Download - Machinery Listings - FINATEX Internationalfinatexinternational.com/Machines-calendar.pdf · 2016-05-07 · Erhardt Leimer fabric guiding system, electric heating, electric panel with

Machinery Listings Finatex International: Please ask for details at: [email protected]

-

Ramisch Kleinewefers

Calender

-1X Ramisch Guarneri CalanderYOC 1999/2000 installed Model E. 360.2000worked less than 2 weeks in MonthWorking Width 1900 mmTop Roller RacolonOil heatedMiddle Roller SteelBottom Roller RacolonPressure 50-60 tonsE&L Guiders KF2040Delivery to A-Frame

PRICE:90.000 Euro CNF THE MACHİNE İS LOCATED İN GERMANY.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 9137 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/9137.zip

Complete Lines

Multiple

Calender

-CALENDARS FOR WOVEN AND FOR KNITTING FABRIC / EMBOSSING MACHINES / TRANSFER PRINTING MACHINES FOR WOVEN AND KNITTING FABRIC / COMPACTORS FOR KNITTING FABRICO1_P ONE MULTIFUCTIONAL MACHINE FOR CALANDERING, EMBOSSING AND TRANSFER PRINTING WOVEN AND KNITTED GOODS, MADE BY BERTEX ( BERGI GROUP) TYPE SUPERNOVA, Y.O.C 2003, ROLLER WIDTH 2.000 mm FOR A MAX FABRIC WIDTH 1.800 mm. Embossing, calendaring, coupling and transfer printing operations are possible with Supernova machine. Working pressure adjustable up to 220 kg / cm. 01 heating calendaring cylinder designed to avoid flection. 01 heating system of the calendaring cylinder by means of diathermic oil. 01 electric oil boiler inside machine installed. Max calendaring cylinder temperature up to 220°C. 01 long life counter - pressure felt, no need for grinding or replacement after a short working period. PHOTOS ARE AVAILABLE IN P. ROPE SPECIAL FINISHING MACHINES IN WET AND-OR DRY EXECUTION



Reference: 14079 Terms: -Cost: 0 Pictures not available

Finishing

Anzini

Calender

-1 ANZINI Calender yoc 2000, for woven fabric, width 2600 mm., w.width 2400 mm, 3 cylinders (1 paper-wool, 1 steel, 1 paper-wool), pressure 25000 kgs., Erhardt Leimer fabric guiding system, electric heating, electric panel with thermometers, Exit with arm rolling up system with independent drive.




Beta

Calender

Beta Calenderyear 1989180 cm3 bowls ( 2 x Recalon, dia 680mm, 1 x Steel dia 500mm)Hydraulic Pressure 60 tonsMetal and Seam DetectorsBianco Weft Straightner type: VDTEXThermic oil heatingCooling over Recalon Rollers Excellent condition

Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 8059 Terms: EACH, EURO, CNF

Cost: 30,000 http://finatexinternational.com/pictures/8059.zip

-BETA CALANDER YOC 1981W.W. 3400 MM 4 BOWLS, 2 STEAL 2 COTTON PRESENTLY THEY USING ONLY 3 BOWLS AS PER THEIR FABRIC NEEDS FOUTH BOW IS AVAILABLE.PRESSUR 80 TONS.Look to hearing you.




Clemipiega

Calender

01 Embossing Calander Clemipiega by Clerici / ItalyWorking width max. 3200 mmProduction per hour: 110 meterConnected pwer: 30 KWYear of construction: 2005 Modell: PINCH 320

Location: EuropeDelivery: readyPrice: upon request



Colombo

Calender

-1 M150 COLOMBO CALENDER for warp and weftYear: 1985, width 1500 mm; with input and output by taking up. 380 V - 50 HZ




Comerio Ercole

Calender

-1 used Calander Comerio working width 2 mt, 3 cylinder( 1 inox, 2cartalana)




Ferraro

Calender

- Tubular Calendar Machine • Availability: End of April 2014




-1 POLISHING CALENDER FERRARO MACHINE, MODEL C2E FV YEAR 1997 1 POLISHING CALENDER FERRARO MACHINE, MODEL CUD FV YEAR 1997

Details: For tubular knitting fabricSteamPneumatic pressurePrice: 15.000,00 Euros CNF Most Sea Port





Fleissner

Calender

-Production line: Fleissner Thermoprocessing Line, working width 220 cm, y.o.c. 1988

Description of line:•Unwinding unit•Dancer•Emulgator unit•Oven with 2 tumblers + 1 hot calander, heating system: Hot vapour, working temp. 160 – 170⁰C•Dancer •Cutting & Winding unit

The line is in use for thermoprocessing of needlepunched cleaning wipes




Guarneri

Calender

01 GUARNIERI calender, year 1991, roll width 1850 mm, 4 rolls (paper wool-cotton- steel- paper wool), hydraulic pressure 40 Tn, automatic seam detector, steam heating, exit by batcher for A-frames.




GUARNERI CALENDER TYPE 360 WW 2000/1800 YOC 1997



-01 GUARNIERI calender, year 1991, roll width 1850 mm, 4 rolls (paper wool-cotton- steel- paper wool), hydraulic pressure 40 Tn, automatic seam detector, steam heating, exit by batcher for A-frames.




-GUARNIERI calenderyear 1991, roll width 1850 mm, 4 rolls (paper wool-cotton- steel- paper wool), hydraulicpressure 40 Tn, automatic seam detector, steam heating, exit by batcher for A-frames.




