$3.00
470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®MMiiddwweessttEEddiittiioonn
Currently, “D” Construction has between 65 and 90 people on site everyday,depending on how many trucks are running on the Union Pacific Railroad job.
Numerous cranes are used during the rehabilita-tion of approximately 20 bridges along the 5.5 mi.(8.8 km) stretch of Highway 172.
December 122009
Vol. XVI • No.25
By Peter SuanlarmCEG ASSOCIATE EDITOR
Union Pacific Railroad covers 23 states in the western two-thirds of the country. So,when any work is done at one of the company’s rail yards, the project tends to be justas expansive.
Union Pacific Railroad tapped Illinois-based “D” Construction as subcontractor forRagnar Benson to work on the 800,000-sq.-yd. (668,900 sq m) intermodular project at
Workin’on the Rail Yard…
‘D’Construction SteamsAhead for Union Pacific
Are you confused about new and con-tinually changing standards?
Would you like to find ways to avoidpesky citations?
CEG Productions has new seminarslined up at both the fourth annual ChicagoConstruction Expo and the inauguralMidwest Construction Expo.
Due to last year’s success, The ChicagoConstruction Expo at the RenaissanceSchaumburg Convention Center inSchaumburg, Ill., will feature new semi-nars to address industry-related problemsand more Feb. 24 and 25.
Presenters and educators also have
Chicago, Midwest Expos toOffer Numerous Seminars
By Dorinda Anderson CEG CORRESPONDENT
Construction on the first half of a 5.5 mi. (8.8 km)stretch of roadway that will ease traffic issues for a futureproject was completed this fall in time for the Green BayPackers football season.
There was potential to complete both halves of thisGreen Bay, Wis., area Department of Transportation proj-ect in one year, but there was no way to know whatMother Nature would dish out, and the possibility ofmajor delays to weather could have made it difficult tofinish the project in one year, so it was decided that thework would be separated into two seasons, explainedKristin Van Hout, project leader of construction engi-
First Half of Wis.’sHighway 172 WrapsUp Near Green Bay
AAGGCC ooff MMiinnnn.. HHoollddss AAnnnnuuaallHHoolliiddaayy RReecceeppttiioonn……1122
DDiiggiittaall EEddiittiioonnss AAvvaaiillaabbllee aattccoonnssttrruuccttiioonneeqquuiippmmeennttgguuiiddee..ccoomm
$3.00
470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®MidwestEdition
The first dirt moved by the new Komatsu PC200LC-8 hybrid excavatoroccurred on the $6.3 billion Illinois Tollway reconstruction project.
November 282009
Vol. XVI • No.24
By Peter SuanlarmCEG ASSOCIATE EDITOR
The expansive Illinois Tollway’s recon-struction, rehabilitation and wideningproject is part of the $6.3 billionCongestion-Relief Program.
By the end of 2009, the Illinois Tollwaywill complete nearly $3 billion in work toreconstruct/rehabilitate and widen about120 mi. (193 km) of roadway across the286-mi. system.
However, one segment of the 286 mi.
Montemayor Tests OutNew Hybrid on I-294Job
By Lori Lovely CEG CORRESPONDENT
Sanitation District 1 (SD1) ofNorthern Kentucky broke ground inSeptember on a 6-mi.-long (9.6 km)tunnel intended to convey sewageacross western Boone County to a newtreatment plant on the banks of theOhio River. The gravity sewer projectwill route flow to a new 20 million gal-lon-per-day Western RegionalWastewater Reclamation Facility.When completed, ultimate peak hourlyflow can reach as high as 177 milliongal. per day (gpd), with average dailyflow expected to initially be more in therealm of 10 million gpd.
As Jeff Olsen, vice president of HDREngineering and project manager ofthis job, explained, the project will pro-vide relief for an overburdened collec-tion and treatment system and can beused to store up to 14 million gallons ofexcess water after heavy rains.
“There’s a significant wet weathercomponent” to this sanitary sewer, heexplained, adding that it is designed toaccommodate wet weather issues andalleviate the burden on the Dry Creektreatment plant in Kenton County.
Other benefits include relief to exist-ing interceptor sewers, with addedcapacity for future growth; operationalsimplicity, requiring minimal mainte-
Kentucky Digs Deep on $109M Tunnel Project
The inaugural Midwest Construction Expo will beheld at the Minneapolis Convention Center on Thursdayand Friday, March 18 and 19, 2010. Show hours are 9:30a.m. to 4 p.m. both days, and admission is free.
More than 100 exhibits are planned, featuring the lat-est makes and models of construction equipment, as wellas trucks, trailers, attachments, contractor supplies andall the ancillary products and services, such as finance,bonding, insurance, and more.
Several of the area’s top equipment dealers havealready committed to the show, including Ziegler Cat,Lano Equipment, St. Joseph Equipment, RoadMachinery & Supplies, RDO and Trenchers Plus.
In addition to the exhibits the show will be an out-standing educational opportunity for attendees. Many ofthe industry’s leading associations are working closelywith CEG Productions, the show’s producers, to devel-op programs that will help contractors do their jobs bet-ter, faster, safer and more efficiently.
Among the participating associations will be theMinneapolis Utility Contractors Association, the
Inaugural MidwestConstruction ExpoSet for March 2010
Vermeerr Tappedd forr LakeCountyy Work…22
Digitall Editionss Availablee atconstructionequipmentguide.com
Catt Auctionn ServicesHostss Salee inn Minn.. …88
Inside
Table of Contents ..............4
Motorgrader Section..41-44
Business Calendar............50
Paving Section............69-78
Parts Section ....................79
Auction Section..........85-94
Advertisers Index ............95
Published Nationally
see EXPO page 50
see TUNNEL page 26
see TOLLWAY page 46
Work onsite began June 1 and by the end of August, thebore machine was in the ground. Its first cut was complet-ed by Aug. 24 and its initial 100-ft. (30.5 m) mining drivethrough shaft 5 was done on Sept. 10.
$3.00
470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®
MidwestEdition
A Case CX225 excava-tor sets coping panelson top of the retainingwall on the toll roadproject.
November 142009
Vol. XVI • No.23
By Maura Bohart and Peter SuanlarmCEG EDITORS
For the past three years, the Indiana TollRoad has undergone major improvements.These improvements came about as a resultof the growing population in Lake and Porter
counties, necessitating the ITR ConcessionCompany LLC (ITRCC) to widen theIndiana Toll Road.
As a result, ITRCC hired Indiana Toll-Roads Contractors LLC, a joint venturebetween Ferrovial Agroman Indiana LLC
Joint Venture TacklesIndiana Toll Road Project
Mark your calendars!The fourth annual Chicago Construction Expo at the
Renaissance Shaumburg Convention Center inSchaumburg, Ill., is primed and ready to go onWednesday, Feb. 24 and Thursday, Feb. 25, 2010. Showhours will be 9:30 a.m. to 4 p.m.
Visitors have come to expect an extensive and diversecollection of exhibitors at the Chicago ConstructionExpo, and this year’s show will be no different.
Additionally, the expo will provide networking andeducational opportunities for attendees. This year’sshow will feature several seminars, training sessions andcertification programs including Julie One Call, LICAand UCA as presenters.
The show is going green this year, with the introduc-
tion of the virtual totebag.The Virtual Totebag is an eco-friendly solution
designed to reduce the cost and waste of printing, ship-ping and distributing paper collateral. With the VirtualTotebag, attendees can request, store and share sessioncontent and exhibitor materials via their mobile devices.
Door prizes, donated by the exhibitors, will be award-ed throughout the show, and show-goers are likely torun into a celebrity or two as they travel the show floor.
For more information on exhibiting, call BobBuckley, CEG Productions sales manager, at 800/992-7116.
For all other questions, call Sheila Kirby, CEGProductions trade show manager, at 800/523-2200, orvisit www.cegltd.com.
Annual Chicago Construction Expo Draws Nears
By Lori LovelyCEG CORRESPONDENT
For the third time in 20 years, Mike Myszkowski,Illinois Department of Transportation engineer, isresurfacing the Bishop Ford Freeway just outside ofChicago. In 1989, a “surface fix” was performed,putting down a 2-in. (5 cm) layer of asphalt. In 1998,the work needed to be repeated, due to wear causedby heavy traffic. Nearly 10 years later, the road onceagain needs repair.
The current rehabilitation project involves resur-facing all lanes and shoulders of the 9-mi. (14.5 km)stretch of freeway between Martin Luther KingDrive and 159th Street, as well as pavement patch-ing, bridge repairs, new guardrail installation andexit/entrance ramp resurfacing — including theStony Island Feeder Ramp.
One of nearly 250 “shovel-ready” constructionprojects in Illinois, the $27.5 million job, funded bythe Stimulus Plan — President Obama’s AmericanRecovery and Reinvestment Act, is a joint ventureheaded by Chicago area-based Gallagher Asphaltand K-Five Construction. Let in April, work got
IDOT Takes onNew Phase forFreeway in Ill.Erb Equipment Acquires
K & W in Ind., Ky. …16
Alex Lyon & Son SaleDraws Bidders in Wis. …68
Inside
Table of Contents ........4
Business Calendar......20
Crushing, Screening &Recycling Section 29-34
Parts Section ..............39
Trucks & Trailers ..53-59
Auction Section ....64-70
Advertisers Index ......71
Published Nationally
see BISHOP page 42see TOLL page 50Digital Editions Available atconstructionequipmentguide.com
$3.00
470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www constructionequipmentguide.com
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®MidwestEdition
October 312009Vol. XVI • No.22
By Giles LambertsonCEG CORRESPONDENT
When the U.S. Senate failed in September to enact six-year transporta-tion legislation or to extend the existing funding authority in a responsibleway, it created a billion-dollar-a-month hole for the construction industry.“The baseline for the federal highway account is reduced by a billiondollars each month we have a continuing resolution,” said Tony Dorsey,media spokesman of the American Association of State Highway andTransportation Officials (AASHTO). “It will cost our members one bil-lion dollars every month we have a resolution.” While the huge loss is mostly on paper — so far — it nonetheless is a
drag on the construction economy. Here’s the deal: Though the Senate agreed with the House at the very last moment to aone-month extension of existing transportation funding authority, senatorsfailed to include a provision to roll back funding rescissions stipulated inthe last six-year bill. The $8.7 billion in rescission money was a book-keeping method of understating the true cost of SAFETEA-LU, whichwas passed in 2005 (two years into the six years of its effective authority).The sleight of hand was needed to help win legislative support. However,the scheduled rescissions never were voided, as planned, and inadvertent-ly became effective Oct. 1.“For most states, it is not hard cash money, just promise money,” said
Congress Lags on Highway Bill Extension
Start Us Up USA!, a nationwide grass-roots campaign of the construction equip-ment industry and their allies, descendedupon Chicago Oct. 20 with a rally of localbusiness and labor leaders and construc-tion workers calling on the federal gov-ernment to move quickly on the reautho-rization of a critical transportation bill. New transportation funding is neces-sary to improve the nation’s infrastructureand spur a recovery of the constructionequipment industry, especially in hard-hitstates like Illinois. The rally was followed
by a caravan of construction equipment,idled by the lack of federal support, parad-ing around Soldier Field to urge the feder-al government to stop job loss.“The construction equipment industryis in a deep depression and we have lost33,000 jobs in Illinois and 37 percent ofour workforce nationwide the past fewyears,” said Toby Mack, president andCEO of the Associated EquipmentDistributors (AED), based in Oak Brook,Ill.
‘Start Us Up USA!’Ralliesfor Investment, Jobs in Ill.
Manitowoc Opens NewCenter in Indiana…12
Ritchie Bross. HostsSale in Medford…75
U of M Kicked Off SeasonWith New Stadium…44
Inside
Table of Contents ........4
Business Calendar......23
Trailers Section ....33-40
Paving Section ......59-67
Parts Section ........68-69
Auction Section ....74-81
Advertisers Index ......83
Published Nationally
Our Latest Issues Are Now Online!Midwest $3.00
“The Nation’s Best Read Construction Newspaper… Founded 1957.” MMidwwestEEdittioonOctober 17200Vo. XV • o.21
CEG CORRESPONDENThort 19-mi. (30.5 km) stretch of road justnorth of Detroit has been transformed into animprovement project with a rather complicatedstrategy. Extensive work on the I-96/I-696 cor-ridor in Oakland and Macomb counties has beendivided into four separate projects.Project 1 consists of rehabilitation of eightbridges and repair of 4 mi. (6.4 km) of pavementin Oakland County between Novi and Halstedroads, including the I-96/I-696/M-5 interchangein Novi and Farmington Hills. Project 2 picks up where the first project endsand involves pavement patching and rehabilita-tion of 42 bridges on I-696 in Oakland Countybetween Halsted and Campbell-Hilton roads. Project 3 focuses on rehabilitating 22 bridgeson I-696, 15 of which are located within the I-696/Mound Road interchange.Project 4 includes rehabilitation of six bridgesand extensive pavement repairs to I-696between Hayes and Nieman roads in MacombCounty Also included are safety upgrades andlighting replacement on the median and ramps.OverlapFor all practical purposes, the $67 millionoverall project has been divided into two con-tracts — east and west — with two prime con-tractors: Dan’s Excavating out of Grant, Mich.,on the west contract and C.A. Hall on the east. But even that division is a little blurry“There are overlapping facets,” says BobDaavettila, construction director for Tetra Tech,
particularly concerning the bridge work. total of 56 bridges will under o rehabilita-tion. Because C.A. Hall is a subcontractor for allbridge work on both contracts and since there’a lot of bridge work in the west contract, Hall isdoing considerable work on both. “Because they’re a major sub, it leads to a lotof coordination. Hall is at all the meetings forthe Dan’s contract.”According to Daavettila, the two big con-tracts consist of a two-year project for $47 mil-lion to reconstruct pavement from Novi toFarmington Hills — the west project —
$14 million contract to conduct bridge rehabili-tation and concrete patching on I-696 — the eastproject. The west contract involves significantamounts of overlay, but there is none on the eastcontract. Instead, there is, as Daavettila says, “alot of concrete patching.”Other Names for an Old-Time TrailBefore being designated as a military high-way in 1832, the corridor from Lake Michiganthrough Detroit, Lansing and Grand Rapids was
MDOTRehabilitates Crucial Mich. Corridor
CEG CORRESPONDENTHealth care reform in the United States has been beaten nearly to deaththis year by advocates and critics alike. Yet as the debate moves intoOctober the final shape of “reform” remains elusive and elastic with con-struction industry executives anxious about its impact on their companies.Any change in the system definitely will have impact on contractorsand a sweeping change could upend smaller firms — and most construc-tion companies are small-to-medium-sized. The truth of the matter is the
reform model in which government would provide most health care serv-ices would dramatically change the way every business operates, lar e orsmall.It is impractical to hope that health care reform will be tailored to theconstruction industry. Nevertheless, small businesses consistently favorcertain reform initiatives over others. ere ashington to institute reformalong the lines general contractors might lay down, the following featureswould be among the legislated changes:• New authority for ssociations to negotiate insurance packages
Constructing a Healthy Look at Health Care Reform
ICUEE Welcomes LargeTurnou tto Louisvi lle…12
Hall Industrial ThanksCustomers in Ohio…58
HCEA Preserves Historyat A nnual Convention…14
Inside
Table of Contents 4Business CalendarTruck & Trailer Section35-42Crushing, Screening &Recycling Section 55-62Parts Section 63Auction Section 68-74Advertisers Index
Published Nationally
A total of 56 bridges will undergo rehabilitation. Because C.A. Hall is a subcontractor forall bridge work on both contracts and since there is a lot of bridge work in the west con-tract, Hall is doing considerable work on both.
Southeast
GDOT Deployment
Cat 321C LCR and 330DL excavators are hardat work at a C.W. Matthews project inNortheast Cobb County, Ga., for emergency Cobb DOT road replacement, w ich includedinstallation of a triple barrel 72 in (183 cm)., 70 ft. (21 m) long piping system and tempo-rary road to service 40 homes that were without a roadway to get out of their Waterfordsubdivision homes.
Georgia Flood Recovery Begins in EarnestSta fford Holds Open Houseat Its New Va. Facility…8
St . Johns River DredgingUnder Way…27HCEA Hold s 24th A nnualConvention…18
Inside “The Naton’s Best Read Construct on Newspaper… Founded 1957.” SoouthheastEEditioon $3.00Published Nationally
Hensel Phelps Leads Chargefor New Fort Bragg CommandsTable of Contentsng Section 33-Mini ompactEquipment Section 49-6Parts Section 64-6ness Cal ndarAuction Section 80-91Advertisers Index 90
New England
CEG CORRESPONDENTIn trucking, cooperation is everythi The same could be for construct on work, all contracti g and the running ofany successful club or organization. Cooperation in all these arenas came together as one at theAntique T uck Club of Americ s Little Rhody ChapteSixth Annual Antique T uck Show on Sept. 13 on theshington Count grounds in Richmond, R.I.orking in conjunction w th the H storical Constructionent Association’ (HCE Northea t Rockbusteronce again, more than 60 me bers of the local tiqueT uck Club brought out their fi nest old equipment, to thedelight and surprise of other me bers, guests and enthusi-asts.The tique T uck Club and the Rockbusters hold thisevent every September drawing people from every NeEngland state. M chines that range from the unusual to theblime fill the flat field of the fairgrounds for passersby to
re.“We combine our show e support them and they sup-port us, even in the rain,” sa id Jackie olatile, who organiz-es these show th her husband, Roger the club’ president. hat m de the presidential couple so proud this year wthat the event w s organized to raise money and food for theRhode Island Food Bank.e brought in 800 pounds of canned goods. Last year, wefed 2,000 needy fam lies for a year and we are quite proud ofthat,” said Jackie olatile.They also are very proud of the cooperat on and sharedinterests of their me bers who bring any and all workingantique machines to these events, as long as they are able.“We welcome classic trucks, we elcome tractors, any-thing that comes in,” added Roge olatile. “A t ue isantique to us.” The olatiles represent the Little Rhody Chapter at nation-al events, usually held in the National Chapter s home stateof Pe sylvania. “There are 21 different chapters in the
Antique Truck Lovers, NE RockbustersJoin for Sixth Annual Machine Show
THE NEW ENGLAND SUPPLEMENT “The Nat on’s Best Read Const on Newspaper… Founded i 1957” 1 111116 201 19595 495 951626 202957 47 91917 690 90 49595195956957 6 395958491918495The Northeast Rockbusters sign adorns a1934 McCor ick Deering track tractor ownedby Dave Bur ham of Saunderstown, R.I., presidentof the group and one of the event’s chief organizers.
Bangor, ME(207)) 942-44838Caribou, ME(207)) 4498-2547 We t oo E(207)) 854--8411Chelmsfo((9778)) 4779-51192 Concord, NH ((6003)) 224-40063Your #1 Source for Used Equipment
Master Service DealNJ, MA & NY800-969-6121www. aftpow .com
A thorizedDeutzDist i toKraft Power Corporation800-969-6121Wo , MA y c e, N
EQUIPMENT FINANCINGCHHARLES RIVEER FFINANCCIAL617-787-9090
Wo w th1/2 to 2 yard loaders. 20 HPDeutz Diesel Engine. 24" Conveyor dumps screenedproducts 9' high
CATERPILLAREQUIPMENTC ll Lo z
ULTI ACHI E INC.888-888-1248• GUARANTEEDTO FIT• HIGH QUALITY• FAST SHIPPINGFor all your used equipment go to.ewsleeper.com
Northeast
lly Lifted to Newing Heights…8
A Hold s 24th A nnualention…18
nti c City WelcomesA Members…12
Inside
Table of ContentsTruck & Trailer Section58-6Crushing, ScreeninRecycl ng Section 67-Parts Section 89ness Cal ndar 111Auction Section 110-128Advertisers Index 126
CEG CORRESPONDENTAfte ny years of discussion, bitiousproject to ease congest on in Pennsyldensely populated Bucks and Montgomery coun-ties is finally under w ithconstruction of a long-aw itedparkwayThe Pennsylvaniae rtment of T ansportation(PennDOT) has estimated thatby 2020 the new highway willbe traveled by between 23,700and 28,300 vehicles dailyCertain changes, howeverhad to be m de before groundcould be broken for the project.ccording to Pe OT theparkw y had initially beenplanned as an expressw ithlimited access. Ho everM rch 2004, the departmentrealized its projected revenueswould not provide enoughfunding for all its proposed
projects and this particular job o g thosere-evaluated. a result, a parkw s ultimate-ly chosen as an appropri ate solution for improvingtravel conditions in the area while rem th-in the lim tations imposed by available funds.
“The Nation’s Best Read Construction Newspaper… Founded 1957.” NortheastEdition $3.00Published Nationally
CEG CORRESPONDENTHealth care reform in the U ited Stateshas been beaten nearly to death this year byadvocates and critics alike. Yet as thedebate moves into October the final shapeof “reform” rem ins elusive and elasticth construction industry executives anx-ious about its impact on their com anies.y change in the system definitely willhave i pact on contractors and a sweepingchange could upend smaller firms —ost const uction companies are small-to-e -sized. The truth of the m tter isthe reform odel in which governmentwould provide most health care servicesould dramatically change the w y everybusiness operates, lar e or small.It is impractical to hope that health carereform ll be tailored to the constructionindustry. Nevertheless, small businessesconsi tentl favor cert n reform itiativesover others. ere shington to institutereform along the lines general contractorsght lay down, the following featureswould be among the legislated changes:
• New authority for ssociations tonegotiate insurance packages for theirmembe .
Besides gaining clout in negoti-ating benefits, association i surance nego-tiators could win lower prem , if giventhe opportunity sociated Builders andContractors noted that private insurancecarriers m st m rk up prem chas 35 percent when dealing w th smallgroups in order to eet profit t ets andoffset overhead. hereas associations canprovide the same nistrative servicesfor their me bers at a cost of 15 percent orless — if, that is, me bers are allowed tobuy insurance through small businesshealth plan pool
ConstructingHealthy Lookat Health Care Construction crews pourconcrete for an abutmentthat will support theRoute 202 parkwaybridge over Route 309.
Words Into Action: Route 202Parkway Finally AdvancesAdditional $30M inFunds En Route to Md.Gov M rtin O’M lley announced th at additional transportationproject worth $30 m llion will be funded by President BarackOb erican Recovery and Reinvestment ct (AFunding for these additional projec ts is available due to savingsgenerated by the intense competition for M ryl high-y and transit contracts advertised earlier this year“Without a doubt, President Obam s recovery program is gen-erating the desired effect here in M ryland,” said O’M lley“Across our state, work i under way rehabil t t ng our roads,bridges and transit systems. He althy com etition for those state
West
“The Naton’s Best Read Construct on Newspaper… Founded 1957.” We tEdition $3.00October 102009Vo . V • o.21
HOLT Crane Hosts OpenHouse in Houston…8
Cashma n Su pports StartUs Up USA! in Vegas…39
Sco tt- Maco n Holds GrandOpening in Da llas…14
Inside
Table of ContentsCrushing, Screening &Recycling Section ..19-23Business Calendar ....20Truck Trailer 3-3rts SectionA ction ection 1-Advertisers Index .....46
Published Nationally
The bridges that were moved vary in length from 85 to 173 ft. (25.9 to 52.7 m and were 43to 94 ft. (13 to 28.6 m) wide. The largest weighed in at 1,350 tons (1,220 t).CEG CORRESPONDENTork on a Utah freeway reconstruction projectso unusual it was featured as Nationaleographic Channel’s “World’ Toughest Fixes”is heading for an on-tim e, on-budget com letionat the end of the yearhat m de work on a 2-m . (3.2 km) stretchof I-80 in S lt L ke C ty project extraos the ccelerated B idge Co truction (A Cethod using Self P opelled Mo lar T ansports(SPMT) to construct six of 12 bridges and one oftwo s in the project.The $139 million project along a 2-m . stretchfro State Street to 1300 E st through S lt L keCity includes construction of the bridges and “not at their final location,” John Montoya,project m nager said. Instead, the girders anddecks were constructed on the ground at a “bridgefarm.” M ssive transporters moved them to belifted into place along the expressw
Horrocks Engineeri ng and H.W LochnerEngineering are the designers and Ralph L.orth Construction is the general contrac-torSome of the bridges were transported as m chle and a half which is “a good distance,”Montoya said. “That w s significant. There are a fair amountof projects where you move a bridge a couplehundred feet but we actually moved some ofthem le and a half.”The bridges that were moved vary in lengthfrom 85 to 173 ft. (25.9 to 52.7 m and were 43 to94 ft. (13 to 28.6 m de, Carlye Som ers, pub-lic involvement m nager for Lochner Thelar est weighed in at 1,350 tons (1,220 t). The SPMTs that moved the bridges hadapproximately 250 wheels and moved at an aver-age speed of five miles per hour, Som eThe only route crews could move the bridgeso the me one the we e work on so
Reconstruction on Schedulefor UDOT’s $139M Project
CEG CORRESPONDENTHealth care reform in the U ited Stateshas been beaten nearly to death this year byadvocates and critics alike. Yet as thedebate moves into October the final shapeof “reform” rem ins elusive and elasticth construction industry executives anx-ious about its impact on their com ies.y change in the system definitely w llhave impact on contractors and a sweepingchange could upend smaller firms —ost construction com anies are small-to-e -sized. The truth of the m tter isthe reform odel in which governmentould provide most health care servicesould dramatically change the w y everybusiness operates, lar e or small.It is impractical to hope that health carereform ll be tailored to the constructionindustry evertheless, small businessesconsistently favor certain reform initiativesover others. Were W shington to stitutereform along the l nes general contractorsht lay dow , the following featuresould be among the legislated changes:• New authority for ssociation tonegotiate insurance packages for theire bers. esides gaining clout in negoti-ating benefits, association insurance nego-tiators could w n lower prem , if giventhe opportunity ssociated Builders andContractors noted that private insurancecarriers m st m rk up prem chas 35 percent when dealing with smallgroups in order to meet profit tar ets andoffset overhead. hereas associations canprovide the same nistrative servicesfor their me bers at a cost of 15 percent orless — if, that is, me bers are allowed tobuy insurance through small business
ConstructingHealthy Lookat Health Care
®
see EXTENSION page 51
see CHICAGO page 16
Diane Benck, vice president of West Side Tractor SalesCo., noted how difficult this recession has been on theemployees of her company as well as the other dis-tributors across America.
DDeeaann MMaacchhiinneerryy HHoossttss CCaattAAuuccttiioonn SSeerrvviicceess SSaallee……7766
IInnssiiddee
Published Nationally
see WSDOT page 56see EXPOS page 45
see RAIL page 28Table of Contents ............4
Truck & Trailer Section ......................................33-39
Crushing, Screening &Recycling Section ....57-63
Business Calendar ........64
Parts Section ................65
Auction Section ......72-78
Advertisers Index ..........79
Page 2 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
PATT
EN C
ONST
RUCT
ION
PROD
UCTS
Call 630-279-4400Fax: 630-279-9243
www.pattencat.comComplete inventory available online
Cat 232B, 2004, UN1671, EROPS, Aux Hyd ........................$21,000
Cat 232B, 2007, UE1061, EROPS, Heat, Aux Hyd ................$20,000
Cat 242B, 2005, W0333, EROPS, Heat, Aux Hyd ................$19,000
Cat 246C, 2008, UE1047, EROPS, Heat, Aux Hyd ................$38,000
Cat 252B, 2004, UE1087, EROPS, Heat, A/C........................$25,000
Cat 252B, 2005, W0372, EROPS, Heat, Aux Hyd ................$19,000
Cat 252B2, 2007, UN2238, EROPS, Heat, Aux Hyd..............$30,000
Cat 262B, 2005, W0523, OROPS, Aux Hyd ..........................$19,000
Cat 272C, 2008, UN2120, EROPS, Heat, High Flow ............$38,000
Cat 287B, 2006, UN1666, EROPS, A/C, Hyd Coupler ..........$32,000
New Holland C185, 2007, UN2251, EROPS, A/C, Aux Hyd $36,000
Cat TH220B, 2005, N3912, OROPS, Hyd Coupler................$40,000
Cat TH360B, 2005, N3785, EROPS, Hyd. Coupler ..............$47,000
Cat 305CR, 2005, W0279, EROPS, A/C, Long Stick ............$39,000
Cat 315L, 1994, UN2173, EROPS, Heat ................................$30,000
Cat 330CL, 2002, UE1017, EROPS, A/C, Aux Hyd ..............$88,000
Deere 450C LC, 2005, A/C, Quick Coupler ........................$225,000
Hitachi EX700, 1994, UN1552, A/C ....................................$95,000
Cat CB-534DXW, 2003, N2824, DD, Water/Vibe SYS, OROPS ..........
....................................................................................................$59,000
Cat CB534D, 2003, N2896, OROPS, Versa-Vibe, DD Water Spray ........
........................................................................................................$50,000
COMPACTION
EXCAVATORS
TELEHANDLERS
SKID STEERS
Rob Mahoney630-758-1296
Mobile: 630-669-6533625 W. Lake StreetElmhurst, IL 60126
ID# N3912 $40,000
ID# UE1013 $110,000
ID# UN1941 $105,000
ID# UN1956 $31,000
Cat D3C XL, 1999, UN1956, EROPS, A/C, PAT Blade ..........$31,000
Cat D4HII, 1990, UE1063, OROPS, PAT Blade......................$25,000
Cat D5HII, 1986, UN1800, OROPS, PAT Blade ....................$44,000
Cat D6R LGP, 2006, UN1810, EROPS, A/C, SU Blade........$235,000
Cat D6R XL, 2006, UN1811, EROPS, A/C, SU Blade..........$229,000
Cat D8RII, 2003, UN2205, EROPS, SU Blade ....................$245,000
Cat 953B, 1994, UN1413, OROPS, GP Bucket, New Paint....$40,000
Cat 953C, 1997, UE1014, EROPS, A/C, GP Bucket ..............$40,000
Cat 963B LGP, 1996, UN1581, OROPS, GP Bucket..............$55,000
Cat 963B LGP, 1997, UN1794, OROPS, Drawbar, GP Bucket$45,000
Cat 963B LGP, 1998, UN1943, OROPS, GP Bucket..............$40,000
Cat 953, 1983, UE1035, OROPS, GP Bkt..............................$23,000
Cat 953C, 1996, UN2137, EROPS, GP Bkt ..........................$45,000
Cat 953B, 1993, UN2176, EROPS, GP Bkt............................$35,000
Cat 420D IT, 2004, UN2289, EROPS, A/C, E-Stick ..............$44,000
Cat 420D IT, 2005, N4236, EROPS, A/C, E-Stick ................$59,000
Cat 420E IT, 2006, N5116, EROPS, A/C, E-Stick ................$65,000
Cat 430D IT, 2005, N4001, EROPS, A/C, E-Stick ................$59,000
Cat 430D, 2004, N3592, EROPS, A/C, E-Stick......................$55,000
Cat 430D IT, 2005, N3997, EROPS, A/C, E-Stick ................$55,000
Cat 938G, 2005, UE1013, EROPS, A/C, Ride Control ........$110,000
Cat 950H, 2006, UE1016, EROPS, A/C, Ride Ctrl ..............$145,000
Cat 980G, 2001, UN0980, A/C, Ride Control, GP BKT ......$199,000
Cat 988G, 2004, UE1058, EROPS, A/C, RCtrl, AutLube ....$220,000
WHEEL LOADERS/LOADER BACKHOES
TRACK LOADERS
DOZERS
ID# UN2283 $110,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 3
The Premier Midwest Equipment Dealer
Rockford Lake Geneva, WI
I-39
Rt.
47
DavenportIA
Morris
1/2 MileRt. 6
W E
N
S
Chicago
Gary IN
Dwight
I-55
“The Premier Midwest Equipment Dealer”
2005 New Holland LB75.B, cab, ridecontrol, extend-a-hoe, 4x4, pilot con-trols, 4-n-1 bucket, 24” bucket, 459
hours, $44,500
2004 Terex TA40, cab, A/C, 40 toncapacity, 6x6, auto lube, 29.5R25
tires, maintenance records available,$84,500
2002 Cat 980G II, cab, A/C, 311HP,66,000#, ride control, 7 yard bucket,
29.5R25 tires, 5,663 hours,$189,500
2003 Cat 963C, cab, A/C, 43,000#, 22”pads, 3.2 yard GP bucket, 2 lever con-
trols, 5,288 hours, $84,500
UNUSED 2008 TrailKing TK110hydraulic detachable gooseneck, 55
ton, self contained, 48’ x 102”, 24’ deck,air ride, air lift 3rd axle, set up for flip
4th axle, 2 pin neck, $49,500 plus FET
2006 Cat XQ1000, 1000 KW generator,Cat C32 diesel, 3 phase, 480V, 2,000
hours, $145,000
2003 New Holland LB75.B, cab,15,500#, 4x4, extend-a-hoe, 2 levercontrols, hammer circuit, 862 hours,
$39,500
2001 Terex TA27, cab, A/C, Cummins diesel, 23.5R25 tires, maintenance records available,
$44,500
2007 Cat 345CL, cab, A/C, 345HP,100,000#, 36” pads, 13’ stick, 1,743hours, factory warranty ‘til 1-8-10,
$224,500
2005 Ford F750, 31,000# GVWR,210HP Cat diesel, 6 speed, 2,000 gal-
lon Ledwell tank, Berkeley pump,15,110 miles, $29,500
2006 Mack CHN613, 427hp Mack dsl, Auto.Trans., 14,600# front, 38,000# rears,
315/80R22.5 front tires, 11R24.5 rear tires,alum budd wheels, 15’6” 12 yd Heil box,spreader pan, electric tarp, 5.02 diff ratio,
220” WB, spring suspension, engine brake,spring suspension, ac, cruise, heated mir-rors, aux tool box, 148,143 miles, $54,500
2006 Hyundai HL780-7A, cab, A/C,65,000#, 335HP, 7 yard bucket, joy-stick controls, 3rd valve, 29.5R25
tires, 3,018 hours, $119,500
2007 Kawasaki 80ZV-2, cab, A/C,210HP Cummins diesel, ride control,5 yard bucket, 23.5R25 tires, 1,294
hours, $98,500
2006 Mack CV713, 427hp Mack diesel, Auto.trans., 18,000# front, 38,000# rears,
315/80R22.5 front tires, 11R24.5 rear tires,alum budd wheels, 15’6” / 12 yard Heil box,spreader pan, electric tarp, 5.02 diff ratio,
215” WB, spring suspension, engine brake,spring suspension, ac, cruise, heated mirrors,
power windows, 127,024 miles, $59,500
2004 Sterling L8500, 56,000# gvw, Cat3126 275 hp, auto. trans., 216” wheelbase, aluminum budd wheels, 16’ Ox
Bow box, Automatic mesh tarp, 11R22.5tires, double frame, 2 way rear door,
spreader pan, ac, cruise control,152,314 miles, $34,500
815-941-1900Fax: 815-941-1486
Email: [email protected]
View Entire List of Equipment at:
www.iltruck.com I-80 Exit 112Joliet
2003 Cat 953C, cab, A/C, 33,400#,20” pads, 2.5 yard GP bucket, draw-bar, joystick, 3,715 hours, $64,500
Page 4 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2009, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings,letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are sub-ject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not nec-essarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsi-ble for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertise-ments are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally andevery effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
IN THIS ISSUESPECIAL SECTION…RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.
FEATURES…AGC OF MINNESOTA HOLDS ITS FIFTH ANNUALHOLIDAY RECEPTIONThis year, the event encouraged contributions to Toys for Tots and collected$1,040 and a car full of toys, games and books.
GARY CARLSON EQUIPMENT SHORES UP BUSINESSIN MINN.The focus of Gary Carlson Equipment of St. Paul, Minn., is simple: provideand install the newest products to meet the needs in shoring equipment fortrench safety, and follow that up with exceptional service.
REP. OBERSTAR VISITS TEREX FACILITY IN GRAND RAPIDSTerex welcomed Congressman Jim Oberstar (D-Minn.), chairman of theHouse Transportation & Infrastructure Committee, for discussions and afacility tour at its compact equipment manufacturing facility on Nov. 30.
CATERPILLAR, ILLINOIS DEALERS WELCOME IAAPMEMBERS TO SAFETY SEMINARThe chance to operate numerous heavy equipment simulators turned outto be the event’s highlight. Representatives from Altorfer Inc., Fabick CATand Patten Industries Inc. welcomed guests to the Caterpillar EdwardsDemonstration and Learning Center.
MACK TRUCKS DELIVER CHRISTMAS TREES IN N.Y., D.C.Who needs flying reindeer when Christmas arrives on a Mack truck? Twoof the most famous Christmas trees in the country were delivered this yearby customers of Mack Trucks Inc.: the Rockefeller Center tree in New YorkCity, and the U.S. Capitol Christmas tree in Washington, D.C.
DEAN MACHINERY HOSTS CAT AUCTION SERVICESSALE IN MO.Cat Auction Services hosted a sale Dec. 1 in Kansas City, Mo. DeanMachinery, the Caterpillar dealer for Kansas City, hosted the sale at its facility.
