Multilink’s Installation & Construction Catalog2
Multilink’s Installation & Construction Catalog 3
PATENTS & INNOVATIONS2007
First Web Video Installation Training For Fusion Splicing TrainingFirst Web Video Installation Instruction Training For Power Supply
FTTx Fiber Optic Slack Storage EnclosureFTTx Overlay Molding For Existing Molding
FTTx Exterior Fiber Optic Slack Storage Enclosure2005
Drop Fiber Sno-Shoe - Pat# D450,042SMulitpath Pavement Duct System
5 Amp Min. Stand By Power SupplyDirect Core CoolingOpen Face Molding
2004Compression Seal Technology Dome Enclosure
Tech Bag For Handling Converters2002
Communication Cable Clip - Pat# 6,378,814 B12001
Battery Power Supply Source Of Uninterruptible Power Supply - Pat# 6,268,665 B12000
Release Of 1st Airflow Power Supply Cabinet - Pat# 6,932443 B11999
Patented The 1st UPS With Polarity Of Inverters CCP Tech - Pat# 5,994,7931998
Fiber Optic Splice Case - Pat# 5,732,1801997
First Cable Identification Tag - Pat# 387,8111993
Patented And Trademarked First Plastic Sno-Shoe - Pat# 5,408,571Architectural Cove Molding For Housing Cable Wires - Pat# D332,941
1992Patented First Low Cost Torque Wrench - Pat# 5,152,200
1991Patented Coring And Stripping Tool For Dielectric Cable - Pat# 5,023,995
Multilink’s Installation & Construction Catalog4
TABLE OF CONTENTS
Patents & Innovations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3SECTION 1: MDU Enclosures/Installation MDU Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MDU Tools/Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 SECTION 2: Cable Markers Cable Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 SECTION 3: Image Building Products Digital Converter Totes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 SECTION 4: Maintenance Tools Prep Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 SECTION 5: Plastic Demarcation Enclosures Plastic Demarcation Enclosures . . . . . . . . . . . . . . . . . . . . . . . . 39 SECTION 6: Security Seals & Drop Installation Hardware Security Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Drop Installation Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Splice Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 SECTION 7: Plastic & Steel Installation Products Point-of-Purchase Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Multichannel Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Wave Cove Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Latch Duct Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Plastic Raceway Fittings & Accessories . . . . . . . . . . . . . . . . . 78 Steel Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 SECTION 8: Plastic & Steel Installation Products For Fiber Optic Cable Steel Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Cove Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Square Latch Duct Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Square Plastic Molding Exterior Grade Molding . . . . . . . . 102 Overlay Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Single Fiber Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Accessories for Plastic Moldings . . . . . . . . . . . . . . . . . . . . . . . 106 Downspout Exterior Grade Molding . . . . . . . . . . . . . . . . . . . 108
Multilink’s Installation & Construction Catalog 5
We have the facility that can cater to all of our
customer’s special needs and requirements
Capable of quick,custom service,
for all yourmanufacturing
needs
Our fabricating and warehouse facilities can handle any size order no matter how big or small, including blanket orders and special releases
FULL SERVICE SHEET METAL FABRICATION
Multilink’s Installation & Construction Catalog6
News Release - 9/1/07
Stat Trak™ IP Accessible Lock System For MDU Enclosures, Pedestals And Remote Cabinets
Roll out #1 – MDU box electronic locking system. Multilink has been approached by system plant operators who are interested in controlling access to their MDU enclo-sures. The basic premise is to minimize cable theft and vandalism of the equipment inside of these enclosures. Addition-ally the system plant operators would like to monitor the status of the enclosure and log who enters these enclosures and when. The system plant operator prefers to be able to use existing employee ID badges for controlled entry into these enclosures.
How it Works: The basic system would be a keypad alarm with monitoring and data logging. This system would be comprised of an electronic keypad, enclosure door sensors, Stat Trak™ system, (note: the Stat Trak™ unit requires any standard Cable Modem to operate), a siren and/or buzzer and a power supply. The keypad would have an access door to shield it from harsh environmental conditions and to minimize being obvious of its presence.
System Option Description: Option 1: The basic system would be capable of having an electronic/mechanical locking device for added security. Option 2: The basic system would be capable of having a backup power system added for full functionality during power outages. This would require the additional components of a battery and a charging circuit. The amount of back up power time available would be dependent on the battery size.
Normal Operation: The system would work by responding to the opening of the keypad door. At that point a timer would start and a buzzer would sound until the correct access code is entered into the keypad. Upon entering the correct code into the keypad, the buzzer would stop and the Stat Trak™ system would send a message that the alarm has been deactivated by code number “xyz” along with a time stamp and location ID. After authorized access the system would automatically re-arm five minutes after the doors are closed or immediately after the correct access code is entered into the keypad.
Alarm Condition Operation: The system would work by responding to the opening of the keypad door. At that point a twenty second timer would start and a buzzer would sound for ninety seconds. The Stat Trak™ unit would send a minor alarm message after twenty seconds of the keypad door being open and no keypad entry, indicating a keypad door tamper alarm. If the incorrect keypad code is entered three times a keypad tamper alarm would be generated and all keypad entry activity would be ignored for the next ten minutes and the buzzer would sound for five minutes. If the main door of the enclosure is opened without deactivating the system via the keypad, an instant alarm would sound and a major alarm would be generated via the Stat Trak™ system. This major alarm condition could utilize a separate (louder) alarm siren or the same buzzer as the keypad. This major alarm condition would sound the siren or buzzer for ten minutes.
Powering Needs: 1) An active 2-way RF drop2) An authorized Cable Modem 3) An active AC power outlet, rated for fifteen amps at one hundred and twenty volts
For more details about Stat Trak™ IP accessible Lock Systems please email [email protected]
Multilink’s Installation & Construction Catalog 7
Round (Conduit) Knockouts
A 1-3/8” x 2-15/32”
B 7/8” x 1-1/8” x 1-3/4”
C 7/8” x 1-1/8” x 1-3/8” x 1-3/4”
D 1-3/8” x 1-31/32” x 2-15/32”
•
•
•
•
PVC Riser Guard Knockouts
1.624” x 2.125”
2.156” x 2.625”
2.656” x 3.125”
•
•
•
Trapezoid Knockouts
SR075
SR100
SR200
•
•
•
CONDUIT/KNOCKOUT MATCHING GUIDE
CONDUIT SIZE ACTUAL OD RECOMMENDED KNOCKOUT SIZE
1/2” 840 7/8”
3/4” 1.060 1-1/8”
1” 1.315 1-3/8”
1-1/4” 1.660 1-11/16”
1-1/2” 1.900 1-31/32”
2” 2.375 2-15/32”
2-1/2” 2.875 2-15/16”
3” 3.5 3-19/32”
Multilink’s Installation & Construction Catalog
SEC
TIO
N 1
MD
U E
NC
LOSU
RES
/ I
NST
ALL
ATI
ON
8
MDU ENCLOSURERS
BOX STYLE HINGE BOX SIZE NUMBEROF LOCKS
TYPEOF LOCK
KNOCKOUTS BOX COLOR OPTIONS SIZE MATERIAL
FOR RNBB STYLE BOXES ONLY
H - HINGE SYSTEMSH - SUPER-HINGE SYSTEM ( LEAVE THIS BLANK IF THERE ARE NO HINGE SYSTEM DESIRED )
HOW MANY LOCKSINSTALLED IN BOX ?
PG - PROTEC GRAYBE - BEIGEBR - BRICK REDOW - OFF WHITEXX - OTHER ( SPECIFY ON OPTION PAGE )
S - STANDARD KNOCK-OUTSC - CUSTOM KNOCK-OUTS ( IF CUSTOM SPECIFY ON OPTION PAGE )
WIDTH x HEIGHT x DEPTHDIMENSIONS OF BOX
RNH - ROUGHNECK HINGEDRNB - ROUGHNECK BASICRNBB - ROUGHNECK BOX-IN-BOXRNHL - ROUGHNECK HANGING-LIDM1 - ROUGHNECK ULTRA SERIESRTP - ROUGHNECK TOM PED
SL - SUPRAPL - PLUGIL - INNERTITEMX - MXML - MASTERAL - ACEDV - DIVERSIFIEDHA - HASPXX - OTHER ( SPECIFY ) SEE OPTIONS PAGE FOR LOCK # IF APPLICABLE
N - NOY - YES ( SPECIFY )
A - ALUMINUMS - STEEL ( SPECIFY )
I.D. #
Multilink’s Installation & Construction Catalog
SECTIO
N 1
MD
U EN
CLO
SUR
ES / INSTA
LLATIO
N
9
MDU ENCLOSURESOptions Page
TOP
FRONT
BOTTOM
LEFT SIDE RIGHT SIDE
BACK
BOX I.D. #
LOCK OPTIONS
TYPE OF LOCK
LOCK #
SHOULD WAREHOUSE SEND KEYS ?YES NO
SHOULD THE LOCK BE INSTALLED ?YES NO
* LIST ANY SPECIAL LOCK INSTRUCTIONS BELOW:
SHIPPING INSTRUCTIONSBUBBLE WRAP
INDIVIDUAL BOX
BULK
NOTES
KNOCKOUTS
TYPE OF KNOCKOUT:
A
B
C
D
J
P
T
R0250
R0500
R0562
R0630
R1000
R2000
R3000
R4000
*PLEASE SEE ATTACHED PAGE FOR THE LOCATIONSAND TYPE OF KNOCKOUTS FOR THIS BOX
2 STAGE: 1.375” x 2.46875”
2 STAGE: 1.375” x 2.25”
2 STAGE: .875” x 1.125” x 1.375” x 1.75”
3 STAGE: 1.375” x 1.96875” x 2. 46875”
“J” STYLE
PVC
TRAPAZOID
ROUND .250
ROUND .500
ROUND .562
ROUND .630
ROUND 1.000
ROUND 2.000
ROUND 3.000
ROUND 4.000
OPTIONAL ACCESSORIESPLEASE CIRCLEOPTIONS: INSTALL:
D-MARK DROP STANDRMD-12RMD-18RMD-24
STAR PLATERNX-5101RNX-9141RNX-15171
SCREEN PLATERGSB-12RGSB-18RGSB-20RGSB-24
D-MARKOXBOARDPLYWOODGROUND LUGTAP BRACKETRNRC-10060078-DRY LIDSPECIAL PLATEOTHER
Multilink’s Installation & Construction Catalog
SEC
TIO
N 1
MD
U E
NC
LOSU
RES
/ I
NST
ALL
ATI
ON
10
MDU ENCLOSURERSTom Ped Double Box Pedestal High Security Protection
Tom Ped is the answer to these types of MDU problems.
• INCREASED SECURITY• DECREASED COST• CLEANER INSTALLATIONApplicationThe only hybrid high security box-in-box and pedestal enclosure. Designed for broadband multimedia systems. This concept offers two levels of high security against illegal hook-ups, and keeps your cable well managed. Can be firmly bolted to the wall or staked to the ground. Features & Benefits • Box-in-box design. • Can be keyed to match any manufacturer’s locking system • Built to last with high-grade construction materials • 100% fusion welded construction for greater durability and quality control of welds • Textured steel holds paint better. • UL 50 standard outdoor box rating • Gray baked-on polyester powder coating • Scratch and salt spray tested • ASTM rating
Star mounting plate for equipment installation
Drop and trap organization
Active subscriber drops
Tamper proof screws available
STOPS ILLEGALSIn the unlikely case that the cover
is ever forced off, there still remains a second line of defense. An illegal
hook-up is prevented because all un-connected drops are still hidden and
protected in the lower inner box!
Available in Steelor Aluminum
Multilink’s Installation & Construction Catalog
SECTIO
N 1
MD
U EN
CLO
SUR
ES / INSTA
LLATIO
N
11
MDU ENCLOSURESTom Ped Double Box Pedestal High Security Protection
Features & Benefits • Now available in depths of 10” and 15” • Available in Aluminum or Steel• Available with Star Slam Lock
Item Part# Description Dimensions UOM
A - RTP-4216 Standard Tom Ped 42”H x 16”W x 8”D Each
B - RTP-1548 Standard Tom Ped 40”H x 15”W x 8”D Each
C - RTP-1834 Standard Tom Ped 36”H x 12”W x 8”D Each
D - RTP-8032 Standard Tom Ped 32”H x 8”W x 8”D Each
- 12824 BS-24 Pedestal Stake For Tom Ped Double Box Pedestal 24” Each
- 12832 BS-32 Pedestal Stake For Tom Ped Double Box Pedestal 32” Each
- 12845 BS-42 Pedestal Stake For Tom Ped Double Box Pedestal 42” Each
- 12833 RN-TPTB Tom Ped Tap Bracket - Each
Stock codes vary depending on options such as locks and other accessories Please call Customer Service for custom sizes, configurations, and lock specifications
A
B C
D
RTP-15408Hinged door series includes 3 heavy duty slip hinges for maintenance ease. Above box features a tamper-proof screw slam lock.
RTP-1548Box-in-Box style RTP with cut away sides and adjustable star and D-Mark plate. Features tamper-proof screw slam lock.
Van LockThis particular box features a Van Lock Plug Lock with customized placement.
RTP-36115“Box-in-Box” style pedestal with full sides. Box includes D-Mark plate with two mounting options. Also available with star plate and various locking options. Please call Customer Service for more information.
Multilink’s Installation & Construction Catalog
SEC
TIO
N 1
MD
U E
NC
LOSU
RES
/ I
NST
ALL
ATI
ON
12
MDU ENCLOSURERSTom Ped Double Box Pedestal High Security Protection
Multilink’s Installation & Construction Catalog
SECTIO
N 1
MD
U EN
CLO
SUR
ES / INSTA
LLATIO
N
13
MDU ENCLOSURERSFlush Mount Pre-Wire Box For New and Post Construction Applications
Applications Make pre-wiring jobs easier with the RNSB-69 Pre-Wire box from Multilink. It’s designed for use in common junction locations for pre-wiring in new and post construction applications. It mounts easily to the stud and is adjustable to any size drywall.
Features & Benefits• Comes complete with mounting hardware • Can be used in both new and post-construction applications• Mounts easily to stud and is adjustable to accommodate all sizes of drywall• Two knockouts on both top and bottom• Cover is coated with durable white powder coating• Custom logos and imprints are available
Part# Description Dimensions UOM
10799K RNSB-69 Flush Mount Pre-wire Box 9-1/2”H x 6-1/2”W x 3-3/4”D Each
11568K RNSB-1214 Flush Mount Pre-wire Box ( Non-standard Item ) 12”H x 14”W x 3”D Each
All stock codes listed are for standard options only Please call Customer Service for custom sizes, configurations, and lock specifications
Multilink’s Installation & Construction Catalog
SEC
TIO
N 1
MD
U E
NC
LOSU
RES
/ I
NST
ALL
ATI
ON
14
MDU ENCLOSURERSM1™ Ultra Series
Step up to a new level in high security steel enclo-sures with the M1™ ultra high security MDU steel enclosure.
Applications The heavy duty box-in-box design combined with the unique hardened steel security bar closure as-sembly makes the M1™ as tough as a tank!
Features & Benefits The M1™ Ultra Series is constructed with the cover robotically seam welded, a feature not offered by any other steel enclosure manufacturer in the Cable TV industry! The key to the higher level of security offered by the M1™ Ultra Series box is in the 7/8” di-ameter steel Ultra Bar which runs through the steel inner bottom and cover of the box and features a ½” shackle hole ready to accept practically any high security padlock. With so many features packed into a single steel enclosure it is easy to see why the new M1™ Ultra Series box is the ultimate in high security steel enclosures!
Part # Description Dimensions UOM
Varies W/ Options M1-12128 M1 Ultra Series Mdu Enclosure 2 Standard Knockouts On Bottom & Back 12”W x 12”H x 8”D Each
Varies W/ Options M1-12188 M1 Ultra Series Mdu Enclosure 2 Standard Knockouts On Bottom & Back 12”W x 18”H x 8”D Each
Varies W/ Options M1-15188 M1 Ultra Series Mdu Enclosure 2 Standard Knockouts On Bottom & Back 15”W x 18”H x 8”D Each
Varies W/ Options M1-18248 M1 Ultra Series Mdu Enclosure 2 Standard Knockouts On Bottom & Back 18”W x 24”H x 8”D Each
10-5476 M1-12 Hardened Steel Security Bar 12” Each
10-5477 M1-15 Hardened Steel Security Bar 15” Each
10-5480 M1-18 Hardened Steel Security Bar 18” Each
12575 7700aa275 Heavy Duty Block Lock .875” Shackle Each
12709k Roughneck Lid Retaining Cable With 1 Hook - Each
12712k Roughneck Lid Retaining Cable With 2 Hooks - Each
Stock codes vary depending on options such as locks and other accessoriesPlease call Customer Service for custom sizes, configurations, and lock specifications
Multilink’s Installation & Construction Catalog
SECTIO
N 1
MD
U EN
CLO
SUR
ES / INSTA
LLATIO
N
15
MDU ENCLOSURERSRNBB Box-in-Box High Security Series Enclosure Options
Features & Benefits • High security bearing sleeve at locking point • Gray baked on powder coating; UL standards outdoor box rating, high corrosion resistance • Full back with multiple entry knockout • Key style mounting holes for easy installation • Drain holes to keep moisture out • Available with Star Slam Lock• MX and DX locking keyways available • Available in steel or aluminum • If aluminum is desired, add an A to the end of the part number
RNBB Closed Shown with Standard Hinge OptionShown with Super Heavy DutyHinge Option
Removable Back Panel
RearMultistageKnockouts
Lock Pin ThatAutomatically
Engages When Box Is Closed
Super Hinge
Mouse Hole KnockoutsFor Multistage Cable
And Back Plate Options
Multilink’s Installation & Construction Catalog
SEC
TIO
N 1
MD
U E
NC
LOSU
RES
/ I
NST
ALL
ATI
ON
16
MDU ENCLOSURERSRNBB Box-in-Box High Security Series Enclosures
All boxes listed below come with standard “A” size knockouts: 2 Bottom / 2 Back / 2 Top.
Star Slam Lock Option shown here
Star Slam Lock Option shown again herein another box
Part# Description Dimensions UOM
Varies W/ Options RNBB-12128 Box-In-Box High Security Enclosure 12”w X 12”h X 8”d Each
Varies W/ Options RNBB-12188 Box-In-Box High Security Enclosure 12”w X 18”h X 8”d Each
Varies W/ Options RNBB-15188 Box-In-Box High Security Enclosure 15”w X 18”h X 8”d Each
Varies W/ Options RNBB-18248 Box-In-Box High Security Enclosure 18”w X 24”h X 8”d Each
Varies W/ Options RNBBH-12128 Box-In-Box High Security Enclosure With Standard Hinge Option 12”w X 12”h X 8”d Each
Varies W/ Options RNBBH-12188 Box-In-Box High Security Enclosure With Standard Hinge Option 12”w X 18”h X 8”d Each
Varies W/ Options RNBBH-15188 Box-In-Box High Security Enclosure With Standard Hinge Option 15”w X 18”h X 8”d Each
Varies W/ Options RNBBH-18248 Box-In-Box High Security Enclosure With Standard Hinge Option 18”w X 24”h X 8”d Each
Varies W/ Options RNBBSH-12128 Box-In-Box High Security Enclosure With Heavy Duty Super Hinge Option 12”w X 12”h X 8”d Each
Varies W/ Options RNBBSH-12188 Box-In-Box High Security Enclosure With Heavy Duty Super Hinge Option 12”w X 18”h X 8”d Each
Varies W/ Options RNBBSH-15188 Box-In-Box High Security Enclosure With Heavy Duty Super Hinge Option 15”w X 18”h X 8”d Each
Varies W/ Options RNBBSH-18188 Box-In-Box High Security Enclosure With Heavy Duty Super Hinge Option 18”w X 24”h X 8”d Each
Stock codes vary depending on options such as locks and other accessories Please call Customer Service for custom sizes, configurations, and lock specifications All boxes listed below come with standard “A” size knockouts: 2 Bottom / 2 Back / 2 Top
Multilink’s Installation & Construction Catalog
SECTIO
N 1
MD
U EN
CLO
SUR
ES / INSTA
LLATIO
N
17
MDU ENCLOSURERSRNBB-PLT Enclosure
RNBB-PLT-12128
Features & Benefits• Back plate can remain mounted to wall during maintenance to allow your customer uninterrupted service • Gray baked-on powder coating; UL standards outdoor box rating, high corrosion resistance • Drain holes to keep moisture out • Designed with PVC style knockouts to accommodate a quick and easy separation from back plate • Available in steel or aluminum
Part# Description Dimensions UOM
Varies W/ Options RNBB-PLT-12128 Box-In-Box High Security Enclosure 12”W x 12”H x 8”D Each
Varies W/ Options RNBB-PLT-12188 Box-In-Box High Security Enclosure 12”W x 18”H x 8”D Each
Varies W/ Options RNBB-PLT-15188 Box-In-Box High Security Enclosure 15”W x 18”H x 8”D Each
Varies W/ Options RNBB-PLT-18248 Box-In-Box High Security Enclosure 18”W x 24”H x 8”D Each
Multilink’s Installation & Construction Catalog
SEC
TIO
N 1
MD
U E
NC
LOSU
RES
/ I
NST
ALL
ATI
ON
18
MDU ENCLOSURERSTelephony Broadband Double Door Enclosure
Features & Benefits• Now available in depths of 10” and 15”• Available in aluminum• Hinged 2-door cover• Gray baked-on polyester powder coating
Options• 2 separated compartments • Standard accessories • Various locking hardware • Standard knockouts, size and location • Voice port mounting plates
Part# Description Dimensions UOM
Varies W/ Options RN2H-18248 Telephony Broadband Double Door Enclosure 18”W x 24”H x 8”D Each
Varies W/ Options RN2H-24248 Telephony Broadband Double Door Enclosure 24”W x 24”H x 8”D Each
Varies W/ Options RN2H-36368 Telephony Broadband Double Door Enclosure 36”W x 36”H x 8”D Each
Multilink’s Installation & Construction Catalog
SECTIO
N 1
MD
U EN
CLO
SUR
ES / INSTA
LLATIO
N
19
MDU ENCLOSURERSRNH Hinged Series Enclosures
Features & Benefits• Hinged cover• Gray baked-on polyester powder coating. UL 50 standard outdoor box rating, high corrosion resistance • Knockout for optional Cam Lock • Multiple entry knockouts • Indented mounting holes for easy installation • 3/4” D-Knockout • Drain holes to keep moisture out • Available with Star Slam Lock
Standard Knockouts
Box Style Knockouts Sizes
RNH-10126 2 Bottom 1 Size A / 1 Size C
RNH-12188 2 Bottom 1 Size A / 1 Size C
RNH-12186 3 Bottom 2 Size A / 1 Size C
RNH-20246 3 Bottom 2 Size A / 1 Size C
RNH-20248 3 Bottom 2 Size A / 1 Size C
RNH-24368 3 Bottom 2 Size A / 1 Size C
RNH-36368 3 Bottom 2 Size A / 1 Size C
Part# Description Dimensions UOM
Varies W/ Options RNH-10126 Hinged Series Enclosure 10”W x 12”H x 6”D Each
Varies W/ Options RNH-12188 Hinged Series Enclosure 12”W x 18”H x 8”D Each
Varies W/ Options RNH-12186 Hinged Series Enclosure 12”W x 18”H x 6”D Each
Varies W/ Options RNH-20246 Hinged Series Enclosure 20”W x 24”H x 6”D Each
Varies W/ Options RNH-20248 Hinged Series Enclosure 20”W x 24”H x 8”D Each
Varies W/ Options RNH-24368 Hinged Series Enclosure 24”W x 36”H x 8”D Each
Varies W/ Options RNH-36368 Hinged Series Enclosure 36”W x 36”H x 8”D Each
RNH Box with Drop Stand/Organizer Option
Custom sizes always availablePlease contact Customer Service for more information
Uses same replaceable hasp system as RNB series boxes
Multilink’s Installation & Construction Catalog
SEC
TIO
N 1
MD
U E
NC
LOSU
RES
/ I
NST
ALL
ATI
ON
20
MDU ENCLOSURESRNB Series Enclosures
Box Style Standard Knockouts Knockout Sizes
RNB-8126 2 Bottom 2 Size C
RNB-12126 2 Bottom 1 Size B / 1 Size C
RNB-12188 3 Bottom 1 Size B / 2 Size C2 Each Side / 2 Size C
RNB-24188 4 Bottom 2 Size B / 2 Size C2 Each Side / 2 Size C
Part# Description Dimensions UOM
Varies W/ Options RNB-8126 Series Enclosure 8-1/8”W x 12”H x 6-1/8”D Each
Varies W/ Options RNB-12126 Series Enclosure 12-1/8”W x 12”H x 6-1/8”D Each
Varies W/ Options RNB-12188 Series Enclosure 12-1/8”W x 18”H x 8-1/8”D Each
Varies W/ Options RNB-24188 Series Enclosure 24”W x 18”H x 8-1/8”D Each
Features & Benefits• Gray baked-on polyester powder coating. UL 50 standard outdoor box rating, high corrosion resistance • Knockout for optional Cam Lock • Multiple entry knockouts • Indented mounting holes for easy installation • 3/4” D-Knockout • Drain holes to keep moisture out
Stock codes vary depending on options such as locks and other accessories Please call Customer Service for custom sizes, configurations, and lock specifications
Zinc chromate, replaceable hasp, standard with every RNB series box.
