Reception area at the headquarters of an
international company. This is where visitors
get their first impression of a company’s
philosophy, brand content and image:
just the right place for LED multicoloured
luminaires – whether LEDOS RGB, PHAOS
lighting tiles, lighting tubes or XENO LED
spotlights. Thanks to the latest LED tech-
nology and sophisticated electronic control
systems, PHAOS can be used to design
fascinating plays of light colour in a creative
manner: for illuminated walls in dynamic
colours, impressive lighting accents, or to
set room scenes which are full of atmosphere.
LED multicoloured luminaires can make
a room uniquely easily-remembered and
unmistakably different.
Competence focused on LEDsA new technology for dynamic light
Up-to-date technology and manufacturing
As a leading luminaire manufacturer, Zumtobel Staff
is investing heavily in the potential of innovative LED
technology. As well as carrying out intensive research
and development work, it has established a separate
ultra-modern high-performance production division for
manufacturing LED systems. Enthusiastic, highly pro-
fessional experts at workstations which are protected
against electrostatic discharge (ESD) use state-of-the-
art laboratory equipment to ensure the very highest
quality level.
Varied product range
As a result of this commitment, users can now benefit
from a perfected LED product line which is capable of
creating an extremely diverse range of lighting effects:
from static lighting points through to dynamically
changing colour scenes. The full potential of this tech-
nology still remains largely untapped. This explains why
Zumtobel Staff is determined to stay on the ball and to
turn the latest developments in LED technology into
innovative products which are opening up new horizons
for lighting design.
Fast delivery, flexibly preassembled units
Zumtobel Staff gives high priority to LED systems –
even as far as logistics are concerned. Deliveries are
correspondingly fast, and consignments are complete.
In addition, the well-thought-out modular design of
the LED luminaire components enables of delivery
customised, project-specific lighting solutions at short
notice.
E S D S E C T I O N
M A N U F A C T U R I N G
T E S T I N G
Colour and dynamism
The functional strengths of LEDs include compactness, long service life, minimal maintenance, low energy consumption,
electronic controllability, low surface temperature, positional flexibility and variable angles of radiation. Zumtobel Staff
LED multicoloured luminaires add dynamic interplay of colours to these features.
RGB technology is the magic concept which makes these colour shows possible. RGB stands for the electronically
controlled interplay of red, green and blue LEDs which
is theoretically capable of generating 16.7 million
colour hues. This can be achieved not just statically
but also in an extremely wide range of dynamic sequences: suddenly like a moving wave of light, perceptibly changing
like a chameleon or almost imperceptibly changing, like changes in daylight. Intervals between changes can vary from
3 seconds to 3 hours. Different LED designs are used in the luminaires depending on the lighting system: wired radial
LEDs, SMD LEDs or LEDs which use chip-on-board technology.
5M U LT I C O L O U R E D L U M I N A I R E S LED multicoloured luminairesFascinating interplay of colours
Controlled colour sequences
Zumtobel Staff’s diverse multicoloured luminaire
product lines offer three levels of dynamic interplay
between light and colour:
LEDOS RGB
A preset programmed chip-controlled light-colour
sequence within 15 seconds.
PHAOS ANALOG
Lighting modules controlled via an analog BUS for a
coordinated light-colour show from various PHAOS
ANALOG systems.
PHAOS DIGITAL
The sophisticated solution – controlled over a digital
lighting management BUS, with plenty of scope for
designing complex, dynamic light-colour scenarios
using several PHAOS DIGITAL systems. The sequence
is programmed by using a lighting management input
unit, a touch-panel screen or a PC.
Note: Because of technical control incompatibilities,
products in the LEDOS RGB, PHAOS ANALOG and
PHAOS DIGITAL ranges cannot be used in combination
with each other. LEDOS RGB – synchronised by identical phase relation
Farb
e
tf (50 Hz)
Col
our
The coloured light shows which can be produced using LED
multicoloured luminaires are truly eye-catching. It is not by chance
that their traditional applications include presentation and retail,
shops, showrooms and shop windows. Wherever there is a need
to attract the public’s attention, these luminaires are in their
element. Their effect is best exploited in restrained conventional
ambient lighting.
LED light showsThe magic of staging attractive settings
7L E D M U LT I C O L O U R E D L U M I N A I R E S
The real strengths of LED multicoloured luminaires come into play
in many application areas: as decorative architectural features, as
lighting accents and creating a sense of direction in museums and
art galleries, to set the mood in hotels, restaurants and bars, to
provide spiritual invigoration in health and therapy treatment areas,
or as a magnet to draw public attention to trade fair stands. This
comprehensive system portfolio offers a vast amount of creative
scope ranging from individual accent lighting through to large-scale
concepts.
The idea
The aim is to make a specific motor cycle model the centre of
attention in a dealer’s showroom.
The concept
Three XENO LED spotlights from the PHAOS ANALOG range are
spaced 1.20 m apart and directed towards the motor cycle. Each
luminaire produces light-colour sequences and sets the scene in
its own sector independently of the other two luminaires.
The effect
The dynamic colour changes in the way the three sectors are lit
alternately emphasise individual details of the motor cycle, and
the different material properties of its different components ensure
additional effects.
This catches the observer’s attention; colour and dynamism set
the stage for an exciting visual experience.
Even LEDOS RGB compact recessed lumi-
naires provide plenty of dynamism. They
contain a chip which delivers a fixed pro-
grammable colour sequence to run the de-
sired range of colours within 15 seconds with
gradual transitions between colours. These
luminaires are available in a square or a
round design, and are suitable for providing
accent lighting as well as guidance. Electrical
installation is straightforward and fast – the
luminaire is directly connected to the mains
supply. All luminaires connected to a par-
ticular line are clocked and synchronised via
the power-line frequency; the programmed
sequence is preset.