33
22
20
14
12
57
64 BUSINESS CALENDAR67 CLASSIFIEDS74 COMING AUCTIONS
EQUIPMENT…42 JOHN DEERE G Series Motorgraders51 KOMATSU HD785-7 Off-Highway Dump Truck64 CASE 650L Crawler Dozer
MIDWEST EDITIONCirculated Throughout • North & South Dakota • Nebraska
• Kansas • Minnesota • Iowa • Missouri• Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky
Founder, Publisher & CEO Edwin M. McKeon Sr.Vice President Emeritus Hal Ewing
Midwest Publisher Joseph S. McKeonEditor In Chief Craig Mongeau
Associate Editor Peter SuanlarmEditorial Consultant Pete Sigmund
Production Mgr. John PinkertonController Tom Weinmann
Circulation Mgr. Rolf Krog Asst. Circulation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900 Toll Free 800/523-2200
Fax 215/885-2910Web site www.constructionequipmentguide.com
Editorial e-mail [email protected] e-mail [email protected]
For advertising rates Contact Joseph S. McKeon
• Illinois • Wisconsin • Northwest Indiana
• Missouri • Kansas
773/769-4090Toll Free 800/632-0233
Fax 773/769-4280e-mail [email protected]
Contact Ed Bryden• Central and Eastern Indiana • Michigan • Ohio
• Kentucky
440/268-9690Toll Free 800/810-7640
Fax 440/268-9691e-mail [email protected]
Contact Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota
• South Dakota
952/353-1770Toll Free 866/413-4265
Fax 952/353-2750e-mail [email protected]
76
20
57
12
22
76
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 5
Case CX36B, ‘04, 1028 hrs................$19,500Komatsu PC50MR-2, ‘06, 1161 hrs ..$40,000Komatsu PC150LC-6, ‘98, 9246 hrs ..$39,500Komatsu PC150LC-6, ‘99, 5600 hrs ..$45,000Komatsu PC200LC-7, ‘05, 3800 hrs ..$84,500Komatsu PC200LC-7, ‘05, 2718 hrs ..$89,500Komatsu PC200LC-7, ‘04, 5418 hrs ..$72,500Komatsu PC228UCLC-3, ‘01, 4587 hrs ....................................................................$75,500
Komatsu PC300LC-6, ‘01, 11,700 hrs$67,500Komatsu PC300LC-7, ‘03, 6222 hrs ..$99,500Cat 311B, ‘96, 4080 hrs ....................$29,500Cat 312B, ‘97, 3400 hrs..........................CALLCat 315CL, ‘01, 4080 hrs ..................$55,500Deere 200LC, ‘04, 7000 hrs ..............$47,500Hitachi EX400LC-3, ‘96 ....................$36,500Hitachi ZX450, ‘05, 5060 hrs ..........$139,500
Gehl 7810, ‘04, 1517 hrs ..................$21,500
Blaw Knox PF500, ‘87........................$19,000(2) Hamm HD120HV Rollers, ‘03+’06....CALL(3) Hamm HDO120HV Rollers, ‘06 ........CALLHyster Roller C747B, ‘01, 3497 hrs ..$14,500Hyster Roller C747B, ‘06 ..................$14,500LeeBoy 8500, ‘96 ..............................$22,500LeeBoy 8500, ‘97 ..............................$14,500LeeBoy 8500LD, ‘04, 2236 hrs ..........$45,500LeeBoy 8500LD, ‘04, 2739 hrs ..........$26,500LeeBoy 8515, ‘06, 3300 hrs ..............$29,500IR DD24 Roller, ‘04, 2728 hrs ..........$16,500IR SD105DX Roller, ‘03, 1487 hrs ....$54,500IR 118HFA Roller, ‘04, 1492 hrs ......$39,500Raygo Barco 100 Planner, ‘82 ..........$12,500
Cat D5C, ‘01, 4500 hrs ......................$42,500Cat D6NXL, ‘03, 3841 hrs..................$89,500Deere 550GLGP, ‘96, 4861 hrs ..........$29,500Deere 550GLGP, ‘98, 9415 hrs ..........$21,500Dresser TD9H, ‘00, 1809 hrs ............$28,000Komatsu D31P-20, ‘93 ......................$18,000Komatsu D31PX-21, ‘06, 317 hrs......$56,750Komatsu D475-3, ‘03, 15,197 hrs ............Call
Volvo A35C, ‘01 ..............................$117,500Moxy MT30, ‘95, 9000 hrs ................$37,500
Fabrek FT-133 Harvester, ‘00............$90,000Timbco 415D, ‘99 ............................$145,000Timbco 415D, ‘00, 7365 hrs ............$165,000Timbco 415B, ‘96 ..............................$95,000Timbco 425E Proc., ‘01 ..................$145,000Valmet 911C Processor, ‘00............$110,000
Komatsu WA65-3, ‘02, 3076 hrs ......$36,500Komatsu WA150-5, ‘05, 7422 hrs ....$55,000Komatsu WA380-5L, ‘06, 4293 hrs $115,000Komatsu WA400-1, ‘87, 12,564 hrs ..$39,500Komatsu WA500-3, ‘99......................$70,000Deere 624G, ‘93, 7223 hrs ................$39,500
CMI RS500C Stabilizer, ‘01, 5300 hrs ......................................................................$85,000
Tramac Breaker V55, ‘02 ..................$36,500Komatsu TLB WB140, ‘03, 796 hrs ....$34,000Waldon Broom 250, ‘88, 4800 hrs ......$6,450
MISCELLANEOUS
WHEEL LOADERS
FORESTRY
ARTICULATED TRUCK
DOZERS
COMPACTION, MILLING & PAVING
SKID STEER LOADER
EXCAVATORS
15 Roland Branch Locations in IL, IN, MI, MO, and WI
VISIT
ROLAND MACHINERY.COMCall Dave Reynolds at (217) 789-7711 ~ Email: [email protected]
Call Gary Roberts at (262) 835-2710 ~ Email: [email protected]
Cat 312B, ‘97, 3400 hrs ........................CALL Waldon SM250 Broom, ‘88, 4800 hrs $6,450
IR 118HFA Roller, ‘04, 1492 hrs ......$39,500 Moxy MT30, ‘95, 9000 hrs ................$37,500
Page 6 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Serving the Constructor ®
Performance you can count on
Equipment • Supplies • Service • Rentals
For more information call
the location nearest you today!
Tax Benefits
*This information should not be considered tax advice from McCann.Contact the IRS and your tax advisor for details.
Financial SolutionsEquipment Financing & Leasing
McCann actively works with many commercial lenders to provide financial
solutions to meet your specific needs.
Any Make or Type of Equipment
McCann provides financing for new and used equipment, including:
Aerial Lifts and Booms
Concrete and Asphalt Pavers
Concrete Pumps
Cranes
Crushers and Screens
Horizontal Directional Drills
Trailers
Trucks
Tub Grinders
And more
Contact our Financing and Insurance Manager for more information
Mike Ruddy 630-675-6899 [email protected]
Section 179 Expensing ProvisionsApplies to New and Used Equipment
Under the 2009 American Recovery and Reinvestment Act, you can take
advantage of the Section 179 expense allowance and write off the entire cost
of your new or used equipment purchase in 2009.
• Expensing limit for Section 179 property continues at $250,000, with a
maximum expenditure of $800,000
• Can be combined with depreciation bonus
Bonus DepreciationApplies to New Equipment
Provided under the 2009 American Recovery and Reinvestment Act
• 60% depreciation for the first year—50% depreciation of the purchase cost
plus 20% depreciation of the remaining half
• Only equipment purchased new and placed in service in 2009 is eligible
Equipment purchases through McCann mayhelp you save on taxes and keep cash in your pocket!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 7
Please Contact Bob Williams or Jeff Speer 11200 W Silver Spring Rd. Milwaukee, WI 53225
800/353-1944 414/461-9100 www.FABCO.comOutside WI & Upper Michigan Within WI & Upper Michigan Hundreds of machines. Listings updated daily.
1983 KOMATSU D41P ..........................$18,500S/N 6489, 6,515 Hrs, New Cat U/C
1992 CAT 950F I ....................................$57,500S/N 4DJ00955, 8,734 Hrs, Cntrwght, 4cy,
Bucket, 23.5R25 Tires
2003 CAT 902 ........................................$33,000S/N 7ES01097, 1,753 Hrs, EROPS,
LS rear Dif., 3rd valve
2005 CAT 262B ......................................$23,500S/N PTD01701, 527 Hrs, Canopy, GP Bucket
2005 CAT 268B ......................................$25,000S/N LBA00792, GP Bucket,
Towing Device Not Included
2001 CAT 420D ......................................$39,000S/N FDP00439, 5,421 Hrs, EROPS,
E-Stk, 4x4, Ride Control
2007 DEERE 328 ....................................$20,500S/N 142691, 1,693 Hrs, EROPS/AC,
2 speed, no bucket
1990 CAT D6H LGP ..............................$45,000S/N 3YG00577, 7,835 Hrs, S-Blade,
New P&B Segments
2002 CAT D4G XL..................................$49,500S/N CFN00523, 2,043 Hrs, EROPS, A/C,
PAT Blade, Sweeps
2005 CAT 247B ......................................$24,500S/N MTL01299, 2,274 Hrs, EROPS,
Aux. Hyd., Good U/C
2001 CAT IT28G ....................................$52,000S/N 8CR02826, 8,129 Hrs, QC, 20.5R25 Tires
2005 CAT 140H ....................................$164,500S/N APM01948, 4,663 Hrs, EROPS,
14" Blade Snow Wing
2004 CAT 315CL ....................................$68,000S/N CJC00854, 3,296 Hrs, 10'2" Stick, 28" Pads
2005 CAT 308C CR ................................$66,000S/N KCX01137, 1,300 Hrs, Rubber Tracks, Blade
2005 CAT TH460B ................................$35,000S/N SLF01447, 2,121 Hrs, OROPS,
Tilt Carriage, Forks
1997 CAT 325BL ....................................$60,000S/N 2JR01139, 8,700 Hrs, 48" GP Bucket
Page 8 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
800-888-9515952-895-7033 • 952-895-7054 • 952-895-7044
Sales/Rentals Parts Service
Joe Graham [email protected]
12520 Quentin Ave S. Suite 100 • Savage, MN 55378
Concrete Equipment2006 Soff-Cut X-750 Early Entry Saw, #401249, 8" blade capacity, like new ........................................................................................................................$5,5952006 Allen Pro 1200 Riding Trowel, #357104, 8' width, Gas, Overlapping, 49Hours ........................................................................................................$7,9502007 Miller MB21 Concrete Buggy, #002869, 21 Cubic Ft., Foam Filled Tires,Like New, Propane Only ............................................................................$6,9952007 Canycom Concrete Buggy, #005019, 16 Cubic Ft., Full Rubber Track,Robin Power..............................................................................................$6,9952003 Stone 65CM-E Drum Mixer, #347352, 2HP Electric Motor, 6cu ftCapacity, Towable ......................................................................................$1,4502008 Stone 1285PM Mortar Mixer, #008220, 12 Cubic Ft. Capacity, HondaGas, New Paint ............................................................................................SOLD2002 Stone 1285PM Paddle Mixer, #347331, 11hp Honda, Gear Driven,Towable ....................................................................................................$2,5002007 Wacker CRT36-24A Riding Trowel, #004104, 6' width, 24 hp Honda, 12hours ..........................................................................................................SOLD2007 Wacker CRT48-31V-E Riding Trowel, #004105, New, Never Used, 31hpVanguard, Electronic Steering, 8’ Overall Width......................................$13,2502007 Whiteman/Multiquip HTX-44 8’ Riding Trowel, #009098, Hydro Driveand Steering, Diesel, 125 Hrs..................................................................$16,9952006 Whiteman/Multiquip STH-55 10’ Riding Trowel, #001672, Hydro Driveand Steering, Diesel, 144 Hrs..................................................................$19,000
Forklifts2006 SkyTrak 6042 Telehandler Forklift, #372050, 779 Hrs, OROPS, 50" TiltCarriage, Cummins Diesel, 6000 Lb. Capacity, 42' Max Height ..............$56,7002007 SkyTrak 6042 Telehandler, #54500, OROPS, 50" side-tilt carriage, 550hours ......................................................................................................$54,5002007 SkyTrak 6042 Telehandler, #002414, Cummins, Open ROPS, Side-Tilt,Choice of Carriages, 650 Hours ..............................................................$49,9002006 SkyTrak 8042 Telehandler Forklift, #372063, cab, side tilt carriage 1450hours ......................................................................................................$55,5002007 SkyTrak 8042 Telehandler, #002406, OROPS, 50" side-tilt carriage, new ..................................................................................................................$73,5002006 Lull 944E-42 Telehandler Forklift, #365499, Side tilt, Choice ofCarriages, 3200 hours ............................................................................$52,5002004 Lull 944E-42 Telehandler Forklift, #365022, open ROPS, side tilt car-riage, 2400 hours ....................................................................................$49,0002005 Lull 944E-42 Telehandler Forklift, #808846, 1725 Hrs, OROPS, 50" SideTilt Carriage, Cummins Diesel, 9000 Lb Capacity, 42' Max Height..........$64,0002002 Lull 1044C-54 Telehandler, #16875, Cummins, Cab, 48" Side-Tilt car-riage, Ready to Work ..............................................................................$53,5002005 Lull 1044C-54 Telehandler, #365404, cab and heat, side-tilt carriage,3700 hours ..............................................................................................$66,500
Scarifier1999 Bartell Scarifier, #404461, 8" cut width, Honda..............................$1,9952008 Edco CPM-8-5B Scarifier, #009411, 8" Wide Drum, 5HP/230V ElectricMotor, 220 Lbs, 1/8" Depth @ 350-500 sq ft per Hour ............................$2,0952008 Edco TG-10 Turbo Grinder, #009410, removes 1/16" of concrete @ 400-500 sq. ft per hour, 10" diamond headed disc, 11 hp Honda ....................$2,5952007 Edco TG-7 Turbo Grinder, #005053, removes 1/16" of concrete @ 300-400 sq. ft per hour, 7" diamond headed disc, 2 hp electric ......................$1,795
Pavers2005 LeeBoy 8816 Paver, #007698, grade & slope controls, sonic augers, 8'-15', 1350 hours ......................................................................................$89,5001994 LeeBoy 1000 Municipal Machine (serviced), #010897, 2200 Hours, Nice..................................................................................................................$7,9502007 LeeBoy 5000 Pathpaver, #005542, 165 Hours, Very Nice ............$59,500
Compaction1999 Stone PDB-54 Pad-Foot Roller, #347083, New paint, blade, OROPS,1050 hours ..............................................................................................$17,9951999 Stone RP1350D Plate Compactor, #347039 ..................................$5,9952007 Wacker BPU3050A Reversible Plate Compactor, #005779, low hours,9hp Honda ................................................................................................$3,6502005 Wacker RT-82SC Trench Roller, #47524, 36" width, remote control, artic-ulating, 310 hours ..................................................................................$19,9002003 Wacker RT-820 Trench Roller, #475439, 32" width, pad foot drums,diesel, remote control, 542 hours ..........................................................$16,000
Aerial Lifts2002 JLG 600S Boom Lift, #328035, 4x4, diesel, SkyPower generator, coldweather start package, 3500 hours ........................................................$42,5002002 JLG 600S Boom Lift, #328036, 4x4, oscillating axles, diesel, 3500 hours..................................................................................................................$45,5002005 JLG 800S Boom Lift, #328081, 4x4, diesel, SkyPower generator, coldweather start package, 1750 hours ........................................................$94,500
Generators/Air Compressors2007 Atlas Copco XAS 185 Air Compressor, #007042, 400 Hours..........$8,495
Excavators/Skid Loaders2004 Komatsu SK1020, #427117, 400 Hrs, Open ROPS ......................$18,9002005 Komatsu PC35, #427164, OROPS, rubber tracks, backfill blade, 531hours ......................................................................................................$29,9001999 Komatsu PC30, #906240, 1877 Hrs, Rubber Tracks, Backfill Blade,OROPS ....................................................................................................$23,0002004 Komatsu PC78US-6, #013379, 5450 Hrs, Backfill Blade, Road liner pads,cab, A/C, tinted windows, 24" bucket ......................................................$42,5002008 Wacker WL30, #012156, 143 Hrs, Perkins Diesel, cab w/ heat, aux. hyd,4438 lb straight tipping load, 6857 lb. operating weight, 54" bucket ......$37,000
2004 Komatsu PC78US-6, #013379, 5450 Hrs,Backfill Blade, Road liner pads, cab, A/C, tintedwindows, 24" bucket ..................................$42,500
USED EQUIPMENT
2008 Wacker WL30, #012156, 143 Hrs, PerkinsDiesel, cab w/ heat, aux. hyd, 4438 lb straight tip-ping load, 6857 lb. operating weight, 54" bucket ......................................................................$37,000
800-888-951512520 Quentin Ave. South,Suite 100, Savage, MN 55378
AUTHORIZED DEALER FOR JLG • SKYTRAK • LULLEast Metro/Southeastern MN
Tom Major612-710-1941
Western MN & West MetroJeff Sisk
612-282-2099
• RENTALS • SALES • PARTS • SERVICE
2007 SkyTrak 10054 Telehandler, #005300, 60" Side-Tilt Carriage, New Tires, 1531 hours ..................$79,900
2007 WackerBPU3050A
Reversible PlateCompactor, #005779,
low hours, 9hpHonda ............$3,650
2007 AtlasCopco XAS 185
Air Compressor,#007042, 400
hours ......$8,495
Features• Automatic fork leveling system for preci-
sion load placement• Side-mounted engine for easy access and
serviceability• Stabil-Trak stability system for increased
operator confidence• Cummins engine with 4-speed powershift
transmission for efficient control• Variety of attachments for high versatility
in handling jobsite challenges
1999 Stone PDB-54 Pad-FootRoller, #347083,New paint, blade,OROPS, 1050hours ..$19,750
Lull 644E-42
Lull 1044C-54 Series II
Lull 944E-42Lull 944E-42
Features• Automatic fork leveling system for precision
load placement• Side-mounted engine for easy access and
serviceability• Stabil-Trak stability system for increased
operator confidence• Cummins engine with 4-speed powershift
transmission for efficient control• Variety of attachments for high versatility in
handling jobsite challenges
Features• Automatic fork leveling system for
precision load placement• Tier II compliant John Deere diesel
engine• 4-speed powershift transmission for
efficient control• Full-time 4WD for increased maneu-
verability• Standard front outriggers for
increased stability• Variety of attachments for high
versatility in handling jobsite challenges
South Metro/Southwestern MNTim Rients
952-292-6285
Central MNLyle Knutson320-894-6500
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 9
AALLEEXX EE.. PPAARRIISS CCOONNTTRRAACCTTIINNGG CCOOMMPPAANNYY,, IINNCC..Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928
Our Greatest Assets .. Our Employees
Komatsu WA180-1, 1996, EROPS, Quick Coupler,Exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . .$46,500Komatsu WA250-3PT, 1999, EROPS w/AC, JRB cou-pler, bucket, forks 20.5x25, good cond. . . . .$63,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . .$100,000Cat 936E, 1989, EROPS, 2.75 cy GP bkt, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,000New Holland LS170 Skid Steer, 2004, 300 hrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,000John Deere 624G, 1996, EROPS, quick coupler, GPbkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$66,000
IR DD22, 1993, 39" double steel, vibratory, Deutz dsl,water spray, v. good . . . . . . . . . . . . . . . . . . . .$18,500IR SD100D Pro-Pac Vibratory Compactor, 1999,Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS, veryclean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit,ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000Cat 825B, 1975, cab, S-blade, 50% front, 20% reartires, good runner, can go to work . . . . . . . . .$52,500Cat 825C, 1988, EROPS, S-blade w/tilt, rear 80%,front 60%, good condition . . . . . . . . . . . . . . . . .CALLGalion S4-6B, Deutz dsl, hydrostatic, 42” drums,transport wheels, water spray . . . . . . . . . . . . .$4,800Hypac C747B, 2001, articulated, vibratory, 47” drums,water spray, Deutz 2 cyl, 5500#, good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500Hypac C850B, 1999, ROPS w/cab, 84” smooth drum,drive, Cummins, 18-26 tires . . . . . . . . . . . . . .$47,500Multiquip MR8G Walk Behind VibratoryCompactor, 1997, Briggs & Stratton 8 HP gas engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,500Rammax Walk Behind Rollers, over 25 in stock,lever & remote . . . . . . . . . . . . . . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum & singledrum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500(2) Champion Superpac A421 . . . . . . . . . .$11,500
Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000
Komatsu CD60R-1 Crawler Dump Truck, 1997, 360°rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66,000Terex TA40, 2000, 6WD, 6x6, 40 ton Detroit 60 Series,Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142,500Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD,29.5R25, A/C, 29 cy cap. sideboards, tailgate (currentlyoff work), work ready . . . . . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25,working everyday . . . . . . . . . . . . . . . . . . . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt .$115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C,P/S trans, tailgate, work ready . . . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx7,000 hrs, good condition . . . . . . . . . . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,P/S trans, working everyday on jobsites . . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C,P/S trans, 26 cy, working everyday on jobsites $89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500
Cat D4H Series II, 1990, OROPS, 6 way blades, 18"pads, draw bar, 100% Cat U/C . . . . . . . . . . .$57,000Cat D6H, 1988, OROPS, S-blade w/tilt . . . .$76,000Cat D6H LGP Series II, 1993, EROPS, diff steer,drawbar, 30" pads, fresh undercarriage . . . .$89,000Cat D6H, 1987, Semi U blade w/tilt, ROPS, fair U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,000(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 EaKomatsu D37P-5, 1997, 24" Pads, OROPS, P/S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36,500
Case 480 Broom Tractor, frt mounted 6' sweepsterbroom, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . .$13,000Case/IH 485 Utility Tractor,1986, Case 3 cyl dsl engine,55 gal water tank . . . . . . . . . . . . . . . . . . . . . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72"hydraulic broom . . . . . . . . . . . . . . . . . . . . . . . . . .$11,500Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hydlift, exc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15,500Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hydangle tongue, scrapers, 2” axles . . . . . . . . . . . . .$9,500
IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . . . .CALL
Vermeer 5800 Trencher, 1997, 4 cyl dsl eng .$17,500(12) IR L6-4MH Light Plants, 1992-1995, all excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLIAmerican Augers 16" Boring Machine, 10 HP gas,35,000# thrust, 30' track . . . . . . . . . . . . . . . . . . . .$7,500
Cat 416C IT, 2000, 4x4, OROPS, Quick Coupler, GPBkt, Extendahoe . . . . . . . . . . . . . . . . . . . . . . . . .$36,000Case 580L Rubber Tire Loader Backhoe, 1997,OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . . .$24,500Volvo BL70, 2003, 4x4, Extend-A-Hoe, EROPS, 24"Bkt, Like New . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,500
Cat 621F, 1996, Scraper, OROPS, 33.25x2, very goodcondition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL
JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou-pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$39,000Hitachi UH181, 1985, Equipped w/hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, operational . . . . . . . . . . . . . .$10,500/OFFERCat 215BLC, 1985, 7'3" stick, 28" TBG pads, 10 rollerU/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31,500Cat 313B-CR, 2001, zero tailswing, A/C & AM/FM,JRB quick coupler . . . . . . . . . . . . . . . . . . . . .$93,000Kobelco SK200LC Extra Long Reach, 1993, 32"TBG pads, 42' reach, nice . . . . . . . . . . . . . . .$68,500Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, longstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44"Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt,27.6" TBG pads, work ready . . . . . . . . . . . . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . .CALLKomatsu PC750 LC-6, 1999, 454 hp, 27” boom,11’10” stick, 44’ DGB, aux plumbing, bucket choice,24k ctwt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$255,000Komatsu PC400 LC-6LK, 1999, 10’6” stick, JRB cou-pler, 31.5” TBG, ctwt removal, choice of bkt .$77,500Komatsu PC400 LC-6LK, 11’1” stick, 35.5”TBG, ctwtremoval, choice of bkts, working everyday . .$97,500Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRBcoupler, plumbed, 8’6” width, nice, work ready CALLVolvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumb-ing very good condition . . . . . . . . . . . . . . . .$205,000
(2) 48' Box Vans w/Liftgates, Good Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL
Power Screen, Mark II, 1987, Port. Screening Plant,Double Deck, 24'x40' . . . . . . . . . . . . . . . . . . .$36,000Viper 301 Portable Screening Plant, 1997, dsl, 5'x7'.side & rear conveyors, T/A carrier . . . . . . . . . . .CALL
John Henry Drill Mtd on Cat 320N, 1994, 24' mast,Duraquip dust collection . . . . . . . . . . . . . . . .$150,000John Henry Drill Mtd on Cat 320L, 1994, 24' drill,carousel, dust collector . . . . . . . . . . . . . . . .$162,500
Grove RT58C, 1981, down cab, 18 ton r.t., 70' boomanti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500Drott 3330B Carry Deck, 7.5 ton capacity, dsl, 4 sec-tion boom 8' jib . . . . . . . . . . . . . . . . . . . . . . . .$14,500Shuttlelift Model 3330 ELB Hyd. Carry Deck Crane,duel fuel, elec. winch w/remote control, exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,500
(2) Balderson Broom Attachment for Cat ITMachines, 8' wide, good condition . . . . . .$4,000 ea.
BUCKETSPC1000, 84" Digging Bucket . . . . . . . . . . . .$9,500
Over 100 Excavator, Loader, Specialized &Grapple Buckets in Stock
-Call For Your NeedsFORKS
(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style,excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000(5) Cat 936/926/950 pallet forks, for a Balderson quickcoupler, exc. cond. . . . . . . . . . . . . . . . . . . .$3,500 Ea
Others Available CallPrices Are Negotiable - At Your
InspectionAll Equipment is Owned & Operated By
ALEX E. PARIS CONTRACTING CO., INC.
ATTACHMENTS
MISCELLANEOUS
CRANES
DRILLS
CRUSHING & CONVEYING
TRUCKS & TRAILERS
HYDRAULIC EXCAVATORS
MOTOR SCRAPERS
BACKHOES
SPECIALS
AIR COMPRESSORS
LANDSCAPING
CRAWLER TRACTORS
OFF ROAD HAULERS
CRAWLER LOADERS
COMPACTORS
WHEEL LOADERS
Page 10 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
FCC EQUIPMENT FINANCING (A Caterpillar Company)
Jacksonville, FLDarold Longhofer (904)625-9259 • Cell (904)610-7939 • Home (904)880-3587
Great Used Equipment Values1970 EUCLID B30, S/N 62E1958 ........................$13,0001970 EUCLID B30, S/N 62E1821 ........................$13,0001970 EUCLID B30, S/N 62E1816 ........................$13,0001970 EUCLID B30, S/N 62E1957 ........................$13,0002004 JCB 714, S/N E0830195 ............................$53,6002004 JOHN DEERE 400D, S/N BE400DT201041 ........................................................................................$135,200
2006 KOMATSU HM300-0, S/N A11002 ..........$131,6001994 VOLVO A25C, S/N A25V8715 ....................$33,500(2) 1994 VOLVO A30, S/N V1487 ..............From $30,100(2) 1998 VOLVO A35C, S/N V5086 ............From $42,7002001 VOLVO A35D, S/N 61113 ..........................$73,000
1999 BLAW KNOX PF161, S/N 16126-04 ..........$24,3001998 BLAW KNOX PF3172, S/N 317211-08 ......$29,5002000 LEEBOY 8500, S/N 2497-8500 ..................$18,500
2006 DEERE 410G, S/N 946106 ..........................$46,0002005 JCB 214 SERIES III, S/N 904421................$20,7002004 JOHN DEERE 210LE, S/N T0210LE882955..........................................................................................$16,000
2002 JOHN DEERE 310G, S/N 907184 ................$24,2002004 JOHN DEERE 310SG, S/N 926142..............$29,0002004 JOHN DEERE 710G, S/N 939117 ................$45,0002003 VOLVO BL70D, S/N 10269 ..........................$28,200
2002 CBI 4000B, S/N 4840HZK34123A0660 ....$152,000
2004 AMPAC P33/23, S/N 33071104 ....................$6,0002001 BOMAG BW142PDB-2, S/N 136510511036 ........................................................................................$14,000
1994 DYNAPAC CA151PD, S/N 59810775 ..........$21,7002000 DYNAPAC CA250PD, S/N 65320989 ..........$31,1001996 FORD LN8000, S/N 1FDXR82EXTVA27463..........................................................................................$11,000
2006 HAMM 3410, S/N H1690654 ......................$37,0002006 HAMM 3410, S/N H1690638 ......................$38,0002006 HAMM 3410, S/N H1690694 ......................$38,0001988 INGERSOLL RAND DD90, S/N 5454S ........$13,0002000 INGERSOLL RAND PT125R, S/N 164701 ..$21,0002005 INGERSOLL RAND SD100D, S/N 151759 ..$61,5001998 INGERSOLL RAND SD100F, S/N 154044....$29,0001997 INGERSOLL RAND SD70D, S/N 148473 ....$19,5002000 INGERSOLL RAND SD70D, S/N 163541 ....$27,0002000 INGERSOLL RAND SD70D, S/N 165166 ....$27,7001999 INGERSOLL RAND SD70F, S/N 157999......$19,0002006 INGERSOLL RAND SD70F, S/N 191728......$37,4002003 INGERSOLL RAND SD77F, S/N 174481......$24,5002005 INGERSOLL RAND SD77F TF, S/N 179314..........................................................................................$27,500
(2) 2005 SAKAI SV505T, S/N VSV16-40175........$44,6001999 STONE 3100 WOLFPAC, S/N 2699294 ........$3,0001999 Vibromax W1103D, S/N JKC8302602 ........$33,2002003 VIBROMAX W1105D, S/N JKC8305009......$32,500(2) 2006 WACKER BS50-2I, S/N 88591....................$800(2) 2003 WACKER RT820, S/N 5396924 ..............$6,500(4) 2006 WACKER RT82SC, S/N 5671753 ............$9,200
2000 CONCORD CCP 36M15, S/N1M2K197C21M017771 ......................................$121,5001999 Mack MR688, S/N 1M2K189C5XM013746..........................................................................................$89,800
2004 MACK MR688S, S/N 1M2K197C74M023571 ....................................................................................$182,300
2005 POWERSCREEN 1400, S/N 6614644........$101,5002006 POWERSCREEN M85, S/N 6103501 ..........$38,5002007 RADIAL CONVEYOR STACKING, S/N 24X60-07-0101 ....................................................................$12,200
2006 BL PEGSON 1000SR, S/N 100312DDSR ..$362,0002004 CEC 102X115, S/N 4538 ..........................$161,5002007 EAGLE 1200-25, S/N 30696......................$346,3002003 EXTEC 1013, S/N 7864 ............................$200,5002001 EXTEC MEGA-BITE, S/N 6024 ..................$136,2002006 IROCK RDS15H, S/N P90216 ..................$451,300
2008 Bengal TG1000P ..........................................$9,6002005 GOMACO GT3600, S/N 902900-641 ..........$90,4002006 GOMACO GT3600, S/N 902900716 ..........$120,000
2006 ATLAS COPCO ECM590, S/N 11457 ........$161,5002008 DITCH WITCH JT1220, S/N J1220A80000278 ....................................................................................$64,000
2007 DITCH WITCH JT520, S/N CMWFT5XXE70000081..............................................................................$40,000
2001 BOBCAT 331D, S/N 232511818 ..................$12,2002002 BOBCAT 341D, S/N 233212073 ..................$19,1002001 DAEWOO S170-V, S/N 1041 ......................$30,0002001 DEERE 200LC, S/N 501934 ........................$32,0002004 DEERE 330CLC, S/N 82918 ........................$54,5002004 HITACHI EX550LC, S/N 7417....................$124,1002006 HITACHI ZX350LC-3, S/N FF00ASP920074 ......................................................................................$100,000
2004 JOHN DEERE 160C, S/N FF160CX044325 ..........................................................................................$47,500
1998 JOHN DEERE 230LC, S/N FF0230X060077..........................................................................................$33,200
2004 JOHN DEERE 330C LC, S/N 082992 ..........$67,0002003 JOHN DEERE 330CL, S/N 082448 ..............$59,0002005 JOHN DEERE 330CL, S/N 083241 ..............$76,0002005 JOHN DEERE 330CL, S/N 804394 ..............$76,0001999 JOHN DEERE 330LC, S/N FF0330X080564..........................................................................................$39,500
2004 JOHN DEERE 330LC, S/N 082657 ..............$67,0002003 JOHN DEERE 450CLC, S/N FF450CX091265 ......................................................................................$80,300
1999 JOHN DEERE 450L, S/N FF0450X090297 ..$49,0001999 JOHN DEERE 450LC, S/N 90419 ................$51,7001988 JOHN DEERE 790D, S/N 790DL007763......$12,2002006 KOBELCO 70SR, S/N YT0306041 ....................POR2002 KOBELCO SK200SR, S/N YB0201701 ........$38,5002001 Kobelco SK250, S/N LL08U0421................$35,9001998 KOBELCO SK300LC, S/N YCU0961 ............$24,5002004 Kobelco SK330, S/N YC07-U0745..............$50,1002003 KOBELCO SK480, S/N YS06U0273 ............$56,0002007 KOMATSU 78MR, S/N 1002449..................$43,5002001 KOMATSU PC300LC, S/N A84699 ..............$50,0002000 KOMATSU PC300LC-6LE, S/N A84629 ......$45,500(2) 2004 KOMATSU PC300LC-7, S/N J20408......$87,5002003 KOMATSU PC400LC-6, S/N A85328 ..........$85,0002005 KOMATSU PC600LC-7, S/N 20108 ..........$225,0002007 TAKEUCHI TB145, S/N 14516716 ..............$34,1002007 TAKEUCHI TB175, S/N 17515812 ..............$53,4002003 VOLVO EC210BLC, S/N EC210BLC11522 ..$49,8002007 VOLVO EC210CL, S/N 210C110192 ............$75,0002003 VOLVO EC240BLC, S/N V10780..................$58,500(6) VOLVO EC330BLC, S/N V10081 ..........From $60,8002005 VOLVO EC360BLC, S/N 11632 ....................$93,6002006 VOLVO EC460BLC, S/N 80037 ..................$139,500
2002 JOHN DEERE 843H, S/N 882070 ................$49,0001993 MORBARK WOLVERINE, S/N 4172 ............$19,8002000 MULTITEK 3040-90XP FIREWOO, S/N 5050200 ................................................................................$36,500
2005 TIMBER KING TK722, S/N C10300205 ....$109,5002005 WARATAH HTH622B, S/N 622342 ..............$48,500
2007 PEMBERTON CAST, S/N C/EGR-004-4-0606 ......................................................................................$11,600
(3) 2007 PEMBERTON MATERIAL, S/N MDG300-194-5-0607 ....................................................................$11,600
2006 RAMMER S-27, S/N 27AAA0667 ..................$8,6002003 STANLEY MB50EXS, S/N 2279....................VALUE!
2007 MORBARK 4600XL, S/N 188-1042 ..........$382,800
2007 CLARK CMP70, S/N CMP570D-0894-9590 ........................................................................................$31,400
2006 GEHL RS5-34, S/N RS5JW0912223 ..........$26,0002007 GENIE GTH-5519, S/N 16804 ....................$31,500(2) 2004 KOMATSU FG35ST-7, S/N 103491..........$8,5001994 Moffet M5000, S/N 4414 ..............................$4,400(2) 2005 PRINCETON PB-50, S/N P10462 ..........$18,2002000 Skytrak 8042, S/N 13340............................$21,100(2) 2006 TAYLOR THC-300S, S/N 33008 ..........$100,0002006 TAYLOR THC-400L, S/N 33106 ................$116,500
2007 DITCH WITCH FX30, S/N FX30X0436 ........$27,5001996 INGERSOLL RAND 185, S/N 144690............$3,800
(3) 2006 MACK CV713, S/N 1M2AG11C16M030801....................................................................................$78,000
2004 JOHN DEERE 670CH, S/N DW670CH590183 ......................................................................................$82,100
2000 KOMATSU GD530A-2, S/N 210391 ............$51,5002004 KOMATSU GD655-3C, S/N 51038 ............$112,300
2002 Labounty UP30, S/N UP30204 ..................$26,200
1973 Bros LSPRM8A, S/N 4150 ............................$6,000
1988 JOHN DEERE 862B, S/N 744221 ................$17,000(3) 1979 TEREX TS14B, S/N 17U0T61100 ........................................................................................From $13,000
1975 ROME R67H, S/N R67H10516......................$1,500
2007 EXTEC E7, S/N 10502 ..............................$155,0002006 WILDCAT 510 COUGAR, S/N1W9SS26156F351462 ........................................$63,500
2002 BOBCAT A300, S/N 539911335 ..................$17,1002007 DITCH WITCH XT850, S/NCMWXT850C8C80000256....................................$16,5001998 JOHN DEERE 8875, S/N 040509 ................$10,000
2003 JOHN DEERE 648G-III TC, S/N 588699 ......$45,500
2005 ZIPPER AZ-480HD, S/N 109FS08235U022988....................................................................................$35,000
(2) 2000 JOHN DEERE 555G, S/N 890992 ..........$21,5002005 TAKEUCHI TL140, S/N 21402461 ..............$17,000
2001 DEERE 550H, S/N 898990 ..........................$31,0002004 DEERE 650H, S/N 930092 ..........................$35,5002004 DEERE 650H, S/N 931730 ..........................$35,5002004 DEERE 650H LGP, S/N 926713 ..................$46,5002004 DEERE 700H, S/N 938631 ..........................$52,5002000 JOHN DEERE 450H, S/N 883527 ................$23,5002003 JOHN DEERE 450H, S/N T0450HX913212 $27,5002007 JOHN DEERE 450J LGP, S/N 117871 ........$40,8001998 JOHN DEERE 650G LGP, S/N 84881.......... $24,500(3) 2000 JOHN DEERE 650H, S/N 891545 ........................................................................................From $29,500
2005 JOHN DEERE 850JLT, S/N TO850JX113640 ......................................................................................$117,000
2004 KOMATSU D39EX-21A, S/N 1578 ..............$39,6002004 KOMATSU D39EX-21A, S/N 1553 ..............$39,600(2) 2005 KOMATSU D39EX-21A, S/N 1721 ........$45,100
2002 MASSEY FERGUSON 243, S/N J23115 ........$6,1002005 MASSEY FERGUSON 461, S/N EP10060......$9,200(4) 2003 MASSEY FERGUSON MF451-4, S/N BN15020 ......................................................................From $7,000
2002 McCORMICK F70XL, S/N PFKCM50202 ....$11,200
(2) 1999 TRAILER HEATED, S/N 1GRAA0620XB024202 ................................................................................$3,900
1997 TRAILER REFRIGERATED, S/N1GRAA062XVB089443 ..........................................$7,300
2007 SMITHCO SL24034, S/N 1S9SS40227L476357 ..................................................................................$33,000
1999 DITCH WITCH 3700LJ, S/N 3X0647 ............$3,900
1987 LIEBHERR LTM1160, S/N 12413 ..............$295,2001988 MACK RD690SX, S/N 1M2P199C7JW003016 ....................................................................................$62,000
2006 STERLING LT7501, S/N 2FZHATDCX6AV55737 ................................................................................$152,400
1999 DIAMOND Z 1352BL1, S/N 1D9FX4232XN147001 ............................................................................$150,800
2007 Vermeer TG7000, S/N 1VRY4536271000154 ..................................................................................$378,000
1999 DEERE 644H, S/N 572749 ..........................$46,7001999 JOHN DEERE 444H, S/N DW444HX573676 ........................................................................................ $26,5001999 JOHN DEERE 544H, S/N 572508 ................$35,0002000 JOHN DEERE 624H, S/N 578008 ................$41,0002003 JOHN DEERE 724J, S/N 588116 ................$70,500(2) 2006 KAWASAKI KSS65Z-V, S/N 65C4-5475................................................................................From $53,200
1998 KOMATSU WA180-3L, S/N A90247 ............$27,4001997 KOMATSU WA250, S/N A70085..................$24,2002006 KOMATSU WA250PT-5L, S/N A79287 ........$63,0001998 KOMATSU WA450-3, S/N 53217 ................$36,9002001 VOLVO L70D, S/N V19086 ..........................$41,4002005 VOLVO L70E, S/N V60611 ..........................$71,000
WHEEL LOADERS
TUB GRINDER
TRUCK CRANES
TRENCHER
TRAILER SIDE DUMP
TRAILER - REEFERS
TRACTORS AG
TRACK TYPE TRACTORS
TRACK LOADERS
STABILIZER/RECLAIMER
SKIDDER
SKID STEER LOADERS
SCREENING PLANTS
SCRAPER - PULL TYPE
SCRAPERS - MOTORS
PULVERIZER
MULTI-PROCESSOR
MOTOR GRADERS
MIXER
MISCELLANEOUS
LIFT TRUCKS
HORIZONTAL GRINDERS
HAMMERS
GRAPPLES
FORESTRY
EXCAVATORS
DRILLS
CURB & GUTTER MACHINES
CRUSHERS
CONVEYORS
CONCRETE PUMPS
COMPACTORS
CHIPPER
BACKHOE LOADERS
ASPHALT PAVERS
ARTICULATED TRUCKS
Machines are located in various parts of the U.S. Please call for locations and pricing. Visit our website at FCCEF.com for pictures and more information. Call Darold Longhofer at (904)625-9259 or Cell (904)610-7939 or Home (904)880-3587. Allen Breinig at (904)625-9290. Tom Camphire at (904)625-9263.