Multilink’s Installation & Construction Catalog
SECTIO
N 1
MD
U EN
CLO
SUR
ES / INSTA
LLATIO
N
21
Features & Benefits• Can be set up with a variety of cylinder locks, the Innertite Lock, or a tamper proof screw • Gray baked-on polyester powder coating, UL standards outdoor box rating, high corrosion resistance • Multiple entry knockouts • Drain holes keep moisture out
Multilink is the only manufacturer of steel enclosures for the Cable TV industry that offers built-in drain holes standard throughout the entire product line
Part# Description Dimensions UOM
Varies W/ Options RNHL-444 Hanging Lid Series Enclosure 4” W x 4” H x 4” D Each
Varies W/ Options RNHL-464 Hanging Lid Series Enclosure 4” W x 6” H x 4” D Each
Varies W/ Options RNHL-664 Hanging Lid Series Enclosure 6” W x 6” H x 4” D Each
Varies W/ Options RNHL-684 Hanging Lid Series Enclosure 6” W x 8” H x 4” D Each
Varies W/ Options RNHL-884 Hanging Lid Series Enclosure 8” W x 8” H x 4” D Each
Varies W/ Options RNHL-10104 Hanging Lid Series Enclosure 10” W x 10” H x 4” D Each
Varies W/ Options RNHL-10124 Hanging Lid Series Enclosure 10” W x 12” H x 4” D Each
Varies W/ Options RNHL-12124 Hanging Lid Series Enclosure 12” W x 12” H x 4” D Each
Varies W/ Options RNHL-666 Hanging Lid Series Enclosure 6” W x 6” H x 6” D Each
Varies W/ Options RNHL-886 Hanging Lid Series Enclosure 8” W x 8” H x 6” D Each
Varies W/ Options RNHL-8126 Hanging Lid Series Enclosure 8” W x 12” H x 6” D Each
Varies W/ Options RNHL-10106 Hanging Lid Series Enclosure 10” W x 10” H x 6” D Each
Varies W/ Options RNHL-12126 Hanging Lid Series Enclosure 12” W x 12” H x 6” D Each
Varies W/ Options RNHL-12166 Hanging Lid Series Enclosure 12” W x 16” H x 6” D Each
Varies W/ Options RNHL-12186 Hanging Lid Series Enclosure 12” W x 18” H x 6” D Each
Varies W/ Options RNHL-12128 Hanging Lid Series Enclosure 12” W x 12” H x 8” D Each
Varies W/ Options RNHL-12168 Hanging Lid Series Enclosure 12” W x 16” H x 8” D Each
Varies W/ Options RNHL-12188 Hanging Lid Series Enclosure 12” W x 18” H x 8” D Each
Multilink is the only manufacturer of steel enclosures for the Cable TV industry that offers built-in drain holes standard throughout the entire product line.Stock codes vary depending on options such as locks and other accessories. Please call Customer Service for custom sizes, configurations, and lock specifications.
MDU ENCLOSURESRNHL Hanging Lid Series Enclosure
Multilink’s Installation & Construction Catalog
SEC
TIO
N 1
MD
U E
NC
LOSU
RES
/ I
NST
ALL
ATI
ON
22
Features & Benefits• Can be set up with a variety of Cylinder Locks, the Innertite Lock, or a tamper proof screw • Gray baked on polyester powder coating, UL standards outdoor box rating, high corrosion resistance • Multiple entry knockouts • Drain holes keep moisture out
Special heavy duty grommets, shown above, are now avail-able on all MDU steel units.
Part# Description Dimensions UOM
Varies W/ Options RNHX-121210 Side Swing Hinge Series Enclosure 12”W x 12”H x 10”D Each
Varies W/ Options RNHX-121510 Side Swing Hinge Series Enclosure 12”W x 15”H x 10”D Each
Varies W/ Options RNHX-121810 Side Swing Hinge Series Enclosure 12”W x 18”H x 10”D Each
Varies W/ Options RNHX-181810 Side Swing Hinge Series Enclosure 18” W x 18”H x 10”D Each
Varies W/ Options RNHX-182410 Side Swing Hinge Series Enclosure 18”W x 24”H x 10”D Each
Varies W/ Options RNHX-242410 Side Swing Hinge Series Enclosure 24”W x 24”H x 10”D Each
13028 Small Heavy Duty Special Mdu Grommet - Each
70910 Large Heavy Duty Special Mdu Grommet - Each
Please call Customer Service for more informationStock codes vary depending on options such as locks and other accessoriesPlease call Customer Service for custom sizes, configurations, and lock specifications
MDU ENCLOSURESRNHX Side Swing Hinge Series Enclosure
Multilink’s Installation & Construction Catalog
SECTIO
N 1
MD
U EN
CLO
SUR
ES / INSTA
LLATIO
N
23
MDU TOOLS/ACCESSORIESRNI High Security Locking Systems For Roughneck Steel Enclosures
The MX High Security Customized Locking System-DX Compatible• The most secure lock ever developed specifically for the Cable TV industry. • Fully compatible with pre-existing DX keyways. • The MX Locking System, unlike the DX Meter and Superlock Systems, cannot be defeated by being drilled or bored out with a power drill or by the “car thief” slide hammer. • The unique, patented dual pin design makes the MX the most reliable lock in the industry.
Inner-Tite® Agbay Barrel Lock & KeyInner-Tite® Barrel Lock and Key
Van Lock Cam Lock Van Lock Cam Lock Key
Lock part numbers vary depending on type, key way, etc Please call Customer Service for more information
Multilink’s Installation & Construction Catalog
SEC
TIO
N 1
MD
U E
NC
LOSU
RES
/ I
NST
ALL
ATI
ON
24
MDU TOOLS/ACCESSORIESHigh Security Locking System For Roughneck Steel Enclosures
Van Lock Plug Lock Master Pad Lock Let’s Talk Security
Customized Lock
Ace/Chicago and American Locks with customized key codes can be ordered through Multilink Multilink is a full line distributor of American LocksThe Multilink data bank tracks all keys and drivers sold by six-digit number system For more details, please call Customer Service. Lock part numbers vary depending on type, key way, etc.
Supra LockPlastic Supra Lock Dry Lid
Self-locking CPLM1 is available in Cable Plug Lock-Master Series and CPLV Cable Plug Lock-Vanamatic (8 in 1).
Multilink is a full line distributor of the most trusted locks in the world, the Master Padlock with (2) keys.
New optional logo/six-digit code. Now you can track and know where your keys and drivers are!
Features & Benefits• Reduce passing/transferring of keys • Keep track of your security • Track theft of service • When issuing keys and drivers you can track by six-digit security with employees and subcontractors • Available on keys and tamper-proof drivers
NEEDS KEY PHOTO
Multilink’s Installation & Construction Catalog
SECTIO
N 1
MD
U EN
CLO
SUR
ES / INSTA
LLATIO
N
25
MDU TOOLS/ACCESSORIESThe Multilink Tamper Proof Drivers & Screws
MultiScrew Installed on self locking pedestals, lock boxes, and Tom Peds can be interchanged with some Multilink security products
Tamper Proof Screw Drivers Made from hardened steel, plated in Zinc Chromate
A B
Figure Part# Description UOM
A 12333Z RNED-101 Eccentric Driver Each
- 12334K RNED-101N Eccentric Driver Each
- 12073K RNED-501 Tamper Proof Driver Each
B 12335Z RNSD-200 Tamper Proof Driver Each
C
D
Star/Slam Lock screw available in custom patternCall Customer Service for more information
Figure Part# Description UOM
C 12814 RNE-501 Tamper Proof Screw Each
D 10-5275 RNE-100 Eccentric Thread Pitch Each
Multilink’s Installation & Construction Catalog
SEC
TIO
N 1
MD
U E
NC
LOSU
RES
/ I
NST
ALL
ATI
ON
A-D - Screen Plate E-J - Oxboard K-O - Touch-Up Paint
P-R - Star Plate S - D-Mark Plate T - Ground Lug
Figure Part# Description Dimensions UOM
A 12039K Screen Plate Fits 10” x 12” x 8”/12” x 12” x 8” Each
B 12040K Screen Plate 12” x 18” x 8” -
C 12041K Screen Plate 18” x 24” x 8” Each
D 12042K Screen Plate 20” x 24” x 8” -
E 12051K Oxboard Backing 8” x 12” x 8” Each
F 12044K Oxboard Backing 12” x 12” x 8” -
G 12046K Oxboard Backing 15” x 18” x 8” Each
H 12047K Oxboard Backing 18” x 24” x 8” -
I 12049K Oxboard Backing 20” x 24” x 8” Each
J 12050K Oxboard Backing 36” x 36” x 8” -
K 12715 Brown Touch-up Paint - Each
L 12716 Beige Touch-up Paint - -
M 12717 Bright-red Touch-up Paint - Each
N 12718 White Touch-up Paint - Each
O 12719 Grey Touch-up Paint - Each
P 12036K Star Plate Fits 10” x 12” x 8”/ 12” x 12” x 8” -
Q 12037K Star Plate 12” x 18” x 8” Each
R 12038K Star Plate 20” x 24” x 8” -
S 12043K D-Mark Plate For Roughneck Steel Enclosures - Each
T 12704K Ground Lug - -
26
MDU TOOLS/ACCESSORIESOptions and Accessories for Roughneck Steel Enclosures
Multilink’s Installation & Construction Catalog
SECTIO
N 1
MD
U EN
CLO
SUR
ES / INSTA
LLATIO
N
27
MDU TOOLS/ACCESSORIESOptions and Accessories for Roughneck Steel Enclosures
Keep from losing the detachable lids from your Roughneck Steel Enclo-sure with this high strength retain-ing cable with eyelets
New Tap Mounting Bracket Mount taps quickly and easily inside your roughneck box
Optional louvres available on yourMDU, please call Customer Service for more information
Part# Description UOM
12709 Roughneck Lid Retaining Cable With 1 Hook Each
12712 Roughneck Lid Retaining Cable With 2 Hooks Each
12708K RNBT-7 Tap Bracket Each
Why does Multilink use Galvanealed Steel vs. Aluminized Steel in the construction of our Steel MDU Enlcosures?
Gavanealed Steel - Starzinc-Alloy Aluminized Steel - Al-MightFeatures• Uniform zinc coated steel sheets feature paint adhesion quality not found in other coated steel sheets• Surface roughness encourages paint adhesion and provides base for finishing
Uses• Automobile Underbody parts, reinforcing parts• Outdoor Roofing, siding, shutters, doors, and traffic signs• Indoor Air conditioner housings, commercial refrigerators, washing machines, steel furniture, office machines, furnaces, and ovens
Features• Aluminum coated steel sheets offer high-grade resistance to corrosion and heat• Excellent heat reflective and good formability• Beautiful finish even under high temperature
Uses• Automobile Exhaust pipes, mufflers, catalytic converters, auto heat shields• Indoor Chimneys, fireplaces, stoves, heat exchangers, water heaters, furnaces, barbecue grills, ovens, and toasters
Aluminized Steel Al-Might
Galvanealed SteelStarzinc-Alloy
Multilink’s Installation & Construction Catalog
SEC
TIO
N 2
CA
BLE
MA
RK
ERS
28
MDU TOOLS/ACCESSORIESCable MarkersMFM Series Lasered Fiber Optic Cable Marker UV Stabilized Body for Weather and Color
• Standard/Stock Colors: Yellow and Orange. Custom Colors: Blue, Green, Gray, White, Brown, and Red• Please specify color when placing your order• Other custom colors available upon request• 500 Minimum Order with both RT & SL part numbers• 5,000 Minimum Order for custom colors• Please contact customer service for custom orders and more information• Please note: $75.00 one time set-up fee for special logo
Features & Benefits• Any print or logo your company desires• UV stabilized body• One step installation; Wrap-around design• Available in a variety of colors• Available in three different sizes• Lifetime warranty on printing and a 20 year pro-rated warranty on plastic body• Customization provides easy identification of your cables during emergencies or general maintenance• UV stabilized body won’t degrade in outside applications• Simple and quick installation: Wrap-around design eliminates the need for special tools and adhesives.• The variety of colors offered allow you to segregate your different fiber runs or to distinguish your cables from pre-existing cables• The three different sizes can accommodate a variety of cable configurations• Our marker will last the life of your system
J
Stock ID Description Dimensions Weight Lbs. UOM
A Varies MFM-12 Lasered Fiber Optic Cable Marker .5” x 8” (12.7mm x 20.3cm) - Each
B Varies MFM-15 Lasered Fiber Optic Cable Marker 1” x 8” (25.4mm x 20.3cm) - Each
C Varies MFM-20 Lasered Fiber Optic Cable Marker 2” x 8” (50.8mm x 20.3cm) - Each
D Varies MFM-12RT Custom Regular Type Name & # .5” x 8” (12.7mm x 20.3cm) - Each
E Varies MFM-15RT Custom Regular Type Name & # 1” x 8” (25.4mm x 20.3cm) - Each
F Varies MFM-20RT Custom Regular Type Name & # 2” x 8” (50.8mm x 20.3cm) - Each
G Varies MFM-12SL Custom Special Logo & # .5” x 8” (12.7mm x 20.3cm) - Each
H Varies MFM-15SL Custom Special Logo & # 1” x 8” (25.4mm x 20.3cm) - Each
I Varies MFM-20SL Custom Special Logo & # 2” x 8” (50.8mm x 20.3cm) - Each
J Varies *Flag Style Fiber Optic Cable Marker 3.75” L x 4” W - Each
A - I
Please contact customer service for custom orders and more information.
Multilink’s Installation & Construction Catalog
SECTIO
N 3
IMA
GE B
UILD
IMG
PR
OD
UC
TS
29
MDU TOOLS/ACCESSORIESDigital Converter Totes• Transport made easy• Protect your hardware while improving your image and organization
Rolling DigitalConverter Tote
Techbag Tote
DigitalConverter Tote
Converter Bags For CSR’sWhen receiving converters back,
the bags snuffs out insectsShoe Covers
Keeps carpet clean and bills downONE SIZE FITS ALL
Multilink’s Installation & Construction Catalog
SEC
TIO
N 3
IMA
GE
BU
ILD
IMG
PR
OD
UC
TS
30
DIGITAL CONVERTER TOTESThe Rolling Digital Converter Tote Transport Made EasyNot only holds and protects DVR and Converters, but also holds VOIP installation cables,high speed modems and other hardware and accessories
Part# Description Dimensions Weight Oz UOM
10-9440 Roller Tote 22” L x 19” W x 17” D 6 Each
Will Vary Logo Tech Bag 22”L x 19”W x 17”D 6 Each
Multilink’s Installation & Construction Catalog
SECTIO
N 3
IMA
GE B
UILD
IMG
PR
OD
UC
TS
31
DIGITAL CONVERTER TOTESThe Tech Bag It’s Your Image That Count
Part# Description Dimensions Weight Oz. UOM
10-8139 Tech Bag 22” L x 8” W x 16” D 3 Each
Will Vary Logo Tech Bag 22” L x 8” W x 16” D 3 Each
Benefits• Improve your professional image• Transport the growth of increased hardware offering into the home• Safer way of transporting converters and added hardware• Keeps the Tech organized• Custom logo available on techbag• Reduces repair costs when transporting converters and hardware
Multilink’s Installation & Construction Catalog
SEC
TIO
N 3
IMA
GE
BU
ILD
IMG
PR
OD
UC
TS
32
DIGITAL CONVERTER TOTESProtect Your Digital & Analog Converter Investment
Features & Benefits• Lockable security• Easy to maintain• Washable• Cell/inserts are replaceable• Attached cover• Highly durable• Stackable
Part# Description Dimensions UOM
37130 242015-B Gray Plastic Tote (6 Converters) 26” L x 19” W x 14.875” H Each
37333 242517-P Foam Shock Pad 24.5” L x 18” W Each
37115 214124-DCT Plastic Cell For DCT-1000/Terminal Block 18” L x 3” W x 13.625” H Each
37111 221157-B Gray Plastic Tote (4 Converter) 19.75” L x 14.5” W x 16.875” H Each
37112 218134-P Foam Shock Pad 18.4375” L x 13.25” W Each
37113 214123-DCT Plastic Cell For DCT-1000/Terminal Block 19” L x 2.875” W x 15” H Each
- Tech Bag Holds 3 Converters Each
Great for transporting in and warehouses and back to repair center
Multilink’s Installation & Construction Catalog
SECTIO
N 3
IMA
GE B
UILD
IMG
PR
OD
UC
TS
33
IMAGE BUILDING PRODUCTSCB Converter Bags & Disposable Shoe Covers
Features & Benefits• Converter Dispenser Repackaging bags are available in quantities of 500 per easy to use dispenser box• Each bag has space to write the date, the subscriber’s name, address, and account number along with an area for comments regarding the performance or condition of the converter• Each bag has a built-in plastic tie strip to seal the bag and is made from a durable 2 mil. clear poly film• Custom imprinting and/or logos are available Please call Customer Service for details• Reduces the roach and pest problems along with the handling of the converters in the field and office area• Converter disconnections, upgrades, and repair problems are handled quickly and easily with write-on disposable bags• Operations run more efficiently• Reduces scratches• Keeps converter dust free while sitting on the shelf
Features & Benefits• The Disposable Shoe Covers are made of poly-latex, no-skid material• The Disposable Shoe cover fits a size 16 shoe and lower (one size fits most)• The Disposable Shoe Covers are a new and inexpensive product from Multilink used to prevent tracking mud, dirt, grease, etc. on the floors and carpet of subscribers• No more angry phone calls from subscribers upset with dirt on their floors and carpets!• No more carpet cleaning bills from the dirty floors of subscribers • Improve image of the cable system as being professional, “One who cares about work and customers!”• Improve the productivity of the installer because he/she doesn’t have to spend time taking his/her boots/shoes off and on before entering the home
Figure Part# Description Dimensions UOM
A 10-8141 CB-2026 Converter Bag 20” x 26” 500/Box
B 37911 SCJM-402-XD Work Boot & Regular Shoe Style - 50 Pair/Box
C 37922 SCJM-402-DW High Top Boot Style - 50 Pair/Bag
A B C
Multilink’s Installation & Construction Catalog
SEC
TIO
N 4
MA
INTE
NA
NC
E TO
OLS
34
A B C
D E F
The Multilink Tap Port Cleaner and Thread Chaser Tool is four tools in one! One side of the tool cleans off the tap threads just like a battery terminal cleaner. The second wire brush cleans the facing of the port, where the signal makes contact with the F-Connector. The other end of the tool re-taps the threads on the Tap Port Cleaner and doubles as an F-Connector Push-On Tool. Each of these features ensure better connectorization and signal contact with the F-Connector.
