Sale under Management of:
Thomas Industries, Inc.2414 Boston Post Road, Guilford, CT 06437-2310
Phone (203) 458-0709 • Fax (203) 458-0727 email: [email protected] • www.thomasauction.com
MAJOR ONSITE & WEBCAST AUCTIONFEATURING:
(11) CNC MACHINING CENTERS & TURNING CENTERS• TOOLROOM • INSPECTION • PLANT SUPPORT
MAJOR ONSITE & WEBCAST AUCTIONFEATURING:
(11) CNC MACHINING CENTERS & TURNING CENTERS• TOOLROOM • INSPECTION • PLANT SUPPORT
Ultra-Clean CNC and Grinding Machinery
HARIG 6" X 12" SURFACEGRINDER
SUPERMAX #MAX-3 CNC VERTICALMACHINING CENTER
SALE SITE: Mutual Precision, Inc., 100 Doty Circle, West Springfield, MassachusettsSALE DATE: TUESDAY, JULY 14, 10:30 AM (EDT)
OKAMOTO #12-24STHYDRAULIC SURFACEGRINDER
MOORE #G-18 JIGGRINDER
SUPERMAX #YCM-XV-1020A CNC VERTICALMACHINING CENTER
SUPERMAX #YCM-XV-560A CNC VERTICAL MACHINING CENTER
New2005
New1998
New1989
New2000
VeryLate
New2003
Low Hours
New2005
1 of 2
Low Hours
C O M P L E T E L O T C A T A L O G & P H O T O S A T : W W W . T H O M A S A U C T I O N . C O M2
CNC MACHINING CENTERS & TURNING CENTERS
FADAL #VMC-4020-HT CNC VERTICAL MACHINING CENTER
New1989
SUPERMAX #YCM-XV-1020A CNC VERTICAL MACHINING CENTER
LowHours
OKUMA #CROWN BIG BORE CNC LATHE withOKUMA CNC CONTROLS / OKUMA CNC LATHEINTERIOR VIEW
CNC VERTICAL MACHINING CENTERS
(2) (New 2005) SuperMax #YCM-XV-560A CNC Vertical Machining CentersW/ 16 1/2" x 27 1/2" Table, (20) Position ATC, #BT-40 Spindle, Tavels 18"-X,16"-Y, 12"-Z, Coolant System W/ Skimmer, Full Enclosure and FANUC MXP-200i CNC Controls, S/N 410609; 409583
(New 2003) SuperMax #YCM-XV-1020A CNC Vertical Machining Center W/20 1/2" X 44" Table, (24) Position ATC, #BT-40 Spindle, Travels 40"-X, 20"-Y,20"-Z, Full Enclosure, Auger Type Chip Conveyor and Coolant System W/Skimmer, FANUC MXP-100i CNC Controls, S/N 309579
(New 2000) SuperMax #Max-3 CNC Vertical Machiing Center W/ 15 1/2" X37" Table, (24) Position ATC, #BT-40 Spindle, Travels 34"-X, 17"-Y, 24.8"-Z,Coolant System W/ Skimmer, Full Enclosure and FANUC OM CNCControls, S/N 0041092
(New 1997) SuperMax #Max-2 CNC Vertical Machining Center W/ 16 1/2" X33" Table, (20) Position ATC, #BT-40 Spindle, Travels 24"-X, 16"-Y, X 19"-Z,Coolant System, Full Enclosure, and FANUC OM CNC Controls, S/N504005
(New 1989) Fadal #VMC-4020-HT CNC Vertical Machining Center, W/ 20" x48" Table, (20) Position ATC, #BT-40 Spindle, Travels 40"-X, 20"-Y, 20"-Z,Coolant System, Full Enclosure and Fadal 88 CNC Controls, S/N 8910692
(New 1988) SuperMax #MAX-1 CNC Vertical Machining Center W/ 13" x 36"Table, (16) Position ATC, #BT-40 Spindle, Traels 24"-X, 16"-Y, 16"-Z, CoolantSystem, Splash Guards and FANUC Om CNC Controls, S/N 809479