-01 GUARNIERI calender, year 1991,roll width 1850 mm,4 rolls (paper wool-cotton- steel- paper wool),hydraulic pressure 40 Tn,automatic seam detector,steam heating,exit by batcher for A-frames. Price CFR Karachi (net) is Euro 35.000,0




Cost: 0 Pictures not available

-1 no - GUARNERI CALENDER FOR WOVEN FABRICS, type: E.470, y.o.c. 1996Fabric Width: 3200mm, Roller Width: 3400mm4 Bowls, Chromed Heated+Recalon+Recalon+Chromed HeatedHydraulic Pressure upto 100 tonsMetal Detector, Seam DetectorExit with Motorized Batcher380 V, 3 phases, 50 Hz, 50 kWmax temperature: 200°C on the rollsSteam heatedMachine stopped/installed Location: Milano airport

price exw Italy: on demand EUR



Reference: 15560 Terms: -Cost: 0 http://finatexinternational.com/pictures/15560.zip

Kettling & Braun

Calender

-KETTLING & BRAUN CALENDER MACHINE - WEFT STRAIGHTENER CORINOwidth 1900




Kleinewefers

Calender

Thermobonding Calender Ramisch Kleinewefers RKK 230Manufacturer: Kleinewefers KTM ( Germany )Year - 1998Set consists of:double-roller calenderhydraulic and oil installationdesk and control panelSpecification:•nonwoven: PP, PES, PA and blends needle nonvoven•grammage 30 – 150 g/m2•nonwoven max width – 2200 mm•max width after calendering and cutting the edge of nonwovwn - 2000 mm•working speedPA nonwoven 100 – 150 g/m2 – max 10 m/minPP and PES nonwoven 30 – 100 g/m2 – 15 -50 m/min•working pressure range 50 -80 N/mm•heating factor - heating oil•driving power - ( steel and coolling rolls,hydraulics, lubrication ) - about 24 kWFCA 68,000 Euro, dismantled and packaged and loaded in truckExcellent condition - very seldom used

Location: Europe (Shengen zone)

Codition: Very good - running




-KLEINEWEFERS NIPCO CALENDER

4 cylinders,2 steel,1 paper,1 polymid. 260 cm,255 working widthOil Heated system.1998 yoc

Price:145.000 eur CNF





-1 Calander Kleinewefers Type RKK340 -Nipco L Year 1992 Fully Revisied in Year 2014machine width 2000mm Working width 1800mm3 rollers 1 Steel rollers dia. 300mm (The Cahace Cotton cylinder) 1 Racolan dia 600mm,1 Steel Roller dia. 300mm (The Cahace Cotton cylinder) 1 Cotton cylinder dia 300mm Extra Oil and electrical heatingPressure 50 to 200 tonsWith complete Thermo Oil Heating 300C Price CFR sea port: on demand EUR




-CALENDER KLEINEWEFERS, year 1968, hydraulic pressure, working width 1800 mm, actually using for embossing but there is a cotton cylinder to replace, 3 rolls ( steel-cotton-steel), electrical heating, maximum pressure 60 tn, new electrical pannel, exit roll, manual cranes for replace cylinders, in working condition.




-KLEINEWEFERS CALENDER, type NIPCO I RKK 280, year 1997, w.w. 2600 mm, entry with axial unrrolling device, rail sewing machine, introduction feeder with sewing and metal detector, Corino centralizing device, infrared heating, 2 cylinders ( steel and racolan ), electrical heating, pressure 50 Ton, cooling cylinders, inspection table, exit with revolver rolling device.




-1 piece - CALENDER KLEINEWEFERS, y.o.c. 1968, working width 1800 mm , hydraulic pressure, actually using for embossing but there is a cotton cylinder to replace, 3 rolls ( steel-cotton-steel), electrical heating, maximum pressure 60 tns, new electrical pannel, exit roll, manual cranes for replace cylinders, in working condition.Location: France




-KLEINEWEFERSCALENDER MACHINEWidth 1.60 mt . 1 reserve cylinder




Kuesters

Calender

Küsters Calander.2 Bowls,upper Steeellow RACOLANThermo oil heatedType: 212.50.1800YOC 1983

Delivery: readyPrice: upon requestLocation: Italy



-KUSTERS CALANDER-Kusters - Germany-Year 2003-Model 212.72-Working width 3400 mm-2 cylinders - -Top cylinder steel and racolan cylinder-Electrical heated-Metal detector-Sewing detector




-KUSTERS CALANDER- Kusters - Germany- Year 2003- Model 212.72- Working width 3400 mm- 2 cylinders - - Top cylinder steel and racolan cylinder- Electrical heated- Metal detector- Sewing detectorPrice and photos at request.




-SECOND HAND MACHINES 5- rollers calander Producer KUSTERS YOC 1988 Production number 110 – 22018 Dimension ( mm ) 2,0 x 5,2 x 3,5 Weight ( kg ) 9.000 Width of rolles ( mm ) 2.600 Working width ( mm ) 2.400 Basic technical : five rollers heating the second roller from below at the entering na vstupu lapač kovových částí přítlak 600 kN rychlost max 60 m/min pára 6bar, 110 kg/hod horní hladina teploty 130 C spotřeba tlakového vzduchu 6 bar / 4 m3 / hod chladící voda 4 - 5 bar / 5 m3 / hod výkon 43 kW elektrická energie : 220/380 V, 50 Hz Condition : Machine stop in July 2012 and is in very good condition.

ctual price is 29.000 € ex work.PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.




