallion size:1.5” L x 1.25” H
SKULL KEYCHAIN
HDK191Moving Jaw Action!Metal Skull keychain withlaser engraved Bar and Shield logo.Size: 3-7/8” L x 3/4" W.
HDKBO14Dog Tag shaped
Bottle Cap Opener withBar and Shield imprint.
Size: 1-1/8”W x 4-5/8”H
HDKBO181Dog Tag shaped
Bottle Cap Openerwith Willie G. imprint.
Size: 1-1/8”W x 4-5/8”H
HDKD153Custom shaped
keychain.Size: 1.4” W x 4” H
HDKDK86Orange & White painted
Dark Metal Vintage Bar & Shield.Fob Size: 2.0” wide
Made with a Movable Jaw.Above close-up seen without keyring.
Actual size
-6-
MULTI-FUNCTION KEYCHAINS
HDVC216W
HDVC240 HDVC25
TPMS COMPLIANT VALVE STEM CAPS WITH H-D® IMPRINTS(5 caps in package)
Chrome Plated Plastic Valve Stem Covers for your Tires. TPMS Compliant, including inner "O" ring seal ensuring a clean valve orifice to maintain consistent tire pressure. UV-Resistant Film packaged in Hang-tab HD Box. TPMS sensor federally mandated installed all new vehicles sold after September 2007 electronically monitors air pressure. Package comes with 5 caps.
HDVC14
Simulated projectionfrom Flashlight
HDKTPF147-Tool keychain:Flashlight, pliers,bottle opener, knife, file,phillips screw driver,flat head screw driverOpened Size: 2.25"W x 5.5"H
HDKTK14Multi-toolsBottle opener, knife,phillips screw driver,flat head screw driver.Size:1.25"Wx2.25"H
Now availablewith a light!(Back view)
(Above, front view)
HDKPL15Projector Flashlight with aThree Color Bar and Shield.Size: 0.5"W x 3.25"H
-7-
HDKJ72DKITD25. w/72 Keychains(3x 24 keychain models)
HDKJ144DKITD25. w/144 Keychains(6x 24 keychain models)
D25Elegant POP Spinner with Universal Key locks1. Optimizes point of purchase presentation and location2. Convenient and practical keychain merchandising3. 2-sided, dual doors, easy access for greater visual impact at retail level4. 360° revolving, scratch-resistant poly-carbonite plastic Display spins on durable steel ball bearing lazy-susan base5. Dimensions: 7” W x 15.5“ H x 5.125” D. Case includes 24 hooks holds 144 keychains
24 various styles seen here inside ourD25 spinning counter-top display
KEYCHAIN KITS
HDKJ144DKIT (side 1)Sampling of 12 keychain
styles shown here
HDKJ144DKIT (side 2)Sampling of 12 keychain
styles shown here
Shown above is a Suggested Kit (HDKJ144DKIT)and welcome Dealer’s own preferred keychain selections.Please note, keychains in kits will change every 6 months.
Below are the keychainsused for this kit (HDKJ144DKIT)
HDKTPF14
HDKD239
HDKQCM25
HDKPT15
HDKD317
HDKD335
HDKD216
HDKD336
HDKBO14
HDKD102
HDK191
HDKD15
HDKD285
HDKD354
HDKD284
HDKD334
HDKWI15
HDKDK86
HDKD35
HDKD275
HDKY364
HDKCF363-K
HDKD362
HDKCF369
-8-
North America (USA, Canada, Mexico sold since 1983) • 312mm x 161mm
Your Country License Plate
Researching still not conclusive December 2014 • Australia License Plate (372mm x 133.5mm)
Researching still not conclusive December 2014Japan License Plate (330mm x 166mm)
Researched 2014 weak market • Taiwan License Plate (320mm x 150mm)
All qualified EU Frames fit Standard EU Plate dimension 520x110mm • Launched 2014 SDM
INTERNATIONAL LICENSE PLATE FRAMES
Baron is expanding into H-D International Country license frames customizing each different size plate tooling per below 2013-14 developments qualifying minimum economical yearly casts.Baron is pleased to develop your Country’s HD License Frame, if interested please email [email protected] Baron may already know plate size possibly plate specimen quickly compile virtualled country frame appreciate your help verify size precise hole mount position ideally send extra unused government ssued plate (Baron may not possess) ensure dimensioned accurately.
China License Plate (444.5mm x 146.6mm) • Launched 2013 SDM
-9-
All hitch covers are chrome plated solid brass or Zinc and firmly bolted onto a stainless steel receiver post.Additional accessories include rubber gaskets, theft-resistant stainless steel screws, washers, & nuts.