LEDOS RGB is suitable for a wide range
of uses. Its high degree of protection
(IP 67), high load-bearing capacity of up to
1,000 kg and suitability for installation in
concrete, brickwork or cavity walls means
that LEDOS RGB can be used outdoors as
well as indoors. Whether used as a single
luminaire or as a synchronised group of
luminaires – LEDOS RGB provides impressive
lighting and is therefore at home wherever
light is used to set the stage for rooms or
interior decor: in shops, hotels, restaurants,
bars, cinemas, theatres, etc.
Please also refer to pages 36 and 37 for product details, installation, mounting tips and
specification text.
LEDOS RGBBreak into the dynamic world of colour
Guide
Along access routes, in
prestigious circulation areas or
corridors, dynamic light-colour
shows produced by LEDOS
RGB lead people along the right
path and create a secure sense
of direction in areas which are
dark. This is all possible without
high energy consumption, with
little maintenance effort, and
provides plenty of scope for
attractively designed floors and
walls.
Embellish
With its lively colour changes,
LEDOS RGB brings vitality and
character to any room. Lighting
points become eye-catching
interior design features. Not just
in hotel suite bathrooms but
wherever there is a need to
create a sense of well being,
invite guests to linger or attract
attention.
Guiding, embellishing, accentuating with LEDOS RGB
11L E D O S R G B L I G H T I N G A C C E N T S
Accentuate
LEDOS RGB uses constantly
changing lighting accents to
turn even boring floor surfaces
into the focus of visual attention.
Benefits: more attractive look
and improved safety.
PHAOS ANALOGSpectacular lighting programs for any situation
See refer to pages 32–35 for PHAOS DIGITAL lighting.
14–17
22–25
26–29
30–31P H A O S C O N T R O L U N I T A N A L O G
P H A O S L I N E L E D A N A L O G
P H A O S L I G H T I N G T U B E L E D A N A L O G
P H A O S L I G H T I N G T I L E L E D A N A L O G
• Programming
• Combinations
• Bus networking
PHAOS ANALOG is a product range that comprises various luminaire models which have
one common feature: they are controlled over an analog BUS.
The range includes components for wide-areas as well as pinpoint coloured light which can
be used as stand-alone devices or in association with other systems from the same product
range in a coordinated way.
18–21P H A O S X E N O L E D A N A L O G
13P H A O S A N A L O G L I G H T I N G P R O G R A M S
Hymer “all-in-one-car” research project
• Concept study for a futuristic motorhome
• Innovative lighting featuring Zumtobel Staff
LED multicoloured luminaires, among other
fittings
• PHAOS lighting tiles create a leisure-
oriented atmosphere
• Extremely wide range of lighting scenes –
from sunset to blue sky – can be “conjured
up” at the user’s whim or chosen to match
a particular season, destination or weather
• Low surface temperature and compact
mounting dimensions for maximum crea-
tive scope
Depending on requirements, the PHAOS
lighting tile LED ANALOG can, as a presen-
tation surface or illuminated wall with dy-
namically changing colours, set the stage
for itself or for a specific object. Its brightly
and evenly lit square surface spreads light;
the colours of the light can be changed over
the entire surface or be accentuated at the
press of a button. There are practically no
limits on the choice of colours, and the pace
and transition speed of colour changes are
always variable.
Technical details
• PHAOS lighting tiles LED ANALOG
measure 228 x 228 mm and can be used
as stand-alone units or, alternatively,
can be driven and programmed using an
analog BUS
• They can be installed in a variety of
positions. A special mounting frame is
available for wall mounting
• The titanium coloured die-cast aluminium
housing ensures optimum heat dissipation
for safety and a long service life
• Rugged sandwich construction with rear
and front reflector sheets and high-grade
acrylic diffuser panel
• When fitted with optional special power
supply unit, the luminaire meets protection
class III specifications (SELV)
Please also refer to pages 36 and 37 for
further product details, installation and
mounting tips and specification text.
PHAOS lighting tileLED ANALOGA wealth of colours in one square
Plenty of creative scopeLight as the link between stressand stress relief
The lighting tile is versatile, has a wide
range of possible applications and opens
up vast scope for creative design. The
PHAOS lighting tile LED ANALOG, like the
digital version, is mounted on beams, walls
or other surfaces or simply placed in a room
– on its own or with several others in a
group formation. Depending on the colour
program, it provides light which has a calm-
ing or stimulating effect. It can also be used
as an eye-catching feature in shops and
restaurant and catering areas.
Its design and technical options always
seem to inspire creative use. Individually
devised arrangements and colour shows
produce exhibits which, in counter and
reception halls, exude spectacular flair.
The user interface ensures programs are
easy to handle in any application.
Just like their digital counterparts, PHAOS
lighting tiles LED ANALOG are highly effec-
tive tools for setting the stage for objects in
a pleasing manner. In both sales spaces
and museums, glass objects produce an
impressive succession of colours and cap-
ture the spellbound observer’s attention.
Lighting tiles can act as a “presentation
platform” or serve as decorative items in
their own right. The option to determine
the best colour mix and appropriate pace
for a sequence as required ensures a high
level of flexibility.
17P H A O S A N A L O G W E L L N E S S
Just like the digital model, PHAOS lighting tiles LED ANALOG encourage interesting
design in areas such as wellness centres and medical treatment rooms. The effect of the
light they produce can be defined so that the lighting scene obtained encourages stress
relief and relaxation. They can be used to produce a simple, changing image which distracts
and calms patients in a waiting room, they can be an integral part of colour therapy, or an
interior design feature in a fitness gym – they have a large number of possible uses.
19P H A O S A N A L O G X E N O L E D
The X-joint lends the
spotlight its distinctive,
unmistakeable character.
The PHAOS XENO LED ANALOG spotlight
is easily programmed at the rear of the
unit or can be programmed via a separate
control unit (art. no. 60 810 440).