Features & Benefits• Crimps the center pin to a 0.100 hex (2.54mm)• Crimps RG6 and RG53 universal ribbed connectors to a 360 hex (9.15mm)• Crimps RG11 connectors to a .475 hex (12.07mm)
Figure Part# Description Dimensions UOM
A 42340 UP-B76 Co-Axial Cable Cutter - Each
B 42350 63050 Co-Axial High Leverage Cable Cutter - Each
C 42258 1099-CT CATV Compression Connector Crimp Tool SNS RG7/11 - Each
D 42120 CS-8030 Circle Strip For RG6/RG59 - Each
E 900031823 3155-CT Crimping Tool 8” Long Each
F 38173K 5555-JLPC Tap Port Cleaner Thread Chaser Tool - Each
- 38183K 5555-JLPC WBK Replacement Kit (Includes 2 Brushes & 2 Stones) - Each
PREP TOOLSCable Prep Tools
Multilink’s Installation & Construction Catalog
SECTIO
N 4
MA
INTEN
AN
CE TO
OLS
35
A B C DImproper connection of the F-Connector is the number one cause of CLI signal leakage! Using a Multilink Torque Wrench can ensure proper connectorization, signal connectorization, and signal contact with the F-Connector at a minimum cost. State size, poundage, and quantity when ordering.
Figure Part# Description Dimensions UOM
A 38025K 5520-TW, Torque Wrench 20 Inch/Pounds .375” (9.525mm) Each
A 38026K 5525-TW, Torque Wrench 25 Inch/Pounds .375” (9.525mm) Each
A 38035K 5530-TW, Torque Wrench 30 Inch/Pounds .375” (9.525mm) Each
A 38045K 5540-TW, Torque Wrench 45 Inch/Pounds .375” (9.525mm) Each
A 38020K 5520-TW, Torque Wrench 20 Inch/Pounds .4375” (11.112mm) Each
A 38028K 5525-TW, Torque Wrench 25 Inch/Pounds .4375” (11.112mm) Each
A 38031K 5530-TW, Torque Wrench 30 Inch/Pounds .4375” (11.112mm) Each
A 38040K 5540-TW, Torque Wrench 40 Inch/Pounds .4375” (11.112mm) Each
A 38024K 5520-TW, Torque Wrench 20 Inch/Pounds .5” (12.7mm) Each
A 38029K 5525-TW, Torque Wrench 25 Inch/Pounds .5” (12.7mm) Each
A 38034K 5530-TW, Torque Wrench 30 Inch/Pounds .5” (12.7mm) Each
A 38044K 5540-TW, Torque Wrench 40 Inch/Pounds .5” (12.7mm) Each
A 38023K 5520-TW, Torque Wrench 20 Inch/Pounds .5625” (14.287mm) Each
A 38036K 5525-TW, Torque Wrench 25 Inch/Pounds .5625” (14.287mm) Each
A 38037K 5530-TW, Torque Wrench 30 Inch/Pounds .5625” (14.287mm) Each
A 38038K 5540-TW, Torque Wrench 40 Inch/Pounds .5625” (14.287mm) Each
A 38039K 5520-TW, Torque Wrench 20 Inch/Pounds .625” (15.875mm) Each
A 38049K 5525-TW, Torque Wrench 25 Inch/Pounds .625” (15.875mm) Each
A 38032K 5530-TW, Torque Wrench 30 Inch/Pounds .625” (15.875mm) Each
A 38046K 5540-TW, Torque Wrench 40 Inch/Pounds .625” (15.875mm) Each
B 38219K 5520-TW, Adj Torque Wrench 20 Inch/Pounds .875” (0-22.225mm) Each
B 38018K 5525-TW, Adj Torque Wrench 25 Inch/Pounds .875” (0-22.225mm) Each
B 38017K 5530-TW, Adj Torque Wrench 30 Inch/Pounds .875” (0-22.225mm) Each
B 38016K 5540-TW, Adj Torque Wrench 40 Inch/Pounds .875” (0-22.225mm) Each
C 38051K 5520-SSTW, Torque Wrench 20 Inch/Pounds - Each
C 38030K 5525-SSTW, Torque Wrench 25 Inch/Pounds - Each
C 38050K 5530-SSTW, Torque Wrench 30 Inch/Pounds - Each
C 38042K 5540-SSTW, Torque Wrench 40 Inch/Pounds - Each
D 38946 5510-TWP, “Get Torqued” Torque Wrench 10.5 Inch/Pounds - Each
PREP TOOLSTorque Wrenches
Multilink’s Installation & Construction Catalog
SEC
TIO
N 4
MA
INTE
NA
NC
E TO
OLS
36
Cable Splicer’s Knife Fiber Optic Cleaver
Fiber Optic Stripping Kit
Features & Benefits• Tough, coping-style blade• Forged steel• Full-size, high dielectric, red cushioned handle
Features & Benefits• The revolutionary new cleaving tool from the leader in Fiber Optic Tools!• Small, compact size for field service work• After cleaving, fiber is held for safe disposal• Accommodates glass fibers with 125 µm nominal cladding diameters in cable or coated form
CLEAVE ANGLE
<1/2 degrees 50% of all cleaves
<1 degree 75% of all cleaves
<2 degrees 100% of all cleaves
• Factory replaceable carbide blade designed to yield consistent cleaves for up to 1,000 uses• Cleave length adjustable from 0.25” to 0.75” (6.5mm to 20mm) • Plated steel handles with plastic grips• Anodized aluminum cleaving blocks/fixtures • Polyurethane rubber cleaving and gripping pads• Optimal operating temperature: 72°F (23°C)
Three piece kit contains: • FOJS-2 Jacket Stripper• KS 68 1/2 SF Kevlar™ shear• FOS203 (min. cutting dia. 175 microns) Fiber Optic Stripper
FIGURE PART# DESCRIPTION DIMENSIONS WEIGHT UOM
A 99000000000CSK6 CSK6 Red Handle Cable Splicer Knife 6.25” (15.9cm) 1.5 Lbs Each
B 990000000FOC125 FOC125 Fiber Optic Cleaver 5.125” (13cm) x 1.75” (4.5cm) 0.15 Lbs Each
C 99000000FOS203K FOS202 Fiber Optic Stripping Kit 4” (10cm) X 6.25” (15.9cm) 1 Lbs Each
A B
C
PREP TOOLSFiber Prep Tools
Multilink’s Installation & Construction Catalog
SECTIO
N 4
MA
INTEN
AN
CE TO
OLS
37
Fiber Optic Strippers Fiber Optic Jacket Stripper
Fiber Optic Jacket Strippers
Features & Benefits• Mechanically strip buffer coating • Accurate to 5m (0.0002”)• No adjustments necessary • Color-coded handles for quick identifications• All fiber optic strippers are 5-1/4” (13.3cm) overall length and individually boxed
Features & Benefits• For stripping 125 micron fiber with 250 micron buffer coating• 0.78” (1.98mm) diameter stripping hole at tip of tool can be used to strip the fiber jacket• 0.0055 (0.014mm) diameter hole and V-opening in blade allows removal of 250 micron buffer coating from 125 micron fiber• Pre-set at the factory. No adjustments needed!• Will not scratch or knick glass fiber• All cutting surfaces are manufactured to precise tolerances to assure clean, smooth strips• Comfort-grip, ergonomic handles • Lock to hold tool closed when not in use• Made in the USA
Features & Benefits• Removes outside jacket from various sizes of fiber optic cable• Always leaves a clean strip• Color-coded cushion grip handles
A B
C
Figure Part# Description Dimensions Weight UOM
A 990000000FOS127 FOS127 127 µm/ 0.005” Min. Cutting Diameter Silver Handle Cover
5.25” (13.3cm) 0.25 Lbs Each
A 990000000FOS152 FOS152 152 µm/ 0.006” Min. Cutting Diameter Gold Handle Cover
5.25” (13.3cm) 0.25 Lbs Each
A 990000000FOS175 FOS175 175 µm/ 0.007” Min. Cutting Diameter Mustard Handle Cover
5.25” (13.3cm) 0.25 Lbs Each
A 73302 FOS203 203 µm/ 0.008” Min. Cutting Diameter Red Handle Cover
5.25” (13.3cm) 0.25 Lbs Each
A 99000000FOS254 FOS254 254 µm/ 0.010” Min. Cutting Diameter Light Blue Handle Cover
5.25” (13.3cm) 0.25 Lbs Each
A 9900000FOS305 FOS305 305 µm/ 0.012” Min. Cutting Diameter White Handle Cover
5.25” (13.3cm) 0.25 Lbs Each
B 9900000000FOJS1 FOJS-1 0.75mm (0.030”) Dia. & 1.00mm (0.40”) Dia. Cables Pink Handle Cover
5” (12.7cm) 0.75 Lbs Each
B 9900000000FOJS2 FOJS-2 1.25mm (0.050”) Dia. & 1.50mm (0.060”) Dia. Cables Maroon Handle Cover
5” (12.7cm) 0.75 Lbs Each
C 73306 FOS-1 (CFS-2) Fiber Optic Jacket Stripper 6.5” (16.5cm) 0.25 Lbs Each
PREP TOOLSFiber Prep Tools
Multilink’s Installation & Construction Catalog
SEC
TIO
N 4
MA
INTE
NA
NC
E TO
OLS
38
Figure Part# Description Dimensions UOM
A 73301 2CL-310-VL Cleaver 250/900 Fitel S-315 - Each
B 6002MS4RB25S K-MS-4-RB-25S Micro-Strip Prelacement Blade - Each
B 73356 2MS1-RT-13 Micro-Strip Tube Guide (0.0135 DIA.) - Each
B 73357 2MS-1-RB-06N Micro-Strip Replacement Blade - Each
C 73304 86 1/2-S Wire Cutter - Each
D 73355 2MS-1-FS Micro-Strip Handle - Each
E 73305 2925 Electrician’s Scissors - Each
F 42130 85-0003 Slitting/Ringing Tool For Cable .25” x 1.5” Each
C D
E F
A B
PREP TOOLSFiber Prep Tools
Multilink’s Installation & Construction Catalog
SECTIO
N 5
PLA
STIC D
EMA
RC
ATIO
N EN
CLO
SUR
ERS
Features• NEMA/EEMAC Type 4, 4X, 12 specifications• UL 508 listed, Type 1, 2, 3, 3R, 4, 4X, 12, 13• CSA certified LR 89590 for use with industrial equipment CSA Enc. 1, 2, 3, 4, 4X, 12, 13• Strong, molded fiberglass reinforced polyester construction with matching flat cover• Gasket made of closed cell neoprene cord encased in a continuous channel• 304 stainless steel wall mounting feet with 10-32 stainless steel screws included• 10-32 thread inserts are installed for optional back panel• Fiberglass material is easily punched, drilled or sawed• UV stabilized for outdoor use
Options• Optional painted carbon steel back panels• Optional aluminum back panels• Custom size polycarbonate viewing windows hinge installed on short side• Molded-in color matches• EMI/RFI shielding• Factory supplied silk screening
Part# Description Dimensions UOM
10-9001 AM 664 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 6.1” A x 6.1” B x 4.18” C Each
10-9002 AM 864 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 8” A x 6.12” B x 4.13” C Each
10-9003 AM 1084 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 10.13” A x 8.26” B x 6.13” C Each
10-9004 AM 1086 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 10.13” A x 8.26” B x 6.13” C Each
10-9005 AM 1206 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 12.13” A x 10.26” B x 6.13” C Each
10-9006 AM 1426 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 14.13” A x 12.26” B x 6.13” C Each
10-9007 AM 1648 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 16.27” A x 14.4” B x 8.13” C Each
10-9008 AM 1868 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 18.4” A x 16.4” B x 8.13” C Each
10-9009 AM 2068 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 20” A x 16” B x 8.13” C Each
10-9010 AM 664L SERIES JIC Size Junction Boxes With Hinged Cover 6.1” A x 6.1” B x 4.18” C Each
10-9011 AM 864L SERIES JIC Size Junction Boxes With Hinged Cover 8” A x 6.12” B x 4.13” C Each
10-9012 AM 1084L SERIES JIC Size Junction Boxes With Hinged Cover 10.13” A x 8.26” B x 6.13” C Each
10-9013 AM 1086L SERIES JIC Size Junction Boxes With Hinged Cover 10.13” A x 8.26” B x 6.13” C Each
10-9014 AM 1206L SERIES JIC Size Junction Boxes With Hinged Cover 12.13” A x 10.26” B x 6.13” C Each
10-9015 AM 1426L SERIES JIC Size Junction Boxes With Hinged Cover 14.13” A x 12.26” B x 6.13” C Each
10-9016 AM 1648L SERIES JIC Size Junction Boxes With Hinged Cover 16.27” A x 14.4” B x 8.13” C Each
10-9017 AM 1868L SERIES JIC Size Junction Boxes With Hinged Cover 18.4” A x 16.4” B x 8.13” C Each
10-9018 AM 2068L SERIES JIC Size Junction Boxes With Hinged Cover 20” A x 16” B x 8.13” C Each
39
C
A
B
SPLICE CLOSURESAM Series JIC Size Junction Box
Multilink’s Installation & Construction Catalog
SEC
TIO
N 5
PLA
STIC
DEM
AR
CA
TIO
N E
NC
LOSU
RER
S
40
SPLICE CLOSURESML-200 Telephony Demarcation EnclosureIdeal for terminating phone drops in cable VOIP installations
Features• Wall or pole mountable• Integrated security features• Hinged cover for ease in access• Corrosion and weatherproof for outdoor applications• Impact resistant and UV resistant for maximum field survivability
Part# Description Dimensions UOM
10-6897 ML-200 Telephony Demarcation Enclosure 3.24” W x 5” H x 2.5” D Each
Standard color is Gray
BenefitsThe Multilink ML-200 series telephony demarcation enclosure is a weatherproof outdoor product designed to allow for the interconnection or repair of traditional telephony grade copper conductors.
The enclosure can be used for interconnecting copper telephony conductors in VOIP applications without the need to re-run entire telephony inside wiring.
The enclosure can be mounted on most outdoor plant surfaces including poles and walls near existing telephony demarcation enclosures.
Within the enclosure are 4 brass posts with associated washers and nuts for terminating in-bound and out-bound copper pairs, which, if used, would allow for a means to separate the network from a station in test access situations.
The enclosure can also be used as a convenient location to repair copper conductors using standard discrete copper connectors.
The unit is designed with 2 entry ports at the unit’s base for in-bound and out-bound cabling and ground wire insertion.
The cover and base are hinged and can be secured via the molded in cover and base loop located on the right hand side.
Multilink’s Installation & Construction Catalog
SECTIO
N 5
PLA
STIC D
EMA
RC
ATIO
N EN
CLO
SUR
ERS
41
SPLICE CLOSURESML-210 Telephony Demarcation EnclosureIdeal for terminating phone drops in cable VOIP installations
Features• Wall or pole mountable• Integrated security features• Hinged cover for ease in access• Corrosion and weatherproof for outdoor applications• Impact resistant and UV resistant for maximum field survivability
Part# Description Dimensions UOM
020-023-10 ML-210 Telephony Demarcation Enclosure 3.24” W x 5” H x 2.5” D Each
020-001-20 NID Box, 2 Pair, Drop Distribution Terminal 3.24” W x 5” H x 2.5” D Each
Standard color is Gray
BenefitsThe Multilink ML-210 series telephony demarcation enclosure is a weatherproof outdoor product designed to allow for the interconnection or repair of traditional telephony grade copper conductors.
The enclosure can be used for interconnecting copper telephony conductors in VOIP applications without the need to re-run entire telephony inside wiring.
The enclosures can be mounted on most outdoor plant surfaces including poles and walls near existing telephony demarcation enclosures.
Within the enclosure are 4 3M Scotchlok™ UR2 connectors for 2-or-3 wire solid copper conductor combinations of 19-26 AWG for terminating in-bound and out-bound copper pairs, which, if used, would allow for a means to separate the network from a station in test-access situations.
The enclosure can also be used as a convenient location to repair copper conductors using standard discrete copper connectors.
The unit is designed with 2 entry ports at the unit’s base for in-bound and out-bound cabling and ground wire insertion.
The cover and base are hinged and can be secured via the molded in cover and base loop located on the right hand side.
Also available in 4 pair and 6 pair terminating as well as a brass grounding paste with associated washers and nuts.
Multilink’s Installation & Construction Catalog
SEC
TIO
N 5
PLA
STIC
DEM
AR
CA
TIO
N E
NC
LOSU
RER
S
42
SPLICE CLOSURESML-210 Telephony Demarcation EnclosureIdeal for terminating phone drops in cable VOIP installations
INSTRUCTIONS FOR SPLICING WITH UR2 CONNECTORS1. Locate the joint by twisting the wires one full turn2. Clip wire ends evenly a minimum of 1 in (25 mm) in front of the twist DO NOT STRIP INSULATION3. Hold connector with button side down. Insert wires all the way into ports4. Crimp the button using a Scotchlok™ E-9 series tool. Depress all the way
Multilink’s Installation & Construction Catalog
SECTIO
N 5
PLA
STIC D
EMA
RC
ATIO
N EN
CLO
SUR
ERS
43
PLASTIC DEMARCATION ENCLOSURESRNI-3800 Single Door Plastic Demarcation Enclosure
Stock ID Description Dimensions Weight Lbs. UOM
10-8609 RNI-3800 Single Door Plastic Demarcation Enclosure withLocking Terminator. Optional Plywood backing available.
11.95”H x10”W x 5.25”D 18/Case 10/Case
Features & Benefits• Dual locking system.• Removable cover.• Plywood Optional.• UV stabilized plastic can be painted with Latex paint.• Countersunk mounting holes for easy mounting on uneven surfaces like aluminum or vinyl siding.• Standard color is Gray.• Custom Logos/Imprints. Injection molded available.
Louvers are designed into cover to look like vents on the side of homes
Custom logo available and molded into plastic
Locking Terminator
Locking hole for cable lock or wires
B
A
C
Multilink’s Installation & Construction Catalog44
SEC
TIO
N 5
PLA
STIC
DEM
AR
CA
TIO
N E
NC
LOSU
RER
S
PLASTIC DEMARCATION ENCLOSURESRNI-3900 Single Door Plastic Demarcation Enclosure
Stock ID Description Dimensions Weight Lbs. UOM
10-9899 RNI-3900 Single Door Plastic Demarcation Enclosure withLocking Terminator. Optional Plywood backing available
12.125”H x 9.704”W x 3.501”D 18/Case 10/Case
Features & Benefits• Dual locking system• Removable cover• Plywood Optional• UV stabilized plastic can be painted with Latex paint• Countersunk mounting holes for easy mounting on uneven surfaces like aluminum or vinyl siding• Standard color is Gray• Custom Logos/Imprints• Injection molded available
B
A
C
Multilink’s Installation & Construction Catalog 45
SECTIO
N 5
PLA
STIC D
EMA
RC
ATIO
N EN
CLO
SUR
ERS
PLASTIC DEMARCATION ENCLOSURESMultimedia Single Door Plastic Demarcation Enclosure
Stock ID Description Dimensions Weight Lbs. UOM
30617K RNI-3600 Single Door Plastic Demarcation Enclosure withLocking Terminator
10”W x 10”H x 3.22”D 18/Case 10/Case
30619K RNI-3600-SR Single Door Plastic Demarcation Enclosure withLocking Terminator - Special Resistance Material
10”W x 10”H x 3.22”D 18/Case 10/Case
30615K RNI-3600-TS Single Door Plastic Demarcation Enclosure withLocking Terminator - Special Resistance Material
10”W x 10”H x 3.22”D 18/Case 10/Case
10-6008 66 Punch Down Block - 50 Pair 10”A x 10”B x 3.2187”C 18/Case Each
10-6009 66 “Mini” Punch Down Block - 6 Pair - - Each
163 2 Pair Terminal With Ground Plastic Demarcation Enclosure - 0.5 Each
Features & Benefits• Dual locking system• Removable cover• Plywood Optional• UV stabilized plastic can be painted with Latex paint• Countersunk mounting holes for easy mounting on uneven surfaces like aluminum or vinyl siding• Standard color is Gray• Custom Logos/Imprints• Injection molded available
B
A
C
Multilink’s Installation & Construction Catalog46
SEC
TIO
N 5
PLA
STIC
DEM
AR
CA
TIO
N E
NC
LOSU
RER
S
PLASTIC DEMARCATION ENCLOSURESMultimedia Double Door Plastic Demarcation Enclosure
Stock ID Description Dimensions Weight Lbs. UOM
30652K RNI-3620 Double Door Plastic Demarcation Enclosure OD 17.25”L x 11.25”W x 3.875”DID: 16”L x 10”W x 3.22”D
CAD: 6”L x 11.25”W x 3.875”D
36/Case 10/Case
30659K RNI-3620 Double Door Plastic Demarcation EnclosureSpecial Resistance Material
OD 17.25”L x 11.25”W x 3.875”DID: 16”L x 10”W x 3.22”D
CAD: 6”L x 11.25”W x 3.875”D
36/Case 10/Case
Exterior Features• Weatherized UV stabilized plastic for the ultimate protection against the elements• Dual locking system• UV stabilized plastic can be painted with Latex paint• Countersunk mounting holes for easy mounting on uneven surfaces like aluminum or vinyl siding• Can be wall mounted or on a pedestal stake• Standard color is Gray• Custom Logos/Imprints. Injection molded available
Interior Features• Both plastic dividers can be removed for increased versatility• The removable plastic insert plate has 2 knockouts for F-81 hex holes and an open end hex hole in the center of plate for an F-81
Multilink’s Installation & Construction Catalog 47
SECTIO
N 5
PLA
STIC D
EMA
RC
ATIO
N EN
CLO
SUR
ERS
PLASTIC DEMARCATION ENCLOSURESRNI-3615 Double Door Plastic Demarcation Enclosure
Stock ID Description Dimensions UOM
30632K RNI-3615 Double Door Plastic Demarcation Enclosure 8”B x 14”A x 3.5”C 10/Case
30631K RNI-3615-SR Double Door Plastic Demarcation Enclosure Special Resistance Material (Not Pictured)
8”B x 14”A x 3.5”C 10/Case
10-6008 66 Punch Down Block - 50 Pair - Each
10-6009 66 “Mini” Punch Down Block - 6 Pair - Each
Features & Benefits• Dual door access and locking• Removable cover• Countersunk mounting holes for easy mounting on uneven surfaces like aluminum or vinyl siding• Custom injected molded logo available• Weatherized UV stabilized plastic for the ultimate protection against the element• Enclosure can be painted with Latex paint• Unique ribbed backing built into the enclosure for easy mounting of equipment anywhere on the pattern• Removable plastic divider for increased versatility• Plywood optional.• Special resistance material available upon request (see below), includes 15 year pro-rated warranty• Standard color is gray
B
AC
Multilink’s Installation & Construction Catalog48
SEC
TIO
N 5
PLA
STIC
DEM
AR
CA
TIO
N E
NC
LOSU
RER
S
PLASTIC DEMARCATION ENCLOSURESRNI-5211 Single Dwelling VoicePort Plastic Demarcation Enclosure
Stock ID Description Dimensions Weight Lbs. UOM
30661K RNI-5211 Single Dwelling Voice Port Enclosure 20”H x 9.5”W x 4.5”D - 10/Case
30665K RNI-5212 Single Dwelling Voice Port Enclosure( w/screen and mounting hardware included )
20”H x 9.5”W x 4.5”D - 10/Case
Features & Benefits• Flexible mounting backing• Enlarged capacity for voice part and passive devices• Dual door locking system• Removable doors• Plywood optional• Can be wall mounted, pole mounted, or pedestal stake mounted• Standard color is light gray• Custom Logos/Imprints. Injection molded available• Flame retardant materials are available• Standard color is gray• Please call Customer Service for more information and a part number
B
A
C
Multilink’s Installation & Construction Catalog 49
SECTIO
N 5
PLA
STIC D
EMA
RC
ATIO
N EN
CLO
SUR
ERS
Stock ID Description Dimensions Weight Lbs. UOM
30211K-T SDU-9134 Set up with replaceable hasp and locking terminator security post
13”L x 9”W x 4”H 19/Case 10/Case
30222K SDU-9134 Set up with replaceable hasp and locking terminator security post - Features Deep Lid
13”L x 9”W x 5”H 16 /Case 8/Case
- SDU-9134 features tamper proof screws - - 10/Case
The SDU is more than a plastic enclosure. The innovative, NON CAPTIVE designspeeds the upgrade installation timeof installing a new demarcationenclosure without disconnecting thecustomer’s service!
