CNC Lathes
LC/LD SERIES
LC/LD SERIES CNC Lathes
LC/LD SerieS CNC LatheS 1
CNC Lathes
LC/LD SerieS CNC LatheS2 LC/LD SerieS CNC LatheS 3
LC34 (34.2” Swing) / LC38 (38.1” Swing)
Choice of distance between centres:1,150 / 2,150 / 3,150 / 4,150 / 5,150 / 6,150 / 7,150 / 8,150 mmSpindle Bore: 153 to 660 mm
• h4-250 ,V8-100 hydraulic turret.
• Free running centre to quill with 165 mm diameter.
• Motorised tailstock body movement.
• Fanuc Ol-tD build-in manual guide i.
• Bed width: 560mm.
LD45 (44” Swing) / LD48 (48” Swing)
Choice of distance between centres:1,200 / 2,200 / 3,200 / 4,200 / 5,200 / 6,200 / 7,200 / 8,200 mmSpindle Bore: 153 to 660 mm
• Heavy duty flat bed construction.
• Choice of turrets: h4, h6, V8.
• Choice of chucks: 3-jaw hydraulic chuck, 3-jaw pneumatic chuck, or double chucks.
• Bed width: 610 mm.
• Free running centre to quill with 165 mm diameter.
• turn-Mill function (Opt.).
• hydraulic, V8 electric, live tooling or double turrets.
LC/LD SERIES
LC Series
LD Series
CNC Lathes
Features
Headstock and Spindle
• the solid box construction casting provides excellent rigidity for heavy cutting.
• all gears in the headstock are hardened and precisely ground.
• rigid spindle is supported by high precision taper roller bearings.
• 4 steps auto gears change.
• Spindle speed ranges are automatically changed by M code.
• Infinitely variable speeds are commanded by S code.
• an auto-lubrication system is equipped for headstock gears and spindle.
• Double chucks strengthen the stability for turning a long workpiece through spindle.
Bed and Base
• Perfect one piece rigid construction.
• Bed and base are made of “Meehanite” cast iron. after proper stress relieving processes, the bed way is induction heat treated to hrC 52~54 and precisely ground. the hardened bed provides excellent stability and rigidity.
• Machine bed consists of triple “V” and 1 flat bedway.
• the front chip auger and rear chip conveyor make up an optimum chip removing system.
LC/LD SerieS CNC LatheS4 LC/LD SerieS CNC LatheS 5
LC/LD SERIES
Features
Turret, Carriage and Cross Slide
• turcite B lining is applied on cross slide and carriage for reducing friction.
• Precision ball screws are equipped on the X and Z axes.
• Z-axis ball screws are protected by a stainless steel shield to prevent rusting and chip damage.
• rigid hydraulic h4 or V8 auto tool change turret.
Tailstock
• Precision taper roller bearings are equipped on the spindle of the built-in tailstock.
• the quill is heat treated and precisely ground.
• the quill adopts a Mt#6 dead centre or live centre for small workpieces. a chuck with nose (ai-5) can be mounted on it for larger workpieces.
• the tailstock is rigidly fastened by a stopper to prevent slippage.
• the tailstock body and quill position are powered and can be controlled from the control panel.
• a selection of manual or electric operation provides easy quill positioning which saves time.
CNC Lathes
LC/LD SerieS CNC LatheS6 LC/LD SerieS CNC LatheS 7
LC/LD SERIES
LC/LD SerieS CNC LatheS LC/LD SerieS CNC LatheS8 9
CNC LathesLC/LD SERIES
Optional
H4 Hydraulic
• holds 4 tools.
• each can be quickly swiveled and clamped into cutting positions.
• Suitable for turning, facing and boring.
Double Turrets
• a combination of two turrets for machining complex workpieces at one time.
• Suitable for high production requirements.
Heavy Duty Boring Attachment
• Boring bar diameter: 6”. • Length: 1200/1500mm.
• tool size: 32mm. • Clamping diameter: 6”.
• Sleeve: 050mm~0120mm for option.