-Kuesters CalendarPrice:35.000eur EXW

YOC:19885 ROLLERS CALANDER FROM KUSTERS

DIMENSION:2 *5,2* 3,5WIDTH OF REOLLER:2600WORKING WIDTH:2400




-CalanderKÜSTERS, type 212.50-2600, Y.O.M. 1976, 240cm working width, 260cm roller width, speed: 150 m/min., line pressure 660 tons (230daN/cm) 2 cylinder: steel cylinder chromium-plated 400mm dia., steam-heated, bottom cylinder plastic S-roller 435 mm dia., seam control, metal control




- 1 KUESTERS 5-ROLLER CALENDER Year 1988 Working width 2400 mm Roller width 2600 mm Dimensions 2 x 5,2 x 3,5 m Location: Europe Available: Immediately Price: ex mill floor





-n°01- KUESTERS Calender, model 213-40, YOC 2001, width 3600mm, working width 3400mm,with S-ROLL. For embossing, smoothing, lurching, light compaction. Fabric weight 50-200 g/m2.Linear pressure max 100 N/mm, speed max 80 m/min, min 2 m/min. Main command power 16 kW,tension: operation: 400V +/- 10%, command tension 230V, 50Hz. Water: required pressure 2-3 bar,temperature required 15-18°C. Compressed air required pressure 6 bar. Oil heated.N 3 rolls: elastic upper roll diam. 640mm, polycotton covered, with oscillating roller bearings;middle roll with steel shaft; lower roll Kuesters S-ROLL floating roll, diam. 500 mm, with flexure control.superior chromed steel roll diam. 300 mm. heating by thermic oil, middle paper roll diam. 500 mm.Hydraulic system for Kuesters floating roll and jacks with tank and pump, water cooling by heat exchangerwith temperature sensor and magnetic valve, correction device for pressure inside Kuesters floating roll.Cooling device for elastic roll covering and Kuesters floating roll covering, composed of 2 fans and1 tube for air cooling for each roll. N 1 Windener, N 1 group of 2 fabric cooling rollers diam. 180mmin stainless steel. Electric board. CAIPO seams controlling device for rollers protection.N 1 SALVADE reel, YOC 2001, width 3600mm, working width 3400mm, 2 rolling positions,roll diam. max 1800mm. Pneumatic braking for roll hardness control, transversal cutting at the beginningof the roll, pneumatic system for rolls lifting and safety. Stainless steel widener.TOTAL SELLING PRICE : €.280.000,00- mill-floorTOTAL SELLING PRICE : €.283.000,00- FOT





-1 KUSTERS calander 212 - 50 / 2800 year 1995, 2 bowls width 3000 mm, (1xsteel + 1x Racolan) , heating by thermofluid, sewing detector, metal detector, batching motion at exit, extensioning/selvedge-guide "Corino" at entry.

Price: Euro 75.000/-- CNF





1Kusters Calander, Model 213.60 – 2800, Year 1987Working Width 2.8 m, Roller Width 3.0 m, E&L Fabric GuidersMetal Detector, Top Cylinder Steel, Middle Cylinder RacolonBottom Cylinder Cotton, Pressure 60 tons, Oil HeatedAvailable:end 2012, still in productionUSD 130,000.00 CFR Major Sea Port




-KUSTERS CALANDER, MODEL 213.60 – 2800, YEAR 1987, WW 2.8 M, ROLLER WIDTH 3.0 M METAL DETECTOR, TOP STEEL, MIDDLE RACOLON, BOTTOM CYLINDER COTTON PRESSURE 60 TONS, OIL HEATED




-1 KUSTERS calander type 271.70 - 3200 year 1987, 2 bowls 3400mm (1 set chromed steel + 1 set racolan "S"bowl), working width 3200mm, direct gasheating,

Price: Euro 60.000/- CNF





-1 KUSTERS calander 212 - 50 / 2800 year 1995, 2 bowls width 3000 mm, (1xsteel + 1x Racolan) , heating by thermofluid, sewing detector, metal detector, batching motion at exit, extensioning/selvedge-guide "Corino" at entry.






-1 no – 5 rollers finishing calendar, brand: KUSTERS, type 215.50.2400, y.o.c. 1988/1989, working width: 2400 mm (95 inch), with SWIMMING S-ROLLS, roller width 2600 mm, max fabric width 2400 mm, 50 tons pressure, speed 5-60 m/min,comprising out of high cloth feeding, variable adjustable tension device on entrance, edge uncurlers make ERHARDT & LEIMER KF2020 pneumatic, metal detector, brand ERHARDT & LEIMER, Sewing detector electronic type NF12-ESG314 ERHARDT & LEIMER, expanding and tension inlet roller device, 5 rollers with the configuration from top to bottom, 1 TOP RACOLAN dia 420 mm, 1 COTTON dia 500 mm approx, 1 COTTON dia 500 mm approx, 1 STEEL polished and chromium-plated, dia. 320 mm, with steam heating, 1 RACOLAN 420 mm as SWIMMING S-ROLL, diameter are approx, racolan edge cooling, 2 water cooling rollers on calender, delivery onto big batcher, machine equipped and suitable for various fabric process lines using either 2 – 3 – 4 rollers by deviation device at entrance for rolling glazing silk finish pressing and dull effects.

SWIMMING S-ROLLThe machine is equipped with 2 swimming S-rolls, the upper installed roller and the lower roller. Swimming S-roll means that the pressure can be adjusted variable and the pressure will be on the complete width of fabric, means 20 tons pressure on the complete width of fabric remains the same pressure, 30 ton/40 tons the same. The inner life of the swimming S-roll will be filled with hydraulic oil by the oil generators and it creates the eveness pressure over the complete roller.