Features & Benefits• Guard Tower locking terminator• Replaceable Hasp• Custom Logos/Imprints• Injection molded available• Standard color is gray
PLASTIC DEMARCATION ENCLOSURESSDU9134 (Single Dwelling Unit)Non-Captive Plastic Demarcation Enclosure
B
AC
Multilink’s Installation & Construction Catalog50
SEC
TIO
N 5
PLA
STIC
DEM
AR
CA
TIO
N E
NC
LOSU
RER
S
Stock ID Description Dimensions Weight Lbs. UOM
30125K CC-1/JR-T Set Up for Locking Terminator Use 7.375”H x 4.75”W x 1.625”D - 50/Case
30166 CC-1/JR-TS Star Tamper Proof Screw 7.375”H x 4.75”W x 1.625”D - 50/Case
30105K CC-1/DWB-T 9.5”H x 6.5”W x 3.75”D - 50/Case
30306K CC-1/DWB-TX “X” Back 9.5”H x 6.5”W x 3.75”D - 30/Case
30307K CC-1/DWB-TS Tamper Proof Screw 9.5”H x 6.5”W x 3.75”D - 30/Case
30155K CC-1/110-T Set Up for Locking Terminator Use 11”H x 7”W x 4.25”D - 30/Case
30413 CC-1/110-TS Star Tamper Proof Insert 11”H x 7”W x 4.25”D - 30/Case
30412K CC-1/100-T Set Up for Locking Terminator Use-Low Profile Cover 11”H x 7”W x 2.5”D - 36/Case
30411 CC-1/100-TS Star Tamper Proof Insert 11”H x 7”W x 2.5”D - 36/Case
31430 C-1/H Hasp for CC-1 Enclosure - - Each
31701 578-RTO Riser Tubing .5”ID x .875”OD x 6’ - 50/Case
31702 578-MS New Slit Back Snap-On Style Riser Tubing-Gray .875 - 50/Case
31708 578-MS1 Mounting Strap for Riser Tubing 1” - 50/Case
31705 578-RT Solid Wall Riser Tubing-Gray .5”ID x .875”OD x 6’ - 50/Case
31709 578-RT1 Solid Wall Riser Tubing-Gray .875”ID x 1”OD x 6’ - 50/Case
31440 C-1PC Terminator Cap for CC-1 Enclosures-Gray - - 50/Case
33200 8480 #8 x 1” Hex Screw - - 1,000/Pack
30661K RNI-5211 Single Dwelling Voice Port Enclosure 20”H x 9.5”W x 4.5”D - 10/Case
30665K RNI-5212 Single Dwelling Voice Port Enclosure( w/screen and mounting hardware included )
20”H x 9.5”W x 4.5”D - 10/Case
• Shown with optional back mounting plate for brick mortar joint align mount• Available on some model demarcation enclosures• Can be securely locked with a locking terminator or tamper-proof screw, like Star or Diversified for example
Features & Benefits• Dual locking system• Guard Tower locking terminator• Replaceable hasp• Custom Logos/Imprints• Injection Molded available• Have it your way, we customize to your application!
Patent #331-740
B
CA
PLASTIC DEMARCATION ENCLOSURESNon-Captive Plastic Demarcation EnclosureCC-1/JR, CC-1/DWB, and CC-1/110-T
Multilink’s Installation & Construction Catalog 51
SECTIO
N 5
PLA
STIC D
EMA
RC
ATIO
N EN
CLO
SUR
ERS
PLASTIC DEMARCATION ENCLOSURESAccessories and Mounting Hardware
Stock ID Description Dimensions Weight Lbs. UOM
A 1000-A Plastic Security Enclosure-Gray 4.875” x 2” - Each
B 1100-B Plastic Security Enclosure-Gray 4.875” x 3.5” - Each
C C-1/H Hasp for CC-1 Enclosures - 50/Case
D 578-RTO Slit Back Snap-On Style Riser Tubing .5” ID x .875” OD x 6’ - 50/Case
E 578-MS Mounting Strap for Riser Tubing .875” - 50/Case
F 578-MS 1 Mounting Strap for Riser Tubing 1” - 50/Case
Features & Benefits• Dresses up drops• Protects passives from elements• Pre-wiring drops
The 1000 Series Security Enclosures
Replacement HaspFor CC-1 Enclosures
Riser TubingProtect drop cable
from weed eaters and environmental damage with
solid wall riser tubing
Mounting StrapFor Riser Tubing
A B
C E & FD
Multilink’s Installation & Construction Catalog52
SEC
TIO
N 6
SEC
UR
ITY
SEA
LS &
DR
OP
IN
STA
LLA
TIO
N H
AR
DW
AR
E
SECURITY SEALSMULTITAG™ Tamper Resistant Security Seals For Audit Control
Exclusively manufactured by Multilink, Inc., which enables you to customize your tag anyway you want!
The Multilink, Inc. MULTITAG™ was designed with the installer’s problems and needs in mind. The uniquely patented design surrounds the cable with both the body and hasp, making the tag virtually tamperproof!
Standard Package is 100 pieces per bag
MT-LOCustom Logo
MT-AN7 Digit Alphanumerical w/Custom Name
MT-AL7 Digit Alphanumerical w/Custom Logo
Colors: Add number to end of MULTITAG™ number
MT-WNWriting Panel w/Custom Name
MT-WLWriting Panel w/Custom Logo
MT-NOCustom Name
Color # Color Color # Color Color # Color
01 Yellow 06 Black 12 Dk. Green
02 Orange 07 Red 13 Blue Green
03 Purple 09 Lt. Blue 14 Rose
04 Gold 10 Dk. Blue 15 Beige
05 White 11 Lt. Green
Multilink’s Installation & Construction Catalog 53
SECTIO
N 6
SECU
RIT
Y SEA
LS &D
RO
P IN
STALLA
TION
HA
RD
WA
RE
SECURITY SEALSMULTITAG™ Tamper Resistant Security Seals For Audit Control
Exclusively manufactured by Multilink, Inc., which enables you to customize your tag anyway you want!
The Multilink, Inc. MULTITAG™ was designed with the installer’s problems and needs in mind. The uniquely patented design surrounds the cable with both the body and hasp, making the tag virtually tamper proof!
Color # Color Color # Color Color # Color
01 Yellow 06 Black 12 Dk. Green
02 Orange 07 Red 13 Blue Green
03 Purple 09 Lt. Blue 14 Rose
04 Gold 10 Dk. Blue 15 Beige
05 White 11 Lt. Green
Standard Package is 100 pieces per bag
Colors: Add number to end of MULTITAG™ number
Bar Code your Multilink, Inc. MULTITAG™ and get a second set of bar codes to stick on the audit work sheet report!
MT-AO7 Digit, Alphanumerical
MT-WOWriting Panel
MT-LWLarge Writing Panel
MT-POPlain
MT-WAWriting Panel, w/7 Digit Alphanumerical
MT-BABar Code w/7 Digit Alphanumerical(Minimum Order of 5,000 pieces)
Multilink’s Installation & Construction Catalog54
SEC
TIO
N 6
SEC
UR
ITY
SEA
LS &
DR
OP
IN
STA
LLA
TIO
N H
AR
DW
AR
E
DROP INSTALLATION MATERIALS
New Plastic Horizontal and Vertical Siding Clips
Cable installers love this innovative design. Allows rapid, snap-on installation without special tools (only a screwdriver). No nails, no staples, no mess. These residential siding clips are trouble-free! The premium grade nylon lasts longer. Resists weather. Replacement call backs or complaints are virtually eliminated. The customers appreciate the safe and neat installation. No possible tool damage or punctures to siding. No rust or stain from nails or staples. No deterioration.
Figure Part# Description UOM
A 10-6050 Horizontal Sliding Clip Black 100/Bag
B 10-6051 Vertical Sliding Clip Black 100/Bag
A B
Part# Description UOM
10-6052 Single Feed-thru Bushing For RG-6 Black Each
10-6053 Single Feed-thru Bushing For RG-59 Black Each
649-022-12 Fiber Plug 3mm Each
FIBER PLUG®
Multilink Plastic Flush Wall Entry PlugWith Built-In Bend Radius SystemSingle Fed Thru Bushing
• Designed to meet the special requirements of the telecommunications industry• It provides unequaled holding power in less-than-perfect holes through many kinds of construction materials, including masonry walls• Each bushing has multiple reverse barbs which flex to fill the hole and secure themselves to prevent easy pull-out after insertion• The single strand bushing comes in both RG6 and RG9 sizes
Multilink’s Installation & Construction Catalog
SECTIO
N 6
SECU
RIT
Y SEA
LS &D
RO
P IN
STALLA
TION
HA
RD
WA
RE
55
DROP INSTALLATION MATERIALS
A - Tie Wraps B - Tree Guard C - Squirrel Guard
Squirrel Guard• Protect hard and drop cable from hungry squirrels and other pesky rodents with Multilink Squirrel Guard • Squirrel Guard is now available in two styles • Both the Green Flex and the Squirrel Guard Slinky are easy to install and will provide superior protection from rodent damage to your cable
Figure Part# Description Dimensions UOM
A 33500 IT18R 4” Black Tie Wraps W/ ID Plate 4” 100/Bag
- 33511 N-7-50-0-C 8” Tie Wraps 8” 100/Bag
- 33522 PLT4S-CO 14” UV Tie Wraps 14” 100/Bag
- 33533 T30L 14-1/2” Black Tie Wraps 30# Std. 14.5” 100/Bag
B 24304 74323-TG Tree Guard Black .5” x 6’ 150/Carton
- 24314 73433-TG Tree Guard Black 1” x 6’ 60/Carton
- 24324 73435-TG Tree Guard Black 1.5” x 6’ 28/Carton
- 24334 73437-TG Tree Guard Black 2” x 6’ 20/Carton
C 24503 7003-SGJ Green Flex For RG6 & RG59 - 100/Carton
- 24514 73435-SGT Green Flex 1.5” x 6’ 75/Carton
- 24523 73433-SGT Green Flex 1” x 6’ 75/Carton
- 24512 73435-SGT Green Flex 1.5” x 100 100/Carton
- 73431 73431-SGT Green Flex 0.4310” x 6’ 75/Carton
Multilink’s Installation & Construction Catalog56
SEC
TIO
N 6
SEC
UR
ITY
SEA
LS &
DR
OP
IN
STA
LLA
TIO
N H
AR
DW
AR
E
Features & Benefits• Lower inventory types, only two part numbers to stock• Complete assembly - includes fastening screw (for surface mount)• Fits all standard coaxial and twisted pair drop cables• Ready for cable installation with an included outdoor tie wrap• Vertical or horizontal mount for siding applicationsSpecial Features• Run additional cable/phone lines without installing additional clips
US Patent 6,378,814B1
Figure Part# Description UOM
A 33625K CSM-6 Surface Mounting Clip Black 100/Case
- 33626K CHV-6W Siding Clip White 100/Case
B 33627K CHV-6B Siding Clip Black 100/Case
Surface Mounting Clip Siding Clip
Horizontal Application Add Twisted PairVertical Application
• The Smart Clip replaces all the surface mounting clips and siding clips you are now using for cable installation on the side of homes• Cut inventory from 20 line items to 2 line items• There are only two Smart Clips, a surface mount clip and a siding clip• They use detachable or multi-detachable tie wraps, eliminating the need for multiple sizes of clips• Smart Clips can be used horizontally or vertically
DROP INSTALLATION MATERIALSSmart Clips Surface Mount/Siding Clips / The All-In-One Cable Clip !
Multilink’s Installation & Construction Catalog 57
SECTIO
N 6
SECU
RIT
Y SEA
LS &D
RO
P IN
STALLA
TION
HA
RD
WA
RE
DROP INSTALLATION MATERIALSPlastic & Steel Cable Clips The Screw-In Clips for 6/59 or 7/11 Cable
Figure Part# Description Dimensions UOM
A 10-9980 625-RG11 Plastic Strap & Screw For RG11 For 0.393” - 0.405” Diameter Cable 100/Bag
B 33535K 620-RG6QS Plastic Strap & Screw For RG6 For 0.272” - 0.300” Diameter Cable 100/Bag
- 33539K 625-RG6DS Plastic Strap With Drill & Tap Screw For 0.272” - 0.300” Diameter Cable 100/Bag
A B
Features & Benefits• Clips secure to either 6/59 or 7/11 series cables without limiting transmission signal bandwidth• UV stabilized Xenoy® clip body has a temperature range of -50°F to 300°F. No cracking, splitting, or chipping • Smooth, rounded edges of clip bodies will not cut or abrade cable shielding, eliminating a cause of signal leakage• Screws are specially hardened, plated, and treated to withstand 1,000 hours of corrosive salt spray testing per ASTM B 117
Multilink’s Installation & Construction Catalog58
Figure Part# Description UOM
A 33717 WPIH - Ivory, Hex Hole In Front Each
B 33727 WPIK - Ivory, Dual Knockouts Each
C 33745 WPICT - Dual Combination Coax/phone Each
D 33737 WPID - Ivory, Dual Hex Holes In Front Each
E 33747 WPIL - Ivory, 5/8” Round Center Hole Each
F 33767 WPIH/81 - Ivory, F-81 Each
G 33757 WPIO - Ivory, Off set Hex Holes In Front Each
H 33787 WPIR - Ivory, Round Hole Each
I 33769 WPID/81 - Ivory, Dual Hole Each
- - WPIB - Ivory, Blank Each
DROP INSTALLATION MATERIALSWall Plates High Impact Plastic, Complete with Mounting Screws
A - WPIHIvory, Hex Hole in Front
B - WPIKIvory, Dual Knockouts
C - WPICTDual Combination Coax/Phone
D - WPIDIvory, Dual Hex Holes in Front
E - WPILIvory, 5/8” Round Center Hole
F - WPIH/81Ivory, F-81
G - WPIOIvory, Off set Hex Holes in Front
H - WPIRIvory, Round Hole
I - WPID/81Ivory, Dual Hole
Standard Packaging: 50/box, 1,000 pieces/carton for all sizesSpecial Order: Available in Brown & White on special order onlyCustom Lasered Logos Available
SEC
TIO
N 6
SEC
UR
ITY
SEA
LS &
DR
OP
IN
STA
LLA
TIO
N H
AR
DW
AR
E
Multilink’s Installation & Construction Catalog
DROP INSTALLATION MATERIALSSurface Mount Junction Boxes & Face Plates
Figure Part# Description Dimensions Weight Lbs. UOM
A 99580K MJB-1-I Ivory Single Gang Surface Mount Box 3.25” x 5” x 2” 0.20 LBS Each
- 99581K MJB-1-WH White Single Gang Surface Mount Box 3.25” x 5” x 2” 0.20 LBS Each
- 99584K MJB-1-OW Off White Single Gang Surface Mount Box 3.25” x 5” x 2” 0.20 LBS Each
B 99582K MJB-2-I Ivory Double Gang Surface Mount Box 5” x 5.25” x 2” 0.25 LBS Each
- 99583K MJB-2-WH White Double Gang Surface Mount Box 5” x 5.25” x 2” 0.25 LBS Each
Figure Part# Description Dimensions UOM
C 84512-SWB 2 Piece Wall Plate Box 4.5” x 2.5” x 1” Each
D 84430-SWB Wall Plate Box/Junction Box With Full Backing 4.5” x 2.5” x 1” Each
E 84421-SWB Wall Plate Box/Junction Box 4.5” x 2.5” x 1” Each
A B
C D EThis 2-piece wall plate box offers 4 knockout entry holes which are ideal for a 4-way junction box. The 2-piece wall box can easily be mounted to an uneven surface.
This wall plate box with a back has the same features as the 84421-SWB along with a full backing and a 2 stage knockout with 1/2” ID and 1” OD. Also four mounting holes and two knockouts on each side.
Installing directional taps and passive equipment on hard concrete walls or areas where there are no outlet holes can be a problem without the use of a junction box.
59
SECTIO
N 6
SECU
RIT
Y SEA
LS &D
RO
P IN
STALLA
TION
HA
RD
WA
RE
Multilink’s Installation & Construction Catalog60
DROP INSTALLATION MATERIALSWall Plates
Protruding and Recessed Wall Plates High Impact PlasticUnique protrusion and indentation protects cable wiring and connectors from contact with furniture, TV, and other household appliances that are routinely placed close to the wall.
Features & Benefits• Perfectly suited for both CATV and LAN applications• Recommended for residential and institutional application• Perfect for college dorm rooms, offices, and in the home• Protect your investment and avoid costly repair calls• Can be customized to fit any size connector or cable
Figure Part# Description UOM
A WP-2SP-XX Protruding Wall Plate W/ Dual Knockouts Each
B WP-1SR-XX Recessed Wall Plate Each
C SWWICT Ivory Protruding Wall Plate For Mod Jack And F81 Each
- SWWWCT White Protruding Wall Plate For Mode Jack And F81 Each
Wall Plate Mounting Brackets For Construction Applications
Figure Part# Description UOM
D 33700 MP1 Wall Plate Mounting Bracket 100/Box
E 33702 MPLS Wall Plate Mounting Bracket 100/Box
A B C C
D E
SEC
TIO
N 6
SEC
UR
ITY
SEA
LS &
DR
OP
IN
STA
LLA
TIO
N H
AR
DW
AR
E
Multilink’s Installation & Construction Catalog 61
DROP SPLICE HARDWARESplice Kits
Gelseal™ Splice Kit Re-Enterable
Test Test Conditions
Environmental Cycling -40°C to 60°C; 3 cycles/day; 100 cycles
Heat Aging 60°C; 30 days
Water Immersion Room temperature for 30 days; 2 foot water head
Freeze-Thaw Cycling -40°C to 60°C; 2 cycles per day; 1000 cycles
Slat Fog Per ASTM B-368; 30 days
Soil Chemical Resistance 30 day immersion in: 0.1N Na2SO40.1N H2SO40.1N NaCL0.1 NaOH
••••
Fungus Resistance Per ASTM G-21
• One size fits all RG6/59 or RG7/11 drop cable and 2-6 twisted pair phones lines• Reduces your inventory• Stock one size for direct burial underground splices
Mechanical SpecificationsSplices protected when direct buried and exposed to temperature ranges of -40°F to 140°F.