• installed on cross slide easily.
• the boring depth and diameter can be controlled by program.
• Depending on client applications, different size sleeves are available.
H4-VDI Quick Change Hydraulic Turret
• 4 way quick change.
• high repeat accuracy.
• rapid index.
3-Jaw Pneumatic Chuck
• With super concentricity and speedy clamping.
• Clamping pressure is adjustable, preventing workpieces from squeezing.
• applicable to big spindle bores.
Double Chuck Adapter and Chuck Guard
• installed in the rear of spindle where an extra chuck can be mounted.
• a workpiece, such as long shaft or pipe, clamped at both ends of spindle gets better support.
V8 Hydraulic Turret
• holds 8 tools. • random tool selection.
• high indexing accuracy and quick tool change.
• turret clamping is controlled by hydraulic power for outstanding rigidity and stability.
Roller Bracket
• equipped on the machine especially for heavy duty big diameter workpieces.
• has a wide range of clamping capacity.
3-Jaw Hydraulic Chuck
• Holds worpieces firmly and provides efficient chucking.
• Various chuck diameters to choose from.
• Both hard jaws and soft jaws are available.
Steady Rest
• 80mm quill diameter with heavy loaded bearing.
• enhance rigidity and stable performance in machining.
• Clamping capacity from 30~750mm for client’s difference requirements.
LC/LD SerieS CNC LatheS LC/LD SerieS CNC LatheS10 11
CNC LathesLC/LD SERIES
Milling Function
Five Degree Spindle Indexing System
• Spindle can be indexed in every five degrees.
• M code controls spindle indexing.
• More economical.
• equipped with hydraulic disk brake.
Contouring Machining
• X,Z and C axes can be operated sychronously to do irregular and difficult machining.
Integrated Spindle Index System with Live Tooling Turret
1 Multiple functions: turning, milling, drilling, boring, tapping and threading.2 enhanced accuracy: Prevent accuracy loss on loading and unloading.3 Save time: Complete different jobs on one machine.
Live Tooling Turret
• 12 stations live tooling turret with rapid tool change.
• easily manageadble tools.
• Powerful drilling, tapping and milling capacity.
• all of the 12 positions can use rotating tools.
C-Axis Spindle Orientation System
• high analytic servo motor integrates with high accuracy reduction gear to control the spindle micro orientation.
• Contouring machining is available.
• Spindle micro index at the required position.
• equipped with linear scale to ensure the indexing accuracy.
LC/LD SerieS CNC LatheS LC/LD SerieS CNC LatheS12 13
CNC LathesLC/LD SERIES
CNC Controller
Conversational Function – Manual Guide i
Bar Machining (Roughing):including general thread, metric thread, unified thread, PT thread and PE thread.
Threading:including general thread, metric thread, unified thread, PT thread and PE thread.
Grooving:including outer, inner and face grooving.
Canned Cycle for Drilling:including centre drilling, drilling, reaming, boring and tapping.
X Area Cutting Function:When the optional function”-X area Cutting Function” is available, it is possible to select the cutting in +X area in the cycle motions excepting hole machining processes.
STD: Fanuc Oi-TD
• tFt-LCD colour screen.
• “Manual guide i” conversational system for option.
• Powerful built-in PMC.
• Variety of display units.
• User friendly operation.
• 3D dynamic graphic display.
• help function.
• alarm history / operation history.
• Simple operation programming support tool.
• thread repair function.
Siemens 828D
• high-performance panel-based CNC control.
• robust panel front made of magnesium die-cast.
• 10.4” colour tFt display.
• Maintenance-free design (no buffer battery required).
• 4-axis simultaneous interpolation (X,Y,Z rotary axis).
• 100 settable work piece zero offsets.
• Built-in iSO code interpreter.
• Wide range of turning cycles for standard geometrics.
• Graphic CNC simulation plane data.
• all-in one for tool and magazine data.
• extension of CNC memory by user CF-card on front panel.
