2012 Product Catalog
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
LM 120 Series LED Architectural Downlight
Benefits of LED Lighting
Surface Mount Cylinder
Product Information
5 YEAR LIMITED
WARRANTY
Light Emitting Design introduces the ultimate in
architectural lighting with the latest generation of LED
technology in the all-new 120 Series LED architectural
light module (LM120).
The 120 series architectural light surpasses all other
PAR38 LED light modules in the industry with its
advanced design and engineering. The LM120 light
module is designed for commercial and residential
lighting used for both indoor/outdoor applications. It fits
in most standard recessed IC or non IC housings for
retrofit or new construction.
By using proprietary technologies in the LM120, it is
able to obtain an unprecedented evenly uniform bright
light, while maximizing the life of the LED light module.
US PATENT #US2007/0062032A1; other US and
international patents pending.
•
•
•
•
•
•
•
•
•
•
Ultra low energy consumption resulting in a more green and sustainable environment
Up to 80% savings compared to filament bulbs or 60% compared to fluorescent tubes
Eliminates the costly repairs and replacements of bulbs or fluorescent tubes
Minimal environmental hazard upon disposal
Solid state electronics with no filaments or gas tubes
No harmful Ultra-Violet rays
Rugged-shatterproof & shock resistant
No ballasts or cold start problems
Increased safety with minimal risk of fire hazards
Direct replacement of incandescent Edison base bulbs and lamps
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
157mm6-3/16”
121mm4-3/4”
153mm6”
153mm6”
171mm6-3/4”
ceiling mount bracket
Light Module Models
Accessories Trim Color
LED Architectural Downlight
•
•
•
•
LM120ED-W E26/27 Standard Edison Socket / Dimmable / 3000K Warm White
LM120ED-N E26/27 Standard Edison Socket / Dimmable / 4000K Neutral White
LM120GD-W GU-24 Base Socket / Dimmable / 3000K Warm White
LM120GD-N GU-24 Base Socket / Dimmable / 4000K Neutral White
NOTE: All models are available with input voltage of 110V or 220V.
Please select desired input voltage when ordering.
•
•
•
•
White Trim
Mocha Trim
Black Trim
Gold Trim
•
• Recessed Housing for Retrofit
• Surface Mount Housing GU-24 Base Socket
Indoor / Outdoor
NH120 - Recessed Housing for New Construction
RH120 -
SMH120G -
NOTE: Surface mount housing cylinders are available in different colors.
LM 120 Series
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
Lamp External DimensionsSurface Mount Cylinder Dimensions
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
LED Architectural DownlightLM 120 Series
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
Technical Drawing
Features and Specification E26/27 STANDARD SOCKET
GU-24 STANDARD SOCKET
5 YEAR LIMITED
WARRANTY
Features and Specification
•
• CRI 85 / warm white (3000K)• CRI 80 / neutral white (4000K)• High lumen output & high efficacy• • •
• Suitable for recessed IC and non IC housings• Indoor/outdoor: Ideal for damp locations
•
•
•
• I
•
• •
• Powered by Japanese high brightness LED chip
•
LM120 Light Module designed to last 50,000 hours with a minimum of 70% Lumen Maintenance
Power consumption ONLY 12.5 WattsDimmable to 25% with selected dimmersAvailable in GU-24 Base for high efficacy line voltage
sockets
Housing
Proprietary Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED when used in environments exceeding 50°C
LM120 is manufactured using only the highest grade alloys and proprietary die-casting technology in the construction of the dome housing and heat sink to maximize performance and minimize cooling cost
Electronics
Worldwide patented MCPCB technology enables ultra low LED junction temperatures for maintenance free long life
ntegrated high efficiency LED driver and power supply: Power Factor (PFC) >0.94, Efficiency 85%
Smart circuitry with surge and transient voltage protection
Input voltage AC 110V/60Hz OR 220V/50HzPrecisely controlled constant current draw for stable
power source
Optics
Proprietary reflector and optical diffuser system enables 140° glare free comforting soft light without the uncomfortable LED “eye piercing effect”
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
LM 120 Series LED Architectural Downlight
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
LM 150 SeriesLED Architectural 6” Downlight
Surface Mount Cylinder
5 YEAR LIMITED
WARRANTY
Benefits of LED Lighting
Product Information
• Ultra low energy consumption resulting in a more green and sustainable environment
•
• Eliminates the costly repairs and replacements of bulbs or fluorescent tubes
•
•
•
•
•
•
•
Up to 80% savings compared to filament bulbs or 60% compared to fluorescent tubes
Minimal environmental hazard upon disposal
Solid state electronics with no filaments or gas tubes
No harmful Ultra-Violet rays
Rugged-shatterproof & shock resistant
No ballasts or cold start problems
Increased safety with minimal risk of fire hazards
Direct replacement of incandescent Edison base bulbs and lamps
Light Emitting Design introduces the ultimate in
architectural lighting with the latest generation of LED
technology in the all-new 150 Series LED architectural
light module (LM150).