Gelseal™ Re-Enterable
3614-GS Shown with Coaxial & Twisted Pair
SECTIO
N 6
SECU
RIT
Y SEA
LS &D
RO
P IN
STALLA
TION
HA
RD
WA
RE
Multilink’s Installation & Construction Catalog62
A B C D E
Figure Part# Description Dimensions UOM
- 34120K-OR 3610-GS For RG6/59 Drop Cable Twisted Pair Orange Kit 4”L x 1”W x 1.5”H Each
A 34120K 3610-GS For RG6/59 Drop Cable Twisted Pair Black Kit 4”L x 1”W x 1.5”H Each
B 34122K-OR 3611-GS For RG7/11 Drop Cable Twisted Pair Orange Kit 7.75”L x 1.5”W x 1.75”H Each
C 34123K-OR 3612-GS Splice Repair Kit For 0.412 - 0.750 Feeder Cable Black Kit 12”L x 2.25”W x 3.5”D Each
D 34145K 3614-GS Multi Gelseal™ Splice Orange Kit 6”L x 2”W x 1”D Each
E 10-8342 3612-GS For RG59, RG6, RG7, RG11 and 312 Drop Cable Twisted Pair Black Kit 4.25”L x 2.375”W x 1.5”H Each
3615-GS Gelseal™ Re-EnterableGeneral Product Information• Multilink’s 3615-GS Gelseal™ is designed for splicing for 2-14 gauge wire in underground, direct buried and aerial applications• Additional single cable Re-enterable Gelseal™ units for drop cable twisted pair and feeder cable are available• Please contact Customer Service for more informationDielectric Properties• 500V per mil thickness of gel
3615-GS closed
Part# Description Dimensions UOM
34121K 3615 Plastic Power Splice Full W/ DSR2 Connector Black Kit 4.25”L x 2.375”W x 1.5”H Each
34118K 3615-GS Plastic Power Splice W/out Connector 4.25”L x 2.375”W x 1.5”H Each
DROP SPLICE HARDWARE
Gelseal™ Splice Kit Re-Enterable
SEC
TIO
N 6
SEC
UR
ITY
SEA
LS &
DR
OP
IN
STA
LLA
TIO
N H
AR
DW
AR
E
Multilink’s Installation & Construction Catalog
HARDLINE SPLICE REPAIR
A - CC-16 Dri-Splice
Features & BenefitsKeep your underground splices dry with the CC-16 Dri-Splice. The simple design consists of a PVC body with rubber seals on each end. The drop cable is simply placed through each rubber seal and the seals are then pushed onto the plastic body to form a secure, watertight seal. For RG6/59 only. Individually Packaged.
B - 4422-UDSP Splice Sealant B - Splice Sealant Bulk Pack
100% Underground Drop Sealant PadsGuaranteed for 20 Years!The Fastest and Easiest Underground Drop Repair Splice in the World!
Figure Part# Description Dimensions UOM
A 34500K CC-16 Dri-Splice 4”L x 1.1875”D Each
B 34401K 4425-UDSP Splice Sealant Individual Pads .125” x 3.75” x 2” 50/Bag
B 34403K 4422-UDSP Splice Sealant Individual Pads .125” x 3.375” x 2” 1/Bag
B 34402K 4421-UDSP Splice Sealant Individual Pads For RG6/59 Cable - 1/Bag
63
SECTIO
N 6
SECU
RIT
Y SEA
LS &D
RO
P IN
STALLA
TION
HA
RD
WA
RE
Multilink’s Installation & Construction Catalog64
Figure Part# Description Dimensions UOM
A 34201K 12615-CR Potting Kit - Each
B 34300K 4000-DT Dri-Tap For 0.500 Cable 6.5” Diameter Each
B 34301K 4750-DT Dri-Tap For 0.750 Cable 6.5” Diameter Each
B 34302 4024-RT Replacement Bag 6.5” x 28” Each
Features & Benefits• Installs on existing plant connections without having to undo the connections• Stops incursion of water• Stops corrosion• Re-enterable• Reliable• Complete kit includes potting bag and 1,500 grams of encaspulant
Features & Benefits• The Dri-Tap is constructed of many field-tested, top grade materials, which have been in service in cable systems for many years with 100% service ability• The Dri-Tap bag is made of double polished clear vinyl PVC, temperature rated from 180°F to -20°F• The base is made of ABS plastic and the rubber grommet and bands are made from neoprene rubber with a built in ozone retardant• The carriage bolt and T-Bolt band chain are made of 100% stainless steel for many years of service and reliability• The Dri-Tap is designed for flush grade installations in vaults where water tables, rain, and snow falls can fill up vaults and flood out passives • The rubber grommet holds up to eight RG6 drop cables for installation with taps and passives• Unlike the hard clear or green dome style underground housings, the Dri-Tap uses the clear poly bag design to squeeze the moisture and air out of the housing
Dri-TapFor Broadband and Telephony Applications
A
B
HARDLINE SPLICE REPAIR
The 12615-CR KitRe-Enterable Directional Tap & Directional Coupler Urethane Potting Kit
SEC
TIO
N 6
SEC
UR
ITY
SEA
LS &
DR
OP
IN
STA
LLA
TIO
N H
AR
DW
AR
E
Multilink’s Installation & Construction Catalog
PREP TOOLS
Fiber Prep CleanerHigh Gel Re-Enterable Encapsulant
Features & Benefits• Stop incursion of water/moisture• Resistant to high alkaline soil• Installs in just 15 minutes• Five times as reliable as heat shrink or mechanical devices• Kit comes complete with rigid clear plastic body, two adjustable end caps, and 750g of encapsulant• Hole on the adjustable end cap is sized for 0.412” - 0.500” cables• Cut cap back as needed for larger size cable 0.625” - 1.00”• 15 Year Pro-Rated Warranty
• Multilink’s F-Seal was developed to maintain an internal seal against signal leakage from F-Connectors• And no matter what brand of connector you are using, you must be able to seal the internal threads against the incursion of moisture, pollution, and other unpredictable weather conditions• With a single drop of F-Seal on the thread port you will be able to maintain a more secure and a longer lasting seal than with silicone grease (Please note that the signal contact is made with the F-Connector post and not the threads)• F-Seal is especially compounded to remain permanently elastic, even under extreme weather conditions• F-Seal works effectively in temperatures ranging from -40°F to 400°F. Along with Multilink’s Torque Wrench and a simple Weather Boot, you can ensure that you have the best seal possible at the absolute lowest cost • F-Seal already has a proven track record that literally goes above and beyond the Cable TV industry standard• F-Seal is derived from a compound that was used on the Space Shuttle to seal fittings, which proves that it can certainly meet any earthbound standard!• Note: All above come with twist cap and squeezable bottle
Figure Part# Description Dimensions UOM
A 34200K 126-CR Potting Kit 12” Each
B 38220K 5520-FS F-Seal 2 Fl Oz Each
- 38260K 5560-FS F-Seal 4 Fl Oz Each
- 38270K 5570-FS F-Seal 8 Fl Oz Each
Features & Benefits• Teflon filled thread sealing• High temperature resistance• Non-galling, non-seizing, and non-toxic• Extreme resistance to rust and corrosion • Non-corrosive to metals• Non-staining
B
A
F-SealThread Sealant
65
SECTIO
N 6
SECU
RIT
Y SEA
LS &D
RO
P IN
STALLA
TION
HA
RD
WA
RE
Multilink’s Installation & Construction Catalog66
PLASTIC & STEEL INSTALLATION PRODUCTSSECTION 7
Architectural and decorative Molding/Raceway Systems forinterior and exterior installation of broadband wires.
Molding and Raceway System manufacturing up to 1” bendradius to meet the growing needs of fiber installations.
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog 67
A Great Way To Display Multilink Architectural Raceway
Point-Of-Purchase Display Available From Multilink.Increase Awareness Of Your Raceway Products,
Call Customer Service For more Information.
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog68
Features• Large Capacity Raceway• Route Power and Communications Cabling Simultaneously• Aesthetically Pleasing Design• Meets TIA Minimum Requirements for Bend Radius• UL Listed
POWER RACEWAYArchitectural Multichannel 4”
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
Features and Benefits• Large Capacity Raceway• Route Power and Communications Cabling Simultaneously• Aesthetically Pleasing Design• Meets TIA Minimum Requirements for Bend Radius• Power Rated to 600V (UL)
Data Installation Power Installation
69
POWER RACEWAYArchitectural Multichannel 4”Power & Data Installation
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog70
MRM 400-XX-T Base and Cover MRM 400-XX-T Base and CoverMRF 400-D-XX DividerShown with one divider in center
MRM 400-XX-T Base and CoverMRF 400-D-XX DividerShown with two dividers
MRM 400-XX-T Base and CoverMRF 400-D-XX DividerShown with three dividers
MRM 400-XX-T Base and CoverMRF 400-D-XX DividerShown with one divider on the left side only
MRM 400-XX-T Base and CoverMRF 400-D-XX DividerShown with one divder on the right side only
POWER RACEWAYArchitectural Multichannel 4”6 different modular designs allow for greater flexibility in one raceway systemCategory 5, 5E and 6 1” Bend Radius Compliant
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog 71
RACEWAYMultilink Power Rated Raceway SystemCategory 5, 5E and 6 1” Bend Radius Compliant
Figure Part# Description Dimensions UOM
A MRM400-XX-T 4” Multichannel UL Listed Power Raceway Base And Cover Included 4.051”W x 1.75”H x 8’L 64’ /Ctn
B MRM400-C-XX 4” Multichannel Raceway Cover Only 2.75”W x8’L 64’ /Ctn
C MRM400-D-XX 4” Universal Divider For 4” Multichannel Raceway 1.55”H x 8’L 64’ /Ctn
D MRF400-PB-XX Power Box For 4” Multichannel Raceway 4”L x 2”W x 1-3/8”D Each
E MRF400-DB-XX Data Box For 4” Multichannel Raceway 4”L x 2”W x 3/4”W Each
F MRF400-FER-XX Flat Elbow For 4” Multichannel Raceway 4” Each
Standard colors are Ivory, White and Office White. Replace XX with I, W or OW for color designationCustom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings). Call Customer Service for more information
Base & Cover sold together
A B C
D E F SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog72
RACEWAYMultilink Power Rated Raceway SystemCategory 5, 5E and 6 1” Bend Radius CompliantPower Raceway Fittings
Figure Part# Description Dimensions Weight UOM
A MRF400-ICR-XX Inside Corner For 4” Multichannel Raceway 4” 0.40 Lbs Each
B MRF400-EC-XX End Cap For 4” Multichannel Raceway 4” 0.10 Lbs Each
C MRF400-OCR-XX Outside Corner For 4” Multichannel Raceway 4” 0.45 Lbs Each
D MRF400-TBT-XX Transition Box For 4” Multichannel Raceway 4” 0.45 Lbs Each
E MRF400-WR-XX Wire Retainer For 4” Multichannel Raceway 4” 0.05 Lbs Each
F MRF400-JC-XX Joint Cover / Seam Cover For 4” Multichannel Raceway 4” 0.05 Lbs Each
Transitions to MRM17 Series Raceway
A B C
D E F
Standard colors are Ivory, White and Office White. Replace XX with I, W or OW for color designationCustom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings). Call Customer Service for more information
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog 73
RACEWAYArchitectural Wave Cove Raceway SystemsFast Mounting and Attractively Blends into the Ceiling
Features• Architectural Wave Cove Raceway holds category 5 cables to a 1” bend radius thus maintaining end to end connectivity, even when filled to capacity or pulled through the raceway • The Raceway is available with an adhesive back for fast and easy installation • Aesthetically blends with drop ceilings• Efficient for moves, adds and changes• No need to move furniture
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
RACEWAY Architectural Plastic Wave Molding For Interior Use Only6 different modular designs allow for greater flexibility in one raceway systemCategory 5, 5E and 6 1” Bend Radius Compliant
Standard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designationCustom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings)Call Customer Service for more information
A A B B
C C D E
Figure Part# Description Dimensions UOM
A 84125-W-XX Wave Molding 2.5” x 8’ 240’ /ctn
A 84125-W-AB-XX Wave W/ Adhesive Backing 2.5” x 8’ 240’ /ctn
A 84130-W-XX Wave Molding 2.75” x 8’ 160’ /ctn
A 84170-W-XX Wave Molding 3.5” x 8’ 64’ /ctn
A 84140-W-XX Wave Molding Fittings Must Be Miter Cut 4” x 8’ 96’ /ctn
B MCF25-IR-XX Inside Radius Fitting 2.5” Each
B 84125-IEW-XX Wave Inside Elbow 2.5” Each
B 84130-IEWL-XX Wave Inside Elbow 2.75” Each
B 84175-IEW-XX Wave Inside Elbow 3.5” Each
C MCF26-OR-XX Outside Radius Fitting 2.5” Each
C 84125-OEW-XX Wave Outside Elbow 2.5” Each
C 84130-OEWL-XX Wave Outside Elbow 2.75” Each
C 84175-OEW-XX Wave Outside Elbow 3.5” Each
D 84125-CW-XX Wave End Cap 2.75” Each
D 84130-CW-XX Wave End Cap 2.75” Each
D 84175-CW-XX Wave End Cap 3.5” Each
E MCF27-T-XX Tee Fitting 2.5” Each
- 84125-WH-XX Wave Hinge Molding 2.5” x 8’ 120’ / Ctn
- 84125-WH-AB-XX Wave Hinge Molding W/ Adhesive Backing 2.5” x 8’ 120’ / Ctn
Lance Option Available
74
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
Lance Option AvailableA
A B
C
D
E
Figure Part# Description Dimensions UOM
A 84108-VM-XX Cove Molding 2.0625” x 8’ 320’ / Ctn
A 84108-HVM-XX Hinged Cove Molding 2.0625” x 8’ 224’ / Ctn
A 84125-VM-XX Cove Molding 2.75” x 8’ 240’ / Ctn
B MCF25-IR-XX Inside Radius Fitting - Each
B 84106-IEVL-XX Cove Inside Elbow 2.0625” x 6” Each
B 84125-IEVL-XX Cove Inside Elbow 2.75” x 6” Each
C MCF26-OR-XX Outside Radius Fitting - Each
C 84107-OEVL-XX Cove Outer Elbow 2.0625” Each
C 84125-OEVL-XX Cove Outer Elbow 2.75” Each
D 84108-CV-XX Cove End Cap 2.0625” x 8” Each
D 84101-CV-XX Cove End Cap 1” x 8” Each
D 84125-CV-XX Cove End Cap 2.75” x 8” Each
E 84020-FDS-XX 2 Piece Finger Drop Splice With Adhesive Backing 8” x .5” Each
Standard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designation Custom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings)Call Customer Service for more information
75
RACEWAY Cove MoldingCategory 5, 5E and 6 1” Bend Radius Compliant
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog76
LATCH DUCT RACEWAY Architectural Latch Duct RacewayCategory 5, 5E and 6 1” Bend Radius Compliant - Available in our Standard Version
Features• Fast Mounting One Piece Design• Architectural MutiRaceway holds communication cables to a 1 inch bend radius, thus maintaining end to end connectivity even when filled to capacity or pulled through the raceway • The one piece design constructed of 94V-0 rigid vinyl features a highly flexible hinge and self-locking latch• This can be easily accessed as many times as necessary without stress cracking or discoloration UL Listed Material
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
Features & Benefits• The MRM Series Latch Duct Raceway is an adhesive backed, highly flexible, one piece design that installs quickly and easily• All fittings incorporate a minimum of 1” bend radius, thus maintaining end to end connectivity even when filled to capacity or pulled through raceway.
Figure Part# Description Dimensions Weight UOM
A MRM75-XX-T Pre-Adhesive Backed Latch Duct Raceway .75”W x .5”H x 6’L 9 Lbs / Ctn 120’ / Ctn
B MRM12-XX-T Pre-Adhesive Backed Latch Duct Raceway 1.25”W x .75”H x 6’L 23 Lbs / Ctn 120’ / Ctn
C MRM17-XX-T Pre-Adhesive Backed Latch Duct Raceway 1.75” x 1”H x 6’L 33 Lbs / Ctn 120’ / Ctn
77
Packed 120 ft. per cartonStandard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designationCustom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings)Call Customer Service for more information
A B C
A-C
LATCH DUCT RACEWAY Multilink Latch Duct MultiRacewayCategory 5, 5E and 6 1” Bend Radius Compliant
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
Features & Benefits• The MultiClear Raceway encompasses a flexible vinyl base to hold and secure cable • The cover can be removed without disrupting the cabling • This two piece design has a clear base and solid covers available in our standard raceway colors of Ivory, White, and Office White• The line is compatible with the fittings on the following pages
Figure Part# Description Dimensions Weight UOM
A MRC75-XX-T Pre-Adhesive Backed Latch Duct Raceway .75”W x .5”H x 6’L 17 Lbs / Ctn 120’ / Ctn
B MRC12-XX-T Pre-Adhesive Backed Latch Duct Raceway 1.25”W x .75”H x 6’L 32 Lbs / Ctn 120’ / Ctn
C MRC17-XX-T Pre-Adhesive Backed Latch Duct Raceway 1.75” x 1”H x 6’L 45 Lbs / Ctn 120’ / Ctn
Packed 120 ft. per cartonStandard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designationCustom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings)Call Customer Service for more information
78
A B C
A-C
RACEWAY MutliClear Surface RacewayCategory 5, 5E and 6 1” Bend Radius Compliant
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
Standard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designation
79
A B C D
E F G H
Figure Part# Description Dimensions Weight UOM
A MRF75-ICR-XX Inside Corner Fitting For MRM75 And MRC75 .75” 0.40 Lbs / Pk 10 / Pk
A MRF12-ICR-XX Inside Corner Fitting For MRM12 And MRC12 1.25” 0.60 Lbs / Pk 10 / Pk
A MRF17-ICR-XX Inside Corner Fitting For MRM17 And MRC17 1.754” 0.80 Lbs / Pk 10 / Pk
B MRF75-OCR-XX Outside Corner Fitting For MRM75 And MRC75 3/4” 0.50 Lbs / Pk 10 / Pk
B MRF12-OCR-XX Outside Corner Fitting For MRM12 And MRC12 1.254” 0.70 Lbs / Pk 10 / Pk
B MRF17-OCR-XX Outside Corner Fitting For MRM17 And MRC17 1-3/4” 1.00 Lbs / Pk 10 / Pk
C MRF75-FER-XX Flat Elbow Fitting For MRM75 And MRC75 .75” 0.60 Lbs / Pk 10 / Pk
C MRF12-FER-XX Flat Elbow Fitting For MRM12 And MRC12 1.25” 0.80 Lbs / Pk 10 / Pk
C MRF17-FER-XX Flat Elbow Fitting For MRM17 And MRC17 1.75” 1.00 Lbs / Pk 10 / Pk
D MRF75-TRT-XX Tee Fitting For MRM75 And MRC75 .75” 0.70 Lbs / Pk 10 /pk
D MRF12-TRT-XX Tee Fitting For MRM12 And MRC12 1.25” 1.00 Lbs / Pk 10 / Pk
D MRF17-TRT-XX Tee Fitting For MRM17 And MRC17 1.75” 1.30 Lbs / Pk 10 / Pk
E MRF75-JC-XX Joint Cover Fitting For MRM75 And MRC75 .75” 0.20 Lbs / Pk 10 / Pk
E MRF12-JC-XX Joint Cover Fitting For MRM12 And MRC12 1.25” 0.30 Lbs / Pk 10 / Pk
