safe · timeless · beautiful
155
markilux
markilux1700
stretch
markilux1700
Specifi -cation
markiluxcollection
markilux1710
markilux1710
stretch
markiluxpergola 110
markilux8850
markiluxpergola 210
Technical Information
Optional Accessories
markiluxsyncra 2 fi x
/ uno fi x with
folding-armAwningsmarkilux
syncra 2 fi x/ uno fi x
withpergola
110 / 210
markilux8800 /
8800 zip
markilux889 /
889 zip
markilux869 /
869 zip
Order Forms
Elegant and delicately contoured – the vertical, tensioned blind for large areas – optionally with zip system to close the cover gap and provide extra stability in windy conditions.
markilux 869 / 869 zip
156
Additional featuresTechnical highlightsDesign
markilux 869 / 869 zip
• hard-wired motor operation (optionally with automatic weather controls) for straight-forward and easy operation
• an easily installed, radio control light and wind sensor guaran-tees comfort and a degree of safety – even in your absence
• radio-controlled motor withradio remote control for easeof use
• zip system – attractive completely closed appearance – the zip system does away with the annoying gap between the blind cover and the tracks. When completely extended the front profi l sits fl ush with the end of the guide tracks.
• markilux PVC window for blinds with covers in acrylic, sunvas or sunsilk fabric
• special vario-belts ensure optimum cover tension when the awning is completely extended
• the awning cover is guided along sturdy, aluminium guide rails
• the 85 mm roller tube ensures the highest rigidity and the best possible cover winding characteristics even at the largest sizes
• width or drop up to 6 metres
• the awning is completely pre-assembled and tested in the factory – brackets with clip-on mechanism for easy, problem-free installation – individual, made-to-measure manufacture, so that the shading system fi ts your house perfectly
• Beautifully crafted, teardrop-shaped aluminium cassette only 141mm in height
• the compact, rounded profi les make it discreet and unobtrusive
• when retracted the cover is protected from the weather by the cassette, which encloses it completely
• stand-off fi xture from the façade. This embellishes the building still further
Elegant and delicately contoured – the vertical, tensioned blind for large areas – optionally with zip system to close the cover gap and provide extra stability in windy conditions.
markilux 869 / 869 zip
unit with zip system (optional)standard unit
rated to wind resistance class 2 or
3 (depends on the blind size)
(corresponds to Beaufort 5 or 6)
157
Standard specifi cation Standard frame colours Optional accessories
www.markilux.com
traffi c white - RAL 9016
metallic aluminium - RAL 9006
grey brown - similar to RAL 8019
markilux1700
stretch
markilux1700
Specifi -cation
markiluxcollection
markilux1710
markilux1710
stretch
markiluxpergola 110
markilux8850
markiluxpergola 210
Technical Information
Optional Accessories
markiluxsyncra 2 fi x
/ uno fi x with
folding-armAwningsmarkilux
syncra 2 fi x/ uno fi x
withpergola
110 / 210
markilux8800 /
8800 zip
markilux889 /
889 zip
markilux869 /
869 zip
Order Forms
manual operation with stainless steel winding handle
bonded awning cover
sunsilk snc fabric
sunsilk snc signature fabric
acrylic fabric 34
widely woven acrylic fabric
perfotex fabric
transolair fabric
markilux 869 / 869 zip
hard-wired or radio-controlled motor with remote control
zip system
sun sensor and wind sensor
PVC window
sunvas fabric
non-standard powder-coated fi nish
fi xture type 20 with decorative cap assembly for track bracket (optional)
reveal fi xture
fi xture type 10with fl at track brackets
side view with winding handle (standard), manual operation
units with the optional zip system have no annoying gap between the cover and the guide track. When completely extended the front profi l sits fl ush with the end of the guide tracks.
side view with zip system (optional)
completely extended the front profi l sits fl ush with the end of the guide tracks.
Dimensions and configuration options
158
markilux 869 / 869 zip
Operationmanual operation with stainless steel winding handle ●manual operation; handle with bayonet fitting –manual operation from inside the building –manual operation from the rear –motor ○radio-controlled motor ○*
Coverssunsilk snc (fabric series 324xx/329xx) ●1
sunsilk snc signature (fabric series 369xx) ●1
acrylic 34 (fabric series 341xx-347xx) ●1
sunvas (fabric series 315xx) ○widely woven acrylic (fabric series 349xx) ●2
sunsilk perla FR (fabric series 374xx/379xx) ○3
perfotex (fabric series 333xx) ●3
transolair (fabric series 339xx) ●4
Soltis 92 ○5
Miscellaneouszip system ○sun sensor and wind sensor ○cover profiles for gap between side rails and cover ○6
wedge-in accro bars –sundrive –markilux PVC windows ○7
Coupled unitscoupled unit, 2 fields –coupled unit, 3 fields –
* Colours similar to the RAL chart - these may differ slightly from those depicted in both hue and finish.