The 150 series architectural light surpasses all other
LED light modules in the industry with its advanced
design and engineering. The LM150 light module is
designed for commercial and residential lighting used
for both indoor/outdoor applications. It fits in most
standard recessed IC or non IC housings for retrofit or
new construction.
By using proprietary technologies in the LM150, it is
able to obtain an unprecedented evenly uniform bright
light while maximizing the life of the LED light module.
US PATENT #US2007/0062032A1; other US and
international patents pending.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
LM 150 SeriesLED Architectural 6” Downlight
174mm6-7/8”
178mm7”
ceiling mount bracket
188mm7-3/8”
144mm5-5/8”
153mm6”
Light Module Models
Accessories Trim Color
•
•
•
•
LM150ED-W E26/27 Standard Edison Socket / Dimmable / 3000K Warm White
LM150ED-N E26/27 Standard Edison Socket / Dimmable / 4000K Neutral White
LM150GD-W GU-24 Base Socket / Dimmable / 3000K Warm White
LM150GD-N GU-24 Base Socket / Dimmable / 4000K Neutral White
NOTE: All models are available with input voltage of 110V or 220V.
Please select desired input voltage when ordering.
•
•
•
•
White Trim
Mocha Trim
Black Trim
Gold Trim
•
• Recessed Housing for Retrofit
• Surface Mount Housing GU-24 Base Socket
Indoor / Outdoor
NH150 - Recessed Housing for New Construction
RH150 -
SMH150G -
NOTE: Surface mount housing cylinders are available in different colors.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
Lamp External DimensionsSurface Mount Cylinder Dimensions
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
Features and Specification E26/27 STANDARD SOCKET
GU-24 STANDARD SOCKET
LM 150 SeriesLED Architectural 6” Downlight
5 YEAR LIMITED
WARRANTY
•
• CRI 85 / warm white (3000K)• CRI 80 / neutral white (4000K)• High lumen output & high efficacy• • •
• Suitable for recessed IC and non IC housings• Indoor/outdoor: Ideal for damp locations
Housing
• Proprietary Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED when used in environments exceeding 50°C• LM120 is manufactured using only the highest grade alloys and proprietary die-casting technology in the construction of the dome housing and heat sink to maximize performance and minimize cooling cost
Electronics
• Worldwide patented MCPCB technology enables ultra low LED junction temperatures for maintenance free long life • Integrated high efficiency LED driver and power supply: Power Factor (PFC) >0.94, Efficiency 85% • Smart circuitry with surge and transient voltage protection• Input Voltage AC 110V/60Hz OR 220V/50Hz• Precisely controlled constant current draw for stable power source • Powered by Japanese high brightness LED chip Optics
• Proprietary reflector and optical diffuser system enables 140° glare free comforting soft light without the uncomfortable LED “eye piercing effect”
LM150 Light Module designed to last 50,000 hours with a minimum of 70% Lumen Maintenance
Power consumption ONLY 14.5 WattsDimmable to 25% with selected dimmersAvailable in GU-24 Base for high efficacy line voltage
sockets
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
E26/27 STANDARD SOCKET
GU-24 STANDARD SOCKET
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
LM 200 SeriesLED Architectural 7-1/2” Downlight
Surface Mount Cylinder
Benefits of LED Lighting
5 YEAR LIMITED
WARRANTY
Light Emitting Design introduces the ultimate in
architectural lighting with the latest generation of LED
technology in the all-new 200 Series LED architectural
light module (LM200).