Fanuc Oi-tD is the standard control with a user-friendly control panel. the control is designed on the movable door which allows it to rotate 120 degrees and getting closer to the workpiece. it is very convenient for checking the tooling and observing the machining situation.
LC/LD SerieS CNC LatheS LC/LD SerieS CNC LatheS14 15
CNC LathesLC/LD SERIES
Dimension Drawings:
Machine Dimensions and Weight Machine Dimensions and Weight
LC series Between centres 1000 1500 2000 3000 4000
34”LxWxh (mm)N.W/G.W (kg)
5900x2735x217010000 / 12000
6400x2735x217010500 / 12500
6900x2735x217012000 / 14000
7900x2735x217013500 / 15700
8900x2735x217015000 / 17400
38” LxWxh (mm)N.W/G.W (kg)
5900x2735x217010500 / 12500
6400x2735x217011000 / 13000
6900x2735x217012500 / 14500
7900x2735x217014000 / 16200
8900x2735x217015500 / 17900
LC series Between centres 5000 6000 7000 8000
34”LxWxh (mm)N.W/G.W (kg)
9900x2735x217016500 / 19100
10900x2735x217018600 / 20800
10900x2735x217018600 / 20800
12900x2735x217021000 / 24200
38” LxWxh (mm)N.W/G.W (kg)
9900x2735x217017000 / 19600
10900x2735x217018500 / 21300
10900x2735x217020000 / 23000
12900x2735x217021500 / 24700
LD series Between centres 800 1000 1500 2000 3000
45”LxWxh (mm)N.W/G.W (kg)
5500x3000x225011000 / 13000
6000x3000x22509800 / 11400
6500x3000x225011500 / 13300
7000x3000x225013200 / 15200
7500x3000x225014900 / 17100
48” LxWxh (mm)N.W/G.W (kg)
5500x3000x225011500 / 13500
6000x3000x225010300 / 13800
6500x3000x225012000 / 13800
7000x3000x225013700 / 15700
15400 / 17600
LD series Between centres 4000 5000 6000 7000 8000
45”LxWxh (mm)N.W/G.W (kg)
8500x3000x225016600 / 19000
9500x3000x225018300 / 20900
11000x3000x225020600 / 22800
12000x3000x225021700 / 24700
13000x3000x225023400 / 26600
48” LxWxh (mm)N.W/G.W (kg)
8500x3000x225017100 / 19500
9500x3000x225018800 / 21400
11000x3000x225020500 / 23300
12000x3000x225022500 / 25200
13000x3000x225023900 / 27100
LC Series LD Series
LC/LD SerieS CNC LatheS LC/LD SerieS CNC LatheS16 17
CNC LathesLC/LD SERIES
Specifications – LC Series Specifications – LD Series
Model LC 34 LC 38Swing Over Bed 870mm 970mmSwing Over Cross Slide 500mm 600mmCentre height 440mm 490mmWidth of Carriage 885mmWidth of Cross Slide 350mmBetween centres 1200 / 1700 / 3000 / 2200 / 3200 / 4200 / 5200 / 6200 / 7200 / 8200 mm
Control StD. FaNUC 0itDOPt. FaNUC 2litB / SieMeNS 810D / FaGOr 8055tC
Width of Bed 560mm (22”)Bed Way 3-V way with 1 flat wayMachine Length 5900 / 6400 / 6900 / 7900 / 8900 / 9900 / 10900 / 11900 / 12900 mmHeadstock:Spindle Bore ∅105mm (4”) ∅153mm (6”) ∅230mm (9”) ∅305mm (12”)Spindle Nose a2-8 a2-11 a2-15 a2-20Spindle Speed 13~1200rpm 6.5~600rpm 6~400rpm 4~400rpmSpindle Centre Mt#6Spindle motor 22/26KW (FaNUC ∝i) (StD) / 30/37KW (OPt)Turret
turret ModeStD. h4-250 hydraulic / V8-100 hydraylic
OPt.h4-250 VDi hydraulic / Quick change turret /
V12-100L hydraulic / V12-live tooling (ODt-N-25)tool Size 32mmTailstock:Quill Diameter 165mm rotary quillQuill traverse 200mmtailstock Centre Mt#6Body Movement MotorisedQuill Movement electrical/Manual (StD) / hydraulic (OPt)Feed:X-axis rapid traverse 6M/minX-axis Ballsrew Diameter ∅40mm*p5X-axis Feed range 0.1mm/min~3000mm/minX-axis traverse 500mmX-axis Servo Motor 3KW (FaNUC ∝i)Z-axis rapid traverse 1M~5M:6M/min / 6M~8M:5M/minZ-axis Ballscrew Diameter 1M~5M:∅63mm*p10 / 6M~8M:∅80mm*p10Z-axis Feed range 0.1mm/min~3000mm/minZ-axis traverse 1000 / 1500 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 mm