The width of the awning cover is always less than the width of the awning.
The tolerance in the projection is + 40 mm / - 40 mm.
A standard gearbox is operated from outside the building using a stainless steel winding handle (handle lengths 110, 140, 160, 180 or 220 cm).
In the case of manual operation it takes approximately 18 turns per metre of overall unit height to extend the system.
In the case of motor operation the awning will take approx. 14 seconds per metre to extend.
N.B.! If the motor is used continuously it will stop automatically after 3 to 4 minutes to prevent overheating.
In the case of a bank of awnings operating simultaneously, the same speed of rotation of the motors cannot be guaranteed because of the internal tolerances of the motors.
Coupled blinds are not available in this model.
= available, 3 brackets per track
= available, 3 brackets per guide track, optionally with zip system
= available, 2 brackets per guide track, optionally with zip system1) this size meets wind resistance class 2, all sizes that have not been highlighted in this way meet wind resistance class 3.
2) units with zip system are only available with motor (for a surcharge)
fixture / order width200 250 300 350 400 450 500 550 600 minimum width
151-200 201-250 251-300 301-350 351-400 401-450 451-500 501-550 551-600
overall width, motor operation + 5
hard-wiredmotor
radio-controlled
motor
overall width of manual operation + 6
overall width, zip system(manual/motorised operation) + 4.8
unit
heig
ht
1502)
65 77
2002)
2502) 1)
3002) 1) 1) 1)
3502) 1) 1) 1) 1) 1)
4001) 2)
4501)
5001)
5501)
6001)
dimensions in cm
●4 = cover seamless, from a fixture width of 261 cm and from a unit height of 270 cm with horizontal seam(s)
○5 = cover seamless, from a fixture width of 186 cm and from a unit height of 195 cm with horizontal seam(s), up to a maximum unit height of 450 cm
○6 = not available for awnings with zip system○7 = only possible with covers made of acrylic (not widely woven) or sunsilk
fabric, see section “Optional Accessories”; not possible on units with zip system
● = standard specification○ = optional accessories– = not available○* = radio-controlled motor using 433 MHz technology●1 = up to a unit height of 450 cm●2 = cover seamless up to a fixture width of 400 cm; from a fixture width of
329 cm and from a unit height of 338 cm with horizontal seam(s)●3 = up to a maximum unit of 450 cm; not available for units with zip system○3 up to a unit height of 450 cm
= available, 4 brackets per track
Frame colourstraffic white - RAL 9016 ●metallic aluminium - RAL 9006 ●grey brown - similar to RAL 8019 ●non-standard powder-coated finish ○
Housing tolerances / Awning cover dimensions Width drophousing tolerance +5 / -10
awning cover width = fixture width less
hard-wired zip system80
motor upon request90
manual operation
blind cover length = unit height less
145*/155**
hard-wired50
zip system
* for a drop up to 2000 mm ** for a drop from 2001 mm dimensions in mm
Fixtures, fittings and accessories
. = use RAL no. (see “frame colours” chapter)
159
markilux1700
stretch
markilux1700
Specifi-cation
markiluxcollection
markilux1710
markilux1710
stretch
markiluxpergola 110
markilux8850
markiluxpergola 210
Technical Information
Optional Accessories
markiluxsyncra 2 fix
/ uno fix with
folding-armAwningsmarkilux
syncra 2 fix/ uno fix
withpergola
110 / 210
markilux8800 /
8800 zip
markilux889 /
889 zip
markilux869 /
869 zip
Order Forms
markilux 869 / 869 zip
Flat track bracket
33
80 246,50 Fixture type 10, 15
Flat track bracketDouble flat track bracket Double flat track bracket
standard without zip system
for awnings with zip system
2 single units 2 single units
78548. 78671. 73101.
Track bracket, stand-off fixtureFixture dimensions of track brackets with adjustable head
Universal track bracket fixture type 20Track bracket with adjustable head
height 80 mm height 80 mm
78542. 78451.85
11040
8,5
Double track bracket with adjustable head
Double track bracket with adjustable head
fixture type 21Track bracket with adjustable head
height 80 mm height 80 mm height 100 mm
for awnings with zip system2 single units
standard without zip system: 2 single units
73102. 78654. 78538.Universal track bracket Universal track bracket fixture type 22
Track bracket with adjustable head
height 100 mm height 140 - 500 mm height 140 mm
78543. 78545. 78539.Double track bracket with adjustable head
85
11040
8,5
Double track bracket with adjustable head
Double track bracket with adjustable head
height 100 mm height 100 mm height 140 mm
standard without zip system: 2 single units
for awnings with zip system2 single units
standard without zip system: 2 single units
78658. 73103. 78683.