In Mexico call Luis Ramirez at 01 81 24 51 42 34 or cell 044 81 15 08 47 96. El Cercado (Monterrey) NL. Email [email protected]. [email protected] [email protected]
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 11
Milwaukee, WI1-800-236-6900Fax 414-541-1892
Wausau, WI1-800-242-7113Fax 715-675-9748
Crushing & Screening Div.Little Chute, WI1-800-236-8318Fax 920-788-6753
View us at:www.amstate.com
YOUR AUTHORIZED DEALER
in WISCONSIN and UPPER MICHIGAN for:
FFoorr iinnffoorrmmaattiioonn oonn oouurr iinn--ssttoocckk eeqquuiippmmeenntt,, ccoonnttaacctt LLaannnnyy PPeetteerrssoonn aatt::llppeetteerrssoonn@@aammssttaattee..ccoomm oorr
mmoobbiillee 11--771155--557744--88008899 oorr 11--880000--224422--77111133
Large Selection of New & Used Equipment in Stock.AGGREGATE EQUIPMENT
SIMPLICITY portable dual screen plant, 6x16 and
6x20 triple deck horizontal screens, 60"
underscreen conveyors, 42" cross conveyors,
tri-axle chassis with hydraulic leveling ..$199,800
CEDARAPIDS 4136 Portable twin roll plant, with
Allis 5'x16' single deck horizontal screen,
Cummins V-12 diesel, on tandem axle chassis
with hydraulic leveling..........................$68,000
ALLIS H400-SD portable cone plant, Cummins
diesel, rear feed conveyor, side discharge con-
veyor, tandem axle chassis with run-on
hydraulic jacks ..................................$172,800
WHEEL LOADERSKAWASAKI 95Z-V, wheel loader (2006), 340 hp
Cummins QS15 diesel, 4/3 speed Powershift
transmission, 29.5x25 Bridgestone L3 radials, 7
cu. yd. GP bucket, enclosed ROPS with a/c ......
..........................................................$259,900
CRANESGROVE RT760 60 TON CAPACITY ROUGH TER-
RAIN CRANE, 1993, with Cat Diesel, 110’
Power-Pinned Boom, 32’ to 56’ Telescopic
Offsettable Swingaway, Main & Auxiliary Hoists,
29.5x25 Tires, Ready to work ............................
......................................Reduced to $219,900
GROVE TM890 90 TON HYDRAULIC TRUCK
CRANE, 1991, with a 114’ full power boom, 33’
to 58’ Telescopic Offsettable Swingaway, Grove
Model HO30B-26 Main and Auxiliary Hoists,
Cummins 6BT5.9 superstructure engine, on a
Grove 8x4 carrier with a Cummins NTC400 Big
Cam III diesel, 13 speed Roadranger, and a
Nelson tandem-axle boom dolly ........$235,000
MANITOWOC 777 175 TON CRAWLER CRANE,
2000 model, 220' main boom, 40' fixed jib,
hoists with free-fall option, 48" track shoes,
Series II counterweight, self-assembly package,
Cummins diesel, third drum, 7000 hours, job
ready ..................................................$950,000
GROVE HYDRAULIC CRANES •PETTIBONE EXTENDO LIFTS and CARRY LIFTS •
LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLERCRANES and HYDROSTATIC WHEEL LOADERS • KAWASAKI
WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG
CRUSHERS • MANITOWOC CRANES
MANITOWOC 777 GROVE TM890
CEDAR RAPIDS CR362L - ‘08 • Track w/electric Stretch 16 screed, Top Con V, 720hrs..........................................................................................................................$CallCEDAR RAPIDS CR462L - ‘08 • Track w/Electric Stretch 20 Screed, Top Con V, 420hrs..........................................................................................................................$CallMAULDIN 690FT - ‘08 • 8' to 13' gravity fed track paver (LOW HOURS), 29 hrs....................................................................................................................................$42,500MAULDIN 1750C - ‘08 • 8' to 16' conveyor fed track paver (LOW HOURS) ....$95,000MIDLAND SP-6 - ‘09 • Legal load, Rt hand discharge to 6', low hrs................$99,500MIDLAND SPD-8 - ‘09 • Dual discharge to 8', low hrs ..................................$149,950NEAL 5500 - ‘08 • “Cart Path Paver”, track, conveyor fed, 5'-8' screed, 140 hrs ....................................................................................................................................$49,950
CALL items may be on rent causing pricing and hours to vary.
INGERSOLL RAND DD90HF - ‘06 • 66" high freq, dbl drum vib, w/lites, 1300 hours ............................................................................................................................$70,000INGERSOLL RAND DD112HF - ‘06 • 78” high freq, dbl drum vib w/1500 hrs $60,000INGERSOLL RAND SD105DX - ‘04 • 84" smooth drum soil with 1020 hrs ......$53,500SAKAI CR270 - 36", 3000lb, 4000VPM, vibratory, 200 hrs ..............................$13,500SAKAI SW300-1 - ‘09 • 39.2" Dbl Drum vib w/ 36 hrs ....................................$29,950SAKAI SW320 - ‘09 • 47" Dbl Drum vib w/ Foldable ROPS, EPTW, 100 hrs ....$27,429SAKAI SW330 - ‘07 • 51", 6700lb, 4000VPM, dbl drum vib with 320 hrs, warranty................................................................................................................................$29,950SAKAI SW652 - ‘09 • 58" Dbl Drum vib w/ 172 hrs..........................................$68,500SAKAI GW750 - ‘09 • 77" Pneumatic vibratory roller w/ heat shields, 385 hrs......................................................................................................................................$102,500SAKAI SW800II - ‘09 • 67" Dbl Drum vib w/ 184 hrs........................................$81,500SAKAI SW850 - ‘09 • 79" Dbl Drum vib, EPTW w/ 500 hrs ..............................$88,750SAKAI SW880 - ‘09 • 79" Dbl Drum vib w/ 141 hrs........................................$116,175
GRADALL XL 4100 - ‘02 • w/72” ditching bucket, 4000 hrs, good shape ........$49,500
PSI MD413XT - ‘08 • 10' moldboard, front bucket, rear scarifier, enclosed cab, 133hp, 14,000 lbs, 120 hours ................................................................................$84,950
TEREX PR165 - ‘09 • 24” cutting width, 4 large rubber tires, large front loading con-veyor, 300 hrs ................................................................................................$175,000TEREX PR330T - ‘08 • 4 track, front loading, milling machine with “combo cutter”2',3',4' widths, 850 hours ..............................................................................$279,000WIRTGEN W50 - ‘04 • 20” cutting width, 4 wheeled, rear discharge conveyor, 250 hrs..........................................................................................................................$95,000
COLD MILLING MACHINE
MOTOR GRADER
RUBBER TIRED EXCAVATORS
ROLLERS
PAVERS / ROAD WIDENERS
Contact Marty in Illinois1-800-307-0221
Photos & Detail Descriptions view: www.amstate.com
Page 12 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
AGC of Minnesota Holds Its Fifth Annual Holiday ReceptionAGC of Minnesota held its 5th annual holiday recep-
tion Dec. 1. This free event enables members and theMinnesota construction industry to mingle, meet
new members, build relationships and kick off the holidays. This year, the event encouraged contributions to Toys for
Tots and collected $1,040 and a car full of toys, games andbooks.
For more information, visit www.agcmn.org.
(L-R) are Jerry Rachel of Rachel Contracting; Greg Margarit of Boulay, Heutmaker,Zibell & Co.; Matt Coz of Rachel Contracting; Dave Lyste of Rachel Contracting; andBlake Remmick of Rachel Contracting in St. Michael, Minn.
(L-R) are Tom Sorel, MnDOT; Patrick Hughes andDavid Gehr, both of Parsons Brinckeroff; and TimWorke, AGC of Minnesota. Sorel said, “The annualreception is a great opportunity for contractors tointeract with friends and colleagues from MnDOT andother industry groups on a more casual basis.”
(L-R) are Dale Forsberg, Watson-Forsberg; new mem-ber Dave Bice, Bald Eagle Erectors; Dave Semerad, AGCof Minnesota; AGC Director Mike Welch, UllandBrothers; and Bob Sniegowski, Larson Allen.
The Blue Book Crew of Minnesota (L-R) are Jill Vlihovde, Kevin Douglas, LauraRiley and Jim Harnden.
AGC’s Construction Leadership Council collected toysand money for Toys for Tots at AGC’s HolidayReception. (L-R) are Tony Grazzini, WTG Terrazzo &Tile; Alan Starks, American Agency; Erik Molin, MolinConcrete Products; Rachel Seykora Kanz, Cemstone;John Lewis, Knutson Construction Services; andHeather Grazzini, Carciofini Company.
(L-R): Dan Boerboom of Wells Fargo Insurance; LarryTucker and Valerie McKissack of Allied Electrical &Industrial Supply; and Jim Frisco of FalconCommunications Group enjoying the holiday reception. Temp Air Tech Field Representative Joe D’Valle said,
This is a great holiday party to see customers.”
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 13
USED EQUIPMENT
U.S. Hwy 12 WDassel, MN 55325
NorTrac Bulldozer, Make Offer
320/275-2737 • Toll Free 888/679-4857
Authorized Bobcat® DealerBobcat 440 ................Starting at $4,500Bobcat 463’s ..............Starting at $8,000Bobcat 542B ..............Starting at $6,900Bobcat 642 ..............................$7,500Bobcat 642B ............................$8,500Bobcat 743 ................Starting at $8,000Bobcat 751 ......Several Starting at $9,900Bobcat 753 ..............Starting at $10,000Bobcat 763F, Series, Open Cab ....$11,500
Bobcat 773G, With Heat ............$15,900Bobcat 843, Heated Cab ............$10,000Bobcat 853’s ............Starting at $11,000Bobcat 863C, With Heat ............$12,900Bobcat 863G ............................14,900Bobcat 873 ............................$17,900Bobcat S130, 2006, Heated Cab ......CALLBobcat S185s, With Heat and Air, 500Hours to 5000 Hours....Starting at $14,900Bobcat S250..............Starting at $14,500
Compact Track MachinesBobcat T190’s............Starting at $15,000Bobcat T200..............Starting at $15,000Bobcat T250, Gold ......Starting at $24,500Bobcat T300..............Starting at $25,000Other BrandsGehl 4615 Skidloader, Open Canopy $8,500Mustang 2105 ............................CALLNew Holland L175........................CALLJohn Deere 250/260/320 Models Available..............................................CALL
ExcavatorsBobcat 331’s, Several w/Heat & Open
Canopys ..................Starting at $15,900
Bobcat 334 ................................CALL
Bobcat 337D, A/C, HT................$35,900
Bobcat 341 ..............Starting at $29,990
Bobcat 442 ....Several Starting at $45,000
Large Used Trailer Selection Starting at $1,500wwwwww..ffaarrmmrriitteeeeqquuiipp..ccoomm
Authorized Bobcat® Dealer
NEW M SERIES IN STOCK!
New M Series Skid Steer LoadersNew M SeriesTrack Loaders
V723 Piling Snow S250 w/Snow Blade
New M Series E32Excavators
Skytrak Telehandler,Call for Pricing
Page 14 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Gary Carlson Equipment Shores Up Business in Minn.By Dorinda AndersonCEG CORRESPONDENT
The focus of Gary Carlson Equipment ofSt. Paul, Minn., is simple: provide and installthe newest products to meet the needs inshoring equipment for trench safety, and fol-low that up with exceptional service.
As a small fledgling company, GaryCarlson Equipment believes the key to suc-cess is to meet its customers’ needs and tolook for better techniques to ensure produc-tivity.
“We’re not just trying to push more stuffout the door,” Gary Carlson said, “becausepeople don’t buy trench boxes unless theyneed trench boxes. We try to make sure wehave the right product for each contractor. Ifwe send something to the job site it willwork and they will be happy with it.”
Opening the doors for business in 2003,Carlson is able to provide numerous years ofexperience, since he previously worked withCarlson Equipment, a business his familyowned for almost 50 years, before selling itin 1998. A few years later, after talking withvarious contractors about their equipmentneeds, Carlson decided to venture out on hisown, with the help of co-worker Joe Miller.
“He was willing to roll up his sleeves anddrive the truck when necessary, build trenchboxes and work in the field. As the onlyemployees, we did it all,” Carlson said. Nowwith nine employees, Gary CarlsonEquipment is still running a team that pitch-es in and makes the process work.
Providing trench boxes gave GaryCarlson Equipment its start, but thingsquickly evolved as contractors called foradditional parts. Moving into a new, larger
building one and a half years ago made itpossible for Gary Carlson Equipment tostock a whole range of contractors’ suppliesand equipment from air compressors to largewater pumps and other light equipment.
“We tripled our space by moving aroundthe corner in January 2008. It was great to beable to move at that point,” Carlson said.
Providing service also is a huge part of thebusiness.
“We work carefully with contractors onjob sites to shore up questionable areas. Onesignificant product is the PRO TEC sliderail.
“Even though we’ve done more than 190of those jobs, contractors haven’t so we doonsite consulting and assist with installation,either for crews or contractors who are doingthis application for the first time,” Carlsonsaid. “I think that a key to our success is toget the system in and out quickly for the con-tractors. That is something our people havereally excelled at.”
By focusing on this area of specialty
equipment, Gary Carlson Equipment is ableto service customers in five-plus states.
“We have a much larger inventory ofshoring equipment and pumping pieces thatare taking us to additional areas outside theMinneapolis/St. Paul metro area,” Carlsonsaid. “We’ve done jobs in far northwestNorth Dakota and Joliette, Ill., andDavenport, Iowa.”
Carlson added, “For any business, thechallenges are endless and I think the key toour company’s success has been some great
customers, many who we’ve known foryears; and, to that wonderful upper Midwest‘can-do’attitude that our contractors excel at.If we can help contractors stay ahead ofschedule and under budget it is a win-winsituation.”
For more information, visitwww.garycarlsonequip.com
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG
Dawes Rigging & Crane RentalAppoints Steve Challoner NewEquipment Sales Manager
Dawes Rigging & Crane Rental Inc.added Steve Challoner to its managementstaff as equipment sales manager. Challoner,with 20 years sales experience in the liftequipment and related industries, will workwith Dawes’ statewide sales staff and cus-tomers on new equipment sales.
Challoner comes to Dawes from the GehlCompany’s Mustang ManufacturingDivision in Owatonna, Minn., where heserved as regional sales manager. Previouslyhe was regional sales manager at OmniquipTextron Lull & Sky Trak in Port
Washington, Wis., and a sales representativeat New Reach Corporation/Rental ServiceCorporation Inc. in Waukesha, Wis.
Dawes Rigging & Crane Rental Inc. is amember of the ALL Erection & CraneRental Corp. family of companies. Dawes isa certified dealer of new equipment forBroderson, Elliott, Genie, Gradall, JLG,Link-Belt, Lull, National Boom Trucks,Peiner, Potain, Skyjack, Sky Trak, Snorkel,Shuttlelift and Terex for Wisconsin.
For more information, call 800/236-5335or visit www.dawescrane.com.
Gary Carlson Equipment is located at10720 Mankato Street NE in Blaine,Minn.
Gary Carlson Equipment stocks a wide range of construction equipment forrental and sale.
Steve Challoner is Dawes Rigging and Crane Rental Inc.’s new equipment sales man-ager.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 15
Gary Carlson Equipment:
Your trusted local
source for slide rails
and trench boxes now
stocks a complete line
of construction
equipment and
supplies.
Gary Carlson Equipment Co.
And you thought we just did trench boxes
Equipment
Page 16 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 17
Page 18 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Locations in KS, MO & NE
2005 KomatsuD65EX-15, Cabw/AC, Semi-uBlade, DrawbarNew U/C,Approx. 3100hrs ....$159,500
2003 FuchsMHL MaterialHandler, FrontHyd. Raise andLower Cab,Approx. 10,250hrs ....$289,500
2002 BomagMPH364R,Recycler Drum,Serviced, Readyfor Work ....................$164,500
2005 KomatsuPC300LC-7, Cab,A/C, 60' Longfront 60" ditchcleaning bkt,approx. 4200 hrs,Equip # 80768 ............$234,500
2007 KomatsuWA450-6, Cab,A/C, 6 cu. yd.Bucket, Approx.44430 hrs ..................$179,500
2006 KomatsuPC220LC-8,Cab, A/C, 10'Arm, Approx.1925 Hrs, GPBucket, Exc.Cond ..$129,500
Low Hour NPKHammers forALL MAKESAND ALL SIZES
2005 KomatsuD155AX-5, Cab,A/C, Semi-uBlade, RearRipper, Equip #90909 ............................$239,600
913-371-3822Contact: Doug Mehner / David Mehrtens
Doug’s Cell 913-915-1607email: [email protected]
www.rbused.com
HH Fabrication and Repair19150 Co. Road 20 • Winsted, MN 55395 • 320-485-2341 • Fax: 320-485-2165 • www.hhfab.com • EMail: [email protected]
SNOW BUCKET DIRT BUCKET
ROOT GRAPPLE
SKID STEER
QUICK HITCH
PTO ADAPTER U-BLADE
BUCKET GRAPPLE
HYDRAULIC TREE &
ROOT PULLER
LEVELING BARBACKHOE
PALLET FORK
BUY FACTORY
DIRECT & SAVE
UNIVERSAL TINE GRAPPLEWOOD SPLITTER
POST HOLE
AUGERBIG RIPPER
ROCK BUCKET GRAPPLE INDUSTRIAL TINE GRAPPLE ROCK BUCKET
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 19
LIEBHERR EQUIPMENT IS BUILT TO LAST…
THIS OFFER ISN’T!
CHOOSE YOUR RATE: 0% FOR 36 MONTHS 1.5% FOR 48 MONTHS 2.5% FOR 60 MONTHS
ON SELECT LIEBHERR EARTHMOVING EQUIPMENT
PROGRAM EXPIRES NOVEMBER 30, 2009
SEE YOUR LOCAL LIEBHERR DEALER FOR DETAILS
4100 CHESTNUT AVENUE NEWPORT NEWS, VA 23607 USA PH 757-245-5251 FAX 757-928-8701 [email protected] WWW.LIEBHERR.US
OTHER RATES AVAILABLE SOME RESTRICTIONS APPLY
PROGRAM EXPIRES DECEMBER 31, 2009
SEE YOUR LOCAL DEALER FOR DETAILS
CHOOSE YOUR RATE: 0% FOR 36 MONTHS 1.5% FOR 48 MONTHS 2.5% FOR 60 MONTHS
ON SELECT LIEBHERR EARTHMOVING EQUIPMENT
0% FOR 36 MONTHS1.5% FOR 48 MONTHS2.5% FOR 60 MONTHS
ON SELECT LIEBHERR EARTHMOVING EQUIPMENT
CHOOSE YOUR RATE:
Page 20 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Model Description Impact Class Year Condition Warranty Price
SC22 Hyd. Breaker 550 ft-lbs 2007 New 12 Mo. $4,250125SX Hyd. Breaker 1,000 ft-lbs 2003 Fact. Rebuild 6 Mo. $6,900V32 Hyd. Breaker 5,000 ft-lbs 1999 Fact. Rebuild 12 Mo. $30,700
Cash for Clunkers Details: Trade in your used 5,000 or 7,500 ft-lb breakerfor a credit towards the purchase of the V1200 or V1600 below
V1600 Hyd. Breaker 7,500 ft-lbs 2003 Fact. Rebuild 6 Mo. $33,000V1600 Hyd. Breaker 7,500 ft-lbs 2004 Fact. Rebuild 6 Mo. $34,000V1600 Hyd. Breaker 7,500 ft-lbs 2004 Fact. Rebuild 6 Mo. $35,000V1600 Hyd. Breaker 7,500 ft-lbs 2005 Fact. Rebuild 12 Mo. $38,000V1600 Hyd. Breaker 7,500 ft-lbs 2006 Fact. Rebuild 12 Mo. $39,000V46 Hyd. Breaker 7,500 ft-lbs 2005 Fact. Rebuild 12 Mo. $46,400V56 Hyd. Breaker 12,000 ft-lbs Fact. Rebuild 12 Mo. $63,500V65 Hyd. Breaker 15,000 ft-lbs Fact. Rebuild 6 Mo. $120,000
Also Available
PRT-180Rotating Pulverizer 2008 Used, As Is 6 Mo. $27,000MTP-200 Multiprocessor with 2008 Used, As Is 6 Mo. $38,000
Concrete Cracker Jaws
For more information, please contact your Tramac Dealer or Customer Service
at (866)[email protected]
WHILE SUPPLIES LAST
TERRIFIC VALUES ON REMANUFACTURED TRAMAC BREAKERS
6 MONTH WARRANTY INCLUDED
SUBSTANTIAL CREDITGIVEN FOR YOUR OLD
5,000-7,500 FT. LBBREAKER
Rep. Oberstar Visits TerexFacility in Grand Rapids
Terex welcomed Congressman JimOberstar (D-Minn.), chairman of the HouseTransportation & Infrastructure Committee,for discussions and a facility tour at its com-pact equipment manufacturing facility inGrand Rapids, Minn., on Nov. 30.
The visit was the result of an invitationfrom Terex. It provided both an opportunityfor the Congressman to learn more aboutconstruction equipment made in his Districtand for Terex to thank him for his leadershipin seeking reauthorization of surface trans-portation programs legislation known inWashington as SAFETEA-LU and mostoften in the construction industry simply as“the Highway Bill.” The legislation willexpire Dec. 18 without furtherCongressional action.
“The economic downturn has had a sig-nificant impact on our business,” said LisaWalsh, general manager of the TerexConstruction Americas facility in GrandRapids. “We are positioning ourselves tokeep and grow jobs here in Grand Rapidswith lean manufacturing practices, but wecan’t do that unless there is a market recov-ery. We greatly appreciate CongressmanOberstar’s leadership on transportation infra-structure investment and are extremelypleased he came to meet with us and see ourfacilities.”
“Chairman Oberstar knows that theHighway Bill is vital to employment in theconstruction equipment industry and forconstruction contractors nationwide and wethank him for his leadership,” Walsh added.
The construction industry, which includesmanufacturing, distribution and equipmentservice, has been hard hit by the recession —as much as 8 percent of all job loss duringthe recession, according to an IHS GlobalInsight study. The Associated EquipmentDistributors (AED) and Association ofEquipment Manufacturers (AEM) sayuncertainty surrounding new federal trans-portation program funding, coming on top ofthe most severe downturn seen since the endof World War II, seriously endangers thelong term health of the industry.”
Tim Mathews, co-owner ofMechanicsville Rental Center and PowerEquipment in Mechanicsville, Va., a Terexcompact equipment distributor, recently par-ticipated in the Start Us Up USA! campaignequipment caravan and rally on the NationalMall in Washington, D.C., organized byAEM and AED. The event was staged toemphasize the 550,000 jobs lost in the con-struction industry and to encourageCongress to reauthorize the Highway bill.
“Infrastructure development and mainte-nance accounts for a large part of our coun-try’s economic recovery,” said Mathews. “Anew surface transportation programs bill willhave a positive effect on our economy — itcreates work for construction contractors,which leads to jobs and investment in newequipment. This bill is the best way to jump-start the entire construction industry.”
For more information about Terex prod-ucts and services, visit: www.terex.com.
(L-R) are Joe Krider, Del Carver and Lisa Walsh of Terex and Jim Oberstar, chair-man of the House Transportation & Infrastructure Committee.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 21
WHEEL LOADERS 2004 Komatsu WA250PT-5L, AC, QC, 6316 hrs, 3rd valve, 3 yd..............$61,9002007 JD 544J, AC, 10,175 Light Duty Hrs, new tires & paint, Nice! ..........$62,9002006 Case 621D, Cab, A/C, Heat, JRB QC, 2.5 yd, new tires& paint ........$57,5002005 Cat 906, A/C, 2031 hrs, QC bkt & forks, new paint, Nice!..................$41,5001994 Case 621B, C/H, 8712 hrs, 2.5 yd. bkt, New Paint & tires ................$39,9001998 JD 444H, cab, AC/heat, 12,218 hrs, QC w/2.5 yd bkt, Sharp! ..........$39,9501994 Case 721B, A/C, 4022 Hrs, QC, RC, 20.5R25-70%, New Paint........$59,9501999 Case 721C, Cab, Heat, 3yd, 20.5x25, Very Clean, runs our exc ......$49,500
LOADER BACKHOES & SKIP LOADERS2007 CASE 570M XT, 297 hrs, AC, 4WD, Ride CTL, Turbo, 3 pt, bld ........$46,9002005 JCB 214, C/H, 4x4, E-Hoe, Pilot Ctls, 919 hrs, 36” bkt., 3rd valve & Q/C to
front bucket, (4/1 bkt avail), 50% tires, Like New Condition ........................$41,5002005 Case 590SM II, cab, heat, std hoe, 4x4, 2888 hrs, X Sharp! ............$41,5002005 Case 580SM II, cab, heat, 4x4, Ext. hoe, pilot cntrls, 4/1 bkt, 3372 hrs ..Call1969 Ford 3500 IND, w/loader, 3 pt, r. counter weight, big snow bkt ..............$3,950
EXCAVATORS2000 Cat 325BL, AC, 5,119 hrs, aux hyd, sharp, local one owner ............$66,9002003 Cat 315CL, C/AC/H, 5021 hrs, 48” Bkt, V. Sharp & Tight! ................$57,5001996 Cat 320BL, C/AC/H, 8100 hrs, QC w/48” Bkt, 24” bkt avail ..............$49,5002003 Cat 311 CU, AC, 1894 hrs, zero turn, 34” bkt, Tight, Nice! ..............$43,7502003 Komatsu PC120-6E0, C/AC/H, 2380 hrs, plumbed, V Sharp! ..........$47,9001996 JD 590D, 6738 Hrs, Exc. U/C, 8'6" wide, Q/C w/36” bkt. Sharp! ......$32,5002001 Komatsu PC78US-5, A/C, 3738 hrs, rubber pads, new paint............$27,9002000 Bobcat 334 Mini, 928 hrs, Exc. Rubber Tires, Tight & Sharp! ..........$15,900
CRAWLER DOZER/LOADER2004 JD 755C, CRL. LDR., AC, only 1631 Hrs, one owner, new uc ..........$84,9002006 JD 650J, A/C, 6-way, 2736 hrs, super nice ..............................................Call2000 JD 450H LT, cab, AC, 6 way, 2275 hrs, 75% UC, Very Sharp! ..........$37,9002000 JD 450H LGP, 3990 hrs, new UC, new poly paint..............................$34,9002000 Cat D3C XL, hystat, cab, heat, new Cat UC, 4110 hrs, Nice! ............$29,9501999 Komatsu D39E, 2545 hrs, 6 way, 85% uc, new paint, V. Good! ......$28,9001995 JD 550G IV, 6 way, 2703 hrs, 2 owners, 90% UC, Very Nice ............$28,5001979 JD 750, cab, heat, str. blade w/tilt, low hours, 80% uc, Clean! ..........$23,9101991 JD550G, 6 way, 85% UC, new poly paint, Tight & Nice! ....................$21,9001997 Cat D4C, 6 way, 3652 hrs, 60% UC, Very Clean! ..............................$22,5001986 Case 450C, 6 way, 4674 hr, recent new UC and Paint, Exc! ............$17,500
SKID STEERS & FORKLIFTS2004 Case 40XT, cab, heat, 925 hrs, aux hyd, 65% tires, Sharp! ..............$15,9001990 Case 1845C, OROPS, 4208 Hrs, 72" bkt, 90% Tires, Good................$8,9952005 JCB 506C, 1250 hrs, 6000 lb, 36’ reach ht, 90% tires, like New ......$28,9002005 Sky Trak 6042, 1700 hrs, 4WD, 42’ reach, 70% tires, tight, Nice......$29,7502000 Sky Trak 8042, 8000 lb, 42’ reach, 4675 hrs, 80% tires, Exc! ..........$25,9002000 JCB 506C, 6000 lb, 42’ reach, 3500 hr, good tires, Exc Cond!..........$19,5001998 JCB 930, 4x4, 6000 lb, 21’ strt mast w/side shift, Very Nice! ............$18,950
BOOM/MAN LIFT1999 JLG 450A, Genie Z45/25J, 50' art. boom, dual fuel, 4x4, Nice..........$15,9001999 JLG 600S, 4x4, 60' straight boom, 3800 hrs, dual fuel, Nice! ............$18,500
COMPACTION2004 IR SD45D, 54" smooth drum, only 490 hrs, very sharp......................$26,950
(SEE WEBSITE FOR PHOTOS)
2007 John Deere544J
AC, 10,175 Light Duty Hrs, New Tires & Paint, Nice................$62,900
Visit: www.hulls151.comfor Complete Inventory & Photos
HULL’S IMPLEMENT920-324-5341www.hulls151.com
Jct. Hwy 151 & 26 N.E. of Waupun, WI
Contact Ted Rose or Tim Luby636-343-9970www.lubyequipment.com
MO: Saint Louis, Cape Girardeau, O’FallonIL: Quincy, Caseyville, Springfield
AR: Fort Smith
RENTAL REDUCTIONS*Buckets Sold Separately*
LOADER BACKHOES
2005 CASE 580SM-IILOAD/BH - CAB,AC, HEAT,4X4, A-HYD, X-HOE, PILOT-C,OPS CONV PAC, F-PADS, D-BATT, GOOD CONDITION,820 HOURS, SAINT LOUIS,MO (39276R) ..........$51,000
2005 CASE 590SM-IILOAD/BH - CAB,AC, HEAT,4X4, A-HYD, X-HOE, PILOT-C,RIDE-C, OPS CONV PAC, D-BAT, GOOD CONDITION,1815 HOURS, SAINT LOUIS,MO (39382R) ..........$45,000
DOZERS
2006 CASE 550H LGPDOZER - ROPS, 110”-B, PAT,26”-GR, R-SCREEN, GREATCONDITION, 590=H, ST.LOUIS, MO (42623R)$49,000
MINI EXCAVATOR
2005 CASE CX47 MINIEXCAVATOR - 10.4K, ROPS,AUX. HYD., 15'7"-RUB-T, C-SWING-B, ZERO-TS, C-CHANGE, BF-BLADE, 11'11"DEPTH, BUCKET SOLD SEP,810 HOURS, CAPEGIRARDEAU, MO (42646R) ....................................$23,000
LOADERS
2005 CATERPILLAR 963C -
CAB,AC, 43K, 100"-3.5-CU/YD,
22" PADS, GOOD CONDI-
TION, 2465 HRS, ST. LOUIS,
MO (39648R) ..........$125,000
2005 CASE 1850K (SERIESII) - CAB,AC, SEMI-U, 134"
BLADE, 24" PADS, COLD
START, CUMMINS, 190HP,
GOOD CONDITION, 1590
HRS, O’FALLON, MO
(39119R) ................$120,000
TRUCKS
2006 CASE 340B HAULTRUCK - CAB,AC, HEAT, 6X6,
79.366LB PAYLOAD, 456HP,
29.5XR25, BACKUP ALARM,
COLD START AID, 63,900
LBS, GOOD CONDITION, 850
HRS, ST. LOUIS, MO (42906R)
..............................$220,000
ROLLERS2003 CASE SV210 ROLLER -
ROPS, 66"-SHEEPSFOOT,
20,000LBS, SINGLE DRUM,
99HP, 35,970LBS OF C-
FORCE, ARTICULATED,
BACK UP-A, 14.9X24, GOOD
CONDITION, 1295 HOURS,
ST. LOUIS, MO (36254R) ........
................................$38,000
TELEHANDLER
2005 TEREX TH636C TELE-HANDLER - ROPS, 6,000LB-CAP, 4X4, 4WS, 48" FORKS,DEERE TURBO, 99HP, 48"CAR, 36' MAX-L, 21' MAX-R,13X24/FOAM, GOOD CON-DITION, 4420 HRS, CAPEGIRARDEAU, MO (40173R) ....................................$16,500
2005 TEREX TH844C -ROPS, 8000 LB, 4X4, 4WS, 48”FORKS, DEERE TURBO, 99HP,72”-CAR, 13X24/FOAM,22,930 LBS, GOOD CONDI-TION, 4545 HOURS, HEBERSPRINGS,AR (38623R) ..........................................$19,500
LOADER BACKHOES
1998 NEW HOLLAND 2120AGG LOADER - ROPS, 4x4, REG-HOE, 3-POINT HITCH / PTO, 60"-LOADER, Q-ATTACH, 24"-&-24"-BH BUCKETS, 1060-H, GREATCONDITION, SPRINGFIELD, IL(45274) ..........................$19,200
2001 CASE 580 SUPER M L/BH- CAB,A/C, 4X4, X-HOE, RIDE-C,TWO LEVER, BUCKET-CPL, F-PADS,TIRES / GOOD, 24”TOOTH, GOOD CONDITION,5605 HRS, ST. LOUIS, MO (45576)......................................$43,400
1983 CASE 580E L/BH - CAB,4X4, X-HOE, 2-STICK, D-PADS,AMULET THUMB, 30" SMOOTH,(18"&24" TOOTH), FAIR TIRES,GOOD COND.,APPROX 4500HOURS, QUINCEY, IL (47815) ............................................$13,600
ROLLERSSUPERPAC 400P ROLLER -ROPS, 40"-PAD FOOT W/ KNOCKDOWN BLADE, DIESEL, GOODCONDITION, QUINCEY, IL(46864) ............................$5,400
EXCAVATOR2006 CASE CX210 EXCAVA-TOR - 46K, CAB,AC, HEAT, 32"STEEL,AUX HYD, C-CHANGE,A-GREASE, RADIO, BUCKET SOLDSEP, 21'5" DEPTH, 32'1" REACH,GOOD COND., 1010-H, ST.LOUIS, MO (47616) ....$105,600
LOADERS1994 BOBCAT 753 LOADER -ROPS, FOOT--C, 43.5HP, 10X16.5-GREAT, 60” TOOTH, 4740 LBS,GREAT CONDITION, 1660-H,CASEYVILLE, IL (47687) ..$8,300
2005 CASE 450 LOADER -ROPS,TIER-II, 88HP, FOOT-T,RIDE-C, 12X16.5/ GOOD, BUCK-ET COUPLER, 82"-TOOTH,W/BOE, GOOD CONDITION, 595HOURS, QUINCEY, IL (46653) ............................................$26,500
2005 CASE 450 LOADER -ROPS,TIER II, 88 HP, FOOT-T,COLD START, 8,830LBS, 73"-TOOTH, GOOD CONDITION,560 HRS, QUINCY, IL (47523) ............................................$23,600
1996 CASE 1840 LOADER -ROPS, HAND-T, 10X16.5/GOOD,63"-TOOTH, 54 HP, 5560 LBS,GOOD CONDITION, 1890 HRS,ST. LOUIS, MO (47206) ..$11,100
MISCELLANEOUS
1995 RAYCO RG1625 STUMPGRINDER - TRAILER,GOODTEETH,GAS,ANTI CREEP,205-H,GOOD COND., ST.LOUIS,MO(45249)................................$7,000
PRE OWNED
Page 22 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Caterpillar, Illinois Dealers WelcomeIAAP Members to Safety Seminar
Caterpillar Corporation and its dealers serving theIllinois market pulled out the wheel chocks to wel-come IAAP members for the Heavy Equipment
Safety Seminar on Nov. 3 and 4 in Peoria, Ill. The chance to operate numerous heavy equipment simu-
lators turned out to be the event’s highlight. Representativesfrom Altorfer Inc., Fabick CAT and Patten Industries Inc.welcomed guests to the Caterpillar Edwards Demonstrationand Learning Center.
Between safety topic sessions, Caterpillar experts tooktime to show a range of tasks their equipment could accom-plish inside the demonstration arena. The event included a385C excavator, a 914G wheel loader, a 740 articulatedtruck, 772 and 777F off-highway haul trucks, a 988H wheelloader and a D11T track-type tractor.
In addition to Caterpillar, Bridgestone and DBA-SALAhad much to say about heavy equipment safety.
For more information, visit www.Safety.Cat.Com.
Caterpillar experts took time to show a range oftasks their equipment could accomplish inside thedemonstration arena.
Ken Edwards, Cat global mining marketing divisionmanager, let everyone know that the company is com-mitted to designing safety and sustainability into allof its products.
The event included a 385C excavator, a 914G wheelloader, a 740 articulated truck, 772 and 777F off-highway haul trucks, a 988H wheel loader and aD11T track-type tractor.
Caterpillar Corporation and its dealers serving theIllinois market pulled out the wheel chocks to wel-come IAAP members for the Heavy Equipment SafetySeminar on Nov. 3 and 4 in Peoria, Ill.
Gerry Nichols, senior engineering manager, ofBridgestone addressed safety and longevity in hisprogram.