-1 calander KÜSTERSYoc 19962 cylinders thereof 1 steel + 1 RacolanSteel cylinder: L 3445 mm dia 460 mmRacolan cylinder: L 3400 mm, dia 500 mmMetal detectorGad heated ( max. 8,8 kwh/m3 )




-KUSTERS 2 Bowl CalanderModel 212,50-2400Year 1991Roller Width 2.6 m, Working Width 2.4 mTop Roller Steel, Thermo Oil heatedBottom Roller Racolon, with Cooling FanCEIA Metal DetectorEL Seam DetectorFabric Expander (spiral roller)Pressure 300 N/scmDelivery to A-Frame 1Spare Racolon Sleeve Location:MediterrareanCondition:Excellent, Pictures availableAvailable:Immediately, Still in production




Kyungwon

Calender

-Maker: Kyungwon machine co.,ltd , Korea.-Yom: 2003 years.-Model : KW-C3B (p.s.p)-machine speed : 70m/min.-Pressure : max,50 ton.-Temperature :200’ C.-Heating method : heater pipe (electric )-Bowl width: 1,800 mm.( 1st-paper,2nd-steel,3rd-paper. )-Working width: 1,650 mm.-complete set with standard accessories.

-Location : Korea.-condition : fully reconditioned on mill floor.-Available : immediately.




Menzel

Calender

-Felt CalanderMENZEL, Y.O.M. 1993, 240cm roller width, steam-heated, speed 40 m/min, cooling drum, tangential- and centre winder at exit




Monti

Calender

-1 pc - thermo printing calendar, producer: MONTI, Typ 93-1-2600, y.o.c. 2000, w.w. 2000 mm,speed 15 m/min, with Teflon coated cylinder, diathermic oil heating. Suitable for laminating and transfer printingLocation in Germanyprice ex-mill floor: on demand




Morison

Calender

-1 Morrison Machine Co. Calendar 82" wide, pneumatic pressure 20 to 25 ton, Serial 127, 3 rolls top and bottom roll composition 16" diameter, center roll polished steel 12" diameter, set up for hot oil heating, DC motor 10 HP with reducer, 300/150 volts, control panel




No Name

Calender

-90" (roll face ) 2 roll non woven calander - (was used for laminating film etc.) w. heating system




-Calender Line- Oil heated (HTT Heating unit), Morrison 80"- 3 roll calender Filled / Chrome / Filled, Riggs 78" - 2 roll calender Chrome / Rubber, Drum / blanket Laminator 80" / Teflon coated, Brush vacuum unit, Bow / Skew Unit, Metal detector, Portable tuber 85" wide


Reference: 9124 Terms: EACH, USD, MILL FLOOR


-Calander Machine – Korea-Year: 1998-Working width: 190cm-Type: 3bowl -2rollers paper + 1roller heating.




-16– Calander Machine – KoreaYear: 1998Working width: 190cmType: 3bowl 2rollers paper + 1roller heating. Condition: StoppedLocation: ASIA




Nuovo Pignone

Calender

-Calander NUOVO PIGNONE serial number 10262 + Weft straightenerTRAMATEX BIANCO YOC 1975




Perkins

Calender

1 PERKINS Calender, 71", 3 Rolls, Schriner/Husk/Steel, 80-Ton Hydraulic Pressure, (2) Spare Husk Rolls, 50 HP DC Drive Motor, S/N H6875-12-63 (I#1885)



-PERKINS NON-WOVEN CALENDER, 3-ROLL POLISHING, 110”, 50 HP/55, 111” FILLED ROLL / 110 ½” STEEL ROL / 111” FILLED, 1 ¼” STEAM PIPE, MENZELA-FRAME BATCHERPRICE: $72,000.00





-1 B. F. PERKINS CALENDER 42" Rolls 2-Rolls Horizontally Mounted Heated with Hot Oil 2 Spare Engraved Rolls 1 B. F. PERKINS Hot Oil Generator Control Console 1 BIRCH BROTHERS Batcher 3-Roll Automatic 42" Roll Face Condition: Very Good Price: F.O.T. USD 145,000.00





Calender / B.F. Perkins / 3-roll, 100" w, yr. 1994

B.F. Perkins Calender, 3-roll, Model FHTS-90-1, S/N H-9323, year July 1994- Top and Bottom rolls are Steel 101" wide x 16" diameter, hot oil heated; Middle Roll filled 100” wide x 22” diameter. With 2-Filled extra rolls 100” wide, (one new 24” diameter and another used 20” diameter)- Hydraulic Oil Pump motor tag: Cat M3708T-5, Spec 37A01Y34, Frame 215 T, Ser. No. F194, 5 HP, 575 Volt, 3 ph, 60 Hz, 6.3 Amp, 1160 rpm- Smaller Hydraulic Oil Pump motor tag: Cat M33534-5, Spec 34A61-901, Frame 56, Ser. No. W9-93, .33 HP, 575 Volt, 3 ph, 60 Hz, .64 Amp, 1725 rpm- Drive motor: 75 HP, Frame LC2812T2, ID No. 05KA593429-UW, 500 Volt, 126 Amp, 1750 rpm, max. speed 4500



