MISCELLANEOUS TOOLSThe Urrea tools in this chapter complement a workshop or industry. The design and quality of these tools offer a high level of functionality, durability, and ease of use.
The product lines in this section are divided into:
• Measuringtools - Tape measures • Cuttingtools - Utility knives - Hacksaws and hacksaw blades • Cleaningtools - Wire brushes • Measuringandtracingtools - Calipers - Precision squares - Magnetic bases - One innovation in our tape measures is the use of ball bearings. The tape is also extra wide,
making them easier to use, are more professional and easier to read. They comply with NOM standards, which guarantee their accuracy and durability.
- The Urrea utility knife line includes a wide variety of types, such as straight, curved, and safety utility knives. There are also the snap blade utility knives, with a mechanism for automatically changing blades.
- A variety of light duty hack saws are presented in this section. You will find high tension ergonomic, fixed and adjustable hack saws.
Complementing the hacksaws are bimetal hacksaw blades: flexible to avoid breakage that are at the same time resistant to high tension.
- Wire brushes are useful for cleaning off things like solder, rust, and casting remains. The stainless steel wire brushes are ideal when you want to avoid contaminating the workplace with bits of wire.
- The calipers, squares, and magnetic bases are useful tools for tracing and measuring. The calipers offered can take inner and outer measurements. The precision square, as its name indicates, is ideal for aligning and verifying parts either in a metrology lab or in a workshop. The magnetic base pairs are ideal for aligning round materials when measuring, rectifying or machining parts.
- The URREA heavy-duty LED flashlights produce particularly bright lighting. Their neoprene-coated aluminum body is impact-resistant and weatherproof. The batteries are good for over 15 hours of continual usage thanks to their low energy requirements. 4 different types are available (4, 9, 12, and 20 LED’s). They are covered by a 1-year warranty (excluding batteries).
The information presented in this chapter is organized al follows:
•Technicalstandards. •Detailedproductspecifications. •Safetyrecommendations.
TAPE MEASURES HACKSAWS
CALIPERS
TILE CUTTER STEEL FISH TAPE
UTILITY KNIVES WIREBRUSHES
PRECISIONSQUARES
LEDFLASHLIGHTS
PORTABLEWORKSTATION
690
692
694
696
689
692
693
695
697 697
688
NOM-046-SCFI-1999 “Steel and regular measuring tapes”GGG-K-494C “Knives, general purpose shop, detachable blade”NMX-0-130-1985 “Hacksaws”NMX-0-083-1990 “Hacksaw blades”
A-A-2078A “Brushes, platers, hand”GGG-C-95A “Calipers, general purpose”A-A-51150B “V-blocks and clamps”
TECHNICAL STANDARDS URREA manufactures its tools according to technical product standards.
A technical product standard is a document that outlines basic design and manufacturing
processes in order to assure that a product performs adequately in the conditions required by end users. These standards are issued by private or governmental organizations or associations.
The only organization to issues international standards is ISO (International Organization for Standardization), which issues the ISO 9000 series, regarding quality systems. ISO also issues technical product standards. In the United
States, many associations issue or used to issue standards, such as GSA/US FEDERAL. In Europe, there is DIN (Deutsches Institut für Normung e.V.), the German Institute for Normalization, which joins different organizations and commissions that are dedicated to promoting standardization and quality of products commercialized in Germany.
TECHNICAL STANDARDS THAT APPLY TO MISCELLANEOUS TOOLS
LEADERSHIPINDISPUTABLE QUALITY
The quality of URREA tools exceeds
international manufacturing
standards (ISO, ANSI, ASME, SAE,
GSA, DIN, DGN, EMA, ANCE, VDE).
When buying a URREA tool you are
purchasing from the best tools in
the world.
www.urreaprofessionaltools.com
(800) 366-6911
TOOLSM
ISCELLANEOUS
689SUPERIOR QUALITY AFFORDABLE TOOLS
18
MISCELLANEOUS TOOLS
STAINLESS STEEL TAPE MEASURES
Tempered chrome clip for more durability.
TAPE WIDTHLENGTH
lb.0.4290.6170.9921.091
mm19252525
ft.10162632
gm195280450495
in.0.71.01.01.0
m35810
STANDARD: NOM-046-SCFI-1999
CODE
1583LS1585LS1588LS1589LS
STAINLESSSTEELTAPEMEASURES
Nylon covered tape: More resistance to abrasion and rust.
