8/19/2019 Launch 3 2016 Consumables Catalog
1/77
Wireless Telecom, Grounding,Safety and Electrical Supplies
2016
W O R L D W I D E D I S T R I B U T I O N S O L U T I O N S
8/19/2019 Launch 3 2016 Consumables Catalog
2/77
8/19/2019 Launch 3 2016 Consumables Catalog
3/77
Product Index
Cable AttachmentsStackable Snap-In Hangers
Snap-In Hangers
Buttery Hangers
Angle Adapters
Anchor Rail Adapters
Stand Off Adapters3-Way Stand Off Adapters
Insert Kits
Attachment Hardware
Threaded Rod
Mini Hardware Kit
Hose Clamps
Clamp Heads
Fiber Tags
Coax Support Blocks
Vinyl Protection Caps
Universal Barrel Cushion
Grommet Cushions
PVC Sleepers
Hoisting Grips
Stainless Steel Banding
Ear Lock Buckles
Banding Tightening ToolZip Ties
Cable Tie Wraps
Hook and Loop Rolls
Cable EntryBoot Assemblies
Cushion Inserts
Cushion Plug
Port Panels
WeatherproongTape Kit
Rubber And Electrical Tape
Enclosure
Cold Shrink Kit
Pimcap
Heat ShrinkHeat Shrink Rolls
Heat Shrink
Heavy-Duty Marine Grade
Clear Heat Shrink
Ground KitsTinned Snap In Ground Kit
Universal Tinned Ground Kit
Mini Universal Tinned Ground Kit
Steel ProductsGalvanized U-Bolt Assemblies
Crossover Plates
Galvanized Clamps Halves
Pipe-To-Pipe Clamps
Grip StrutWaveguide Bridge Support Bracket
Trapeze Kit
Fence Post Cap
Waveguide Ice Bridge Kits
Galvanized Ice Bridge Posts
Waveguide Ladder Rungs
Galvanized Z Brackets
04
17
21
23
25
26
DAS/RF ComponentsRET Cable Assemblies
Low Pim Coaxial Adapter
Dummy Loads
Cap Kits
PIM Tested RF Jumper
Strut AccessoriesGalvanized Spring Nut
Strut End Caps
Square Washers
GroundingLugs
Cable Tray Jumpers
Ratchet Crimping Tool
Copper Buss Bars
Tinned Copper Buss Bars
Rack Mount Hardware Kit
Universal Ground Bar Hardware Kit
Exothermic Weld Metal
Exothermic Molds
Handle Clamp
Flint IgniterMold Scraper
Mold Brush
Grounding Hardware
Lug Washer
Tower Lighting
Safety ProductsLifting and Rigging
Tower Climbing
General PPE and Safety
Rescue
Ropes
Tower Tools
Custom ManufacturingDirectional CouplersPower Splitter
Hybrid Coupler/Matrix
RF Loads
Attenuators
Testing EquipmentAntenna Alignment Tool
31
35
36
51
54
69
72
Launch 3 Telecom 2016 [email protected] | 877.878.9134
8/19/2019 Launch 3 2016 Consumables Catalog
4/77
8/19/2019 Launch 3 2016 Consumables Catalog
5/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Cable Attachments
Stackable Snap-In Hangers General Specifications- Durable 304 Stainless Steel construction- For use on corrugated cables- Smooth edging to prevent accidental cuts to installers- Up to 3 Runs of Cable
PART # DESCRIPTION CABLE DIA MAX. CABLE DIA MIN. QUANTITY
L3-SSH-12 Stackable Snap-In Hanger for 1/2” Cable 0.640 in. 0.54 in. Kit of 10
L3-SSH-78 Stackable Snap-In Hanger for 7/8” Cable 1.220 in. 1.050 in. Kit of 10
L3-SSH-114 Stackable Snap-In Hanger for 1-1/4” Cable 1.700 in. 1.480 in. Kit of 10
L3-SSH-158 Stackable Snap-In Hanger for 1-5/8” Cable 2.050 in. 1.900 in. Kit of 10
8/19/2019 Launch 3 2016 Consumables Catalog
6/77
Launch 3 Telecom 20165
LAUNCH3TELECOM.COM
PART # DESCRIPTION CABLE DIA MAX. CABLE DIA MIN. QUANTITY
L3-BH-12 Buttery Hanger 1/2” 0.64 in. 0.41 in. Kit of 10
L3-BH-58 Buttery Hanger 5/8” 0.867 in. 0.820 in. Kit of 10
L3-BH-78 Buttery Hanger 7/8” 1.220 in. 1.050 in. Kit of 10
L3-BH-114 Buttery Hanger 1-1/4” 1.700 in. 1.480 in. Kit of 10
L3-BH-158 Buttery Hanger 1-5/8” 2.050 in. 1.900 in. Kit of 10
L3-BH-214 Buttery Hanger 2-1/4” 2.360 in. 2.290 in. Kit of 10
Snap-In Hangers General Specifications- Durable 304 Stainless Steel construction- For use on corrugated cables- Smooth edging to prevent accidental cuts to installers
Buttery Hangers
General Specifications- Durable 304 Stainless Steel construction- Compatible with corrugated, smooth wall and elliptical waveguide- 3/8” mounting hardware included- Captivated slotted SS screw and nut for tightening- Attach with banding, hose clamps, angle adapters and stand offs
PART # DESCRIPTION CABLE DIA MAX. CABLE DIA MIN. QUANTITY
L3-SI-12 Universal Snap-In Hangers 1/2” 0.640 in. 0.410 in. Kit of 10
L3-SI-58 Universal Snap-In Hangers 5/8” 0.870 in. 0.820 in. Kit of 10
L3-SI-78 Universal Snap-In Hangers 7/8” 1.220 in. 1.050 in. Kit of 10
L3-SI-114 Universal Snap-In Hangers 1-1/4” 1.700 in. 1.480 in. Kit of 10
L3-SI-158 Universal Snap-In Hangers 1-5/8” 2.050 in. 1.900 in. Kit of 10
L3-SI-214 Universal Snap-In Hangers 2-1/4” 2.360 in. 2.290 in. Kit of 10
Cable Attachments
8/19/2019 Launch 3 2016 Consumables Catalog
7/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
PART # DESCRIPTION QUANTITY
L3-AA-38 3/8” Threaded Tapped Hole Kit of 10
L3-MAA-38 Mini Angle Adapter with 3/8” Tapped Hole S.S. Kit of 10
3/8” Tapped Hole Angle Adapters
General Specifications- Heavy duty 304 Stainless Steel construction- Serrated edge grabs onto and holds steel surfaces- 1” opening- All Angle Adapters come with 3/8” Fillister/ Frankenstein bolt- Allows for various attachment points on cell-site
Universal Angle Adapters
General Specifications- Heavy duty 304 Stainless Steel construction- Serrated edge grabs onto and holds steel surfaces- 1” opening- All Angle Adapters come with 3/8” Fillister/ Frankenstein bolt- Allows for various attachment points on a cell site- Accepts up to 2 Snap-Ins
Anchor Rail Adaptersfor Snap-In Hangers
General Specifications- Durable 304 Stainless Steel construction - 3/4” hole for use with snap in hangers
PART # DESCRIPTION QUANTITY
L3-AA-U SS Angle Adapter with 3/4” hole for Snap-In Hangers Kit of 10
L3-AA-UI SS Angle Adapter with 3/4” Hole and Insert Hardware Kit of 10
L3-INSERT-38 3/8” Insert with Hardware Kit of 10
PART # DESCRIPTION QUANTITY
L3-IRA22 Anchor Rail Adapter With 3/4” Hole Kit of 10
Cable Attachments
L3-MAA-38L3-AA-38
8/19/2019 Launch 3 2016 Consumables Catalog
8/77
Launch 3 Telecom 20167
LAUNCH3TELECOM.COM
Tower Stand Off Adapterswith 3/8” Tapped Hole General Specifications- 3/8” threaded hole- Heavy duty 304 Stainless Steel construction- Accepts hose clamps and banding- All kits stand 1” off leg
- Hardware sold separately
Universal Stand Off with
3/4” Hole For Snap-Ins
General Specifications- 3/4” hole for Snap-Ins- Heavy duty 304 Stainless Steel construction- Accepts hose clamps and banding- All kits stand 1” off leg- Hardware sold separately
PART # DESCRIPTION QUANTITY
L3-SA-38 2”-3” Stand Off with 3/8” Tapped Hole Kit of 10
PART # DESCRIPTION QUANTITY
L3-SA-U 2”-3” Stand Off with 3/4”Hole. Universal Kit of 10
Cable Attachments
8/19/2019 Launch 3 2016 Consumables Catalog
9/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
PART # DESCRIPTION QUANTITY
L3-INSERT-38 3/8” Insert Kit Kit of 10
Insert Kits
General Specifications- 3/8” threaded insert with stainless steel hardware- Compatible with 3/4” stand offs and angle adapters- Includes bolts and locks
Cable Attachments
Attachment Hardware
General Specifications- Hardware Contructed from Durable 304 Stainless Steel
PART # DESCRIPTION QUANTITY
L3-BOLT38X114SS Bolt 3/8” x 1-1/4” S.S. 100 / Bag
L3-FLATWASH38SS-58 Flat Washer 3/8” x 5/8” OD S.S. 100 / Bag
L3-FLATWASH38SS-78 Flat Washer 3/8” x 7/8” OD S.S. 100 / Bag
L3-HEXNUT38SS 3/8”-16 Hex Nut 100 / Bag
L3-LOCKWASH38SS Lock Washer 3/8” S.S. 100 / Bag
L3-FLATWASH38SS-78 L3-HEXNUT38SS L3-LOCKWASH38SS
L3-FLATWASH38SS-58
L3-BOLT38X114SS
PART # DESCRIPTION QUANTITY
L3-USO-34 Stainless Universal Stand Off Adapters Kit of 10
Universal 3-WayStand Off Adapters
General Specifications- Durable 304 Stainless Steel construction- Accepts up to 1-5/8” Snap-In hangers- Accepts up to 3/4” banding
8/19/2019 Launch 3 2016 Consumables Catalog
10/77
Launch 3 Telecom 20169
LAUNCH3TELECOM.COM
PART # DESCRIPTION QUANTITY
L3-ROD-38-6-SS 3/8” x 6’ Long, Stainless Steel 304 Kit of 10
Threaded Rod
General Specifications- 3/8” x 6’ long- Cut to length to save- 304 Stainless Steel
Mini Hardware Kit
General Specifications- 3/8” bolt and star washer
PART # DESCRIPTION QUANTITY
L3-HK-38 3/8” Stainless Steel Bolt and Star Washer 10 / Pack
Cable Attachments
8/19/2019 Launch 3 2016 Consumables Catalog
11/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Stainless Steel Hose Clamps General Specifications- Marine Grade 304 Stainless Steel hose clamps- Round member adapters
Clamp Heads General Specifications- Durable 304 Stainless Steel construction- Accepts 1/2” banding or hose clamps- 3/8” hole for common hardware mounting
Fiber Tags forCable Identication General Specifications
- Simple install. Durable nylon- Easy identication system
PART # DESCRIPTION QUANTITY
L3-CH-10 Stainless Steel Clamp Heads Kit of 10
PART # DESCRIPTION QUANTITY
L3-FTAG-1.75 Fiber Tag 1.75” x 1.0” Kit of 100
PART # DESCRIPTION SAE SIZES MIN. DIA QUANTITY
L3-RM-A100 1”- 2” Hose Clamps 24 1 in. Kit of 10
L3-RM-A200 2”- 3” Hose Clamps 40 2 in. Kit of 10
L3-RM-A210 2”- 10” Hose Clamps N/A 2 in. Kit of 10
L3-RM-A350 3”- 5” Hose Clamps 72 3 in. Kit of 10
L3-RM-A500 5”- 6” Hose Clamps 88 4 in. Kit of 10
L3-RM-A200
Cable Attachments
8/19/2019 Launch 3 2016 Consumables Catalog
12/77
Launch 3 Telecom 201611
LAUNCH3TELECOM.COM
PART # DESCRIPTION QUANTITY