Calender / Perkins / 79” wide, 80 Ton, yr. 1983

BF Perkins Calender 79” wide, 80 Ton, S/N H6318- 83, year 1983 consisting of:- Rolls: (2) Steel rolls 79” wide x 16” diameter (Driven for motor)(1) Covered roll 78” wide x 21” diameter(1) Extra Covered roll (New, 78” wide x 21” diameter)- Tensioner with 3-Steel rolls 76” wide x 4” diameter, 1-Bow roll, 79” wide x 4” diameter and 1-SS roll 79” wide x 5” diameter- Drive Motor: Baldor DC, 40 HP, Frame AD328AT, 1750 rpm, 500 Volt, Model LoIN 0000D0, S/N N078/0118-SFN/47- Hot Oil system S/N H6319-83 Model 75-1, 575 Volt, 60 Hz, 3 ph- Hydraulic motor: 7.5 HP, 60 Hz, 3 ph, 1745 rpm, Frame 2131, ID No. A91600-126K355RO71- Take up and let off stand- Take up motor 10 HP, 1750 rpm, Frame 310-1158450, 240 VoltPRICE: $85,000 LOADED FOT , warehouse, usa




Polteks

Calender

-POLTEKS CALENDER ADDITIONAL INFO

•Cylinders 3.40 cm•2005 model 3.20 working width•1 x set stainless steel roller 2 x sets polyemit cylinder•metal detector for input•Electrical heater,cold-hot heater including.•70 mt/min•80 ton roller pressure hydrolic




-2006 MODEL 320 WORKİNG WİDTH POLTEKS TREND WİTH 3 ROLLER PRİCE:100.000 EUR.





Ramisch Kleinewefers

Calender

-Thermobonding CALANDER RAMISH Kleinewefers RKK 230Manufacturer: Kleinewefers KTM ( Germany )Year - 1998Set consists of: double-roller calenderhydraulic and oil installation; desk and control panelSpecification: nonwoven: PP, PES, PA and blends needle nonvovengrammage 30 – 150 g/m2; nonwoven max width – 2200 mmmax width after calendering and cutting the edge of nonwovwn - 2000 mmworking speed; PA nonwoven 100 – 150 g/m2 – max 10 m/minPP and PES nonwoven 30 – 100 g/m2 – 15 -50 m/minworking pressure range 50 -80 N/mm; heating factor - heating oil driving power - ( steel and coolling rolls,hydraulics, lubrication ) - about 24 kW




Thermobonding Calender Ramisch Kleinewefers RKK 230Year - 1998Set consists of:double-roller calenderhydraulic and oil installationdesk and control panel

Specification:nonwoven: PP, PES, PA and blends needle nonvovengrammage 30 – 150 g/m2nonwoven max width – 2200 mmmax width after calendering and cutting the edge of nonwovwn - 2000 mmworking speedPA nonwoven 100 – 150 g/m2 – max 10 m/minPP and PES nonwoven 30 – 100 g/m2 – 15 -50 m/minworking pressure range 50 -80 N/mmheating factor - heating oildriving power - ( steel and coolling rolls,hydraulics, lubrication ) - about 24 kW

Excellent condition - very seldom used, very good running

Location: Europe (Shengen zone)


Reference: 8066 Terms: EACH, EURO, CNF


-NO. 01 CALENDERMAKE: RAMISCHYEAR: 1985WIDTH: 200 CMWITH HYDRAULIC IMPLANTOIL OR STEAM HEATEDWITH 3 CYLINDERS OF WHICH 2 STEELWITH PANELPOWER : 380V 50HZSTILL WORKING

PRICE OFFER




-1 RAMISCH CALENDER, year 1976, width 180 cm, 30 tons pressure, 4 cylinders (2 cotton, 1 paper, 1 steel)




-1 set RAMISCH KLEINWEFER CALENDERYear: 1989Type: NIPCO-I3 Rollers: Steel Engraved roller, Nipco Roller, Steel heated rollerHydraulic PressureMetal Detector at entryExit Batcher Excellent condition




- 1 Ramisch Kleinewefers Thermobonding Calender Type 3 Roll Thermo Hydrein Hot Oil Model RKK 330 Year 1992 Thermo Oil Heated Max Material Width 2850mm Roll Surface Width 3100mm Engraving Width 3100mm Top Engraving Roll 450mm Ø 270 ºC Temperature Hydrein Roll 380mm Ø 250 ºC Temperature Bottom Engraving Roll 450mm Ø 270 ºC Temperature Nip Capacity Top 15-80 N/mm Nip Capacity Bottom 15-80 N/mm Speed Range 4-80 m/min 2 Cooling Rolls 250mm Ø AC Drives 480 Volts / 60 Hz Price: ex mill floor USD 125,000.00 1 Boiler Unit Year 1992 Insulation & Flue Gas Nozzles Heating Capacity 600 kw Firing by Natural Gas & Light Fuel Oil Eclypse Dual Fuel Burner Circulating Pump, Expansion Tank, Drain Tank, Fill & Drain Station, Control Cabinet Base Frame Mounted Price: ex mill floor USD 45,000.00 1 Johannes Zimmer Coating Range / Paste Dot Year 1992 3m working width A Frame Entry / Menzel Accumulator / Menzel J Scray E&L Cloth Guiders / Roll Coating Paste Dot / Top & Bottom Magnets Sutron TP 35 Controller Johannes Zimmer Oven / 6 Zone / 12 Eclipse Natural Gas Burners Johannes Zimmer Cooling / Calendering Rolls Menzel Accumulator / A Frame winder with on line cutter Price: ex mill floor USD 145,000.00 15 A Frames 305cm Wide by 123cm High USD 1,500.00 each 1 Zimmer Engraving / Screen Washing USD 20,000.00 (12) Extra Screens USD 1,000.00 each





-RAMISCH CALENDER - new price reduction Dear Sir, we have the following machine for sale, subject to being unsold: 1 RAMISCH CALENDER, year 1976, width 180 cm, 30 tons pressure, 4 cylinders (2 cotton, 1 paper, 1 steel)