85
11040
8,5
Double track bracket with adjustable head
height 140 mm
for awnings with zip system2 single units73104.
Fixtures, fittings and accessories
. = use RAL no. (see “frame colours” chapter)
160
markilux 869 / 869 zip
Accessoriesfixture type 15Additional angle bracket, bearing/gearbox/motor side
50 x 50 x 80 mm
(fixture between beams, walls etc.)
please order additional accessories 787211!
fixture type 15Accessoriestwo angled brackets 78719.
Decorative cap assembly for track bracket
for:78081., 78086., 78094., 78247., 78451., 78538., 78543., 78454., 78663.
78719. 787211. 76603.Decorative cap assembly for track bracket
for:78082., 78087., 78095., 78105., 78107., 78108., 78251., 78539., 78540., 78545., 78665., 78664.,78685.
78999.
Gap cover profile
44
70
79900.
Adhesive plate for gap cover profile 78999.
76604.Reducing bolt assemblyM 10 – M 6 / SW 13
30 mm length
(see the section “Technical Information” in the Vertical Blinds & Awnings Manual)753211
Fixture combinations
161
All brackets incur a surcharge
Individual bracket combinations – see “Fixtures, fittings and accessories”.Make sure you note the minimum quantity required for the width and unit height you have ordered!
Fixture type
markilux1700
stretch
markilux1700
Specifi-cation
markiluxcollection
markilux1710
markilux1710
stretch
markiluxpergola 110
markilux8850
markiluxpergola 210
Technical Information
Optional Accessories
markiluxsyncra 2 fix
/ uno fix with
folding-armAwningsmarkilux
syncra 2 fix/ uno fix
withpergola
110 / 210
markilux8800 /
8800 zip
markilux889 /
889 zip
markilux869 /
869 zip
Order Forms
markilux 869 / 869 zip
hard-wired with zip system
10 78548. 78548.
• from a drop of 301 cm, 3 brackets per track• from a drop of 501 cm, 4 brackets per track
15 78719.78548. 78719.78548.
20 78451.
80
78451.
85
21 78538.
100
78538.
105
22 78539.
140
78539.
145
Header
162
measurements in mm
markilux 869 / 869 zip
measurements in mm
* = not required for awnings with the zip system78999. = gap cover profile79900. = adhesive plate for gap cover profile 78999.
78999.
78999.
79900.
Fitting of the gap cover profile* to block the gap between cover and tracks (optional)
How to install the markilux xxx
163
measurements in mm
measurements in mm
markilux1700
stretch
markilux1700
Specifi-cation
markiluxcollection
markilux1710
markilux1710
stretch
markiluxpergola 110
markilux8850
markiluxpergola 210
Technical Information
Optional Accessories
markiluxsyncra 2 fix
/ uno fix with
folding-armAwningsmarkilux
syncra 2 fix/ uno fix
withpergola
110 / 210
markilux8800 /
8800 zip
markilux889 /
889 zip
markilux869 /
869 zip
Order Forms
markilux 869 / 869 zip
AS = operation sideM = overall awning widthMA = awning fixture width = fixture width = order widthH = dropTB = cover widthAH = unit height = order heightIW = reveal width[…] = dimensions in the case of manual operation
140
max
. 300
min
. 200
190
AH
max
. 800
min
. 100
75H
3636
IW
M = IW - 30
252514
5TB
MA = M - 50
AS
[35]
Dimension table fixture combination 15
140
max
. 300
min
. 200
190
AH
max
. 800
min
. 100
130
75H
3636
M
2525 TB
145
MA = M - 50
AS
[35]
Dimension table fixture combination 10
How to install the markilux 869 (standard)
How to install the markilux xxx
164
measurements in mm
measurements in mm
markilux 869 / 869 zip
140
max
. 300
min
. 170
190
AH
max
. 800
min
. 100
193
75H
3636
M
25 25
145
TB
MA = M - 50
AS
[35]
Dimension table fixture combination 20
How to install the markilux 869 (standard)
AS = operation sideM = overall awning widthMA = awning fixture width = fixture width = order widthH = dropAH = unit height = order height[…] = dimensions in the case of manual operationP = fixture typeHT = bracketHH = fixture bracket heightT = depthAM 1 = installation dimensions, as seen from above