Z-axis transmitting1M~3M: Directly coupling
4M~8M: Servo motor tranmitted through 1:4 precision gear reducerZ-axis Servo Motor 4KW (FaNUC ∝i)Standard AccessoriesLubrication Pump 25W
Coolant Pump StD. 1/2hP high pressureOPt. 15 bar high pressure
hydraulic Pump 2hPChip removing Front chip conveyor + rear chip conveyor
GuardStD. rear splash guard + Front two doorsOPt. Fully enclosed guarding
Notes: 1. X and Z axes actual cutting diamtere will change when euipped with different turrets. 2. Spindle speed will change according to different motors. 3. Distance between centres will change based on installing different types of tailstocks. 4. Machine between centre over 6000mm, Z-Axis linear is required to option. 5. Specification subject to change without prior notice.
Model LD 45 LD 48Swing Over Bed 1120mm 1220mmSwing Over Cross Slide 750mm 850mmCentre height 575mm 625mmWidth of Carriage 950mmWidth of Cross Slide 400mmBetween centres 800 / 1200 / 1700 / 2200 / 3200 / 4200 / 5200 / 6100 / 7100 / 8100 mm
Control StD. FaNUC 0itDOPt. FaNUC 2litB / SieMeNS 810D / FaGOr 8055tC
Width of Bed 610mm (24”)Bed Way 3-V way with 1 flat wayMachine Length 5500 / 6000 / 6500 / 7000 / 7500 / 8500 / 9500 / 11000 / 12000 / 13000 mmHeadstock:Spindle Bore ∅153mm (6”) ∅230mm (9”) ∅305mm (12”)∅305mm (12”)∅505mm (20”)Spindle Nose a2-11 a2-15 a2-20 a2-28 a2-28Spindle Speed 9~600rpm 9~500rpm 7~400rpm 6~300rpm 5~250rpmSpindle Centre Mt#6Spindle motor 22/26KW (FaNUC ∝i) (StD) / 30/37KW (OPt)Turret
turret ModeStD. h4-350 hydraulic / V8-160 hydraylic
OPt.h4-350 VDi hydraulic / Quick change turret /
V12-100L hydraulic / V12-live tooling (ODt-N-25)tool Size h4-350: 32mm / V8-160: 40mm hydraulicTailstock:Quill Diameter 165mm rotary quillQuill traverse 250mmtailstock Centre Mt#6Body Movement MotorisedQuill Movement electrical/Manual (StD) / hydraulic (OPt)Feed:X-axis rapid traverse 6M/minX-axis Ballsrew Diameter ∅40mm*p5X-axis Feed range 0.1mm/min~3000mm/minX-axis traverse 650mmX-axis Servo Motor 3KW (FaNUC ∝i)Z-axis rapid traverse 1M~5M:6M/min / 6M~8M:5M/minZ-axis Ballscrew Diameter 1M~5M:∅63mm*p10 / 6M~8M:∅80mm*p10Z-axis Feed range 0.1mm/min~3000mm/minZ-axis traverse 800 / 1000 / 1500 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 mm
Z-axis transmitting1M~3M: Directly coupling
4M~8M: 1:4 precision gear reducerZ-axis Servo Motor 4KW (FaNUC ∝i)Standard AccessoriesLubrication Pump 25W
Coolant Pump StD. 1/2hP high pressureOPt. 15 bar high pressure
hydraulic Pump 2hPChip removing Front chip conveyor + rear chip conveyor
GuardStD. rear splash guard + Front two doorsOPt. Fully enclosed guarding Only available for 1M~5M)
Notes: 1. X and Z axes actual cutting diamtere will change when euipped with different turrets. 2. Spindle speed will change according to different motors. 3. Distance between centres will change based on installing different types of tailstocks. 4. Machine between centre over 6000mm, Z-Axis linear is required to option. 5. Specification subject to change without prior notice.