E MRF17-JC-XX Joint Cover Fitting For MRM17 And MRC17 1.75” 0.30 Lbs / Pk 10 / Pk
F MRF12-R75-XX Reducer Fitting (Reduces From 1.25” to .75”) 1.25” to .75” 0.40 Lbs / Pk 10 / Pk
F MRF17-R75-XX Reducer Fitting (Reduces From 1.75” to .75”) 1.75” to .75” 0.20 Lbs / Pk 10 / Pk
F MRF17-R12-XX Reducer Fitting (Reduces From 1.75” To 1.25”) 1.75” to 1.25” 0.30 Lbs / Pk 10 / Pk
G MRF75-EC-XX End Cap Fitting For MRM75 And MRC75 .75” 0.10 Lbs / Pk 10 / Pk
G MRF12-EC-XX End Cap Fitting For MRM12 And MRC12 1.25” 0.10 Lbs / Pk 10 / Pk
G MRF17-EC-XX End Cap Fitting For MRM17 And MRC17 1.75” 0.20 Lbs / Pk 10 / Pk
H MRF75-CE-XX Ceiling Entry Fitting For MRM75 And MRC75 .75” 0.30 Lbs / Pk 10 / Pk
H MRF12-CE-XX Ceiling Entry Fitting For MRM12 And MRC12 1.25” 0.40 Lbs / Pk 10 / Pk
H MRF17-CE-XX Ceiling Entry Fitting For MRM17 And MRC17 1.75” 0.50 Lbs / Pk 10 / Pk
RACEWAY Architectural Raceway Fittings for MRM & MRC Series MoldingCategory 5, 5E and 6 1” Bend Radius Compliant
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
Figure Part# Description Dimensions Weight UOM
A MRFUV-WE-XX Wall Entry Fitting For All Sizes Of MRM And MRC - 1.60 Lbs Each
B MJB-1-XX Single Gang Surface Mount Box 3.25” x 5” x 2” 0.20 Lbs Each
C MJB-2-XX Double Gang Surface Mount Box 5” x 5.25” x 2” 0.25 Lbs Each
D MWP-13-XX Single Gang Face Plate (3 Port Capacity) 2.75” x 4” x .5” 0.10 Lbs Each
E MWP-16-XX Single Gang Face Plate (6 Port Capacity) 2.75” x 4” x .5” 0.10 Lbs Each
Standard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designation
80
A
B C
D E
RACEWAY Architectural Raceway Fittings for MRM & MRC Series MoldingCategory 5, 5E and 6 1” Bend Radius Compliant
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog 81
RACEWAY Multilink Raceway Cross Reference ChartCategory 5, 5E and 6 1” Bend Radius Compliant
Multilink Description Panduit Part# Wiremold Part# Tyton Part# Dek Part#
MRM17 1.75" raceway; 6' L LD10 2900 TSR3-6A 042-LD00
MRF17-JC 1.75" seam or joint cover CF10 2906 TSR3-14 042-0015
MRF17-TRT (includes base & cover) 1.75" tee fitting TFC10 2915 TSR3-21-1 042-0021
MRF17-FER (includes base & cover) 1.75" elbow fitting RAFC10 2911 TSR3-25-1 042-0025
MRF17-OCR (includes base & cover) 1.75" outside corner OCFX10 2918 TSR3-29-1 042-0029
MRF17-ICR (includes base & cover) 1.75" inside corner ICFC10 2917 TSR3-33-1 042-0033
MRF17-EC 1.75" end cap ECF10 2910B TSR3-36 042-0036
MRF17-R7 1.75" - 1.25" reducer RF10X5 2989A TSR1-12 042-0036H
MRF17-CE 1.75" ceiling drop DCF10 2986 TSR3-50 042-0050
MRM12 1.25" raceway; 6' L LD5 2800 TSR2-6A N/A
MRF12-JC 1.25" seam or joint cover CF5 2806 TSR2-14 N/A
MRF12-TRT (includes base & cover) 1.25" tee fitting TFC5 2815 TSR2-21-1 N/A
MRF12-FER (includes base & cover) 1.25" elbow fitting RAFC5 2811 TSR2-25-1 N/A
MRF12-OCR (includes base & cover) 1.25" outside corner OCFX5 2818 TSR2-29-1 N/A
MRF12-ICR (includes base & cover) 1.25" inside corner ICFC5 2817 TSR2-33-1 N/A
MRF12-EC 1.25" end cap ECF5 2810B TSR2-36 N/A
MRF12-R7 1.75" - .75" reducer RF10X3 2879A TSR2-12 N/A
MRF12-CE 1.25" ceiling drop DCF10 2886 TSR3-50 N/A
MRM75 .75" raceway; 6' L LD3 2700 TSR1-6A 043-LD00
MRF75-JC .75" seam or joint cover CF3 2706 TSR1-14 043-0015
MRF75-TRT (includes base & cover) .75" tee fitting TFC3 2715 TSR1-21-1 043-0021
MRF75-FER (includes base & cover) .75" elbow fitting RAFC3 2711 TSR1-25-1 043-0025
MRF75-OCR (includes base & cover) .75" outside corner OCFX3 2718 TSR1-29-1 043-0029
MRF75-ICR (includes base & cover) .75" inside corner ICFC3 2717 TSR1-33-1 043-0033
MRF75-EC .75" end cap ECF3 2710B TSR1-36 043-0036
MRF75-R7 1.25" - 3/4" reducer RF5X3 - TSR3-12 -
MRF75-CE .75" ceiling drop DCF13 2786 TSR1-50 043-0050
Power Raceway Systems
MRM400 (includes base and cover) 4" Multichannel; 8' L T70B 5400TB MCRX-B8 N/A
MRM400-C Cover for 4" raceway T70C 54000C MCRX-C N/A
MRM400-D Divider for 4" raceway T70D N/A MCRW-SD N/A
MRF400-DB Data Box for 4" raceway T70DB CM-EPLA MCRX-CDB N/A
MRF400-PB Power Box for 4" raceway T70HB 5450-T MCRX-EDB N/A
MRF400-FER Flat Elbow for 4" raceway T70RA 5411FO MCRX-FE N/A
MRF400-ICR Inside Corner 4" raceway T70IC 5417FO MCRX-IE N/A
MRF400-EC End Cap for 4" raceway T70EC 5410 MCRX-EC N/A
MRF400-OCR Outside Corner 4" raceway T70OCR 5418FO MCRX-EE N/A
MRF400-TBT Transition Box 4" raceway T70T 5415FO MCRX-TF N/A
MRF400-WR Wire Retainer 4" raceway T70WR 5400TWC MCRG-WR N/A
MRF400-JC Joint Cover 4" raceway T70BC 5406A MCRX-BS N/A
Not Needed Base Splice Cover T70CC 5406T MCRX-CS N/A
Call Customer Service if the style you are interested in is not listed
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog82
RACEWAY MRM Series Raceway Fill Chart
MRM 75 MRM12 MRM17
Wire Type Size Diameter 40% MAX 40% MAX 40% MAX
Coax RG6/U 0.27 1 2 4 8 9 16
RG59/U 0.242 1 2 5 10 12 20
RG62/U 0.242 1 2 5 10 12 20
RG58/U 0.193 3 5 9 15 18 30
Twisted Pair 2 pr 0.14 5 10 17 30 35 60
24 AWG 3 pr 0.15 4 8 15 25 31 50
Unshielded 4 pr 5E 0.217 2 4 7 12 14 25
4 pr 6 0.24 1 2 5 10 12 20
25 pr 0.41 0 1 2 4 4 7
Fiber Optic 2 strand 0.175 3 6 11 18 23 36
FA Jacket 4 strand 0.185 3 5 10 16 20 32
OFNP 6 strand 0.21 2 4 7 12 15 25
Electrical 14 AWG 0.105 7 10 14
12AWG 0.122 5 8 11
10AWG 0.153 3 5 6
40% - Column follows the guidelines of EIA/TIA for cable fill allowing for additions after installMAX - Marketing recommended maximum fill based on bend radius and internal cabling areaNote - UL material used in MRM series raceway manufacturingProduct not currently UL listed
MRM75 MRM12 MRM17
84125-W 84140-CR MRM400
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
Features & Benefits• These plates feature unique protrusion and indentation that protects cable/wiring and/or connectors from contact with furniture, TVs, or other household appliances that are routinely placed close to the wall• Perfectly suited for both CATV and LAN applications• Recommended for residential and institutional applications• Protect your investment and avoid costly repair calls• Perfect for college dorm rooms, offices, and in the home• Can be customized to fit any size connector or cable
Standard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designation
83
RACEWAY Protruding and Recessed Wall Plates High Impact Plastic
Figure Part# Description UOM
A WP-2SP-XX Protruding Wall Plate W/ Dual Knockouts Each
B WP-1SR-XX Recessed Wall Plate Each
C SWWICT Ivory Protruding Wall Plate For Mod Jack And F81 Each
- SWWWCT White Protruding Wall Plate For Mod Jack And F81 Each
D E F
Figure Part# Description Dimensions UOM
D 84512-SWB 2 Piece Wall Plate Box 4.5” x 2.5” x 1” Each
E 84430-SWB Wall Plate Box / Junction Box With Full Backing 4.5” x 2.5” x 1” Each
F 84412-SWB Wall Plate Box / Junction Box 4.5” x 2.5” x 1” Each
A B C C
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
Standard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designation
84
RACEWAY Ultra High Security Locking Molding 2-Piece Lock Molding3” bend radius meets coax drop cable return path bend radius standards
A B C D
E F G H
Figure Part# Description Dimensions UOM
A MRL20-XX Lock Molding Top/bottom Exterior Grade 2”W x .36”H x 8’L 160’ / Ctn
A MRL10-XX Lock Molding Top/bottom Exterior Grade .75”W x .18125”H x 8’L 360’ / Ctn
B MRF25-ICR-XX Inside Corner Fitting (Cover And Base Included) 2” Each
B MRF34-IC-XX Inside Corner Fitting (Cover Only) .75” Each
C MRF25-OCR-XX Outside Corner Fitting (Cover And Base Included) 2” Each
C MRF34-OCR-XX Outside Corner Fitting (Cover And Base Included) .75” Each
D MRF25-FER-XX Flat Elbow Fitting (Cover And Base Included) 2” Each
D MRF34-FER-XX Flat Elbow Fitting (Cover And Base Included) .75” Each
E MRF25-SC-XX Seam Cover Fitting 2” Each
E MRF34-SC-XX Seam Cover Fitting .75” Each
F MRF25-EC-XX End Cap Fitting 2” Each
F MRF34-EC-XX End Cap Fitting .75” Each
G MRF234-RD-XX Reducer Fitting 2” to .75” Each
H MRF25-TRT-XX Tee Fitting 2” Each
H MRF34-TRT-XX Tee Fitting .75” Each
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
Heavy Wall U Flanged Guard KH Molding
Figure Part# Description Dimensions UOM
A 86100-XRG 1” Heavy Wall U Flanged Guard Raceway 1” x 8’ 320’
A 86150-XRG 1.5” Heavy Wall U Flanged Guard Raceway 1.5” x 8’ 240’
A 86201-XRG 2” Heavy Wall U Flanged Guard Raceway 2” x 8’ 80’
B 84200-SQ Molding Cover Only 2” x 1” x 8’ 8’
B 84200-SQ Molding Base Only 2” x 1” x 8’ 8’
B 84220-SQ Molding Cover Only 2” x 2” x 8’ 8’
B 84220-SQ Molding Base Only 2” x 2” x 8’ 8’
B 84150-SQ Molding Cover Only 1.5” x 1” 8’
B 84150-SQ Molding Base Only 1.5” x 1” 8’
B 84300-SQ Ex Molding Cover Only 3” x 2” 8’
B 84300-SQ Ex Molding Base Only 3” x 2” 8’
A B
Available by special order only Available in Exterior Ivory
85
RACEWAY
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
Standard colors are Beige and WhiteReplace XX with B or W for color designation
86
A-B C D E
F G H I-J
Figure Part# Description Dimensions UOM
A 84180-HM-2-XX Flat Wave Hinge Molding 2” x 8” 144’ / Ctn
B 84180-CMA-XX Flat Wave Track Molding 2” x 8” 144’ / Ctn
C 84186-IEHM Inside Elbow Fitting 2” Each
D 84187-OEHM Outside Elbow Fitting 2” Each
E 84129-F45 45 Degree Corner Fitting 2” Each
F 84129-F50 50 Degree Corner Fitting 2” Each
G 84183-ECH End Cap Fitting 2” Each
H 84184-FEHM Flat Elbow Fitting 2” Each
I 84201-MB Mounting Bracket 2” x 6” Each
J 84200-MBL Full Length Backing 2” x 8” Each
RACEWAY Non-Metallic Architectural Flat Wave Hinged and Track Moldings
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog
Full Length Backing Track Molding Riser Guard And Mounting Strap
A B C
Figure Part# Description Dimensions UOM
A 84020-FLB-CM .5” Full Length Backing Plastic Track Molding .5”H x .5”W x 8’L 504’ / Ctn
- 84030-FLB-CM .84375” Full Length Backing Plastic Track Molding .84375”H x .875”W x 8’L 480’ / Ctn
- 84120-FLB-CM 1.25” Full Length Backing Plastic Track Molding 1.25”H x 1.3125”W x 8’L 364’ / Ctn
- 84020-CM-AB .5” Adhesive Back Full Length Backing Plastic Track Molding .5”H x .5”W x8’L 504’ / Ctn
- 84030-CM-AB .84375” Adhesive Back Full Length Backing Plastic Track Molding .84375” x .875”W x 8’L 480’/ Ctn
- 84120-CM-AB 1.25” Adhesive Back Full Length Backing Plastic Track Molding 1.25”H x 1.3125”W x 8’L 364’ / Ctn
B 84020-CM/RG .5” Riser Guard Molding .5” x .5”W x 8’L 504’ / Ctn
- 84030-CM/RG .84375” Riser Guard Molding .84375”H x .875”W x 8’L 480’ / Ctn
- 84120-CM/RG 1-1/4” Riser Guard Molding 1.25”H x 1.3125”W x 8’L 364’ / Ctn
- 84200-CM/RG 2” Riser Guard Molding 2”H x 2.5”W x 8’L 192’ / Ctn
- 84300-CM/RG 3.25” Riser Guard Molding 3.25”H x 3.25”W x 8’L 48’ / Ctn
C 84021-MS .5” Mounting Strap For Riser Guard Molding .546875”H x .5”W x 1.5”L Each
- 84031-MS .75” Mounting Strap For Riser Guard Molding .84375”H x 1.3125”W x 1.5”L Each
- 84121-MS 1.25” Mounting Strap For Riser Guard Molding 1.25”H x .875”W x 1.5”L Each
- 84201-MS 2” Mounting Strap For Riser Guard Molding 2”H x .625”W x 1.5”L Each
- 84301-MS 3” Mounting Strap For Riser Guard Molding 3.25”H x 3.25”W x 1.5”L Each
Custom colors available on molding for a minimum run of 3,000 ft. (500 pieces for fittings)Call Customer Service for more information
Features & Benefits• Full Length Backing Track Molding (also available with Adhesive Full Length Backing for interior use only) uses the same molding cover and fittings as the High Security Track Molding• The full length backing is easy to install on irregular or bumpy wall surfaces• Standard colors are beige, brown and brick red• Custom colors available with orders of 3,000 ft or more
Features & Benefits• Both the Riser Guard and Mounting Strap are made from UL Listed PVC materials• Two mounting straps for every four feet of riser guard are recommended • The mounting strap concept allows the installer to slide the strap into the position needed unlike any other riser guards in that it has the handy side flange that locks into one position• Like mounting brackets, the mounting straps allow the riser guard to expand and contract in changing weather conditions• Standard colors are beige, brown and brick red • Custom colors available with orders of 3,000 ft or more
87
RACEWAY
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog88
Figure Part# Description Dimensions UOM
A 84026-IE Inside Elbow Fitting For Flat Box Molding .5” Each
A 84036-IE Inside Elbow Fitting For Flat Box Molding .75” Each
A 84126-IE Inside Elbow Fitting For Flat Box Molding 1.25” Each
A 84206-IE Inside Elbow Fitting For Flat Box Molding 2” Each
B 84027-OE Outside Elbow Fitting For Flat Box Molding .5” Each
B 84037-OE Outside Elbow Fitting For Flat Box Molding .75” Each
B 84127-OE Outside Elbow Fitting For Flat Box Molding 1.25” Each
B 84207-OE Outside Elbow Fitting For Flat Box Molding 2” Each
C 84024-FE Flat Elbow Fitting For Flat Box Molding .5” Each
C 84034-FE Flat Elbow Fitting For Flat Box Molding .75” Each
C 84124-FE Flat Elbow Fitting For Flat Box Molding 1.25” Each
C 84204-FE Flat Elbow Fitting For Flat Box Molding 2” Each
D 84023-C End Cap Fitting .5” Each
D 84033-C End Cap Fitting .75” Each
D 84123-C End Cap Fitting 1-1/4” Each
D 84203-C End Cap Fitting 2” Each
E 84209-12-T Tee Reducer 2” x 1.25” x .5” Each
A B C
D E
Standard colors are Beige and White
RACEWAY Fittings and Accessories for Olympic Plastic Molding
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog 89
RACEWAY Fittings and Accessories for Olympic Plastic Molding
Figure Part# Description Dimensions UOM
A 84032-DSC Drop Splice Fitting .75”W x 12”L Each
A 84122-DSC Drop Splice Fitting 1.25”W x 12”L Each
A 84222-DSC Drop Splice Fitting 2”W x 12”L Each
B 84022-SC Seam Cover / Joint Cover Fitting .5” x 1.5” Each
B 84032-SC Seam Cover / Joint Cover Fitting .75” x 1.5” Each
B 84122-SC Seam Cover / Joint Cover Fitting 1.25” x 1.5” Each
B 84202-SC Seam Cover / Joint Cover Fitting 2” x 1.5” Each
B 84302-SC Seam Cover / Joint Cover Fitting 3” x 1.5” Each
C B-16000 Quick Dry Weld In A Tube - Each
D 8450-ATR Double Sided Adhesive Backing .5” x 216’ Each
D 8451-ATR Double Sided Adhesive Backing .875” x 216’ Each
Standard colors are Beige, Brown and Brick RedCustom colors available on molding for a minimum run of 3,000 ft. (500 pieces for fittings)Call Customer Service for more information
A B C D
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog90
Figure Part# Description Dimensions UOM
A 84140-FBMH Flat Box Molding 2”W x .75”H x 8’L 192 / Ctn
A 84180-FBMH Flat Box Molding 2”W x 1.25”H x 8’L 144’ / Ctn
A 84200-FBMH Flat Box Molding 2”W x 2”H x 8’L 64’ / Ctn
A 84242-FBMH Flat Box Molding 2.125”W x 2.5”H x 8’L 64’ / Ctn
B 84146-IE/FBM Inside Elbow .75” x 2” x 8” Each
B 84186-IE/FBM Inside Elbow 1.25” x 2” x 8” Each
B 84206-IE/FBM Inside Elbow 2” x 2” x 8” Each
C 84147-OE/FBM Outside Elbow .75” x 2” x 8” Each
C 84187-OE/FBM Outside Elbow 1.25” x 2” x 8” Each
C 84207-OE/FBM Outside Elbow 2” x 2” x 8” Each
D 84144-FE/FBM Flat 90 Degree Elbow .75” x 2” Each
D 84184-FE/FBM Flat 90 Degree Elbow 1.25” x 2” Each
D 84204-FE/FBM Flat 90 Degree Elbow 2” x 2” Each
Standard colors are Ivory, White and Office WhiteAdd I, W or OW for color designation
A B C D
RACEWAY Flat Box MoldingFlat Box is a two piece molding with a snap-on cover that is easy to re-enter The special V-shaped grooves in the cover allow for a tighter, more secure fit to the base
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog 91
STEEL RACEWAY Olympic High Security Steel Molding
Figure Part# Description Dimensions UOM
A 84030-CMM .75” Olympic High Security Steel Molding .5” x 1” x 1” x 8’ 224’ / Ctn
A 84120-CMM 1.25” Olympic High Security Steel Molding 1.21875” x 1” x 1.875” x 8’ 224’ / Ctn
A 84200-CMM 2” Olympic High Security Steel Molding 2” x 1” x 3” x 8’ 192’ / Ctn
A 84300-CMM 3” Olympic High Security Steel Molding 2.234375” x 2” x 3” x 8’ 96’ / Ctn
B 84032-MB Mounting Bracket For Use With 84030-CMM Molding 5” Each
B 84122-MB Mounting Bracket For Use With 84120-CMM Molding 5” Each
B 84205-MB Mounting Bracket For Use With 84200-CMM Molding 5” Each
B 84306-MB Mounting Bracket For Use With 84300-CMM Molding 8” Each
C 84030-MBL High Security Full Length Backing For Use With 84030-CMM Molding .75” x 8’ 8’
C 84120-MBL High Security Full Length Backing For Use With 84120-CMM Molding 1.25” x 8’ 8’
C 84200-MBL High Security Full Length Backing For Use With 84200-CMM Molding 2” x 8’ 8’
C 84300-MBL High Security Full Length Backing For Use With 84300-CMM Molding 3” x 8’ 8’
A B C
Features• .5” flanges on each side• Mounting hole punch every two feet• Great for where high security protection is required• Ideal for uneven mounting surfaces
Benefits• New Tuff Top Coating 10 Year Warranty 26 Gauge Galvanized Steel• Track Molding Olympic High Security Track Molding snaps over full length backing or mounting brackets• Standard Colors White, Beige, Brown and Brick Red• Category 5, 5E and 6 1” Bend Radius Compliant• Attach steel moldings to practically any surface with easy-to-use mounting brackets• Simply mount brackets, attach cable to brackets with tie-wraps, and snap molding onto the brackets• SA minimum of one clip for every four feet of molding is recommended
Standard colors are Beige, White, Dark Brown and Dark Red.