Technical details
• This striking design in titanium grey and black is the
work of internationally famous French designer Jean-
Michel Wilmotte
• Rugged design using aluminium and die-cast metal
as well as a durable controller made of high impact
resistant polycarbonate
• Luminaires can be rotated through 365º and pivoted
through 90º; this enables them to be positioned as
flexibly as possible
• The built-in SELV safety transformer ensures safe
operation
• Light-colour sequences can be programmed on the
actual luminaire when used as a stand-alone unit or
can be programmed via an analog BUS
• Wall- and ceiling-mounting are made easy by a
wall-mounting bracket
The possibility of dynamically spotlighting millions of colour shades with pre-programmed sequences and dissolve speeds makes
the XENO LED spotlight (created by designer Jean-Michel Wilmotte) the specialist in setting dramatic lighting stages. If the
stage setting changes, often a single key press is enough to change the colour sequence. The light produced has no IR or UV
components and exhibits can therefore be lit in a manner which meets the need for careful conservation.
PHAOS XENO LEDANALOG Putting the spotlighton colour changes
Please also refer to page 38 for further product details,
installation and mounting tips and specification text.
The XENO LED spotlight’s capabilities mean that it is inevitably
used for highly effective presentations in shops, museums, art
galleries and exhibition areas. It also creates exciting, richly
varied lighting scenes in foyers, bars, restaurants and many other
prestigious areas where it achieves maximum effect when used
in restrained ambient lighting.
XENO LEDThe specialist in setting dramatic lighting scenes
21P H A O S A N A L O G P R E S E N T A T I O N
Showing off products and brands in shops, and exhibits in art
galleries and museums highly effectively with dynamic light in
variable colours – like its digital “brother”, PHAOS XENO LED
ANALOG showcases objects in the right light in an innovative,
non-damaging manner.
PHAOS lighting tube LED ANALOGVaried colours all the way along the line
Guiding, accompanying or creating a background – the PHAOS
lighting tube LED ANALOG is designed for indirect light distribution
and can handle many tasks and accomplish them creatively
thanks to a selectively variable, wide variety of colours. Sometimes
concealed in coves, sometimes deliberately installed in a prominent
position, the emphasis is always clearly on the lighting tube’s effect.
Colours bring a room to life, regardless whether they change
randomly or colour changes are coordinated along the line of
lighting tubes. Shops, bars, restaurants and wellness areas are
transformed into visually rich landscapes. The lighting tube can
be rotated through 355º to ensure maximum flexibility in terms of
distribution position. Continuous lines of light over virtually un-
limited distances can be implemented straightforwardly without
significant installation effort.
Spectacular effects can be achieved by deploying linear waves
of colours controlled by lighting management systems.
The PHAOS ANALOG control unit is needed
in order to program the PHAOS lighting tube
LED ANALOG and PHAOS LINE, and is also
the perfect device for conveniently controlling
the PHAOS lighting tile LED ANALOG and
PHAOS XENO LED ANALOG.
23
Technical details
• The PHAOS lighting tube LED ANALOG has a diameter of
40 mm and is available in lengths of 310 and 900 mm fitted
with 100 or 300 LEDs depending on design size
• Lighting tube can be rotated through 355º
• Housing made of titanium grey aluminium extrusion with
plastic end pieces, robust construction
• Controller made of high impact resistant transparent
polycarbonate to protect against impact
• Two possible installation methods: surface-mounted or
wall-mounted with flush socket and through-wiring in the wall;
both methods enable horizontal as well as vertical installation
• Lighting tube with 24 V DC supply and a separate 25 W power
supply unit meets protection class III specifications (SELV)
• Controlled/programmed via separate control unit
(art. no. 60 810 440)
Please also refer to pages 38 and 39 for further product details,
installation and mounting tips and order wording as well as to
page 43 for installation and mounting tips.
P H A O S A N A L O G L I G H T I N G T U B E
Pure fascination: dynamic indirect lighting using the PHAOSlighting tube
Schematic view of illustrated light window16 x lighting tube 60 810 427
1200
1200
1100
1100
catering areas, and in theatres
or cinemas.
Besides the creative freedom
they give to users when
programming colour changes,
the most striking differences
between these lighting tubes
and conventional tubular
lighting systems are their low
surface temperature and long
service life.
Like the digital version, PHAOS
lighting tubes LED ANALOG
can be used individually or as
a flexibly arranged continuous
row of light whose length can
be varied in 30 cm increments.
Framing, cove lighting or linear
backlighting achieve interesting
effects in shops, edging round
mirrors in beauty salons or hair-
dressers, hotels, restaurant and
PHAOS ANALOGThe latest-generation lighting tube
The dynamically coloured LED
strips of light of PHAOS LINE
LED ANALOG surface-mounted
and recessed luminaires bring
floors and walls to life. Impres-
sive effects and public attention
are guaranteed in shops, shop-
ping malls, hotels, cinemas,
museums and restaurants.
Two different lengths are availa-
ble to build continuous rows of
almost unlimited length which
can be configured as required.
Colour changes are possible
with an extremely wide variety of
compositions and sequences –
even waves of coloured light
running along the entire length
of the row – a wealth of possibi-
lities is waiting to be exploited.
Because of the materials used,
PHAOS LINE is a high-quality,
durable product: V4A special
steel, die-cast or extruded alu-
minium sections, and frosted
safety glass.
PHAOS LINE LED ANALOG surface-mounted luminaire
PHAOS LINE LED ANALOG recessedluminaire
PHAOS LINE LED ANALOGDynamically coloured strips of light
PHAOS LINE LED ANALOG will be available in November 2002.
27P H A O S A N A L O G L I N E L E D
Because it can be flexibly sur-
face-mounted, PHAOS LINE can
be used to illuminate facades in
an uplight or downlight position.
It is equally suitable for use as
a continuous row system in out-
door areas or in damp locations.
The adjustable wall support
enables unevenness to be com-
pensated.
It can also be used to alter the
distribution of light. A straight-
line design and compact size
also ensure that it blends unob-
trusively into the overall archi-
tectural scheme.
PHAOS LINE LED ANALOG recessed luminaires
Ideal application areas for PHAOS LINE recessed luminaires
include prestigious circulation areas where they do an impressive
job of directing and guiding when embedded in the floor. By
producing uniformly illuminated surfaces, they make an equally
strong impression as decorative effective lighting in counters,
furniture or shop interiors. When used to light staircase steps,
they even make a valuable contribution towards safety.