Model LC LC LC LD LD LD LD
Spindle Bore 6” a2-11 9” a2-15 12” a2-20 6” a2-11 9” a2-15 12” a2-20 16” a2-28
tailstock Quill Diameter 165mm 165mm 165mm 165mm 165mm 165mm 165mm
Max. load between centre
1
6000Kgs 7000Kgs 7500Kgs 7000Kgs 8000Kgs 9000Kgs 9500Kgs
Max. load between centre plus 1 steady rest
2
8000Kgs 8500Kgs 8000Kgs 8000Kgs 9000Kgs 10000Kgs 10500Kgs
Max. load between centre plus 2 steady rest
3
9000Kgs 9500Kgs 9000Kgs 9000Kgs 10000Kgs 11000Kgs 11500Kgs
Max. load with one chuck only
4
2200Kgs 2400Kgs 2200Kgs 2200Kgs 2400Kgs 2600Kgs 2800Kgs
LC/LD SerieS CNC LatheS LC/LD SerieS CNC LatheS18 19
CNC LathesLC/LD SERIES
LC Equiped Fanuc 22/26 KW Spindle Motor (STD)
105mm Spindle Bore
105mm Spindle Bore
153mm Spindle Bore
153mm Spindle Bore
230mm Spindle Bore
230mm Spindle Bore
305mm Spindle Bore
305mm Spindle Bore
LD Equiped Fanuc 30/37 KW Spindle Motor (OPT)
Loading Capacity
0 1500 3000
Motor Speed (/min)4500 6000 7000
0
8
16
24
32Output (kw)
Out
put
(kw
)
Motor Speed VS. Output
Continuousoperating zone
26kw
22kw
22kw
18.5kw
operating zone 26
0 1000
1150
22kw
18.5kw
2000
Motor Speed (/min)3000 4000 5000 6000
0
10
20
30
40
50
Output (kw)
Out
put
(kw
)
Motor Speed VS. Output
Continuousoperating zone
3500
30min, S3 40%operating zone
37kw
30kw
0 1500 3000
Motor Speed (/min)4500 6000 7000
0
30
60
90
120
150
180Torque (N.m)
Torq
ue (N
*m)
Motor Speed VS. Torque
Continuousoperating zone
operating zone 22
0 1000
1150
2000
Motor Speed (/min)3000 4000 5000 6000
0
100
200
300
400Torque (N.m)
Torq
ue (N
*m)
Motor Speed VS. Torque
Continuousoperating zone
3500
30min, S3 40%operating zone
RMP Section
0
10000
20000
30000
40000
NM
M41
M42
M43M44
250rpm 841 499rpm 421 749rpm 280
6rpm 32813
23rpm 9170
70rpm 2983
46rpm 4585
141rpm 149169rpm 3061
211rpm 994
13rpm 16279
19rpm 10881
26rpm 8140
92rpm 2295282rpm 746
999rpm 210
RMP Section
0
10000
20000
30000
40000
50000
NM
M41
M42
M43M44
165rpm 2265 330rpm 1132 496rpm 753
9rpm 41517
24rpm 15569
64rpm 583848rpm 7784
129rpm 289772rpm 5190
193rpm 1936
18rpm 20758
28rpm 13345
37rpm 10099
96rpm 3892258rpm 1448661rpm 565
RMP Section
0
10000
20000
30000
40000
NM
M41
M42
M43M44
249rpm 843 499rpm 421 749rpm 280
6rpm 35000
22rpm 9540
70rpm 3000
45rpm 4667
140rpm 150068rpm 3088
211rpm 995
12rpm 17500
19rpm 11053
25rpm 8400
91rpm 2308281rpm 747
999rpm 210
RMP Section
0
10000
20000
30000
40000
50000
NM
M41
M42
M43
M44165rpm 2265 330rpm 1132 496rpm 753