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog92
A B C
D E
Figure Part# Description Dimensions Weight UOM
A 84036-IEM Inside Elbow Fitting 75” 0.07 Lbs Each
A 84126-IEM Inside Elbow Fitting 1.25” 0.14 Lbs Each
A 84206-IEM Inside Elbow Fitting 2” 0.21 Lbs Each
A 84306-IEM Inside Elbow Fitting 3” 0.26 Lbs Each
B 84033-ECM End Cap Fitting 3/4” 0.07 Lbs Each
B 84123-ECM End Cap Fitting 1.25” 0.10 Lbs Each
B 84203-ECM End Cap Fitting 2” 0.15 Lbs Each
B 84303-ECM End Cap Fitting 3” 0.30 Lbs Each
C 84030-JBM Bell Flange Fitting .75” x 6” x 4” 0.29 Lbs Each
C 84120-JBM Bell Flange Fitting 1.25” x 6” x 4” 0.33 Lbs Each
C 84200-JBM Bell Flange Fitting 2” x 6” x 4” 0.34 Lbs Each
C 84300-JBM Bell Flange Fitting 3” x 6” x 4” 0.50 Lbs Each
D 84037-OEM Outside Elbow Fitting .75” 0.11 Lbs Each
D 84127-OEM Outside Elbow Fitting 1.25” 0.19 Lbs Each
D 84207-OEM Outside Elbow Fitting 2” 0.21 Lbs Each
D 84307-OEM Outside Elbow Fitting 3” 0.45 Lbs Each
E 84038-TMB Tee Fitting .75” 0.11 Lbs Each
E 84128-TMB Tee Fitting 1.25” 0.35 Lbs Each
E 84208-TMB Tee Fitting 2” 0.36 Lbs Each
E 84308-TMB Tee Fitting 3” 0.72 Lbs Each
Standard colors are Beige, White, Dark Brown and Dark Red
STEEL RACEWAY Fittings and AccessoriesNew Tuff Top Coating for Olympic Steel Molding
SEC
TIO
N 7
PLA
STIC
& S
TEEL
INST
ALL
ATI
ON
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog 93
C
STEEL RACEWAY Fittings and Accessories NewTuff Top Coating for Olympic Steel MoldingCategory 5, 5E and 6 1” Bend Radius Compliant
A B
D E F
Figure Part# Description Dimensions Weight UOM
A 84034-FEMB Flat 90 Degree Elbow Fitting .75” 0.16 Lbs Each
A 84124-FEMB Flat 90 Degree Elbow Fitting 1.25” 0.30 Lbs Each
A 84204-FEMB Flat 90 Degree Elbow Fitting 2” 0.37 Lbs Each
A 84304-FEMB Flat 90 Degree Elbow Fitting 3” 0.49 Lbs Each
B 84128-03-T Tee Reducer Fitting 1.25” x .75” 0.33 Lbs Each
B 84208-03-T Tee Reducer Fitting 2” x 1.25” 0.35 Lbs Each
B 84308-12-T Tee Reducer Fitting 3” x 1.25” 0.37 Lbs Each
C 84033-SCM Seam Cover Fitting .75” x 3” 0.07 Lbs Each
C 84122-SCM Seam Cover Fitting 1.75” x 3” 0.08 Lbs Each
C 84222-SCM Seam Cover Fitting 2” x 3” 0.10 Lbs Each
C 84302-SCM Seam Cover Fitting 3” x 3” 0.15 Lbs Each
D 84J251 Cutting Tool For Steel Molding - - Each
E 84002-ET Entry Tool For Molding - 0.05 Lbs Each
F 12716 Beige Touch Up Paint 13 oz 0.70 Lbs Each
F 12715 Brown Touch Up Paint 13 oz 0.70 Lbs Each
F 12717 Brick Red Touch Up Paint 13 oz 0.70 Lbs Each
F 12718 White Touch Up Paint 13 oz 0.70 Lbs Each
Standard colors are Beige, White, Dark Brown and Dark Red
SECTIO
N 7
PLA
STIC &
STEELIN
STALLA
TION
PR
OD
UC
TS
Multilink’s Installation & Construction Catalog94
PLASTIC AND STEEL INSTALLATIONPRODUCTS FOR FIBER OPTIC CABLE
SECTION 8
SEC
TIO
N 8
PLA
STIC
& S
TEEL
IN
STA
LLA
TIO
NP
RO
DU
CTS
FO
R F
IBER
OP
TIC
CA
BLE
Multilink’s Installation & Construction Catalog 95
FIBER OPTIC RACEWAYSteel Molding
A B CD
E
F
H
G
Steel Raceway Stock ID
Description Beige Brick Red Brown White Std. CRT Size UOM
84030-CMM 3/4” 20117 20119 20118 20115 224 ft Each
84120-CMM 1-1/4” 20137 20139 20138 20136 224 ft Each
84200-CMM 2” 20167 20169 20168 20171 192 ft Each
84300-CMM 3” 20194 20195 20196 20197 96 ft Each
Full Length Metal Backing
Stock ID Description Std. CRT Size UOM
25913 84030-MBL / Full length Metal Backing for3/4” Metal Molding
10/Pack Each
25933 84120-MBL / Full Length Metal Backing for 1-1/4” Metal Molding
10/Pack Each
25993 84200-MBL / Full Length Metal Backing for2” Metal Molding
10/Pack Each
25934 84300-MBL / Full Length Metal Backing for3” Metal Molding
10/Pack Each
5” Long Mounting Brackets
Stock ID Description Std. CRT Size UOM
25912 84032-MB / 3/4’ Mounting Brackets 224 ft Each
25932 84122-MB / 1 1/4 Mounting Brackets 224 ft Each
25962 84205-MB / 2” Mounting Brackets 192 ft Each
25963 84306-MB / 3” Mounting Brackets 96 ft Each
Seam Covers Stock ID
Description Beige Brick Red Brown White Carton Qty UOM
84033-SCM 3/4” 25917 25919 25918 25920 10/Pack Each
84122-SCM 1-1/4” 25937 25939 25938 25940 10/Pack Each
84222-SCM 2” 25967 25969 25968 25961 10/Pack Each
84302-SCM 3” 25009 25008 25109 25007 10/Pack Each
SECTIO
N 8
PLA
STIC &
STEEL INSTA
LLATIO
NP
RO
DU
CTS FO
R FIB
ER O
PTIC
CA
BLE
Multilink’s Installation & Construction Catalog96
FIBER OPTIC RACEWAYSteel Molding
Outside Corners Stock ID
Description Beige Brick Red Brown White Carton Qty UOM
87037-OEM 3/4” 25117 25119 25118 25326 10/Pack Each
84127-OEM2 1-1/4” 10-9303 10-9304 10-9302 10-9301 10/Pack Each
84207-OEM2 2” 10-9307 10-9308 10-9306 10-9305 10/Pack Each
84377-OEM 3” 25194 25195 25196 25002 10/Pack Each
Inside Corners Stock ID
Description Beige Brick Red Brown White Carton Qty UOM
84036-IEM 3/4” 25017 25019 25018 25323 10/Pack Each
84126-IEM2 1-1/4” 10-9295 10-9296 10-9294 10-9293 10/Pack Each
84206-IEM2 2” 10-9299 10-9300 10-9298 10-9297 10/Pack Each
84306-IEM 3” 25096 25095 25094 25001 10/Pack Each
End Cap Stock ID
Description Beige Brick Red Brown White Carton Qty UOM
84033-ECM 3/4” 25317 25319 25318 25332 10/Pack Each
84123-ECM 1-1/4” 25337 25339 25338 25333 10/Pack Each
84203-ECM 2” 25367 25369 25368 25334 10/Pack Each
84303-ECM 3” 25396 25395 25394 25005 10/Pack Each
Right Angles Stock ID
Description Beige Brick Red Brown White Carton Qty UOM
84034-FEMB 3/4” 25217 25219 25218 25329 10/Pack Each
84124-FEM2 1-1/4” 10-9278 10-9279 10-9277 10-9276 10/Pack Each
84204-FEM2 2” 10-9286 10-9287 10-9285 10-9284 10/Pack Each
84304-FEMB 3” 25294 25295 25296 25003 10/Pack Each
T Fitting Stock ID
Description Beige Brick Red Brown White Carton Qty UOM
84038-TMB 3/4” 25417 25419 25418 25420 10/Pack Each
84128-TMB2 1-1/4” 10-9282 10-9283 10-9281 10-9280 10/Pack Each
84208-TMB2 2” 10-9290 10-9291 10-9289 10-9288 10/Pack Each
84308-TMB 3” 25494 25495 25496 25006 10/Pack Each
Entry Hoof Stock ID
Description Beige Brick Red Brown White Carton Qty UOM
84123-ECM2 1-1/4” 10-9311 10-9312 10-9310 10-9309 10/Pack Each
84203-ECM2 2” 10-9315 10-9316 10-9314 10-9313 10/Pack Each
Bell Flanges Stock ID
Description Beige Brick Red Brown White Carton Qty UOM
84030-JBM 3/4” 25617 25619 25617 25321 10/Pack Each
84120-JBM 1-1/4” 25637 25639 25638 25636 10/Pack Each
84200-JBM 2” 25667 25669 25668 25322 10/Pack Each
84300-JBM 3” 25694 25695 25696 25004 10/Pack Each
SEC
TIO
N 8
PLA
STIC
& S
TEEL
IN
STA
LLA
TIO
NP
RO
DU
CTS
FO
R F
IBER
OP
TIC
CA
BLE
Multilink’s Installation & Construction Catalog 97
STEEL RACEWAYFittings and AccessoriesNew Tuff Top Coating for Olympic Steel MoldingCategory 5, 5E & 6 - 1” Bend Radius Compliant
Stock ID Description Dimensions Weight Lbs. Carton Qty UOM
84034-FEMB Flat 90 Degree Elbow Fitting 3/4” 0.16 10/Pack Each
84124-FEMB Flat 90 Degree Elbow Fitting 1-1/4” 0.30 10/Pack Each
84204-FEMB Flat 90 Degree Elbow Fitting 2” 0.37 10/Pack Each
84304-FEMB Flat 90 Degree Elbow Fitting 3” 0.49 10/Pack Each
Stock ID Description Dimensions Weight Lbs. Carton Qty UOM
84128-03-T Tee Reducer Fitting 1-1/4” - 3/4” 0.33 10/Pack Each
84208-03-T Tee Reducer Fitting 2” - 1-1/4” 0.35 10/Pack Each
84308-03-T Tee Reducer Fitting 3” - 1-1/4” 0.37 10/Pack Each
Stock ID Description Dimensions Weight Lbs. Carton Qty UOM
84033-SCM Seam Cover Fitting 3/4” x 3” 0.07 10/Pack Each
84033-SCM Seam Cover Fitting 1-3/4” x 3” 0.08 10/Pack Each
84033-SCM Seam Cover Fitting 2” x 3” 0.10 10/Pack Each
84033-SCM Seam Cover Fitting 3” x 3” 0.15 10/Pack Each
Stock ID Description Dimensions Weight Lbs. UOM
84J1251 Cutting Tool For Steel Molding - - Each
Stock ID Description Dimensions Weight Lbs. UOM
84002-ET Entry Tool for Molding - 0.05 Each
Stock ID Description Dimensions Weight Lbs. UOM
12715 Brown Touch Up Paint - 0.70 Each
12715 Beige Touch Up Paint - 0.70 Each
12717 Brick Red Touch Up Paint - 0.70 Each
12718 White Touch Up Paint - 0.70 Each
Standard Colors are Beige, Brick Red, Brown & White
SECTIO
N 8
PLA
STIC &
STEEL INSTA
LLATIO
NP
RO
DU
CTS FO
R FIB
ER O
PTIC
CA
BLE
Multilink’s Installation & Construction Catalog98
FIBER OPTIC RACEWAYCove Molding
Not Sold Separately
Not Sold Separately
Not Sold Separately
A
B
CD E
F
Part # Description UOM
A MCF27-TRT-XX T Fitting & Bend Radius for Cove Molding 10 / Pack
Stock ID Part # Description Color Std. CRT Size UOM
C 10-9361 84125-OERW-IV Outside Corner & Bend Radius for Cove Molding Ivory 10 Each
C 10-9362 84125-OERW-LW Outside Corner & Bend Radius for Cove Molding Linen White 10 Each
Stock ID Part # Description Color Std. CRT Size UOM
D 10-9359 84125-IERW-IV Inside Corner & Bend Radius for Cove Molding Ivory 10 Each
D 10-9471 84125-IERW-LW Inside Corner & Bend Radius for Cove Molding Linen White 10 Each
Stock ID Part # Description Color Std. CRT Size UOM
E 10-9358 84125-W-IV Cove Molding Int. Plastic Ivory 160 Feet
E 10-9357 84125-W-LW Cove Molding Int. Plastic Linen White 160 Feet
Stock ID Part # Description Color Std. CRT Size UOM
- 10-9364 84125-CRC-IV Cable Retention Clip for Cove Molding Ivory 10 Each
- 10-9363 84125-CRC-LW Cable Retention Clip for Cove Molding Linen White 10 Each
Standard colors are Ivory, White and Office WhiteReplace XX with I, W or OW for color designationItems B is on Page 106 & F is on Page 104
SEC
TIO
N 8
PLA
STIC
& S
TEEL
IN
STA
LLA
TIO
NP
RO
DU
CTS
FO
R F
IBER
OP
TIC
CA
BLE
Multilink’s Installation & Construction Catalog 99
FIBER OPTIC RACEWAYSquare Latch Duct Molding
A
B
CD
E F
G
H
Stock ID Part # Description Color Std. CRT Size UOM
A 10-9398 MRF12-TRT-IV “T” Fitting & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
A 10-9397 MRF12-TRT-LW “T” Fitting & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
A 10-9403 MRF17-TRT-IV “T” Fitting & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
A 10-9402 MRF17-TRT-LW “T” Fitting & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
A 10-9395 MRF75-TRT-IV “T” Fitting & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
A 10-9394 MRF75-TRT-LW “T” Fitting & Radius for Sq. Plastic & Latch Duct Linen White* 10 PackNot Sold Separately
* Manufactured Out Of Special Heat Resistant Material
A 99615K MRF75-TRT-I .75” Tee Fitting for MRM75 and MRC75 Ivory 10 Pack
A 99616K MRF75-TRT-W .75” Tee Fitting for MRM75 and MRC75 White 10 Pack
A 99614K MRF75-TRT-OW .75” Tee Fitting for MRM75 and MRC75 Office White 10 Pack
A 99620K MRF12-TRT-I 1.25” Tee Fitting for MRM12 and MRC12 Ivory 10 Pack
A 99621K MRF12-TRT-W 1.25” Tee Fitting for MRM12 and MRC12 White 10 Pack
A 99623K MRF12-TRT-OW 1.25” Tee Fitting for MRM12 and MRC12 Office White 10 Pack
A 99625K MRF17-TRT-I 1.75” Tee Fitting for MRM17 and MRC17 Ivory 10 Pack
A 99626K MRF17-TRT-W 1.75” Tee Fitting for MRM17 and MRC17 White 10 Pack
A 99624K MRF17-TRT-OW 1.75” Tee Fitting for MRM17 and MRC17 Office White 10 Pack
Stock ID Part # Description Color Std. CRT Size UOM
E 10-9494 MRF12-ICR-IV IC & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
E 10-9493 MRF12-ICR-LW IC & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
E 10-9502 MRF17-ICR-IV IC & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
E 10-9501 MRF17-ICR-LW IC & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
E 10-9479 MRF75-ICR-IV IC & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
E 10-9478 MRF75-ICR-LW IC & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
Not Sold Separately
E 99459K MRF75-ICR-I .75” Inside Corner Fitting for MRM75 & MRC75 Ivory 10 Pack
E 99454K MRF75-ICR-W .75” Inside Corner Fitting for MRM75 & MRC75 White 10 Pack
E 99455K MRF75-ICR-OW .75” Inside Corner Fitting for MRM75 & MRC75 Office White 10 Pack
E 99463K MRF12-ICR-I 1.25” Inside Corner Fitting for MRM12 & MRC12 Ivory 10 Pack
E 99465K MRF12-ICR-W 1.25” Inside Corner Fitting for MRM12 & MRC12 White 10 Pack
E 99460K MRF12-ICR-OW 1.25” Inside Corner Fitting for MRM12 & MRC12 Office White 10 Pack
E 99469K MRF17-ICR-I 1.75” Inside Corner Fitting for MRM17 & MRC17 Ivory 10 Pack
E 99470K MRF17-ICR-W 1.75” Inside Corner Fitting for MRM17 & MRC17 White 10 Pack
E 99475K MRF17-ICR-OW 1.75” Inside Corner Fitting for MRM17 & MRC17 Office White 10 Pack
Item B is on Page 106, Items G & H are on Page 104
SECTIO
N 8
PLA
STIC &
STEEL INSTA
LLATIO
NP
RO
DU
CTS FO
R FIB
ER O
PTIC
CA
BLE
Multilink’s Installation & Construction Catalog100
FIBER OPTIC RACEWAYSquare Latch Duct Molding
Stock ID Part # Description Color Std. CRT Size UOM
C 10-9461 MRM-12-IV Latch Duct 1.75” x .75” x 8’ w/ Non-Adhesive Bk. Ivory* 160 Feet
C 10-9460 MRM-12-LW Latch Duct 1.75” x .75” x 8’ w/ Non-Adhesive Bk. Linen White* 160 Feet
C 10-9463 MRM-17-IV Latch Duct 1.75” x .75” x 8’ w/ Non-Adhesive Bk. Ivory* 160 Feet
C 10-9462 MRM-17-LW Latch Duct 1.75” x .75” x 8’ w/ Non-Adhesive Bk. Linen White* 160 Feet
C 10-9459 MRM-75-IV Latch Duct 1.75” x .75” x 8’ w/ Non-Adhesive Bk. Ivory* 160 Feet
C 10-9458 MRM-75-LW Latch Duct 1.75” x .75” x 8’ w/ Non-Adhesive Bk. Linen White* 160 Feet
Stock ID Part # Description Color Std. CRT Size UOM
D 10-9496 MRF12-OCR-IV OC & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
D 10-9495 MRF12-OCR-LW OC & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
D 10-9504 MRF17-OCR-IV OC & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
D 10-9503 MRF17-OCR-LW OC & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
D 10-9476 MRF75-OCR-IV OC & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
D 10-9477 MRF75-OCR-LW OC & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
Stock ID Part # Description Color Std. CRT Size UOM
- 10-9455 MRC-12-IV Sq. Plastic Molding w/ Non-Adhesive Backing Ivory* 160 Feet
- 10-9454 MRC-12-LW Sq. Plastic Molding w/ Non-Adhesive Backing Linen White* 160 Feet
- 10-9457 MRC-17-IV Sq. Plastic Molding w/ Non-Adhesive Backing Ivory* 160 Feet
- 10-9456 MRC-17-LW Sq. Plastic Molding w/ Non-Adhesive Backing Linen White* 160 Feet
C 99828 MRM75-I-T .75” Pre-Adhesive Bk. Latch Duct .75” x .5” x 6’ Ivory 120 Feet
C 99825 MRM75-W-T .75” Pre-Adhesive Bk. Latch Duct .75” x .5” x 6’ White 120 Feet
C 99830 MRM75-OW-T .75” Pre-Adhesive Bk. Latch Duct .75” x .5” x 6’ Office White 120 Feet
C 99838 MRM12-I-T 1.25” Pre-Adhesive Bk. Latch Duct 1.25” x .75” x 6’ Ivory 120 Feet
C 99835 MRM12-W-T 1.25” Pre-Adhesive Bk. Latch Duct 1.25” x .75” x 6’ White 120 Feet
C 99831 MRM12-OW-T 1.25” Pre-Adhesive Bk. Latch 1.25” x .75” x 6’ Office White 120 Feet
C 99848 MRM17-I-T 1.75” Pre-Adhesive Bk. Latch Duct 1.75” x 1” x 6’ Ivory 120 Feet
C 99845 MRM17-W-T 1.75” Pre-Adhesive Bk. Latch Duct 1.75” x 1” x 6’ White 120 Feet
C 99832 MRM17-OW-T 1.75” Pre-Adhesive Bk. Latch 1.75” x 1” x 6’ Office White 120 Feet
D 99441K MRF75-OCR-I .75” OC Fitting for MRM75 & MRC75 Ivory 10 Pack
D 99442K MRF75-OCR-W .75” OC Fitting for MRM75 & MRC75 White 10 Pack
D 99443K MRF75-OCR-OW .75” OC Fitting for MRM75 & MRC75 Office White 10 Pack
D 99446K MRF12-OCR-I 1.25” OCr Fitting for MRM12 & MRC12 Ivory 10 Pack
D 99447K MRF12-OCR-W 1.25” OC Fitting for MRM12 & MRC12 White 10 Pack
D 99445K MRF12-OCR-OW 1.25” OCr Fitting for MRM12 & MRC12 Office White 10 Pack
D 99451K MRF17-OCR-I 1.75” OC Fitting for MRM17 & MRC17 Ivory 10 Pack
D 99452K MRF17-OCR-W 1.75” OC Fitting for MRM17 & MRC17 White 10 Pack
D 99450K MRF17-OCR-OW 1.75” OC Fitting for MRM17 and MRC17 Office White 10 Pack
SEC
TIO
N 8
PLA
STIC
& S
TEEL
IN
STA
LLA
TIO
NP
RO
DU
CTS
FO
R F
IBER
OP
TIC
CA
BLE
Multilink’s Installation & Construction Catalog 101
FIBER OPTIC RACEWAY Square Latch Duct Molding - Continued
Stock ID Part # Description Color Std. CRT Size UOM
- 10-9490 MRF12-EC-IV End Cap for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack
- 10-9469 MRF12-EC-LW End Cap for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack
- 10-9491 MRF12-EC-IV End Cap for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack
- 10-9470 MRF17-EC-LW End Cap for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack
- 10-9488 MRF75-EC-IV End Cap for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack
- 10-9489 MRF75-EC-LW End Cap for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack
- 99645K MRF75-EC-I .75” End Cap Fitting for MRM75 & MRC75 Ivory 10 Pack
- 99646K MRF75-EC-W .75” End Cap Fitting for MRM75 & MRC75 White 10 Pack
- 99647K MRF75-EC-OW .75” End Cap Fitting for MRM75 & MRC75 Office White 10 Pack
- 99651K MRF12-EC-I 1.25” End Cap Fitting for MRM12 & MRC12 Ivory 10 Pack
- 99652K MRF12-EC-W 1.25” End Cap Fitting for MRM12 & MRC12 White 10 Pack
- 99653K MRF12-EC-OW 1.25” End Cap Fitting for MRM12 & MRC12 Office White 10 Pack
- 99656K MRF17-EC-I 1.75” End Cap Fitting for MRM17 & MRC17 Ivory 10 Pack
- 99657K MRF17-EC-W 1.75” End Cap Fitting for MRM17 & MRC17 White 10 Pack
- 99658K MRF17-EC-OW 1.75” End Cap Fitting for MRM17 & MRC17 Office White 10 Pack
Stock ID Part # Description Color Std. CRT Size UOM
- 10-9500 MRF12-JC-IV Join Cover for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack
- 10-9499 MRF12-JC-LW Join Cover for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack
- 10-9539 MRF17-JC-IV Join Cover for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack
- 10-9400 MRF17-JC-LW Join Cover for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack
- 10-9474 MRF75-JC-IV Join Cover for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack
- 10-9475 MRF75-JC-LW Join Cover for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack
- 99411K MRF75-JC-I .75” Joint Cover Fitting for MRM75 & MRC75 Ivory 10 Pack
- 99412K MRF75-JC-W .75” Joint Cover Fitting for MRM75 & MRC75 White 10 Pack
- 99413K MRF75-JC-OW .75” Joint Cover Fitting for MRM75 & MRC75 Office White 10 Pack
- 99416K MRF12-JC-I 1.25” Joint Cover Fitting for MRM12 & MRC12 Ivory 10 Pack
- 99417K MRF12-JC-W 1.25” Joint Cover Fitting for MRM12 & MRC12 White 10 Pack
- 99418K MRF12-JC-OW 1.25” Joint Cover Fitting for MRM12 & MRC12 Office White 10 Pack