Technical details
• PHAOS LINE LED ANALOG recessed luminaires are available
in lengths of 380 and 1,000 mm. They can be combined into
continuous rows of practically infinite length without any
significant installation effort.
• Rugged housing made of extruded aluminium section, end
pieces are made of die-cast aluminium, the entire luminaire is
powder-coated in titanium grey. Equally rugged: frosted 10 mm
safety glass. The design is completed by a cover frame made
of V4A special steel.
• The number of LEDs in the luminaire depends on its length:
380 mm size has 100 LEDs, 1,000 mm size has 300 LEDs.
• A special casting box enables installation in cavity walls
(minimum recessed depth 85 mm) and in concrete/brickwork.
• Two PG 13.5 cable glands for through-wiring.
• Luminaires meet the following specifications: IP 67, protection
class II, load-bearing capacity up to 500 kg.
• Controlled via a separate analog control unit
(art. no. 60 810 440).
PHAOS LINE LED ANALOGRecessed and surface-mounted luminaires
PHAOS LINE LED ANALOG surface-mounted luminai-
res
Large façades and walls of the kind encountered in airports, trade
fair and sales halls, sports stadiums and department stores can be
given an individual touch by colour shows provided by PHAOS
LINE surface-mounted luminaires. They are equally at home in
situations where coves and roof structures of architecturally sophi-
sticated buildings need to be emphasised. Their ability to with-
stand moisture makes this continuous row system a safe and
almost maintenance-free solution. Their optic designed for indirect
lighting ensures that the desired surfaces are brightly illuminated.
Technical details
• PHAOS LINE modules are available in lengths of 360 and
980 mm. They can be installed either horizontally or vertically in
order to build continuous row systems without any significant
installation effort.
• The luminaire is extremely compact (dimensions: 80 x 80 mm).
• Robust design consisting of extruded aluminium section with end
pieces made of die-cast aluminium, powder-coated in titanium
grey, and high impact resistant controller made of polycarbonate.
• The number of LEDs depends on the length of the luminaire:
360 mm size has 100 LEDs, 980 mm size has 300 LEDs.
• An adjustable (± 20º) graduated mounting base ensures easy
installation.
• PHAOS LINE LED ANALOG meets specifications of the following
standards: IP 65 and protection class II, and is also impact
resistant (6 joules).
• Controlled via a separate control unit (art. no. 60 810 440).
Please also refer to page 39 for further product details and order
wording.
PHAOS LINE products are also available for use with a T5
compact fluorescent lamp 8 W (compact version), 21 and 39 W.
29P H A O S A N A L O G P A S S A G E
Dynamic lighting in variable colours, can be walked on,
protected against moisture, as lighting accent or continuous
row system – PHAOS LINE.
PHAOS ANALOG programming
• Products are generally supplied with a default program
• Up to 10 colours can be mixed and stored
• Program steps are detected by monitoring LEDs in various modes
• Time setting for individual colours
• Definable dissolve/fading times
• Special setting for white colour
• Program is stored in EEPROM in the event of power failure
• Easy-to-define “master” controls the “slaves” (all slaves operate identically)
• Master can be selected on the product itself or by using a separate analog
control unit in the case of PHAOS lighting tile and PHAOS XENO LED
• Separate control unit must be used for PHAOS lighting tube and PHAOS LINE
Master and slave principleControlled synchronised sequences
PHAOS lighting tile LED ANALOG
230 V AC max. 1 master, 9 slaves
Power supplyunit 25 W
Bus line 60 800 117
Power supplyunit 25 W
Power supplyunit 25 W
Power supplyunit 25 W
PHAOS ALED LKmaster
PHAOS ALED LK
PHAOS ALED LK
PHAOS ALED LK
230 V AC
1 master (separate analog control unit)9 slaves
Bus line 60 800 117
Power supplyunit 25 W
Power supplyunit 25 W
Power supplyunit 25 W
PHAOS ACTRL
60 810 440
PHAOS ALED LK
PHAOS ALED LK
PHAOS ALED LK
PHAOS lighting tile LED ANALOGwith separate analog control unit
PHAOS lighting tile LED ANALOG
230 V AC
Use signal amplifierif more than 10 PHAOSLED luminaires (lightingtiles, lighting tube, PHAOSLINE) are networked overanalog bus
Bus line 60 800 117
Power supplyunit 25 W
Power supplyunit 25 W
PHAOS ALED LK
No. 10 resp.No. 20 resp.No. 30 etc.
Signal amplifier60 810 441
PHAOS ALED LK
No. 11 resp.No. 21 resp.No. 31 etc.
PHAOS lighting tube LED ANALOG 310 mm
230 V AC Bus line 60 800 117
Power supplyunit 25 W
Power supplyunit 25 W
PHAOS ACTRL
60 810 440
PHAOS ALED lighting
tube 310 mm
PHAOS ALED lighting
tube 310 mm
PHAOS ALED lighting
tube 310 mm
PHAOS ALED lighting
tube 310 mm
1 master (separate analog control unit 60 810 440 must be used); up to 9 slaves (310or 900 mm lighting tube); 1 power supply unit drives up to two 310 mm lighting tubes
31P H A O S A N A L O G C O N F I G U R A T I O N S
PHAOS ANALOG BUS
• Up to 10 luminaires per group; one luminaire acts as the master
• Separate control is possible using PHAOS A CTRL (art. no. 60 810 440).
