MH 201, 203, 205Classroom Technology
University of Dayton Information TechnologyClassroom Support
Data Projector Controls
Press “PROJ. ON” to power on projector. Press “PROJ. OFF” to Power off projector
Pressing “AUDIO MUTE” turns off the sound until pressed again. Pressing “PROJ. MUTE” blanks the display until pressed again
Select what SOURCE (1 -8) to display. Green LED light signifies what SOURCE is selected
POWER
Source Select
MUTE Audio
Press the ▲ to increase volume. Press ▼ to decrease volume. The more LEDs lit, the louder the volume
DVD / VHS / CATV Controls
DVD/VHS Player can be found below podium
Select MENU to bring up the DVD main menu. Select ENTER to commit a selection on the DVD’s menu
Use directional buttons ▲►▼◄ to navigate through DVD menus
Select VCR or DVD in order to send the correct commands to the DVD/VCR.
Source Select
Source Control
Cable
• In VCR MODE ONLY select “Channel UP” or “Channel Down” to change cable channels
DVD Menu
DVD Menu
Make sure to select the proper input first (DVD/VCR) to display to the projector
Additional Input
For assistance please contact Technology Support Services at 229-3888.
USB ports are connected to the podium PC
Additional VGA input can be used to connect a laptop. Make sure to select the appropriate source (Laptop) on the control panel to display to the projector.
Data port for hardline internet connection
POWERPress grey power button
LIGHT• Move switch to left to
light subject• Move switch to right to
turn off light
LED Color Indicates Status
GREEN Normal
RED Standby Press power button to activate
ORANGE Incorrect input
Switch input from TV to VGA or
contact support for assistance
ZOOM +/-Press to increase or
decrease image of subject
AUTO FOCUSPress and lens automatically
adjusts for best image of subject
Document Camera
PC Login
Login with your UD Novell username in password. If Novell is down you can click on “Computer Only Login” and use the username: faculty and password: (none, leave blank)
Classrooms Are Shared SpacesSo please…
• Do not store sensitive data on Classroom PCs • Log off of Classroom PCs after use (Do not shut
down)• Power off projector(s)• Remember any flash drives, belongings
For assistance please contact Technology Support Services at 229-3888.