A D11T track-type tractor moves dirt for an enthusi-astic crowd.
Valerie Cantrell, customer safety service consultant,explained the company’s goals to provide individu-alized training and coaching for environmental,health and safety concerns.
Brian Sims, senior product demonstrator, now worksfor Caterpillar after many years in the mining indus-try. He took time to drive equipment during the demoand to address safe operating practices.
The event included a 988H wheel loader pouring dirtinto a 772 off-highway truck.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 23
KR1CUWF0008N-00231728
RDO Equipment Co.Burnsville, MN
Matt Dull952-890-8880 • [email protected]
Randy Thorstad13725 Main Street • Rogers, MN 55374
Cell: (612) 840-3464 • Office: (763) 428-4107Fax: (763) 428-2700
email: [email protected]
ROGERS & LONG LAKE, MN
Don’t be fooled by imitators. Thirty-plus years’ experience building the best hydrostatic dozers makes John Deerethe brand for you. Innovations, like Total Machine Control (TMC), allow operators to customize machine response and operation to their personal preferences. J-Series Dozers deliver unsurpassed productivity and uptime, along with the lowest possible daily operating costs.And that’s just for starters.
To learn all about John Deere J-SeriesDozers, give us a call.
Contact us soon.
Faster cycles. Higher productivity
Contact us soon.
Announcing less of a good thing.Need a smaller track loader with bigperformance? Meet the John DeereCT315. It's lightweight and agile, yet itpacks 45 turbocharged horses into itssmall frame to deliver best-in-classstability, breakout force, visibility, andwide-open service access. It's a snapto transport between jobsites, too.And, with numerous availableWorksite ProTM attachments, there'sseemingly no end to the work you'llget done. Stop in and see the bigpossibilities this small machine canbring to your business.
Page 24 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Tire Size Brand Type Qty Price
17.5-25 Firestone 12ply 4 $374
17.5-25 Goodyear 12ply $400
17.5R25 Michelin XHA 17 $1,056
17.5R25 Bridgestone VUT 4 $715
20.5-25 Firestone L3 24ply 4 $1,000
26.5-25 Firestone L3 20 ply $2,145
26.5-25 Goodyear L3 20ply $2,200
26.5-25 Bridgestone L3 20ply $2,365
29.5-25 Firestone L3 22ply $2,723
35/65-33 Firestone L5 30ply 16 $5,700
35/65-33 Bridgestone L5 42ply 4 $10,000
35/65-33 General L5 42ply 4 $7,000
35/65-33 General L5 Smooth 4 $7,112
42ply
875/65R33 Goodyear $9,020
3% Surcharge for Credit Card Purchases
SOLDOUT!
SOLDOUT!SOLDOUT!SOLDOUT!SOLDOUT!
SOLDOUT!
Apprenticeship Programs EyeBuilding Lifetime CraftspeopleBy Giles LambertsonCEG CORRESPONDENT
A dynamic apprenticeship program willnot by itself save the U.S. constructionindustry from a looming shortage of skilledlabor, but it is “one of the pieces of the puz-zle” to stabilizing the labor situation, sayindustry leaders.
Unions, contractors and associations oper-ate apprenticeship programs mostly to teachtrade skills. However, they also hope the pro-grams will swell the ranks of craftspeopleand retain their workplace allegiance for alifetime. The ultimate goal of every appren-ticeship program sponsor in the country is toboost both the quality and quantity of trainedconstruction laborers. How they pursue thiscommon objective differs in a variety ofways.
To produce skilled workers in such fieldsas carpentry, cement masonry and construc-tion laborer, contractors in the MasterBuilders’ Association of WesternPennsylvania mostly work through tradeunions. It is an association that goes back along ways: the Master Builders’Association— a founding member of AssociatedGeneral Contractors — and the carpentersunion both date from the 1880s.
The success of apprenticeship programsin Pittsburgh is evident in the new $13 mil-lion training center of the Carpenters JointApprenticeship and Training Program.Ground was broken a year ago for the center,which sits adjacent to the carpenters’ head-quarters. The 93,000-sq-ft. facility is state ofthe art, according to Jon O’Brien, MBA’sdirector of communications.
“Anything you can think of that willenhance training they have incorporated intothe building.”
The four-year apprenticeship trainingincludes 144 hours of annual classroomwork and at least 4,000 hours of on-the-jobtraining over four years. If an apprenticecompletes the rigorous instruction and pass-es the muster of his supervisors, a designa-tion of journeyman carpenter is his reward.
In addition, the certificate of carpentryapprenticeship is transferable to theCommunity College of Allegheny Countyfor 30 credits, which can be applied towardan associate degree in building constructionestimation or supervision.
Approximately 1,000 students enroll eachyear in carpenter and laborer apprenticeshipprograms. O’Brien said he is pleased to see
more qualified people being attracted to theprograms, which he attributes to current eco-nomic conditions.
“Jobs are hard to come by and a lot ofyoung people are looking toward the trades,”he said. “We are looking at the quality of theapplicants going off the charts, many ofthem just out of college.”
He said the typical applicant to the pro-gram used to be 28 to 29 years of age. Nowpeople entering the program are in the 25-year-old range.
“I think they will be in for the long term,too. Right around the mid-20s a lot of youngpeople are starting families. They want ben-efits and the unions are a viable option.”
Still, local contractors realize that thelong-term trend for the industry labor pool isnot good, with more skilled people retiringthan are entering the trades. To address theproblem, some of the unions in westernPennsylvania are changing pension rules. Itused to be that working 30 years or reachingage 55 was sufficient tenure to earn 100 per-cent pension benefits. Last year, the figureswere adjusted to 35 years or age 62.
“This is one way they tackle the issue,”O’Brien said. “I think it is a pretty nice littleBand-Aid. Hopefully, it will give young peo-ple an opportunity to assume leadership onthe job site.”
Landau Building Company, a Pittsburgh-area fixture in the contracting industry formore than a century, is an active participantin the Master Builders’ Association appren-ticeship effort. Carpentry and laborerapprentices are employed by Landau, as wellas co-op students from area schools includ-ing the University of Pittsburgh.
“We definitely see the value of the appren-ticeship programs,” said Jen Landau, a proj-ect manager at the company and a memberof the MBA Young ConstructorsCommittee. “We have a lot of apprenticeswho have spent all four years working forLandau and become journeymen. We haveone right now who is going through superin-tendent training.”
Landau said apprentices are welcomedinto the workplace by their more establishedpeers in the workforce, as well as by man-agement.
“There has been talk in the past how theolder generation of carpenters hasn’t beencooperative, saying ‘This guy just wants totake my job.’ But I have never seen that per-sonally and I believe the more experienced
see APPRENTICESHIPS page 48
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 25
ROCKLAND MANUFACTURING CO.800-458-3773
DEDICATED TO INCREASING PRODUCTIVITYDEDICATED TO INCREASING PRODUCTIVITY
MORE POWERFUL THANA THUMB OR GRAPPLE!
THINK ABOUTTHE POSSIBILITIES
Ideal for Demolition and Land Clearing• Rugged Bucket Digs and Loads• Wide, See-Through Clamp• Easy, Low Cost, No Weld Installation • Perfect for Multi-Machine Fleets
Learn More! www.rocklandmfg.com/kk
Albert MedcalfOffice: (502) 456-4050Cell: (502) 592-6510
Martin McCutcheonOffice: (614) 824-9162
2006 HitachiZX160LC, S/N1F1Q-006331 with 1,210 hours;Isuzu Engine, A/C,Heat, 16'10"Boom; 10'2" Stick;Bucket$85,000
2000 KomatsuWA250-3, S/NA78003 with5,072 hours$70,000
2000 Volvo A40,S/N 60536 with8,639 hoursCall For Pricing
2006 Volvo BL70, S/N 10992 with2035 hours; VolvoEngine; ExtendedStick; Heat; A/C$65,000
2003 HitachiZX200LC
S/N ARH-310232with 4623 hours;
Bucket; AM/FMRadio; 9'7" Stick
$80,000
2004Euclid/Hitachi
EH1000S/N 77254 with
4378 hours;Heated Bed; 65
Ton Bed$525,000
1998 Volvo L330C
S/N 60414 with22788; Volvo
Eninge; A/C; BoomSuspension; Spade
Nose Bucket$115,000
2004 Volvo L110E S/N 60237 with
21603 Hours;Volvo Engine; A/C;
Heat; BoomSuspension; Solid
Tires; JVC CDPlayer
$100,000
Construction Equipment
Guide Special Pricing...
Say You Saw it in CEG!
END OF YEAR REDUCTION!
www.ruddequipment.com
1990 GroveRT528C,S/N 74355 with7838 hours,Cummins Engine;PAT Computerwith Anti TwoBlock; 28'-70'Boom; 23'-43' JIB$87,000
2004 Cat 140H S/N 00640 with5692 hours; Cat
Engine; Work Lights;Cab Fans; AM/FM
Stereo; 14'Moldboard; Air
Dryer$150,000
Page 26 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDEervice
serv
ice
se
rvic
eservic
e
se
What goes around comes around.The best measure of a crane company is how they stand behind
their promises ... to their customers, their suppliers, and their
manufacturers.
At ALL, we stand behind every piece of equipment with timely
support, service, and parts. We continually invest in our peo-
ple, our fleet of equipment, and training. And with branches
throughout North America, we’re there when you need us.
Because that’s what you expect from a leader.
We have a yard nearby. Call 800-232-4100 or go to:www.allcrane.com/Locations.aspx
© ALL Erection & Crane Rental Corp., an Equal Opportunity Employer
Phone: 502-493-4380Fax: 502-499-3180
Used EquipmentCOMPACTION'04 Ingersoll Rand SD77DX, 1100 Hrs w/Padfoot Shell Kit, C0354 ........$30,800
‘05 Ingersoll Rand SD77DX, 1100 Hrs w/Padfoot Shell Kit, C0436 ........$30,800
‘08 Hamm 3410, 659 Hrs, C0561 ..............................................................$63,800
DOZERS'06 Komatsu D37EX-21A, w/EROPS, 6-Way Blade, 600 Hrs, BT8012 ................
....................................................................$75,000 NEW SALE PRICE $50,200
'06 Komatsu D155AX-5B, EROPS, SU Blade, 2500 Hrs, C0457 ..........$231,000
‘02 Komatsu D275AX-5, EROPS, SU Blade, 12,000 Hrs, C0539..........$209,000
‘05 Komatsu D61PX-15, EROPS, Str Blade, 4000 Hrs, C0392 ..............$71,500
‘04 Komatsu D65EX-15, OROPS, Semi U, #C5148 ................................$77,000
‘07 Komatsu D41EX-6, OROPS, 6-Way Blade, 1000 Hrs, C0497 ..........$53,900
‘05 Komatsu D39EX-21A, OROPS, 6-Way Blade, 2500 Hrs, C0385 ......$35,200
EXCAVATORS‘04 Komatsu PC138USLC2, Cab, 2800 Hrs, Less Bkt, C5162 ................$46,200
'08 Komatsu PC160LC-7, w/Cab, AC, Hyd Thumb, Low Hrs, BT9402 ....$90,000
‘04 Komatsu PC200LC7, Cab, 3200 Hrs, Less Bkt, C0226 ....................$61,600
‘04 Komatsu PC300LC7, Cab, 5400 Hrs, Genesis Shear, C0238 ........$242,000
‘04 Komatsu PC300LC7, Cab, 5200 Hrs, Genesis Shear, C5207 ........$242,000
‘04 Komatsu PC400LC6, Cab, 3600 Hrs, Less Bkt, C5304 ....................$99,000
‘04 Komatsu PC400LC6, Cab, 4100 Hrs, Less Bkt, C5303 ....................$99,000
‘04 Komatsu PC400LC7, Cab, 4800 Hrs, Less Bkt, C5218 ....................$93,500
TRUCKS‘04 Komatsu HM400-1, #C0209..............................................................$104,500
‘04 Komatsu HM400-1, #C5146................................................................$99,000
'05 Komatsu HM400-1 w/ 6000 hrs 40 ton artic truck, BT8814..............$135,000
Please call or check out our Web site for our Certified Rental
Fleet Reduction Sale!
PIL
E
FOUNDATION EQUIPMENT• Rental • Sale • ServiceBAUERDAWSONPILECOHPSI
IHCKLEMMVULCANBERMINGHAMMER
Air, Diesel & Vibratory Pile Hammers andAccessories Complete Auger & Tieback
System Drills & Accessories
EQUIPMENT CORPORATION OF AMERICA
1-800-PILE-USAwww.ecanet.com
• Pittsburgh • Philadelphia • Washington, DC • Toronto
80+ Years Experience
This public service announcement is sponsored by Construction Equipment Guide.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 27
PRE-OWNED, JOB READY EQUIPMENT NOW AVAILABLE!Call Brad Kent @ 513-266-7761 • Stop in or visit bobcat-ent.com for more information
2007 T190 Bobcat Track Loader102 Hrs, Gold Package, ACS controls,
c/n 76072 $32,500
2001 331 Bobcat Excavator1200 Hrs, HVAC, Cab, Thumb, c/n 74799
$21,000
2003 763 Bobcat Loader1900 Hrs, Ready to Work, c/n 76058
$10,500
2004 S150 Bobcat Loader1430 Hrs, Ready to Work, c/n 75053
$14,500
2006 T250 Bobcat Track Loader1645 Hrs, Advanced Hand Controls, c/n 75676
$22,000
OR CALL BRAD ON OUR USED EQUIPMENT HOTLINE: 888.BOBCATS
USED SKID-STEER LOADERSYear Model Description Stk# Price2005 MT52 320 Hrs, Ready to Work 75674 $11,0002004 S150 910 Hrs, Ready to Work 72315 $15,0002004 S160 865 Hrs, Ready to Work 74781 $16,0002005 S175 1357 Hrs, Ready to Work 74819 $14,5002002 S185 1035 Hrs, Gold Package 71429 $19,0002007 S185 1565 Hrs, Gold Package 68014 $22,0002003 S300 Only 350 Hrs, HVAC Cab 75250 $28,0002005 T190 1200 Hrs, Cab & Heat 72928 $23,5002007 T300 1320 Hrs, Gold Package 66439 $39,000
USED EXCAVATORSYear Model Description Stk# Price2004 316 850 Hrs, Open ROPS 47864 $8,9002004 322 1100 Hrs, Open ROPS 51789 $14,9002007 430 980 Hrs, HVAC Cab 74260 $26,5002003 341 750 Hrs, HVAC Cab 43549 $29,000
USED ATTACHMENTSModel Description Stk# Price709VS Backhoe 9’ Dig Depth 73873 $5,00084” Solid Conditioner Hydrauic Angle 75272 $4,25014” Planer Standard Flow 33766B $5,900B950 Breaker Skid Steer Mount 75583 $5,250
Parts • Sales • Service • Rental • Training
Cincinnati • Mt. Orab • Columbus • Lexington • Louisville
Page 28 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Illinois-based “D” Construction works on the 800,000-sq.-yd. (668,900 sq m) intermodular project at the com-pany’s rail yard in Joliet, Ill.
An additional GOMACO GP2800 on the job is fed bytwo GOMACO GT9500 placers.
Finkbiner Equipment Co. Sales Representative ChadCailteux (L) and “D” Construction Inc. ConcreteForeman Darin London stand in front of the GOMACOGP2800 concrete paver.
Ill. Contractor Leads $150M Rail Yard Project in Joliet
the company’s rail yard in Joliet, Ill.“The PCC costs approximately $40 mil-
lion and the aggregate portion that we areconstructing on the project is more than$150 million,” Bill Savoree, project superin-tendent of “D” Construction said. “Thebiggest challenge this year has been theabove normal rainfall. So we’re really gladwe purchased the polyroll attachment for ourtexture cure machine.”
To tackle such a large project, “D”Construction called on Finkbiner EquipmentCo. for back up.
Finkbiner, a GOMACO dealer, suppliedthe contractor with three GOMACOmachines to work on site — a TC-600 tex-ture/cure machine, a GHP-2800 4-trackslipform paver and a Integrated Dowel BarInserter (IDBI), which attaches to theGOMACO GHP-2800.
The purchase was completed on April 10and the machines were delivered fromGOMACO in Ida Grove, Iowa, the lastweek of August.
“For the project we purchased a newGOMACO 2800 4 track with compact IDBIand a GOMACO TC600 through ourGOMACO dealer Finkbiner Equipment,”Savoree said. “We also purchased a LMGSthrough Leica Geosystems to enable us topave without stringlines. We are placing theaggregate with a JD blade and dozer usingGPS and bring the stone to final grade usingan asphalt paver, which is also running offthe Leica stringless system using robotictotal stations.”
“D” Construction installed a 10-in. (25cm) aggregate base over lime modified soil.
Then, the contractor placed jointed con-crete pavements ranging in thickness from 8
(L-R) are Bill Savoree, project superintendent of “D” Construction; Todd Sandeno,vice president of “D” Construction; Chad Cailteux of Finkbiner Equipment Co. Inc.;and Ken Sandeno Jr., vice president of “D” Construction Inc. in Coal City, Ill.
At the controls of this GOMACO GP2800 concrete slip form paver is “D”Construction Inc. Foreman Darin London.
“D” Construction placed 225,000 cu. yds. (172,000 cu m) of concrete and 450,000tons (408,000 t) of stone. see RAIL page 46
RAIL from page 1
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 29
100's more items on our website: www.larsonimplements.com
Cambridge, Minnesota(763) 689-1179
2005 John Deere 644J Wheel Loader,w/JRB quick coupler, 2860 hrs........$99,000
2006 Cat 938B Series II, 3600 hrs ......$81,0002005 Cat 930G Series II, 2425 hrs........$75,0002006 Cat 950H, 2032 hrs ....................$140,0002006 Komatsu 320PT-5, tool carrier, 3600 hrs ..................................................................$75,000
Shooting Boom ForkLifts2005 Cat TH460B, Cab, Heat, Outriggers............................................................................$39,5002005 Mustang 642, Cab, Heat, 632 hrs $35,0002002 JLG G642A, Cab, Heat, 2659 hrs ..$25,000
2000 Ford F650 Service Truck, Cat, 7 spd,5000 lb crane ..................................$27,000
2005 Ford F650, Cummins Auto Crane2002 Ford F550, Dsl 7.3 Crane2000 FL70 Cat, Auto Crane
2006 John Deere 700J Dozer, 30" pads,Cab, Air, 6 Way, 1900 hrs ................$78,0002005 John Deere 650J XL, Cab, Air, 6 Way,2950 hrs ................................................$55,0002005 John Deere 750 LGP, Cab, Air, 4085 hrs....................................................................$85,0002005 John Deere 850J LGP, Cab, Air, 2300 hrs................................................................$105,000
PLEASE CALL DOUG MEHNEROR DAVID MEHRTENS
(913) 371-3822
2006 Bomag BC1172RB2006 Bomag BC1172RB
Trash Compactor, Dealer Serviced & Maintained Ready togo to Work, $339,000
Page 30 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Allis-Chalmers HD41 Crawler Dozer, 1:25 Scale ............................................................$190Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ................................................................$80Bell B40D Articulated Truck, 1:50 Scale ............................................................................$50Bobcat A300 Wheel Loader, 1:25 Scale ............................................................................$55Bobcat S175 Skid Steer Loader, 1:50 Scale ......................................................................$18Bobcat M610 Golden 50th Anniversary Skid Steer Loaer ................................................$50Bobcat Tractor/Trailer Set, 1:50 Scale................................................................................$80Case 721D Wheel Loader, 1:87 Scale ..............................................................................$20Case 340 Articulated Truck, 1:87 Scale..............................................................................$20Case CX 330 Excavator, 1:87 Scale ....................................................................................$20Caterpillar No. 12 Motor Grader, 1:87 Scale ....................................................................$25Caterpillar 140H Motor Grader w/ripper & scarifier, 1:50 Scale ......................................$40Caterpillar CS-563 Soil Compactor, 1:87 Scale ................................................................$25Caterpillar 825 Soil Compactor, 1:50 Scale ......................................................................$35Caterpillar 420E Backhoe/Loader, 1:50 Scale....................................................................$45Caterpillar D6K XL Track Type Tractor, 1:50 Scale ............................................................$45Caterpillar D10T Track Type Tractor, 1:50 Scale ................................................................$75Caterpillar D11R Track Type Tractor, 1:50 Scale................................................................$45Caterpillar D11T Track Type Tractor, 1:50 Scale ................................................................$70Caterpillar 336D L Excavator, 1:50 Scale ..........................................................................$70Caterpillar 797F Off-Highway Truck, 1:50 Scale ..............................................................$250Caterpillar 950H Wheel Loader, 1:50 Scale ......................................................................$45Caterpillar 980G Wheel Loader, 1:50 Scale ......................................................................$35Caterpillar 992 Wheel Loader, 1:50 Scale ........................................................................$50Caterpillar 994F Wheel Loader, 1:50 Scale ......................................................................$95 Caterpillar 226B2 Skid Steer Loader w/tools, 1:32 Scale ................................................$30Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale ..................................................$40Caterpillar D5G XL Track Type Tractor, 1:50 Scale ............................................................$55Caterpillar D8R Track Type Tractor, 1:50 Scale..................................................................$40Caterpillar Vintage Twenty Tractor w/metal tracks, 1:16 Scale ........................................$70Caterpillar 302.5 Mini-Excavator, 1:32 Scale ....................................................................$30Caterpillar 320C Excavator, 1:50 Scale ..............................................................................$35Caterpillar 330D L Excavator, 1:50 Scale ..........................................................................$70Caterpillar 511 OB Excavator, 1:50 Scale ..........................................................................$65Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale ..........................................................$30Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale ..................................................$40Caterpillar 365C L Front Shovel, 1:50 w/metal tracks ..........................................................$70Caterpillar 963D Track Loader, 1:50 Scale ............................................................................$45Caterpillar 977 Traxcavator, 1:50 Scale ............................................................................$35Caterpillar 611 Motor Scraper in display case, 1:64 Scale ..............................................$25Caterpillar 623G Elevating Motor Scraper, 1:50 Scale ......................................................$45Caterpillar 725D Articulated Truck, 1:50 Scale..................................................................$30Caterpillar 775E Off-Highway Truck in display case, 1:64 Scale ......................................$25Caterpillar 777D Off-Highway Truck, 1:50 Scale................................................................$40Caterpillar "O" Gauge Complete Train Set ..........................................................................$275Caterpillar Agricultural 75E Tractor, 1:64 Scale ................................................................$12
Caterpillar Four Piece Military Set, 1:50 Scale ................................................................$75Hitachi LX70 Wheel Loader, 1:40 Scale ............................................................................$65International 433 Motor Scraper, 1:25 Scale ..................................................................$175International 560 Payloader, 1:25 Scale ..........................................................................$175International Harvester 560 PayLoader, 1:87 Scale ..........................................................$35International TD-24 Military Dozer, 1:50 Scale..................................................................$50JCB 3CX Backhoe Loader, 1:50 Scale ................................................................................$50JCB 456 Loader Waste Master, 1:50 Scale ........................................................................$60JCB 456 ZX Wheel Loader, 1:50 Scale ..............................................................................$65JCB Vibromax VM 115 Soil Compactor, 1:50 Scale ..........................................................$45John Deere 320 Skid Steer Loader, 1:16 Scale ................................................................$45John Deere 850J Dozer, 1:50 Scale....................................................................................$40Komatsu 960E Mining Truck, 1:50 Scale..........................................................................$275Komatsu PC300LC-8 Excavator, 1:50 Scale ......................................................................$70Komatsu WA500-6 Wheel Loader, 1:50 Scale ..................................................................$60Komatsu D51 EX Dozer, 1:50 Scale ....................................................................................$60Komatsu D51 PX Dozer, 1:50 Scale....................................................................................$55Komatsu D375 Dozer, 1:50 Scale ......................................................................................$75Komatsu GD655 Motor Grader, 1:50 Scale ........................................................................$60Komatsu WB146 Backhoe Loader w/tools, 1:50 Scale ......................................................$45Liebherr 580 Wheel Loader, 1:87 Scale ............................................................................$25Link-Belt 210 X2 Excavator, 1:40 Scale..............................................................................$65Mitsubishi FG25N Forklift, 1:25 Scale................................................................................$25Northwest 25-D Shovel, 1:50 Scale..................................................................................$100Peterbilt Tractor/Trailer w/Caterpillar D8R, 1:50 Scale ..................................................$100Peterbilt Blue/Silver 367 Dump Truck, 1:34 Scale ............................................................$85U.S. Army Ford F800 Tractor w/Trailer, 1:50 Scale ..........................................................$35Volvo G970 Motor Grader, 1:50 Scale ................................................................................$65Volvo SD-122 Soil Compactor, 1:72 Scale ........................................................................$45Volvo A25C Articulated Truck, 1:50 Scale ..........................................................................$30Volvo A25D Articulated Truck, 1:50 Scale ..........................................................................$45Volvo A40D Articulated Hauler, 1:50 Scale ........................................................................$50Volvo BL71 Backhoe Loader, 1:50 Scale ............................................................................$45Volvo EC45 Mini-Excavator, 1:50 Scale..............................................................................$35Volvo EC 210 Excavator, 1:50 Scale ..................................................................................$45Volvo EC210C Excavator, 1:50 Scale ..................................................................................$80Volvo EC240B Excavator, 1:50 Scale ..................................................................................$45Volvo EC280 Excavator, 1:50 Scale ....................................................................................$25Volvo EC700 Excavator, 1:50 Scale ....................................................................................$80Volvo FH12 Tractor/Trailer w/Volvo L150C, 1:50 Scale ....................................................$60Volvo L90E Wheel Loader, 1:50 Scale ..............................................................................$65Volvo L60E Wheel Loader w/Attachments, 1:50 Scale ......................................................$65Volvo 150E Wheel Loader, 1:50 Scale ..............................................................................$45Volvo L35B Wheel Loader, 1:50 Scale ..............................................................................$45Volvo L350F Wheel Loader, 1:50 Scale ............................................................................$80
Shipping and Handling Additional
All New in Box
Collections Wanted, I Buy Collections
GREAT HOLIDAY GIFTS!GREAT HOLIDAY GIFTS!
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – [email protected]
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Allis Chalmers HD-41 Crawler Dozer, 1:25 Scale..................................................$190
Caterpillar "O" Gauge Complete Train Set ........................................................................$275
Bobcat Tractor/Trailer Set,1:50 Scale ............................................................$80
Northwest 25-D Shovel, 1:50 Scale ....................................................................$100
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 31
2005 VibromaxVM116PDB, s/nJKC8340900, 945 Hrs, 82”Padfoot Roller w/Blade .....................................$43,000
2005 Takeuchi TB53FR,s/n 15811048, 1845 Hrs,Rubber Track Mini-Excavator, Cab w/Heat, 18”& 24” Buckets .......$35,800
2000 Case 580SL, s/nJJG0273871, 3182 Hrs,Cab/Heat, 4WD, Ext-Hoe, 2Lever Controls ......$36,500
2004 Vibromax VM116D,s/n JKC8341104, 1575 Hrs,82’ Smooth Drum Roller,ROPS ...................$40,000
2007 Case 1150K, s/nN7DC00076, 786 Hrs, Cabw/Heat & A/C, 132” DozerBlade, 30” Pads, Cold Start,(4000 Full Machine Warrantyuntil 05-30-2011)...$129,00
Mark Kruepke
(630) 739-7770Bolingbrook, IL
Contact us at [email protected]
8 Chicago Area LocationsView our complete Used & “Like New” inventory
at McCannOnline.com
Budrovich Crane rental is quickly becoming the leader in Midwest crane rental services. We are known for our superior equipment, operators and service with mobile hydraulic cranes rang-ing in size from 2-550 tons. Now, after 40 years of taking our customers to new heights, we have added a Manitowoc 999 and
meet the increasing demand for hoisting services which go above and beyond the St. Louis market. For your next project, let BudrovichCrane rental show you how weRun, Crawl and do it all. 314-892-3030 • www.budrovich.com
Run, crawl, we do it all.
STARE Q U I P M E N T
LT D .
Call Sales 515-283-2215 • 877-267-72031401 2nd Ave • Des Moines, IA 50301
� THE CONSTRUCTION EQUIPMENT GUYSSINCE 1968
www.starequip.comDes Moines • Ames • Cedar Rapids • Waterloo
Bobcat S185 Turbo, 56hp Kubota,1,850# load rating, open ROPS,10x16.5 tires new rubber, 67"tooth bucket, I/D: 036163, 1370hours $13,995
Takeuchi TL150, 97hp rubber track-loader, Cab w/Heat & A/C, joystickcontrols – CASE control pattern, 80"tooth bucket, I/D: 5023572324,900 hours $37,500
Gehl 883, 8,000# lift, 40' boom,open ROPS, 50% rubber, 48" car-riage w/ forks, I/D: 077242, 7400hours $14,995
Sky Trak 5028, 5,000# lift, 28'boom, open ROPS, 48" carriage w/48" forks, I/D: 9D2494, 3050 hours$17,500
Mustang ME3003, 6,700#, 9’6” maxdig depth, 29hp Yanmar diesel,OROPS, aux. hyd., 24” pin on bucket,I/D: D03044, 530 hours $16,995
Mustang 940E, 40hp loader, T-barsteering, single pin FAT, tooth buck-et, 10x16.5 tires @ 25%, I/D:499606, 2057 hours $8,495
Takeuchi TL120,52hp rubbertrackloader, openROPS, backupalarm, joystickcontrols, I/D:200219, 300hours $19,995
Mustang 2076,84hp skid steer,open ROPS,hand/foot con-trols, hydraulicpower-tach, I/D:0 0 4 8 8 3 2 3 1 2 ,352 hours$21,995
Page 32 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
• AGC of Minnesota• MCMA of Minnesota• LICA• ABC• Aggregate & Ready
Mix Association• MUCA
• Minnesota SafetyCouncil
• Minnesota State Patrol• Operating Engineers -
Local #49• Hennepin Technical
College
SEMINARS & TRAINING SESSIONS EXHIBITSCome see the latest makes and
models of Construction Equipment,including Caterpillar, John Deere,
JCB, Gehl, Case and More!
Trucks, Trailers, Attachments,Contractor Supplies and Services
SECT IONTrucks & Trailers
Mack Trucks Deliver Christmas Trees in N.Y., D.C.Who needs flying reindeer when
Christmas arrives on a Mack truck? Two ofthe most famous Christmas trees in the coun-try were delivered this year by customers ofMack Trucks Inc.: the Rockefeller Centertree in New York City, and the U.S. CapitolChristmas tree in Washington, D.C.
The Rockefeller Center tree — a monu-mental 10-ton, 76-ft. Norway spruce har-vested in Connecticut — arrived first, hauledby a Mack Vision axle back tractor into thecenter of the Big Apple holiday kickoff at 8a.m. Nov. 12. The arrival was covered liveon national television by NBC’s TodayShow.
The Mack Vision model, owned and oper-ated by Torsilieri Inc. of Gladstone, N.J., hadno trouble traversing the heart of Manhattan,due to its maneuverability, tight turningradius and skilled driver. This year marks the27th time Torsilieri has delivered theRockefeller Center Christmas tree.
The 2009 U.S. Capitol Christmas Treehad a longer journey to make, from Apache-Sitgreaves National Forest in Arizona to thefoot of Capitol Hill in Washington, D.C. The85-ft. blue spruce was harvested on Nov. 7.In this case, a Mack CH axle back tractor did
see TREES page 38
The 2009 Rockefeller Center Christmas tree arrives at its destination in New York City on the morning of Nov. 12, delivered byTorsilieri Inc.’s Mack Vision tractor. This is the 27th time a Torsilieri Mack has delivered its load of holiday cheer toRockefeller center.
While it may be a little too big to fit down a chimney, the freshly-cut 2009 U.S.Capitol Christmas tree is lowered into a special cradle on a trailer behind aSouthwest Industrial Rigging Mack CH in Arizona Nov. 7th.
The massive U.S. Capitol Christmas tree is safely ensconced in a protective trailer,keeping the blue spruce fresh as it traveled for 10 days through the state ofArizona then cross-country to Washington, D.C. and the grounds of the U.S. Capitol.Southwest Industrial Rigging’s powerful Mack CH was enlisted to handle this veryspecial delivery.
Page 34 • December 12, 2009 • www.constructionequipmentguide.com • Trucks and Trailers Section • Construction Equipment Guide
Highlift LLC, a Midwest Tractor company,is now an authorized distributor for Rogerstrailers in Ohio and parts of Kentucky andIndiana. It stocks a wide range of new and usedequipment, for sale as well as rental, in theproduct lines of: Caterpillar, John Deere, JLG,Lull, Skytrak, Gradall and Takeuchi.
Highlift’s growth and success is a directresult of its attention to the needs of its cus-tomers, according to Rogers. Job site deliveryof equipment is offered anyplace in the UnitedStates. Service, parts and financing are allavailable onsite.
Highlift is located on Interstate 75 at 125Citycentre Drive, Cincinnati, Ohio.
For more information about Rogers, call800/441-9880 or visit www.rogerstrailers.com.
For more information about Highlift, call800/696-9517 or visit www.highliftllc.com.
Ohio…
Rogers Names Highlift New Dealer
The Rogers TAG20 is now available for sale and rental at Highlift.
Nuss Truck NamedNew Dealer for XLSpecialized Trailers
XL Specialized Trailers Inc. has announced the signing ofa representation agreement with a new dealer, Nuss Truck &Equipment. Nuss Truck & Equipment has seven strategiclocations and will help increase XL’s support in Minnesotaand western Wisconsin.
“Our expanding dealer network is a direct reflection ofour growing market share in the U.S.,” said Scott Wall, pres-ident and CEO of XL. “Having a new dealer of the caliberof Nuss Truck & Equipment reinforces the message tohaulers that XL and its dealer partners represent the best inthe transportation industry today.”
About XLXL had specialized in designing and building commer-
cial, construction, agriculture, wind and oil energy, and cus-tom style trailers since 1995.
Wallwork Kenworth Adds New Facilities in N.D., Minn.
Wallwork Kenworth has expanded itsoperations and customer support with newfacilities in Williston, N.D., and FergusFalls, Minn.
A member of the Kenworth dealer net-work of more than 300 locations in theUnited States and Canada, the newWallwork Kenworth — Williston parts andservice facility is on a 5-acre site near U.S.Highway 85. The dealership features a 6,000sq.-ft. service department with six bays, anda large parts warehouse to support vocation-
al customers involved with the Williston OilBasin.
“We’ve decided to make some significantinvestments in our business this year to bet-ter serve our customers,” said WilliamWallwork III, Wallwork president and dealerprincipal.
Wallwork’s Williston facility is located at2615 University Ave. The dealership is openfrom 8 a.m. to 5 p.m. Monday throughFriday. The phone number is 701/774-3007.
In addition, 24-hour mobile service is avail-able upon request.
Wallwork Kenworth — Fergus Fallsrecently relocated its parts facility to a 2.5-acre site at the north end of Fergus Falls withconvenient access from U.S. Highway 59and Interstate 94. The newly renovated facil-ity provides parts support with the potentialfor future growth. The dealership is locatedat 26275 U.S. Highway 59 and is open from7:30 a.m. to 5:30 p.m. Monday through
Friday. The phone number is 218/998-3297.Wallwork maintains its headquarters loca-
tion in Fargo, N.D. Earlier this year,Wallwork Kenworth opened a new, 39,000sq.-ft., dealership in Bismarck, N.D., on a5.5-acre site near Exit 161 off Interstate 94.
Wallwork has been a Kenworth dealer for40 years and has received Kenworth’sDealer Excellence Award 15 times.
For more information, visit www.wall-worktrucks.com.
Wallwork Kenworth has expanded its operations and customer support with new facilities in Williston, N.D., and Fergus Falls, Minn.
Construction Equipment Guide • Trucks and Trailers Section • www.constructionequipmentguide.com • December 12, 2009 • Page 35
Utility Van $28,995 Work Van $19,995 Red Utility Van $31,995
15’ Cube Van $25,995 12’ Flatbed $24,995Dump Truck $31,995
4x4 8’ Flatbed $25,995 12' Cube Van $27,995 Service Body $23,995
877-850-997712475 Plaza Drive, Eden Prairie, MN 55344
www.suburbanchev.com
©2008 GM Corp.
*All Sale Prices Include Manufacturer Rebate & Commercial Rebate For Qualified Commercial Customers To Dealer, Not Including Tax Or License.”
12' Dually Cube $28,995 4x4 Service Body $27,995 12’ WorkPro Cube $33,995
Commercial Close-Out
Page 36 • December 12, 2009 • www.constructionequipmentguide.com • Trucks and Trailers Section • Construction Equipment Guide
Naperville1400 W. Ogden Ave.
630-355-7150
South Holland310 W. 162 St. Rt. 6
708-331-6362
Rockford3110 Prairie Rd.815-961-3160
Wauconda1560 North Old Rand Rd.
847-526-7700
Rockdale600 Walnut Ct815-730-9011
www.westsidetractorsales.com
Scharber & Sons, Inc. 13725 Main Street Rogers, MN 55374
763-428-4107 Fax: 763-428-2700 www.scharbers.com
949 3rd Ave.Windom, MN 56101
507-678-2752
6140 Highway 10 NWAnoka, MN 55303
763-323-1720 888-448-5266
Fax: 763-422-3949
3021 West 133rd Shakopee, MN 55379
952-445-6310 Fax: 952-496-0263
23580 Highway 55 Loretto, MN 55357
763-479-8200 Fax: 763-479-8201
Columbus Branch 50 E Kingston Ave
Columbus, OH 43207614-443-6541
Fax: 614-449-0182www.columbusequipment.com
Cadiz Branch 290 Old Steubenville Pike
Cadiz, OH 43907740-942-8871740-942-3611
Canton Branch 1601 Shepler-Church Ave. SW
Canton, OH 44706330-453-4521330-453-4701
Cincinnati Branch 11512 Gondola St
Cincinnati, OH 45241513-771-3922513-771-6547
Dayton Branch 7570 New Carlisle Pike
Dayton, OH 45424937-879-3154937-879-3688
Jackson Branch 1611 Pattonsville RdJackson, OH 45640
740-288-0222740-286-0808
Painesville Branch 864 Richmond Road
Painesville, OH 44077440-352-0452440-352-0730
Richfield Branch 3942 Brecksville RdRichfield, OH 44286
330-659-6681330-659-4760
Toledo Branch 12500 Williams Rd
Perrysburg, OH 43551419-872-7101419-874-7413
Construction Equipment Guide • Trucks and Trailers Section • www.constructionequipmentguide.com • December 12, 2009 • Page 37
Vermeer Sales & Service
1675 126th St. WestBurnsville, MN 55337
952-890-6144Fax: 952-882-2980
www.vermeerofminnesota.com
Midwest Trailers Plus, Inc.548 29th St. West
Des Moines, IA 50265515-223-8463
Toll Free: 888-560-2787Fax: 515-223-6446
www.midwesttrailersplus.com
Farm-Rite Equipment Inc.901 Parker Ave West
PO Box 26Dassel, MN 55325
320-275-2737Toll Free: 888-679-4857www.farmriteequip.com
McCann Industries, Inc.