Analog control unit performs master function, connected luminaires operate
in slave mode
• Up to 10 networked systems can be mixed. Prerequisite: all systems are part
of the PHAOS ANALOG product family. Luminaires groups comprising more
than 10 luminaires require signal amplifier (art. no. 60 810 441)
• 24 V control voltage for control unit (art. no. 60 810 440) and for signal
amplifier is tapped from the nearest PHAOS ANALOG luminaire installed;
for PHAOS XENO LED ANALOG, a compact DC power supply unit
(e.g. art. no. S7 003 150) provides the 24 V
• PHAOS lighting tube LED ANALOG and PHAOS LINE LED ANALOG are
programmed and switched using the PHAOS A CTRL analog control unit
(art. no. 60 810 440)
• Bus wiring between PHAOS ANALOG luminaires uses an 8-core telephone
cable with RJ45 telephone socket/connector
PHAOS A XENO without separate control unit
230 V AC 1 master, 9 slaves
PHAOS AXENO
master
Bus line 60 800 117
PHAOS AXENO
PHAOS AXENO
PHAOS AXENO
Power supplyunit 8 W
230 V AC 1 master, 9 slaves
PHAOS A CTRL60 810 440
PHAOS AXENO
PHAOS AXENO
PHAOS AXENO
PHAOS A XENO with separate control unit
PHAOS lighting tube LED ANALOG 900 mm
230 V AC
1 master (separate analog control unit 60 810 440 must be used),up to 9 slaves (310 or 900 mm lighting tube)
Bus line 60 800 117
Power supplyunit 25 W
Power supplyunit 25 W
Power supplyunit 25 W
PHAOS ACTRL
60 810 440
PHAOS ALED lighting
tube 900 mm
PHAOS ALED lighting
tube 900 mm
PHAOS ALED lighting
tube 900 mm
Power supplyunit 25 W
PHAOS ANALOG, mixed group
230 V AC
Typical mixed group consisting of 1 master (separate analog control unit) and 9 slaves(in this case, the first LED lighting tile could also function as a master)
Bus line 60 800 117
Power supplyunit 25 W
Power supplyunit 25 W
Power supplyunit 25 W
Power supplyunit 25 W
PHAOS ACTRL
60 810 440
PHAOS ALED LK
PHAOS ALED LK
PHAOS ALED LK
PHAOS ALED lighting
tube 900 mm
PHAOS ALED lighting
tube 310 mm
PHAOS ALED lighting
tube 310 mm
PHAOS AXENO
PHAOS AXENO
PHAOS AXENO
PHAOS ANALOG
230 V AC
Use signal amplifier if morethan 10 PHAOS A XENO LEDspotlights are networked overanalog bus. In this case, aseparate power supply unit(e.g. S7 003 150) is neededin order to provide the 24 Vbus supply voltage
Bus line 60 800 117
Power supplyunit 8 W
Signal amplifier60 810 441
PHAOS AXENO LED
No. 10 resp.No. 20 resp.No. 30 etc.
PHAOS AXENO LED
No. 11 resp.No. 21 resp.No. 31 etc.
• Products are generally supplied with a default program
• Up to 14 colours can be mixed and stored
(stand-alone mode)
• Almost unlimited programming options via digital bus
• Program steps are detected via display
• Time setting for individual colours from 3 s to 3 hrs
• Defined dissolve/fading times for dynamic light
(fast, medium, slow)
• Program is stored in the event of a power failure
• Stand-alone function in the case of PHAOS lighting tile
and PHAOS XENO LED
• Generally decentralised programming for PHAOS
lighting tube
• Various decentralised programming options using
LUXMATE® components
Please also refer to pages 40 to 42 for further
product details and order wording, and to page 43
for installation and mounting tips.
PHAOS DIGITALHigh-end dynamic lighting in variable colours
33P H A O S D I G I T A L B U S - C O N T R O L L E D
Stand-Alone
Easy-to-program PHAOS lighting tile LED DIGITAL
and PHAOS XENO LED DIGITAL spotlight. The desired
program steps are clearly visible on the rear display.
PHAOS DIGITAL
The digital bus enables control individual luminaires
separately and independently.
• All PHAOS DIGITAL luminaires can be configured
as a group
• No limit using a 2-wire digital bus
PHAOS XENO LED DIGITAL PHAOS lighting tile LED DIGITAL
PHAOS lighting tube LED DIGITAL
Please contact your nearest Zumtobel Staff representative if you have any queries regarding programming. We
will be glad to advise you on the extensive design options available using PHAOS DIGITAL.
Touch panel for control and
programming of several PHAOS
DIGITAL luminaire groups. It is
possible to retrieve and display
the settings of up to 20 lighting
scenarios for 30 groups of
luminaires.
Selectively creating lighting scenes by controlled changes in the colour,
intensity and direction of light – PHAOS DIGITAL opens up an entirely
new world of design possibilities.
Project-specific solutions available on request
LUXMATE engineer uses a
PC to carry out programming
PC interface
LM-BV (bus power supply,
max. 100 bus devices)
LM-ZSQ (sequencer)
Active Light perfectionCreative freedom thanks to separatecontrol of individual bus devices
35P H A O S D I G I T A L C O N F I G U R A T I O N S
PHAOS DIGITAL, mixed group
230 V AC LUXMATE 2-wire BUS
Power supplyunit 25 W
Power supplyunit 25 W
Power supplyunit 25 W
PHAOS DLED LK
PHAOS DLED LK
PHAOS DLED LK
PHAOS DLED lighting
tube 310 mm
PHAOS DLED lighting
tube 310 mm
PHAOS DXENO
PHAOS DXENO
Power supplyunit 25 W
30 or 95 PHAOS luminaires can
be connected depending on the
bus power supply used.
PHAOS XENO LED DIGITAL
230 V AC
PHAOS DXENO
LUXMATE 2-wire BUS
PHAOS DXENO
PHAOS DXENO
PHAOS DXENO
PHAOS lighting tile LED DIGITAL
230 V AC LUXMATE 2-wire BUS
Power supplyunit 25 W
Power supplyunit 25 W
Power supplyunit 25 W
PHAOS DLED LK
PHAOS DLED LK
PHAOS DLED LK
PHAOS lighting tube LED DIGITAL 310 mm
230 V AC LUXMATE 2-wire BUS
Power supplyunit 25 W
Power supplyunit 25 W
PHAOS DLED lighting
tube 310 mm
PHAOS DLED lighting
tube 310 mm
PHAOS DLED lighting
tube 310 mm
PHAOS DLED lighting
tube 310 mm
LEDOS RGB recessed floor and wall luminaires
LEDOS RGB round c Cat. no. kg Order no.