40
min
. AM
1m
ax. 3
00
HH
T
P: 20, 21, 22 P: 10
190
40
12,
5 1
10
8
85
12,
5
MA
40
6
MA
80
15
50
15
Face fixture
P 10 20 21 22HT 78548. 78451. 78538. 78539.HH 15 mm 80 mm 100 mm 140 mmT 128 mm 193 mm 213 mm 253 mm
AM 1 210 190 190 190
How to install the markilux xxx
165
measurements in mm
measurements in mm
markilux1700
stretch
markilux1700
Specifi-cation
markiluxcollection
markilux1710
markilux1710
stretch
markiluxpergola 110
markilux8850
markiluxpergola 210
Technical Information
Optional Accessories
markiluxsyncra 2 fix
/ uno fix with
folding-armAwningsmarkilux
syncra 2 fix/ uno fix
withpergola
110 / 210
markilux8800 /
8800 zip
markilux889 /
889 zip
markilux869 /
869 zip
Order Forms
markilux 869 / 869 zip
141
190
128~1
0
max
. 170
min. 210
Reveal fixture, manual operation
141
190
128
~10
max
. 170
min. 150
Reveal fixture motor operation
How to install the markilux 869 (standard)
How to install the markilux xxx
166
measurements in mm
markilux 869 / 869 zip
How to install the markilux 869 (standard)
Cable exit point in the case of motor-driven units
109
30
How to install the markilux xxx
167
measurements in mm
measurements in mm
markilux1700
stretch
markilux1700
Specifi-cation
markiluxcollection
markilux1710
markilux1710
stretch
markiluxpergola 110
markilux8850
markiluxpergola 210
Technical Information
Optional Accessories
markiluxsyncra 2 fix
/ uno fix with
folding-armAwningsmarkilux
syncra 2 fix/ uno fix
withpergola
110 / 210
markilux8800 /
8800 zip
markilux889 /
889 zip
markilux869 /
869 zip
Order Forms
markilux 869 / 869 zip
AS = operation sideM = overall awning widthMA = awning fixture width = fixture width = order widthBA = width between fixing pointsAH = unit height = order heightH = dropSF = visible cover lengthIW = reveal width
IW
M = IW - 30
MA = M - 48
SF 48 48
AH
= H
min
. 200
max
. 300
max
. 800
130
,5
AH
= H
186
AS
min
. 100
Dimension table fixture combination 15
AH
= H
min
. 100
max
. 800
min
. 200
max
. 300 130
,5
126
146 M
MA = BA = M - 48 24 24
AH
= H
48 SF 48
AS
186
Dimension table fixture combination 10
How to install the markilux 869 with zip system (optional)
How to install the markilux xxx
168
measurements in mm
measurements in mm
markilux 869 / 869 zip
211
126 MA = BA = M - 48
M
24 24
AH
= H
130
,5
min
. 200
max
. 300
min
. 100
max
. 800
AH
= H
48 SF 48
186
AS
Dimension table fixture combination 20
How to install the markilux 869 with zip system (optional)
186
T
min
. AM
1m
ax. 3
00
48 HH
HT
40 40
12,
5
15
P: 10P: 20, 21, 22
110
1
2,5
85
MA
MA
8 6
80
15
50
Face fixture
AS = operation sideM = overall awning widthMA = awning fixture width = fixture width = order widthBA = width between fixing pointsAH = unit height = order heightH = dropSF = visible cover lengthP = fixture typeHT = bracketHH = fixture bracket heightT = depthAM 1 = installation dimensions, as seen from above
P 10 20 21 22HT 78548. 78451. 78538. 78539.HH 20 mm 85 mm 105 mm 145 mmT 146 mm 211 mm 231 mm 271 mm
AM 1 206 186 186 186
How to install the markilux xxx
169
measurements in mm
measurements in mm
markilux1700
stretch
markilux1700
Specifi-cation
markiluxcollection
markilux1710
markilux1710
stretch
markiluxpergola 110
markilux8850
markiluxpergola 210
Technical Information
Optional Accessories
markiluxsyncra 2 fix
/ uno fix with
folding-armAwningsmarkilux
syncra 2 fix/ uno fix
withpergola
110 / 210
markilux8800 /
8800 zip
markilux889 /
889 zip
markilux869 /
869 zip
Order Forms
markilux 869 / 869 zip
min. 150
146
10
max
. 170
130
,5
186
Reveal fixture motor operation
How to install the markilux 869 with zip system (optional)
Cable exit point in the case of motor-driven units
13,5
29
9