(New 1987) Hitachi-Seiki #VM-40 CNC Vertical Machining Center W/ 16" x30" Table, (20) Position ATC, #BT-40 Spindle, Tavels 22"-X, 16"-Y, 16"-Z,Coolant System, Full Enclosure, 6000 RPM and Seicos CNC Controls, S/NVM40212SC
(New 1984) Shizuoka #Millmaster-B-5V CNC Vertical Machining Center W/13" X 35" Table, (30) Position ATC, 5,000 RPM, #BT-40 Spindle, Travels 26"-X,16"-Y, 18"-Z, Coolant System and FANUC 6MB CNC Controls, S/N 64214
3.15" SPINDLE
HOLE
New1998
CNC LATHES
(New 1999) Okuma # 762S-BB"Crown" Big Bore CNC LatheW/ Kitagawa 10" HydraulicChuck, 21.65" Swing over Bed,15.75" Swing Over Cross-Slide,10.63" Max. Turning Diameter,Max. Turning Length 20.47",Spindle Bore 3.15", SpindleSpeeds 65-3500 RPM,Tooleye,(12) Position Turret, Tailstock,Chip Conveyor and Okuma#OSP-700L CNC Controls, S/N0756
C N C • T O O L R O O M • I N S P E C T I O N • P L A N T S U P P O R T 3
SALE DATE: TUESDAY, JULY 14, 10:30 AM (EDT)
HARRISON #M-350 ENGINE LATHE
EDWARDS #1440 ENGINE LATHE
New1996
COORDINATE MEASURINGMACHINE
(New 2005) Brown & Sharpe # TESA-Micro-Hite-3D CoordinateMeasuring Machine W/ 22" X 191/2" Table and #MH-3D controlsw/ Reflex Software, S/N 04110025
Brown & Sharpe #ValidatorCoordinate Measuring MachineW/ 18" X 24" Table, S/N 087200
MILLERS, CNC
(New 1996) SWI-TRAK #DPM CNCBed Type Miller W/ 10" X 50"Table, #40 Taper Spindle, 70-4200RPM, Power Draw Bar, Spray MistCoolant and TRAK-AGE-3 CNCControl, S/N 96-2420
(New 1996) Bridgeport 2 HP Series IVertical Miller W/ Power DrawBar, 9" X 48" Table, 12" Knee,Spray Mist Coolant and Proto-TRAK-MX2 CNC Control, S/N271545
VERTICAL MILLERS
Bridgeport 2 HP Series I VerticalMilling Machine W/ 9" X 48"Table, 12" Knee, and ACU-RITE IIIDRO, S/N 238274
Bridgeport 2 HP Series I VerticalMilling Machine W/ 9" X 42"Table, 12" Knee and ACU-RITE IIDRO, S/N 187784
(2) SuperMax #YCM 1 1/2 V VerticalMilling Machine W/ 9" X 42"Table, 12" Knee and ACU-RITE IIIDRO, S/N 80919550 & 80619192
Kearney & Trecker #10HP-2CKHeavy Duty Vertical Miller W/ 131/2" x 56" Table, #50 TaperSpindle, 15-1500 RPM and 10 HP,S/N 1-7375
HORIZONTAL MILLER
Milwaukee # 3H "Universal" HeavyDuty Horizontal Miller W/ 13 1/2" X64" Table, #50 Taper Spindle, 20-2000 RPM and Vertical MillingHead Attachment, S/N 9-5506
HITACHI-SEIKI #VM-40 CNC VERTICAL MACHININGCENTER
FanucOM
Control
SUPERMAX #MAX-2 CNC VERTICAL MACHINING CENTER
New1997
SHIZUOKA #MILLMASTER B-5V CNC VERTICALMACHINING CENTER
SUPERMAX #MAX-1 CNC VERTICAL MACHININGCENTER
S A L E D A T E : T U E S D A Y , J U L Y 1 4 , 1 0 : 3 0 A M ( E D T )4
SALE TO BE CONDUCTED LIVE ONSITE & WEBCAST
JIG GRINDERS
(New 1986) Moore #G-18 JigGrinder W/ 11" X 24" Table andSony DRO, S/N G-3477
Moore #3 Jig Grinder W/ 11" X 24"Table and Acu-Rite DRO, S/N G-249
Moore Tool Cabinet, MooreGrinding Heads, Moore Vise,Moore Strap Sets
JIG BORER
(New 1980) Moore #1 1/2 Jig BorerW/ 11" X 20" Table, S/N J-920
