List of Ceramic Stone (Flat) Tip Sizes P10▷▷
List of Ceramic Stone (Round) / Wood Tips/Brass Tip Sizes P11▷▷
List of Ceramic Stone Tips Sizes P10▷▷
List of Ceramic Stone(Round) Wood Tips/Brass Tips Sizes P11▷▷
Grinding Stone Length(L2) Width(W)
Part No.PS-402APS-602APS-403APS-603APS-803APS-403BPS-404APS-604APS-804APS-404B
Grit(#)400600400600800400400600800400
Length(L1)/ ㎜30302525252525252525
Grinding Stone Length(L2)/ ㎜15151515151515151515
Width(W)/ ㎜2233334444
Thickness(t)/ ㎜0.8 0.8 0.8 0.8 0.8 0.6 0.8 0.8 0.8 0.6
S
SP1
P1
P12
P2-3 P4-5 P6-735 55/55R 75R
SS/PEN
Agent
●The design and specifications are subject to change without prior notice for product improvement. ●Please use our genuine products for the chucks and tips.
General Catalog for TipsOur product lineups include various types of standard tips that are capable of dealing with various types of lapping, including removal of pick feed direction lines, hardened layers of plastic, and pressed die-cast molds.
※Please specify “Part No.” when placing an order.※For some products, there may be only a few products left in stock. Please check the inventory status with our company before placing an order. LAP_Tip_Catarog_EN_20190915
Metal Bond-Diamond Tips 【Flat】New diamond abrasive grains come out as the tip surface becomes worn, which enables lapping under the same operating conditions for a longer period of time than the electroplated file.
ManufacturerAnd Seller
2-21-4 Hatagaya, Shibuya-ku, Tokyo,151-0072, Japan
E-mail [email protected] http://www.sanwashoko.co.jp
TEL : 81-3-3376-3464 FAX : 81-3-3374-0346
■Please feel free to ask. Sales division:+81-3-3376-3464
External Diameter(Φ1)/ ㎜Φ8Φ8
Part No.SNE24SNE31
Internal Diameter(Φ2)/ ㎜Φ2.4Φ3.1
Length(L1)/ ㎜2020
Insertion Length(L2)/ ㎜55
For Ceramic Stone (Round) / Wood Tips / Brass SNE 24/31/54
Chuck
External Diameter/ ㎜Φ8
Part No.STA11L
Width(W)/ ㎜1.1
Length(L1)/ ㎜24
Insertion Length(L2)/ ㎜5
For Ceramic Stone (Flat) STA 11L
Width(W)
M4 External DiameterLength(L1)
Insertion Length(L2)
M4
Internal Diameter(Φ2)
Internal Diameter(Φ2)
External Diameter(Φ1)Length(L1)
External Diameter(Φ1)/ ㎜555
5.5
Part No.PNE-15PNE-20PNE-25PNE-30
Internal Diameter(Φ2)/ ㎜1.62.12.43.1
Length(L1)/ ㎜13131313
Insertion Length(L2)/ ㎜10.510.51011
For Ceramic Stone (Round) / Wood Tips PEN 15/20/25/30
Chuck
External Diameter/ ㎜Φ5
Part No.TNE-1
Width(W)/ ㎜1.1
Length(L1)/ ㎜14
Insertion Length(L2)/ ㎜5
For Ceramic Stone (Flat) TNE-1
Width(W)
M3 External DiameterLength(L1)
Insertion Length(L2)
M3 Length(L1)
M3 External Diameter(Φ1)Length(L1)
Insertion Length(L2)
P8-9
20/50P12
SS/PEN
Ceramic Stone 【Flat/Round】Wood Tips/BrassP10-11
Insertion Length(L2)
List of Ceramic Stone (Flat) Tip Sizes P10▷▷
List of Ceramic Stone (Round) / Wood Tips /Brass P11▷▷
Metal Bond-Diamond Tips 【Flat】35
Part No.SL 201SL 401SL 601SL 202SL 402SL 602SL 204SSL 404SSL 604SSL 204MSL 404MSL 604M
SL 205MHSL 405MHSL 605MHSL 206MHSL 406MHSL 606MHSL 205LHSL 405LHSL 605LHSL 206LHSL 406LHSL 606LH
Grit(#)200400600200400600200400600200400600200400600200400600200400600200400600
Length(L1)/ ㎜151515151515151515202020151515151515151515151515
Grinding Stone Length(L2)/ ㎜151515151515151515202020151515151515151515151515
Width(W)/ ㎜111222444444555666555666
Thickness(t)/ ㎜1.0 1.0 1.0 1.0 1.0 1.0
0.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.0
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Chuck Used
SKBThickness(t)
Length(L1)M3
Grinding Stone Length(L2) Width(W)
P3P2
New diamond abrasive grains come out as the tip surface becomes worn, which enables lapping under the same operating conditions for a longer period of time than the electroplated file.