Double side print on the tape: Allows to watch in both faces of the tape the measures.
CALIPERSWIRE BRUSHESUTILITY KNIVESSTEEL FISH TAPETILE CUTTERHACKSAWSPRECISIONSQUARES
LEDFLASHLIGHTS
TAPE MEASURES
1589LS
Double hook magnet, two rivets for maximum stregth and durability.
Automatic lock.Allows the tape stops where user requires when pushes out and releases it. The tape does not rewind automatically until user pushes the break release.
Inox stainless steel box with co-molded neoprene.Maximum comfort, grip and durability.
690
STANDARD: NMX-0-130-1985
CODE
353AT354P
gm750600
lb.1.651.32
in.1212
in.1616
AlluminumPlastic
BLADEBODY
mm304.8304.8
mm406.4406.4
LENGTH
HACKSAWS
HACKSAWS
353AT
354P
• 2 cutting angles 45O and 90O for added flexibility of cutting needs.• Ligthweigth and ergonomical design.• Blade length: 12”.
• 2 cutting angles 45O and 90O for added flexibility of cutting needs.• Ligthweigth and ergonomical design.• Blade length: 12”.
1 piece alluminum body construction.
Front tumbgrip for better control.
Front tumbgrip for better control.
Ergonomical designed contoured handle.
I-beam frame construction.
High resistance plastic body.
45O and 90O cutting angles.
Turn to change blade.
45O and 90O cutting angles.
High tension knob for easy adjustment.
High tension hacksaw frame
slipslipslipHandleHandle
slipslipslipHandleHandle
WIRE BRUSHESPRECISIONSQUARESCALIPERS
LEDFLASHLIGHTS
MISCELLANEOUS TOOLS
UTILITY KNIVESTILE CUTTER STEEL FISH TAPETAPE MEASURESHACKSAWS
TOOLSM
ISCELLANEOUS
691SUPERIOR QUALITY AFFORDABLE TOOLS
18
Manufactured with 8% cobalt.
Bimetal blade for wood or metal.
Flexible composition prevents breakage during use.
STANDARD: NMX-0-130-1985
CODE
353F354F352
gm600
1350840
lb.1.322.981.85
in.1212
8, 10& 12
in.15 1/2
1615 1/2
High tensionFixed
Adjustable
BLADETYPE
mm304.8304.8
203,254& 304.8
mm393.7406.4393.7
LENGTH
HACKSAWS
STANDARD: NMX-0-083-1990
CODE
HB1218BHB1224B
1824
in.1212
TEETH PER INCH
mm304.8304.8
LENGTH
BIMETALBLADES
HACKSAWS
BIMETALBLADES
354F
• Fixed linear tension hacksaw.
• Made of solid steel. The increased weight facilitates cuts and is less tiring.
• Butterfly screws to adjust the blade.
• Blade length: 12” (304.8 mm).
352
• Linear tension adjustable hacksaw.
• Light design.• Moving bridge adjusts
to three different cutting positions.
• Butterfly screws to adjust the blade.
• Cutting positions: 8”, 10” and 12” (203.2, 254 and 304.8 mm).
353F
• Fixed, high tension hacksaw.
• Made of aluminum.• Strong and light design.• Blade length: 12”.
WIRE BRUSHESPRECISIONSQUARESCALIPERS
LEDFLASHLIGHTS
MISCELLANEOUS TOOLS
UTILITY KNIVESTILE CUTTER STEEL FISH TAPETAPE MEASURESHACKSAWS
692
HEAVY DUTY PROFESSIONAL TILE CUTTERSoft grip handle for confort grip.
I-beam high leverage grip handle for better power transmittance.
Cutting guide scaled in inches and metric.
Heavy duty die casting alluminum base.
Winder reel made of high impact plastic for durability and smooth operation.
Extra large grip designed tobe gripped from diferent angles, even with a gloved hand.
SAE 1045 steel tape 1/16”x1/8”.
Reel turns easily in either direction for one handed operation.
Poliurethane padded bed for cutting stability.
Ball bearing slides for smooth scoring.
