+ All Categories
Transcript
Page 1: Laser Lab Instruments PM300 Series Dual Channel …Laser Lab Instruments 957 ITEM# $ £ € RMB DESCRIPTION PM300 $ 1,800.00 £ 1,134.00 € 1.674,00 ¥ 17,190.00 Dual Channel Power

Laser Lab InstrumentsLaser Lab Instruments

956 www.thorlabs.com

Detectors

Power Meters

CCD Cameras

Optical Chopper

Beam Profliers & Extensions Sets

Spectrometers

Temperature Controller & Shutter

Filter Wheels

Thorlabs’ new Dual Channel PM300 Series Optical Power Meterand PM300E Series Power and Energy Meter offer many feauresnot found in handheld devices. They are ideal for precise opticalmeasurements, laser and photodiode characterization, lifecyclemeasurements and many more applications in the lab and on themanufacturing floor. The dual channel design enables differentialand ratiometric measurements. Intuitive manual operation with thelarge graphics display, compatibility to conventional photodiodes,and excellent remote capabilities enable easy system integration.

The PM300 is compatible with all Thorlabs S100 SeriesPhotodiode Sensors (two channels) and S200 Series ThermalSensors (one channel) and allows the connection of unamplifiedanode or cathode grounded photodiodes with up to 10mAphotocurrent and thermal elements with up to 100mV outputvoltage. The PM300E additionally offers energy measurements with all Thorlabs ES100 and ES200 Series Energy Sensors (bothchannels) and dual-channel measurements with the S200 SeriesThermal Sensors as well. Both the PM300 and PM300E Series aresold as a single benchtop device with the sensors ordered separately.It can be combined with any of our power meter sensor heads, oruser-supplied photodiodes that provide a maximum 10mA output.The PM300E Series is additionally compatible with all ES100 andES200 Series Pyroelectric Energy Sensors.

Functionality

The calibrated sensors connect via two sub-D connectors on therear panel, which also provides two analog high bandwidth outputsto allow monitoring of each channel, plus the programmable analogoutput. Optional user-supplied photodiodes connect via two BNCinputs on the front panel, which feature switchable bandwidth anda programmable bias voltage. The input can be switched betweenthe front and rear connectors. The additional BNC output is gain-and-function programmable. It provides an analog voltageproportional to the output of one of the channels or as a differenceor ratio of the two power meter channels. The measurementresolution is 16 bit for all power ranges. The PM300 and PM300ESeries are controlled locally via the front panel, which features alarge 240x128 pixel LCD display, or remotely via USB 2.0.

Common Console Features■ Programmable Channels: Monitor, Difference, Ratio,

Math Functions, Linear and Log Values, Attenuation■ USB 2.0 Interface■ Large Graphics Display: 240 x 128 pixels ■ Compatible Sensors: S100 (Photodiode), S200

(Thermal) Power Meter Sensors, and CommonPhotodiodes

■ Programmable Responsivity for Connection ofPhotodiodes & Thermal Sensors

PM300E Additional Features■ Continuous and Single-Shot Energy Measurement of

Pulsed Laser Sources■ Adjustable Trigger Threshold, Beam Diameter, and

Wavelength■ Display of Energy in J and J/cm2, Average Power in W

and W/cm2, Repetition Rate in Hz■ Externally Triggered Power and Energy Measurements

PM300 Benchtop ConsoleSensors Sold Separately

PM300 Series Dual Channel Power and Energy Meters

PhotodiodeSensorSee page 958

IntegratingSpheres Sensor See page 959

Slim Sensor See page 958

Thermal Sensors See page 960

Pyroelectric Sensors See page 961

Post and PostHolders SoldSeparately

PM300E Benchtop ConsoleSample Display Screen

2_PowerMeters 946-961.qxd.P 7/13/07 8:53 AM Page 956

Page 2: Laser Lab Instruments PM300 Series Dual Channel …Laser Lab Instruments 957 ITEM# $ £ € RMB DESCRIPTION PM300 $ 1,800.00 £ 1,134.00 € 1.674,00 ¥ 17,190.00 Dual Channel Power