The 200 series architectural light surpasses all other
LED light modules in the industry with its advanced
design and engineering. The LM200 light module is
designed for commercial and residential lighting used
for both indoor/outdoor applications. It fits in most
standard recessed IC or non IC housings for retrofit or
new construction.
By using proprietary technologies in the LM200, it is
able to obtain an unprecedented evenly uniform bright
light while maximizing the life of the LED light module.
US PATENT #US2007/0062032A1; other US and
international patents pending.
Product Information
• Ultra low energy consumption resulting in a more green and sustainable environment
•
• Eliminates the costly repairs and replacements of bulbs or fluorescent tubes
•
•
•
•
•
•
•
Up to 80% savings compared to filament bulbs or 60% compared to fluorescent tubes
Minimal environmental hazard upon disposal
Solid state electronics with no filaments or gas tubes
No harmful Ultra-Violet rays
Rugged-shatterproof & shock resistant
No ballasts or cold start problems
Increased safety with minimal risk of fire hazards
Direct replacement of incandescent Edison base bulbs and lamps
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
LM 200 SeriesLED Architectural 7-1/2” Downlight
220mm8-5/8”
177mm7”
153mm6”
ceiling mount bracket
178mm7”
207mm8-3/16”
Light Module Models
Accessories Trim Color
•
•
•
•
LM200E-W E26/27 Standard Edison Socket / 3000K Warm White
LM200E-N E26/27 Standard Edison Socket / 4000K Neutral White
LM200G-W GU-24 Base Socket / 3000K Warm White
LM200G-N GU-24 Base Socket / 4000K Neutral White
NOTE: All models are available with input voltage of 110V or 220V.
Please select desired input voltage when ordering.
•
•
•
•
White Trim
Mocha Trim
Black Trim
Gold Trim
•
• Recessed Housing for Retrofit
• Surface Mount Housing GU-24 Base Socket
Indoor / Outdoor
NH200 - Recessed Housing for New Construction
RH200 -
SMH200G -
NOTE: Surface mount housing cylinders are available in different colors.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
Lamp External DimensionsSurface Mount Cylinder Dimensions
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
Features and Specification E26/27 STANDARD SOCKET
GU-24 STANDARD SOCKET
LM 200 SeriesLED Architectural 7-1/2” Downlight
5 YEAR LIMITED
WARRANTY
•
• CRI 85 / warm white (3000K)• CRI 80 / neutral white (4000K)• High lumen output & high efficacy• •
• •
Housing
• Proprietary Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED when used in environments exceeding 50°C• LM120 is manufactured using only the highest grade alloys and proprietary die-casting technology in the construction of the dome housing and heat sink to maximize performance and minimize cooling cost
Electronics
• Worldwide patented MCPCB technology enables ultra low LED junction temperatures for maintenance free long life • Integrated high efficiency LED driver and power supply: Power Factor (PFC) >0.94, Efficiency 85% • Smart circuitry with surge and transient voltage protection• Input voltage AC 110V/60Hz OR 220V/50Hz• Precisely controlled constant current draw for stable power source • Powered by Japanese high brightness LED chip Optics
• Proprietary reflector and optical diffuser system enables 140° glare free comforting soft light without the uncomfortable LED “eye piercing effect”
LM200 Light Module designed to last 50,000 hours with a minimum of 70% Lumen Maintenance
Power consumption ONLY 17.5 WattsAvailable in GU-24 Base for high efficacy line voltage
sockets Suitable for recessed IC and non IC housingsIndoor/outdoor: Ideal for damp locations
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
E26/27 STANDARD SOCKET
GU-24 STANDARD SOCKET
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
P5500 Series PAR38LED Architectural Light
Benefits of LED Lighting
5 YEAR LIMITED
WARRANTY
Product Information
P5500 is a high output PAR 38 LED lamp with
advanced integrated thermal technology. It comes
with a standard Edison base socket and can be used
in commercial or residential lighting for interior
applications. It has a unique patented optical system
that delivers maximum light output with an evenly
uniform light dispersion pattern, ensuring reliable
operation for commercial and hospital applications. It
is available in warm (3000K) and neutral white (4000K)
color temperatures. By using proprietary technologies in the P5500, it is
able to obtain an unprecedented evenly uniform bright
light while maximizing the life of the LED light module.
