Fiberglass Buckets and GuardsLiners, Covers and Accessories
8301 Clinton Park Dr • Fort Wayne, IN 46825 • 260-484-3139 • Fax: 260-483-2532
BucketTruckParts.com • [email protected]
PCC Guards Catalog Last Revised: 9/2018 Please scroll down to find our Replacement Guards Catalog. We have been building fiberglass parts by hand for over 60 years and have many molds for parts that are no longer listed. If you do not see your guard, please call or email! Disclaimer: Plastic Composites Co (PCC) manufactures aftermarket replacement fiberglass parts, buckets, and guards for the Aerial Manlift (Bucket Truck) Industry. All brands listed below are trademarks of their respective owners and are only used for reference purposes. Our products are engineered and manufactured to meet or exceed all applicable OSHA and/or ANSI standards. Plastic Composites Co is not sponsored by or affiliated with any of the companies listed below. These manufacturers do not manufacture, sell, or distribute the goods advertised herein, and PCC makes no claim that the replacement fiberglass buckets manufactured for these companies’ vehicles comply with the OEM’s manufacturing standards.
• Altec, Aerial Lift of CT, Holan, Lift-All, MTI, Pitman, Reach All, TECO, and Telsta Electric Lift are registered trademarks of Altec, Inc.
• Asplundh is a registered trademark of Asplundh Tree Expert Company • Dur-A-Lift is a registered trademark of Diversified Technologies Inc. • ETI and Hidro-Grubert are registered trademarks of Palfinger • National Crane is a registered trademark of The Manitowoc Company • Posi-Plus is a registered trademark of Posi-Plus • Terex, Hi-Ranger, Telelect, Texoma are registered trademarks of Terex Corporation • Versalift is a registered trademark of Time Manufacturing Company
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S ˙All parts are PCC manufactured replacements for specified brands.
1 • Section 2 Jan 2017
PCC Part # Description
41511000 Control Cover Altec 30” x 14” x 10” - Altec P/N 870230785 or 021-1121-01 (1 ring)
41511200 Control Cover 32-1/2” x 18-1/2” x 12-1/2” - Altec P/N 026-1183-02 (2 ring)
41530350 Left Hose Guide 1-1/2” P/N 871004515
41531100 Hose Cover (solid at bottom) Altec P/N 871003624±
PCC Replacement Guards that fit Altec LRIII (continued on next page)
insideside
insideside
side front inside
side top inside
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
Call for additional bucket configurations.
Jan 2017 Section 2 • 2
PCC Part # Description
41531300 Hose Shield Bucket End Altec P/N 025-0353-01 - Also LRV 871001359
41531400 Outer pivot end hose shieldAltec P/N 025-353-02 or 871001360w
PCC Replacement Guards that fit Altec LRIII (continued on next page)
insidefront side
side inside inside
41551100 Platform Mounting Shaft Cover Bottom Altec P/N 026-1206-01 or 871003596
41551000 Platform Mounting Shaft Cover Top (Same as 41563030) Altec P/N 870261317 or 070103030
top side bottom inside
top side bottom inside
3 • Section 2 Jan 2017Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
PCC Replacement Guards that fit Altec LRIII (continued on next page)
PCC Part # Description
41551170 Bucket end, End Plate 8-3/4” diameter
41551200 Bucket end, End Plate 9-3/4” diameter- Altec P/N 025-0352-01
41551300 Outer Pivot end, End plate 10-3/4” diameter- Altec P/N 025-0328-21
41551500 Lower Boom Leveling Cover Lower Section O/S 81-3/4” x 14-1/2” x 4-5/8” - Altec P/N 023-0885-23
41551600 Lower Boom Leveling Cover Upper Section (has hump) O/S 82-1/4” x 15” x 4-5/8” - Altec P/N 023-466-23 or 870230466 - Also on LRV 871001359
41551700 Lower Boom Leveling Cover Center Section 64” long Altec P/N 023-0574-03
41551800 Lower Boom Leveling Cover Center Section 39” long Altec P/N 023-0574-05
41551900 Set Lower Boom Leveling Covers 41551500, 41551600, 41551700, 41551800
top
front top
top
inside
front
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S
Jan 2017 Section 2 • 4
PCC Replacement Guards that fit Altec LRIII and LRIV Series
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
5 • Section 2 Jan 2017
PCC Part # Description
42051996 Circular Boom Cover - 96”
PCC Part # Description
41560410 Hose Cover Lower Boom Elbow Altec P/N 7044410 or 070600410
41561012 Upper boom end cover 9-7/8” - Altec P/N 070101012
41561418 Platform shaft weldment cover - large half - bottom Altec P/N for set 870261418 (PCC sells separately with 41561419)
41561419 Platform shaft weldment cover - small half - top Altec P/N for set 870261418 (PCC sells separately with 41561418)
41561011 Upper boom cover Altec P/N 070101011
42052100 Tape for plastic boom covers - 3” x 108’
PCC Replacement Guards that fit Altec LRIII
PCC Replacement Guards that fit Altec LRV (continued on next page)
41561418 with 41561419
front
front
41561418 front 41561419 side
outside
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S All parts are PCC manufactured replacements for specified brands.