Laser Lab Instruments

957www.thorlabs.com

ITEM# $ £ € RMB DESCRIPTION

PM300 $ 1,800.00 £ 1,134.00 € 1.674,00 ¥ 17,190.00 Dual Channel Power Meter Console

PM300E $ 2,200.00 £ 1,386.00 € 2.046,00 ¥ 21,010.00 Dual Channel Power and Energy Meter Console

CAL-PM300 $ 200.00 £ 126.00 € 186,00 ¥ 1,910.00 Calibration Service for the PM300 Series Consoles

PM300 Benchtop Power Meter Without Sensor

Compatible With All Thorlabs’ Sensors. Please Refer to the Following 4 Pages.

SpecificationsPower Meter Model PM300 PM300EDetector Compatibility Photodiode Sensors S100 Series Photodiode Sensors S100 Series

Thermal Sensors S200 Series Thermal Sensors S200 SeriesPhotodiodes (Max 10mA) Pyroelectric Sensors ES100/ES200 Series

Thermopiles (Max 100mV) Photodiodes (Max 10mA)Thermopiles (Max 100mV)

Display Graphical LCD 240 x 128 pixels (3.7" x 2.4")

Display Format Numerical, Bar Graph, Trend Graph

Dimensions (H x W x D) Overall 220 x 122 x 325 mm

Photodiode Input CH1 & CH2 CH1 & CH2Units W, dBm, A W, dBm, A, W/cm2

Measurement Ranges 7 Decades; 10nA to 10mA 6 Decades; 100nA to 10mARanges Selectable in W, Sensor Dependent Ranges Selectable in W, Sensor Dependent

Display Resolution 1pA per Responsivity Value (A/W) 10pA per Responsivity Value (A/W)

Accuracy ±0.2% Full Scale (1µA - 10mA) ±0.2% Full Scale (1µA - 10mA)±0.5% Full Scale (10nA - 100nA) ±0.5% Full Scale (100nA)

Polarity AG, CG

Bias Voltage 0 to -10V (CG), 0 to +10V (AG)

Thermopile Power Input 1CH1 ONLY CH1 & CH2Units W, dBm, (V) W, dBm, W/cm2, V

Measurement Ranges 4 Decades; 100µV to 100mV 3 Decades; 1mV to 100mVRanges Selectable in W, Sensor Dependent Ranges Selectable in W, Sensor Dependent

Display Resolution 100nV per Responsivity Value (V/W) 1µV per Responsivity Value (V/W)

Accuracy ±0.5% Full Scale (1mV to 100mV range) ±0.5% Full Scale

Pyroelectric Energy Input N/A CH1 & CH2Units N/A J, J/cm2, W

Measurement Ranges N/A 4 Decades; 100mV to 100VRanges Selectable in J, Sensor Dependent

Display Resolution N/A 100µV per Responsivity Value (V/J)

Accuracy N/A ± 0.5% Full Scale

Maximum Repetition Rate N/A 5 kHz

External TriggerConnector N/A BNC Rear

Programmable Analog OutputSignal Selectable: CH1, CH2, CH1-CH2, CH1/CH2

Voltage Range 0 to ±10V; Programmable Gain and Offset

Bandwidth Up to 500Hz, Dependent on Sensor and Settings

Analog Outputs

Signal CH1, CH2 Amplified Input Signal

Voltage Range 0 to ±10V

Bandwidth Up to 100kHz, Dependent on Sensor and Settings

PM300 Series Dual Channel Power and Energy Meters

1 Channel 2 can be used for a second photodiode based power meter sensor. Please refer to the following 4 pages.

Detectors

Power Meters

CCD Cameras

Optical Chopper

Beam Profliers & Extensions Sets

Spectrometers

Temperature Controller & Shutter

Filter Wheels

2_PowerMeters 946-961.qxd.P 7/20/07 11:14 AM Page 957


Top Related