External Diameter(Φ1)/ ㎜Φ8Φ8Φ9
Part No.SNE24SNE31SNE54
Internal Diameter(Φ2)/ ㎜Φ2.4Φ3.1Φ5.4
Length(L1)/ ㎜202020
Insertion Length(L2)/ ㎜555
For Ceramic Stone (Round) / Wood Tips / Brass SNE 24/31/54
Chuck
External Diameter/ ㎜Φ8
Part No.STA11L
Width(W)/ ㎜1.1
Length(L1)/ ㎜24
Insertion Length(L2)/ ㎜5
For Ceramic Stone (Flat) STA 06L/11L/21L
External Diameter/ ㎜Φ8
Part No.SKB
Screw Diameter/ ㎜M3
Length(L1)/ ㎜11
For Metal Bond-Diamond Tips SKB
M4 Length(L1)
M3
Width(W)
M4 Length(L1)
M4
Internal Diameter(Φ2)
External Diameter(Φ1)
External Diameter
Length(L1)
Insertion Length(L2)
Insertion Length(L2)
External Diameter
List of Ceramic Ceramic Stone(Flat)Tip Sizes P10-11▷▷List of Wood Tips(Round)/Brass Tip Sizes P11▷▷
External Diameter(Φ1)/ ㎜7.47.589
10.5
Part No.NE21NE24NE31NE41NE54
Internal Diameter(Φ2)/ ㎜2.12.43.14.15.4
Length(L1)/ ㎜2323232323
Insertion Length(L2)/ ㎜1414141411
For Metal Bond-Diamond Tips (Flat) KBL
ChuckFor Ceramic Stone (Flat) GTA 11/16/21/24/33
External Diameter/ ㎜12×1212×1212×1212×1212×12
Part No.GTA11GTA16GTA21GTA24GTA33
Width/ ㎜1.11.62.12.43.3
Length(L1)/ ㎜2626262626
Insertion Length(L2)/ ㎜88888
Thickness(t)Length(L1)M8
GM
Width(W)
Thickness(t)Length(L1)M8
GS
Grinding Stone Length(L2)
Grinding Stone Length(L2) Width(W)
55/55R
Part No.GM 206GM 406GM 606
Grit(#)200400600
Length(L1)/ ㎜140140140
Grinding Stone Length(L2)/ ㎜202020
Width(W)/ ㎜666
Thickness(t)/ ㎜1.5 1.5 1.5
Part No.GS 206GS 406GS 606GS 208GS 408GS 608
Grit(#)200400600200400600
Length(L1)/ ㎜959595959595
Grinding Stone Length(L2)/ ㎜202020202020
Width(W)/ ㎜666888
Thickness(t)/ ㎜1.5 1.5 1.5 1.5 1.5 1.5
Part No.SL 201SL 401SL 601SL 202SL 402SL 602SL 204SSL 404SSL 604SSL 204MSL 404MSL 604MSL 204LSL 404LSL 604L
SL 205MHSL 405MHSL 605MHSL 206MHSL 406MHSL 606MH
Grit(#)200400600200400600200400600200400600200400600200400400200400600
Length(L1)/ ㎜252525252525252525353535454545353535353535
Grinding Stone Length(L2)/ ㎜151515151515151515202020252525151515151515
Width(W)/ ㎜111222444444444555666
Thickness(t)/ ㎜1.0 1.0 1.0 1.0 1.0 1.0
0.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.0
1.0 1.0 1.0 1.0 1.0 1.0
Chuck Used
KBLThickness(t)Length(L1)M3
Grinding Stone Length(L2) Width(W)
External Diameter/ ㎜Φ7
Part No.KBL
Width(W)/ ㎜1.1
Length(L1)/ ㎜26
Insertion Length(L2)/ ㎜11
Length(L1)ExternalDiameterM8
For Ceramic Stone (Round) / Wood Tips NE 21/24/31/41/54
P5P4
Metal Bond-Diamond Tips 【Flat】New diamond abrasive grains come out as the tip surface becomes worn, which enables lapping under the same operating conditions for a longer period of time than the electroplated file.