Jan 2017 Section 2 • 6
41564002 Platform Cover Right Side (AEGIS) - 2007 and earlier Altec P/N 7044002 or 070114002
41564003 Platform Cover Left Side (AEGIS) - 2007 and earlier Altec P/N 7044003 or 070114003
41564000 Boom Tip Cover Top (AEGIS) Altec P/N 7044000 or 070114000
41564001 Boom Tip Cover Bottom (AEGIS) Altec P/N 7044001 or 070114001
PCC Part # Description
41563012 Boom Tip Hose Cover (Large) 41563013 Boom Tip Hose Cover (Small)
41563030 Platform cover top (same as 41551000) Altec P/N for set 0706103030
41563031 Platform cover bottom (same as 41551000 without cutouts on bottom) Altec P/N for set 0706103030
PCC Replacement Guards that fit Altec LRV
41564003 side41564003 bottom41564002 bottom41564002 side 41564002 with 41564003
bottom
41563012 with 41563013
front˙ side inside
41564000 41564000 with 41564001
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S
7 • Section 2 Jan 2017
PCC Replacement Guards that fit Altec LRV Platform Mounting Assembly, Shaft Mounted Controls
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S
Jan 2017 Section 2 • 8
PCC Replacement Guards that fit Altec LRV Shaft Mounted Controls with Dashboard, Front Mount Unit
’07
& e
arli
er
’07
& e
arli
er
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S
9 • Section 2 Jan 2017
PCC Replacement Guards that fit Altec LRV Platform Mounting Assembly, Platform Mounted Controls
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S
Jan 2017 Section 2 • 10
PCC Replacement Guards that fit Altec LRVBoom Assembly - Front Mounted, Platform Mounted Controls
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S All parts are PCC manufactured replacements for specified brands.
11 • Section 2 Jan 2017
PCC Part # Description
41510200 Control Guard for end hung bucket 27” x 17” x 10” - Altec P/N 70680241 (cut out right side)
PCC Replacement Guards that fit Altec LB Series
insidefront front showing right cut-out
41510205 Control Guard for end hung bucket 27” x 17” x 10” - Altec P/N 70680241 (cut out left side)
insidetop showing left cut-out
41550500 Altec Boom Tip Cover Top - Altec P/N 4-706-00068 or 706-00193 (No large holes) 41550600 Altec Boom Tip Cover Bottom - Altec P/N 4-706-00069 or 706-00194 (No large holes)
41550500 side
When looking at the end of the boom, if the bucket is mounted on the right side of the boom, then the parts are Top & Bottom. If the bucket is mounted on the left side, then the parts are reversed, Bottom & Top.
41550600 side 41550600 insideboth side by side
41550500 side 41550500 inside
Jan 2017 Section 2 • 12Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S
PCC Replacement Guards that fit Altec LB Series
13 • Section 2 Jan 2017Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S All parts are PCC manufactured replacements for specified brands.
41510150 Control Guard 22-1/4” x 17” x 11”AA Series
41520400 Side Plate Guard - end hung bucket (bucket requires 2) Altec P/N 4-706-80008, 706-80109, 706-80095, 706-80146, 706-80690 or 706-80691
41530300 Control line cover duct for end hung bucket L shape 16” long
41530310 Control line cover duct for end hung bucket L shape 17-1/2” long (new larger)
PCC Replacement Guards that fit Altec: Miscellaneous
insidesidefront
side inside
side inside
front
top
bottom
inside
PCC Part # Description
41510100 Control Guard 22” x 17-1/2” x 7-1/2” Altec 70680007 AA600 AM900 LB650
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S
Jan 2017 Section 2 • 14
PCC Replacement Guards that fit Altec AA Series
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
Call for additional bucket configurations.
15 • Section 2 Jan 2017
PCC Replacement Guards that fit Lift-AllPCC Part # Description
44510100 Control Cover Liftall 18” x 20” x 9”
side
top
side
inside
inside inside
PCC Part # Description
41510350 Altec Style Control Guard - AT37G Series 34” x 26-1/2” x 13”
PCC Replacement Guards that fit Altec AT Series
44510932 Liftall Hose Cover
44518632 Liftall Hose Cover
445510932 top
44518632 top 44518632 inside
445510932 inside
Jan 2017 Section 2 • 16Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S All parts are PCC manufactured replacements for specified brands.
