PARTS SEPARATORKral11l'rllldustril's Inc., Copia~ul', N. Y.
Rotary screen separators from Kramer Industriesoffer complete, rapid separation of parts and media. The openings cannot be blinded by media orparts as would a flat-bed screen. Parts are turnedover to spill out all media. Three sizes are available: the TRS-1 for up to 6 ft:l vibrators; the TRS-2for large vibrators or tumblers; and the TRS-2Dtwo-stage separator for removing fines and separating at the same time.
Circle 159 on reader information card
SMALL FINISHING SYSTDISAE. Aubin Co., Marlborou~h, Conn.
Aubin's Ty-nee Power Units are the quiet. versatile solution to small parts finishing needs. Thevarying shapes and sizes of the barrels and baskets allow for a wide range of operations includingcleaning, deburring, separating. stripping, polishing. or coating. Both Model 510 and 1600 aredriven by aIlS V/60 Hz electric motor. Model 510weighs only 6 lb with a load capacity of 5 lb. Model1600 weighs 15lb and has a load capacity of20 lb.Each model requires less than 2 ft2 of bench space.
Circle 160 on reader information card
MASS PlNISHINGTurbo-Finish Process Laboratories, Bartlett. N.H.
Turbo-Abrasive Machining and Turbo-PolishingProcesses and Equipment can be used to automatedeburring and edge contour processes on manytypes of rotating components. The process is characterized by very rapid cycle times and the abilityto develop sophisticated edge and surface finisheswith a minimum of direct labor and is especiallywell suited to single-piece continuous-flow operations.
Circle 161 on reader information card
December 1999 25