MAXIMUM CUT
MAXIMUM LENGTH
lb.3.097.7214.77
cm627290
m153060
gm1,4003,5006,700
in24 5/32
28 11/3235 7/16
ft4896192
STANDARD: FEDERAL GGG-W-651 TIPO II
CODE
CODE
TC62TC72TC90
GJ15GJ30GJ60
HEAVYDUTYPROFESSIONALTILECUTTER
STEELFISHTAPE
• Tungsten carbide cutting wheel.
STEEL FISH TAPE
WIRE BRUSHESPRECISIONSQUARESCALIPERS
LEDFLASHLIGHTS
MISCELLANEOUS TOOLS
UTILITY KNIVESSTEEL FISH TAPETAPE MEASURES HACKSAWSTILE CUTTER
TOOLSM
ISCELLANEOUS
693SUPERIOR QUALITY AFFORDABLE TOOLS
18
UTILITY KNIVES
AUTOMATICBLADE(SAFETY)
689AR
LENGTH WIDTH THICKNESS
in.6 3/4
in.1 1/2
in.3/4
gm185
mm171.4
mm38.1
mm19.0
lb.0.40
STANDARD: GGG-K-494C
STEPUTILITYKNIFE
689
LENGTH WIDTH THICKNESS
in.6 3/4
in.1 1/2
in.3/4
gm185
mm171.4
mm38.1
mm19.0
lb.0.40
STANDARD: GGG-K-494C
CURVEDRETRACTABLEBLADE
690
LENGTH WIDTH THICKNESS
in.7 1/2
in.1 5/8
in.1
gm290
mm190.5
mm41.9
mm25.4
lb.0.63
STANDARD: GGG-K-494C
SNAP-OFFBLADEAUTOMATICCHANGE
691
LENGTH WIDTH THICKNESS
in.6 1/2
in.1 10/16
in.13/16
gm235
mm165.1
mm41.2
mm20.3
lb.0.51
STANDARD: GGG-K-494C
3 positions for cutting.
A mechanism for automatically retracting the blade helps avoid
accidents.
Ergonomic curved design.Antislip grip.
Cartridge holds 10 replacement 22 mm wide blades.
Automatic blade change.Blade lock.
689
690
691689AR
All our utility knives store replacement
blades inside.
Button to open the inner cartridge and change the blade.
3 cutting positions.
Automatic retracting
mechanism helps avoid accidents.
Comes with a built-in blade dispenser.
1.- Slide the blade all the way forward.
3.- Slide the holder back until a new blade clicks in.
2.- Remove the blade.
WIRE BRUSHESPRECISIONSQUARESCALIPERS
LEDFLASHLIGHTS
MISCELLANEOUS TOOLS
TILE CUTTER STEEL FISH TAPETAPE MEASURES HACKSAWS UTILITY KNIVES
694
WIRE BRUSHES
• Urrea wire brushes are 3 times more durable than conventional wire brushes.
• Urrea wire brushes are the best option for cleaning solder, rust, castings, paint, burrs, amonst other things.
CODE
1885CSS1885CR
in.15/1615/16
in.5 1/165 1/16
in.1 1/81 1/8
in.10 5/810 5/8
4 x 164 x 16
gm161199
WIDTH(A)
LENGTH(B)
HEIGHT(C)
TOTAL WIDTH(D)
NUMBER OF ROWS
mm23.8123.81
mm129129
mm28.528.5
mm270270
lb.0.3550.439
STANDARD: A-A-2078A
WIREBRUSHES
Stainless steel wire brushes, made of the proper hardness to minimize contamination of the workplace. 1885CSS
Ergonomic plastic handle is easy to hold, reducing fatigue.
Carbon steel wire brushes are just the right stiffnessto speed up your work.