9rpm 41517
24rpm 15569
64rpm 583848rpm 7784
129rpm 289772rpm 5190
193rpm 1936
18rpm 20758
28rpm 13345
37rpm 10099
96rpm 3892258rpm 1448667rpm 565
RMP Section
0
10000
20000
30000
40000
50000
NM
M41
M42
M43M44
184rpm 1141 369rpm 569 554rpm 379
5rpm 42000
18rpm 11667
52rpm 403845rpm 4667
104rpm 201956rpm 3750
156rpm 1346
10rpm 21000
15rpm 14000
21rpm 10000
74rpm 2838208rpm 1010
739rpm 284
RMP Section
0
10000
20000
30000
40000
50000
60000
NM
M41
M42
M43
M44126rpm 2965 252rpm 1483 378rpm 988
7rpm 53379
18rpm 20758
52rpm 7186
36rpm 10379
105rpm 355955rpm 6794
157rpm 2380
15rpm 24910
23rpm 16246
30rpm 12455
73rpm 5118210rpm 1779504rpm 741
RMP Section
0
10000
20000
30000
40000
50000
60000
NM
M41
M42
M43M44
142rpm 1479 284rpm 739 427rpm 492
4rpm 52500
15rpm 14000
40rpm 525030rpm 7000
80rpm 262546rpm 4565
120rpm 1750
8rpm 26250
12rpm 17500
17rpm 12353
61rpm 3443160rpm 1313
569rpm 369
RMP Section
0
20000
40000
60000
80000
NM
M41
M42
M43
M4498rpm 3813 196rpm 1906 294rpm 1271
6rpm 62275
14rpm 26689
42rpm 8896
28rpm 13345
82rpm 439642rpm 8896
128rpm 2919
12rpm 31138
18rpm 20758
25rpm 14946
57rpm 6555171rpm 2185392rpm 953
LC/LD SerieS CNC LatheS LC/LD SerieS CNC LatheS20 21
CNC LathesLC/LD SERIES
Side Version Interference
H4 Hydraulic
• holds 4 tools.
• each can be quickly swiveled and clamped into cutting positions.
• Suitable for turning, facing and boring.
LC34 – H4-250
• tool size: 32mm.(1) Swing over bed.(2) Swing over cross slide.
LC34 – CLT-V8-100
• tool size: 32mm.(1) Swing over bed.(2) Swing over cross slide.
LC38 – H4-250
• tool size: 32mm.(1) Swing over bed.(2) Swing over cross slide.
LC38 – CLT-V8-100
• tool size: 32mm.(1) Swing over bed.(2) Swing over cross slide.
LD45 – H4-350
• tool size: 40mm.(1) Swing over bed.(2) Swing over cross slide.
LD45 – CLT-V8-100
• tool size: 32mm.(1) Swing over bed.(2) Swing over cross slide.
LD48 – H4-350
• tool size: 40mm.(1) Swing over bed.(2) Swing over cross slide.
LD48 – CLT-V8-100
• tool size: 32mm.(1) Swing over bed.(2) Swing over cross slide.
V8 Hydraulic Turret
• holds 8 tools.
• high indexing accuracy and quick tool change.
• random tool selection.
• turret clamping is controlled by hydraulic power for outstanding rigidity and stability.
Unit 2, Saxon Park, Bond avenue
Bletchley, Milton Keynes MK1 1QU UK
tel: 44 (01908) 647707
Fax: 44 (01908) 648087
email: [email protected]
Web: www.axestatus.com
ISO9001