Addison543 South Rohlwing Road
Addison, IL 60101630-627-0000
Fax: 630-627-8711
Big Rock47W247 US Highway 30
Big Rock, IL 60511630-556-3111
Fax: 630-556-3749
Bolingbrook250 East Frontage RoadBolingbrook, IL 60440
630-739-7770Fax: 630-739-7699
Chicago2350 South Laflin Street
Chicago, IL 60608312-942-9200
Fax: 312-421-3502
Crestwood4701 West 137th Street
Crestwood, IL 60445708-597-3110
Fax: 708-597-9945
McHenry4102 W. Crystal Lake Road
McHenry, IL 60050815-385-0420
Fax: 815-385-2975
Schererville1133 Indianapolis Boulevard
Schererville, IN 46375219-865-6545
Fax: 219-865-0269
Wauconda1360 North Rand RoadWauconda, IL 60084
847-526-9444Fax: 847-526-9448
www.McCannOnline.com
Page 38 • December 12, 2009 • www.constructionequipmentguide.com • Trucks and Trailers Section • Construction Equipment Guide
Mack Transports ChristmasSpirit on Its Metal ‘Sleigh’
the honors, taking the tree on a 10-day tourof the state, then making the cross-countryjourney to Washington, D.C. The special treetraveled in a special trailer transported by aspecial truck. Owned and operated byheavy-haul specialist Southwest Industrial
Rigging, Phoenix, the red, white and blueMack daycab attracted attention all the wayfrom the Grand Canyon State to the Nation’sCapital. This is the first time a tree fromArizona has been selected by the U.S. ForestService to adorn the Capitol grounds for theChristmas holidays.
A Mack Vision with a very special load. The 2009 Rockefeller Center Christmas treewaits to be unloaded and placed in its stand Nov. 12th.
TREES from page 33
Newark, IL (815) 695-5291
Building Trailers To Meet Your Needs
Dierzen Trailer Co.
Kewanee, IL (309) 853-2316
21980 KENRICK AVE. • LAKEVILLE, MN 55044PHONE: (952) 469-1006 FAX: (952) 469-1152
WWW.MIDLANDEQUIPMENTCO.COM
• Watson Chalin & Ridewell Pusher & Tag Axles • Toolboxes• Strobes & Vibrators • Custom Contractor & Tree Bodies
• PullTarp & Roll-Rite Tarp Systems• Replacement Dump Bodies & Tailgates
• Bibeau Dump Bodies • Tafco Platform & Contractors Bodies• Bonnell Sanders & Snow Plows • Wet Kits • Cab Guards• HTC – Hydraulic Truck Conveyors • Frame Stretching
CUSTOM BUILT MIDLAND DUMPBODIES & TRAILERS
Mailhot and Custom Telescopic Hoists
Custom Welding & Fabrication – We Repair All Competitor Boxes
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 39
Page 40 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
3478 5th Ave. S.Fort Dodge, IA 50501
(515) 574-2302
4734 Sergeant Rd.Waterloo, IA 50701
(319) 234-8710
Mid Country Machinery(800) 206-5936
www.midcountrymachinery.com
2007 Kobelco SK-350LC8 EROPS, A/C, Plumbed, 700 Hrs ..................................................................................................P.O.R.
2006 Kobelco SK-290LC A/C, Very Good Condition, 2,700 Hrs........................................................................................$105,0002008 Kobelco SK-260LC8 60ft Long Reach ..............FOR RENT2007 Kobelco SK-260LC8 A/C, Plumbed, NEW ................P.O.R.2006 Kobelco SK-250LC 60ft. Long Reach, 2,000 Hrs $145,0002005 Kobelco SK-250LC A/C, Plumbed, Very Good Cond. ................................................................................................$85,000(4) 2008 Kobelco SK-210LC8 Cab, A/C, Aux Hyd, NEW ........................................................................................From $125,0002006 Kobelco SK-210LC A/C, Hyd. Thumb, 2,500 Hrs ..$85,0002007 Kobelco SK-170 LC8 Cab, A/C, NEW........................P.O.R.2007 Kobelco SK-160LC 42" Bucket, A/C ......................$99,0002005 Kobelco SK-160LC A/C, QC, Hyd. Thumb, 1,600 Hrs ................................................................................................$65,0002001 Kobelco SK-160LC A/C, Manual Thumb, One Owner ................................................................................................$43,0002009 Kobelco ED195 Blade Runner, A/C, Plumbed, NEW P.O.R.2008 Kobelco ED150 Blade Runner, A/C, NEW ................P.O.R.2007 Kobelco ED150 Blade Runner, A/C, NEW ................P.O.R.(3) 2007 Kobelco 135SR LC A/C, plumbed, wide pads, shortradius, NEW ......................................................................P.O.R.2009 Gradall XL4100, 6x4, A/C, NEW..........................$350,0002006 JD 180CW Wheel Exc, QC, Ditch Bkt, 1,300 Hrs ..$89,0002004 JD 160C LC A/C, plumbed, excellent cond, 1,400 Hrs................................................................................................$75,0002006 Cat 330DL A/C, QC, 1,600 Hrs ............................$190,0002003 Cat 320CL, Aux. Hyd., One Owner, 5300 Hrs ........$63,0002000 Cat 318BL, A/C, Good Condition, 4030 Hrs ..........$51,0002007 Komatsu PC220LC-8, A/C, 48" Bkt, 1,100 Hrs ....$105,000
2008 NH B110 EROPS, 4WD, E-Hoe, A/C ..........................P.O.R.2008 NH B95 A/C, Aux Hyd, Pilot Controls, RC, NEW ......P.O.R.2007 NH B95 EROPS, A/C, 4WD, E-Hoe, Pilot Con., 168 Hrs ............................................................................................$55,0002005 JD 310G EROPS, 4WD, Standard Hoe ..................$38,5002004 JD 310G EROPS, 4WD, Standard Hoe ..................$38,5002001 Cat 416CIT, EROPS, 4WD, E-Hoe ..........................$29,000FULL LINE OF NEW HOLLAND LOADER BACKHOES AVAILABLE
2008 Kobelco 80 CS EROPS, A/C, New..........................$75,0002007 Kobelco SK 70 SR Steel or Rubber, EROPS, A/C, 300 Hrs........................................................................................$65,0002007 Kobelco 50SR-3 EROPS, A/C, Aux Hyd, Rubber Tracks,NEW ..................................................................................P.O.R.2007 Kobelco 35SR3 (1) OROPS, (1) EROPS, NEW ........P.O.R.2008 Kobelco 17SR OROPS, Expandable Tracks, NEW ....P.O.R.2003 Bobcat 325D OROPS, Rubber Tracks, 1900 Hrs ..$15,000Hitachi ZX70 EROPS, Steel Tracks ................................$35,000
2006 Cat D8T EROPS, A/C, New Cat UC, 4 bbl Ripper $440,0002006 Cat D8T EROPS, A/C, SU Blade, 2,700 Hrs ........$420,0002007 Cat D6K XL EROPS, A/C, 6-Way, 900 Hrs ..........$140,000(2) 2004 Cat D6R LGP EROPS, A/C, Str. Blade, One Owner......................................................................................$105,000 ea.
2001 Cat D6R XL, EROPS, A/C, S/U Blade ....................$95,0002007 Cat D6R XWIII, EROPS, A/C, 2500 Hrs ..............$185,0002003 Cat D6R XW, EROPS, A/C, 6-Way, Sweeps, New U/C ..............................................................................................$125,0002001 Cat D6M LGP, EROPS, A/C, 6-Way........................$67,5001995 Cat D6H XL, EROPS, A/C, S/U Blade ....................$72,0002007 Cat D6N LGP, EROPS, A/C, 6-Way, 2,900 Hrs ....$137,0002004 Cat D5N XL OROPS, 6-Way blade, exc. Condition, 1,700Hrs ..................................................................................$93,000(2) 2003 Cat 973C EROPS, A/C, GP Bucket ............$95,000 ea.2006 Cat 963C EROPS, A/C, GP Bucket, 2,900 Hrs ....$155,0002004 Cat 963C EROPS, A/C, GP Bucket, 4,200 Hrs ....$127,0002002 Cat 963C EROPS, A/C, GP Bucket, 8,400 Hrs ......$79,0001995 Cat 963B EROPS, GP Bucket, good cond, 7,296 Hrs ................................................................................................$45,0002006 Cat MT865B, Excellent Condition, 2700 Hrs........$165,0002005 JD 750J LGP EROPS, A/C, 6-Way Blade, 2,100 Hrs ................................................................................................$107,0002005 JD 700J XLT, EROPS, A/C, 6-Way Blade................$79,0002005 JD 700H LGP EROPS, A/C, 6-Way Blade, 3,500 Hrs ..................................................................................................$79,0002006 JD 650J XLT EROPS, A/C, Laser System, 650 Hrs ..................................................................................................$110,000
2006 Cat 950H EROPS, A/C, 1,700 Hrs........................$159,0002003 Cat 950G EROPS, A/C, RC, 4,500 Hrs ..................$99,0002006 Cat 938G EROPS, A/C, RC, 1,000 Hrs ..................$99,0002006 Cat 938G EROPS, A/C, RC, 2,000 Hrs ..................$87,500 2006 Cat 930G EROPS, A/C, QC, 2,800 Hrs ..................$85,000(2) 2006 Cat 928GZ EROPS, A/C, QC, LOW Hrs ......$82,500 ea.2001 Cat 902 EROPS, QC, 2,200 Hrs ............................$37,5002001 Volvo L220E EROPS, A/C, 7yd Bkt, Radio, RC, 12,971 Hrs......................................................................................$130,0001998 Volvo L180C EROPS, A/C, RC, 17,000 Hrs ..........$67,0002007 NH W190 EROPS, A/C, 4.25 yd GP Bkt, 900 Hrs $145,0002006 JD 644J, EROPS, A/C, RC......................................$82,0002005 JD 544J, EROPS, A/C, QC, 1,800 Hrs....................$87,0001989 JD 444E, EROPS, GP Bkt ......................................$21,5002003 Komatsu WA180-3RT, EROPS, GP Bkt, 4,813 Hrs $57,5002005 Hyundai HL740-7, EROPS, A/C, 2,100 Hrs ..........$55,0001975 Case W20, EROPS, GP Bkt....................................$12,000Michigan 175B, OROPS, GP Bkt ......................................$7,500
2007 IR SD122F 84" Padfoot w/Blade ............................$95,0002003 IR SD100F 84" Padfoot, 609 Hrs ..........................$75,0002005 IR SD100D-TF 84" Smooth Drum, 500 Hrs ..........$75,0002006 IR SD77DX 66" Smooth Drum, 500 Hrs ................$59,0002003 IR SD77F 66" Padfoot w/Blade ..............................$42,0002004 IR SD70D, 66” Smooth Drum, 830 Hrs ................$49,5002005 IR SD70D OROPS, 66" Smooth Drum, 787 Hrs ....$55,000
2003 IR SD70D OROPS, 66" Smooth Drum, 1,300 Hrs $38,0001999 IR SD70F OROPS, 66" Padfoot, 2,500 Hrs ............$40,0002004 Bomag BW177AD 66" Smooth Drum w/Shell Kit, OROPS,1,300 Hrs........................................................................$45,0002004 Bomag BW177PDH OROPS, 66" Padfoot, 1,400 Hrs ................................................................................................$48,000Ingersoll Rand DD12 32" Double Drum Roller, 321 Hrs $13,000(2) 2002 Vibromax 605D OROPS, 66" Padfoot, 1,800 Hrs..................................................................................................$37,0002007 Dynapac CA150D 66" Smooth Drum, 30 Hrs ........$59,000
(10) 06-09 SkyTrak 10054, EROPS, 10,000#, 54Ft. Tilt CarriageStart at $71,000(12) 06-09 SkyTrak 8042, EROPS, 8000#, 42Ft, Tilt Carriage ..............................................................................Start at $49,000(9) 05-09 SkyTrak 6042, EROPS/OROPS, 6000#, 42Ft, Tilt Car..........................................................................Start at $31,0002007 SkyTrak 6036, EROPS w/Heat, 6000#, 36Ft, Tilt Car, 700Hrs ................................................................................$52,0002005 SkyTrak 6036, OROPS, 6000#, 36Ft, 1900 Hrs ....$31,0002004 SkyTrak 6036, OROPS, 6000#, 36Ft, 2500 Hrs ....$34,0002008 JLG G12-55A, OROPS, 12,000#, 55Ft, 143 Hrs ......P.O.R.2007 JLG G9-43A, EROPS, Sidetilt, 9000Lb, 43Ft, 1000 Hrs ..............................................................................................P.O.R.2004 JLG G9-43A, OROPS, 9000#, 43Ft, 1500 Hrs ......$44,0002007 JLG G6-42A, EROPS, Sidetilt, 6600Lb, 42Ft, 1000 Hrs ..............................................................................................P.O.R.2007 JLG G5-19A, EROPS, 5000Lb, 19Ft, 1300 Hrs ........P.O.R.2006 Gehl RS5, 6000#, 35Ft, 400 Hrs ..........................$35,0002006 Gehl RS6, OROPS, 6000#, 36Ft, 1900 Hrs ..........$28,0002005 Gehl RS6, 6000Lb, 36Ft, 1100 Hrs ......................$38,0002005 Mustang 634, 6000Lb, 34Ft, 541 Hrs ..................$45,0001998 Carelift 6044, 6000Lb, 44Ft, 3315 Hrs ................$23,0001998 Traverse 6035, 6000Lb, 35Ft, 600 Hrs ................$25,0002007 Lull 1044C-54, OROPS, 10,000#, 54Ft, 1100 Hrs $72,0001999 Lull 1044C-54, OROPS, 10,000#, 54Ft, 900 Hrs ..$32,0001998 Lull 644B-37, 6000Lb, 37Ft, 4150 Hrs ................$28,000FULL LINE OF NEW SKY TRAK & JLG FORKLIFTS AND MANLIFTS
2004 Cat 140H EROPS, A/C, Push Block, Rear Rip. ....$145,0002006 Cat 613C II EROPS, A/C, Exc. Condition, 1,500 Hrs ................................................................................................$150,000(2) Cat 631B Hydraulic Pull Scraper ........................$30,000 ea.Terex TS-14B EROPS, A/C..............................................$25,0002006 E-Ject E-22, 22Yd. Hyd. Pull Scraper ....................$75,000(2) 2005 Cat 725, Matched Pair, Excellent Condition, 2500 Hrs................................................................................$225,000 Ea.
2002 Cat 725, Articulated Dump Truck, 23.5x25 Tires, 5500Hrs ................................................................................$152,000(2) 2008 Volvo A25D, 25 Ton Articulated Trucks, Like New......................................................................................$225,000 Ea.
*OTHER MISCELLANEOUS EQUIPMENT, PARTS AND ATTACHMENTS NOT LISTED CALL IF YOU DON'T SEE SOMETHING YOU'RE LOOKING FOR
GRADER/SCRAPERS/TRUCKS
FORKLIFTS
COMPACTORS
WHEEL LOADERS
CRAWLER TRACTORS
MINI/MIDI EXCAVATORS
LOADER/BACKHOES
EXCAVATORS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 41
249 W. Lake Street • Elmhurst, Illinois 60126(888) 832-9830(888) 832-9830
Fax: (630) 832-6735www.hartstractor.com
Crawler Loaders1974 Caterpillar 977L S/N 11K06703, OROPS, GP Bucket W/Teeth.............................................................................................................................$25,000
1971 Caterpillar 977L S/N 11K03983, OROPS, GP Bucket W/Teeth.............................................................................................................................$24,000
2003 Caterpillar 963C S/N 2DS02393, EROPS, Air, GP Bucket W/Teeth...................................................................................................................$145,000
2001 Caterpillar 963C S/N 2DS02101, EROPS, A/C, GP Bucket W/Teeth,90% U/C ................................................................................................$95,0002000 Caterpillar 963C S/N 2DS01069, EROPS, Air, GP Bucket W/Teeth,Good U/C..............................................................................................$105,0001996 Caterpillar 963B S/N 9BL01328, EROPS, No Air, GP BucketW/Teeth ..................................................................................................$79,5001999 Caterpillar 953C S/N 2ZN02364, OROPS, GP Bucket W/Teeth, 1600Org. Hrs ..................................................................................................$92,5001996 Caterpillar 953C LGP S/N 2ZN00437, OROPS, 4+1 Bucket W/Teeth .................................................................................................................$64,000
1988 Caterpillar 953 S/N 20Z2083, OROPS, GP Bucket W/Teeth, NewEngine ....................................................................................................$42,0001985 Caterpillar 953 S/N 20Z0530, OROPS, New U/C, GP BucketW/Teeth, C/P ..........................................................................................$37,500
GrindersBitelli SF102 Grinder S/N 95990017 ................................................$135,000Bitelli SF60 Grinder S/N 01025, No Conveyor ..................................$44,000Bitelli SF60 Grinder S/N 980199 ........................................................$52,000Remax 4800 Grinder S/N 9948312601, 48" Cat 260HP Pull Type 12"Depth ......................................................................................................$49,000
Compactors1986 Caterpillar 815B Conv S/N 15Z00374, EROPS Cab, Excellent, 7300Hrs ........................................................................................................$100,0001978 Caterpillar 815 S/N 91P1326, Cab, ST Blade, No A/C ............$79,5001978 Dynapac CC42A DD Roller S/N 547D25, 66" Double Drum, Cat3208 Diesel, Water System ..................................................................$16,000
Wheel Loaders1972 Case W-14 S/N 9110608, EROPS Cab, New Transmission, NewTires, C/P ................................................................................................$16,0001999 Caterpillar IT38G S/N 7BS00652, EROPS, A/C, 20.5x25 Tires, 2249– ECM shows 9139, 3.5 Yd Bkt W/ Boe ............................................$75,0001992 Caterpillar IT28B S/N 1HF02365, EROPS, 17.5x25 Tires, @ 95%Matched, 2.5 Yd Bkt, 8214 Hrs ............................................................$39,0001968 Caterpillar 966C S/N 76J110, Cab, Heat, Lights, New Engine, NeedsPin Work, Tires Fair ..............................................................................$21,0001990 Caterpillar 936E S/N 33Z04157, EROPS, New Trans, GP BucketW/BOE, C/P ..........................................................................................$54,0001987 Caterpillar 936 S/N 33Z2474, EROPS, New 20.5x25 Radials, GPBucket W/BOE ......................................................................................$44,0001986 Caterpillar 936 S/N 33Z1950, EROPS, New 20.5x25 Radials, GPBucket W/BOE ......................................................................................$44,0001975 Clark 55B S/N 416C-793-CAC, EROPS, GP Bucket, New Engine .....................................................................................................................$16,000
Crawler Tractors1997 Caterpillar D-8R S/N 7XM01828, OROPS, SU Blade, New U/C,New Engine, C/P, 9200 Hrs ................................................................$199,0001994 Caterpillar D-5C S/N 9DL00406, 6605 Hrs, New Trans..........$39,5001980 Caterpillar D-5B LGP S/N 46X0504, New Engine, C/P ..........$32,500Caterpillar D-4C S/N 1RJ1417, OROPS ............................................$29,000
Combo Loaders2002 Caterpillar 430D IT S/N BML02305, 4x4, EHOE, Q CPLRS, A/C,Plumbed, New Tires ..............................................................................$49,5001988 John Deere 510C S/N 746646, EROPS, Cab, 4x4 ....................$17,000
Motor Graders1985 John Deere 670A S/N 509900, Cab, Frt Scarifier, 12' MB, 5200 OrgHours ......................................................................................................$26,500
Hydraulic Excavators1998 Caterpillar 315BL S/N 3AW00489, Plumbed Mech Thumb + Bucket .................................................................................................................$69,500
1999 Caterpillar 301.5 S/N 3YW00647, ROPS, Dozer, Rubber Tracks,Plumbed ..................................................................................................$14,0001993 Caterpillar E120B S/N JF1206, 9312 Hrs ..................................$21,0001995 Gradall XL 4100 S/N 411264, 360° Boom Bucket, Cummins PowerUp+Down, A/C ......................................................................................$70,0001976 Gradall 660C S/N NP24078, Detroit Up + Down, One Bucket $8,5001996 Komatsu PC-200 LC-6, S/N A82010 Plumbed QC 48" Bucket, C+P...................................................................................................................$47,000
1979 Linkbelt LS-3400 S/N 49H4639 ................................................$28,000
Skid Steers1997 Bobcat 863 S/N 514415821, 75HP, Turbo Diesel, 66" GP Bucket, C/P................................................................................................................$13,500
1997 Case 90XT S/N JAF0245761, Cab, Heat, Lights, 33x15.5x16.5 Tires@ 90% ....................................................................................................$15,000
Off Road Trucks1996 Volvo A-25C S/N 5350V50826, 30% Bridgestones, 4200 Org. Hours .................................................................................................................$79,500
Trucks1998 Cronkhite Tag Trailer......................................................................$3,000
ScrapersCaterpillar 615 S/N 46Z1391, OROPS ................................................$35,000Caterpillar 615 S/N 46Z1266, OROPS ................................................$35,0001973 Caterpillar 613 Scraper S/N 71M2400, OROPS, 23.5x25........$15,0001974 Terex TS-14 B Scraper S/N 17U0T58092, OROPS. 471 Detroit, 29.5X 25, Unit 401........................................................................................$35,0001976 Terex TS-14B Scraper S/N 17U0T59817, OROPS, 471, Detroit,29.5x25, Unit 402 ..................................................................................$35,0001976 Terex TS-14B Scraper S/N 17U0T59847, OROPS, 471, Detroit,29.5x25, Unit 403 ..................................................................................$37,0001976 Terex TS-14B Scraper S/N 17U0T61098, OROPS, 471, Detroit,29.5x25, Unit 404 ..................................................................................$35,0001976 Terex TS-14B Scraper S/N 17U0T61111, OROPS, 471 Detroit, 29.5X 25, Painted, Unit 405 ........................................................................$37,0001976 Terex TS-14B Scraper S/N 17U0T61483, OROPS, 471 Detroit, 29.5X 25, Unit 406........................................................................................$37,0001976 Terex TS-14B Scraper S/N 17U0T62163, OROPS, 471 Detroit, 29.5X 25, Unit 407........................................................................................$35,0001977 Terex TS-14B Scraper S/N 17U0T62951, OROPS, 471 Detroit, 29.5X 25, Unit 408........................................................................................$45,0001977 Terex TS-14B Scraper S/N 17U0T63684, OROPS, 471 Detroit, 29.5X 25, Unit 409........................................................................................$47,0001977 Terex TS-14B Scraper S/N 17U0T64121, OROPS, 471 Detroit, 29.5X 25, Unit 410........................................................................................$35,0001978 Terex TS-14B Scraper S/N 17U0T64161, OROPS, 471 Detroit, 29.5X 25, Unit 411 ........................................................................................$37,0001978 Terex TS-14B Scraper S/N 17U0T19820, OROPS, 471 Detroit, 29.5X 25, Unit 412........................................................................................$35,0001978 Terex TS-14B Scraper S/N 17U0T2165, OROPS, 471 Detroit, 29.5 X25, Unit 413 ............................................................................................$38,0001978 Terex TS-14B Scraper S/N 17U0T65614, OROPS, 471 Detroit, 29.5X 25, Unit 414........................................................................................$40,0001979 Terex TS-14B Scraper S/N 17U0T65882, OROPS, 471 Detroit, 29.5X 25, Unit 415........................................................................................$37,0001979 Terex TS-14B Scraper S/N 17U0T67340, OROPS, 471 Detroit, 29.5X 25, Unit 416........................................................................................$45,0001980 Terex TS-14B Scraper S/N 17U0T68628, OROPS, 471 Detroit, 29.5X 25, Unit 417........................................................................................$40,0001981 Terex TS-14B Scraper S/N 17U0T69174, OROPS, 471 Detroit, 29.5X 25, Unit 418........................................................................................$39,0001986 Terex TS-14B Scraper S/N 17U0T1700, OROPS, 471 Detroit, 29.5 X25, Unit 419 ............................................................................................$50,0001986 Terex TS-14B Scraper S/N 17U0T72718, OROPS, 471 Detroit, 29.5X 25, Unit 420........................................................................................$54,0001986 Terex TS-14B Scraper S/N 17U0T72943, OROPS, 471 Detroit, 29.5X 25, Unit 421........................................................................................$50,0001986 Terex TS-14 B Scraper S/N 17U0T73053, OROPS. 471 Detroit, 29.5X 25, Unit 422........................................................................................$50,0001986 Terex TS-14 B Scraper S/N 17U0T73059, OROPS. 471 Detroit, 29.5X 25, Unit 423........................................................................................$50,0001986 Terex TS-14B Scraper S/N 17U0T73060, OROPS, 471, Detroit,29.5x25, Unit 424 ..................................................................................$50,0001987 Terex TS-14B Scraper S/N 521263, OROPS, 471, Detroit, 29.5x25,Pilot Controls, Unit 425 ........................................................................$54,000
ComponentsCaterpillar 615 Transmission ..................................................................$7,000Detroit 4-71 Engines ExchDetroit 6V-71 Engine NewCaterpillar 3306 EngineCaterpillar 963 EngineCaterpillar 966D TransmissionDetroit 50 Series EngineCaterpillar 963 TransmissionPerkins Diesel 4 Cyl 65 HP ........................................*NEW* (5) $4,750 EaIH T444E Diesel 7.3 250 HP W/Radiator ..................*NEW* (4) $5,900 EaNew Duramax 6.6L Diesel 210HP ............................................(2) $7,000 Ea
MISC.Amida Light Plant, New Gen. ................................................................$7,000Bobcat Dozer Blade, Hyd New..............................................................$3,600Bobcat Trencher, Used, Hi Flo................................................................$5,500Coleman CJ4D40SQ 40K W Portable Generator Set, S/N 4982862, John Deere diesel, Super Quiet Pack....................................................$12,500Crane Forks ..............................................................................2 @ $600 Each IR Electric Air Dryer S/N 96ADXRO142, 460 Volt 3 phase..............$2,000TB425X BTI ............................................................................................$7,500Kent Hyd. Brkr KHB8G11......................................................................$9,500NPK Plate Compactor, 33"X24" Swivel................................................$5,500
Parts MachinesGrove RT 58 CraneCaterpillar 963MitsubishiCaterpillar 966C
2003 Cat 963C, S/N 2DS02393, EROPS,Air, GP Bucket W/Teeth..............$145,000
Bitelli SF102 Grinder, S/N 95990017 ........................................................$135,000
1997 Cat D8R, S/N 7XM01828, 9200 orig.hrs., new rails, rollers & sprockets, 0 hrson engine, new U/C ....................$199,000
1999 Cat IT38G, S/N 7BS00652, EROPS,A/C, 20.5x25 tires, 2249-ECM, shows9139, 3.5 yd bkt w/BOE ................$75,000
One of 25 In Stock & Ready to work!!! All have had needed repairs, Ready for Dirt.
$35,000-$50,000
1999 Cat 953C, S/N 2ZN02364, EROPS,GP Bucket w/ Teeth, 1800 Hrs ....$92,500
Sales, Rentals, Shop & Field Service, Portable Align Boring & Bore Welding
Where Service Comes First! New engineOnly 3885
original hours
Only 1800originalhours
Low hours
Member of:
Page 42 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
New John Deere Motorgraders Offer Choice, ProductivityUsing extensive customer input and the D-Series as a plat-
form, Deere is introducing six G-Series models, rangingfrom 185 to 275 net hp (138 to 205 kW).
John Deere has been a company of firsts, introducing theindustry’s first articulated motorgrader and the first dual pathhydrostatic front-wheel drive system. Now the tradition con-tinues: John Deere’s new G-Series offers users a choice ofconsole-mounted industry standard controls or armrest-mounted industry standard fingertip controls, as well as fea-tures like cross slope control, automatic differential lock anda rearview camera.
“With the G-Series, it’s not ‘one size fits all’— you’re freeto choose the control style that makes you the most comfort-able and productive,” said Kent Stickler, product marketingmanager of motorgraders, John Deere Construction &Forestry. “And every grader has a steering wheel, no matterwhich control pattern you pick.”
Using extensive customer input and the D-Series as a plat-form, Deere is introducing six G-Series models, rangingfrom 185 to 275 net hp (138 to 205 kW), each engineered forincreased productivity, reliability, durability, serviceabilityand low daily operating costs.
Choices for EveryoneIn controls, there is a choice between the console-mount-
ed low-effort industry standard control pattern or intuitiveand easy-to-use armrest-mounted industry standard fingertipcontrols. If an operator specifies the fingertip controls, he’llstill have a choice between using lever steering or the ever-present steering wheel.
Either way, G-Series controls provide a smooth, pre-dictable response and plenty of power whether the applica-tion calls for heavy blading or fine grading, according to themanufacturer.
There’s also a choice of ground-engaging tools. G-Seriesgraders are available with a front- or mid-mount scarifier, ora rear ripper/scarifier.
“Owners and operators can pick the tool configurationthat’s best for the jobs they do,” Stickler said. “We recognizeeveryone has different needs.”
For road builders, larger site prep contractors and countieswith many road miles to maintain, the G-Series’ Grade Pro
package offers a suite of productivity-enhancing features forhigh-production grading.
Grade Pro models have industry-standard pattern fingertipcontrols, located on the armrest. They offer lever steeringand the steering wheel for operators who prefer traditionalsteering.
With the push of a button, operators can engage return-to-straight, bringing the rear frame back to center. Cross slopecontrol allows operators to select a desired slope and main-tain it with just one blade lift lever. Slope control technologycan assist less experienced operators.
“With the Grade Pro package, Deere makes it easier to doyour best work,” Stickler said. “When you combine smoothergonomically correct controls, cross slope and return-to-straight, you have a machine with unmatched comfort andcontrol. These are the controls that all blade operators prefer– there’s no need to re-learn how to run this motorgrader.”
All John Deere G-Series Grade Pro units are grade-con-trol ready. These machines can accept Trimble or Topcongrade control systems, whichever manufacturer the customerprefers. All automatic grade control buttons and controls areintegrated into the control levers.
A rear camera system with radar object detection is anavailable option and a high/wide-back air-suspension heatedseat completes the package.
All G-Series graders also have keyless start with multiplesecurity codes, enabling owners to control who has access tothe grader. JD Link Ultimate also is standard equipment.
Engine and TransmissionDeere PowerTech Plus 9.0-L high torque Tier III engines
provide lugging and low RPM power, with standard variablehorsepower. Coupled with the heavy-duty Deere transmis-sion with EBS (Event Based Shifting) transmission soft-ware, operators will not only enjoy plenty of power to get thejob done but also will experience extraordinary smoothness,according to the manufacturer.
The rear axles feature automatic differential lock. Thehydraulic clutch-style differential lock can be engaged on the
go.Three of the six new G-Series models have six-wheel
drive rather than tandem drive, enabling them to powerthrough the toughest cuts with power flowing to all wheels.As a result, operators enjoy increased traction and a 30-per-cent increase in tractive effort. Six-wheel-drive units alsohave a precision mode for ultra-low speed operations andsteering compensation to help pull the machine through aturn. These models are the 672G, 772G and 872G.
All G-Series machines have programmable auto-shut-down for fuel savings.
ServiceabilityJohn Deere believes that easy-to-service machines are
important to increased uptime and low daily operating costs.That’s why each G-Series motorgrader has been engineeredwith a convenient transmission, hydraulic and differential fil-ter bank for fast access. There’s also ground level fueling anda swing-out cool-on-demand automatic reversing fan stan-dard on every model.
“If you work in a dusty environment or one prone todebris, the standard auto reversing fan is going to save youtime and maintenance costs,” Stickler said. “The entire cool-ing package folds out for easy cleanout.”
Deere’s NeverGrease pin joints mean a 56-percent reduc-tion in greasing, leading to more time and money savings.
“NeverGrease joints will last longer,” Stickler said. “Andthe tighter joints also will improve the accuracy of your bladework.”
The multi-function LCD color monitor lets the operatorcontinuously track vital machine readings and temperatures.Other items shown include diagnostics system analysis andthe view from the optional rear camera. Additional G-Seriesenhancements include increased blade lift height, increasedcircle throat clearance and a large tapered roller bearing inthe articulation joint. A Balderson-style front lift group hasbeen added to make it easier to attach snow equipment.
For more information, visit www.JohnDeere.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 43
Mustang equipment is a consistent workhorse. Put the performance and versatility of Mustang
to work for you. For information on Mustang’s complete line of compact equipment, see
your nearest Mustang dealer or visit mustangmfg.com.
mustangmfg.com
1401 2ND AVENUEDES MOINES, IA 50314
(515) 283-2215FAX: (515) 283-0295
(800) 369-2215
2625 W. AIRLINE HWY.WATERLOO, IA 50703
(319) 236-6830FAX: (319) 236-6834
(800) 791-9249
2950 6TH STREET SWCEDAR RAPIDS, IA 52404
(319) 365-5139FAX: (319) 365-6726
(800) 728-5139
2100 E. LINCOLN WAYAMES, IA 50010(515) 233-9500
FAX: (515) 233-9505(866) 856-2312
STAR EQUIPMENT LTD.
5505 N. HWY. 169PLYMOUTH, MN 55442
(888) 824-6559www.topnotchequipment.com
TOP NOTCH EQUIPMENT
Page 44 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
KANSASColeman EquipmentBonner Springs (913) 422-3040
The Victor L. Phillips CompanyGarden City (620) 275-1996
Topeka (785) 267-4345
Wichita (316) 838-3346
Price Brothers EquipmentWichita (316) 265-9577
KENTUCKYDiamond EquipmentBowling Green (270) 781-1061
Hunt Tractor Inc. Elizabethtown (270) 735-9212
Louisville (502) 566-6300
McKeel Equipment Company Inc.Murray (270) 753-3062
Paducah (270) 444-0110
Southeastern EquipmentBurlington (859) 586-6133
State Equipment Inc.Ashland (606) 928-5644
Wilson EquipmentCorbin (606) 528-0700
Lexington (859) 254-6443
Prestonsburg (606) 874-8037
Wright ImplementLiberty (606) 787-8331
MICHIGANBridgeport Equipment Co.Bridgeport (989) 777-1900
Miller-Bradford & RisbergNegaunee (906) 475-4181
Northern Michigan EquipmentTraverse City (231) 943-3700
Southeastern EquipmentHolt (517) 694-0471
Novi (248) 349-9922
CASE AUTHORIZED DEALERS
ILLINOISBirkey’s Construction Equipment CompanyGalesburg (309) 341-4360
Hudson (309) 726-1132
Mattoon (217) 235-3158
Urbana (217) 337-1781
Burris EquipmentIngleside (815) 363-4100
Waukegan (847) 336-1205
Diamond EquipmentMt. Vernon (618) 242-2273
H. Edwards EquipmentBelleville (618) 233-2184
Luby Equipment ServicesQuincy (217) 222-5454
Springfield (217) 744-2233
McCann IndustriesBolingbrook (630) 739-7770
McHenry (815) 385-0420
Miller-Bradford & RisbergRockford (815) 397-6200
INDIANADiamond EquipmentEvansville (812) 425-4428
Terre Haute (812) 299-4747
Hopf EquipmentHuntingburg (812) 683-2763
MacDonald Machinery Co.Fort Wayne (260) 747-1561
Indianapolis (317) 856-3000
Lafayette (765) 742-2080
South Bend (574) 271-0800
McCann IndustriesSchererville (219) 865-6545
IOWAGreiner ImplementOttumwa (641) 683-1691
Titan MachineryCedar Rapids (319) 399-1033
Clear Lake (641) 357-2511
Davenport (563) 386-0400
Des Moines (515) 974-5100
Sioux City (712) 239-4941
While other companies may come and go, Case is in it for the long haul.
And we’re here to help with our most aggressive year-end deals ever.
BUY NEW EQUIPMENT TODAY.PAY NEXT YEAR!
NO INTERESTNO PAYMENTS
BUY NEW EQUIPMENT TODAYAND PAY NEXT YEAR!
FOR 6 MONTHS*UPTO
* For commercial use only. Customer participation subject to credit qualification and approval by CNH Capital America LLC. See your Case dealer for details and eligibility requirements. CNH Capital America LLC standard terms and conditions will apply. Down payment may be required. Not all customers or applicants may qualify. Offer good through December 31, 2009 at participating Case dealers in the United States. Taxes, freight, set-up, delivery, additional options or attachments not included in suggested retail price. Offer subject to change or cancellation without notice.** CNH Capital and Case dealerships do not provide tax, legal or accounting advice. Customers are strongly encouraged to seek their own professional advice on the proper treatment of these transactions. *** See dealer for details, including minimum purchase requirements and finance terms and conditions. © 2009 CNH America LLC. All rights reserved. Case is a registered trademark of CNH America LLC.
www.casece.com / 866-54CASE6
Put new equipment to work long before your first payment is due!
From now until Dec. 31, 2009, we’re offering up to 6 MONTHSWITH NO PAYMENTS, NO INTEREST* on new Case equipment.