-1 SET OF RAMISH CALENDER YOC:1990 , DIMENSIONS: 10*7*7 W:2600 , WW:2400MM 5 CYLINDERS, ALL RACONAL, DIA:500MM 220V/380V, 50Hz




-1 set RAMISCH KLEINWEFER CALENDERYear: 1989Type: NIPCO-I3 Rollers: Steel Engraved roller, Nipco Roller, Steel heated roller (Brand new Plain Steel roller available to replace Engraved roller)Hydraulic PressureMetal Detector at entryExit Batcher Excellent condition




-1-Ramisch Kleinwefers Calendar Model RKK360, 86" wide, 100 ton, 2 rolls




-1 RAMISCH RKK 260 NIPCO I calander, year 1997, working width 260 cm, 2 bowls width 280cm (1 RACOLAN + 1 STEEL chromed), electric heating, metaldetector, sewing detector.




-1 Stück – 5 Walzen- Ramisch-Kleinewefers-Chassing-Kalander, BJ 1975 / 1 piece – 5 rolls calender, producer Ramisch-Kleinewefers, y.o.c. 1975, rollers width 1800 mmPapierwalze 500 mm Durchmesser – cotton roll 500 mm diameterPapierwalze 500 mm urchmesser – cotton roll 500 mm diameterPapierwalze 500 mm Durchmesser – cotton roll 500 mm diameterPapierwalze 500 mm Durchmesser – cotton roll 500 mm diameterStahlwalze 450 mm Durchmesser – steel roll 450 mm diameterWOB 1800 mm, Arbeitsbreite 1600 mm – roll width 1800 mm, w.w. 1600 mmDruck – 40.000 kp – pressure 40.000 kpGeschwindigkeit – 10-60 m/min – velocity 10-60 m/minDampfheizung – steam heatingPrice FCA Poland: on demand 1 piece – Babcock-Breitwaschmaschine, BJ 1989, WOB 1800 mm / wide washing machine Babcock, y.o.c. 1989, rolls width 1800 mmPrice FCA Poland: on demand Airport for inspection: Katowice in Poland




-1 x ramisch KLEINWEFER Calender Width : 3400mm | YOC : 1992 | Roller Width: 3400mm, Working Width: 3200mm, Heating: Steam Heated, Bowls: 2 Cotton Bowls, 1 Ebonite Bowl, 2 Steel Bowls, Complete Electrical Panel with drives




-1 x ramisch KLEINWEFER Calender Width : 3400mm | YOC : 1992 | Roller Width: 3400mm, Working Width: 3200mm, Heating: Steam Heated, Bowls: 2 Cotton Bowls, 1 Ebonite Bowl, 2 Steel Bowls, Complete Electrical Panel with drives




-Production line: Thermocalender line, brand: Ramisch-Kleinewefers, y.o.c. 1988

Description of line:-Working width 2400 mm, (2500 mm smooth/smooth).-Working speed up to 100 m/min.-2 pieces of steel working rolls with diameter 460 mm.One of them (upper) installed on calender stationary, with smooth surface.Another roll (lower) is possible to exchange:1)smooth surface roll - 100 % bind.2)engraved roll NW5 Casaretto - pattern 0,5 x 0,5 mm square, distance between centre 1,35 mm, height 0,3 + 0,3 mm, 13,72 % area bind, 54,9 points/SQM3)engraved roll NW22 Casaretto - pattern 0,9 x 0,9 mm square, distance between centre 1,65 mm, height 0,2 + 0,3 mm, 29,75 % area bind, 36,7 points/ SQM-Roll Bending system, pressure of the working rolls up to 150 bar.-2 pieces of water cooled cooling rolls with Cr-Nickel coat and diameter 250 mm.-Oil heating station, oil temperature up to 300 degree C, electrical heating, automatically handling.




-KLEINEWEFERS RAMISCH CALENDER3 cylinders1997 model320 cm working width

PRICE:125.000 EUR CNF





-Calender / Ramish Kleinweifers / 80" Wide / 50 Ton

Ramish Kleinweifers two roll calender, 80" wide, 50 ton Serial number 111212.00, Year 1980Top roll is 16" dia x 80" face steel, driven roll, gas heatedBottom roll is 18" dia x 80" face with nylon sleeve Three roll tension with bow rollE-stop with pull cordNo control panelReliance 25 hp DC motor, Model 2MAF78174, 460 volt, 60 hz, 3ph, 23.5 amp, 1750 rpmHydraulic motor Model P1863883C, 230/460 volt, 60 hz, 3 ph, 13.0/6.5 amp, 1750 rpm, 5 hpA frame surface winder, 80" face, DC driven, One A frame drive, One take-up barPRICE: $45,000 LOADED FOT, warehouse USA





-1 RAMISCH CALANDAR 3 ROLL 101" ROLL FACE top roll 16" dia. steel , heated - electrical heater immersed in oil (heating element needs repair or replacement)2nd roll 20" dia , fill 3rd roll 25" dia , racolan ran 98" width fabric, with 5.5 ton pressure temperature range 350-550 degr.F. 58KW main motor, Machine was steam heated orig. and converted by Kleinewefers to oil mid.1980ies.electrical heating element - is missing. machine now running as cold calander. Asking price : US.Doll. 37500. ON PLANT FLOOR , IN N.AMERICA - negotiable





-RAMISH CALENDER

RAMİSH 3 CYLİNDER 1990 MODEL 220 WIDTH 2 STEEL AND 1 PAPER CYLINDER AND 1 BACKUP CYLINDER Price:50.000 EURO EX.WORK





-1 RAMISCH KLEINEWEFERS KTM calander RKK 260, year 1997, 2 bowls width 2800mm, working width 2600 mm, 1 electric-heated steel bowl (thermo-oil inside) and 1 Racolan bowl "Flexroll" with adjustable working width, metal-detector, inspecting table, sewing frame DMT with sewing machine "Thimonier", batching motion at exit.