Internal Diameter(Φ2)
Length(L1)M8
Insertion Length(L2)Internal Diameter(Φ2)
External Diameter(Φ1)Length(L1)M8
Insertion Length(L2)Width(W)
ExternalDiameter(Φ1)
List of Ceramic Stone(Flat)Tip Sizes P10▷▷ List of Ceramic Stone(Round) / Wood Tips Sizes P11▷▷
Thickness(t)
Length(L1)M8
GM
Grinding Stone Length(L2) Width(W)
Thickness(t)
Length(L1)M8
GS
Grinding Stone Length(L2) Width(W)
75RMetal Bond-Diamond Tips 【Flat】
Part No.GM 206GM 406GM 606GM 208GM 408GM 608
Grit(#)200400600200400600
Length(L1)/ ㎜140140140150150150
Grinding Stone Length(L2)/ ㎜202020202020
Width(W)/ ㎜666888
Thickness(t)/ ㎜1.5 1.5 1.5 1.5 1.5 1.5
Part No.GS 206GS 406GS 606GS 208GS 408GS 608GS 210GS 410GS 610
Grit(#)200400600200400600200400600
Length(L1)/ ㎜959595959595105105105
Grinding Stone Length(L2)/ ㎜202020202020202020
Width(W)/ ㎜666888101010
Thickness(t)/ ㎜1.5 1.5 1.5 1.5 1.5 1.52.0 2.0 2.0
Chuck
External Diameter/ ㎜7.47.589
10.5
Part No.NE21NE24NE31NE41NE54
Internal Diameter(Φ2)/ ㎜2.12.43.14.15.4
Length(L1)/ ㎜2323232323
Insertion Length(L2)/ ㎜1414141411
For Ceramic Stone (Round) / Wood Tips NE 21/24/31/41/54
P7P6
New diamond abrasive grains come out as the tip surface becomes worn, which enables lapping under the same operating conditions for a longer period of time than the electroplated file.
Internal Diameter(Φ2)
External Diameter(Φ1)Length(L1)M8
Part No.GTA10
For Ceramic Stone (Flat) GTA 10
M8 External Diameter
Width(W)
Length(L1)
Insertion Length(L2) Insertion Length(L2)
External Diameter/ ㎜Φ10
Width(W)/ ㎜1.1
Length(L1)/ ㎜26
Insertion Length(L2)/ ㎜11
List of Ceramic Stone(Flat)Tip Sizes P10▷▷
List of Ceramic Stone(Round)Tips Sizes P11▷▷
List of Wood TipsSizes P11▷▷
Metal Bond-Diamond Tips 【Flat】25/50
Thickness(t)
M8
M/L
SL
Width(W)
External Diameter
Part No.SL 202SL 402SL 602SL 204SSL 404SSL 604SSL 204MSL 404MSL 604MSL 204LSL 404LSL 604L
Grit(#)200400600200400600200400600200400600
Length(L1)/ ㎜252525252525353535454545
Grinding Stone Length(L2)/ ㎜151515151515202020252525
Width(W)/ ㎜222444444444
Thickness(t)/ ㎜1.0 1.0 1.0
0.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.00.5 /0.7 /0.85 /1.0
1.0 1.0 1.0
Chuck Used
KBS
Part No.M206M406M606L206L406L606
Grit(#)200400600200400600
Length(L1)/ ㎜454545555555
Grinding Stone Length(L2)/ ㎜202020202020
Width(W)/ ㎜666666
Thickness(t)/ ㎜1.5 1.5 1.5 1.5 1.5 1.5
Thickness(t)
Length(L1)M3
Grinding Stone Length(L2) Width(W)
Length(L1)
Grinding Stone Length(L2)
P9P8
New diamond abrasive grains come out as the tip surface becomes worn, which enables lapping under the same operating conditions for a longer period of time than the electroplated file.