Plus, you may qualify for a 50% tax depreciation bonus in 2009!**
Need parts, service or attachments? Get your entire fleet of
equipment ready today with our 3 MONTH NO PAYMENTS, NO INTEREST PROGRAM.***
For details on these and other offers, call your Case
dealer today. OFFERS END DECEMBER 31, 2009.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 45
NEBRASKATitan MachineryLincoln (402) 464-3711Omaha (402) 733-3700
OHIOEckert BrothersSugar Creek (330) 852-2611
Meyer EquipmentRidgeville Corners (419) 267-3848
Southeastern EquipmentBrilliant (740) 598-3400Brunswick (330) 225-6511Cambridge (740) 432-6303Dublin (614) 889-1073Gallipolis (740) 446-3910Heath (740) 522-3500Mansfield (419) 529-4848Marietta (740) 374-7479Mentor (440) 255-6300Monroe (513) 539-9214North Canton (330) 494-3950Perrysburg (419) 874-0331
Twin Valley EquipmentEaton (937) 456-6281
WISCONSINMiller-Bradford & RisbergAbbotsford (715) 223-2381De Pere (920) 338-5800Eau Claire (715) 832-3443Madison (608) 222-9191Sturtevant (262) 878-1592Sussex (262) 246-5700
Service Motor CompanyDale (920) 779-4311Fond du Lac (920) 923-1768New Franken (920) 468-7700
St. Joseph EquipmentLa Crosse (608) 788-1025
Triebold ImplementWhitewater (262) 473-2090
MINNESOTASt. Joseph EquipmentElk River (763) 262-4474Hermantown (218) 727-3038Rochester (507) 288-3402Shakopee (952) 445-5400
Titan MachineryMarshall (507) 532-5783
MISSOURICrown Power & EquipmentColumbia (573) 443-4541Eldon (573) 392-0230Jefferson City (573) 636-5281
Luby Equipment ServicesCape Girardeau (573) 334-9937Fenton (636) 343-9970O’Fallon (636) 332-9970
Nelson Tractor & Equipment Poplar Bluff (573) 785-9628
Potter Equipment CompanySpringfield (417) 862-9275
Rex Spencer EquipmentBelton (816) 241-9290
The Victor L Phillips Co.Joplin (417) 781-8222Kansas City (816) 241-9290
NORTH DAKOTATitan MachineryBismarck (701) 250-7925Fargo (701) 237-3333Minot (701) 852-3188West Fargo (701) 775-8111
SOUTH DAKOTAJenner EquipmentRapid City (605) 343-6682
Titan MachineryAberdeen (605) 225-0505Rapid City (605) 388-0266Sioux Falls (605) 336-3434
In addition to the exhibits, these shows will be an outstanding educational oppor-tunity for attendees.
Educational OpportunitiesAvailable at Midwest Expos
signed up for the Midwest ConstructionExpo, which will be held at the MinneapolisConvention Center on March 18 and 19.
In addition to the exhibits, these showswill be an outstanding educational opportu-nity for attendees. Many of the industry’sleading associations are working closelywith CEG Productions, the show’s produc-ers, to develop programs that will help con-tractors do their jobs better, faster, safer andmore efficiently.
To whet your appetite, Chicago seminarswill include:
• LICA• Julie One Call “Legislative changes that
impact excavators,” • Jacob Scott, U.S. Dept. of Labor —
OSHA, will speak about “New changes inOSHA standards, policies and inspectionprocedures”
• Patten Construction Products BillBayne, Environmental Health & Safetymanager will address “Diesel CombustionEmissions Reduction.”
• Jeffrey Risch, Smith Amundsen, LLC,will discuss “Public Bidding and RelatedLabor Laws.” A comprehensive review andupdate on prevailing wage law, responsiblebidder requirements and project labor agree-ments.
Midwest Construction Expo seminars willfeature:
• Minneapolis Utility Contractors Assn.(MUCA), Thomas Olson, Olson & Price
Ltd., will speak about “How Contractors getpaid for utility-related problems”
• Minnesota chapter of the LandImprovement Contractors of America(LICA)
• Associated Builders and Contractors(ABC)
• Association of General Contractors.(AGC)
• Commercial vehicle enforcement divi-sion of the Minnesota State Patrol, Jay K.Sletten, CVI Segeant, will address “MotorCarrier Enforcement Changes”
• Hennapin Technical College will pres-ent “Focus Four — the four main causes ofaccidents and citations on the job” and “SafeRigging Practices”
• Operating Engineers Local #49, WaynePederson, Local 49 Training Center, will lec-ture about “Trenching and Excavating —OSHA’s excavating standard and how andwhy trenches collapse”
More seminars for The ChicagoConstruction Expo and The MidwestConstruction Expo will be announced soon.
For more information on exhibiting, callBob Buckley, CEG Productions sales man-ager, at 800/992-7116.
For all other questions, call Sheila Kirby,CEG Productions trade show manager, at800/523-2200, or visit www.cegltd.com.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG
EXPOS from page 1
Page 46 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Steady Rains Keep Things Challenging on Rail Yard Job
to 18.8-in. (20 to 47 cm).“On average we are placing about 4,000
to 5,000 cubic yards per day depending onthe thickness we are paving,” Savoree said.“We try to complete each paving run in twodays, so if there is a problem on one day wehave to make up for it on the next day. Ourbiggest production day to date was 6,400cubic yards.”
“D” Construction placed 225,000 cu. yds.(172,000 cu m) of concrete and 450,000 tons(408,000 t) of stone.
Ragnar Benson is the general contractorbut there are numerous contractors workingon different elements of the project.
“Ragnar Benson broke the project up intoindividual contracts like earthwork, paving,electrical, etc.,” Savoree said.
Currently, the project has between 65 and90 people on site everyday, depending onhow many trucks are running.
World of ConcreteSavoree, Darin London and Tom Vancura,
all of “D” Construction, met Finkbiner’steam in Las Vegas for the annual World ofConcrete.
The “D” Construction team went there tolook at a machine that GOMACO had ondisplay.
“Brad Barkema from GOMACO and Itook Bill and Darin down to Phoenix in earlyMarch to watch a machine that was runningon an Arizona state highway job, using theIDBI technology,” Chad Cailteux ofFinkbiner, said. “Shortly thereafter, wereceived the order for all three machines.”
Finkbiner Equipment is a 40-year-oldcompany that has specialized in servicingthe road and highway contractors in Illinoisand surrounding areas.
Finkbiner Equipment Company is head-quartered in Burr Ridge, Ill.
GOMACO Corporation is headquarteredin Ida Grove, Iowa. GOMACO equipmentwill slipform concrete streets and highways,airport runways, curb and gutter, sidewalksand recreational trails, safety barrier, bridgeparapet and irrigation canals. Support equip-ment includes grade trimmers, concreteplacers, concrete placer/spreaders and tex-turing and curing machines. The companyalso offers equipment to finish flat slabs,bridges and slopes. GOMACO will consulton equipment for large or unique concretepaving projects.
For more information on GOMACO, visitwww.gomaco.com.
For more information on Finkbiner, visitwww.amstate.com.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG
Workers load dowel bars into the IDBI. Cement finishers work behind the GOMACO GP2800 concrete paver.
Pictured is the first truck dumping into the new machine.
Darin London (L), operator and paving foreman, and KenSandeno Jr., owner, look over paving operations.“Skip” checks the stiffness of the concrete for quality control.
RAIL from page 28
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 47
doosanportablepower.com© 2009 Doosan Infracore International, Inc.
INSISTon Quality
4100 Gardner Ave.Kansas City, MO 64120
816/241-9290
Joplin, MO417/781-8222
Brookline Station, MO417/887-2729
Wichita, KS316/838-3346
Topeka, KS 785/267-4345
Garden City, KS 620/275-1996
150 E. North AvenueVilla Park, IL 60181
630/530-7600630/530-1901
Alsip/Chicago708/389-7700
E. Peoria309/694-4455
Ingleside815/344-0880
Rockford815/227-0555
Springfield217/789-0351
McAllister Equipment Co.The Victor L. Phillips Company
carpenters really embrace the young tradesmen.”Sometimes apprentice programs are farmed out to com-
munity college campuses, which usually is a good fit. Butnot always. In LaCrosse, Wis., a carpenters program operat-ed for years by Western Technical College was taken back bythe local carpenters union. Class schedules were the prob-lem.
“They said their employers wanted training in what theycall block schedules,” said Bill Brendel, the school’s dean ofagriculture, apprenticeship and technology. The schooloffered classroom work for the apprentices one day every
other week for a total of 72 hours per semester. “Employers said they preferred to lose an employee for a
week at a time rather than to pull them out every otherMonday or something.”
Most of the school’s carpenter apprentices were union-sponsored. The school offers both union and non-uniontraining in some trades, though the classes are virtually iden-tical as required by the state’s Bureau of ApprenticeshipStandards.
“It is a workable situation,” Brendel said of the union/non-union classes, which are common across the country.“Unions have no problem bringing in non-union students.
There actually is more pushback from non-union employersfor having to send their employees to a union hall. They seethe classes as an opportunity for a union to cherry-pick stu-dents. It is kind of an uneasy situation in some respects.”
At a new craft teaching institution in Oregon, cooperativerelationships range beyond the union status of students. TheNorthwest College of Construction was formed four yearsago from the vision of college President Dan Graham.
Graham had been workforce manager of the Columbia,Ore., chapter of the AGC for 10 years when he proposed thatcontractor associations come together to establish a collegethat could, in the words of its mission statement, “promotelife-long learning by delivering craft, technical, supervisoryand management education to the construction industry.”
The college’s founding organizations are the PacificNorthwest chapter of Associated Builders and Contractors,the Homebuilders Association of Metropolitan Portland, theNational Utility Contractors Association of Oregon andSouthwest Washington, and the Columbia AGC chapter.They formed a non-profit, privately funded organization and
purchased and remodeled a 40-year-old facility on HolmanStreet in Portland.
“These trade associations often are competing,” Grahamsaid, “but the reality is they all recognize no one is makingmuch money in education. So it was easier to decide wecould pool our resources and create some economies of scaleand provide a better product. That logic really did win folksover.”
The president said the college has about 1,600 enrollments— “we count enrollments, not bodies, an important distinc-tion” — in this fourth school year of its existence. He is opti-mistic about the future.
“I think we are going to make it,” Graham said. “We arestill scrapping and of course in this economy everyone hastheir fingers crossed. I was just talking to some contractorsthat are really sweating bullets. By and large, contractors areour customers so we are watching the economy closely —the construction industry in particular, which as you know ispretty rough right now.”
The school operates eight merit apprentice programs, but
Programs Entail at Least 4,000 Hours of On-the-Job Training
see APPRENTICESHIPS page 52
APPRENTICESHIPS from page 24
“What we are focusing on inthe chapters is developmentof a lifelong career path fortradespeople. Skills training isa part of that.”
DDaann GGrraahhaammNorthwest College of Construction
Page 48 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Get Back 2 Work with performance-driven
attachments that show up ready to dig,
move, scrape, compact, clean, rake and drill
every day on your highway- and bridge-
related jobs.
Work with the brands that have always
delivered great results. To contact your
local Territory Manager, visit our Web site
and call us today.
Hundreds Of Tough Attachments8 Brands You Can Trust...
E-mail: [email protected]
* Contact your local territory manager for full details
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 49
KS1CUFF0012N -00218353
Naperville, IL 60563630/355-7150Fax: 630/355-7173South Holland, IL 60473708/331-6362Fax: 708/331-7334Rockdale, IL 60436815/730-9011Fax: 815/730-9036
Rockford, IL 60012815/961-3160Fax: 815/965-1810Wauconda, IL 60084847/526-7700Fax: 847/526-3565
WEST SIDE TRACTOR SALES CO.
Louisville, KY 40223502/253-37211-800/507-9705London, KY 606/862-84471-877/231-7151Bowling Green, KY42101270/842-34001-866/528-9699Richmond, KY859/623-20301-800/463-8722
Indianapolis, IN 46219317/544-34111-800/876-4690Lafayette, IN 47905765/447-69331-800/937-3355Bloomington, IN 47403812/333-96771-800/888-9677South Bend, IN 46619574/232-14611-877/248-1713Fort Wayne, IN 46825260/482-85761-877/845-5764
HOLT EQUIPMENT CO.
651 AIS Drive S.W.Grand Rapids, MI 49548616/530-20001-800/664-3303West Detroit56555 Pontiac TrailNew Hudson, MI 48165 248/437-81211-800/457-8121Traverse City777 US 31STraverse City, MI 49684231/943-39961-800/968-1110
JDE EQUIPMENT
Don’t be fooled by imitators. Thirty-plus years’ experience building the best hydrostatic dozers makes John Deerethe brand for you. Innovations, like Total Machine Control (TMC), allow operators to customize machine response and operation to their personal preferences. J-Series Dozers deliver unsurpassed productivity and uptime, along with the lowest possible daily operating costs.And that’s just for starters.
To learn all about John Deere J-SeriesDozers, give us a call.
Contact us soon.
Faster cycles. Higher productivity
Contact us soon.
These workmates put more work within reach.Name the job and there’s a 310SJ or410J Backhoe Loader to help you get it done. You’ll benefit from uptime-enhancing features such as advanceddiagnostic monitors, solid-state electronics, and an improved coolingsystem. Other advantages includeground-level service points, low maintenance costs, smooth and responsive hydraulics, and best-in-classresale value. Go for the Total MachineControl (TMC) and tool carrier optionsand take on even more work.
To put a 310SJ or 410J BackhoeLoader to work for you, give us a call.
www.johndeere.com
Page 50 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
precision
Komatsu compact excavators are right at home working in tight spaces. With advanced Proportional
Pressure Control (PPC) joysticks, these machines give you precise handling without sacrificing
speed, reach or capacity. Plus, they have all the features that make Komatsu excavators the choice
of owners and operators across the country.
• Low-effort Proportional Pressure Control (PPC) joysticks
• Spacious, ergonomically designed operator platform
• Industry-leading 360-degree visibility
• Tilt-forward operator cab structure for ease of service access
• Switchable excavator control pattern without tools (ISO/SAE)
When there’s no room for error, the choice is 100% clear. Put our compact excavators to work
today and enjoy the confidence that comes from machines that are…
100%
100% Komatsu. 866.513.5778 www.komatsuamerica.com
65 East Kingston Ave.Columbus, OH 43207614/443-6541614/443-9673 Fax Toledo, OH419/872-7101Cincinnati, OH513/771-3922
Richfield, OH330/659-6681Cadiz, OH740/942-8871Dayton, OH937/879-3154
Canton, OH330/453-4521Painesville, OH440/352-0452Jackson, OH740/288-0222
5633 W Hwy 13Savage MN 55378952/895-9595800/888-9515Duluth, MN 218/727-8671800/888-9535Grand Rapids MN218/328-5916800/459-5916
Virginia MN218/741-9011800/752-4304Des Moines IA218/741-9011800/555-1445Sioux City IA712/252-0538800/633-9104
Cedar Rapids IA319/363-9655800/616-6615Milan, IL309/787-1742800/633-9114
4300 W Main AveFargo ND 58103800/437-2924701/364-2190 Fax 905 20th Avenue SEMinot ND 58072800/825-0479
2300 Vermont AvenueBismarck ND 58504800/279-4437
COLUMBUS EQUIPMENT COMPANYwww.columbusequipment.com
ROAD MACHINERY & SUPPLIES COMPANYwww.rmsequipment.com
GENERAL EQUIPMENT & SUPPLIESwww.genequip.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 51
AIS CONSTRUCTIONEQUIPMENT CORP.www.aisequip.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000Fax: 517/321-4191Grand Rapids600 44th Street S.W.Grand Rapids, MI 49548616/538-2400Fax: 616/538-0449Northeast Detroit65809 Gratiot AvenueLenox, MI 48050586/727-7502Fax: 586/727-7311Saginaw4600 AIS DriveP.O. Box 253Bridgeport, MI 48722989/777-0090Fax: 989/777-1583Traverse City8300 M-72 EastWilliamsburg, MI 49690231/267-5060Fax: 231/267-5257
BRANDEIS MACHINERY & SUPPLY COMPANYwww.brandeismachinery.com1801 Watterson Tr.Louisville, KY 40299502/491-4000502/499-3195 Fax Evansville, IN812/425-4491812/425-1171 Fax Corbin, KY606/528-3700606/528-9014 FaxLexington, KY859/259-3456859/254-0783 Fax Stanville, KY606/478-9201606/478-9208 Fax Paducah, KY270/444-8390270/575-4907 FaxIndianapolis, IN317/872-8410317/872-8417 Fax Ft.Wayne, IN260/489-4551260/489-1620 Fax South Bend, IN574/233-8770574/233-8775 Fax
ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711800/252-2926Bolingbrook, IL630/739-7474800/826-9608Carterville, IL618/985-3399800/274-7202Marengo, IL815/923-4966800/765-2635Portage, IN219/764-8080888/764-8226Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330800/274-7230Cape Girardeau, MO573/334-5252800/274-7210Columbia, MO573/814-0083800/274-7212Palmyra, MO573/769-2056800/274-7214600 Liberty Street,Green Bay, WI 54304920/435-6676920/435-5454 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville WI 262/835-2710262/835-2844 Fax Wausau, WI715/355-9898715/241-0044 Fax
Komatsu America Corp. LaunchesHD785-7 Off-Highway Dump Truck
Komatsu America Corp.’sHD785-7 off-highway truckwith Tier II engine features apowerful, clean KomatsuSAA12V140E-3 tur-bocharged, after cooledengine that provides a maxi-mum net output of 1,178 hp(878 kW). The engine isEPA Tier II emission certi-fied.
The truck is equippedwith Komtrax technology,which sends machine oper-ating information to a secureWeb site utilizing wirelesstechnology. Data such asoperating hours, location,cautions and maintenancealerts are relayed to the webapplication for analysis. TheKomtrax fleet monitoringsystem increases machineavailability, reduces the riskof machine theft, allows forremote diagnosis by the dis-tributor, and provides awealth of other informationto drive business efficientlyand productively.
High Performance for Enhanced ProductivityThe truck’s engines deliver faster acceleration and higher
travel speeds with high horsepower per ton. High torque atlow speed, impressive acceleration and low fuel consump-tion ensure maximum productivity, according to the manu-facturer.
The mode selection with Variable HorsePower Control(VHPC) system selects the appropriate mode (either poweror economy) based on the working condition. The VHPCsystem detects the truck’s load and selects the optimumhorsepower setting mode, providing high production andlow fuel consumption.
The fully automatic transmission selects an optimum gearaccording to the travel and engine speed. To reduce fuel con-sumption, the shifting point is automatically selecteddepending on the machine’s acceleration. The automaticretard speed control system (ARSC) with a large capacityretarder allows operators to set downhill travel speed at aconstant level so the operator can concentrate on steering. Itscooling oil temperature is consistently monitored so thespeed is automatically reduced if the retarder oil temperaturerises.
The Komatsu designed electronically controlled all clutchmodulation system with K-ATOMiCS optimizes the clutchengagement oil pressure at every gear for smoother shiftingwith minimal torque shock. The HD785-7 features an extra-long wheelbase, a wide tread and an exceptionally low cen-ter of gravity to haul its load at higher speed for greater pro-ductivity and deliver superior driving comfort over roughterrain.
Enhanced Cab Design The HD785-7 is equipped with an ergonomically
designed cab that provides a quiet and comfortable operatorenvironment. The spacious cabs are mounted with viscousmounts to keep noise at a minimum and provide a low-vibra-tion operating environment. A low effort body dump controllever makes dumping loads easier, according to the manu-facturer.
The pedal-operated secondary brakes activate the frontdisk brakes and parking brakes. When hydraulic pressuredrops below the rated level, the parking brake is automati-cally activated. The five-way adjustable operator seat and thetilt-telescopic steering column provide an optimum drivingposture for increased driving comfort and better control overthe machine’s operation.
Durability and Reliability Flat face-to-face O-ring seals are used to securely seal all
hydraulic hose connections and to prevent oil leakage. Themain harnesses and controller connectors are equipped withsealed DT connectors that provide reliability and dust andwater resistance. The fully hydraulic controlled wet multiple-disc brakes ensure reliable and stable brake performance.Wet disc brakes are fully sealed to keep contaminants out,reducing wear and maintenance. Both the filters and greas-ing points are centralized for easier servicing.
To minimize operating costs, oil change intervals areextended to 500 hours for engine oil and 4,000 hours forhydraulic oil. The Vehicle Health Monitoring System(VHMS) controller monitors the health conditions of majormachine components, enabling remote analysis of themachine and its operation.
For more information, visit www.komatsuamerica.com.
Komatsu’s HD785-7 off-highway truck features a Komatsu SAA12V140E-3 tur-bocharged, after cooled engine that provides a maximum net output of 1,178 hp(878 kW).
Page 52 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Victor L. Phillips Co.4100 Gardner Ave.
Kansas City, MO 64120816/241-9290816/241-1738
Apprenticeship Enrollment,Craft Training at All-Time Highanyone is welcome to enroll and unionmembers quite often do. Laborer and heavyequipment apprenticeship classes are“steaming along quite nicely,” Graham said,possibly because public funding is at presentflowing most heavily into highway andbridge construction projects. Some appren-ticeship programs, such as the one servingtile setters, are under-enrolled because ofminimal work for residential constructioncontractors, which are “just getting ham-mered” by the economy, Graham said.
Like similar institutions across the coun-try — actually, Graham is not aware of anyothers configured quite like NCWW — thecollege has twin goals of upgrading skill lev-els in the industry and swelling the ranks ofskilled workers. Graham said the sponsoringassociations support both efforts.
“We were sponsored by the industrylocally for the training, but they really wantus to spend a fair amount of our energy inrecruiting. We are always in a recruitmentmode. We have been watching the demo-graphics of our industry for 10 years. Weknow what the average age of journeymentradespeople are. The pool is pretty old andwe know we are going to have to get newpeople in the industry.
“There are a lot of people on the benchright now,” Graham said of layoffs that markthe economic times, “and that makes it achallenge to bring new people in. Those laidoff will go back to work before we can hirenew people. But we are seeing apprenticesbeing hired right now and apprenticeshipenrollment is at an all-time high.”
One of the challenges facing the adminis-tration is to identify serious candidates forapprentice training as opposed to those whoin the economic downturn are just bidingtheir time at an employer’s expense.
“Some are interested in a career in con-struction but then decide it isn’t what theyhad in mind. There is always a weeding out,”the president said. “Just this morning I wasthinking about how to get people to get tothat decision sooner rather than later.Apprentices are all paid for by employers, soit is real easy just to show up and let some-one else pay the bill.”
Local chapters of Associated Builders andContractors frequently partner with commu-nity colleges for apprenticeship classes, saidTodd Staub, ABC’s director of craft training.
“What we are focusing on in the chaptersis development of a lifelong career path fortradespeople. Skills training is a part of that.”
Staub is enthusiastic about a second edu-cational track being offered employers —craft training. In this program, studentsreceive the identical classroom instructionand hands-on training as apprentices butsometimes for shorter duration. Craft train-ing targets companies that want a way toraise the formal skill level of their employeeswithout jumping through the hoops requiredby formal apprenticeship agreements. Itappeals to contractors who are not workingon public sector projects with obligatoryapprenticeship contractual language.
A curriculum, certified instruction andaccreditation for craft training are providedby the 13-year-old National Center forConstruction Education and Research,which is affiliated with the University ofFlorida. The not-for-profit foundation’saccreditation gives a certified graduate aportable credential.
“Upon graduation,” said Staub, “a personhas third-party accreditation he can carrythroughout his career that says, ‘I have beentrained to do this.’ We are looking for thelifelong learner in this industry and if wehave something to engage these people fromthe beginning, if we can attract the right peo-ple into the industry, they will develop andstay in the industry for their entire career.Overall, we look at it as one of the pieces ofthe puzzle” in meeting the looming workershortage.
ABC gives craft training participants anextra incentive by once a year bringingtogether the top students from each center inthe country in a national craft skills champi-onship. In two days of competition, studentsvie for cash and tool prizes. Some 130 stu-dents are expected to compete in about adozen crafts at ABC’s convention in SanDiego, Calif., in February.
Staub said the industry must offer today’syoung people real choices in making andpursuing career decisions.
“We are dealing today with people whowant options, who want information to makean informed decision. Apprenticeship andcraft training are two of those options.”
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG
APPRENTICESHIPS from page 48
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 53
Howell Tractor811 Sivert Drive
Wooddale, IL 60191-2611884477//443399--22115500
Fax: 630/595-3855
2770 May RoadPeru, IL 61354880000//334422--66007722
Fax: 815/224-2538
480 Blaine StreetGary, IN 46406880000//885522--88881166
Fax: 219/977-4220
5444 11th St.Rockford, IL 61109
888888//446699--33555555Fax: 815/874-3034
The Victor L Phillips Company4100 Gardner Ave.
Kansas City, MO 64120881166//224411--99229900
Garden City KS662200//227755--11999966
Topeka KS778855//226677--44334455
Wichita KS331166//883388--33334466
Joplin MO441177//778811--88222222
Springfield MO441177//888877--22772299
Mid Country Machinery3478 5th Ave South (Bus. Hwy 20)
Fort Dodge, IA 50501880000//220066--55993366
4734 Sergeant Rd. (Hwy 63)Waterloo, IA 50701
331199//223344--88771100
106 8th StreetSergeant Bluff, IA 51054
771122//994433--44447700
Page 54 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Alex PowerEquipment111 50th Ave. W.Alexandria, MN 56308320/763-4994Fax 320/763-5428
Burris Equipment Co.2216 N. Green Bay Rd.Waukegan, IL 60087847/336-1205Fax 847/336-2697
27939 W. Concrete Dr.Ingleside, IL 60041815/363-4100
ITS RESUME WAS ALREADY IMPRESSIVE –NOW THERE'S AN EVEN BETTER ANGLE.
The New Kubota KX161-3 Angle Blade with Float
Angle blade with float significantlyincreases productivity
Advanced load sensing hydraulic systemTight tail swing – only 4 inches11,118 lbs breakout force (bucket)4,967 lbs breakout force (arm)
www.kubota.comEVERYHING YOU VALUE
Ruling Could Lead to Billions of Dollars to Katrina VictimsBy Cain BurdeauASSOCIATED PRESS WRITER
NEW ORLEANS (AP) The U.S. federalgovernment could be vulnerable to billionsof dollars in claims after a judge ruled thatthe Army Corps of Engineers’ failure toproperly maintain a navigation channel ledto massive flooding in Hurricane Katrina.
U.S. District Judge Stanwood Duval onNov. 18 awarded seven plaintiffs $720,000,but the government could eventually beforced to pay much more. The ruling shouldgive more than 100,000 other individuals,businesses and government entities a bettershot at claiming damages.
Duval sided with six residents and onebusiness who argued the Army Corps’shod-dy oversight of the Mississippi River-GulfOutlet led to the flooding of New Orleans’Lower 9th Ward and neighboring St.Bernard Parish. He said, however, the corpscouldn’t be held liable for the flooding ofeastern New Orleans, where two of theplaintiffs lived.
The ruling also is emotionally resonantfor south Louisiana. Many in New Orleanshave argued that the flooding in the after-
math of Katrina, which struck the regionAug. 29, 2005, was a manmade disastercaused by the Army Corps’ failure to main-tain the levee system protecting the city.
“Total devastation could possibly havebeen avoided if something had been done,’’said Tanya Smith, one of the plaintiffs. “Alot of this stuff was preventable and theyturned a deaf ear to it.’’
Smith lived in Chalmette close to thechannel when Katrina hit. She was awarded$317,000 in property damages, the most ofany of the plaintiffs.
Duval referred to the corps’ approach tomaintaining the channel as “monumentalnegligence.’’
Joe Bruno, one of the lead lawyers for theplaintiffs, said the ruling underscored theArmy Corps’ long history of not properlyprotecting the New Orleans region.
“It’s high time we look at the way theseguys do business and do a full re-evaluationof the way it does business,’’ Bruno said.
He said he expected the government toappeal.
The corps referred calls seeking com-ment to the Justice Department. SpokesmanCharles Miller said the government would
review the judge’s ruling before making anydecision on how to proceed.
During trial testimony, governmentlawyers and experts argued the levee systemwas overwhelmed by the massive storm,and levee breaches couldn’t solely beblamed on the shipping channel dug in the1960s as a short-cut between the Gulf ofMexico and New Orleans.
The corps also had unsuccessfully arguedthat it is immune from liability because thechannel is part of New Orleans’ flood con-trol system.
In his 156-page ruling, Duval said he was“utterly convinced’’ that the corps’ failure toshore up the channel “doomed the channelto grow to two to three times its designwidth’’ and that “created a more forcefulfrontal wave attack on the levee’’ that pro-tected St. Bernard and the Lower 9th Ward.
“The Corps had an opportunity to take amyriad of actions to alleviate this deteriora-tion or rehabilitate this deterioration andfailed to do so,’’ Duval said. “Clearly theexpression ‘talk is cheap’ applies here.’’
Ahead of Duval’s ruling, experts had saidit would likely have consequences for theway the Army Corps does business nation-
wide.Pierce O’Donnell, another lead plaintiffs
lawyer, said the ruling was the “first timeever the Army Corps has been held liablefor damages for a major catastrophe that itcaused.’’
The plaintiffs lawyers would likeCongress to set up a compensation fund tospeed up payments to the thousands of oth-ers whose claims must still be heard incourt.
At a one-month trial in May, expertsclashed over the causes of flooding and thechannel’s contribution to it.
Government experts argued the leveesand floodwalls would have failed regardlessof whether the channel had been dug.
By contrast, the plaintiffs’ team of expertssaid the outlet became a “hurricane high-way’’ that funneled storm surge into NewOrleans. They said that without the channel,the flooding would have been minimal.
The lawsuit was the first major caseagainst the federal government over Katrinaflooding to go to trial. Adecision rested withDuval because a jury cannot try a caseagainst the federal government.
GILBERTSVILLE, Ky. (AP) New highway bridgesbelow Kentucky Dam are complete.
The twin spans that carry U.S. 62 and U.S. 641 opened totraffic in late November.
The Paducah Sun reported the new highway bridges andone that is already carrying Paducah & Louisville Railwaytrains were needed so construction can begin on a new lockon the Tennessee River.
Traffic between the Kentucky Dam Village State ResortPark and Grand Rivers formerly crossed the dam.
Department of Highways District 1 chief engineer JimLeFevre said eliminating the detour to Interstate 24 thatbegan in September will help commuters and tourism in thelakes region.
New Twin BridgesBelow KentuckyDam Completed
What’s going on in your company?We want to know!
Give us a call.Construction Equipment Guide
800/523-2200 or FAX 215/885-2910
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 55
SEMINARS & TRAINING SESSIONSLICAUCA
US Department of Labor - OSHAJulie Onecall
EXHIBITSCome see the latest makes and models of
Construction Equipment, including Caterpillar, John Deere, JCB, Gehl, Case and More!
Trucks, Trailers, Attachments,Contractor Supplies and Services
Page 56 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WSDOT Resurfaces Highway 172 in Brown Countyneering consultant Graef-USA Inc., of Green Bay, Wis.Delayed work would also have affected traffic for the GreenBay Packers stadium, which is located along Highway 172.
Highway 172 is a major east-west road in the northernregion of the state in Brown County, Wis., that averagesabout 85,000 vehicles a day and serves as the southern beltline around the Green Bay area, the state’s third largest city.The traffic on this highway serves both the local commutertraffic and regional traffic. The project includes segments ofthe village of Ashwaubenon, village of Allouez and villageof Bellevue in Brown County. Completion of this $38 mil-lion highway project will prepare it to handle more trafficwhen upgrading of U.S. 41 begins in 2011.
Work on the Highway 172 project is scheduled for 2008through 2010 to ensure that maintenance needs on this high-way are minimized during the U.S. 41 construction. Theproject repairs and resurfaces the existing roadway fromU.S. 41, on the western end of the project, to Interstate 43, onthe eastern end of the project. The project also will replacethe deck on the Fox River Bridge, replace the bridges overOneida Street and rehabilitate nearly all bridges on the proj-ect, roughly 20.
Construction of Highway 172 began in September 2008and is to be completed by September 2010. Project bench-marks include completing westbound lanes prior to August2009, completing eastbound lanes prior to August 2010 andopening Oneida Street prior to July 15 in 2009 and 2010.
“When working on a rehabilitation project that is this largeit is difficult to know how well things will go, but everythingwent well in 2009,” Van Hout said. “Everything was aheadof schedule or right on time.”
Dan Segerstrom, project manager of the Green Bay, Wis.,area Department of Transportation added, “To make thecompressed time frame work smoothly, a lot of detailedcoordination was needed.
The 2009 portion of the project was done in halves so traf-fic was minimally affected, Van Hout said, without creatingthe need for an official detour. Much of the traffic foundalternate routes, which kept the delays to a minimum. Lanesin both directions on the east end of the project are now com-pleted, leaving the west end of the project for 2010.
Segerstrom explained that the project included widening
some of the bridges in order to add auxiliary lanes. Highway172 includes four to six lanes of traffic, which were repairedusing concrete overlay. In the area next to the Packer stadi-um, a seventh auxiliary lane was added to help with trafficflow, Segerstrom said, and next year an additional lane willbe added in that same area for the other half of the project.
The bridge over Oneida Street was removed and replacedto include an auxiliary lane at the location of the Packers sta-dium. Oneida was increased from four to six lanes. OneidaStreet under the bridge also was widened for possible futureexpansion, Segerstrom added.
To aid in the safety of Highway 172, three crash investi-gation sites also were added to allow vehicles to move off theFreeway, assuming the cars are able to get to that point,Segerstrom said. The crash investigation sites include an exitramp and a turnout area for the vehicles to get out of traffic.
For roadway work, shuttle buggies were used with theasphalt pavers. Trucks dump asphalt into the shuttle buggy,which feeds the material into the paver, so the trucks are notconstantly bumping into the pavers and there is less segrega-tion, resulting in a better ride, Van Hout explained.
On the Webster Street bridge over Highway 172, amicrosilica overlay was used. Using the microsilica admix-ture created a higher cost for the contractor, but the process
was quicker, to help ensure the fall deadline was met.Microsilica is denser and even though it is not used much inthis region, it was chosen because it has a very high slumpand low permeability while maintaining high strength; ahigher slump means that the crown could be placed with aregular Bidwell, just one pour vs. two, Van Hout explained.It was used in only one portion of the project in order to testsomething new to this area; however, it has been used inother parts of the state. Microsilica is a little more finickybecause it is more prone to early cracking, so finishing andcuring was done more diligently, Van Hout added.
The bridge over the Fox River, is very large with each sidebeing separate, but connected enough at the abutments torequire traffic be stopped while concrete pours were done.The bridge was removed during the winter months to accel-erate work during the summer; the same will happen thiswinter to prepare for construction of the second half of con-struction of the Fox River Bridge, Segerstrom added. Bargesand tugs were used to help with debris collection, whileremoval of concrete was done with backhoes and loaders.About a half dozen cranes, up to 100 tons (90.7 t) in size,were used for bridge work and to help place barriers.Concrete on the Fox River Bridge was discharged from theexisting adjoining bridge lane using two belt systems.
Work was done at night to ensure the least impact to traf-fic and workers. Working at night is relatively new to theGreen Bay area. The focus, Segerstrom said, is on safety forthe workers. The majority of the work, however, was doneduring the day, he explained, but some was done at nightbecause of the divided highway so traffic could be moved tothe other side. Ramp closures also were done at night to min-imize public inconvenience.
Each side of the Fox River Bridge contains three lanes, soto ensure safety during construction, Segerstrom said theylooked at using a moveable barrier to allow two lanes of traf-fic during the morning and during the evening traffic rushesbut crews determined there wasn’t anything to warrant that.It was decided instead that there would be two lanes of traf-fic in one direction, and one lane in the other direction, dur-ing both summers of construction.
(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG
WSDOT from page 1
Bidwell pavers were used during much of the rehabilitation work on Highway 172,which is a southern beltline around the Green Bay, Wis., area. Highway 172includes four to six lanes of traffic, which were repaired using concrete overlay.
For safety reasons, work was sometimes done at nightto ensure the least impact to traffic and workers.Working at night is relatively new to the Green Bayarea, but night work made it possible to move traffic tothe other side of a divided highway.
For roadway work, shuttle buggies were used with the asphalt pavers. Trucksdump asphalt into the shuttle buggy, which feeds the material into the paver, so thetrucks are not constantly bumping into the pavers and there is less segregation,resulting in a better ride.
Crushing, Screening &
Recycling Section
You could say this family-establish min-ing operation represents the backbone ofeastern Kentucky contour coal mining. It’sresourceful, good to its employees, andobservant of the rules and regulations lead-ing to good stewardship of the land theymine — the Appalachian Mountains.
“My father learned how to mine from hisfather,” said Jeff Dean, whose father, AubraPaul Dean, founded JAD Coal. “He beganmining on his own around 1970, and thecompany remained a family operation forover 30 years. We recently joined forceswith U.S. Coal Corporation, which wasformed to acquire both us and Licking RiverResources. But we’re still privately ownedand privately funded.”
JAD Coal is currently contour miningthree different mountains near its home basein Coldiron, Ky. According to SurfaceForeman Harvey Henderson, the mine wasworked on a limited scale in the late 1950swhen seams were augered with little bench-ing.
“Back then they didn’t have the rightequipment. Today we take bigger cuts, buildbigger benches, and use a really transforma-tional machine — the highwall miner. Our
highwall miner allows us to go way pastwhere the little auger holes quit and get intosolid coal. It goes back a thousand feet or so.When we’re done, nobody will be comingbehind us. We extract it all.
“We have a good idea where the coal is,but make multiple core-sampling holes anduse GPS-plotting machines to create a mapof the area we intend to mine. Then, armedwith that knowledge, we make a specificplan for opening up a relatively small portionof the mountain to reveal, through separatebenches, the two or three thin seams of coalwe’re after.
“From then on, we focus on getting thebench built, extracting coal, and preparingfor our highwall miner to dig out almost allof the seam. When the miner is done, recla-mation starts immediately.
“We’re constantly working the seams,”continued Henderson. “We blast at leasttwice a day, and sometimes three or fourtimes. We’re working the seams all the wayaround the mountain. On average the seamsare 30 inches thick. We advance about 500feet at a time so that there’s enough coalopened up for the miner. The overburden isloaded onto the haul trucks and the coal is
either loaded directly into highway trucks ordumped on the bench for future loading. Weuse smaller Hitachi excavators for the recla-mation.
“We make 10-foot lifts because of theirreach. So, we make our lifts, saving our dirtfor the outside slopes. We step in two feet forevery 10 feet up, and we use the excavators
to make everything work. It’s a lot safer thanusing dozers. And, by keeping our reclama-tion work caught up, we don’t have to carrymaterial as far. Once we’re done smoothingthe ground with the excavators, we leave aroad every 80 feet up so a vegetation pack-age can be sprayed.”
JAD Coal: All in the Family
Smaller Hitachi excavators are used for reclamation.
Four EX1200-sized Hitachi backhoes and one EX1900 account for all overburdenremoval. Harvey Henderson, surface foreman for all mines operated by JAD Coal.
see JAD page 58
Page 58 • December 12, 2009 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Fecon IntroducesFRM70 Rotary Brush Hog Brush Cutter
Fecon has added the FRM70 heavy duty rotary brush hogbrush cutter to its line of brush cutting attachments and trackcarriers.