48030300 Line Duct Cover
48050500 Upper Elbow Cover - Small TECO P/N 70737006
48050600 Upper Elbow Cover - Saturn style TECO P/N 70737108 XT-52
top
top
top
inside
PCC Part # Description
43510600 Control Guard 30” x 20” x 10” - HR P/N 447276
PCC Replacement Guards that fit Hi-Ranger XT (continued on next page)
front side inside
PCC Replacement Guards that fit TECOPCC Part # Description
48010100 Control Guard 16” x 16” x 7” TECO P/N 30306403
front inside
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
17 • Section 2 Jan 2017
43541600 Corner Duct HR P/N 447278
insidefront
top side up side down
PCC Part # Description
43510610 Control Guard 30” x 18” x 8-1/2” I/S XT-52
PCC Replacement Guards that fit Hi-Ranger XT (continued on next page)
43510620-21 43510620-21 43510620-21
43510620-21 right
43510620-21 left
435610622-23 left 435610622-23 right
43510622 Control Guard Dump Style - fiberglass - HR small upper cover HR P/N 453817
43510623 Control Guard Dump Style - fiberglass - HR large lower cover HR P/N 454696 without extra cylinder on bottom of valve body
43510620 Control Guard Non-Dump - fiberglass - upper half HR P/N 453415 small
43510621 Control Guard Non-Dump - fiberglass - lower half HR P/N 454855 large
620
621
622
623
Jan 2017 Section 2 • 18Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
PCC Replacement Guards that fit Hi-Ranger XT (continued on next page)
PCC Part # Description
43510626 Control Guard Dump Style Extended - fiberglass - HR extended lower cover to accommodate extra cylinder on bottom of valve body
43541000 Upper Boom lower hose cover HR P/N 446851, may also correspond to 450267 or 475602
43541300 End Plate Bucket End Upper Boom (Clear Poly. Carb.) 10” x 10” x 1” radiuses HR P/N 444727
43541301 End Plate Elbow End Upper Boom (Clear Poly. Carb.) 8-1/2” x 8-1/2” x 1” radiuses
43541010 Upper Boom Tip Hose Cover HR P/N 447253
43541813 Double Tools Cover with Tilt
inside
top inside
front
insidetopside
19 • Section 2 Jan 2017Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D S
PCC Replacement Guards that fit Hi-Ranger XT
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
Call for additional bucket configurations.
Section 2 • 20Jan 2017
outside
PCC Part # Description
43541302 End Plate Elbow End lower Boom (Clear Poly. Carb.) 10” x 8-1/2” x 1” radiuses
PCC Part # Description
43510110 Control Guard fits 5TC 21” x 17-3/4” x 8”
43510200 Control Guard fits 5F/5G/5H 21” x 17-1/2” x 8”
43541303 End Plate Elbow End lower Boom (Clear Poly. Carb.) 9-3/4” x 8-1/2” x 1” radiuses
43542096 Rectangular boom protective cover (two halves) 10” x 6” x 96”
42052100 Tape for plastoc boom covers - 3” x 108’
PCC Replacement Guards that fit Hi-Ranger XT
PCC Replacement Guards that fit Hi-Ranger 4 & 5 series (continued on next page)
top inside
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
Call for additional bucket configurations.
Jan 2017 21 • Section 2
PCC Part # Description
43520800 Sheave Guard fits 5F/5FB 9-1/2” x 28” x 17” tall
43520900 Sheave Guard fits 5H - Fits Models 5FA/5G/5H/6H 20” x 28” x 19” - flat surface depth of 11”
435210XX Sheave Guard fits 5TD Prior to PCC 2003
43531618 Control Guard fits 5OC I/S Top 18” x 19” x 7” Bottom 17-1/2” x 19” x 6-1/2”
43550203 Cover Jib art. cyl. - on right side looking down at elbow fits 5TC HR P/N 460203
PCC Replacement Guards that fit Hi-Ranger 4 & 5 series (continued on next page)
side inside
4352101X Sheave Guard fits 5TD PCC 2003 and later
sidefront back
top
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
Call for additional bucket configurations.