TRAILER HITCH COVERS
Willie G Millennium SkullChrome plated finish
HDHC06For 2” Receivers
Willie G Millennium SkullAntique Nickel finish
HDHC06AFor 2” Receivers
Black color filledengraving
HDHC12For 2” Receivers
Raised MonotoneBar and Shield
HDHC13For 2” Receivers
Black Nickel plated finishRaised Monotone Bar and Shield
HDHC13-KFor 2” Receivers
Black color filledBar and Shield
HDHC14For 2” Receivers
Orange, Black & Whitecolor filled Bar and Shield
HDHC25For 2” Receivers
Black colorfilled engraving
HDHC58For 2” Receivers
3D die castwith Black color fills
HDHC86For 2” Receivers
Above, Orange & White painted3D Dark Metal Vintage Bar & Shield.
HDHC86-KFor 2” Receivers
Red, White, Blue & Blackcolor filled engraving
HDHC153For 2” Receivers
Black color filledengraving
HDHC216For 2” Receivers
-10-
All hitch covers are chrome plated solid brass or Zinc and firmly bolted onto a stainless steel receiver post.Additional accessories include rubber gaskets, theft-resistant stainless steel screws, washers, & nuts.
TRAILER HITCH COVERS
Additional accessories include rubber gaskets, theft-resistant stainless steel screws, washers, & nuts.HITCH COVER COMPONENTS
HC: 2” post, 3 foam gaskets& Locking bolt set.NOT FOR 1.25” POST OPENINGS
Post & emblem Post & gasketsLocking set Post & emblem Post & gasketsLocking set
HCM: 1.25” post, 2 foam gaskets& Locking bolt set.NOT FOR 2”POST OPENINGS
Black color filledengraving
HDHC240For 2” Receivers
HDHC275For 2” Receivers
Above, Chome plated 3D Willie G skullover dual crossed wrenches.
Chome plated 3D Bar & Shieldover dual crossed wrenches.
HDHC276For 2” Receivers
3D Bar & Shieldon a diamond plate background
HDHC290For 2” Receivers
Exposed chrome imprinton Black coated emblem
HDHCKXC325For 2” Receivers
3D Bar and Shieldwith Red & Orange flames
HDHC336For 2” Receivers
Below, images of 2 common post receivers.2” square & mini 1.25” square.
Bar and Shield on a Black Emblem.This design piece is embellishedwith Swarovski® crystals (Black).
HDHCKEOPICY14-KFor 2” Receivers
Bar and Shield on a Chrome Emblem.This design piece is embellishedwith Swarovski® crystals (Clear).
HDHCEOPICY14For 2” Receivers
-11-
TOW BALL HITCH COVERS (HCB)
*European Union vehicles has limited imported Standard Flared Hitch Balls instead vehicles outfitted primarily Swan Neck Euro Balls
Singlehitch ball
Doublehitch balls
HITCH COVER COMPONENTSFOR *MOST COUNTRIES• Innovative Tow Ball Post• Theft resistant wrench• Theft resistant screws• Washers• U-Clamp (patent pending)
HDHCB14
New innovative design allows hitch cover fit atop your trailer tow balls!• Theft resistant screws • U-Clamp fit all hitch balls diam 47.6mm, 50.8mm, 58.7mm
HDHCBE14
All Emblems available also as Standard HitchBall format, ordered as HDHCB-PN
Triple hitch balls
47.6mmSmall
50.8mm Medium
58.5mm Large
U-Clamp secures all Balls between 47.6mm-58.5mm diameter
HDHCB06
HDHCB14
HDHCB25
HDHCB216
HDHCB290
Below 5 HCB hitch coversavailable primarily for all countries other thanthe European Union orNorth America
-12-
15462 Electronic Lane $ Huntington Beach, CA 92649-1334Toll Free: 800-232-2766 $ Fax: 714-895-5105OR CALL (Toll Free: 877-903-3555 $ Tel: 714-903-7550 $ Fax: 714-903-7530)Web Site: www.baronlfi.com $ E-mail: [email protected]
• Innovative Tow Ball Post• Theft resistant wrench• Theft resistant screws• Washers• U-Clamp E (patent pending)
HITCH COVER COMPONENTSFOR EUROPEAN APPLICATIONS
There are two main categories of ISO tow ball: the flange fitting and the swan-neck which has an extended neck fitting into the tow-bracket. The flange type of towbar, common in the U.K., is non-removable.
Swan-neck trailer hitch ball attached under typical European vehicle.
New innovative design allowshitch covers to fit onEuropean tow balls!• Theft resistant screws• U-Clamp E (European hitch balls)
HDHCBE14
Flange type (above)
Swan-neck(left)
EUROPEAN TOW BALL HITCH COVER (HCBE)
TOW BALL HITCH COVER (HCB) also availablefor 5 Baron emblems ordered as HDHCB-PN
Secures all three standard Ball sizes:47.6-58.7mm and any dim. in between
Euro Ball typically 50mm diam
Euro-Ball
Below 5 HCBE hitch coversorganized in ranked sales available primarily for EU
HDHCBE06
HDHCBE14
HDHCBE25
HDHCBE216
HDHCBE290