1885CR
PRECISIONSQUARESCALIPERS
LEDFLASHLIGHTS
MISCELLANEOUS TOOLS
UTILITY KNIVESTILE CUTTER STEEL FISH TAPEWIRE BRUSHES
TAPE MEASURES HACKSAWS
TOOLSM
ISCELLANEOUS
695SUPERIOR QUALITY AFFORDABLE TOOLS
18
CODE
80016IN80018IN800110IN800112IN80016EX80018EX800110EX800112EX80016DV80018DV800110DV800112DV
gm120180200240120180220260120180200260
lb.0.2640.3960.4400.5290.2640.3960.4850.5730.2640.3960.4400.573
in.68
101268
101268
1012
InternalInternalInternalInternalExternalExternalExternalExternalDividerDividerDividerDivider
SIZEUSAGE
mm152.4203.2254.0304.8152.4203.2254.0304.8152.4203.2254.0304.8
CALIPERS
STANDARD: GGG-C-95A
CALIPERS
80018EXFor external use
80018INFor internal use
80018DVDivider caliper fortransferring and
comparing distances
Knurled knob enables one-handed 360° turning.
Fine thread screw for greater precision.
Spring keeps the caliper closed.
Knurled lock saves time.
Machined ends.
Heat treated edges decrease wear.
Made of high grade steel.
Ideal for marking inked projects.
Adjusting nut is smooth and precise.
Ideal design for precision work, precise readings, and other measurements.
WIRE BRUSHESPRECISIONSQUARES
LEDFLASHLIGHTS
MISCELLANEOUS TOOLS
UTILITY KNIVESTILE CUTTER STEEL FISH TAPECALIPERS
TAPE MEASURES HACKSAWS
696
PRECISION SQUARES
X
Y 916404
The square is precisely parallel and straight.The square’s inner and outer
angles are exact.
Manufactured with SAE5160 steel, of 40-50 HRc hardness.
The length of the square is measured from the inner face to the edge.
Ideal for aligning and verifying parts when working with dimensional measurements.
Conventionally machined in a press.
Working areas are heat treated to decrease wear.
CODE
916402916403916404916405916406
in.468
1012
in.3456
7 15/32
in.0.00190.00280.00280.00280.0038
gm16034052013801620
SIZE(X)
SIZE(Y)
PERPENDICULARITY OF THEWORKING FACES
mm101.6152.4203.2254.0304.8
mm75
100125165
209.5
µm4872727296
lb.0.350.741.143.043.57
STANDARD: BS939 GRADE B
PRECISIONSQUARES
Tolerancesinµm 916402 916403 916405916404 916406
Parallelism of the rulerStraightness of the rulerFlatness of the endSquareParallelism of the endParallelism of the lateral faces of the end
88616525
88616550
12128
248
50
1288
208
50
12128
248
50
WIRE BRUSHES CALIPERSLED
FLASHLIGHTS
MISCELLANEOUS TOOLS
UTILITY KNIVESTILE CUTTER STEEL FISH TAPEPRECISIONSQUARES
TAPE MEASURES HACKSAWS
TOOLSM
ISCELLANEOUS
697SUPERIOR QUALITY AFFORDABLE TOOLS
18BT900
Clamp for regular wokpieces.
Extendible press which could hold extra wide (95 cm) workpieces.
All steel construction for added durability and jobsite ruggedness.
Progressive jaw advancement; its foot-pedal operated clamp/unlock, secures workpiece in place.
Rubber jaw facings, securely grip workpiece without marring delicate materials.
LED FLASHLIGHTS
PORTABLE WORKSTATION
Low power consumption.
CODE
7L2A7L3A7L2C7L2D
49
1220
11203048
AAAAA
CD
2 x 1.5V3 x 1.5V2 x 1.5V2 x 1.5V
gm152156208386
No. OFLED’s
LUMENS BATTERYTYPE
BATTERYSPECS
lb.0.330.340.460.85
HEAVYDUTYLEDFLASHLIGHTS
7L2A(4 LEDs)
90m throw
295’ throw
7L3A(9 LEDs)
7L2C(12 LEDs)
7L2D(20 LEDs)
Neoprene covered aluminum body.
WIRE BRUSHESPRECISIONSQUARESCALIPERS
MISCELLANEOUS TOOLS
UTILITY KNIVESTILE CUTTER STEEL FISH TAPELED
FLASHLIGHTSTAPE MEASURES HACKSAWS
Extremely bright beam.
PORTABLEWORKSTATION
BT900
CLAMPING RANGE
MAXIMUMCLAMPING FORCE
CLAMPINGJAW SIZE
MAX LOAD
in0-37 7/16”
Kg150
lb.330
gm20.9
mm205 x 80 x 7.5
N10,000
mm0-950
lb.46