ENGINE LATHES
(New 1997) Harrison #M-350 EngineLathe W/ 17" X 40" Cap, #D-1-8Cam-Lock Spindle, TaperAttachment, 2.137" Spindle Hole,40-2200 RPM and FAGOR DRO,S/N 351515-1503
Edwards #1440 Engine Lathe W/ 14"X 40" Cap, #D-1-6 Cam-LockSpindle, 35-2000 RPM and Trav-A-Dial, S/N 6012
SURFACE GRINDERS, CNC
(New 1997) Harig #618 EZ-Surf CNCSurface Grinder, W/ Walker 6" x18" Magnetic Chuck andBridgeport 2-Axis ProgrammableControl S/N 165-EZ
SURFACE GRINDERS, HYDRAULIC
(New 1998) Okamoto ACC #12-24ST Hydraulic Surface GrinderW/ 12" X 24" Electro-MagneticChuck, Coolant System W/paper Filtration and SplashGuards, S/N 83153
Okamoto #ACCUGAR-124NHydraulic Surface Grinder W/ 12"X 24" Electro-Magnetic Chuck,Coolant System and Splash Guards S/N 6429
#BT-40 CNC TOOLHOLDERS
DO-ALL C-916A AUTOMATIC BANDSAW OVERVIEW OF RAW MATERIAL SEA CONTAINER STORAGE SHED
New1997
LikeNew
300+Available
BRIDGEPORT-HARIG #EZ-SURF CNC GRINDER
OKAMOTO #ACCUGAR-124NHYDRAULIC GRINDER
CLARK 2500 LB ELECTRIC FORKLIFT
NOVA VIBRATORY FINISH MACHINE
New1997
Very Low Hours
SAMPLE OF #BT-40 TOOLING & KURT VISES
(30) VISESAVAILABLE
(300) #BT-40 TOOLHOLDERS
C O M P L E T E L O T C A T A L O G & P H O T O S A T : W W W . T H O M A S A U C T I O N . C O M 5
TREMENDOUS AMOUNT OF NEW CARBIDE & HIGH SPEED CUTTING TOOLS
LARGE QUANTITY OF MACHINE ACCESSORIES LARGE QUANTITY OF INSPECTION TOOLING DUSTKOP DUST COLLECTOR
K & T MILWUAKEE HEAVY DUTYVERTICAL MILLER
BROWN & SHARPE #TESA 3-D COOR-DINATE MEASURING MACHINE
BRIDGEPORT2 HP MILLERW/ PROTO-TRAK CNCCONTROL
SUPERMAXMILLINGMACHINE
BRIDGEPORT 2 HP SERIESI MILLING MACHINE
SUNNEN HONING MACHINE
LikeNew
New1996
New2005
1 of 2
3-Axis
SURFACE GRINDERS
(New 2005) Harig #612 SurfaceGrinder W/ Walker MagneticChuck, S/N 21206
Accu-Finish #AE-841 CarbideGrinder
(New 2004) Harig #612 SurfaceGrinder W/ Walker MagneticChuck, S/N 20311
Kalamazoo 6" Heavy Duty BeltGrinder
Covel 6" X 18" Surface GrinderW/Magnetic Chuck, S/N 10-780
(3) Dayton 8" Double End GrindersHarig #Super 612 Surface Grinder
W/ Magnetic Chuck S/N 13910Rockwell 6" Double End Grinder
SAWS
(New 1997) Do-All #C-916A"Automatic" Horizontal BandsawW/ 9" X 16" Cap, 1" Blade, Auto-Feed Conveyor, Coolant Systemand Digital Counter Controls, S/N528-97277
(New 1982) W.F. Wells #W-9Horizontal Bandsaw W/ 1" Blade,Hydraulic Controls and Coolant,S/N 823779
MOORE 1 1/2 JIG BORER MOORE #3 JIG GRINDER
HONING MACHINE
Sunnen #MBB-1660 HoningMachine, S/N 83221
Large Assortment ofSunnen Tooling
AIR COMPRESSORS &DRYER
(New 1997) Ingersoll Rand#SSR-EP15SE AirCompressor 15 HP, S/NKE4370U97083
Ingersoll Rand #15H-SP AirCompressor W/ NewTank, 15 HP, S/N K0117-V84A
Zeks #Heat Sink Tru CyclingAir Dryer
OPTICAL COMPARATOR
Mitutoyo #PH-350 OpticalComparator W/ 14"Screen, Surf Illumination,6" X 16" MicrometerTable, 10X Lens, S/N