L3-CB-14 1/4” Coax Block Assemblies Kit of 10
L3-CB-38 3/8” Coax Block Assemblies Kit of 10
L3-CB-12 1/2” Coax Block Assemblies Kit of 10
L3-CB-78 7/8” Coax Block Assemblies Kit of 10
L3-CB-114 1-1/4” Coax Block Assemblies Kit of 10
L3-CB-158 1-5/8” Coax Block Assemblies Kit of 10
PART # DESCRIPTION QUANTITY
L3-UBC-78 Universal Barrel Cushion 4mm to 14mm for 7/8” Hanger Kit of 10
L3-UBC-114 Universal Barrel Cushion for 14mm to 25mm for 1-1/4” Hanger Kit of 10
L3-UBC-158 Universal Barrel Cushion for 14mm to 36mm for 1-5/8” Hangers Kit of 10
L3-UBC-214 Universal Barrel Cushion for 14mm to 45mm for 2-1/4” Hangers Kit of 10
L3-CB-158L3-CB-12 L3-CB-78
L3-VSC-RL-38L3-VSC-38
Coax Support Blocks
General Specifications- Durable UV resistant polypropylene material- Interior rib construction offers better cable retention- 3/8” hole accommodates common hardware
Vinyl Protection Caps
General Specifications- 3/8” Vinyl Cap for threaded rod safety caps
Universal Barrel Cushion
General Specifications- For use with Snap-Ins and coax blocks- Accepts various cable and wire sizes- Universal construction for greater cable ranges
PART # DESCRIPTION QUANTITY
L3-VSC-38 3/8” Black Vinyl Safety Cap for Threaded Rod (Cap Length 1”) 100 / Bag
L3-VSC-RL-38 3/8” Red Vinyl Safety Cap for Threaded Rod (Cap Length 1”) 100 / Bag
Cable Attachments
8/19/2019 Launch 3 2016 Consumables Catalog
13/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Grommet Cushions
General Specifications- For use with Snap-Ins and coax blocks- Accepts various cable and wire sizes
PVC Sleepers
General Specifications- Roof Top Attachment option- Heavy Duty PVC construction
PART # DESCRIPTION QUANTITY
L3-HI-14 1/2” Insert for use with 1/4” Cable Kit of 10
L3-HI-38 1/2” Insert for use with 3/8” Cable Kit of 10
L3-HI-78-7 7/8” Insert for use with 7mm - 11mm Cable Kit of 10
L3-HI-78-11 7/8” Insert for use with 11mm - 17mm Cable Kit of 10
L3-HI-114-7 1-1/4” Insert for use with 7mm - 11mm Cable Kit of 10
L3-HI-114-11 1-1/4” Insert for use with 11mm - 17mm Cable Kit of 10
L3-HI-114-17 1-1/4” Insert for use with 17mm - 20mm Cable Kit of 10
L3-HI-158-22 1-5/8” Insert for use with 22mm - 31mm Cable Kit of 10
PART # DESCRIPTION QUANTITY
L3-PVCRS-4 PVC Roof Sleeper - 4 runs 1
L3-PVCRS-8 PVC Roof Sleeper - 8 runs 1
L3-PVCRS-12 PVC Roof Sleeper - 12 runs 1
L3-PVCRS-B72 PVC Roof Sleeper - Blank 1
L3-HI-38 L3-HI-78-7 L3-HI-78-11 L3-HI-114-7 L3-HI-114-11 L3-HI-114-17 L3-HI-158-22
Cable Attachments
8/19/2019 Launch 3 2016 Consumables Catalog
14/77
Launch 3 Telecom 201613
LAUNCH3TELECOM.COM
Pre-Laced Hoisting Grips General Specifications- Durable 304 Stainless Steel construction- Oetiker Clamp included
Lace Up Hoisting Grips General Specifications- Durable 304 Stainless Steel construction
PART # DESCRIPTION QUANTITY
L3-HG-PL-14 1/4” Pre-Laced Hoisting Grip 1
L3-HG-PL-38 3/8” Pre-Laced Hoisting Grip 1
L3-HG-PL-12 1/2” Pre-Laced Hoisting Grip 1
L3-HG-PL-58 5/8” Pre-Laced Hoisting Grip 1
L3-HG-PL-78 7/8” Pre-Laced Hoisting Grip 1
L3-HG-PL-114 1-1/4” Pre-Laced Hoisting Grip 1
L3-HG-PL-158 1-5/8” Pre-Laced Hoisting Grip 1
PART # DESCRIPTION QUANTITY
L3-HG-14 1/4” Lace Up Hoisting Grip 1
L3-HG-38 3/8” Lace Up Hoisting Grip 1
L3-HG-12 1/2” Lace Up Hoisting Grip 1
L3-HG-58 5/8” Lace Up Hoisting Grip 1
L3-HG-78 7/8” Lace Up Hoisting Grip 1L3-HG-114 1-1/4” Lace Up Hoisting Grip 1
L3-HG-158 1-5/8” Lace Up Hoisting Grip 1
L3-HG-214 2-1/4” Lace Up Hoisting Grip 1
1/4” Grip Shown
1/4” Grip Shown
Cable Attachments
8/19/2019 Launch 3 2016 Consumables Catalog
15/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Stainless Steel Banding
General Specifications- Packaged in easy to use carrying case- Superior construction
Ear Lock Buckles General Specifications- Heavy duty stainless steel construction
Banding Tightening Tool
General Specifications
- Superior construction
PART # DESCRIPTION QUANTITY
L3-SSB-12 1/2” x .03” x 100’ Roll 100’ Roll
L3-SSB-34 3/4” x .03” x 100’ Roll 100’ Roll
PART # DESCRIPTION QUANTITY
L3-SSB-TOOL Banding Tightening Tool 1
PART # DESCRIPTION QUANTITY
L3-BB-12 1/2” Ear Lock Buckles 100 / Box
L3-BB-34 3/4” Ear Lock Buckles 100 / Box
Cable Attachments
8/19/2019 Launch 3 2016 Consumables Catalog
16/77
8/19/2019 Launch 3 2016 Consumables Catalog
17/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Cable Tie Wraps General Specifications- Easy installation- Hook and cinch design- May be readjusted and reused- Compare to Velcro™ brand
Hook and Loop Rolls General Specifications- Easy cable management- Reduces waste by cutting to length- Compare to Velcro™ brand
PART # DESCRIPTION QUANTITY
L3-VEL-050x75-BLACK 1/2” x 75’ Cable Tie Wrap 1 Roll
L3-VEL-075x75-BLACK 3/4” x 75’ Cable Tie Wrap 1 Roll
PART # DESCRIPTION QUANTITY
L3-VEL-050x8-BLACK 1/2” x 8” Cable Tie Wrap 100/PackL3-VEL-050x12-BLACK 1/2” x 12” Cable Tie Wrap 100/Pack
L3-VEL-075x8-BLACK 3/4” x 8” Cable Tie Wrap 100/Pack
L3-VEL-075x12-BLACK 3/4” x 12” Cable Tie Wrap 100/Pack
Cable Attachments
8/19/2019 Launch 3 2016 Consumables Catalog
18/77
Launch 3 Telecom 201617
LAUNCH3TELECOM.COM
Cable Entry
PART # DESCRIPTION QUANTITY
L3-BA-XX 4” Boot Without Insert 1
L3-BA-5X 5” Boot Without Insert 1
Boot Assemblies General Specifications- Material unaffected by ozone, sunlight or aging.- EPDM rubber- Includes two 304 stainless steel hose clamps- One piece design for easy installation- Inserts and plugs sold separately
BA-XX
L3-BA-5X
8/19/2019 Launch 3 2016 Consumables Catalog
19/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
4” Cushion Inserts
General Specifications- Designed for use in entry port boots- Durable design and construction- EPDM rubber
PART # DESCRIPTION QUANTITY
L3-CI-1-38 1 Hole for 3/8” 1
L3-CI-3-38 3 Hole for 3/8” 1
L3-CI-4-38 4 hole for 3/8” 1
L3-CI-1-12 1 Hole for 1/2” 1
L3-CI-2-12 2 Hole for 1/2” 1
L3-CI-3-12 3 Hole for 1/2” 1
L3-CI-4-12 4 Hole for 1/2” 1L3-CI-9-12 9 Hole for 1/2” 1
L3-CI-1-58 1 Hole for 5/8” 1
L3-CI-4-58 4 Hole for 5/8” 1
L3-CI-1-78 1 Hole for 7/8” 1
L3-CI-2-78 2 Hole for 7/8” 1
L3-CI-3-78 3 Hole for 7/8” 1
L3-CI-4-78 4 Hole for 7/8” 1
L3-CI-1-38
L3-CI-9-12
L3-CI-3-38
L3-CI-1-12 L3-CI-2-12 L3-CI-3-12
L3-CI-2-78L3-CI-1-78 L3-CI-4-78L3-CI-3-78
Cable Entry
8/19/2019 Launch 3 2016 Consumables Catalog
20/77
8/19/2019 Launch 3 2016 Consumables Catalog
21/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
PART # DESCRIPTION SIZE QUANTITY
L3-EPP-1x1A 1 Port Panel 5” x 5” 10 / Case
L3-EPP-1x1B 1 Port Panel 7” x 7” 10 / Case
L3-EPP-1x2 2 Port Panel 1’ 3-1/2” x 9-1/2” 10 / Case
L3-EPP-1x3 3 Port Panel 1’ 8” x 9-1/2” 10 / Case
L3-EPP-1x4 4 Port Panel 2’ 1-1/2” x 9-1/2” 10 / Case
L3-EPP-1x6 6 Port Panel 3’ 1/2” x 9-1/2” 5 / Case
L3-EPP-2x2A 4 Port Panel 11” x 11” 10 / Case
L3-EPP-2x2B 4 Port Panel 1’ 5-1/2” x 1’ 5-1/2” 10 / Case
L3-EPP-2x3 6 Port Panel 1’ 11” x 1’ 5-1/2” 10 / Case
L3-EPP-2x4 8 Port Panel 2’ 1-1/2” x 1’ 5-1/2” 5 / Case
L3-EPP-2x6 12 Port Panel 3’ 3-1/2” x 1’ 5-1/2” 5 / Case
L3-EPP-3x3 9 Port Panel 1’ 11” x 1’ 11” 5 / Case
L3-EPP-3x4 12 Port Panel 2’ 1-1/2” x 2’ 1-1/2” 5 / Case
L3-EPP-4x4 16 Port Panel 2’ 1-1/2” x 2’ 1-1/2” 5 / Case
L3-EPP-4x6 24 Port Panel 3’ 2-1/2” x 2’ 7” 5 / Case
L3-EPP-6x6 36 Port Panel 3’ 3-1/2” x 3’ 5-1/2” 5 / Case
L3-EPP-CAP Entry Port Panel Cap 4” 1
Entry Port Panels General Specifications- Heavy duty aluminum construction- Powder coat nish- Sealing caps and mounting hardware included
L3-EPP-1x1B
L3-EPP-CAPL3-EPP-1x4
Cable Entry
8/19/2019 Launch 3 2016 Consumables Catalog
22/77
Launch 3 Telecom 201621
LAUNCH3TELECOM.COM
Weatherproofing
PART # DESCRIPTION QUANTITY
L3-BUTYL 2.5” x 24” Roll 200 / Case
L3-TAPE-2 2” x 24” Wide UL Listed Electrical Tape 1
Weatherproong Tape Kit General Specifications- Universal all-weather weatherproong kit- Ideal for sealing connections- UL Listed electrical tape
Butyl Rubber And Electrical Tape General Specifications- Butyl provides additional moisture seal for cable connections- UL Listed electrical tape
PART # DESCRIPTION QUANTITY
L3-WK-U Contents: 1 Kit
- 6 Rolls Butyl Mastic (2-1/2” x 2’) - 2 Rolls Electrical Tape (3/4” x 66’)
- 1 Roll Wide Electrical Tape (2” x 20’)
L3-BUTYL
L3-TAPE-2
8/19/2019 Launch 3 2016 Consumables Catalog
23/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Weatherproong Enclosure General Specifications
- Alternative weatherproong device- Polypropylene hard case- Clean removal- Gel seal keeps water out- Single use application- High density port design
Cold Shrink Kit General Specifications- Weatherproong device- EPDM rubber construction- Seals 1/2” to 7/8” antenna and device connections- No tools required- Individually packaged
Pimcap General Specifications- Field-replaceable color-indicating silica gel desiccant- Protect against moisture intrusion- Saves time, money and effort- Dessicant changes from blue to pink to alert when moisture is present- IP68 rated, fully submersible design!- Extreme weather proo ng device for open ports- Superior design and construction to traditional dust caps
- Used by AT&T Network Disaster Recovery
Weatherproofing