US Patent # US2007/0062032A1; other US and
International patents pending.
• Ultra low energy consumption resulting in a more green and sustainable environment
•
• Eliminates the costly repairs and replacements of bulbs or fluorescent tubes
•
•
•
•
•
•
•
Up to 80% savings compared to filament bulbs or 60% compared to fluorescent tubes
Minimal environmental hazard upon disposal
Solid state electronics with no filaments or gas tubes
No harmful Ultra-Violet rays
Rugged-shatterproof & shock resistant
No ballasts or cold start problems
Increased safety with minimal risk of fire hazards
Direct replacement of incandescent Edison base bulbs and lamps
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
Lamp External Dimensions
P5500 Series PAR38LED Architectural Light
Light Module Models
•
•
P5500D-W E26/27 Standard Edison Socket / Dimmable / 3000K Warm White
P5500D-N E26/27 Standard Edison Socket / Dimmable / 4000K Neutral White
NOTE: All models are available with input voltage of 110V or 220V.
Please select desired input voltage when ordering.
Accessories Trim Color
•
•
•
•
White Trim
Mocha Trim
Black Trim
Gold Trim
•
• Recessed Housing for Retrofit
• Surface Mount Housing GU-24 Base Socket
Indoor / Outdoor
NH5500 - Recessed Housing for New Construction
RH5500 -
SMH5500G -
NOTE: Surface mount housing cylinders are available in different colors.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
Technical Drawing
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
P5500 Series PAR38LED Architectural Light
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
Features and Specification
5 YEAR LIMITED
WARRANTY
P5500 Series PAR38LED Architectural Light
•
• CRI 85 / warm white (3000K) • CRI 80 / neutral white (4000K)• High lumen output & high efficacy• • • Suitable for IC and non IC housing for indoor commercial and residential applications
•
•
• Worldwide patented MCPCB technology enables ultra low LED junction temperatures for maintenance free long life • I
•
• •
• Powered by Lumileds High Brightness LED
•
P5500 Light Module designed to last 50,000 hours with a minimum of 70% Lumen Maintenance
Power consumption ONLY 12.5 WattsDimmable to 25% with selected dimmers
Housing
Proprietary Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED when used in environments exceeding 50°C
P5500 is manufactured using only the highest grade alloys and proprietary die-casting technology in the construction of the dome housing and heat sink to maximize performance and minimize cooling cost
Electronics
ntegrated high efficiency LED driver and power supply: Power Factor (PFC) >0.94, Efficiency 85%
Smart Circuitry with Surge and Transient Voltage Protection
Input voltage AC 110V/60Hz OR 220V/50HzPrecisely controlled constant current draw for stable
power source
Optics
Proprietary high efficacy optical design using Total Internal Reflection (TIR) to deliver light where you need it most.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
E26/27 STANDARD SOCKETE26/27 STANDARD SOCKET
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
CLM 422 LED Ceiling Luminaire Module
Benefits of LED Lighting
5 YEAR LIMITED
WARRANTY
Light Emitting Design LED Ceiling Luminaire Module is
the first truly engineered commercial grade LED office
light designed to replace fluorescent fixtures of much
higher wattage classes. The CLM 422 delivers evenly
distributed horizontal and vertical foot-candles, ideally
suited for typical work spaces and utility areas. The
four individual light modules and driver make the CLM
422 the most cost effective, commercially viable
solution available on the market today. The patented
Air Bi-Pass Convection System enables excellent
thermal management to ensure long LED life with
extended lumen maintenance and virtually zero fixture
maintenance. Unlike other lighting modules, the CLM
422 weighs only 3.0KG (6.5LB) and does not require
complicated and costly reinforcement of the ceiling.
US PATENT #US2007/0062032A1; other US and
international patents pending.
Product Information
Benefits of LED Lighting
• Ultra low energy consumption resulting in a more green and sustainable environment
•
• Eliminates the costly repairs and replacements of bulbs or fluorescent tubes
•
•
•
•
•
•
Up to 80% savings compared to filament bulbs or 60% compared to fluorescent tubes
Minimal environmental hazard upon disposal
Solid state electronics with no filaments or gas tubes
No harmful Ultra-Violet rays
Rugged-shatterproof & shock resistant
No ballasts or cold start problems
Increased safety with minimal risk of fire hazards
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
Technical Drawing
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
CLM 422 LED Ceiling Luminaire Module
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
External Dimensions
CLM 422 LED Ceiling Luminaire Module
Features and Specification
Light Module Models
• 50,000 hours with a minimum of 70% Lumen Maintenance
• • • High lumen output & high efficacy • •
• Patented Passive Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED •
• Worldwide Patented MCPCB Technology enables ultra low LED Junction temperatures for maintenance free long life • I
•
• •
• Powered by Japanese high brightness LED chip
• Proprietary reflector and optical diffuser system enables 150° glare free comforting soft light without the uncomfortable LED “eye piercing effect”
CLM422 Ceiling Luminaire Module is designed to last
CRI 85 / neutral white (4000K) CRI 82 / cool white (5000K)
Power consumption ONLY 45 WattsIndoor / non-insulated ceilings only
Light Module
CLM422 is manufactured using only the highest grade extruded alloys in the construction of each individual module to maximize performance
Electronics
ntegrated high efficiency LED driver and power supply: Power Factor (PFC) >0.95, Efficiency 88%
Smart circuitry with surge and transient Voltage Protection
Input voltage 100-240VAC 50/60HzPrecisely controlled constant current draw for stable
power source
Optics
•
• CLM422-C - 110/220VAC (5000K Cool White)
CLM422-N - 110/ 220VAC (4000K Neutral White)
NOTE: Housing frame available in different colors.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
Features and Specification
SML Series LED Surface Mount Luminaire
Derived from its predecessor (CLM 422), the SML Surface
Mount Luminaire delivers high output light with the
versatility of surface mounting anywhere. Designed to
replace fluorescent fixtures of much higher wattage in your
garage or office, the SML is ideal for everyday lighting.
The SML delivers evenly distributed horizontal and vertical
foot-candles, ideally suited for typical work spaces and
utility areas. The patented Air Bi-Pass Convention System
enables excellent thermal management to ensure long
LED life with extended lumen maintenance and virtually
zero fixture maintenance. Unlike other lighting modules,
the SML weighs only 1.0 / 0.5KG (2.21 / 1.0 LB), and does
not require complicated and costly mounting to the ceiling.
US PATENT #US2007/0062032A1; other US and
international patents pending.
Product Information
•
• CRI 85 / neutral white (4000K) • CRI 82 / cool white (5000K)• High lumen output & high efficacy• • I
• Patented Passive Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED•
•
• I
•
• •
• Powered by high brightness LED
• Proprietary reflector and optical diffuser system enables 240° glare free comforting soft light without the uncomfortable LED “eye piercing effect”
SML500 / 1000 Light Module designed to last 50,000 hours with a minimum of 70% Lumen Maintenance
Power consumption ONLY 12 / 24 Wattsndoor / outdoor IP66
Light Module
SML is manufactured using only the highest grade extruded alloys in the construction of each individual model to maximize performance
Electronics
Worldwide patented MCPCB technology enables heat to flow directly from the LED to the heat sink, allowing the LED to operate at cooler temperatures
ntegrated high efficiency LED driver and power supply: Power Factor (PFC) >0.92, Efficiency 85%
Smart circuitry with surge and transient voltage protection
Input voltage 100-240VAC 50/60Hz.Precisely controlled constant current draw for stable
power source
Optics
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
Applications
5 YEAR LIMITED
WARRANTY
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
Technical Drawing
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
LED Surface Mount Luminaire SML Series
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
External Dimensions
LED Surface Mount Luminaire
Light Module Models
•
• SML500C - 110/220VAC (5000K Cool White)
• SML1000N - 110/220VAC (4000K Neutral White)
• SML1000C - 110/220VAC (5000K Cool White)
SML500N - 110/220VAC (4000K Neutral White)
SML Series
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
IL 450 LED Industrial Light
5 YEAR LIMITED
WARRANTY
Benefits of LED LightingBenefits of LED Lighting
• Ultra low energy consumption resulting in a more green and sustainable environment
• Up to 40 - 60% savings compared to mercury / sodium & metal halide lamps of higher wattage
• Eliminates the costly repairs and replacements of bulbs or fluorescent tubes
•
•
•
•
•
•
Minimal environmental hazard upon disposal
Solid state electronics with no filaments or gas tubes
No harmful Ultra-Violet rays
Rugged-shatterproof & shock resistant
No ballasts or cold start problems
Increased safety with minimal risk of fire hazards
Product Information
IL 450 is the first truly engineered commercial grade LED
industrial light designed to replace existing high-pressure
mercury, high pressure sodium, and metal halide lamp fixtures
of much higher wattage classes. The IL 450 delivers an
enormous amount of light to where you need it most. No Light
Pollution- Light distribution designed for the industrial
working area application. Air Bi-Pass Convection System
enables excellent thermal management to ensure long LED
life with extended lumen maintenance and virtually zero
fixture maintenance. Snap & Turn spring loaded mounting
system eliminates complicated installation or mounting.
Designed specifically for industrial applications (i.e.
warehouses, factories, gas station), the integrated LED
system and driver make the IL450 the most cost effective,
commercially viable solution available on the market today.
US PATENT #US2007/0062032A1; other US and
international patents pending.
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
IL 450 LED Industrial Light
46
5
35
0
46
5
35
0
Technical Drawing
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
•
• • High lumen output & high efficacy • •
•
• L
•
•
• Worldwide Patented MCPCB Technology enables ultra low LED Junction temperatures for maintenance free long life • Integrated high efficiency LED driver and power supply: Power Factor (PFC) >0.94, Efficiency 93% •
• • Powered by Lumileds high brightness LED
•
IL 450 Light Module designed to last 50,000 hours with a minimum of 70% Lumen Maintenance
CRI 75-80
Available in neutral (4000K) / cool (5000K)white Indoor / outdoor IP68 (Waterproof)
Housing
Patented Isolated Membrane Heat Sink ®System with 360° High-Flow Convection designed to spread the heat away from the Hot Zone thereby minimizing the Junction Temperature when used in environments exceeding 50°C (122°F)
ow-profile, design enables it to be used in various spaces and applications
Patented Quick Mount Snap and Turn mounting system provides for safe and easy installation to any surface or structure
Powder coated with industrial grade Dura-Guard double layer epoxy for year round indoor/outdoor applications with industry leading 10 years protection on weather and corrosion
Electronics
Smart circuitry with surge and transient voltage protection
Input Voltage 90-277VAC 50/60 Hz
Optics
Full Cut-Off proprietary reflector and optical system providing powerful glare free uniform lighting, eliminating the uncomfortable LED “eye-piercing effect”
External Dimensions
IL 450 LED Industrial Light
Features and Specification
Light Module Models
•
• IL45075 - 110 - 277VAC / 75W
• IL45100 - 110 - 277VAC / 100W
• IL45150 - 110 - 277VAC / 150W
• IL45185 - 110 - 277VAC / 185W
IL45050 - 110 - 277VAC / 50W
NOTE: Housing available in different colors.
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
IL 450 LED Industrial Light
Mounting Option Accessories
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
SST-IL45-B Spring Loaded Snap & Turn Surface Mount
W90-IL45-60B Wall Mount Elbow Bracket
CH4-IL45-50B Chain Chandelier Hanging System
SST-IL45-H60B Spring Loaded Snap & Turn Hanging System
RWL II LED ROADWAY LIGHTING
5 YEAR LIMITED
WARRANTY
The RWLII Type II (6-9m pole pitch of 15-30m) LED
Streetlight is the industry's first two piece design. This
allows for a more uni-body housing and 360° of air
convection around the “Hot Zone” which maximizes the
surface area and increases thermal conductivity. Due to the
unique construction of the heat sink, we also are able to
obtain an unprecedented IP 68 rating (water submergible) for
all electronics contained within the LED light engine and
power supply. This is critical for harsh weather as hot and
cold temperature changes would cause parts rapidly degrade
and fail. The optical system in the RWLII gives ideal light
output for most standards with minimum light pollution, thus
eliminating the need for costly secondary optical systems.
Currently, the RWLII meets or exceeds the NHTSB (National
Highway Transportation Safety Board of USA) European CIE
and Australian standards as well as the American National
Standard Practice for Roadway Lighting.
US PATENT #US2007/0062032A1; other US and
international patents pending.
Product Information
Benefits of LED LightingBenefits of LED Lighting
• Ultra low energy consumption resulting in a more green and sustainable environment
•
• Eliminates unnecessary service and repair costs
•
•
•
•
•
•
Up to 40 - 60% savings compared to mercury / sodium & metal halide lamps of higher wattage
Minimal environmental hazard upon disposal
Increased road visibility and safety
No harmful Ultra-Violet rays
Rugged - waterproof unit
No ballasts or cold start problems
Increased safety with minimal risk of fire hazards
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
46
5
35
0
46
5
35
0
Technical Drawing
LED ROADWAY LIGHTINGRWL II
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
Optics
• Full Cut-Off optical system with no glare or light pollution • Available in Neutral White (4000K / 75 CRI) or Cool White (5000K / 70 CRI) • Ideal application for 6 to 9 meters pole height with a pole pitch of 15 to 30 meters • High lumen output & high efficacy • Designed to last 50,000 hours with a minimum of 70% Lumen Maintenance • Meets and /or exceeds NHTSB (National Highway Transportation Safety Board of USA), European CIE and Australian standards • Meets American National Standard Practice for Roadway Lighting
Housing
• Patented Isolated Membrane Heat Sink ®System with 360° High-Flow Convection designed to spread the heat away from the Hot Zone thereby minimizing the Junction Temperature when used in environments exceeding 50°C (122°F) • Powder coated with industrial grade Dura-Guard double layer epoxy for year round indoor/outdoor applications with industry leading 10 years protection on weather and corrosion
Electronics
• Worldwide Patented MCPCB Technology enables ultra low LED Junction temperatures for maintenance free long life• Integrated high efficiency LED driver and power supply Power Factor (PFC) >0.94, Efficiency 93%• Input voltage 90-277VAC 50/60 Hz• Powered by High Brightness LED
External Dimensions
RWL II LED ROADWAY LIGHTING
Features and Specification
Light Module Models
• RWL II 050 - 110 - 277VAC / 50W
• L II 075 - 110 - 277VAC / 75W
• RWL II 100 - 110 - 277Vac / 100W
• RWL II 150 - 110 - 277VAC / 150W
• RWL II 185 - 110 - 277VAC / 185W
RW
NOTE: Housing available in different colors.
L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.
2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com
2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com