Replacement Cover New Design
Acceleration __________ Speed __________
Requested Material: _____________________
Environmental Conditions/Protection
Linear Motion Bellows
REQUEST FOR QUOTE
Horizontal
Orientation:
Mounting Options
End 1:
Phone: 704-986-2455 Fax: 704-986-2456 Email: [email protected] Website: www.nabell.com
Customer Information
Company ___________________________________
Address ____________________________________
City __________________Contact _____________________________________
State ___ Zip __________
Phone ___________________ Fax _______________
Email ______________________________________
Bellows/Cover Construction:
Application Information
Project Information
Project/Reference ________________________
Application _______________________________________________
Qty Required ______
Nabell Design
Cycles/day _____
If unit of measure is not shown, please specify
Nabell Recommendation Sewn/FoldedSewnHeat-Sealed Folded
Please supply a sketch/drawing/CAD File/model (.dwg, .dxf, .stp, .sldprt) or photos
REACH: _________________ RoHS: __________________ COC: __________________ FAIR: __________________ CONFLICT Minerals: _________________________________ Special Req: _______________________________________
Chemicals/Coolant specify type, % concentration, MSDS__________________________________________
Mist Heavy Spray Flooded SubmergedExposure:
End 2:
Will bellows be supported during operation? C-Channel Z-Channel No support
Nabell Recomended
Misc Information
Food Grade/FDA
Laser ________________
Water Jet
Plasma Cutter
Outdoors
Medical
Other specify ____________
_____________________
FlangeHook and Loop (velcro)
No Flange requiredOther _____________________________
Holes required (specify/provide drawing) _______________________ No Holes required
Cuff Attachment Dimensions ______________
FlangeHook and Loop (velcro)
No Flange requiredOther _____________________________
Holes required (specify/provide drawing) _______________________ No Holes required
Cuff Attachment Dimensions ______________
(Nabell recommends providing a method of capture to control any deviation from the intended travel path)Cable/Rod Other ______________
Chips/Particles specify type, size & temp at bellows ____________________________________ °C°F
Pressures internal _______ external _______ difference _______
Clean Room class ______ ISO FED Electrostatic (specify) ____________________________
Water/Moisture specify type __________________________________________________________
Safety/Dust Cover specify __________________________________________________________
Weld Spatter/Sparks (Distance from bellows) _______________________________________________
Ambient Temp Range _____ to _____ Intermittant Temp Range _____ to _____ °F °C
Standards/Requirements
Vertical Crossrail
Linear Motion Bellows
REQUEST FOR QUOTE
Phone: 704-986-2455 Fax: 704-986-2456 Email: [email protected] Website: www.nabell.com
Please Select style
1 2 3
4 5 6
7 8
(Nabell recommends providing a method of capture to control any deviation from the intended travel path)
Min
Stroke
A
C
D
X (Dual/Parallel rails)
Dimensions (Please provide drawing or model (.dwg, .dxf, .stp, .sldprt)
F
E
G
H
I
Please specify unit of measure
MMMax INCH
1 Rail
Rail Manufacturer:
Rail Model:
B 2 Rails Ball ScrewX