Luminaire housingBEH D120 H Deep version, can be driven over* 0,8 S7 710 660
Board unitPLR 230V RGB S7 711 050* Screw-fastened cover.
LEDOS RGB square c Cat. no. kg Order no.
Luminaire housingBEH Q120 H Deep version, can be driven over* 0,6 S7 710 670
Board unitPLR 230V RGB S7 711 050* Screw-fastened cover.
Recessed floor and wall luminaire• With screws in stainless-steel ring for cavity-wall/plaster fixing or floor mounting
as drive-over version• Housing made of die-cast aluminium, titanium powder-coated• Cover ring made of special steel• Frosted cover glass• Load carrying capacity up to 1000 kg/20 km/h• Board unit must be ordered separately• Can be installed in cavity or concrete wall• Kit for cavity installation included in scope of supply• IP 67 for installation in floor• Protection class I• Installed load: approx. 2.0 W
LEDOS concrete casting surround, round Cat. no. kg Order no.
AccessoriesFloor concrete casting surround D111 (deep design) for S7710660 0,1 S7 710 640
Concrete casting surround• Casting surround made of polypropylene• For installation of LEDOS RGB round (S7 710 660) in concrete or masonry
115
111
S7 710 640
LEDOS concrete casting surround, square Cat. no. kg Order no.
AccessoriesFloor concrete casting surround Q111 (deep design) for S7710670 0,1 S7 710 650
Concrete casting surround• Casting surround made of polypropylene• For installation of LEDOS RGB square (S7 710 670) in concrete or masonry
115
111x111
S7 710 650
113
2 120
Ø 110
Recessed floor and wall luminaire• With screws in stainless-steel ring for cavity-wall/plaster fixing or floor mounting
as drive-over version• Housing made of die-cast aluminium, titanium powder-coated• Cover ring made of special steel• Frosted cover glass• Load carrying capacity up to 1000 kg/20 km/h• Board unit must be ordered separately• Can be installed in cavity or concrete wall• Kit for cavity installation included in scope of supply• IP 67 for installation in floor• Protection class I• Installed load: approx. 2.0 W
113
2 120x120
110 x 110
To specify e.g.: LEDOS RGB round BEH D120 H Deep version S7 710 660
37L E D O S R G B I N S T A L L A T I O N
Installation in the floor
Installation in a veriety of different floor
types: concrete, tiles, carpet, wood.
When installing LEDOS RGB in floors, we
recommend star-shaped circuits.
Truly water resistant for exterior
installation
• At least 30 cm of gravel under the reces-
sing box for good drainage
• Use flexible rubber sheathed cable, suita-
ble for damp areas
• Tightly close PG gland
• Secure opposite screws of luminaire
frame
Secure installation
Secure installation in carity walls (wood,
plaster) with swivel brackets
Installation in ceilings and walls
(concrete/brick)
Vertical adjustment of recessed box in the
wall to define the position of the luminaire
housing.
LEDOS RGB Floor recessed (interior)
LEDOS RGB Ground recessed (ex-terior)
Wall thicknesses and recessed depthof 2–30 mm
Installation/wiring for wall-mounting
Level installation
Secure installation in carity walls
115 mm
2–30 mm
PHAOS ANALOG
PHAOS LED ANALOG lighting tile xc Cat. no. kg Order no.
Lighting tilePHAOS A LED-LK 2,1 60 810 426
PHAOS Wall-mounted frame titanium 0,3 60 800 070
AccessoriesElectronic transformer ETR 230V-AC/24V-DC/25 W 0,15 S7 003 230
5 m bus line with RJ 45 coupling 0,2 60 800 117
LED luminaire (ANALOG) with variable colours• Homogeneous light distribution• Individually programmable and bus-compatible• Protective low voltage: 24 V-DC• Wattage: max. 16 W• Surface mounting• Variable installation position• Wall and group mounting with mounting frame, titanium colour• High impact resistant polycarbonate diffuser• Low surface temperature• Protection class III• Electronic transformer S7 003 230 must be ordered separately
228 x 22831
PHAOS LED ANALOG lighting tube xc Cat. no. kg Order no.
Lighting tube for surface-mountingPHAOS A LED-LR 310 AN 0,7 60 810 427
PHAOS A LED-LR 900 AN 60 810 429
Lighting tube for flush-mountingPHAOS A LED-LR 310 UP 0,7 60 810 428
PHAOS A LED-LR 900 UP 60 810 430
AccessoriesElectronic transformer ETR 230V-AC/24V-DC/25 W 0,15 S7 003 230
5 m bus line with RJ 45 coupling 0,2 60 800 117
For cavity-wall or flush mounting, please order UP55 flush sockets separately at your specia-list electrical supplier.
LED luminaire (ANALOG) with variable colours• Homogeneous light distribution• Direct and indirect lighting effects thanks to flexible fastening• Bus-compatible• Protective low voltage: 24 V-DC• Wattage: max. of 12 W (310 mm) or max. of 36 W (900 mm)• Housing made of anodised aluminium• High impact resistant polycarbonate diffuser• Length: 310 mm resp. 900 mm• Variable installation position• Surface or flush mounting• Low surface temperature• Protection class III• Electronic transformer S7 003 230 must be ordered separately
310/
900
23
355
150
40
2222
8282
PHAOS XENO LED ANALOG c Cat. no. kg Order no.