Chuck
External Diameter/ ㎜12
Part No.CO1
Width(W)/ ㎜1.1
Length(L1)/ ㎜18
Insertion Length(L2)/ ㎜10
For Ceramic Stone (Flat) CO 1
External Diameter/ ㎜Φ15
Part No.KBS
Screw Diameter/ ㎜M3
Length(L1)/ ㎜11
For Metal Bond-Diamond Tips KBS
M8
M8
Length(L1)
Length(L1)
M3
External Diameter
Width(W)
External Diameter/ ㎜1212
Part No.CO 2CO 3
Internal Diameter/ ㎜23
Length(L1)/ ㎜1818
Insertion Length(L2)/ ㎜65
For Ceramic Stone (Round) CO 2/3
Insertion Length(L2)
※ Ceramic Stone Φ 2.35 "can not be used for CO 2
※
Length(L1)M8
Insertion Length(L2)Internal Diameter
External Diameter/ ㎜7 9.5
Part No.NE30NE50
Internal Diameter/ ㎜3.15.4
Length(L1)/ ㎜2320
Insertion Length(L2)/ ㎜1414
For Wood Tips NE 30/50
External Diameter Internal DiameterInsertion Length(L2)
External Diameter
M8 Length(L1)
Part No.SB101SB102SB104SB106SB110SW101SW102SW104SW106SW110
Grit(#)80080080080080010001000100010001000
ColorBlueBlueBlueBlueBlue
WhiteWhiteWhiteWhiteWhite
Length(L)/ ㎜100100100100100100100100100100
Width(W)/ ㎜124610124610
Thickness(t)/ ㎜1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Ceramic Stone 【Flat】
Length(L)
Width(W)
Suitable for use with a wide area because the profile can be easily changed according to the area to be lapped. (Copper materials having the hardness of HRC63 or below are recommended.)
Ceramic Stone 【Round】Effective in lapping of curved surfaces, hole shapes, etc.
(Copper materials having the hardness of HRC63 or below are recommended.)
Wood Tips/Brass The wood tips are best suited for finish lapping. They are used together with diamond paste.
The brass tips are used for polishing without damaging the mold.
Thickness(t)
SR101SR102SR104SR106SR110SG101SG102SG104SG106SG110
1200120012001200120030003000300030003000
RedRedRedRedRedGrayGrayGrayGrayGray
100100100100100100100100100100
124610124610
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Usable Chucks
Chuck For LAPTRON S/35 Flat Chuck For LAPTRON 55/55R Flat Chuck For LAPTRON 75R Flat
Chuck For LAPTRON SS/PEN FlatChuck For LAPTRON 20/50 Flat
STA 11L
CO 1
GTA 10GTA 11
TNE-1
Grit(#)800800100010001200120030003000
Part No.SBD2SBD3SWD2SWD3SRD2SRD3SGD2SGD3
ColorBlueBlue
WhiteWhiteRedRedGrayGray
Length(L)/ ㎜100100100100100100100100
Diameter(Φ)/ ㎜Φ2.35Φ3.00Φ2.35Φ3.00Φ2.35Φ3.00Φ2.35Φ3.00
MaterialEbonyEbonyEbony
BambooWillowBrassBrass
Part No.HW 2HW 3HW 5SW 3SW 5BRS 2BRS 3
Length(L)/ ㎜1501501501502006550
Diameter(Φ)/ ㎜Φ2Φ3Φ5Φ3Φ5Φ2Φ3
Order Quantity/stick101010102001010
Length(L)Diameter(Φ)
Length(L)Diameter(Φ)
Mounting the tip
Attach the required tip to the tip of the hand tool. When attaching a tip, be sure to use the tip-fastening jig included with the product and securely fasten with the tip-fastening spanner.
Hand ToolTIP Chuck
Depending on the type of tip in use, output power may not reach the set value. Please Adjust the intensity of supersonic vibrations by turning the output adjustment knob.
※
Hexagonal Wrench
P11P10
Usable Chucks
Chuck For LAPTRON 55/55R/75R Round
Chuck For LAPTRON S/35 Round Chuck For LAPTRON SS/PEN Round
Chuck For LAPTRON 20/50 Round / Flat
Usable Chucks
SNE 24/31
Chuck For LAPTRON 55/55R/75R Round
Chuck For LAPTRON S/35 Round Chuck For LAPTRON SS/PEN RoundSNE 24/31/54
NE 24/31 CO 3
Chuck For LAPTRON 20/50 RoundNE 30/50
PEN 25/30
NE 21/31/54
PEN 25/30