Section 2 • 22Jan 2017
PCC Part # Description
43556792 Cover Jib art. cyl. - on left side looking down at elbow fits 5TC HR P/N 456792
43551802 Cover Jib winch - inside fits 5TC HR P/N 461802
43551801 Cover Jib winch - outside fits 5TC HR P/N 461801
PCC Replacement Guards that fit Hi-Ranger 4 & 5 series (continued on next page)
side front side inside
43550205 Cover Rotater bracket fits 5TC HR P/N 460205
43550210 Cover Lanyard anchor fits 5TC HR P/N 460210
top side
front back
inside
side top inside
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
Jan 2017 23 • Section 2
43556793 Cover Jib rotation arm fits 5TC HR P/N 456793
43556794 Cover Jib cyl. anchor fits 5TC HR P/N 456794
43556789 Cover Control - bottom fits 5TC HR P/N 456789
PCC Replacement Guards that fit Hi-Ranger 4 & 5 series
side 3/4 view side inside
PCC Part # Description
43556786 Cover boot - top fits 5TC HR P/N 456786
43556787 Cover Boot-bottom fits 5TC HR P/N 456787
43556788 Cover Control - top fits 5TC HR P/N 456788
side side top inside
side top side
top side inside
inside
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
Section 2 • 24Jan 2017
PCC Part # Description
43531100 Duct Cover 24” Bucket
43531200 Duct Cover 30” Bucket
43531210 Duct Cover 30” Bucket PCC bucket
43531210 Duct Cover 30” Bucket - PCC bucket
43531300 Duct Cover 38” Bucket
43531400 Duct Cover 48” Bucket
43531401 Duct Cover 48” Bucket - wide other (does not fit PCC 48” buckets)
43510550 Plastic Conversion Guard fits 6T
43531415 Duct Cover fits 6TD HR P/N 101920
side inside
PCC Replacement Guards that fit Hi-Ranger: Miscellaneous (continued on next page)
insidetop
side inside
PCC Part # Description
43510300 Control Guard fits 6T 19” x 18” x 7”
43510400 Control Guard fits 6H 19” x 18” x 7” (2-1/2” bottom hole)
43510500 Control Guard fits 6H 19” x 18” x 7” (3-1/2” bottom hole)
PCC Replacement Guards that fit Hi-Ranger 6 series
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
Jan 2017 25 • Section 2
PCC Part # Description
43510624 TPL Control Guard - Telelect/HR style 24” x 23” x 11- 1/4”
43510625 TPL Boom Guard - Telelect/HR style 17” x 7” x 5-1/2”
PCC Replacement Guards that fit Telelect
PCC Part # Description
43531410 Duct Cover 48” Bucket - PCC bucket
43531411 Duct Cover 48” Bucket - wide current PCC bucket
43541700 Control Head Bracket - Upper
inside
PCC Replacement Guards that fit Hi-Ranger: Miscellaneous
insidetop
top
43548510 Tool Outlet Cover for HRX-55
43544724 Access Cover Upper or Lower Boom HR P/N 444724
41020410 Clamp Protection Cover - 2 pieces
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
Section 2 • 26Jan 2017
side
PCC Replacement Guards that fit Asplundh (continued on next page)
PCC Part # Description
42011000 Control Cover for Asplundh / Altec - old style 23” x 13-1/2” x 7-1/2” (w/o cutout at bottom)
front
top
top
bottom inside
PCC Part # Description
41010101 Control Guard AL 6050 I/S Top 28-1/2” x 15” x 11-1/2” Bottom 28-1/8” x 15” x 7” (color - white)
41070200 Tool Block
41050100 Boom Tip Cover 19-3/4” x 10-3/4” - Center 13-1/2” x 10-3/4” (Polycarbonate)
PCC Replacement Guards that fit Aerial Lift of CT
Fax 260-483-2532 • www.BucketTruckParts.com
CALL TO ORDER 260-484-3139
R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.
Jan 2017 27 • Section 2
PCC Replacement Guards that fit Asplundh
PCC Replacement Guards that fit Versalift
side side front inside
PCC Part # Description
49510100 Control Guard 20-1/2” x 23” x 8”
PCC Part # Description
42011100 Control Cover for Asplundh / Altec - current 22” x 14” x 7-1/2” (with cutout at bottom)
42052100 Tape for plastic boom covers - 3” x 108’
outside
42051500 Lower Boom Leveling Cover 30” Asplundh LR45 & LR50 Center section
42051600 Lower Boom Leveling Cover upper section (has hump)
42051300 Lower Boom Leveling Cover Asplundh LR45 & LR50 Lower section
42051400 Lower Boom Leveling Cover 60” Asplundh LR45 & LR50 Center section
front
front
42051800 Set LR 45-50 Lwr Boom Leveling Covers 420513, 42051400, 42051500, 42051600
42051996 Circular Boom Cover - 96”
bottom inside