Technical Characteristics:
-Mdf 4mm thickness covered with A’ quality laminate.
-Full perimeter finger joint with interior boosting at the point of lock and the point of
bottom.
-Honeycomb 35mm thickness impregnated with resin.
-3 simple hinges. Optional 3 double hinges.
-Plywood frame oval or straight.
-Plywood ledges oval or straight.
-Interior oval lock and perimetric rubber.
-Dimensions of the door panels (63cm, 68cm-73cm-78cm-83cm-88cm-93cm).
-Maximum height 212cm or 218cm under special order.
Door Construction:
Wooden door frame, type FINGERJOINT. The door is covered on both sides with MDF
of 4mm thick.
Frame construction:
The frame is made of block board and the ledge is made of plywood. The adhesives
used are consisted of two components (polyurethane) very important for humidity.
Standard equipment:
-Three hinges screwable (single).
- Internal lock (inox or gold).
-Sealing rubber.