Spotlight for surface mountingPHAOS A XENO LED AN 1,9 60 810 431
5 m bus line with RJ 45 coupling 0,2 60 800 117
LED spotlight (ANALOG) with variable colours• For floodlighting• Individually programmable and bus-compatible• Wattage: max. of 22 W• Rotates through 365°• Housing made of die-cast aluminium• Colour: titanium• High impact resistant polycarbonate diffuser• Universal joint, pivots through 90°• Can be installed on ceiling and on wall• Low surface temperature
299
282
Ø 12
5
To specify e.g.: PHAOS LED ANALOG lighting tile PHAOS A LED-LK 60 810 426
39L E D M U L T I C O L O U R L U M I N A I R E S
P H A O S A N A L O G
PHAOS LINE E LED ANALOG c Cat. no. Order no.
Surface-mounted luminairePHAOS-L A A360 60 810 434
PHAOS-L A A965 60 810 435
Recessed luminairePHAOS-L A E360 60 810 432
PHAOS-L A E965 60 810 433
PHAOS LINE concrete casting box Cat. no. Order no.
AccessoriesConcrete floor casting surround L = 380 mm* 60 810 436
Concrete floor casting surround L = 1,000 mm* 60 810 437
Concrete casting surround• Material: special steel• With cover for sealing casting surround during concrete work
120
85
ca.380/1000*
PHAOS transformer w Cat. no. kg Order no.
TransformerElectronic transformer ETR 230V-AC/24V-DC/25 W 0,2 S7 003 230
Transformer• Electronic transformer for LED modules• High light output ratio• Short-circuit breaking with automatic restart• Overload protection with power feedback control• Electrical connections: primary side: 2-pole plug-in terminal strip; secondary
side: 2x2-pole plug-in terminal strip• Only for use in typical interior applications
34
120
72
S7 003 230
PHAOS control unit, ANALOG Cat. no. kg Order no.
Accessories5 m bus line with RJ 45 coupling 0,1 60 800 117
Analog control unit 0,1 60 810 440
Signal amplifier* 0,1 60 810 441
Control unit (ANALOG)• For programming and control of PHAOS ANALOG luminaires• Required for PHAOS lighting tube LED ANALOG and PHAOS LINE LED ANALOG• Optionally PHAOS XENO LED ANALOG and PHAOS lighting tile LED ANALOG• Voltage supply: 24 V-DC• Bus connection via 8-pole bus line with RJ 45 coupling• Can be installed in double UP55 flush socket• Upright installation position• Only for use in typical interior applications
160
80
* Signal amplifier needed if more than 10 PHAOS ANALOG products per group.
Available Nov. 2002
* For exact dimensions, please contact your Zumtobel Staff representative.
LED surface mounted luminaire (ANALOG) with variable colours• Technical lighting features designed
for indirect lighting• With wall-mounted fitting, pivots
through ± 20°• Horizontal or vertical installation
• Cover frame made of V4A specialsteel
• Frosted safety glass• Maximum load: 500 kg• Wattage: max. of 12 W (360 mm) /
max. of 36 W (965 mm)• Protection type IP 67• Protection class II• Two PG13.5 cable glands (for looping)• Controlled via 60 810 440 analog
control unit (please order separately)
• Housing: aluminium extrusion/die-cast aluminium
• Colour: titanium• High impact resistant polycarbonate
diffuser• Wattage: max. of 12 W (360 mm)/
max. of 36 W (965 mm)
• Protection type IP65• Protection class II• Two PG13.5 cable glands (for looping)• Controlled via 60 810 440 analog
control unit (please order separately)
LED recessed floor/wall luminaire(ANALOG) with variable colours• Homogeneous light distribution• Housing: aluminium extrusion/die-
cast aluminium• Colour: titanium
PHAOS LED DIGITAL lighting tile Cat. no. kg Order no.
Lighting tilePHAOS D LED-LK 2,1 60 810 296
PHAOS Wall-mounted frame titanium 0,3 60 800 070
AccessoriesElectronic transformer ETR 230V-AC/24V-DC/25 W 0,15 S7 003 230
228 x 22831
PHAOS LED DIGITAL lighting tube Cat. no. kg Order no.
Lighting tube for surface-mountingPHAOS D LED-LR 310 AN 0,7 60 810 297
Lighting tube for flush-mountingPHAOS D LED-LR 310 UP 0,7 60 810 298
AccessoriesElectronic transformer ETR 230V-AC/24V-DC/25 W 0,15 S7 003 230
For cavity-wall or flush mounting, please order UP55 flush sockets separately at your specia-list electrical supplier.
310
23
355
150
40
2222
8282
PHAOS XENO LED DIGITAL Cat. no. kg Order no.
Spotlight for surface mountingPHAOS D XENO LED AN 1,9 60 710 028
299
282
Ø 12
5
PHAOS transformer Cat. no. kg Order no.
TransformerElectronic transformer ETR 230V-AC/24V-DC/25 W 0,2 S7 003 230
Transformator• Electronic transformer for LED modules• High light output ratio• Short-circuit breaking with automatic restart• Overload protection with power feedback control• Electrical connections: primary side: 2-pole plug-in terminal strip; secondary
side: 2x 2-pole plug-in terminal strip• Only for use in typical interior applications
PHAOS DIGITAL
c
c
c
w
LED luminaire (DIGITAL) with variablecolours• Homogeneous light distribution• Individually programmable and bus-
compatible• Protective low voltage: 24 V-DC• Wattage: max. 16 W• Surface mounting• Variable installation position
• Wall and group mounting with moun-ting frame, titanium colour
• High impact resistant polycarbonatediffuser
• Low surface temperature• Protection class III• Electronic transformer S7 003 230
must be ordered separately
LED luminaire (DIGITAL) with variablecolours• Homogeneous light distribution• Direct and indirect lighting effects
thanks to flexible fastening• Bus-compatible• Protective low voltage: 24 V-DC• Wattage: max. 9 W• Housing made of anodised aluminium
• High impact resistant polycarbonatediffuser
• Length: 310 mm• Variable installation position• Surface or flush mounting• Low surface temperature• Protection class III• Electronic transformer S7 003 230
must be ordered separately
LED spotlight (DIGITAL) with variable colours• For floodlighting• Individually programmable and bus-compatible• Wattage: max. 16 W• Rotates through 365°• Housing made of die-cast aluminium• Colour: titanium• High impact resistant polycarbonate diffuser• Universal joint, pivots through 90°• Can be installed on ceiling and on wall• Low surface temperature
To specify e.g.: PHAOS LED DIGITAL lighting tile PHAOS D LED-LK 60 810 296
34
120
72
41L E D M U L T I C O L O U R L U M I N A I R E S
L U X M A T E P R O F E S S I O N A L
Time-automation dynamism Cat. no. Order no.
LM-ZSQ 20 975 720
• For dynamic lighting sequences and for time-based control of LUXMATE system• For all dynamic sequences, without PC programming• Automatic change of lighting scenes• Adjustable dissolve speeds• Automatic switch-on/off times• Installation: on 35 mm rail
90 35
70 59
Control and programming touch panel Cat. no. Order no.
LM-CPA Colour display 22 146 153
LM-MPA Monochrome display 22 146 166
• Touch panel for programming and control of the LUXMATE system in individualrooms
• ON/OFF• 20 lighting scenes can be called up• Further control of the lighting, blinds, air conditioning services etc.• Optional: Additional momentary-action switches for ON/OFF and scenes
120 45
4
20015
690 13
5
Bus supply room/switch cabinet Cat. no. Order no.
LM-BVS35 22 115 026
• Zur Spannungsversorgung eines Busbezirks mit maximal 30 PHAOS DIGITAL Produkten
• Montage: auf 35-mm-Hutschiene
90 35
35 59
Alternatively Order no. 20 975 247 LM-BV EO2 for 100 Bus components (95 PHAOS)
163
Ø229
229
95
20
Cable outlet
Drilled holes for screws≤ Ø 4 for wall plugs
A A
71
Lighting tile – wall-mounting
The PHAOS lighting tile LED ANALOG or DIGITAL can
be easily wall-mounted using the wall mounting frame
(art. no. 60 800 070).
Installing a lighting tube using wall
mounting bracket
Allow for distance to power outlet when installing the
wall mounting bracket.
Direct installation without a wall
mounting bracket
Dimensions for flush and cavity-wall sockets for fixing
LED lighting tube: 310 mm (A = 239 mm) and 900 mm
(A = 829 mm).
146
60
Notes on installation
355°
43P H A O S A N A L O G + D I G I T A L I N S T A L L A T I O N
PHAOS ANALOG control unit
(art. no. 60 810 440)
Installed using double UP 55 flush socket
in brickwork or cavity walls
• Control voltage 24 V DC, 2-wire
• RJ 45 socket for 8-core control line
• IP 20 when installed indoors
• Upright mounting position
PHAOS ANALOG
No-tool bus connection with 8-core
telephone cable and RJ 45 connector
PHAOS DIGITAL
2-wire bus line
Throughout the world, Zumtobel Staff
is the competent reliable partner for
innovative lighting solutions in all areas
of application of professional interior
lighting:
Industry and Engineering
Sport and Leisure
Transit areas and Car parks
Offices and Education
Presentation and Retail
Hotels and Catering
Art and Culture
Health & Care
Orientation and Safety
Active Light
With production plants in Austria,
Germany, Australia and the USA, and
sales organisations in all major Euro-
pean markets as well as commercial
agencies in most regions of the world,
Zumtobel Staff is one of the biggest
international enterprises in the lighting
sector.
As a leader in innovation, we guarantee
our customers global competence in
lighting consulting and design assist-
ance, superior product quality and
future-proof technologies – from indivi-
dual luminaires to electronic lighting
management systems.
Corporate goal: We want to use light
to create worlds of experience, make
work easier and improve communica-
tions and safety while remaining fully
aware of our responsibility to the envi-
ronment.
P R E S E N T A T I O NA N D R E T A I L
A R T A N D C U L T U R E
H O T E L S A N D C A T E R I N G
S P O R T A N D L E I S U R E
H E A L T H & C A R E
T R A N S I T A R E A SA N D C A R P A R K S
O F F I C E S A N D E D U C A T I O N
I N D U S T R Y A N D E N G I N E E R I N G
Art.-No. 04 797 310-UK 10/02 © Zumtobel StaffTechnical data was correct at time of going to press. We reserve the right to make technical changes without notice. Please contact your local sales office for further information. Printed on environmentally-friendly chlorine-free paper. Printed on Luxosamt Offset.
United Kingdom
Zumtobel Staff Lighting Ltd.
Unit 4 - The Argent Centre,
Pump Lane
Hayes/Middlesex UB3 3BL
Tel. +44/(0)20 8589 1800
Fax +44/(0)20 8756 4800
USA/Canada/Mexico
Zumtobel Staff Lighting
3300 Route 9W
Highland, New York 12528
Tel. +1/(0)845/691 62 62
Fax +1/(0)845/691 62 89
http://www.zumtobelstaffusa.com
Australia
Zumtobel Staff (Australia) Pty. Ltd.
2 Wella Way
2250 AUS-Somersby, NSW
Tel. +612/(0)43/402 140
Fax +612/(0)43/402 108
Head offices
Zumtobel Staff GmbH
Schweizer Strasse 30
Postfach 72
A-6851 Dornbirn, AUSTRIA
Tel. +43/(0)5572/390-0
Fax +43/(0)5572/22 826
Zumtobel Staff GmbH & Co. KG
Grevenmarschstr. 74-78
D-32657 Lemgo, GERMANY
Tel. +49/(0)5261/2 12-0
Fax +49/(0)5261/2 12-9000
International Freephone/fax numbers:
Tel. 00800 THE LIGHT
or 00800 843 54448
Fax 00800 0843 5444
E-Mail: [email protected]
http://www.zumtobelstaff.com
Track and spots
Lighting systems
Downlights/uplights
Recessed luminaires
Surface-mounted and pendant luminaires
Wallwashers
Uplights, wall lights and task lights
Batten luminaires and continuous row luminaires
High-bay reflector luminaires
Luminaires of higher protection
Lighting management
Emergency lighting
Hospital trunking