-Ramesh gurneri calendar3"bowl No of roll 3 type Nipco”L yoc 2005 roller width 3400mm WW 3200mm one teflone roller second oil heated hot chrome roll No of 3 back roll of corton with themo oil boiler make Italia with machine entry metle ditecter seam ditecter with uncurlor mechanical bar complete machine electrical load 65”kw.Machine exit winding batcher drive machine very very short time used by fabric machine like new.




-1 no – 5 rollers chaising calendar, brand: RAMISCH KLEINEWEFERS, y.o.c. 1992, in 2010 completely revised, working width: 1800 mm (71 inch)by new surface on rollers, gear box, drive system, hydraulic line system, electronically, and frame work grinded and newly paint coated roller width 2000 mm, fabric width 1800 mm, 60 tons pressure, comprising out of 5 rollers, high cloth feeding device from the side, stainless steel guiding and deviating roller, entrance into top roller deviation system by crossing the fabrics, delivery onto compensator for multi lay of fabrics with 7 upper and 7 lower rollers with edge curlless make of ERHARDT-LEIMER KF 2020, stainless steel guiding for feeding into multi lay into chaising calendar;

calender configuration from top to bottom as follows:1 TOP ROLLER RACOLAN SULZER SCHER WYSS NIPCO roller nyon 6/6 sleeve with inside pressure up to 60 tons, variable adjustable, Diameter 500 mm, 1 RACOLAN roller 500 mm diameter, 1 RACOLAN roller 500 mm diameter, 1 RACOLAN roller 500 mm diameter, 1 RACOLAN SULZER ESCHER WYSS roller nylon 6/6 sleeve with pressure from inside, pressure variable adjustable,

delivery of fabric onto big batcher via 2 bow rollers for plain delivery of the fabric, machine with separate hydraulic station system, electric panel board with TEXTOGRAF 4001 control and dashboard, SIEMENS SIMATIC S5 control

Location: Germany




-1 calender 2 rolls, brand: RAMISCH-KLEINEWEFERS KTM, type RKK 260, y.o.c. 1997, working width 2600 mm, rolls width 2800 mm, 1 steel roll electrically heated (diatermic oil in the roll), 1 Flexroll Racolan, Metaldetector, inspection table, sewing machine "Thimonier", winding unit on exit




-1 piece – used 2 rolls thermobonding caleder, producer Ramisch-Kleineweferstype RKK 230, y.o.c. 1998, working width 2200 mm2 cooling rolls, hydraulic and oil unit (producer AURA, Germany), control board and control cabinetFor needle bonded fabrics PP, PES, PA and mixingFor fabric weight: 30 – 150 G/m²Working velocity: a) for nonwoven fabric PA with weight 100-150 g/m² - 10 m/min; b) for nonwoven fabric PP with weight 30-100 g/m² - 15 – 50 m/minPressure: 50-80 N/mm(electr. Heated) heating medium – diathermic oildrives – ca 24 kW, 380 V X 50 Hz X 3 phtechnical condition: superbPreis CFR Asian Port : 80.000,00 EUR





-RAMISH KLEINEWEFERS CALENDER ------------------------------------------------1 UnitYear 19972 bowls 300mm on face.Top bowl stainless steel heated by electric elements.Bottom bowl RACOLAN High entrance gantry with guide + tension rollers.Metal detector.Operator platformEntry with triple tension roller Exit with take off rollersA frame batche




Riggs & Lombard

Calender

-1 Riggs & Lombard Calendar, 78" wide, 2 rolls, top roll steel 12" diameter, rubber 20" diameter, Serial 1364, 5 HP motor and reducer




Santex

Calender

Finishing Machine -for Tubular Knitted Fabric

EXCLUSIVE SALE of:1 piece – Santaspred 120, Manufacturer: SANTEX, YOC-. 1998, Working Width 1200 mm, Weight 5 tons, Floor Space Requirement 60 m² (5 x 12 m),Power 12 kW,Compressed Air B bar, Max. Temperature 120°C, Price EXW ,Germany: 60.000,00 EUR (New price: 170.000,00 EUR) 1 piece – Shrinking and Friction Calender-Type BPK-R/PTM,Manufacturer: WEISS, YOC-. 1998,Working Width 1200 mm, Weight 5 tons,Floor Space Requirement 60 m² (5 x 12 m), Power 12 kW,Compressed Air 6 Bar, Temperature: 100°C,Price EXW - Germany: 60.000,00 EUR each New price each: 260.000,00 EUR) 1- Set-Wet Overstretch and Shrinking CalendarType AMK-Q-ATM-VE,Manufacturer: WEISS, YOC- 1997,Working Width 1200 mm, Temperature: 30°C,Weight 8 tons, Floor Space Requirement 60 m² (5 x 12 m), Power 19 kW, Compressed Air 6 Bar,with (Twist off) Overhauler for Tubular Knitted Fabrics-Opener for Tubular Fabrics,Manufacturer: Erhard+Leimer, YOC-. 1997,Weight 1 Ton, Floor Space Requirement 15 m² (3 x 5 m),Power 3 kW-Price EXW Germany: 80.000,00 EUR (New price: 300.000,00 EUR) Technical Condition: -Excellent-Location: airport Dresden in Germany.




VanVlaanderan

Calender

EMBOSSING CALENDAR -Used VanVlaanderan Embossing Calender, 66" face, Tandematic Entry with Scrolls, Cooling Zone, Plaiter, Gas fired, Full Auto Flame safety, Electric Temperature control, SEW Euro Drive W/ AC Inverter, New Control Panel, Hydraulic pumps, Circulating Oil Pump for Bearings, Emergency Stops, Includes a MoirÃ© pattern roll installed and one spare paper roll.



Verduin

Calender

-VERDUIN CALENDER MODEL SCHREINER, 104”, 20 HP REEVES VARI-SPEED, 220/440 VOLT, GAS HEATED(1) PAPER ROLL 23” DIA. (1) STEEL ROLL 15” DIA. 100-TONPRICE: $ 42,000.00





-1-Verduin Calendar, 105" wide, 80 ton, 2 rolls, hydraulic pressure




-1 John Verduin Calendar 68" wide, 2 rolls, 20 ton pressure, Serial 478 B6928, set up as a cold calendar, motor drive, Hydraulic pump and motor with control cabinet




Calender / Verduin / 3-roll, 131” wide, yr. 2000

A) Driven Tension Device 130” wide with 1-Rubber roll 130” wide x 14” diameter and 2-SS rolls 130” wide x 6” diameter. Motor: 5 HP Model PL1860306238, CAT No. D5005P, 1750/2300 rpm, Arm Volts 500, Field Volts 150/300, 8.5 Amp, S/N NO40/0237-000511-12

B) 1 Bow Roll 129-1/2” wide x 6” diameter

C) Verduin 3-roll calendar year 2000, S/N 800D3218. Rolls: 1-Steel Top Roll 131” wide x 21-1/2” diameter, 1- Filled Middle Roll 129-1/2” wide x 23” diameter hydraulic off-nip drive on middle roll and 1-Steel Bottom Roll 131” x 22” diameter. Top and bottom rolls can be heated with hot oil; however, top roll is the only roll being heated at this time

D) DC Motor mounted on top of the machine so that makes it a top roll drive. 100 HP, Model P36801410155, Cat No. D50100P-BV, Frame 368AT, 1750/2000 rpm, Arm Volts 500, Field Volts 150/300, Arm Amps 161, Field Amps 4.6-3.5-2.3-1.75, S/N NO41/0128-010627-05

E) Hydraulic Unit for the tonnage (130 Ton) with 10 HP motor Model WW10-215T, S/N 20354 ACJ, Type VPHE, Frame 215T, 1760 rpm, 230/460 Volt, 24.8/12.4 Amp, 60 Hz

F) Hot Oil System made by American Industries 10/7.5 HP, ID 6424446/A05A0710553F, Frame 215TCV, 3485/2000 rpm, 575 Volt, 11 Amp, 50/60 Hz

G) DC Motor Drive

H) 3-Spare Rolls: 1-Used Steel Roll 131” wide x 20” diameter, 1-Used Filled Roll 130” wide x 22” diameter & 1-New Filled Roll 130” wide x 26” diameter

The price is $140,000 CNF. Attached are pictures.




Calender / Verduin / gas fired, 80” wide, 80 Ton, yr. 1992

Verduin Calender gas fired, 80” wide, 80 Ton, S/N D1545, year 1992- Rolls: 2-Steel Rolls 80” wide x 16“dia., (Top & Bottom), 1-Filled Roll 80” wide x 22“ dia., (Middle- Good condition), 1-Extra Filled Roll 80” wide x 19“dia., (Fair condition - Needs re-filling), 3-SS Rolls 80” wide x 5“dia., 1-SS Roll 80” wide x 19“dia.- Drive Motor: DC, General Electric, 30 HP, Model 5CD363NC002A007, S/N SF-8-401-YF, Type CD 2513ATC, 500 Volt, 50.5 Amp, 1750/2300 rpm- Hydraulic Motor: AC, 10 HP, 1745 rpm, Frame 215 TC, 230/460 Volt, 60 Hz, S/N 3784424- Hydraulic pump for lubrication of bearings- D/C Control Panel* Missing gas valves


Reference: 7706 Terms: EACH, USD, FOT


Weiss

Calender

-wet overstretch and shrinking alendar type AMK-Q-ATM-VE, manufacturer: WEISS, y.o.c. 1997, working width 1200 mm, temperature: 30°C, weight 8 tons, floor space requirement 60 m² (5 x 12 m), power 19 kW, compressed air 6 bar, with (twist off) overhauler for tubular knitted fabrics- opener for tubular fabrics, manufacturer: Erhard+Leimer, y.o.c. 1997, weight 1 ton, floor space requirement 15 m² (3 x 5 m), power 3 kWPrice EXW Germany: 65.000,00 EUR





-shrinking and friction calender type BPK-R/PTM, manufacturer: WEISS, y.o.c. 1998, working width 1200 mm, weight 5 tons, floor space requirement 60 m² (5 x 12 m), power 12 kW, compressed air 6 bar, temperature: 100°C, Price EXW Germany: 48.000,00 EUR





Wumag

Calender

-1 Wumag Texroll Smoothing Calendar, Year 1999, 130" wide (3300 mm), top roll chrome steam heated, bottom roll rubber covered with water cooling system, 450 mm roll diameter, hydraulic pump and motor for pressure, nip pressure max. 600 N/cm, (25 to 30 ton)