PART # DESCRIPTION QUANTITY
L3-EN-12-ANT 1/2” Antenna Gel Seal Enclosure 1
PART # DESCRIPTION QUANTITY
L3-CS-1278 1/2” Through 7/8” Antenna and Device Connections 1
PART # DESCRIPTION QUANTITY
L3-DF-PIM Din Female Pimcap 50 / Case
L3-DM-PIM Din Male Pimcap 50 / Case
8/19/2019 Launch 3 2016 Consumables Catalog
24/77
Launch 3 Telecom 201623
LAUNCH3TELECOM.COM
Heat Shrink
Heat Shrink Rolls General Specifications- Crosslinked polyolen- UV Resistant- Flame retardant- Operating temp: -55ºC to +135ºC- Minimum shrink temp: 70ºC- Minimum full recovery temp: 100ºC- Shrink ratio 2:1
- RoHS compliant- Meets SAE-AMS-DTL-23053/5 Class 1 3- No adhesive- 100’ spools
PART # DESCRIPTION COLOR RATIO QUANTITY
L3-HS-.25-BLK-SP 1/4” x 100’ Spool. Thin Wall. Black 2:1 10 / Case
L3-HS-.25-CLR-SP 1/4” x 100’ Spool. Thin Wall. Clear 2:1 10 / Case
L3-HS-.375-BLK-SP 3/8” x 100’ Spool. Thin Wall. Black 2:1 10 / Case
L3-HS-.375-CLR-SP 3/8” x 100’ Spool. Thin Wall. Clear 2:1 10 / Case
L3-HS-.5-BLK-SP 1/2” x 100’ Spool. Thin Wall. Black 2:1 10 / Case
L3-HS-.5-CLR-SP 1/2” x 100’ Spool. Thin Wall. Clear 2:1 10 / Case
L3-HS-1.0-BLK-SP 1.0” x 100’ Spool. Thin Wall. Black 2:1 7 / Case
L3-HS-1.0-CLR-SP 1.0” x 100’ Spool. Thin Wall Clear 2:1 7 / Case
L3-HS-.5-BLK-SP L3-HS-.5-CLR-SP
8/19/2019 Launch 3 2016 Consumables Catalog
25/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Heat Shrink General Specifications- UV Resistant, ame retardant- Operating temp: -55ºC to +125ºC- Minimum shrink temp: 70ºC. Minimum full recovery temp: 110ºC- Shrink ratio 3:1- RoHS compliant- Meets SAE-AMS-DTL-23053/5 Class 1 3- Cross linked adhesive lined polyolen- Co-extrusion technology- Excellent sealing and insulation properties- 4’ long adhesive lined sticks
Heavy-Duty Marine Grade
Heat Shrink
Clear Heat Shrink
Heat Shrink
PART # DESCRIPTION COLOR QUANTITY
L3-HS-.25X48 .25” x 48” with Adhesive, UL Listed Black 100 / Case
L3-HS-.50X48 .50” x 48” with Adhesive, UL Listed Black 100 / Case
L3-HS-.75X48 .75” x 48” with Adhesive, UL Listed Black 100 / Case
L3-HS-1.5X48 1.50” x 48” with Adhesive, UL Listed Black 20 / Case
L3-HS-1.5x48HD 1.50” x 48” Heavy Duty with Adhesive Black 20 / Case
L3-HS-.25X48-C .25” x 48” with Adhesive Clear 100 / Case
L3-HS-.50X48-C .50” x 48” with Adhesive Clear 100 / Case
L3-HS-1.5X48-C 1.50” x 48” with Adhesive Clear 20 / Case
8/19/2019 Launch 3 2016 Consumables Catalog
26/77
Launch 3 Telecom 201625
LAUNCH3TELECOM.COM
Ground Kits
PART # DESCRIPTION QUANTITY
L3-MINI-UGK-A Mini Universal Ground Kits for 1/4” - 5/8” Cable Sizes (5’ Lead) 20 / Case
Tinned Snap In Ground Kit General Specifications- Tinned construction for multiple cable types- Easy installation, wrap, snap in and weatherproof- Kit includes unattached lug, hardware, butyl and electrical tape
Universal Tinned Ground Kit General Specifications- Installs on 1/2” to 3” Coax- Markings allow for easy installation- Kit includes: unattached lug, hardware, butyland electrical tape
Mini Universal TinnedGround Kit General Specifications
- Installs on ¼” to 5/8” Coax- Marked for easier installation- Kit includes unattached lug, hardware, butyl and electrical tape
PART # DESCRIPTION QUANTITY
L3-TGK-12 1/2” Tinned Ground Kit. With 5’ Attached Lead (Hardware Included) 20 / Case
L3-TGK-78 7/8” Tinned Ground Kit. With 5’ Attached Lead (Hardware Included) 20 / Case
L3-TGK-114 1-1/4” Tinned Ground Kit. With 5’ Attached Lead (Hardware Included) 20 / Case
L3-TGK-158 1-5/8” Tinned Ground Kit. With 5’ Attached Lead (Hardware Included) 20 / Case
L3-TGK-158
L3-MINI-UGK-A
PART # DESCRIPTION QUANTITY
L3-UGK-A 1/2” - 2-1/4” Universal Tinned Ground Kit. With 5’ Attached Lead (Hardware Included) 20 / Case
L3-UGK-A
8/19/2019 Launch 3 2016 Consumables Catalog
27/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Galvanized U-Bolt Assemblies
General Specifications- Hot Dip Galvanized- Used to attach pipes to a variety of structures- Flat washers, lock washers and hex nuts included
Crossover Plates
General Specifications- Galvanized steel construction- Includes crossover plate, U-bolts, washers and nuts
PART # DESCRIPTION QUANTITY
L3-UB-3244 3/8” x 2-1/2” x 4” Galvanized U-Bolt Assembly 80 / Box
L3-UB-3355 3/8” x 3-5/8” x 5-1/4” Galvanized U-Bolt Assembly 60 / Box
L3-UB-4240 1/2” x 2-1/2” x 4” Galvanized U-Bolt Assembly 40 / Box
L3-UB-4352 1/2” x 3” x 5-1/4” Galvanized U-Bolt Assembly 40 / Box
L3-UB-4355 1/2” x 3-5/8” x 5” Galvanized U-Bolt Assembly 40 / Box
L3-UB-4356 1/2” x 3-5/8” x 6” Galvanized U-Bolt Assembly 25 / Box
L3-UB-4456 1/2” x 4-5/8” x 6” Galvanized U-Bolt Assembly 25 / Box
L3-UB-5456 5/8” x 4-5/8” x 6-1/2” Galvanized U-Bolt Assembly 20 / Box
PART # DESCRIPTION QUANTITY
L3-CP-2020 Crossover Plate Joins 2-3/8” to 2-3/8” OD 1
L3-CP-2025 Crossover Plate Joins 2-3/8” to 2-7/8” OD 1
L3-CP-2030 Crossover Plate Joins 2-3/8” to 3-1/2” OD 1
L3-CP-2040 Crossover Plate Joins 2-3/8” to 4-1/2” OD 1
L3-CP-2530 Crossover Plate, Joins 2-7/8” to 3-1/2” OD 1
L3-CP-3030 Crossover Plate Joins 3-1/2” to 3-1/2” OD 1
L3-CP-3040 Crossover Plate, Joins 3-1/2” to 4-1/2” OD (1/2” thick plate) 1
Steel Products
8/19/2019 Launch 3 2016 Consumables Catalog
28/77
Launch 3 Telecom 201627
LAUNCH3TELECOM.COM
Galvanized Clamps Halves General Specifications- Hot Dip Galvanized
Pipe-To-Pipe Clamps General Specifications- Galvanized Steel Construction- Includes clamp halves, threaded rods, nuts,
bolts, washers, locks
Grip Strut
General Specifications- 12 Gauge Galvanized Steel
PART # DESCRIPTION QUANTITY
L3-PC-20-10 Pipe-To-Pipe Clamp Joins Two 1-1/2” to 3-1/2” OD. Light Duty 1 Per Kit
L3-PC-30-10 Pipe-To-Pipe Clamp Joins Two 1-1/2” to 3-1/2” OD. Heavy Duty 1 Per Kit
L3-PC-35-14 Pipe-To-Pipe Clamp Joins Two 2-3/8” to 5” OD. 1 Per Kit
PART # DESCRIPTION QUANTITY
L3-GS-1-10-G 11- 3/4”x10’ Long Galvanized 12 Gauge, 5 Diamond, 3” Channel Grip Strut 1
L3-GS-2-10-G 24” x 10’ Long Galvanized 12 Gauge, 10 Diamond, 3” Channel Grip Strut 1
PART # DESCRIPTION QUANTITY
L3-V-1.5-5 3/8” x 1-1/2” x 5” Galvanized V-Clamp Half 1
L3-V-1.5-6 3/8” x 1-1/2” x 6” Galvanized V-Clamp Half 1
L3-V-1.5-7 3/8”x 1-1/2” x 7” Galvanized V-Clamp Half 1
L3-V-1.5-858 3/8” x 1-1/2” x 8-5/8” Galvanized V-Clamp Half 1
L3-SCP 1/2” x 1-1/2” x 5-7/8” Galvanized C-Clamp Half 1
L3-ACP 1/4” x 1-1/2” x 6-1/16” Galvanized C-Clamp Half 1
L3-DCP 1/2” x 2” x 8-3/8” Galvanized C-Clamp Half 1
L3-MCP 1/2” x 2”x 11-5/8” Galvanized C-Clamp Half 1
Steel Products
8/19/2019 Launch 3 2016 Consumables Catalog
29/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Waveguide Bridge
Support Bracket
General Specifications- Galvanized steel construction- Side-mounted design to support 12” or 24” waveguide bridge- U-bolt and hardware included
Trapeze Kit
General Specifications- Galvanized steel construction- Triple tee, 24” wide, three rungs- Used with waveguide bridge kits- Pre-punched with 3/4” and 7/16” holes
Fence Post Cap
General Specifications- Hot dipped Galvanized Steel Finish, For Use with 3-1/2” OD Pipe
PART # DESCRIPTION QUANTITY
L3-HH-LB24-3 24” Wide for 3-1/2” OD Legs 1
L3-HH-LB-12-3 12” Wide for 3-1/2” OD Legs 1
PART # DESCRIPTION QUANTITY
L3-TK-T12-3 Triple Tee, 12” Wide, Three Rungs 1
L3-T12-1 Individual trapeze tee rung 12” 1
L3-TK-T24-3 Triple Tee, 24” Wide, Three Rungs 1
L3-T24-1 Individual trapeze tee rung 24” 1
PART # DESCRIPTION QUANTITY
L3-FP-CAP-35 Fence Post Cap for 3-1/2” OD Pipe 1
Steel Products
8/19/2019 Launch 3 2016 Consumables Catalog
30/77
Launch 3 Telecom 201629
LAUNCH3TELECOM.COM
Steel Products
Waveguide Ice Bridge Kits
General Specifications- Hot dipped galvanized steel construction- Includes 2 horseheads, 3 triple tees, 2 pipes, 2 post caps and 1 Izzy Grip Strut
Waveguide Ice Bridge KitsWith Base Shoe Pipe
General Specifications- Hot dipped galvanized steel construction- Includes 2 horseheads, 3 triple tees, 2 pipes, 2 post caps and 1 Izzy Grip Strut
Galvanized Ice Bridge Posts
General Specifications- Schedule 40 galvanized steel
PART # DESCRIPTION QUANTITY
L3-iWGB-K110 Waveguide Bridge Kit 12” x 10’ Full Kit - 12 Gauge 1
L3- iWGB-K210 Waveguide Bridge Kit 24” x 10’ Full Kit - 12 Gauge 1
PART # DESCRIPTION QUANTITY
L3-iWGB-K110-BS Waveguide Bridge Kit 12” x 10’ with Base Shoe Pipe - Full Kit - 12 Gauge 1
L3- iWGB-K210-BS Waveguide Bridge Kit 24” x 10’ with Base Shoe Pipe - Full Kit - 12 Gauge 1
PART # DESCRIPTION QUANTITY
L3-3.5-WG-PIPE 13’6” Galvanized Waveguide Bridge Support Pipe 3.5” OD 1
L3-3.5WG-SHOE 10’6” Galvanized Waveguide Bridge Support Pipe with Base Shoe (anchors included) 1
8/19/2019 Launch 3 2016 Consumables Catalog
31/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Steel Products
Waveguide Ladder Rungs
General Specifications- Galvanized steel construction- 11 Gauge- Sold individually- Designed for buildings or towers as a cable hanging solution
Galvanized Z BracketsGeneral Specifications- Galvanized A36 Steel Construction- Pre Punched 7/16” and 3/4” mounting
PART # DESCRIPTION COVER SIZE HOLE CONFIGURATION QUANTITY
L3-LR04 4 Hole Waveguide Ladder Rung 13.5” (4) 3/4” and (3) 7/16” 1