New1980
S A L E T O B E C O N D U C T E D L I V E O N S I T E & W E B C A S T6
LARGE QUANTITIES OF LIKE NEW TOOLING & MACHINE ACCESSORIES
FORKLIFT
Clark #TM-15S Electric Forklift W/2500 Lb Cap, 170" Lift Height,Triple Mast, Solid Tires and BatteryCharger, S/N TM127-0089-4900FA
FIE #R Hardness Tester S/N 2196(3) Starrett 24" X 36" Pink Granite
Surface Plates W/ Cart48" X 70" Granite Surface PlateLarge Quantity of Mitutoyo &
Brown & Sharpe Intra-MikesSunnen, Mitutoyo, Gage Blocks,
Micrometers, Bore Gages, PinGages, Ring Gages, MitutoyoSurf Indicator, Height Gages,Deltronic Pin Gages, Etc.
VISES
(30) 6" Kurt #3600V Milling Vises8" Kurt Machine Vise
TOOLING
A & B Tool Motorized 5C IndexerYUASA #550-008 8" Super IndexerCushman 8" Air Flash Indexer(300+) #BT-40 CNC Toolholders(6) Tool Setters, Flex Collets,
Carbide Endmills & Drills, BoringBars, Carbide Inserts, AlorisToolposts & Holders, BridgeportRight Angle Heads, MillingCutters, R-8 Collets, Radius AngleWheel Dressers
RAW MATERIAL
Large Assortment of Raw Material,Aluminum, Steel and StainlessSteel W/ Racks
PLANT SUPPORT
Nova #1000 Vibratory FinishMachine-(2) Dustkop Dust Collectors(New 2005)- Taft-Pierce 10" X 24"Bench Center- Lassey TappingMachine-Baystate Tapping Machine-(6) 18" X 24" Rock of Ages 2-LedgeGranite Surface Plates- Norco 20 TonHydarulic Shop Press- Evansville #1Arbor Press- TECO Machine StrapSets-Darex Drill Sharpener S/N 53575Rockwell 1" Belt Sander W/ Cart-Industrial Magnetics Demagnitizer-Bridgeport Sine Table-(5) Basnik 4-TierHeavy Duty Parts Carts- RotaryTables-Shelving- Rack Shelving-Carts- (6) HUOT CNC Tool Carts &Racks- (15) Wood Top Work Benches-22' Sea Container Storage Shed-Hand Truck- Large Quantity ofRubber Shop Mats
ZEKS #HEAT SINK AIR DRYER KALAMAZOO 6" BELT SANDER INGERSOLL-RAND 15 HP AIRCOMPRESSOR
INGERSOLL-RAND 15 HP AIRCOMPRESSOR
NORCO HYDRAULIC SHOPPRESS
MOORE TOOLMAKERS CABI-NET
PORTABLE PARTS CART 5AVAILABLE
SWI-TRAK #DPM CNC MILLINGMACHINE
HARDNESS TESTERVIEW OF INSPECTIONTOOLING
New1997
NewTank 2007
New1996 3-Axis
MAJOR ONSITE & WEBCAST AUCTIONTO BE CONDUCTED LIVE ONSITE AND WEBCAST
AUCTION SITEMutual Precision, Inc.,
100 Doty CircleWest Springfield, Massachusetts
SALE DATETuesday, July 14, 10:30 AM (EDT)
INSPECTIONMonday, July 13, 9 -4 PM (EDT)
REMOVAL: No Later Than Friday, July 24
BUYER’S PREMIUM 12.5% Onsite & 15.5 % Webcast
REMOVAL DATE: PLEASE NOTE ALL EQUIPMENT MUST BE REMOVED NO LATER THAN JULY 24TH , NO EXCEPTIONS 7
AUCTION INFORMATION
THOMAS INDUSTRIES 2414 Boston Post RoadGuilford, CT 06437-2310
(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com
THOMAS INDUSTRIESAPPRAISAL DIVISIONAccurate appraisals supported by over 56 years of conducting worldwide auctions
and liquidations.