The FRM70 brush hog brush cutter features a reinforcedfront push bar design to direct and push trees over. Cuttingproductivity is maximized with a bi-directional direct drivegear motor and four 12 in. (30.5 cm) dual-sided rotary axeblades offer cutting action on both sides.
The FRM70 cuts brush up to 6 in. (15 cm) in diameter.The straight sides and flush to the ground design allow theFRM70 to contain material and provide better sizing. And,the smooth deck surface minimizes debris build up, accord-ing to the manufacturer.
The FRM70 brush cutter also features a hydraulic brake tostop the rotor quickly and safely.
Designed to fit skid steer loaders running 21 to 45 gpm(79.5 to 170 Lpm), Fecon’s FRM70 rotary brush cutter isuseful for clearing right-of-ways, debris, pre commercialthinning, fuel load reduction, habitat restoration, park trailsand path maintenance.
For more information, call 800/528-3113 or visitwww.fecon.com. The FRM70 brush hog brush cutter features a reinforced front push bar design to direct and push trees over.
Hitachi Excavators Chip in for Family Mining BusinessCounting on Hitachi
The company is mining the three areas with twoEX1100s, two EX1200s, one EX1900, and a fleet of14 Euclid R-85 and R-90 rigid trucks. A fleet of foursmaller Hitachi backhoes, in the ZX350 range, per-form the reclamation.
“The 1900 has 20-some thousand hours on it andwe’ve had to replace maybe three or four hoses on it.We had a factory motor problem, but it was replacedby Hitachi, and that was 12 to 13,000 hours ago. Youhardly ever have a breakdown,” said Henderson.
Sometimes, their EX1900 works side-by-side withthe new EX1200-6. Surprisingly, the smaller machinemore than holds it own.
“The 1900 is faster, of course, because it takes abigger bite. But after a day of loading 90-ton trucks,it’s only 10 to 15 loads behind out of a total of 240 to245 loads.”
The Euclid trucks are all 1980s and early 1990models with high hours.
“We’ve had extremely good luck with the trucks,”noted Henderson. “Everything wears out, but fordurability, the Euclid trucks have been excellent.”
The JAD Coal Division of U.S. Coal Corporationis serviced by Rudd Equipment Company, Corbin,Ky.
This story was reprinted with permission fromHitachi Americas’ Mines & Quarries Magazine,Fourth Issue 2009.
JAD from page 57
The Hitachi EX1200-6 helps JAD Coal start the contour-mining process.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 12, 2009 • Page 59
Industries Served: Limestone, Sand & Gravel, Recycling, Top Soil, Mulch, Compost, Ready Mix Asphalt, Demolition
CRUSH IT.....SHRED IT.....
SCREEN IT.....GRIND IT.....
2006 Extec E7 Apron Feeder Screen ....Please Call for PriceIf you’re looking for an Apron Feeder, you can’t beat this one!
2007 Extec C12+ Jaw Crusher ............Please Call for PriceThis machine is in excellent shape!
6551 Wales RoadNorthwood, OH 43619
(800) 941-6553
(419) 693-5000
Fax: (419) 693-5008
SCREENERS • CRUSHERS • PARTS • SERVICE • RENTALS
Doppstadt • Extec • Fintec • Lippmann • Sandvik • Cemco
2001 USA Star Screen 4020 Screen ..........Please Call for Price
NEW 2008 Extec S6 Flat Deck Screen ..Please Call for PriceOnly 1 Left!
(2) 2007 Doppstadt SM617 Trommel ....Please Call for PriceGreat machines for the money!
All of our rented machines are serviced and maintained by us for peak performance.
www.hallindustrial.com
Page 60 • December 12, 2009 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Screening Buckets & Amphibious Excavators
Big Float Amphibious Excavators������������ �������������������������������������������������������������������������������������
REMU Screening BucketsEven more productive than big trommels!
������� ������������������������������������������������������������������������������� �������������
���������� ������� � ��� ��������� ������ �����������
2009 Tub Grinder
These Grinders Mean Business
3010T Tub Grinder with Track System
Power up your productivity with the impressive fleet of grinders from DuraTech. All DuraTech grinders feature enclosedengine compartments with self-cleaning rotary screens on the air intake and HPTO microprocessor-controlled clutches.They are equipped with CAT diesel engines ranging from 325hp to 950hp. DuraTech takes on heavy-duty jobs with thehighest level of efficiency.
SwanstonEquipment Co.
3450 West MainFargo, ND 58103
888-792-3192
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 12, 2009 • Page 61
SALES • SERVICE • RENTAL • PARTSSALES • SERVICE • RENTAL • PARTS
EFFICIENCY + RELIABILITY = PROFITCALL ON THE EXPERTS.
CONTACT YOUR LOCAL POWERSCREEN PEGSON DEALER TODAY
Setting the standard in portable screening, washing, crushing & recyclingequipment. Count on Powerscreen Pegson and our team of sales experts to provide the right solution for your quarry, mining or recycling needs.
Serving
INDIANAPowerscreen of Indiana, Inc.
309 W. Stocker StreetAngola, IN 46703
(260) 665-5816www.powerscreenindiana.com
Serving
MINNESOTATheco, Inc.
5470 Quam Ave. NESt. Michael, MN 55376
(800) 776-0335www.thecoinc.com
Serving
OHIOAGGCORP
P.O. Box 219Westerville, OH 43086
(614) 309-6854www.aggcorp.net
Page 62 • December 12, 2009 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
1-514-909-2200
recycling without limits
impact or jaw choice is yours
one machine - unlimited possibilitiesdeale
r inquir
ies in
vitedpatented duplex system
IROCK Crushers was featured on 21st Century Businesson Fox Business Network Nov. 14 and can also be seen onYouTube.
Recycling concrete, asphalt and demolition debris is a hottopic today.
As a result, IROCK President Ken Taylor and the teamhave created a video that demonstrates how IROCKCrushers is addressing this market opportunity for its cus-tomers by building a machine that is specifically designed tohandle the daily challenges customers face in recycling con-crete, asphalt and demolition debris.
“IROCK Crushers LLC is recognized in the industry forthe quality and durability of their crushers,” said SeanDonaghy, national sales manager, IROCK Crushers LLC.“IROCK Crushers are built with the highest quality compo-nents available, including a heavy-duty chassis, oversizedshafts and bearings, class ll gear boxes, Caterpillar dieselengines, and many other unique features. Combining thesefeatures with the standard crusher discharge ‘ROCK BOX’and the patented Hydraset Hopper system, IROCK cus-tomers can expect years of productive and reliable servicefrom their equipment.”
JL Haber, vice president of programming of Multi MediaProductions, added: “IROCK Crushers is an exciting com-pany with a unique mission. We are excited to have them asa guest on our program.”
IROCK CrushersFeatured on FoxBusiness Network
What’s going on in
YOUR COMPANY
We want to know!
Give us a call.
ConstructionEquipment
Guide
(800)523-2200
OR
FAX:(215)
885-2910
VV iissiitt CCEEGG’’ss WWeebb SSii ttee aattwww.constructionequipmentguide.com
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 12, 2009 • Page 63
Mobile Crushing and Screening in Action
The unification of the Extec and Fintec brands within the Sandvik group of companies has created the world’s most comprehensive and dynamic line-up of mobile crushing and screening equipment. The Sandvik Mobile Screening and Crushing range now delivers all the familiar characteristics of productivity, versatility and exceptionally low running costs, but they are now combined with levels of durability and aftersales support that are synonymous with the Sandvik name. New name, improved service, same great product.
SANDVIK MOBILE CRUSHERS AND SCREENS 300 TECHNOLOGY CT, SMYRNA GA 30082 USA T: +01 (0) 404 589 3820 F: +01 (0) 404 589 3920 [email protected] www.miningandconstruction.sandvik.com
Page 64 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
December 14-15, 2009 – Winter Conference. OhioContractors’ Assoc. Winter Conference Midwest, Columbus, OH.For more information call 800-229-1388 or 614-488-0724.
January 10-13, 2010 – EXPO ‘10. National UtilityContractors Association Utility Construction Expo, Walt DisneyWorld Dolphin Hotel, Orlando, FL. NUCA is located in Arlington,VA. Call 703-358-9300 for further information.
January 13-15, 2010 – EXPO ‘10. AG CONNECT Expo -Preview Day January 12, 2010 (by special admission),Orlando, FL. AG CONNECT Expo provides a world-class interna-tional forum for agriculture industry professionals to share glob-al agricultural ideas and management trends. For informationplease call 800-867-6060.
February 7-10, 2010 – SHOW. THE RENTAL SHOW returns toOrlando, FL at the Orange County Convention Center. The showwill be in the North-South building, which is where the 2006Show was held. Exhibitors and Rental Store Attendees can call800-334-2177.
February 9-10, 2010 – EXPO. Pittsburgh Construction EXPOto be held at the Monroeville Convention Center, Monroeville, PA.For ticket and further information, please contact Sheila Kirby(800523-2200) or Bob Buckley (800-992-7116) atConstruction Equipment Guide, Ft. Washington, PA.
February 24-25, 2010 – EXPO. Chicago, IL ConstructionExpo to be held at the Schaumburg Convention Center,Schaumburg, IL. For tickets and further information please con-tact Sheila Kirby (800-523-2200) or Bob Buckley (800-992-7116) at Construction Equipment Guide, Fort Washington, PA.
February 27 to March 3, 2010 – International Hardware Fair.International Hardware Fair Cologne 2010, Cologne, Germany.For more information regarding this event contact Chris Beavers,Koelnmesse, Inc. at 773-326-9928.
March 9-10, 2010 – EXPO. Philadelphia Construction EXPOto be held at the Greater Philadelphia Expo Center, Oaks, PA. Forticket and further information, please contact Sheila Kirby(800523-2200) or Bob Buckley (800-992-7116) atConstruction Equipment Guide, Ft. Washington, PA.
March 17-20, 2010 – CONVENTION ‘10. Mark your calen-dar! AGC’s 91st Annual Convention will be held at the MarriottOrlando World Center in Orlando, FL. More information will beposted as soon as it is available.
March 18-19, 2010 – EXPO. Midwest Construction Expo tobe held at the Minneapolis Convention Center, Minneapolis, MN.For tickets and further information please contact Sheila Kirby(800-523-2200) or Bob Buckley (800-992-7116) atConstruction Equipment Guide, Fort Washington, PA.
June 1-5, 2010 – EXPO. ConExpo Russia 2010, CrocusInternational Exhibition Center, Moscow, Russia. ConExpoRussia is a new construction exhibition supported by theRussian government, Russian contractor groups, and the man-ufacturers who exhibit. It is the gathering place of the construc-tion, utility and forestry industries in Russia and surroundingstates, featuring the latest in equipment technologies and edu-cation. The Russian construction industry is booming. With con-tinued growth potential and infrastructure projects in the nonres-idential construction, forestry and utility industries, companiesare looking to the Russian market to expand their enterprise. Formore information visit: www.conexporussia.com and email:[email protected] and phone: 800-867-6060.
March 22-26, 2011 – EXPO. CONEXPO-CON/AGG, LasVegas, Nevada, U.S.A. CONEXPO-CON/AGG will be the world’slargest international gathering place in 2011 for the constructionand construction materials industries, showcasing the latestequipment, services and technologies. For more information,visit: www.conexpoconagg.com; E-mail: [email protected] or phone: 800-867-6060.
March 22-26, 2011 – International Exposition. Las Vegas,Nevada, U.S.A. IFPE 2011 - the International Exposition forPower Transmission is the leading international exposition andtechnical conference for hydraulic, pneumatic, electrical andmechanical power transmission components, systems and con-trols. For information visit: www.ifpe.com; E-mail:[email protected] or phone 800-867-6060.
BusinessCalendarLow Operating Height Allows Case’s650L to Work Around Low Overhangs
Case Construction Equipment added the 650L to itscrawler dozer line. The new Case 650Lcrawler dozer is idealfor residential job sites and confined commercial work areas.
The 650L retains the features of the Case crawler dozerline, such as hydrostatic drive, a comfortable operator com-partment, two undercarriage options and maintainability.
The 650L delivers 74 net hp (55 kW) through a Tier III-certified, four-cylinder, 4.5-L turbocharged Case Family IVengine with electronic fuel injection for maximum fuel effi-
ciency and easier starts in cold weather. A high-pressurecommon-rail injection system delivers enhanced combus-tion. A charge air cooler reduces emissions and provides aclean and efficient fuel burn, according to the manufacturer.
Sized to Fit the ApplicationA lower operating height allows the 650L to work around
low overhangs, while its lighter weight is ideal for work insoft soil conditions. The shorter track means easier turning,making the machine maneuverable on the job site. The com-pact size also makes the crawler dozer easy to transport fromjob to job.
“Case also offers a 90-inch blade for more precise work inconfined job conditions,” said Ion Warner, senior director ofmarketing. “This allows for operation between buildingswith narrow lot lines.”
Hydrostatic Drive Delivers Maximum ControlThe isolation-mounted dual path hydrostatic drive com-
ponents on the 650L deliver precise variable power turningand counter rotation for added maneuverability and per-formance. The adjustable operator settings allow the cus-tomer to set the steering, shuttle and maximum speed basedon personal preference or application.
“The Case system has dual hydrostatic pumps that deliv-er power to each track through large drive components,”Warner said. “This allows operators to push more materialthrough the turn, reducing the number of passes required tomove material.”
Easy Service Access and Increased ComfortThe seat on the 650L tilts easily for access to the hydro-
static system. The new design reduces the machine’s operat-
ing height by 5 in. (12.7 cm). Optional hydraulic test portsare now available on the 650L for fast diagnosis and easytroubleshooting.
The optional cab on the crawler dozer is isolation mount-ed from the main frame to cushion against noise and vibra-tion, increasing comfort and productivity. The mechanicalsuspension seat is standard, with an optional air suspensionseat. A high-capacity air conditioning system is standardwith cab units. The narrow dash and tapered hood allow
exceptional visibility to the blade, mak-ing it easy to gauge material flow underthe blade.
The low-effort, single-lever PAT bladecontrol increases productivity withsimultaneous, multifunction control. Theoperator can pitch the blade to match thematerial being worked.
Undercarriage DeliversPrecise, Easy Grading
The undercarriage features a double-reduction with planetary final drive forhigh tractive effort and long life. Thereare two track options available for the650L crawler dozer. The Case lubricatedtrack (CLT) is sealed and lubricated,with an oil reservoir in each pin. TheCase extended life track (CELT) uses a
large diameter hardened bushing, which provides outstand-ing durability and undercarriage life in abrasive soil condi-tions, according to the manufacturer.
The rigid undercarriage allows for precise track alignmentand easy grading. The 650L is available in long track (LT),wide track (WT), and low ground pressure (LGP) configu-rations to match operating condition. A 49-degree slopingtrack frame cover, along with ample space between the trackand the machine, helps shed material and makes undercar-riage cleaning easy.
MaintainabilitySwing-out access doors and sight gauges for ground line
maintenance and fluid level checks mean the operator will bespending less time servicing the machine and more time get-ting the job done. The front grill also swings out, along withan access door to the engine for easy servicing. Swing-upaccess doors reduce the time it takes to change the hydraulicsand hydrostatic transmission filters.
Operating weights on the 650L are 16,250 lb. (7,370 kg)on the LT, 16,800 lb. (7,619 kg) on the WT and 17,550 lb.(7,959 kg) on the LGP.
Complete Line of Crawler Dozers and Attachments
In addition to the 650L crawler dozer, Case offers twocrawler dozers less than 100 hp. These include the 84 net hp(62.6 kW) 750L and 96 net hp (72 kW) 850L. Case alsooffers three crawler dozers more than 100 hp.
A variety of attachments, such as winches, forestry guard-ing, laser blade control and rippers, is available for the Casecrawler dozer line.
For more information, visit www.casece.com.
With a lower operating height and weight, the new Case 650L crawlerdozer is ideal for residential job sites and confined commercial areas.
Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • December 12, 2009 • Page 65
Excavator Mounted DrillEliminates Hard Soil Delays
Mabey Bridge & Shore Inc.’s excavatormounted drill (EMD), manufactured in theUnited Kingdom by Dawson ConstructionPlant Ltd., is one of only a handful currentlyavailable along the East Coast.
The EMD’s auger, churning at nearly 160rpm, facilitates the installation of sheet pilingand other shoring equipment by looseningtough soils to permit excavation. Test runs inthe coquina of Northern Florida proved suc-cessful when the machine utilized all 15,000lb. ft. of torque to carve through the hardground and permit sheet pile installationswhere it otherwise would have taken days todig without it, according to the manufactur-er.
The EMD itself mounts to standard exca-vators and is powered by the hydraulic flowand return lines that would ordinarily supplythe excavator’s bucket. Augers of varyingsize attach quickly to the machine via a hexadapter and once fully powered, the EMD iscapable of drilling and loosening the most
cohesive soils — from clay to hardpan andmore.
The excavator mounted drill is availablenow from Mabey depots throughout the EastCoast.
For 20 years, Mabey Bridge & Shore Inc.has carried a broad range of products avail-able for bridges, excavation shoring, struc-tural shoring and temporary roadways.Mabey products are available for sale or rentworldwide, and its prefabricated bridges arefor temporary, permanent or emergency use.
The EMD’s auger, churning atnearly 160 rpm, facilitates theinstallation of sheet piling and
other shoring equipment byloosening tough soils to permit
excavation.
Nyrim Track Pads Stave OffSinking in Swampy, Sodden Soil
Over the last few years BLS has had anumber of applications for its Nyrim trackpads, developed for low ground pressureapplications. Last year Roy StromExcavating and Grading Company, ofChicago, Ill., purchased Nyrim tracks padsto dig underneath a skyscraper being built indowntown Chicago. Its machines were sink-ing into the Lake Michigan clay before ittried the Nyrim track pads. Strom purchasedmore Nyrim track pads this year for anothermachine that it plans to use. A couple yearsago Thornnton Equipment Services Inc.,Mokena, Ill., used Nyrim track pads on itsGradall excavator while dig-ging up old concrete pipe onwetlands. The steel tracks thatwere previously being usedwere causing the machine tosink into the soft ground.
This year Ahntech Inc., ofStompy Point, N.C., is using47.2 in. (120 cm) wide Nyrimtrack pads on its John Deere120C. Ahntech is cuttingditch banks in a very swampyarea using a mower head onthe end of the machine. Thetotal weight of the John Deere
machine with the mower head comes to28,850 lbs. (13,086 kg). The Nyrim pads are15 to 20 lbs. (6.8 to 9 kg) lighter than theoriginal 24 in. (61 cm) steel grouser shoesthat came standard on the machine, accord-ing to Ahntech’s Kevin Goudy. Using theNyrim track pads reduced the total weight ofthe machine between 1,500 and 2,000 lbs.(680 and 907 kg). This enabled Goudy towalk the machine over the swampy areaswithout having to worry about the machinesinking and getting stuck.
For more information, call 800/307-0299or visit www.TUFPADS.com.
AUTHORIZED OEM DEALER
811 Sivert Dr.Wood Dale, IL 60191
800-866-1778Fax: 630-595-3855
480 Blain StreetGary, IN 46406800-852-8816
Fax: 219-977-4220
HHiittaacchhiiEExxccaavvaattoorrss
HHiittaacchhii TTrruucckkssKKaawwaassaakkii
GGeehhllEEuucclliiddTTaallbbeerrttPPrrootteeccWWaallddoonnPPeerrkkiinnssHHeennsslleeyy
BBuuccyyrruuss BBllaaddeessCCuummmmiinnss
BBaallddwwiinn FFiilltteerrssEExxppaannddeerrSSyysstteemmss
AAlllliieedd//RRaammmmeerrEEssccooIIssuuzzuuHHiinnoo
SSeennnneebbooggeennMMooxxyy
YOUR PARTSSOURCE
Dresser(new & non-OEM)
Galion(new & non-OEM)
Wabco
Michigan
Samsung
IHCat (non-OEM)
RemanufacturedComponents
...plus many others
Visit our website: www.howelltractor.com
2770 May RoadPeru, Ill 61354800-342-6072
Fax: 815-224-2538
Page 66 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 67
AERIAL LIFTS
Manlifts
All Makes & ModelsRental, Parts,
Service, Training
Modern EquipmentSales & Rental800/445-4381
AIR COMPRESSORS
Compressors
Ingersoll-RandNew & Used Parts
Modern EquipmentSales & Rental800/445-4381
ASPHALT EQUIPMENT
Asphalt Rollers
2005 Cat CB224E, 160 hours.....................................$29,9002004 Cat CB224E, 946 hours.....................................$19,9002002 CB334D, 962 hours...........................................Call2004 CB334E, 2954 hours.....................................$27,0002004 Cat CB534DXW, 832hours ...........................$75,0002005 Cat CS563E, 287 hours.....................................$75,0002005 Cat CS563E, 1332 hours.....................................$75,0002005 Cat CS563E, 1,778 hours.....................................$75,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
2002 MultiQuip T-26P, s/n2304, Yanmar engine, 6215#centrifugal force @ 2400 rpm.,1120 hours..................$12,995.
Call ErikStar Equipment
800-369-2215
Asphalt - Misc.
Extreme Service Rotary Wheel Cutter
Ship in 24 hours!
Parts for all competitive units
Call 218-863-6444Attachments Internationalwww.attachmentsintl.com
ATTACHMENTS
Hammers
2003 Cat H160............$55,0002004 Cat H160............$45,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
COMPACTION EQUIP.
Misc. Compaction Equip.
2001 CAT 836, 8923 hours.....................................$59,0002004 CAT 836G, 7159 hours...................................$355,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
CRANES
All Terrain Cranes
1981 P&H 15, s/n 51705, 15ton, 72’ reach, Detroit dieselengine.........................$29,000.
Star Equipment515-283-2215
CRAWLER TRACTORS
Crawler Tractor
NH Construction EquipmentNew & Used
Parts & Service
Modern EquipmentSales & Rental800-445-4381
2006 Cat D4GXL,1049 hours...................$69,0002004 Cat D6RXLII, 4551 hours.................$155,0002004 Cat D8RII, 3406 hours.................$369,3001998 Cat D8R, 16,600 hours..............$143,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
2004/2005 D5-G, 1140 hours,sweeps, screens, orginal paint,excellent condition......$58,000.1996 D-5C, 5000 hours, verygood condition............$35,000.
Call 906-774-1516
906-396-1550 cell
EXCAVATORS
Hydraulic Excavators
Yanmar VIO75, s/n 12764,heat, air, cab, 24’’ bucket, goodtrack, good condition, 383hours............................$57,500
405-348-4633
2007 Takeuchi TB1140, s/n51400893, 32,000 #, 18’ digdepth, cab, heat, A/C, quickattach, bucjet, 861 hours..............................................$97,500.
Call ErikStar Equipment
800-791-9318
NH Construction EquipmentNew & Used
Parts & Service
Modern EquipmentSales & Rental800-445-4381
2006 Cat 303.5CCR, 698 hours....................$39,9002003 Cat 325CL, 2,998 hours...............$108,3002003 Cat 325CL, 6,987 hours.................$75,0002005 Cat 330CL, 2,366 hours...............$199,0002006 Cat 345CL ME, 3,809 hours...............$299,0002003 Cat 345BL, 4,941 hours...............$199,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
Mini Excavators
2003 Takeuchi TB016, s/n11604817, 3500#, 7’10’’ digdepth, canopy, bucket, used,1293 hours.................$10,995.2000 Mustang ME6002, s/nAA01447G, 12,566#, 64 hpYanmar engine, cab, heat, aux.hyd., bucket, 3B6 system, 2516hours...........................$30,500.
Call ErikStar Equipment
800-791-9318
NH Construction EquipmentNew & Used
Parts & Service
Modern EquipmentSales & Rental800-445-4381
FORESTRY EQUIPMENT
Logging Equipment
1996 Caterpillar 320L strokedelimber, 31” pads, Baldersonattachment, good condition,7157 hours ...............$92,000
Five Star Equipment Inc.607/775-2006
FORKLIFTS
Industrial Forklifts
Gradall/LullSales, Service, Training
Modern EquipmentSales & Rental800/445-4381
Rough Terrain Forklifts
1997 Sky Trak 5028, s/n97939D2494, 5000# lift, 28’boom, 48’’ carriage, 3037hours...........................$17,500.1991 Gehl 883, s/n JG077242,8000# lift, 40’ boom, ROPS,carriage w/forks, 7400 hours.....................................$14,995.
Call ErikStar Equipment
800-791-9318
Track Loaders
Backhoe Loaders
2005 Cat 420D, 972 hours.....................................$49,0002006 Cat 420EIT, 773 hours.....................................$65,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
Skid Steer Loaders
EXTRAS FROM DEFENSE DEPT. ORDER
5000# Pallet Forks$700
Landscape Land Planes$1350
Rock Buckets - 66’’$2250
Pick Up at Las Vegas Warehouse
Call 218-863-6444
2003 Bobcat S185, s/n519036163, 56 hp Kubotaengine, 1850# cap., hand/footcontrols, 67’’ tooth bucket, 1370hours...........................$15,995.1996 Mustang 940E, s/n6499606, 40 hp, T-bar steer,single pin fast attach, bucket,2057 hours....................$8,495.
Call ErikStar Equipment
800-791-9318
2007 JCB 180T, canopy modelwith Servo Controls, GP bucket,set of forks/ frame 48’’. Picturesavailable, mint condition, 10hours......................$31,000.
Farm-Rite Inc.908/625-0697
Wheel Loaders
NH Construction EquipmentNew & Used
Parts & Service
Modern EquipmentSales & Rental800-445-4381
2006 Cat 904B, 3,456 hours.....................................$39,0002005 928GZ, 2519 hours.....................................$87,3002006 Cat 938GII, 2,552 hours...................................$119,0002006 Cat 938GII, 441 hours...................................$129,0002006 Cat 972H, 3,180 hours...................................$229,0002003 Cat 980G, 7251 hours...................................$199,0002002 Cat 980G..................Call1998 Cat 980.............$499,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
Track Loaders
2006 Cat 953C, 721 hours...................................$135,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
2005 Takeuchi TL150, s/n21502357, 97hp, cab, heat,A/C, Case controls, smoothbucket, 944 hours.......$39,995.
Call ErikStar Equipment
800-791-9318
MISCELLANEOUS
Misc
NEW PARTSHyundai - Mustang
Okada - SakaiYanmar
Call:John Stevensor Jeff Brooks
G & H Services, Inc.973/383-3370
Fax: 373/383-5756
Service
We Service What We Sell!Warranty, Maintenance
and More!
Heavy Equipment, LightEquipment, Hand Tools &
Gas Detectors
Norris Sales Company610/279-5777
PARTS
Undercarriages
NEW UNDERCARRIAGEPARTS
Caterpillar D3, D3B, D3C,D4C, 931...6.125 Pitch
6S8800MT Link Assy., (2), 36section, dry, master pin, 9/16’’bolt........................$849.00 Ea.6S605MT Link Assy., (4), 36section, dry, split master, 9/16’’bolt........................$874.00 Ea.6S9066MT Link Assy., (4), 36section, SALT, split master,9/16’’ bolt ...........$1,099.00 Ea.6Y1339MT Link Assy., (4), 36section, SALT, split master,9/16’’ bolt ...........$1,105.00 Ea.3T6705MT Link Assy., (2), 37section, SALT, split master,9/16’’ bolt............$1,150.00 Ea.
Komatsu D30A, D31A, D31B,D37E, D31S, D31P...
6.0126 Pitch
TR1103211292 Track Pad,(118), 14’’ single grouser, 14mmbolt............................$7.39. Ea.TR1113000260 Top Roller (2),complete w/shaft....$82.00. Ea.TR1113000281 Bottom Roller(9), double flange.......................................$103.00. Ea.
G & H Services, Inc.973/383-3370
973/390-7394 CellFax: 373/383-5756
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on our online searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200CLASSIFIEDS
Page 68 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95
Did this ad catch your attention? Color can work for you.
Call Construction Equipment Guide800/523-2200
2007 Mustang ME3003 - Mini Excavator, withlong arm and 16" bucket, 36 HP, 112 Hrs, Fullwarranty .................................................$24,700
Top Notch Equipment 612/290-0640 24-25 PK
2006 Mustang 2041, 236 Hrs, 67.5" bucket, 43HP Yanmar, 1350# lift............................$12,900
Top Notch Equipment 612/290-0640 24-25 PK
2009 IROCK Crusher RDS-15 Closed CircuitCrushing and Screening Plant.
For more information call Sean Donaghy at 330/931-9595
24-25EB
SSEEEE YYOOUURR BBAARRGGAAIINNAADD IINN COLOR.
OONNLLYY $$5500 EEXXTTRRAA FFOORR TTWWOO IINNSSEERRTTIIOONNSS
The 2009 EZ Screen 1200XL, with a 5'x6' screen box,and a patented non-hydraulic screen drive. The EZ1200XL works with a 1/2 to 2 yard loader. Now with a20 Horsepower Deutz Diesel Engine.......$39,500 plusfreight
Other Screens Availablewww.ez-screen.com • 866/745-5828 24-25 EB
2003 John Deere 320 Skid, Cab, Heat, qt, 72"bucket, 1365 Hrs, 66 HP, s/n T00320A101325....................................................................$18,500
763/444-8873 24-25 PK
2002 John Deere 250 Open Station, 1810Hrs, weight kit, KV0250A351153 ...........$12,500
763/444-8873 24-25 PK
Deere 332 Skid Steer, Steel tracks, 2 speed, SSLcab, 2" seat belt, standard foot controls, cab w/wiper,floor plate, A/C & Heater, rear weight bracket w/8weights, suspension seat kit, horn, 84" tooth bucket,Hyd option: Standard, Tire size: 14L-17.5 - Updated,764 hrs ............................................................$34,500
Please Contact Eric Bischoff at 740/225-0566 24-25 EB
Next IssueCloses
December 18th
22000077 CCaassee 11885500KK,, s/n N7HC51103, 744 Hrs, Cabw/Heat & A/C, 13'6" 6-Way Blade, 30" Pads, ColdStart (48 Mo/4000 Full Machine Warranty until7/15/11)........................................................$$117700,,000000
Call Mark at (630) 878-8767 25-26 JM
22000066 CCaassee 11885500KK,, s/n HHA431139, 704 Hrs, Cabw/Heat & A/C, 13'6" 6-Way Blade, 30" Pads, ColdStart (48 Mo/4000 Full Machine Warranty).$$118800,,000000
Call Mark at (630) 878-8767 25-26 JM
22000077 CCaassee 11115500KK,, s/n N7DC00076, 786 Hrs, Cabw/Heat & A/C, 132" Dozer Blade, 30" Pads, Cold Start(4000 Full Machine Warranty) .......................$$9988,,000000
Call Mark at (630) 878-8767 25-26 JM
11998888 GGrroovvee AAPP 330088,, 8 Ton Carry Deck, 24' Plus 10' gasengine, new rotec, fresh paint .............................$$2222,,550000
CCaallll AAnnddyy aatt ((221166)) 331166--11551111 24-25 EB
22000066 MMaanniittoowwoocc 1122000000 CCrraawwlleerr CCrraannee,, 120 Ton,180'/40', upper boom point, block, ball. Self erectionpackage, aux drum prepped, free fall on main and reardrum, A/C, Serviced and ready to work!...........$$669955,,000000
CCaallll AAnnddyy aatt ((221166)) 331166--11551111 24-25 EB
HHeerree''ss hhooww tthhee BBAARRGGAAIINN AADDSS WWoorrkk::• Supply us with a photo of a machine (Only one machineper Bargain Ad) and a maximum 17 word description plus
contact and phone number.
• Send Check for $95 with copy to: Construction Equipment Guide, 470 Maryland Drive, Ft
Washington, PA 19034.
• The ad will run for two consecutive issues.
For more information, call Construction Equipment Guide
today at
800/523-2200
Rosco SPRHH Chip Spreader, 693 Hours,Very Clean, Ready to go to work, 14' Head,FOB Windom, MN..................................$42,500
Dick Courts • 507-678-2752 24-25 PK
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 69
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95
HHeerree''ss hhooww tthhee BBAARRGGAAIINN AADDSS WWoorrkk::
Your Ad Will Be Seen By Over 26,371 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at
800/523-2200
• Supply us with a photo of a machine (Only one machine per Bargain Ad) and a maximum17 word description plus contact and phone number.
• Send Check for $95 with copy to: Construction Equipment Guide 470 Maryland Drive • Fort Washington, PA 19034
• The ad will run for two consecutive issues.
1997 JCB 411B, S/N 527497, with 4179 Hrs,equipped w/AC, 3rd Function and Forks $40,000CCaallll 550022//445566--44005500 AAsskk ffoorr MMeelliissssaa oorr AAllbbeerrtt 24-25 EB
22000033 IIssuuzzuu NNPPRR,, 4 cyl turbo diesel 175hp, 41k, very economicmotor, 4 spd auto, flat bed w/ 4 tool boxes down the side and1 main rear tool box that has a lot of storage space and is ableto hold cutting torches. Also has built in fuel tank. 4 new tires.Very nice truck and runs very well......................AAsskkiinngg $$99,,550000
EEpphhrraattaahh SSaaffeettyy SSyysstteemmss •• 551188//999933--2277000023-24 KH
11998866 IInnttll DDiiggggeerr TTrruucckk ww// TTeelleelleecctt DDiiggggeerr DDeerriicckk,, diesel, autotrans, 43' corner mount fiberglass hyd. extension, 112,000miles on it, good condition, runs great! Great for digging holesfor ple barns, fences, setting roof trusses for barns, housesand garages, setting poles for electric servies for new homeconstruction .........................................................AAsskkiinngg $$66,,990000
EEpphhrraattaahh SSaaffeettyy SSyysstteemmss •• 551188//999933--2277000023-24 KH
11999900 BBuucckkeett CChheevvyy AAsspplluunnddhh mmooddeell LL3388TTMM ssiinnggllee mmaannbbuucckkeett,, 5 spd w/ a 2 spd rear, 100,000 miles, good condition,brand new batteries, never been stored outside, great operat-ing condition. Great for repairing or painting barns & houses,trimming trees, and decorating trees and houses at Christmas................................................................................AAsskkiinngg $$55,,990000
EEpphhrraattaahh SSaaffeettyy SSyysstteemmss •• 551188//999933--2277000023-24 KH
11999977 KKoobbeellccoo SSKK115500 MMaarrkk IIVV wwiitthh bbrraanndd nneeww ffaaccttoorryyCCuummmmiinnss EEnnggiinnee,, only 200 hours on new engine and 5300 onwhole machine, weight 35,000 lbs., new thumb attachmentand new Wain Roy coupler, new 48" hydraulic bucket, excellentoperating condition and excellent appearance. Very NiceMachine!.................................................................................CCaallll
EEpphhrraattaahh SSaaffeettyy SSyysstteemmss •• 551188//999933--2277000023-24 KH
1994 Dresser 510C, 80 HP, 1.75 yd Bucket,cab, new tires...............................................POR
Diesel Machinery1-800/456-4005 Ask for Don or Herb 24-25 PK
RECYCLING EQUIPMENT
Misc Recycling
Powerscreen Commander510, 5x10, turbo shredder,good condi-tion.....................$75,000.Bivitec 5x16, perfect for finescreening, excellent condition,236 hours..................$105,000.Powerscreen Mark 3, 8x4,Ford engine, good condition....................................$39,000.
Call614-309-6854
RENTALS
Rental
www.norrissales.com
Daily - Weekly - MonthlyCompetitive Rates
Mixers, Generators, ArrowBorads, Compaction,Excavators, Loaders!
Now in PA & NJ
Norris Sales Company800/547-RENT (7368)
610/279-5777
Construction & Equpment &Supplies for the“Professionals”
Daily - Weekly - Monthly &Long Term Rentals Available
Stone, Wacker, Honda, Gehl,JLG to name a few .....
Norris Sales Company610/279-5777
Construction & IndustrialEquipment Rentals
Compaction, Excavating,High Lifts, Traffic Control,
Safety, Loaders,Landscaping
Norris Sales Company610/279-5777
Construction Equipment Rentals
Modern EquipmentSales & Rental800/445-4381
SCRAPERS
Motor Scrapers
1998 Cat 627F, 9,740 hours....................................$299,000
1998 Cat 627F, 10,307 hours...................................$299,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
TRAINING
Operator Training
Are your operators compliantwith Federal Standards,
OSHA, ANSI, ISO?
MODERN GROUPoffers training for:- Front-end Loaders &Backhoes- Aerial work platforms (AWP)(Boom & Scissor Lifts)- Rough Terrain Forklifts(Gradall, Lull, JCB)- Skid Steer Loaders
For information, pricing orreservations:
Call 1-800-223-3827www.moderngroup.com
All prices include Trainer, traveland material
NO HIDDEN COSTS
TRENCHER
Trenchers
Ditch Witch HT25 BackhoeTrencher Combo, s/n1V0555U, backhoe - 12’’,trencher - 6’’ dirt & rock chain, 4’boom, fair condition...................................$14,500.
405-348-4633
TRUCKS
Misc Trucks
2001 Cat 730, 9,126 hours..................................$115,0002004 Cat 735, 4,035 hours..................................$249,0002005 Cat 735, 3,738 hours..................................$269,0002006 Cat 740, 3,320 hours..................................$305,0001994 Cat D350D, 20,412 hours ..........................$49,000
Ransome CATCall Tom Rosser215-245-2749 or
Joe Villa215-245-3729
SSuubbssccrriibbee ttooCCEEGG ttooddaayy......
GGeett aann eeddggee oonn yyoouurr ccoommppeettiittiioonn!!Construction Equipment Guide Midwest Edition subscribers are the bestinformed about construction news, construction equipment, sales, auctions,equipment prices, trends and changes in the industry and activities of its people.Call Toll Free! We now accept Visa, Mastercard & American Express!
SUBSCRIPTIONS:
470 Maryland Dr. • Ft. Washington, PA 19034Email: [email protected]
TOLL FREE 1-800/523-2200FAX 215/885-2910
®
CARDMEMBER’S NAME _________________________________________________________
COMPANY NAME _______________________________________________________________
STREET____________________________________ PHONE NO. ________________________
CITY ______________________________________STATE _______ ZIP ________________
TYPE OF BUSINESS _____________________________________________________________
Check Enclosed VISA MASTERCARD American Express
CARD NUMBER
EXP. DATE(Mo./Yr.)