L3-LR06 6 Hole Waveguide Ladder Rung 19.75” (6) 3/4” and (5) 7/16” 1
L3-LR09 9 Hole Waveguide Ladder Rung 28.75” (9) 3/4” and (8) 7/16” 1
L3-LR12 12 Hole Waveguide Ladder Rung 37.75” (12) 3/4” and (11) 7/16” 1
PART # DESCRIPTION QUANTITY
L3-ZB4 11” Galvanized Z Bracket, 4 Hole 1
L3-ZB8 23” Galvanized Z Bracket, 8 Hole 1
L3-ZB12 23” Galvanized Z Bracket, 12 Hole 1
L3-LR04
L3-ZB4 L3-ZB8
L3-ZB12
L3-LR09
8/19/2019 Launch 3 2016 Consumables Catalog
32/77
Launch 3 Telecom 201631
LAUNCH3TELECOM.COM
DAS/RF Components
RET AISG 2.0 Male to Female Assemblies General Specifications- AISG Compatible v 1.1 & v 2/0- Up to 300 V max.- Standard length (m) from 0.5 to 100- Terminated AISG 8 pin socket screw lock male and female- Temperature range: -15º C to +70º C, Humidity up to 100%- IP Rating: IP67- Available in per foot increments
PART # DESCRIPTION
L3-IRETC-0.5 0.5m RET AISG 2.0 Cable Assembly
L3-IRETC-1.0 1m RET AISG 2.0 Cable Assembly
L3-IRETC-2.0 2m RET AISG 2.0 Cable Assembly
L3-IRETC-3.0 3m RET AISG 2.0 Cable Assembly
L3-IRETC-4.0 4m RET AISG 2.0 Cable Assembly
L3-IRETC-5.0 5m RET AISG 2.0 Cable Assembly
L3-IRETC-6.0 6m RET AISG 2.0 Cable Assembly
L3-IRETC-7.0 7m RET AISG 2.0 Cable Assembly
L3-IRETC-8.0 8m RET AISG 2.0 Cable Assembly
L3-IRETC-9.0 9m RET AISG 2.0 Cable Assembly
L3-IRETC-10 10m RET AISG 2.0 Cable Assembly
L3-IRETC-15 15m RET AISG 2.0 Cable Assembly
L3-IRETC-20 20m RET AISG 2.0 Cable Assembly
L3-IRETC-40 40m RET AISG 2.0 Cable Assembly
L3-IRETC-50 50m RET AISG 2.0 Cable Assembly
L3-IRETC-60 60m RET AISG 2.0 Cable Assembly
L3-IRETC-80 80m RET AISG 2.0 Cable Assembly
L3-IRETC-100 100m RET AISG 2.0 Cable Assembly
L3-IRETC-200 200m RET AISG 2.0 Cable Assembly
8/19/2019 Launch 3 2016 Consumables Catalog
33/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Low Pim Coaxial Adapter General Specifications
- Tri-Metal, Low PIM and Low VSWR Coaxial Adapter
DAS/RF Components
PART # DESCRIPTION
L3-DF-DF Din Female to Din Female, Low PIM Coaxial Adapter
L3-DM-NM Din Male to N Male, Low PIM Coaxial Adapter
L3-4.3MDF-DM 4.3/10 Mini Din Female to 7/16” Din Male, Low PIM Coaxial Adapter
L3-DF-DF
L3-MDF-DM L3-MDF-DF
L3-MDM-NF L3-MDM-NM L3-NF-DM L3-NF-NF L3-NM-DF
L3-DM-NM
L3-NM-NM
L3-4.3MDF-DM
L3-NF-DF
L3-MDF-DM 4.1/9.5 Mini Din Female to 7/16” Din Male, Low PIM Coaxial Adapter
L3-MDF-DF 4.1/9.5 Mini Din Female to 7/16” Din Female, Low PIM Coaxial Adapter
L3-MDF-NF 4.1/9.5 Mini Din Female to N Female, Low PIM Coaxial Adapter
L3-MDF-NM 4.1/9.5 Mini Din Female to N Male, Low PIM Coaxial Adapter
L3-4.3MDM-DF 4.3/10 Mini Din Male to 7/16” Din Female, Low PIM Coaxial Adapter
L3-MDM-DF 4.1/9.5 Mini Din Male to 7/16” Din Female, Low PIM Coaxial Adapter
L3-DM-DM Din Male to Din Male, Low PIM Coaxial Adapter
L3-MDM-DM 4.1/9.5 Mini Din Male to 7/16” Din Male, Low PIM Coaxial Adapter
L3-MDM-NF 4.1/9.5 Mini Din Male to N Female, Low PIM Coaxial Adapter
L3-MDM-NM 4.1/9.5 Mini Din Male to N Male, Low PIM Coaxial Adapter
L3-NF-DM N Female to Din Male, Low PIM Coaxial Adapter
L3-NF-NF N Female to N Female, Low PIM Coaxial Adapter
L3-NM-DF N Male to Din Female, Low PIM Coaxial Adapter
L3-NM-NM N Male to N Male, Low PIM Coaxial Adapter
L3-NF-DF N Female to Din Female, Low PIM Coaxial Adapter
L3-MDF-NF L3-MDF-NM L3-4.3MDM-DF L3-MDM-DF L3-DM-DM L3-MDM-DM
8/19/2019 Launch 3 2016 Consumables Catalog
34/77
Launch 3 Telecom 201633
LAUNCH3TELECOM.COM
Dummy Loads General Specifications
- IP65 rated- 50 Ohm- 2 watt- Temperature rated -35ºC ±125°C- DC-3GHz frequency range
DAS/RF Components
PART # DESCRIPTION QUANTITY
L3-DM-2W-D Din Male 2 Watt Dummy Load 3Ghz 1
L3-NM-2W-D N Male 2 Watt Dummy Load 3Ghz 1
PART # DESCRIPTION QUANTITY
L3-DM-25W-D Din Male 25 Watt Dummy Load 3 Ghz 1
L3-NM-25W-D N Male 25 Watt Dummy Load 3 Ghz 1
L3-DM-50W-D Din Male 50 Watt Dummy Load 3 Ghz 1
PART # DESCRIPTION QUANTITYL3-NM-50W-D N Male 50 Watt Dummy Load 3 Ghz 1
L3- NM-100W-D N Male 100 Watt Dummy Load 3 Ghz 1
L3-DM-2W-D
L3-DM-25W-D
L3-NM-50W-D
L3-NM-25W-D
L3-NM-100W-D
L3-DM-50W-D
L3-NM-2W-D
8/19/2019 Launch 3 2016 Consumables Catalog
35/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
1/2” PIM Tested RF Jumper
General Specifications- Jumper with interface types 7-16 DIN Male and 7-16 DIN Male
- 3’ to 100’ Lengths
PART # DESCRIPTION
L3-i4-DMDM-3 RF Corrugated Copper Jumper DM to DM Pim Tested 3’ Length
L3-i4-DMDM-4 RF Corrugated Copper Jumper DM to DM Pim Tested 4’ Length
L3-i4-DMDM-6 RF Corrugated Copper Jumper DM to DM Pim Tested 6’ Length
L3-i4-DMDM-8 RF Corrugated Copper Jumper DM to DM Pim Tested 8’ Length
L3-i4-DMDM-10 RF Corrugated Copper Jumper DM to DM Pim Tested 10’ Length
L3-i4-DMDM-12 RF Corrugated Copper Jumper DM to DM Pim Tested 12’ Length
L3-i4-DMDM-20 RF Corrugated Copper Jumper DM to DM Pim Tested 20’ Length
Cap Kits General Specifications- Corrosion Resistant- IP67 Rated with a Temperature Rating of -40 Degrees C to 85 Degrees C
PART # DESCRIPTION QUANTITY
L3-DF-CK Din Female Cap Kit, Brass Cap 1
L3-MINI-DF-CK Mini Din Female Cap Kit, Works on Both 4.1-9.5 and 4.3-10 1
L3-DF-PIM Din Female Pimcap 1
L3-DF-CK L3-MINI-DF-CK
DAS/RF Components
8/19/2019 Launch 3 2016 Consumables Catalog
36/77
Launch 3 Telecom 201635
LAUNCH3TELECOM.COM
Strut Accessories
3/8” Galvanized Spring Nut
General Specifications- Galvanized Steel construction- Spring Coil Individually wrapped in plastic to eliminate damage
Strut End Caps
General Specifications- Compatible with 1-5/8” strut- Vinyl plastic composition- Safety cap to prevent cuts to installers
Square Washers
General Specifications- Hot Dipped Galvanized Steel Construction for use with 1-5/8” Strut
PART # DESCRIPTION QUANTITY
L3-GSN-38 3/8” Galvanized Spring Nut 100 / Pack
PART # DESCRIPTION COLOR QUANTITY
L3-EC-R-100 Strut Ends Caps for 1-5/8” Strut Red 100 / PackL3-EC-W-100 Strut Ends Caps for 1-5/8” Strut White 100 / Pack
PART # DESCRIPTION QUANTITY
L3-WASH2-38 Square Washer with 3/8” Hole 100 / Bag
L3-WASH2-12 Square Washer with 1/2” Hole 100 / Bag
L3-EC-R-100 L3-EC-W-100
L3-WASH2-38
8/19/2019 Launch 3 2016 Consumables Catalog
37/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Grounding
General Specifications- UL and CUL listed- High conductivity seamless copper construction- Tin plated- Long barrel- CSA certied
One Hole Lugs. No Inspection Window
PART # GAUGE STUD SIZE COLOR CODE
L3-8-14 #8 1/4” Red
L3-6-14 #6 1/4” Blue
L3-6-38 #6 3/8” Blue
L3-2S-38 2 Solid, #3, #4 3/8” Grey
L3-2-14 #2 1/4” Brown
L3-2-516 #2 5/16” Brown
L3-2-38 #2 3/8” Brown
L3-6-14 L3-2S-38 L3-2-14
8/19/2019 Launch 3 2016 Consumables Catalog
38/77
Launch 3 Telecom 201637
LAUNCH3TELECOM.COM
Two Hole Lugs. No Inspection Window
(Center to Center)
Universal Two Hole Lugs. No Inspection Window
PART # GAUGE STUD SIZE HOLE SPACING COLOR CODE
L3-1410-14 #14-#10 1/4” 5/8” (.625) Yellow
L3-1410-25-1 #14-#10 1/4” 1” Yellow
L3-1410-38-1 #14-#10 3/8” 1” Yellow
L3-82-14 #8 1/4” 5/8” (.625) Red
L3-82-10 #8 #10 5/8” (.625) Red
L3-62-14 #6 1/4” 5/8” (.625) Blue
L3-62-34 #6 1/4” 3/4” (.75) Blue
L3-62-25-1 #6 1/4” 1” Blue
L3-62-38-1 #6 3/8” 1” Blue
L3-2S2-14 2 Solid, #3, #4 1/4” 5/8” (.625) Grey
L3-2S2-38-1 2 Solid, #3, #4 3/8” 1” Grey
L3-22-14 #2 1/4” 5/8” (.625) Brown
L3-22-25-1 #2 1/4” 1” Brown
L3-22-38-1 #2 3/8” 1” Brown
L3-62-14 L3-2S2-14 L3-22-38-1
Grounding
PART # GAUGE STUD SIZE HOLE SPACING COLOR CODE
L3-62-38U #6 3/8” Slotted 3/4”-1” Blue
L3-2S2-38U 2 Solid, #3, #4 3/8” Slotted 3/4”-1” Grey
L3-22-38U #2 3/8” Slotted 3/4”-1” Brown
(Center to Center)
L3-62-38U L3-2S2-38U L3-22-38U
8/19/2019 Launch 3 2016 Consumables Catalog
39/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Barrel Splice Lugs
One Hole Lugs. WITH Inspection Window
Grounding
PART # GAUGE STUD SIZE COLOR CODE
L3-i8-14 #8 1/4” Red
L3-i6-14 #6 1/4” Blue
L3-i6-38 #6 3/8” Blue
L3-i2S-38 2 Solid, #3, #4 3/8” Grey
L3-i2-14 #2 1/4” Brown
L3-i2-38 #2 3/8” Brown
L3-i6-14L3-i8-14 L3-i2S-38 L3-i2-14
PART # GAUGE LENGTH COLOR CODE
L3-8BS #8 2-1/4” Red
L3-6BS #6 2-1/4” Blue
L3-2SBS 2 Solid, #3, #4 2-3/8” Grey
L3-2BS #2 2-1/2”” Brown
8/19/2019 Launch 3 2016 Consumables Catalog
40/77
Launch 3 Telecom 201639
LAUNCH3TELECOM.COM
Two Hole Lugs. WITH Inspection Window
PART # GAUGE STUD SIZE HOLE SPACING COLOR CODE
L3-i1410-14 #14-#10 1/4” 5/8” (.625) Yellow
L3-i1410-25-1 #14-#10 1/4” 1” Yellow
L3-i1410-38-1 #14-#10 3/8” 1” Yellow
L3-i82-14 #8 1/4” 5/8” (.625) Red
L3-i62-14 #6 1/4” 5/8” (.625) Blue
L3-i62-25-1 #6 1/4” 1” Blue
L3-i62-38-1 #6 3/8” 1” Blue
L3-i2S2-14 2 Solid, #3, #4 1/4” 5/8” (.625) Grey
L3-i2S2-38-1 2 Solid, #3, #4 3/8” 1” Grey
L3-i22-14 #2 1/4” 5/8” (.625) Brown
L3-i22-34 #2 1/4” 3/4” (.75) Brown
L3-i22-25-1 #2 1/4” 1” Brown
L3-i22-38-1 #2 3/8” 1” Brown
(Center to Center)
Grounding
L3-i62-38L3-i82-14 L3-i2S2-38-1 L3-i22-25-1
8/19/2019 Launch 3 2016 Consumables Catalog
41/77
8/19/2019 Launch 3 2016 Consumables Catalog
42/77
Launch 3 Telecom 201641
LAUNCH3TELECOM.COM
Grounding
Copper Buss Bars General Specifications- Solid 1/4” thick copper buss bars- Universal hole pattern accepts 2 hole lugs with 3/4” and/or 1” spacing- Custom patterns and hole sizes available
PART # DESCRIPTION SIZE
L3-GBU1426 Solid Copper Buss Bar 2” x 6”
L3-GBU14210 Solid Copper Buss Bar 2” X 10”
L3-GBU14212 Solid Copper Buss Bar 2” X 12”
L3-GBU14214 Solid Copper Buss Bar 2” X 14”
L3-GBU1446 Solid Copper Buss Bar 4” X 6”
L3-GBU1448 Solid Copper Buss Bar 4” X 8”
L3-GBU14410 Solid Copper Buss Bar 4” X 10”
L3-GBU14412 Solid Copper Buss Bar 4” X 12”
L3-GBU14414 Solid Copper Buss Bar 4” X 14”
L3-GBU14420 Solid Copper Buss Bar 4” X 20”
L3-GBU14424 Solid Copper Buss Bar 4” X 24”
Ratchet Crimping Tool
General Specifications- Color coded rotating die- Die includes 5 cavities: #1, #2, 2 solid (includes #3 & # 4), #6 and #8 awg
PART # DESCRIPTION
L3-IL-CRIMPER Hand Ratcheting Tool
8/19/2019 Launch 3 2016 Consumables Catalog
43/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Grounding
Tinned Copper Buss Bars
General Specifications- Solid 1/4” thick copper buss bars- Universal hole pattern accepts 2 hole lugs with 3/4” and/or 1” spacing- Custom patterns and hole sizes available
Tinned Copper Buss Bars General Specifications- Solid 1/4” thick galvanized steel buss bar- Universal hole pattern accepts 2 hole lugs with 3/4” and/or 1” spacing- Custom patterns and hole sizes available
PART # DESCRIPTION SIZE
L3-GBU1426-T Tinned Copper Buss Bar 2”x 6”
L3-GBU14210-T Tinned Copper Buss Bar 2”x 10”
L3-GBU14212-T Tinned Copper Buss Bar 2”x 12”
L3-GBU14214-T Tinned Copper Buss Bar 2”x 14”
L3-GBU14412-T Tinned Copper Buss Bar 4”x 12”
L3-GBU14414-T Tinned Copper Buss Bar 4”x 14”
L3-GBU14420-T Tinned Copper Buss Bar 4”x 20”
L3-GBU14424-T Tinned Copper Buss Bar 4”x 24”
PART # DESCRIPTION SIZE
L3-GBU14412-G Galvanized Steel construction 4” x 12”
L3-GBU14424-G Galvanized Steel Construction 4” x 24”
8/19/2019 Launch 3 2016 Consumables Catalog
44/77
Launch 3 Telecom 201643
LAUNCH3TELECOM.COM
Grounding
IzzyWeld Exothermic Weld Metal General Specifications- UL Listed
PART # DESCRIPTION QUANTITY
L3-iZ-45 #45 Shots 20 per Case
L3-iZ-65 #65 Shots 20 per Case
L3-iZ-90 #90 Shots 10 per Case
L3-iZ-115 # 115 Shots 10 per Case
Universal Ground BarHardware Kit
General Specifications- Universal Mounting Hardware
Rack Mount Hardware Kit General Specifications- 19’’ Rack mounting hardware kit, Includes
- (2)Single Space Insulator for Rack Mount Buss Bars- (4)12-14x3/4 Phillips Pan Head Screw t/f thread- (4) Insulator Bushing, Nylon, .500 OD x .260 ID x .093 Tall
PART # DESCRIPTION QUANTITY
L3-BB-HK Universal Ground Bar Hardware Kit 1
L3-BB-HK-TD Theft Deterrent Hardware Kit- 4-3/8” x 3/4” Bolts with Tool 1
PART # DESCRIPTION QUANTITY
L3-BB-HK-ISO Isolator Buss Bar Hardware Kit Kit of 50
L3-BB-HK-TD
L3-BB-HK
8/19/2019 Launch 3 2016 Consumables Catalog
45/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Grounding
Exothermic Molds
General Specifications- Popular Telecom Molds- UL Listed Exothermic System
L3-WP-2AS-2AS #2 Solid #2 Solid Parallel Connection #65 Shot
L3-SVES-2AS-1.5-4 #2 Solid 1.5” to 4” Vertical Pipe #45 Shot
L3-PT 2AS-.25 #2 Solid 0.25” thick copper bar #65 Shot
8/19/2019 Launch 3 2016 Consumables Catalog
46/77
Launch 3 Telecom 201645
LAUNCH3TELECOM.COM
Grounding
L3-SVEU 2AS-1.5-4 #2 Solid Vertical Flat #65 Shot
L3-WT 2AS-2AS #2 Solid #2 Solid Tee Connection #45 Shot
L3-SVES 2AS #2 Solid Vertical Flat Steel #45 Shot
8/19/2019 Launch 3 2016 Consumables Catalog
47/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Grounding
L3-SHEA 2AS #2 Solid Horizontal Flat #45 Shot
L3-GET 15-2AS #2 Solid 5/8” Ground Rod #90 Shot
L3-SVED 2AS-1.5-4 #2 Solid #2 Solid Wire Drop to Pipe #65 Shot
Exothermic Molds
General Specifications- Popular Telecom Molds- UL Listed Exothermic System
8/19/2019 Launch 3 2016 Consumables Catalog
48/77
Launch 3 Telecom 201647
LAUNCH3TELECOM.COM
Grounding
L3-SVED 2AS #2 Solid Vertical Flat #65 Shot
L3-SVEU 2A-1.5-4 #2 Stranded #2 Wire Up To Pipe #65 Shot
8/19/2019 Launch 3 2016 Consumables Catalog
49/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Grounding
Handle Clamp General Specifications- Compliant with all molds
PART # DESCRIPTION
L3-HANDLE-TEL Regular Handle Clamp
PART # DESCRIPTION
L3-HANDLE-CHAIN Chain Handle Clamp
PART # DESCRIPTION
L3-HANDLE-MAGNET Magnet Handle Clamp
8/19/2019 Launch 3 2016 Consumables Catalog
50/77
Launch 3 Telecom 201649
LAUNCH3TELECOM.COM
Grounding
Mold Scraper General Specifications- Used in removing slag from molds
Mold Brush General Specifications- Used in removing slag from molds
PART # DESCRIPTION
L3-SCRAPER Mold Scraper
PART # DESCRIPTION
L3-BRUSH Mold Brush
Flint Igniter General Specifications- Electrical sleeve
PART # DESCRIPTION
L3-FLINT Flint Igniter
8/19/2019 Launch 3 2016 Consumables Catalog
51/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Grounding Hardware
Grounding Hardware General Specifications- Hardware Contructed from Durable 304 Stainless Steel
PART # DESCRIPTION QUANTITY
L3-BOLT38X114SS Bolt 3/8” x 1-1/4” S.S. 100 / Bag
L3-FLATWASH38SS-58 Flat Washer 3/8” x 5/8” OD S.S. 100 / Bag
L3-FLATWASH38SS-78 Flat Washer 3/8” x 7/8” OD S.S. 100 / Bag
L3-HEXNUT38SS Hex Nut 3/8” S.S. 100 / Bag
L3-LOCKWASH38SS Lock Washer 3/8” S.S. 100 / Bag
L3-FLATWASH38SS-78 L3-HEXNUT38SS L3-LOCKWASH38SS
L3-FLATWASH38SS-58
L3-BOLT38X114SS
PART # DESCRIPTION QUANTITY
L3-LUG-WASH SS Double Lug Washer for 3/8” Hardware 100 / Pack
Lug Washer General Specifications- 1.75” x 0.75”- 1” OC Design- No overlap on bus bars- Saves time and materials- Easy Installation
8/19/2019 Launch 3 2016 Consumables Catalog
52/77
Launch 3 Telecom 201651
LAUNCH3TELECOM.COM
Tower Lighting
PART # DESCRIPTION TOWER HEIGHT
L3-TWR P/N-LK2A0MLEDSO FAA A0 Low Intensity L810 LED Double Obstruction Light 120VAC system 150–ft and under
TWR OL2VLED2
General SpecificationsIntensity: Low
Horizontal Coverage: 360°
Lamp Description: LED
Effective Candelas: 32.5 Minimum ±20%
Flashhead Height: 12” (30.88 cm)
Flashhead Length: 13.5”(34.29 cm)
Flashhead Width: 4.875”(12.38 cm)
Flashhead Lens Material: Fresnel Acrylic
Flashhead Base Material: Valox™(RED)
Power Requirements: 100 to 240V AC 50/60Hz -
Also in 12,24 and 48VDC
Lamp Current: 0.12 Amps
Weight: 5.52 lbs. (2.503 kg)
Operating Temperature: -55°C to +55°C
Wind Load: CAAA 0.5 ft²
Hub Sizes:.0.75”, 1” Or 1.25” NPT with enlarger
PART # DESCRIPTION TOWER HEIGHT
L3-TWR P/N-LK1A1MLEDSO FAA A1 120VAC Medium Intensity Red LED Type L-864 lighting system 151-ft to 350-ft
L3-TWR P/N-LK1A2/3MLEDSO FAA A2 120VAC Medium Intensity Type L-864 LED lighting system 351–ft to 700-ft
TWR LEDBEACON2General Specifications
Effective intensity 2,000 cd red night
Horizontal beam coverage = 360°
Vertical beam prole: 3° minimum
Form “C” Failure contact controller
Operating voltage: 120-240 VAC
Power consumption: Light 40 watts
Light Dimensions: 444x381mm/17.5”x15” nominal
Controller Dimensions (L x W x H):
304x355x152mm / 14”x12”x6” Nominal
Light Weight: 20.865kg/46Lbs. Nominal
Controller Weight: 6.8kg/15Lbs. Nominal
Base material: Aluminum blue power coat
Operating temperature range:
-55°C to +55°C / -67°F to +130°F
TWR STBEACON7General Specifications
Intensity: Medium
Horizontal Coverage: 360°
Vertical Beam: 3° Min
Fresnel Optics: 320 mm Lens (Patent Pending)
Lamp Description: Xenon Flashtube
Effective Candelas (Day): 20,000 ± 25%Effective Candelas (Night): 2,000 ± 25%
Number Flashes Per Minute: 40 Day/Night ± 2 FPM
Flashhead Dimensions: 17.5” x 17.5” (44.45 x 44.45 cm)
Flashhead Material: Acrylic
Flashhead Base Material: Aluminum / Blue Power Coat
Power Requirements: 120V/230V AC 60 Hz
120V/230V AC
Wattage Daymode: 95 Watts
Wattage Nightmode: 35 WattsWeight: 21 lbs. (9.54 kg)
Operating Temperature: -55°C to +55°C
Wind Load: CAAA 1.2 ft²
PART # DESCRIPTION TOWER HEIGHT
L3-TWR P/N-LK1D1LVS FAA D1 120VAC L-865 Medium Intensity White Day/Night Strobe System 151–ft to 350-ft
L3-TWR P/N-LK1D2/3LVS FAA D2 120VAC L-865 Medium Intensity White Day/Night Strobe System 351–ft to 700-ft
8/19/2019 Launch 3 2016 Consumables Catalog
53/77
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Tower Lighting
TWR STDBEACON
General Specifications
Intensity: Medium
Horizontal Coverage: 360°
Vertical Beam: 3° Min
Fresnel Optics: 320 mm Lens
Lamp Description: 2-Xenon Flashtube
Effective Candelas (Day): 20,000 ± 25%
Effective Candelas (Night): 2,000 ± 25%
Number Flashes Per Minute Day: 40 DAY / 22 NIGHT ± 2 FPM
Number Flashes Per Minute Night: 22 ± 2 FPM
Flashhead Dimensions: 28” x 17.5” (71.12 x 44.45 cm)
Flashhead Material: Acrylic
Flashhead Base Material: Aluminum / Blue Powder Coat
Power Requirements: 120V - 230V AC 50/60 Hz
Wattage Daymode: 95 Watts
Red Nightmode: 230 Watts
White Nightmode (Backup): 35 Watts
Weight: 36 lbs. (16.36 kg)
Operating Temperature: -55°C to +55°C
Wind Load: CAAA 2.1 ft²
PART # DESCRIPTION TOWER HEIGHTL3-TWR P/N-LK1E1DB2 FAA E1 120VAC L-865/864 Medium Intensity Dual L-865(Strobe)/L-864(Strobe) 151–ft to 350-ft
L3-TWR P/N-LK1E2/3DB2 FAA E2 120VAC Medium Intensity Dual L864(Red Strobe)/L865(White Strobe) 351–ft to 700-ft
PART # DESCRIPTION TOWER HEIGHT
L3-TWR P/N-LK1E1DBSL FAA E1 120VAC L-864/865 Medium Intensity Dual L-864(LED)/L-865(Strobe) 151–ft to 350-ft
L3-TWR P/N-LK1E2/3DBSL FAA E2 120VAC Medium Intensity Dual L864(Red LED)/L865(White Strobe) 351–ft to 700-ft
TWR STLDBEACON2General Specifications
Intensity: Medium
Horizontal Coverage: 360°
Vertical Beam: 3° Minimum
Fresnel Optics: 320 mm Lens
Lamp Description: 1-Xenon Flashtube & an array of LEDs
Effective Candelas (Day): 20,000 ± 25%
Effective Candelas (Night): 2,000 ± 25%
Number Flashes / Minute: 40 DAY / 30 NIGHT ± 2 FPM
Flashhead Dimensions: 28” x 17.5” (71.12 x 44.45 cm)
Flashhead Material: Acrylic
Flashhead Base Material: Aluminum / Blue Powder Coat
Power Requirements: 100V - 240V AC 50/60 Hz
Wattage Daymode: 95 Watts
Red Nightmode: 40 Watts
White Nightmode (Backup): 35 Watts
Weight: 80 lbs. (36.32 kg)
Operating Temperature: -55°C to +55°C
Wind Load: CAAA 2.1 ft²
Mounting Holes: 4- 11/16” holes spaced 90° on 13.25” (33.65 cm) bolt circle
8/19/2019 Launch 3 2016 Consumables Catalog
54/77
Launch 3 Telecom 201653
LAUNCH3TELECOM.COM
Tower Lighting
PART # DESCRIPTION TOWER HEIGHT
L3-TWR P/N-LK1E1L550 FAA E1 120VAC Medium Intensity Dual L-864(Red LED)/L-865(White LED) 151–ft to 350-ft
L3-TWR P/N-LK1E2/3L550 FAA E2 120VAC Medium Intensity Dual L864 Red (LED)/L865 White (LED) 351–ft to 700-ft
PART # DESCRIPTION TOWER HEIGHT
L3-TWR P/N-LK1D1L550 FAA D1 (or D2) 120VAC Medium Intensity L-865(White LED) lighting system 151–ft to 350-ft
L3-TWR P/N-LK1D2/3L550 FAA D1 (or D2) 120VAC Medium Intensity L-865(White LED) lighting system 351–ft to 700-ft
Effective intensity 20,000 cd white, 2,000 cd red
Horizontal beam coverage = 360°
Vertical beam prole: 3° minimum
Stabilized intensity control over operational temperature range
Form “C” Failure contact controller
Operating voltage: 120/230 VAC nominal; 50-60 Hz
Connection Details: Supplied with a combined power and
alarm connection cable
LED protection and diagnostic monitoring for optimum
reliability
Effective intensity 20,000 cd white, 2,000 cd white
Horizontal beam coverage = 360°
Vertical beam prole: 3° minimum
Stabilized intensity control over operational temperature range
Form “C” Failure contact controller
Operating voltage: 120/230 VAC nominal; 50-60 Hz
Connection Details: Supplied with a combined power and
alarm connection cable
LED protection and diagnostic monitoring for optimum
reliability
Overvoltage protection: Class D
Built in overvoltage protection, designed to meet: Class III according to IEC61643-1
HV/HC certied (Pending)
Beacon Dimensions (L x W x H ): 510x510x240mm /20.6”x 20.6”x 9.4” nominal
Controller Dimensions (L x W x H ): 381x355x152mm / 15”x14”x6” nominal
Light Weight: 13.6kg/30Lbs. Nominal
Controller Weight: 6kg/15Lbs. nominal
Design degree of protection: IP65
Operating temperature range: -55ºC to +55 ºC/-67ºF to +130ºF
Overvoltage protection: Class D
Built in overvoltage protection, designed to meet: Class III according to IEC61643-1
HV/HC certied (Pending)
Beacon Dimensions (L x W x H ): 510x510x240mm /20.6”x 20.6”x 9.4” nominal
Controller Dimensions (L x W x H ): 381x355x152mm / 15”x14”x6” nominal
Light Weight: 13.6kg/30Lbs. Nominal
Controller Weight: 6kg/15Lbs. nominal
Design degree of protection: IP65
Operating temperature range: -55ºC to +55 ºC/-67ºF to +130ºF
TWR Orga L550-864/865
General Specifications
TWR Orga L550-865General Specifications
8/19/2019 Launch 3 2016 Consumables Catalog
55/77
WestFall Pro SnatchBlockProduct Description - Rope capacity: 3/8” or 1/2” wire rope
- Sheave: 4.5”
WestFall Pro Hook SnatchBlockProduct Description - Rope capacity: 3/8” or 1/2” wire rope
- Sheave: 4.5”
WestFall Pro Weld-Lok ReinforcedStraight Capstan MountProduct Description - Patent-pending design featuring reinforced Weld-Lok™ technology
- Strong, durable, and made for tough jobs
- Load rated at 1,000 lbs
- Engineered and manufactured in the U.S.
Rock Exotica Omni-BlockSwivel PulleyProduct Description - Weight: 1.9 lbs (850 gm)
- MBS: 80kN- WLL: 20 kN
- Max Rope Diameter: 0.5” (13 mm)
- Sheave Diameter: 2.6” (66 mm)
- Certication: CE pending
WestFall Pro 4”Aluminum Side-OpeningHand Line BlockProduct Description - 7/8” rope capacity
- 2,500 lbs Safe Working Load
- Made of magnesium and aluminum alloy
- Light-weight design. Weights 6.3 Lbs
- Excellent for use with Capstan Winches
- Loaded Tested prior to shipment
WestFall Pro 3”Aluminum Side-OpeningHand Line BlockProduct Description - 3” Aluminum alloy and magnesium block
- Lightweight
- 7/8” Rope capacity
- 1.000 lbs Safe Working Load
- Excellent for use with Capstan Winches
PART #
PART #
PART # PART #
PART #
PART #
L3-2000
L3-2005
L3-2010
L3-2015
L3-SM1170 L3-P55
L3-B2500
L3-B10003” shackle snatch block, 2 tons safe working load limit
4.5” shackle snatch block, 4 tons safe working load limit
3” hook snatch block, 2 tons safe working load limit
4.5” hook snatch block, 4 tons safe working load limit
Weld-Lok straight mount for capstan Rock Exoctica Omni Block 26”W/ 20KN WLL
4” aluminum rope block, 2500# WLL
3” aluminum rope block, 1000# WLL
DESCRIPTION
DESCRIPTION
DESCRIPTION DESCRIPTION
DESCRIPTION
DESCRIPTION
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Safety Products Lifting and Rigging
8/19/2019 Launch 3 2016 Consumables Catalog
56/77
Liftex Pro-Edge PremiumPolyester Endless Web
SlingsProduct Description - 2” Width
- 1 Ply
- Rated Capacity: Vertical: 6400 lbs
Choker: 5000 lbs Basket: 12800 lbs
Tuf Tug TTMHC-1000Load Rated Carabiner
Product Description - 4.1” length- 2.2” width
- .5” gate opening
- 1,000 lb safe working load limit
- ASME B30
Tuf Tug TTMHC-1500Load Rated CarabinerProduct Description - 4-2/5” length
- 2-3/5” width
- 3/4” gate opening
- 1,500 lb safe working load limit
- ASME B30
Tuf Tug TTXLMHC-1500Load Rated Carabiner
Product Description - 8.75” length- 5.6” width
- 2.2” gate opening
- 1,500 lb safe working load limit
- ASME B30
Liftex Green Endless Round SlingsProduct Description - Reduce cost with less total rigging weight
- Easy handling and storage
- Reduce risk of back and hand injuries
- Cover abrasion will not reduce capacity
- Provides a strong grip on loads
- Provides a tighter choke with an easier release
- Working Load Limits: Vertical: 5300, Choker: 4200, Basket: 10600
- .875” Diameter
- 0.4 lbs/ft
PART # PART #
PART #
PART #
PART #
L3-EN1-92P-03
L3-EN1-92P-04
L3-EN1-92P-06
L3-EN1-92P-10
L3-TTMHC-1000
L3-TTMHC-1500
L3-TTXLHC-1500
L3-ENR2-03
L3-ENR2-04
L3-ENR2-06
L3-ENR2-08
L3-ENR2-10
Pro-Edge Prem. Polyester Endlness Web Sling 3ft
Pro-Edge Prem. Polyester Endlness Web Sling 4ft
Pro-Edge Prem. Polyester Endlness Web Sling 6ft
Pro-Edge Prem. Polyester Endlness Web Sling 10ft
1,000 SWL 4-1/10 x 2-1/5 Carabiner 1/2” Gate
1,500 SWL 4-2/5 x 2-3/5 Carabiner 3/4” Gate
1,500 SWL 8-3/4 x 2-3/5 Carabiner 2-1/5” Gate
Green Endless Round Sling 3ft
Green Endless Round Sling 4ft
Green Endless Round Sling 6ft
Green Endless Round Sling 8ft
Green Endless Round Sling 10ft
DESCRIPTION DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
Launch 3 Telecom 201655
LAUNCH3TELECOM.COM
Lifting and Rigging
8/19/2019 Launch 3 2016 Consumables Catalog
57/77
WestFall Pro 4-7/8” x 3”Steel Carabiner 1” GateProduct Description - Auto twist-lock
- Alloy steel, heat treated- 4-7/8” length - 3-1/8” width
- 1” gate opening - 45 kN MBS (10116 lbs)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
- 12CTL / 17443 / N-256G
WestFall Pro 4” x 2”Steel Carabiner 1/2” GateProduct Description - Auto twist-lock
- Alloy steel, heat treated- 4.1” length
- 2.2” width
-.5” Gate Opening
- 30 kN MBS (6744 lbs)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
- 12CTLD / 17450 / N-251G
WestFall Pro 7” x 3-3/4” SteelCarabiner 1-3/4” GateProduct Description - Auto twist-lock
- Alloy steel, heat treated
- 7” length
- 3-3/4” width
- 1-3/4” gate opening
- 35 kN MBS (7868 lbs)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
- 17435 / 2000300 / 71C09A / N-263G
WestFallPro 7” x 3-3/4” SteelCarabiner 1-1/5” GateProduct Description - Auto twist-lock
- Alloy steel, heat treated
- 7-1/10” length
- 3-3/4” width- 1-1/5” gate opening
- 50 kN MBS (11240 lbs)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
- 17460 / 2000113 / N-258G
WestFall Pro 4-7/8” X 3”Steel Carabiner 1” GateProduct Description - Auto twist lock carabiner
- Heat treated Alloy Steel
- 4-7/8” length
- 3” width
- 1” gate opening
- 50 kN MBS (11240 lbs)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
- N-248G
WestFall Pro 4-1/2” x 2-3/4”Steel Carabiner 3/4” GateProduct Description - Auto twist-lock
- Alloy steel, heat treated
- 4-2/5” length
- 2-3/5” width- 3/4” gate opening
- 41 kN MBS (9217 lbs)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
- 12CTLM / 17451 / 2000112 / N-252G
PART # PART #
PART #
PART #
PART #
PART #
L3-7400 L3-7410
L3-7420
L3-7425
L3-7401
L3-7405
4-7/8” x 3” Steel Carabiner with 1” Gate 4” x 2” Steel Carabiner with 1/2” Gate
7” x 3-3/4” Steel Carabiner with 1-3/4” Gate
7” X 3-3/4 Steel Carabiner with 1-1/5” Gate
4-7/8” x 3 Steel Carabiner 1” Gate
4-1/2” x 2-3/4” Steel Carabiner with 3/4” Gate
DESCRIPTION DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Tower Climbing
8/19/2019 Launch 3 2016 Consumables Catalog
58/77
WestFall Pro 9” x 5-1/2” SteelCarabiner 2-1/4” GateProduct Description - Auto twist-lock
- Alloy steel, heat treated- 8.75” length
- 5.6” width
- 2.2” gate opening
- 45 kN MBS (10116)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
- 17426 / 04C09B / N-265
WestFall Pro 4-3/4” x 3” AluminumCarabiner 9/10” GateProduct Description - Auto twist-lock
- Aluminum alloy
- 4-3/4” length
- 3-1/3” width
- 9/10” gate opening
- 25 kN MBS (5620 lbf)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
- 12ATL / 17442 / 2000300 / N-2854G
WestFall Pro 4-7/8 x 3-1/8”Aluminum Carabiner 7/8“ GateProduct Description - Auto twist-lock
- Alloy steel, heat treated
- 4-7/8” length
- 3-1/8” width- 7/8” gate opening
- 30 kN MBS (6744.2683)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
WestFall Pro 4-7/8 x 3” AluminumCarabiner 13/16“ GateProduct Description - Auto twist-lock
- Alloy steel, heat treated
- 4-7/8” length
- 3” width
- 13/16” gate opening
- 23 kN MBS (5060)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
WestFall Pro 8-1/2” x 5”Steel Carabiner 2” GateProduct Description - Auto twist-lock
- Alloy steel, heat treated
- 8-1/2” length
- 5” width
- 2” gate opening
- 35 kN MBS (7868 lbs)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
- 17420 / 2000114 / 04C09A / N-259G
WestFall Pro 4-1/2” x 2-1/2” StainlessSteel Carabiner 1” GateProduct Description - Auto twist-lock
- Stainless steel construction
- 4-1/2” length
- 2-1/2” width
- 1” gate opening- 23 kN MBS (5170 lbs)
- 3600 lb. (16kN) Gate
- ANSI Z359.1-2007 compliant
- N268G-CPS
PART #
PART #
PART #
PART #
PART #
PART #
L3-7430
L3-7435
L3-7436
L3-7437
L3-7440
L3-7445
7” x 4-1/2” Steel Carabiner with 2-1/4” Gate
4-3/4” x 3” Aluminum Carabiner with 9/10” Gate
4-7/8” x 3-1/8” Aluminum Carabiner 7/8” Gate
4-7/8” x 3” Aluminum Carabiner with 13/16” Gate
8-1/2” x 5” Steel Carabiner with 2” Gate
4-1/2” x 2-1/2” Steel Carabiner 1” Gate
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
Launch 3 Telecom 201657
LAUNCH3TELECOM.COM
Tower Climbing
8/19/2019 Launch 3 2016 Consumables Catalog
59/77
WestFall Pro 9”Rebar Hook 2-1/2” Gate
Product Description - Forged steel, heat treated
- 100% proof loaded @ 3,600 lbs
- Minimum breaking load: 5,000 lbs
- ANSI Z359-1 / CSA Z259.12-01
- 20.6 oz
- 13218 / N-326
WestFall Pro 11”Swiveling Rebar HookProduct Description - Swivel Rebar Hook with 3600 lbs
Gate Strength
- Forged steel, heat treated
- 100% proof loaded @ 3,600 lbs
- Minimum breaking load: 5,000 lbs
- ANSI Z359-1 (07) / CSA Z259.12-01
- Net Weight: 12 oz.
- 13329 / N-325
WestFall Pro 9” X 5” AluminumCarabiner 2” GateProduct Description - Aluminum auto-twist lock
- 5/8” x 8-5/8” x 5-1/8”
- 2” Gate Opening
- Includes pin
- 3600 lb. (16kN) Gate- Fall rated
- ANSI Z359.1-2007 compliant
- 17237 / N-2868G-CP
Westfall Pro 3/4” Gate SnaphookProduct Description - Forged steel, heat treated
- 100% Proof Loaded @ 3600 lb. 16.0 kN
- Minimum breaking load: 5000 lb. 23 kN- ANSI Z359-12-2009 CSA Z259.12
- EN 362:2004
- 13.7 oz. / 390 grams
- Length: 5”
- Width: 2-1/4”
- Throat opening: .83”
- P/N: 7465
WestFall Pro 3/4” GateSwiveling SnaphookProduct Description - Length: 7-1/16”
- Width: 2-1/4”
- Gate opening: 3/4”
- Fall Rated
- 3600 lb. (3.6M) Gate
WestFall Pro Spreader BarProduct Description - Length: 9-3/4”
- Width: 2-1/4”
- Throat opening: 3/4”
- Fall Rated
- Materials: Forged Alloy Steel;
Yellow Zinc Coating- Minimum Breaking Load: 5,000 lbs.
(22.2 kN) 3,600 lbs. (3.6M) Gate Strength
- Standards: ANSI Z359, CSA Z259.12-01,
CSA Class I Connector
PART #
PART #
PART #
PART #
PART #
PART #
L3-7450
L3-7455
L3-7460
L3-7465
L3-7466
L3-7475
9” Rebar Hook 2-1/2” Gate
11” Swivel Rebar Hook
9” x 5” Aluminum Carabiner 2” Gate
3/4” Gate Snaphook
3/4” Swivel Snaphook
Separator Snaphook
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Tower Climbing
8/19/2019 Launch 3 2016 Consumables Catalog
60/77
WestFall Pro TowerPositioning KitProduct Description - 2-1/4” Swivel Form Hook
- 3/4” Separator SnapHook- 3/4” Fall Rated Steel Carabiner
- Fall Rated
- 3600 Lbs. Gate
- ANSI Z359 Compliant
Westfall Pro 5/8”Removable Rope GrabProduct Description - Designed to easily move up and down the length of
vertical rope lifelines providing continuous fall protection.
- Panic function brakes to lock the rope grab on the lifeline
in the event of a fall.
- Polished Stainless Steel
- Minimum breaking load: 2800 Lbs 13 kn
- Meets and exceeds all industry standards.
- ANSI Z359.1
- EN 353-2, EN 362
- 20.2 oz / 572 grams
WestFall Pro Rope Grab AssemblyProduct Description
- 3’ Length- 1” Nylon Webbing
- Clear shock absorbing pack for easy inspection
- Always ANSI compliant 3,600 lb.
- 100% of the lanyards meet the ANSI Z359.13-2009 requirements
WestFall Pro 62010 Twin
Leg Shock AbsorbingLanyard with Rebar HooksProduct Description - Length - 6’
- Rebar Hooks - 2-1/4” gate opening
- Sewn on impact indicator
- Meets ANSI Z359 standards
WestFall Pro Black-MaxShock Absorbing LanyardProduct Description - Length: stretch from 4.5’ to 6’
- Rebar Hooks
- Meets ANSI Z359 standards
WestFall Pro Black-MaxShock Absorbing Lanyard
with Aluminum Rebar HooksProduct Description - Length: stretch from 4.5’ to 6’
- Aluminum rebar hooks
- Snap hook center
- Meets ANSI Z359 standards
PART #
PART #
PART #
PART #
PART #
PART #
L3-13400
L3-6050
L3-60601
L3-62010
L3-62021
L3-62022
Postioning Kit
5/8” trailing rope grab
5/8” tope grab with 3’ lanyard
Twin leg POY lanyard, steel rebar hooks
Black Max 2-Stage lanyard, steel rebar hooks
Black Max 2-Stage lanyard, aluminum rebar hooks
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
Launch 3 Telecom 201659
LAUNCH3TELECOM.COM
Tower Climbing
8/19/2019 Launch 3 2016 Consumables Catalog
61/77
WestFall Pro Ascend TowerClimbing Harness - SteelProduct Description - Sleek red and black webbing with silver stitching
- Durable front, back and side D-rings for secure
anchorage
- Locking quick-connect chest buckle
- Sewn-in hip pad with removable tool belt
- Breathable back and shoulder padding for
increased comfort
- Large adjustable seat for easy positioning
and all day comfort
- Extra utility attachment loops on seat and
belt provide secure points for hardware
WestFall Pro Ascend Welding
Tower Climbing HarnessProduct Description - High-strength Nomex® webbing with
Kevlar® core yarns.
- Steel front, back and side D-rings for
secure attachment.
- Locking quick-connect chest buckle.
- Sewn-in hip pad with removable tool belt.
- Nomex back and shoulder padding for
increased comfort and protection.
- Large adjustable seat for easy positioning
and all-day comfort.
- Extra utility attachment loops on seat and
belt provide secure points for hardware,tool lanyards and more.
WestFall Pro Ascend TowerClimbing Harness - AluminumProduct Description - Sleek black webbing with silver stitching
- Lightweight
- Aluminum front, back, and side d-rings
- Locking quick-connect chest buckle
- Sewn-in hip pad with removable tool belt
- Breathable back and shoulder padding for
increased comfort
- Large, adjustable seat for easy positioning
and all day comfort
- Extra utility attachment loops on seat and
belt provide secure points for hardware,
tool lanyards and more
DBI Sala ExoFit Tower Climbing HarnessProduct Description - Capacity: 420 lbs. (190 kg)
- Brand: DBI-SALA®
- Sub Brand: ExoFit™
- D-Ring Locations: Back Side Front Suspension
- Body Belt: Yes- Leg Strap Buckle Type: Quick Connect
- Padding Location: Shoulder/Back and Leg, Back/Hip
- Velocity Ship: Yes
- iSafe Equipped: Yes
- Thread/Stitching: Polyester
- Label: Vinyl
- Padding: Nylon, Polyester, Aerospace Mesh, EVA Foam
- Web: Polyester
- Web Keeper: Nylon, Polyethylene
- Leg Buckle: Zinc Plated Steel
- Chest Buckle: Zinc Plated Steel, E-Coat
- Torso Buckle: Zinc Plated Steel
- Physical Weight: 9.50 lbs (4.3kg)
- Product Styles: Vest Style Tower Climbing
- Product Types: Work Positioning Ladder Climbing Descent Control- Standards: OSHA 1910.66, OSHA 1926.502,
Capital Safety Gen. Mfg. Req.,
PART #
PART #
PART #
PART #
L3-88011
L3-88012
L3-88013
L3-88014
L3-88031
L3-88032
L3-88033
L3-88034
L3-88021
L3-88022
L3-88023
L3-88024
L3-1108650
L3-1108651
L3-1108652
L3-1108657
Steel ascend- S
Steel ascend- M
Steel ascend- L
Steel ascend- XL
Kevlar ascend, tower welding harness - S
Kevlar ascend, tower welding harness - M
Kevlar ascend, tower welding harness - L
Kevlar ascend, tower welding harness - XL
Aluminum ascend- S
Aluminum ascend- M
Aluminum ascend- L
Aluminum ascend- XL
Exot Tower Harness - S
Exot Tower Harness - M
Exot Tower Harness - L
Exot Tower Harness - XL
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
- Fall indicators for
safety inspection
- Easily accessible
lanyard parks
- Weight Limit: 310 lbs.
- ANSI Z359.1-2007
- Tool lanyards and more
- Fall indicators for safety
inspection
- Easily accessible lanyard parks
- Weight Limit: 310 lbs.
- ANSI Z359.1-2007
- Fall indicators for
safety inspection.
- Easily accessible lanyard parks.
- Weight limit: 310 lbs.- ANSI Z359.1-2007
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Tower Climbing
8/19/2019 Launch 3 2016 Consumables Catalog
62/77
DBI Sala ExoFit XP Tower Climbing HarnessProduct Description - Capacity: 420 lbs. (190 kg)
- Brand: DBI-SALA®
- Sub Brand: ExoFit™ XP- D-Ring Locations: Back Side Front
- Body Belt: Yes
- Leg Strap Buckle Type: Quick Connect
- Padding Location: Shoulder/Back and Leg, Back/Hip
- Velocity Ship: Yes
- iSafe Equipped: Yes
- Thread/Stitching: Polyester
- Label: Vinyl
- Padding: Nylon, Polyester, Aerospace Mesh, EVA Foam
- Web: Polyester
- Web Keeper: Nylon, Polyethylene
- Leg Buckle: Zinc Plated Steel
- Chest Buckle: Zinc Plated Steel, E-Coat- Torso Buckle: Zinc Plated Steel
- Physical Weight: 10.20 lbs (4.6kg)
- Product Styles: Vest Style Tower Climbing
- Product Types: Work Positioning Ladder Climbing Descent Control
- Standards: OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req.,
ANSI A10.32, ANSI Z359.1, ANSI Z359.3, ANSI Z359.4
Kask Super Plasma Safety HelmetProduct Description - Outer shell: ABS plastic.
- Internal shell: Styrofoam HD.
- Ventilation - 10 vents.
- Headband range: PE polythene.
- Padding: Fully washable.
- System holder: Clips external Nylon 6.6
- Size: Universal - Adjustable from 51 to 62
- Weight: 420 g
- Certication: ANSI Z89.1-2009
- Available colors: Black, Blue, Red, White.
- Made in Italy
DBI Sala ExoFit NEXTower Climbing HarnessProduct Description - Duo-Lok™: Lightweight one-handed use w/memory-t
- Revolver™: Simple and fast adjustment that locks into position
- Hybrid Comfort Padding: marries premium comfort & durability- Tech-Lite™ Aluminum d-rings: Lightweight alloy adds to comfort
- Repel Technology Webbing: Provides up to 5 times more
abrasion resistance and water repellency
- Integrated Trauma Straps
- Reective material: Provides better visibility
- Impact Indicator Stitches
- Built in carrying pocket on chest & covered labels
- Breakaway lanyard keepers
- Max Capacity 420lbs
- Harness Weight 9 lbs
- Meets or exceeds all applicable industry standards
including OSHA and ANSI including the
stringent ANSI Z359
Petzl Vertex VentHelmetProduct Description - Weight: 455 g
- Head circumference min.: 53 cm
- Head circumference max.: 63 cm
- Guarantee: 3 years
- Made in: FR
Petzl Alveo VentHelmetProduct Description
- Weight: 340 g- Head circumference min.: 53 cm
- Head circumference max.: 63 cm
- Guarantee: 3 years
- Made in: FR
PART #
PART #
PART #
L3-WHE00010
L3-A10V
L3-A20VKask Super Plasma
Petzl Vertex 2 Vent
Petzl Alveo Helmet
DESCRIPTION
DESCRIPTION
DESCRIPTION
PART #
PART #
L3-1110300
L3-1110301
L3-1110302
L3-1110303
L3-1113190
L3-1113191
L3-1113192
L3-1113193
Exot XP Tower Harness - S
Exot XP Tower Harness - M
Exot XP Tower Harness - L
Exot XP Tower Harness - XL
Exot NEX Tower Harness - S
Exot NEX Tower Harness - M
Exot NEX Tower Harness - L
Exot NEX Tower Harness - XL
DESCRIPTION
DESCRIPTION
Launch 3 Telecom 201661
LAUNCH3TELECOM.COM
Tower Climbing
8/19/2019 Launch 3 2016 Consumables Catalog
63/77
Petzl Grillon Adjustable Positioning LanyardProduct Description - Lanyard with ne adjustment system for
precise work positioning
double mode, on the harness lateral
attachment points, to distribute the weight
on the belt (user has weight on his feet):
length is adjusted by pressing on the
pivoting cam)
single mode on the harness ventral
attachment point, to distribute weight
between the waistbelt and the leg loops
(user is suspended): length is adjusted by
operating the handle while
holding the free end of the lanyard- Removable protective sheath protects the
rope from abrasive contact and favors
smooth rope glide. The protection can be
removed when the single lanyard
technique is used, to bring the user closer to the anchor.
- Certication: CE EN 358 & EN 795 C
Guardian Cross Arm StrapProduct Description - Twice as durable with dual enforced webbing
& heavy duty stitching
- The heavy duty wear pad protects the
structural webbing against abrasion & snags
- Large D-ring & standard size D-ring for pass-thru
DBI Sala Lad-Saf Wire Rope Grabwith Carabiner
Product Description - Capacity: 310 lbs. (141 kg)- Brand: DBI-SALA®
- Sub Brand: Lad-Saf
- Velocity Ship: Yes
- iSafe Equipped: No
- Label: Polyester, Stamped
- Physical Dimensions: 5.50x1.50x5.50 (in)
- Physical Weight: 1.70 lbs (0.8kg)
- Product Styles: Mobile
- Product Types: Flexible Cable Ladder Safety
- Standards: ANSI A14.3-1992,
Capital Safety Gen. Mfg. Req.
- Install Type: Temporary- Number Of Users: One
- Structure Type: Straight Ladder
Guardian 3 Foot ShockAbsorbing Lanyard withSnap HooksProduct Description - 3’ Length
- 1” Nylon Webbing
- Clear shock absorbing pack for easy inspection
- Always ANSI compliant 3,600 lb.
- 100% of the lanyards meet the
ANSI Z359.13-2009 requirements
PART #
PART # PART #
PART #
L3-L52A002
L3-L52A003
L3-10785 L3-01214
L3-61165402M Petzl Grillon
3M Petzl Grillon
Guardian 3’ Premium Cross Arm Strap Guardian 3’ Shock Lanyard, Snaphook ends
DBI Lad-Saf 3/8 Wire Rope Grab with Carabiner
DESCRIPTION
DESCRIPTION DESCRIPTION
DESCRIPTION
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
Tower Climbing
8/19/2019 Launch 3 2016 Consumables Catalog
64/77
Supply Heavy Duty Cordura BlackTop-Closing Canvas Bolt BagProduct Description - 12” height
- 9” length- 5” width
- Extra tough Cordura (1000 denier)
closing top with drawstring
- Bull-pin loop on each side
- Inside pocket
- Tunnel loop belt connection
- Up to 3” wide belt capacity
Supply Canvas Bull-Pinand Bolt BagProduct Description - 10” depth
- 5” length
- 9” width
- Bull-pin loop on each side
- Tunnel loop belt connection
- Heavy-duty construction
- Up to 3” belt capacity
Canvas Utility Bagw/ Inside PocketProduct Description - 9” length
- 10” width- 8”x3” top diameter
- Inside pocket
- Leather reinforced bottom
- Ventilation eyelet in bottom
- Snap belt connection
Supply Large BlackDeluxe Gear Equipment BagProduct Description - Huge 4.5 Cubic Ft. of Interior Storage
- ID Card Window on Side Pocket- Back panel opens to reveal a mesh vent window
- 600 Denier - PU Coated, Polyester Duck Fabric
- Four Outside Pockets
- Main Compartment: 18” x 17” x 16”
- Overall Dimensions: 29” x 17” x 16”
Jumbo Gear Bag/Backpack,
Rugged Tactical PolyesterProduct Description - Constructed of rugged tactical polyester.
Key features include: Extra large main
compartment with 4 interior mesh pockets.
Concealed shoulder straps for easy
transition from gear bag to backpack. 2
end pockets with tted storm aps and
zippered closure. Padded “grip” handle, 2 end
handles, cinch straps to keep stowed gear intact
and to prevent zipper failure.
Size: 35” x 13” x 14”
Supply Plastic BottomCanvas BucketProduct Description - 15” height
- 12” diameter
- Made of heavy-duty canvas- High-density polyethylene top ring for
strength and chemical resistance
- Reinforced high-strength webbing strap
- Black molded polypropylene bottom
- Made in the USA
PART #
PART #
PART #
PART #
PART #
PART #
L3-GM-5416TCP
L3-GM-5416T
L3-GM-5142P
L3-GM-3050
L3-54-691
L3-GM-5109S
Extra Tall Top Closing Canvas Bag
Bull-Pin and Bolt Bag, Canvas, Tunnel Loop
Large Utility Canvas Pouch with Leather Bottom
Large Gearbag
Jumbo Patrol Bag. 54.691 Fox Outdoor
Canvas Bucket with black molded bottom
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
Launch 3 Telecom 201663
LAUNCH3TELECOM.COM
Tower Climbing
8/19/2019 Launch 3 2016 Consumables Catalog
65/77
Bouton Commander Safety Glasseswith Gray Lens and Black FrameProduct Description - Lightweight, semi-rimless design offers extensive eye coverage and
all day comfort
- Bayonet style temples with non-slip rubber pads provide a secure t
- Adjustable rubber nose pads offer a custom, comfortable t
- FogLess™ lens coating to keep your lenses and vision clear
- Anti-scratch coating
- 9.5 Base curve lens
- Meets ANSI Z87.1+
- Meets CSA Z94.3
Tower Climbing Job Site Safety BannerProduct Description - Quickly and easily display OSHA required safety signs
- Made of Premium Extra-Heavy Duty UltraFlex 13oz scrim vinyl,
capable of withstanding harsh outdoor environments, ensuring a long life
- Fade and tear resistant
- Outstanding scratch resistance
- Stable down to -20°F
- Grommets allow for
convenient hanging- One banner replaces
includes (12) safety signs
Car MagnetsProduct Description - 30mm thick, heavy duty magnetized material
- Full color and custom design options available
- Optional round or square corner
Bouton Blizzard SafetyGlasses with Indoor/OutdoorBlue Lens and White FrameProduct Description - Lightweight, semi-rimless design
offers all day comfort
- Bayonet temples are rubber
co-molded for a comfortable t
- Non-slip rubber nose pads provide a secure t
- Anti-Scratch Coating
- 8 Base curve lens
- Meets ANSI Z87.1+
- Meets CSA Z94.3
Petzl Cordex LightweightBelay and Rappel GlovesProduct Description - Natural, high-quality leather
- Durable double layer of leather in high-wear areas
(ngertips, palm, between thumb and index nger)
- Back made of breathable stretch nylon
- Neoprene cuff with Velcro® closure
- Carabiner hole to attach gloves to harness
- Tan or Black
PART #
PART #
PART #
PART #
PART #
L3-250-33-0021
L3-GM-2000
L3-GM-2010
L3-CARMAGNET
L3-250-48-0226
L3-K52ST
L3-K52MT
L3-K52LT
L3-K52XLT
Bouton Optical Commander Gloss Black
4’x2’ Tower Job Site Safety Banner
6’x3’ Tower Job Site Safety Banner
Made to order. Any combination of width and heights 9”, 12”, 18”, 24”, 30”, 36” (e.g. 9” x 36” or 36” x 36”)
Bouton Optical Blizzard White Frame
Petzl Cordex Lightweight Glove - S
Petzl Cordex Lightweight Glove - M
Petzl Cordex Lightweight Glove - L
Petzl Cordex Lightweight Glove - XL
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
Launch 3 Telecom 2016 [email protected] | 877.878.9134
LAUNCH3TELECOM.COM
General PPE and Safety
8/19/2019 Launch 3 2016 Consumables Catalog
66/77
Petzl Ascension HandledRope Clamp/Ascender GrabProduct Description - Weight: 7 ounces, 195 g
- Handles ropes: 8 - 13 mm
Petzl I’D Large Self-BrakingRope DescenderProduct Description - Self-braking descender belay device with anti-panic function
- For descending a rope and for belaying, with an anti-panic function.- Anti-error safety catch to reduce the risk of an accident due to incorrect
installation of the device on the rope. The shape of the cam is designed
to improve rope glide when ascending.
- Anti-panic function is engaged if the user pulls too
strongly on the handle: brakes and stops the
descent automatically
- Locking position on the handle for positioning
while on the rope.
- Pivoting cam facilitates taking up the slack
in the rope. Can also be used to make a reversible
haul system, and for s