Call (203) 458-0709 for a confidential appraisal
of your assets. One piece of equipment or an entire plant.
UPCOMING AUCTIONAUGUST 4TH
LATE MODEL AMADA FABRICATING EQUIPMENT
SMTC CORP. FRANKLIN, MASS.
150,000 SF FACILITY• AMADA CNC TURRET PUNCH
#EMK-3610-NT (NEW 2008)
• AMADA CNC TURRET PUNCH#PEGA-358-S (NEW 2000)
• AMADA CNC LASER#LC-1212-A2, 1500 WATT
• (5) AMADA 8-AXIS CNCPRESS BRAKES (NEW 2000)
• INSERTERS • TIME SAVERS • TOOL ROOM • PLANT SUPPORT • OVER 1200 LOTS
WEBCAST BIDDING AVAILABLE:
Onsite Registration – Payment TermsIn order to obtain a bid paddle a$100.00 refundable fee is due at timeof registration. Payment terms: A 25%deposit due day of sale, payment in fullwithin 24 hours, by cash, certifiedcheck or wire transfer (we do notaccept credit cards). Company orpersonal checks will only be acceptedif accompanied by a bank letter, sub-ject to Thomas’ approval guaranteeingunqualified payment to Auctioneer.Any and all checks must be drawn ona United States Bank in US Funds. Allpurchases are subject to applicablefederal, state and local taxes unlessauctioneer is provided with a validsales tax exemption certificate.
Sales & Use Tax:All purchases are subject to applica-ble federal, state and local taxesunless auctioneer is provided with avalid sales tax exemption certificate.
Proxy BidsIf you are unable to participate in thissale Proxy Bids are accepted. Proxybids may be submitted online directlyfrom the lot catalog or call (203) 458-0709 for a proxy bid form.
Webcast Registration - Payment Terms All Internet bidders wishing to bid off-site will be required to register withwww.bidspotter.com. All successfulinternet bidders will be invoiced within24-hours following the auction sale byemail, with payment instructions.Payment is due in full within 48-hoursof receipt of your emailed invoice , bycash, certified check or wire transfer(we do not accept credit cards).
Representation of EquipmentAll items are sold As Is - Where Is withall faults. The Auctioneer expressly dis-claims any warranty of merchantabili-ty or fitness for a particular purpose. Itis the bidders’ sole responsibility toexamine or inspect items prior toplacing their bids.
Disclaimer: Please Note Items OfferedMay Be Subject To Prior Sale.Auctioneer is not responsible for errors,omissions, additions or deletions.Items offered may not necessarily besold as described and/or pho-tographed. Buyers should verify allaspects of their potential purchasesduring inspection as all items offeredwill be sold “as is, where is” with allfaults. Please check with the auction-eer’s office for additions or deletions.
FORWARDING SERVICE REQUESTED
PRESORTED FIRSTCLASS MAIL
U.S. POSTAGE
PAIDPermit No. 80
Milford, CT
THOMAS INDUSTRIES 2414 Boston Post RoadGuilford, CT 06437-2310
(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com
Under Management of:
MAJOR ONSITE & WEBCAST AUCTION
Mutual Precision, Inc.FEATURING: (11) CNC MACHINING CENTERS &TURNING CENTERS • TOOLROOM• INSPECTION • PLANT SUPPORTSALE DATE Tuesday, July 14, 10:30 AM (EDT)
INSPECTION Monday, July 13, 9-4 PM (EDT)
AUCTION SITEMutual Precision, Inc.,100 Doty CircleWest Springfield, Massachusetts
MUTUAL PRECISION BUILDING AVAILABLE FOR SALE
CONTACT: Kevin M. Jennings Jennings Real Estate Services, Inc.73 Chestnut Street, Springfield, MA 01103
413.731.7770 (ph)