SIGNATURE OF AUTHORIZED CARDHOLDER
One Year $65(within United States & Puerto Rico Only)
Page 70 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
D6RLGP 2007 CONTRACTORContact: JEAN MAURICE BOUTINPhone: 1 450 346 8975Email: [email protected]––––––––––––––––––––––––––––––––EXCAVATORCATERPILLAR 325CL/DL, YEARS 2005 -7, UP TO 5,000 HOURS, PREFERABLYPIPED FOR HAMMERContact: RONPhone: 0097235403077Email: [email protected]––––––––––––––––––––––––––––––––1 YARD ROUNDNOSE CLAMBUCKETContact: GILPhone: 239 434 0249Fax: 239 434 6849Email: [email protected]––––––––––––––––––––––––––––––––D20X22 SERIES IIVERMEER HORIZONTAL DIRECTIONALDRILLContact: 20082009Phone: 320-493-7168Email: [email protected]––––––––––––––––––––––––––––––––ATLAS COPCO XAS75 COMPRESSORPARTSContact: TIM LEWANDOWSKIPhone: 724-887-4899Email: [email protected]––––––––––––––––––––––––––––––––QUIKTACH ADAPTER TO FIT 1845UNILOADERContact: JEFF HUBBARDPhone: 316-640-0322Email: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR 14H MOTORGRADERWE HAVE A NEW POTENTIALCUSTOMER FOR AN EARLY YEARMODEL 14H MOTORGRADER. WHOLE-SALE PRICE MUST REFLECT CURRENTMARKET CONDITIONS.Contact: WENDELL CAINPhone: 770-381-8984Fax: 770-381-6977Email: [email protected]––––––––––––––––––––––––––––––––1984 OR NEWER CAT D7GContact: RANDY REECEPhone: 770-966-9056Fax: 770-966-9035Email:[email protected]––––––––––––––––––––––––––––––––BULLDOZER D7G ONLY CONTRACTORContact: JEAN MAURICE BOUTINPhone: 1 450 346 8975Email: [email protected]––––––––––––––––––––––––––––––––BARBER GREEN BG210B PAVERI AM LOOKING FOR BG210B PAVERContact: TONY THOMASPhone: 818-956-5231Fax: 818-956-5239Email: [email protected]––––––––––––––––––––––––––––––––HM 4500Contact: NASEEM KAUKABPhone: 00966 503114628Fax: 00966 1 477 3075Email: [email protected]––––––––––––––––––––––––––––––––
DUMP TRUCKContact: LARRY WEINSTEINPhone: 845 721-2983Fax: 845 357-221Email: [email protected]––––––––––––––––––––––––––––––––2 CAT 938F WHEEL LOADERSContact: RICHARDPhone: 603 828-6100Fax: 603 430-2119Email: [email protected]––––––––––––––––––––––––––––––––I AM LOOKING TO BUY D6NLGPContact: JEAN MAURICE BOUTINPhone: 1 450 346 8975Email: [email protected]––––––––––––––––––––––––––––––––VOLVO 360 EXCAVATOR 2004-2006, ANY LOCATION OKContact: JOHN TANNOURJIPhone: 914-693-0300Email: [email protected]––––––––––––––––––––––––––––––––DEMOLITION BUCKET FOR A CAT 977LREASONABLY PRICEDContact: RICKPhone: 860-428-1059Email: [email protected]––––––––––––––––––––––––––––––––CAT WHEEL LOADER 910EFG, 920, 930,936EContact: ALHARTHIPhone: 00447875086827Email: [email protected]––––––––––––––––––––––––––––––––DYNAPACSCA251D,CA252D,CA262D,CA302,CA301Contact: WAQAR AHMEDPhone: 92-0333-2376638Email: [email protected]––––––––––––––––––––––––––––––––KOMATSU MOTORGRADERSGD525A,GD605A,GD625APLEASE OFFER US & KINDLY SEND USDETAILS, PHOTOS & BEST PRICE.Contact: NAQIB KHANPhone: +92-333-3298751Email: [email protected]––––––––––––––––––––––––––––––––CRAWLER CRANEAMERICAN 9310 CRAWLER CRANEContact: JOHN NEVINSEmail: [email protected]––––––––––––––––––––––––––––––––KUBOTA CHAIN ON FORKS TO BUCKETTHESE ARE FORKS THAT SLIP ON THEBUCKET AND ARE HELD ON WITH ACHAIN AND BINDERContact: BILL VAN PAMELEmail: [email protected]––––––––––––––––––––––––––––––––LOOKING TO BUY OLDER CAT WHEELLOADERS | IN MODELS 910, 920, 930,950, 950B, 950E, 966D/E/F.Contact: ATHER A. SIDDIQUIPhone: +92-333-2240692Email: [email protected]––––––––––––––––––––––––––––––––325 OR 330 BL OR CL325 9R 330 MUST HAVE 3306 ENGINE,36" TRACT, JACK HAMMER AND 70 TO80% U/CContact: SAMPhone: 940-655-8462Email: [email protected]––––––––––––––––––––––––––––––––
KUBOTA REAR HYDRAULIC OUTLETSI WANT TO CONNECT UP TO 4 QD FORREAR ATTACHMENTS ON MY KUBOTA3750 TRACTOR. I HAVE EXISTING 3-POINT & MY TRACTOR HAS EXISTINGLEVER SLOTS FOR CONTROL. USED ISOK.Contact: TERRYPhone: 206-241-0630Email: [email protected]––––––––––––––––––––––––––––––––CAT DEMOLITION BUCKET USEDContact: RICKPhone: 860-428-0159Email: [email protected]––––––––––––––––––––––––––––––––JOHN DEERE OR HITACHI 160C LCContact: DAVE CAPODICEPhone: 309-275-1927Fax: 309-828-1960Email: [email protected]––––––––––––––––––––––––––––––––LOADERS, GRADERS, EXCAVATORSLOOKING FOR EQUIPMENT TO PUR-CHASE. WE CAN ALSO HELP YOULOCATE EQUIPMENT YOU’RE LOOKINGFOR.Contact: RHONDA SCHEERPhone: 610-544-3399Email: [email protected]––––––––––––––––––––––––––––––––ANY TYPE OF STEELI BUY ANY TYPE OF NEW, USED ORSURPLUS STEEL INCLUDING SHEETPILING, H-PILING, PIPE PILING, WIDEFLANGE BEAMS, PLATES, PIPE, TUBINGETC...Contact: MICHAEL KAYEPhone: 609-882-6983 x 104Fax: 609-882-7458Email: [email protected]––––––––––––––––––––––––––––––––CASE/DAVIS TRENCHER TF900/TF1000DEAD OR ALIVEContact: STEVEN H. MILLERPhone: (260) 341-2140Fax: (260) 724-4165Email: [email protected]––––––––––––––––––––––––––––––––OHIO SCRAP MAGNETContact: MARK VIAPhone: 540-745-3405Fax: 866-905-5488Email: [email protected]––––––––––––––––––––––––––––––––CAT 345B TRACKS/PADSContact: BILL KUKURINEmail: [email protected]––––––––––––––––––––––––––––––––BOBCAT 323 COMPACT EXCAVATORI AM LOOKING FOR A COMPACT EXCA-VATOR SIMILAR TO THE 323.Contact: JASONEmail: [email protected]––––––––––––––––––––––––––––––––I AM LOOKING TO BUY CONTRACTORD6KLGPContact: JEAN MAURICE BOUTINPhone: 450-346-8975Email: [email protected]––––––––––––––––––––––––––––––––
VIBRO HAMMERContact: MIKE DONNESPhone: +61427775849Fax: +61892932261Email: [email protected]––––––––––––––––––––––––––––––––FINAL DRIVEContact: ROBERTO J PALACIOSPhone: 786-287-7056Fax: 305-573-7038Email: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR D11R CRAWLER TRAC-TORSWE NEED ONE POSSIBLY TWO 8ZR OR9TR SERIES PARTS OR CORE REBUILDMACHINES. SU AND SINGLE SHANKPREFERRED. ANY LOCATION WORLDWIDE. IF YOU HAVE A MACHINE MATCH-ING OUR NEEDS PLEASE SENDDETAILS, PHOTOS AND PRICE.Contact: CHARLES SOLOMONEPhone: 719-689-2434Email: [email protected]––––––––––––––––––––––––––––––––CAT D11T | CAT D11T. NEW UP TO 4000HOURS.Contact: PAUL CROLLAPhone: +47-22.207696Email: [email protected]––––––––––––––––––––––––––––––––Wrecked or burnt Morbark Model 13wood chipper for parts.Contact: NormaPhone: 724-887-9375Fax: 724-887-4899Email: [email protected]––––––––––––––––––––––––––––––––VOLVO L120B OR L120C - (1) VOLVOL120B OR L120C, ANY YEAR, ANY CON-DITIONContact: IVAN OCAMPOEmail: [email protected]––––––––––––––––––––––––––––––––KOMATSU D85A21 - 4 X KOMATSUD85A-21. NEW UPTO 3000 HOURS.Contact: PAUL CROLLAPhone: +47-22.207696Email: [email protected]––––––––––––––––––––––––––––––––KUBOTA L39 OR NEW HOLLAND TC40 -WOULD LIKE EITHER A KUBOTA L39OR A NEW HOLLAND TC40AContact: GERRY PAOLINEmail: [email protected]––––––––––––––––––––––––––––––––FRONT LOADER FOR A KUBOTA L5450Contact: CHARLIE LOVEALLPhone: 412-445-1878Email: [email protected]––––––––––––––––––––––––––––––––FELCO ROLLER BUCKETContact: DONALD BEARDPhone: 828-324-6774Fax: 828-324-9632Email: [email protected]––––––––––––––––––––––––––––––––RAYGO RUSTLER 404 PARTS MACHINEContact: WARREN CARDPhone: 423-332-2223Fax: 423-332-9444Email: [email protected]––––––––––––––––––––––––––––––––
CRANE BOOM & BASE FOR BUCYRUSERIE 30B SUPERContact: VINCENT NERIPhone: 860-664-8042Fax: 860-664-9175Email: [email protected]––––––––––––––––––––––––––––––––JD 595D,495 - LOOKING TO BUY JOHNDEERE 595 WHEELED EXCAVATOR OR495 JD ANY YEARContact: IMTIAZPhone: 647-887-4786Fax: 905-497-8633Email: [email protected]––––––––––––––––––––––––––––––––LATE MODEL SOMERO POWER RAKE -NO RETAIL DEALS PLEASE.Contact: TOM NACEYPhone: 651-214-1694Email: [email protected]––––––––––––––––––––––––––––––––BADGER 460Contact: COREYEmail: [email protected]––––––––––––––––––––––––––––––––NEED NOW FROM CONTRACTOR ONLY4 BULLDOZERS 375A 3Contact: JEAN MAURTICE BOUTINPhone: 1 450 346 8975Email: [email protected]––––––––––––––––––––––––––––––––CAT 330DLContact: RANDY REECEPhone: 770-966-9056Fax: 770-966-9035Email:[email protected]––––––––––––––––––––––––––––––––330BL CAT EXCAVATORContact: ROD MARTIN OR PETERCORCHPhone: 717-733-3593Fax: 717-733-8531Email: [email protected]––––––––––––––––––––––––––––––––VIBRATORY ROLLERS • WANTED 05 ORNEWER 66-84 IN ROLLERS 1000 HRSOR LESSContact: JIMEmail: [email protected]––––––––––––––––––––––––––––––––CAT 140H - CAT 140H GRADER, 17.5X25TYRES, BELOW 3500 HOURS, RIPPERContact: PAUL CROLLAPhone: 47-22.207696Fax: 44-161.226-8525Email: [email protected]––––––––––––––––––––––––––––––––JOHN DEERE WHEELED EXCAVA-TOR595 - JOHN DEERE WHEELEDEXCAVATOR 495,595Contact: IMTIAZPhone: 647-887-4786Fax: 9054978633Email: [email protected]––––––––––––––––––––––––––––––––I AM LOOKING TO BUY 650J NEW LGPContact: JEAN MAURICE BOUTINPhone: 1 450 346 8975Email: [email protected]––––––––––––––––––––––––––––––––CAT D8H STARTER - 46A22000 SERIESDIRECT ELECTRIC STARTER.Contact: JOHN NEVINSEmail: [email protected]––––––––––––––––––––––––––––––––
2004 CAT BACKHOE 426BContact: DOUG LAUGHLINPhone: 607-742-9017Fax: 607-795-4157Email: [email protected]––––––––––––––––––––––––––––––––BALL JOINT FOR INGERSOLL RANDVR636 - LOOKING FOR USED BALLJOINT FOR INGERSOLL RAND VR636ALL TERRAIN FORK LIFT. PART#59210572.Contact: JOSH KAMMEYERPhone: 269-685-9525Fax: 269-685-5888Email: [email protected]––––––––––––––––––––––––––––––––BRIDGE DECK FINISHERContact: BRIAN SKAJEMPhone: 909 772 1749Fax: 951 352 4301Email: [email protected]––––––––––––––––––––––––––––––––NEED PARTS FOR JCB BACKHOE3C1400B - NEED LOADER CONTROLALSO NEED18.4-24 TIRESContact: KLAUS MUELLERPhone: 239-980-2000Fax: 239-418-1000Email: [email protected]––––––––––––––––––––––––––––––––AUSTIN WESTERN BLADE PACER 300DEAD OR ALIVEContact: LYLE CARPENTERPhone: 701-549-3727Email: [email protected]––––––––––––––––––––––––––––––––REAR RIPPER FOR CAT D5NXLContact: WENDELL CAINPhone: 770-381-8984Fax: 770-381-6977Email: [email protected]––––––––––––––––––––––––––––––––GRADALL 660E CRAWLER | GRADALL660E CRAWLER WITH 5.9 CUMMINSContact: SCOTT RUBRIGHTPhone: 724-468-4700Fax: 724-468-4975Email: [email protected]––––––––––––––––––––––––––––––––KOMATSU D355Contact: RANDY REECEPhone: 770-966-9056Fax: 770-966-9035Email:[email protected]––––––––––––––––––––––––––––––––1976-1979 CAT 12GContact: RANDY REECEPhone: 770-966-9056Fax: 770-966-9035Email:[email protected]––––––––––––––––––––––––––––––––CATERPILLAR CRAWLER DOZERContact: GREG HENDRIXPhone: 936-327-5430Fax: 936-327-5108Email: [email protected]––––––––––––––––––––––––––––––––LOADER CAT 970FII,966FII,966DVERY GOOD CONDITIONContact: MANSOUR HASEBPhone: +202 26632820Fax: +202 26632820Email: [email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website
for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 71
Page 72 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Wednesday, December 16, 2009 • 8 am EDT (local time)Repocast.com
601 Gordon Industrial Ct. Byron Center MI 49315 & 1290 M-15 Ortonville MI 48462
Bank Repossessed Liquidation of all remaining assets from Key Construction and Phoenix Steel Erectorsselling on an Absolute auction with NO MINIMUMS OR RESERVES! Selling all Assets Including: Many
Trucks, tandem, tri axle and quad axle dump trucks, wheel loaders, skid steers, rollers, plate compactors,air compressors, pavers, trailers, asphalt recycler, office equipment, many assorted hand tools and supportequipment, Grove Crane, JCB extend-a-boom lift, JCB load all lift, crane trucks, enclosed trailers, man lifts
and much more! All items will sell as is to the high bid on the auction!
Key Construction and Phoenix Steel Erectors Complete Liquidation
Tuesday, December 15, 20098 am EDT (local time)
Repocast.com 601 Gordon Industrial Ct. Byron Center MI 49315
American Leasing Complete Liquidation,Approx. 34 semi/van trailers selling on anabsolute auction with NO MINIMUMS ORRESERVES. All items will sell to the high
bidders on the auction.
American Leasing Complete Liquidation
Case Offers Six Months of No-Payments, No-Interest
Case Construction Equipment announceda “buy now, pay later” promotion that offerscustomers up to six months’ delay on pay-ments and interest for new equipment pur-chased before Dec. 31, 2009.
“The six-month no-payment offer willhelp our customers put new Case equipmentto work today and delay payment as late asnext summer — which will enable currentcash flow utilization for other areas of theirbusiness. It’s also a great program for cus-tomers who want to take advantage of taxdepreciation programs by year end,” said IonWarner, senior director of marketing.
The company noted that new equipmentpurchases made by Dec. 31, 2009, may qual-
ify for a one-time 50-percent tax deprecia-tion bonus through the American Recoveryand Reinvestment Act of 2009. To calculatean equipment owner’s potential tax savings,visit www.casece.com/calculator.
The year-end promotion also extends freetwo-year, 2,000-hour powertrain protectionto purchases of Case skid steers and compacttrack loaders.
Additionally, customers can enjoy threemonths of no payments and no interest onpurchases of Case attachments, parts andservice. They also may receive a free $250rebate card when buying new attachments.
For more information, visitwww.casece.com.
What’s going on in your company?We want to know!
Give us a call.Construction Equipment Guide
800/523-2200 or FAX 215/885-2910
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 73
The Complete Auction And Appraisal Service
ALEX LY N & SONSALES MANAGERS & AUCTIONEERS, INC.
Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com
THURSDAY, DECEMBER 17 @ 9:30 AMSAUGET (ST. LOUIS), ILLINOIS
DIRECTIONS: From Lambert – St. Louis International Airport: I-70 E via ramptoward St. Louis for 14.3 miles, take exit onto I-55 N/ I-64 E/ I-70 E/ US-40 E toward I-55 N/ I-64/ US-40/ Illinois and continue to follow I-64 E for 7.3 miles. Take exit onto I-255 S/ US-50 W toward Memphis for 4.9 miles, then take exit 15 for Mousette Lane.Keep right at fork, follow signs for St. Louis Downtown Airport and merge ontoMousette Lane. Turn left at Goose Lake Road for approx. 1/2 mile – site will be on right.Address: *Exit 15 off I-255. ACTUAL SITE IS VACANT NEXT TO 2041 GooseLake Road, Sauget, IL 62206.
NOTE: Selling in this sale will be late model rental fleet equipment from both RSC andJLG Industries.
HILITES INCLUDE: ARTICULATED HAUL TRUCKS: 2004 Case 330, 16HYDRAULIC EXCAVATORS: Cat EL240, 2005 JD 330CLC, Kobelco SK290LC,2003 Case 9060B, 2004 Bobcat 334, 2004-(4) 2003 Bobcat 331, Bobcat 331, Bobcat328, (2) 2005 Bobcat 328, 2005 Bobcat 323, Yanmar B27, MOTOR GRADERS: 2005PSI MG622, PULL PANS: Reynolds 17 yard, PULL BEHIND DUMP BODIES: Terex23566, 2 RUBBER TIRED LOADERS: Case W20B, Allis Chalmers 645B,CRAWLER TRACTORS: Case 850G, CRAWLER LOADERS: 2005 Cat 963C, JD450B, 3 TRACTOR LOADER BACKHOES: 2007-2006 Case 580 Super M-II (4x4),JD 410E, SOIL COMPACTORS: Raygo RAM, BOOM TRUCKS: 1994 VolvoF230SE (t/a), 5 TELESCOPIC FORKLIFTS: 1998 Gradall 534C-42, (3) Gradall534C-36, 1999 Skytrak 8042, RUBBER TRACKED SKID STEERS: 2004 BobcatT250, 9 SKID STEERS: 2000 Cat 236, 2004 Bobcat S250, 2004 Bobcat S220, 2004Bobcat S185, Bobcat S185, 2004 Bobcat S175, (2) Bobcat S175, Bobcat S150, 2005Bobcat 553, 2 GENERATORS: (2) New Atlas Copco QAX24, 2 LOADER LAND-SCAPE TRACTORS: (2) 2006 Case 570MXT (4x4), 2 UTILITY TRACTORS: JD1650, IH 574, 22 SCISSOR LIFTS: (3) JLG 2646E2, (2) 1999 JLG 2032E2, (10) JLG2032E, (7) JLG 1932E2, 3 BOOM LIFTS: 2002 Genie S45, Genie S40 (4X4), GenieS40 (4X4), 5 TRUCK TRACTORS: (2) 1997-(2) 1995 GMC Aero (s/a), 1995 WhiteGMC Aero (s/a), RECREATIONAL/ UTILITY VEHICLES: Hot Wheels Go Karts,ATTACHMENTS: Backhoes: Stanley Hammers., Skid Steers: Pallet Forks, HaySpears,Buckets, Thumbs, Fork Frames, SUPPORT EQUIPMENT: Chainsaws, ChopSaws, Porta Powers, Bottle Jacks, Floor Jacks, Battery Chargers, Winches, Sockets,Levels, Hose reels, Shovels, Post Hole Diggers, Tri Balls, Rakes, Weedeaters, DrillPress, Sandblasters, Grinders, Jack Hammers, Heaters, Trailer Jacks, Jack Stands,Ramps, Hoists, Welders, Pressure Washers: (4) 2009 Easy Kleen Magnum 4000.
* There will be an additional 30-40 machines consigned from Hertz Rentals. Due totime constraints, there will be new machines arriving daily. We are 99% sure they willbe on site. Please call ahead to verify availability.
SITE PHONE: (262) 903-6269
CONSTRUCTIONRENTAL FLEET
EQUIPMENT AUCTION
Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve. Visit us on the Internet at www.lyonauction.com
Page 74 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON AUCTIONEERSBridgeport, NYPhone: 315-633-2944
• Syracuse, NYTues., December 15,2009For: Late Model Crane,Boom Trucks, Aerial Lifts& Large Quantity ofRigging Equipment
• San Bernardino, CAFri., December 16, 2009For: Large Rental ReturnAuction of Late ModelConstruction Equipment,Aerial Lifts, Forklifts,Trucks & Trailers
• St. Louis, MOThurs., December 17,2009For: Rental FleetEquipment – Large andSmall, Trucks & Trailers
• Atlantic City, NJSat./Sun., December 19-20, 2009For: Late Rental ReturnAuction of Late ModelConstruction, Aerials,Forklifts, Trucks, Trailers& Support Equipment
• Greenwich (Albany), NYWed., December 30,2009For: Late Model Kobelco,New Holland, Cat, JohnDeere EarthmovingEquipment, Forklifts,Aerial, SupportEquipment
• Middletown (Florida),NYSat., January 9, 2010For: Late ModelConstruction Equipment,Aerial Lifts & SupportEquipment
• Binghamton NYFri., January 15, 2010For: Complete Liquidationof Truck Tractors,Construction andSupport Equipment
• Scranton, PASat., January 16, 2010For: Late Model TruckWreckers, Truck Tractors,Van Trailers & Containers
• Leon, MexicoThurs., January 21,2010For: Late ModelConstruction Equipment,Aerial Lifts & SupportEquipment
• Columbus (Delaware),OHSat., January 23, 2010For: Late Model RentalReturn Auction plusSupport Equipment
• Kissimmee, FLSunday thru Saturday., February 1-8, 2010For: Annual 8 Day Sale ofthe Latest & GreatestConstruction, Aerials,Forklifts, Cranes, TruckTractors, Dump Trucksand All Types of Trailersand Support Equipment –THE REAL SALE!
• Indianapolis, INFri., March 5, 2010For: Late ModelConstruction Rental FleetEquipment
• Newark, NJDATE TBAFor: Rental FleetConstruction Equipment,Aerial Lifts, Trucks &Trailers
RITCHIE BROS. AUCTIONEERSRichmond, BC, CanadaPhone: 402-421-2631
• Farmington, NMDecember 14• Dubai, United ArabEmiratesDecember 14 - 16
•Pittsburgh, PADecember 14
• Nashville, TNDecember 15
• Minneapolis, MNDecember 15
•Kansas City, MODecember 16
• Northeast, MDDecember 16 & 17
• Los Angeles, CADecember 17 & 18
• Prince George, BC, CANDecember 17
• St. Louis, MO
December 18
• Narita, JapanJanuary 27, 2010
• Panama City, PanamaFebruary 2, 2010
• Hyderbad, IndiaFebruary 3, 2010
• Las Vegas, NVFebruary 5, 2010
• Orlando, FL
February 15-20, 2010
• Torreon, MexicoFebruary 10, 2010
• Orlando, FLFebruary 15-20, 2010
• Brisbane, QLD,AustraliaMarch 16, 2010
• Geelong, VIC, AustraliaMarch 18, 2010
• Salt Lake City, UTMarch 19, 2010
• Geelong, VIC, AustraliaMarch 18, 2010
• Regina, SK, CANMarch 30, 2010
GLOBAL FORCE AUCTION GROUPThurmont, MDPhone: 301-631-0650
• Martinsburg, WVSat., December 19,2009For: ConstructionEquipment
G.W. MCGREW AUC-TION CO., INC.Seven Valleys, PAPhone: 888-311-2811
• Seven Valleys, PAMon., December 14,2009For: Selling ConstructionEquipment for LocalContractors
IRAY AUCTIONSFoley, MNPhone: 320-968-7230
• Foley, MNFri., March 5, 2010
• Portage, WIFri., April 16, 2010
• Foley, MNFri., June 4, 2010
• Portage, WIFri., July 16, 2010
• Foley, MNFri., September 17,2010
• Portage, WIFri., October 15, 2010
• Foley, MNFri., December 3, 2010
IRON PLANET AUC-TIONSPleasanton, CAPhone: 888-433-5426ONLINE AUCTIONSGo towww.ironplanet.com toview the complete auc-tion schedules, inspec-tion reports and to placeyour bid!
• Thurs., December 16-17, 2009For: ConstructionEquipment
• Wed. & Thurs., January 7, 2010For: ConstructionEquipment
MANHEIM AUCTIONSLakeland, FLPhone: 863-607-5440
• Lakeland, FLFri., February 19, 2010For: Late ModelConstruction Equipment,Trucks & Trailers
MIEDEMA AUCTIONEERING &APPRAISALS INC.Byron Center, MIPhone: 616-538-0367
• Byron Center, MITues., December 15,2009For: Complete Liquidationof American Leasing sell-ing semi/van trailers
• Byron Center, MIWed., December 16,2009For: Complete Liquidation– ConstructionEquipment, Trucks,Trailers & SupportEquipment
MEEKINS AUCTIONCOMPANYLumberton, NCPhone: 800-499-6560
• Lumberton, NCTues.., December 29,2009For: 15th AnnualDecember ContractorsAuction
PETROWSKY AUCTIONEERS INC.North Franklin, CTPhone: 860-642-4200
• North Franklin, CTFri. & Sat., January 29-30, 2010 For: Over 100 Units!Truck Tractors, Dumps,Van & Utility Body Trucks& More!
PURPLE WAVE AUCTIONSDerby, KSPhone: 866-608-9283OONNLLIINNEE OONNLLYY -- BBIIDDDDIINNGGEENNDDSS::Thurs., Dec. 17 – 10 AMFor: ConstructionEquipment
OONNLLIINNEE OONNLLYY -- BBIIDDDDIINNGGEENNDDSS::Thurs., Dec. 17 – 10 AMFor: RSC EquipmentRentalwww.purplewave.com
RITCHASON
AUCTIONEERS
Lebanon, TN
Phone: 800-806-3395
• Lebanon, TN
Sat., December 12,
2009
For: TBA
STEFFES AUCTIONEERS
Fargo, ND
Phone: 701-237-9173
• Litchfield, MN
Wed, December 30,
2009
For: AgIron 21
Consignment Event
www.steffesauctioneers.c
om
THE AUCTIONEERS
GROUP
Neptune, NJ
Phone: 732-776-7222
• Edison, NJ
Tues., December 15,
2009
For: Construction and
Landscaping Equipment
from Silagy Landscaping,
Inc.
UTILITY AUCTIONS
Des Moines, IA
Phone: 515-299-6289
• Wilmington, DE
Fri., December 18, 2009
For: Construction, Utility
& Forestry Equipment
YODER & FREY
AUCTIONEERS, INC.
Holland, OH
Phone: 419-865-3990
• Kissimmee, FL
Feb 8 –Feb. 16, 2010
36th Annual Kissimmee,
FL Auction
AuctionsComing
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 75
(1 of 3) Champion720A VHP Series V
(4) Broderson IC803FCarry Deck Cranes
Large Qty ofFleet Vehicles
(1 of 2) 2005 Trail KingTK110HDG-523 (55 Ton)
Mack DMM69065S (AWD)6,000 Gallon Water Trk
2004 Deere 644H
1998 Ford (Quint Axle)Aluminum Dump
(1 of 3) 2004Cat D5G LGP
2006 Rhodes (26’) SteelEnd Dump Trailer
2005 Volvo G720B(Rear Ripper)
(14) Shoring-Gravel Boxes2004 Case 1150H WT with
Trimble Grade Control
Call Us Today for FREE BROCHURE!800.499.6560
ONLINE BIDDINGAVAILABLE
TUESDAY, DECEMBER 29TH, 2009 • 8:00 AMLUMBERTON, NORTH CAROLINA
Permanent All-Weather (Drive Thru) Auction Facility
AAuuccttiioonneeeerr NNoottee:: Major Year-End Auction consisting of equipment and trucks from well-known regional contractors that have decided to liquidate someof their surplus assets. Major Absolute Packages of construction, transportation, agricultural, and support equipment will be available on this auction.Over 300 items of equipment already listed and we are currently adding trucks and equipment daily.. BBee tthhee nneexxtt ccoonnttrraaccttoorr ttoo ccaallll!!
Preview Complete Auction Inventory with Pictures and Descriptionsat our company website: wwwwww..mmeeeekkiinnssaauuccttiioonn..ccoomm
AUCTIONAUCTION15th Annual December Contractors
Page 76 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Cat Auction Services hosted a sale Dec. 1 in KansasCity, Mo. Dean Machinery, the Caterpillar dealer forKansas City, hosted the sale at its facility.
Joel Morrel (L) of Cat Auction Services scans the crowdfor more bids while auctioneer Kent Peterson keepsthe action going.
Lori Dean, president of Dean Machinery Co., and MarcDowdell, vice president of sales, Dean Machinery Co.,welcome bidders to the sale.
Kyle Mayfield (L) of Dean Machinery helps celebratehis grandfather Hiram Jones’s 80th birthday by bring-ing him to the auction.
Checking over this Cat CP-433B is Pete Walter of PeteWalter Construction in Maryville, Mo.
Charlie Baer (L), corporate used equipment managerof Ziegler Cat, meets with Rick Albin, Cat AuctionServices president and CEO.
Jim Kidwell (L), owner of Jim Kidwell Construction,discusses the auction with Jeff Fisher, used equipmentmanager of Dean Machinery Co.
This Cat IT28G caught the attention of Chris and DianaChristensen of Christensen Excavating.
Bob Driver of Driver Sewer & Water stands in front ofthe Cat 250E articulated truck.
Looking over the undercarriage of this Cat 330L exca-vator is Curt Wakley of Wakley Trenching.
Kansas City…
Dean MachineryHosts Cat AuctionServices Sale in Mo.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 77
Auctions you can trustAuction Company Bond #70259785. Preliminary list to date. Equipment subject to change.
Go to www.ironplanet.com to view the complete auction schedule, guaranteed inspection reports, and place your bids.
Online Auction. www.ironplanet.com
Thursday, January 7
37 Asphalt/Paving/Concrete
321 Attachments & Parts
194 Forklifs
112 On-Road Trailers
18 Scrapers
40 Tools
31 Water Related Equipment
And many more….
DOZERS EXCAVATORS
BACKHOES
FARM EQUIPMENT
COMPACTORSAERIAL WORK PLATFORMS
GRADERS LOADERS
237 108 153
83 195 163
20 106 202
252TRUCKS –ON-ROAD
SKID-STEERS
Page 78 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CALL FOR A FREE BROCHURE
800.211.3983For information on upcoming auctions, visit our
web site at rbauction.com
FARMINGTON, NM, USA 505.327.6800 DEC 14PITTSBURGH, PA, USA 724.947.7240 * DEC 14DUBAI, UNITED ARAB EMIRATES +971.4.8120600 DEC 14 - 16NASHVILLE, TN, USA 615.453.4549 DEC 15MINNEAPOLIS, MN, USA 507.774.5050 DEC 15KANSAS CITY, MO, USA 816.633.4096 DEC 16NORTH EAST, MD, USA 410.287.4330 DEC 16 & 17LOS ANGELES, CA, USA 951.940.9441 * DEC 17 & 18PRINCE GEORGE, BC, CAN 250.963.8491 DEC 17ST LOUIS, MO, USA 636.931.0090 DEC 18NARITA, JAPAN +61.7.3382.4444 JAN 27
PANAMA CITY, PANAMA +507.2662511 FEB 2PHOENIX, AZ, USA 602.269.5631 FEB 2 & 3HYDERBAD, INDIA +91.11.41414444 FEB 3LAS VEGAS, NV, USA 702.644.2468 FEB 5TORREON, MEXICO +52.871.731.7371 FEB 10ORLANDO, FL, USA 863.420.9919 FEB 15 - 20BRISBANE, QLD, AUSTRALIA +61.7.3382.4444 MAR 16GEELONG, VIC, AUSTRALIA +61.3.5245.3333 MAR 18SALT LAKE CITY, UT, USA 435.843.4260 MAR 19HARTFORD, CT, USA 860.684.1055 MAR 24REGINA, SK, CAN 306.933.9333 MAR 30
Can't make it to the auction? Place your bids over the Internet at rbauction.com. Submit proxy bids in advance of any auction, or place real-time bids through our live auction broadcasts. Click rbauctionBid on the Ritchie Bros. web site for details.
*NOTE NEW DATE - Dates are subject to change
Auction UpdateEVERYTHING SELLS TO THE HIGHEST BIDDER
Upcoming UnreservedPublic Auctions22
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2009 • Page 79
ADVERTISER INDEX
TThhee AAddvveerrttiisseerrss IInnddeexx iiss pprriinntteedd aass aa ffrreeee eeddiittoorriiaall sseerrvviiccee ttoo oouurr aaddvveerrttiisseerrss aanndd rreeaaddeerrsshhiipp.. CCoonnssttrruuccttiioonn EEqquuiippmmeenntt GGuuiiddee iiss nnoott rreessppoonnssiibbllee ffoorr eerrrroorrss oorr oommiissssiioonnss..
A E D .............................................................................................27AEM WORLD OF ASPHALT .........................................................16ALEX LYON & SON INC
ST LOUIS MO.........................................................................73ALEX PARIS CONTRACTING CO INC ..........................................9ALL ERECTION & CRANE RENTALS..........................................26ALLU GROUP ...............................................................................29AMERICAN STATE EQUIPMENT .................................................11BARGAINS...............................................................................68,69BOBCAT ENTERPRISES..............................................................27BODINE MFG................................................................................62BRANDEIS ....................................................................................26BUDROVICH INC..........................................................................31CASE CORP .................................................................................44CEG SCALE MODELS..................................................................30CLASSIFIEDS ..........................................................................67,69CONSTRUCTION EQUIPMENT GUIDE
MIDWEST CONSTRUCTION EXPO......................................32FLORIDA AUCTION 2010 PROMO........................................71CONSTRUCTIONEQUIPMENTGUIDE.COM.........................66CHICAGO CONSTRUCTION EXPO ......................................55CEG WANTED........................................................................70CEG MERRY CHRISTMAS ....................................................39
DIERZEN TRAILERS CO..............................................................38DOOSAN PORTABLE POWER ....................................................47DURATECH...................................................................................60DYNAPAC .....................................................................................52EAGER BEAVER TRAILERS........................................................17EQUIPMENT CORP OF AMERICA ..............................................26FABCO EQUIPMENT INC...............................................................7FARM-RITE EQUIPMENT INC .....................................................13FCC EQUIPMENT FINANCIAL.....................................................10FELLING TRAILERS.....................................................................36FINKBINER EQUIPMENT CO.......................................................11GARY CARLSON EQUIPMENT ...................................................15GEITH INC ....................................................................................20HALL INDUSTRIAL COMPANY ....................................................59HARTS TRACTOR & EQUIPMENT CO........................................41HH FABRICATION ........................................................................18HOWELL TRACTOR & EQUIPMENT CO................................65,80HULLS 151 IMPLEMENT INC ......................................................21ILLINOIS TRUCK & EQUIPMENT ..................................................3IROCK CRUSHERS......................................................................62IRON PLANET
ONLINE AUCTION..................................................................77
JOHN DEERE ...............................................................................49KAWASAKI CONSTRUCTION MACHINERY ...............................53KOMATSU AMERICA CORP ........................................................50KUBOTA........................................................................................54LARSON IMPLEMENT..................................................................29LIEBHERR.....................................................................................19LLOYD MEEKINS & SONS AUCTION
LUMBERTON NC ...................................................................75LUBY EQUIPMENT SERVICES....................................................21MCCANN INDUSTRIES INC......................................................6,31MID COUNTRY MACHINERY.......................................................40MIDLAND EQUIPMENT CO .........................................................38MIEDEMA AUCTIONEERING INC
BYRON CENTER MI ..............................................................72MUSTANG MFG............................................................................43P.J. DOOLING ...............................................................................24PALADIN HEAVY CONSTRUCTION ............................................48PATTEN TRACTOR & EQUIPMENT CO ........................................2POWERSCREEN MW DEALER...................................................61PURPLE WAVE INC
INTERNET AUCTION .............................................................73RDO EQUIPMENT/SCHARBER EQUIPMENT.............................23REMU SCREENING TECHNOLOGY ...........................................60RITCHIE BROS. AUCTIONEERS
AUCTION UPDATE ................................................................78ROAD BUILDERS MACHINERY .............................................18,29ROAD MACHINERY & SUPPLIES CO...........................................8ROCKLAND MFG CO...................................................................25ROCKSTER NORTH AMERICA ...................................................62ROLAND MACHINERY INC............................................................5RUDD EQUIPMENT CO ...............................................................25SANDVIK MINING & CONSTRUCTION .......................................63SCHAEFER ENTERPRISES ........................................................65STAR EQUIPMENT LTD ...............................................................31SUBURBAN CHEVROLET ...........................................................35TOWMASTER INC.......................................................................37WORLDWIDE EQUIPMENT LLC..................................................38
OHIO STATE SUPPLEMENTBOBCAT ENTERPRISES................................................................3GIBSON MACHINERY LLC ............................................................5JD EQUIPMENT INC ......................................................................3NORTRAX-MIDWEST.....................................................................8THE MCLEAN CO...........................................................................7
Page 80 • December 12, 2009 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE