Welcome To
My Presentation
Topic:Topic:
Manufacturing Manufacturing Sequence Of Sequence Of
GarmentsGarments
Manufacturing Sequence of Manufacturing Sequence of GarmentsGarments
Operation
Idea Generation
Grading
Production Pattern
Sample Making
Pattern Design
Design/Sketch
Fabric Spreading
Marker Making
Lay Planning
Cutting
Numbering
sewing
Printing/Embroidery
Washing/DyeingFinishing
Packing Final Inspection
Delivery
Idea Generationeneration
►The process by which new DESIGNS are deliberately produced
►Fashion designers are assigned for this process
►Also Idea generation Trip to get idea
Sketch
Sketch of a particular garment including its design features is essential on paper
Sample garment are produced and verified with its sketch
Pattern design
Hard paper copy of each component of a garment of exact size and shape
Sample Making
Patterns are used to cut fabric and cut components are assembled to make a sample garment
Production Pattern
Pattern of the approved sample garments are used to make production pattern
Minor modification may done on production pattern if buyer have any advice.
Gradding
Stepwise increase or decrease of a master pattern
Could be done manually or with the help of software
Marker Making
All the pattern pieces for the required sizes are arranged in the paper in such a way so that required number of different size garments may be produced with minimum fabric wastage
Spreading
Process of arranging fabric on the cutting table to cut
Could be done manually or mechanically
Cutting
Normally straight knife cutting machine is used to cut out the garment component as per exact dimension of the pattern
Care must be taken to avoid cutting defects
Printing and embroidery
Both printing and embroidery requires flat form of the fabric for processing
Sewing
Cut pieces of fabric is assembled in this process
Finishing
After sewing, all garments are normally go through thread sucking machine to remove floating dirt, measured and ironed/pressed to remove unwanted crease and to improve smoothness
Packing
Finished garments are folded as per buyers instruction, inserted into the poly bags and cartooned as advised by the buyer
Inspection (Final)
Final random inspection (FRI) is usually done by the buyer or the representative of buyer
Thanks Thanks All All