- 99421K MRF17-JC-I 1.75” Joint Cover Fitting for MRM17 & MRC17 Ivory 10 Pack
- 99422K MRF17-JC-W 1.75” Joint Cover Fitting for MRM17 & MRC17 White 10 Pack
- 99423K MRF17-JC-OW 1.75” Joint Cover Fitting for MRM17 & MRC17 Office White 10 Pack
Not Sold Separately
Stock ID Part # Description Color Std. CRT Size UOM
F 10-9498 MRF12-FER-IV Flat Elbow & Radius for Sq. Plastic & Latch Duct Ivory 10 Pack
F 10-9497 MRF12-FER-LW Flat Elbow & Radius for Sq. Plastic & Latch Duct Linen White 10 Pack
F 10-9506 MRF17-FER-IV Flat Elbow & Radius for Sq. Plastic & Latch Duct Ivory 10 Pack
F 10-9505 MRF17-FER-LW Flat Elbow & Radius for Sq. Plastic & Latch Duct Linen White 10 Pack
F 10-9481 MRF75-FER-IV Flat Elbow & Radius for Sq. Plastic & Latch Duct Ivory 10 Pack
F 10-9480 MRF75-FER-LW Flat Elbow & Radius for Sq. Plastic & Latch Duct Linen White 10 Pack
F 99486K MRF75-FER-I .75” Flat Elbow Fitting for MRM75 & MRC75 Ivory 10 Pack
F 99487K MRF75-FER-W .75” Flat Elbow Fitting for MRM75 & MRC75 White 10 Pack
F 99485K MRF75-FER-OW .75” Flat Elbow Fitting for MRM75 & MRC75 Office White 10 Pack
F 99491K MRF12-FER-I 1.25” Flat Elbow Fitting for MRM12 & MRC12 Ivory 10 Pack
F 99492K MRF12-FER-W 1.25” Flat Elbow Fitting for MRM12 & MRC12 White 10 Pack
F 99490K MRF12-FER-OW 1.25” Flat Elbow Fitting for MRM12 & MRC12 Office White 10 Pack
F 99496K MRF17-FER-I 1.75” Flat Elbow Fitting for MRM17 & MRC17 Ivory 10 Pack
F 99497K MRF17-FER-W 1.75” Flat Elbow Fitting for MRM17 & MRC17 White 10 Pack
F 99495K MRF17-FER-OW 1.75” Flat Elbow Fitting for MRM17 & MRC17 Office White 10 Pack
SECTIO
N 8
PLA
STIC &
STEEL INSTA
LLATIO
NP
RO
DU
CTS FO
R FIB
ER O
PTIC
CA
BLE
Multilink’s Installation & Construction Catalog102
FIBER OPTIC RACEWAYSquare Plastic Molding Exterior Grade
A
BC
D
E
F
Not Sold Separately
Not Sold Separately
Not Sold Separately
Not Sold Separately
Stock ID Part # Description Std. CRT Size UOM
A 10-9731 MRF12-TRT-E-IV T-Fitting & Radius for Sq. Plastic Exterior Grade 10 Pack
A 10-9734 MRF17-TRT-E-IV T-Fitting & Radius for Sq. Plastic Exterior Grade 10 Pack
Stock ID Part # Description Std. CRT Size UOM
B 10-9465 MRC12-E-IV Sq. Plastic Molding w/ Non-Adhesive Backing Exterior Grade 160 Feet
B 10-9423 MRC17-E-IV Sq. Plastic Molding w/ Non-Adhesive Backing Exterior Grade 160 Feet
Stock ID Part # Description Std. CRT Size UOM
C 10-9417 MRF12-OCR-E-IV Outside Corner and Radius for Sq. Plastic Exterior Grade 10 Pack
C 10-9427 MRF17-OCR-E-IV Outside Corner and Radius for Sq. Plastic Exterior Grade 10 Pack
Stock ID Part # Description Std. CRT Size UOM
D 10-9415 MRF12-ICR-E-IV Inside Corner and Radius for Sq. Plastic Exterior Grade 10 Pack
D 10-9425 MRF17-ICR-E-IV Inside Corner and Radius for Sq. Plastic Exterior Grade 10 Pack
Stock ID Part # Description Std. CRT Size UOM
E 10-9419 MRF12-FER-E-IV Flat Elbow and Radius for Sq. Plastic Exterior Grade 10 Pack
E 10-9429 MRF17-FER-E-IV Flat Elbow and Radius for Sq. Plastic Exterior Grade 10 Pack
Stock ID Part # Description Std. CRT Size UOM
F 10-9729 MRF12-EC-E-IV End Cap for Sq. Plastic Exterior Grade 10 Pack
F 10-9730 MRF17-EC-E-IV End Cap for Sq. Plastic Exterior Grade 10 Pack
Stock ID Part # Description Std. CRT Size UOM
- 10-9421 MRF12-JC-E-IV Seam Cover for Sq. Plastic Exterior 10 Pack
- 10-9431 MRF17-JC-E-IV Seam Cover for Sq. Plastic Exterior 10 Pack
Exterior Grade material is only available in Exterior Ivory
SEC
TIO
N 8
PLA
STIC
& S
TEEL
IN
STA
LLA
TIO
NP
RO
DU
CTS
FO
R F
IBER
OP
TIC
CA
BLE
Multilink’s Installation & Construction Catalog 103
AB
CD
E
F
G
H
I
Not Sold Separately
Stock ID Part # Description Color Std. CRT Size UOM
A 10-9379 MRW15-EC-L-IV Left End Cap for Overlay Molding Ivory 10 Pack
A 10-9378 MRW15-EC-L-LW Left End Cap for Overlay Molding Linen White 10 Pack
Stock ID Part # Description Color Std. CRT Size UOM
B 10-9387 MRW-15-IV Overlay Molding/Open Crown 1.5” x .75” for MDU Ivory 10 Pack
B 10-9386 MRW-15-LW Overlay Molding/Open Crown 1.5” x .75” for MDU Linen White 10 Pack
Standard Colors are Linen White & IvoryItem E is on Page 106 & Item H is on Page 104
Stock ID Part # Description Color Std. CRT Size UOM
C 10-9376 MRW-DTRB-IV Seam Cover for Overlay Molding Ivory 10 Pack
C 10-9375 MRW-DTRB-LW Seam Cover for Overlay Molding Linen White 10 Pack
Stock ID Part # Description Color Std. CRT Size UOM
D 10-9383 MRW-SC-IV Cover Drop “T” and Radius for Overlay Molding Ivory 10 Pack
D 10-9382 MRW-SC-LW Cover Drop “T” and Radius for Overlay Molding Linen White 10 Pack
Patent In Process
FIBER OPTIC RACEWAYOverlay MoldingTM
SECTIO
N 8
PLA
STIC &
STEEL INSTA
LLATIO
NP
RO
DU
CTS FO
R FIB
ER O
PTIC
CA
BLE
Multilink’s Installation & Construction Catalog104
FIBER OPTIC RACEWAYOverlay Molding - Continued
Overlay MoldingTM was designed to be installed over an existing provider’s molding system. It is a two piece design, which allows for access to the first molding system without disconnecting any cables. The cover of the overlay simply snaps onto the base which is mounted below the existing molding and “covers up” the existing molding and the new base. The base of the Overlay MoldingTM has a smooth co-extruded flexible cable keeper which won’t damage any cables during installation or removal. The corner pieces include bend radius protectors to maintain the minimum bend radius of 1”.
Not Sold Separately
Stock ID Part # Description Color Std. CRT Size UOM
F 10-9391 MRW-15-OWCR-IV Outside Corner & Radius for Overlay Molding Ivory 10 Pack
F 10-9390 MRW-15-OWCR-LW Outside Corner & Radius for Overlay Molding Linen White 10 Pack
Standard Colors are Linen White & Ivory
Not Sold Separately
Stock ID Part # Description Color Std. CRT Size UOM
G 10-9389 MRW-15-OWCR-IV Inside Corner & Radius for Overlay Molding Ivory 10 Pack
G 10-9388 MRW-15-OWCR-LW Inside Corner & Radius for Overlay Molding Linen White 10 Pack
Stock ID Part # Description Color Std. CRT Size UOM
I 10-9380 MRW15-EC-R-IV Right End Cap for Overlay Molding Ivory 10 Pack
I 10-9381 MRW15-EC-R-LW Right End Cap for Overlay Molding Linen White 10 Pack
TM
SEC
TIO
N 8
PLA
STIC
& S
TEEL
IN
STA
LLA
TIO
NP
RO
DU
CTS
FO
R F
IBER
OP
TIC
CA
BLE
Multilink’s Installation & Construction Catalog 105
A
B
C
D
Not Sold Separately
Stock ID Part # Description Color Std. CRT Size UOM
A 10-9405 FDM3AB-IV Single Fiber Drop Molding Ivory 1200 Feet
A 10-9404 FDM3AB-LW Single Fiber Drop Molding Linen White 1200 Feet
Stock ID Part # Description Color Std. CRT Size UOM
B 10-9409 FDF3-OCR-IV OC & Radius for Single Fiber Drop Molding Ivory 10 Pack
B 10-9408 FDF3-OCR-LW OC & Radius for Single Fiber Drop Molding Linen White 10 Pack
Stock ID Part # Description Color Std. CRT Size UOM
C 10-9407 FDF3-ICR-IV IC & Molded Radius Single Fiber Drop Molding Ivory 10 Pack
C 10-9406 FDF3-ICR-LW IC & Molded Radius Single Fiber Drop Molding Linen White 10 Pack
Stock ID Part # Description Color Std. CRT Size UOM
D 10-9410 FDF3-FER-IV Flat Elbow w/ Molded RadiusSingle Fiber Drop Molding
Ivory 10 Pack
D 10-9411 FDF3-FER-LW Flat Elbow w/ Molded RadiusSingle Fiber Drop Molding
Linen White 10 Pack
FIBER OPTIC RACEWAYSingle Fiber Molding
SECTIO
N 8
PLA
STIC &
STEEL INSTA
LLATIO
NP
RO
DU
CTS FO
R FIB
ER O
PTIC
CA
BLE
Multilink’s Installation & Construction Catalog106
Stock ID Part # Description Dimensions Color Weight Lbs. UOM
99737 MRFUV-WE-I Universal Wall Entry - Ivory 1.60 Each
99737K MRFUV-WE-I Universal Wall Entry Kit - Ivory 1.60 Each
99734 MRFUV-WE-W Universal Wall Entry - White 1.60 Each
99734K MRFUV-WE-W Universal Wall Entry Kit - White 1.60 Each
99735 MRFUV-WE-OW Universal Wall Entry - Off White 1.60 Each
99735K MRFUV-WE-OW Universal Wall Entry Kit - Off White 1.60 Each
Not Sold Separately
Stock ID Part # Description Color Std. CRT Size UOM
10-9432 WEBRP Wall Entry BRP - 10 Each
Stock ID Part # Description Color Std. CRT Size UOM
10-9436 MRM-75-DCW-LW Drop Cable Wall Entry Hoof - Cover/Base Linen White 10 Each
10-9437 MRM-75-DCW-OW Drop Cable Wall Entry Hoof - Cover/Base Off White 10 Each
Stock ID Part # Description Color Std. CRT Size UOM
10-9484 MRF12-R75-IV Reducer Fitting Reduces 1-1/4” to 3/4” Ivory 10 Each
10-9485 MRF12-R75-LW Reducer Fitting Reduces 1-1/4” to 3/4” Linen White 10 Each
10-9486 MRF17-R75-IV Reducer Fitting Reduces 1-1/4” to 3/4” Ivory 10 Each
10-9487 MRF17-R75-LW Reducer Fitting Reduces 1-1/4” to 3/4” Linen White 10 Each
Not Sold Separately
FIBER OPTIC RACEWAYAccessories For Plastic Moldings
FIBER OPTIC RACEWAYAccessories For MRM & MRC Series Molding
Stock ID Part # Description Dimensions Color Weight Lbs. UOM
99580K MJB-1-I Single Gang Surface Mount Box 3.25” x 5” x 2” Ivory 0.20 Each
99581K MJB-1-WH Single Gang Surface Mount Box 3.25” x 5” x 2” White 0.20 Each
99584K MJB-1-OW Single Gang Surface Mount Box 3.25” x 5” x 2” Off White 0.20 Each
Stock ID Part # Description Dimensions Color Weight Lbs. UOM
99582K MJB-2-I Double Gang Surface Mount Box 5” x 5.25” x 2” Ivory 0.25 Each
99583K MJB-1-WH Double Gang Surface Mount Box 5” x 5.25” x 2” White 0.25 Each
99585K MJB-1-OW Double Gang Surface Mount Box 5” x 5.25” x 2” Off White 0.25 Each
Stock ID Part # Description Dimensions Color Weight Lbs. UOM
990000-MWP
MWP-13-I Single Gang Face Plate (3 Port Capacity) 2.75” x 4” x .5” Ivory 0.10 Each
990000M-PWHK
MWP-13-WH Single Gang Face Plate (3 Port Capacity) 2.75” x 4” x .5” White 0.10 Each
990000MW-POW
MWP-13-OW Single Gang Face Plate (3 Port Capacity) 2.75” x 4” x .5” Off White 0.10 Each
Stock ID Part # Description Dimensions Color Weight Lbs. UOM
990000MW-P16IV
MWP-16-I Single Gang Face Plate (6 Port Capacity) 2.75” x 4” x .5” Ivory 0.10 Each
990000W-P16WH
MWP-16-WH Single Gang Face Plate (6 Port Capacity) 2.75” x 4” x .5” White 0.10 Each
990000MW-P16OW
MWP-16-OW Single Gang Face Plate (6 Port Capacity) 2.75” x 4” x .5” Off White 0.10 Each
Category 5, 5E & 6 1” Bend Radius Compliant
SEC
TIO
N 8
PLA
STIC
& S
TEEL
IN
STA
LLA
TIO
NP
RO
DU
CTS
FO
R F
IBER
OP
TIC
CA
BLE
Multilink’s Installation & Construction Catalog 107
Applications & Features• Used to store up to 19 ft. of 3mm fiber optic cable• Used to store SC connectors• Interchangeable covers for different designs• MRM75 and Single Fiber sized easy to remove knockouts• Fiber Looms for easier cable management
FIBER OPTIC ACCESSORIESFiber Optic Interior Slack Storage Box
Stock ID Description Dimensions Weight Lbs. UOM
649-022-12 Flush Wall Entry Plug Bend Radius Protector Interior and Exterior Use Color: Ivory Only ( IV )
- - 100/Bag
Patent In Process
FIBER PLUG®
Multilink Plastic Flush Wall Entry PlugWith Built-In Bend Radius System
Multilink’s OSP slack storage box is 5” W x 5” L x 2” D. This OSP slack storage box is used for exterior slack storageapplications using 3mm single fiber cable. There are two stackable storage spools that allow storage of multiple singlefiber cable drops. Both of these spools are removable. In an instance where only one spool is sufficient, the spool caneither be secured at a lower level or can be mounted at an elevation onto the risers off the back of the inside of the boxas a spool on the upper level. This allows additional storage under the spool. There are three entry points sealed withremovable cap plugs, or it can be ordered without holes. The diameter of each entry hole is 1 inch. The box is equipped with a hex bolt (with a retainer) that can be secured using a standard 216C type wrench. In addition to the above, the box is also equipped with a provision for a hasp lock. A built-in hinge allows captive and non-captive flexibility.
Stock ID Description Dimensions Color Std. CRT Size UOM
020-004-23 Slack Box, Exterior with 3, 1” holes 4.8 L x 4.8 W x 2.2 D - 1 Each
020-004-24 Slack Box, Exterior without holes 4.8 L x 4.8 W x 2.2 D - 1 Each
FILL CHART
Bend Radius Cable Type EIA/TIA 40% Maximum Fill
1.263 Inches 3mm Fiber Optic Cable 5.2 1.58 M 13’ 3.9 MRT
1.211 Inches 3mm Fiber Optic Cable 4.4 1.34 M 11’ 3.52 MRT
FIBER OPTIC ACCESSORIESFiber Optic Exterior Slack Storage Box
Stock ID Description Color Std. CRT Size UOM
10-9434 Slack Storage Box Inside Living Unit Connector Ivory 1 Each
10-9433 Slack Storage Box Inside Living Unit Connector Linen White 1 Each
SECTIO
N 8
PLA
STIC &
STEEL INSTA
LLATIO
NP
RO
DU
CTS FO
R FIB
ER O
PTIC
CA
BLE
Multilink’s Installation & Construction Catalog108
Downspout Exterior Raceway System
Item Part # Description UOM
A 039-138-10 Downspout Molding White Plastic Exterior 10’ (2 Piece System, Cover & Base) 120 FT / Ctn
A 039-138-11 Downspout Molding Brown Plastic Exterior 10’ (2 Piece System, Cover & Base) 120 FT / Ctn
A 039-138-12 Downspout Molding Beige Plastic Exterior 10’ (2 Piece System, Cover & Base) 120 FT / Ctn
C 039-143-10 Downspout Wall Strap White 10 / PK
C 039-143-11 Downspout Wall Strap Brown 10 / PK
C 039-143-12 Downspout Wall Strap Beige 10 / PK
D 039-141-10 Downspout Seam Cover White 10 / PK
D 039-141-11 Downspout Seam Cover Brown 10 / PK
D 039-141-12 Downspout Seam Cover Beige 10 / PK
E 039-147-10 Downspout 45 Degree Fitting White (2 Piece System) Each
E 039-147-11 Downspout 45 Degree Fitting Brown (2 Piece System) Each
E 039-147-12 Downspout 45 Degree Fitting Beige (2 Piece System) Each
F 039-146-10 Downspout 90 Degree Flat Fitting White (2 Piece System) Each
F 039-146-11 Downspout 90 Degree Flat Fitting Brown (2 Piece System) Each
F 039-146-12 Downspout 90 Degree Flat Fitting Beige (2 Piece System) Each
G 039-139-10 Downspout End Cap Fitting White (1 Piece) 10 / PK
G 039-139-11 Downspout End Cap Fitting Brown (1 Piece) 10 / PK
G 039-139-12 Downspout End Cap Fitting Beige (1 Piece) 10 / PK
H 039-163-10 Downspout to 4” Round Adapter White Each
H 039-163-11 Downspout to 4” Round Adapter Brown Each
H 039-163-12 Downspout to 4” Round Adapter Brown Each
H 039-164-10 Downspout to 3” Round Adapter White Each
H 039-164-11 Downspout to 3” Round Adapter Brown Each
H 039-164-12 Downspout to 3” Round Adapter Brown Each
D
C
A
H
G
F
E
SEC
TIO
N 8
PLA
STIC
& S
TEEL
IN
STA
LLA
TIO
NP
RO
DU
CTS
FO
R F
IBER
OP
TIC
CA
BLE
Multilink’s Installation & Construction Catalog
Terms And Conditions Of SalePrice and Payment: All prices, unless otherwise stated, are F.O.B. shipping point and are exclusive of any federal, state, local or other taxes. Any applicable taxes are
the responsibility of the Purchaser and shall be added to the invoice unless MULTILINK is provided the appropriate, valid exemption certificate by Purchaser. All prices are subject to change without notice. Shipments of ten percent (10%) more or less than the order quantity constitute completed orders, unless previously agreed to by both Purchaser and MULTILINK.
Invoices are payable in full within thirty (30) days following invoice date. A discount of one percent (1%) is allowable on invoices paid within (10) days following invoice date: this discount also applies to those orders shipped C.O.D. or cash in advance. Invoices outstanding past thirty (30) days following invoice date will be subject to a late payment charge of one and one half percent (1-1/2%) per month. Failure to pay any invoice by its due date makes subsequent invoices due immediately regardless of the terms herein. MULTILINK may option to withhold subsequent shipments until the account in question is settled to MULTILINK’S satisfaction.
Acceptance: All orders subject to acceptance by MULTILINK. Once placed and accepted, any order may be cancelled only upon terms exempting MULTILINK against all loss with the consent of MULTILINK.
Title and Risk of Loss: Title and risk of loss on all material sold by MULTILINK shall pass to Purchaser upon delivery of said materials to a common carrier regardless of freight terms stated or method of payment of transportation charges.
Transportation charges: Most shipments are via United Parcel Service and are prepaid and billed; however, MULTILINK reserves the right to specify routing of shipments. Truck shipments will be made prepaid.
Non-conformance return: All materials sold by MULTILINK are non-returnable except for manufacturing defects. Upon receipt of materials, the customer will have 30 days to make a viable claim for non-conformance. Any material shown to MULTILINK’S satisfaction to be non-conforming at time of shipment will be replaced. MULTILINK will then render credit for the returned goods, provided MULTILINK shall not be responsible for claims beyond replacement value of the defective material. Before returning any material, Purchaser must obtain written material return authorization from MULTILINK.
Express warranties: MULTILINK warrants that the goods are free from any material defect in workmanship and materials under normal and proper usage for a period of one year from the date of shipment by MULTILINK. Purchaser acknowledges that no sample or model of the goods, nor any sales literature, proposals, projections, or engineering data regarding the goods are any part of the basis of the bargain between the parties. Purchaser has made, and relies solely upon, its own determination of the suitability, compatibility, performance, and uses of the goods, and acknowledges to MULTILINK that the Purchaser does not rely upon any oral or written representations or statements by MULTILINK regarding the goods, other than as expressly set forth in this Contract.
Disclaimer of Implied Warranties: IN ALL EVENTS, WITH RESPECT TO ALL GOODS SOLD, MULTILINK DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Limitation of Damages: IF MULTILINK BREACHES OR REPUDIATES THIS CONTRACT BY REASON OF ANY DEFECT IN THE GOODS SOLD, THEN PURCHASER IS NOT ENTITLED TO, AND WAIVES ALL RIGHTS TO RECOVER, ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS. Purchaser has carefully considered this limitation and is willing to bear the entire defective.
Purchaser’s Exclusive Remedy: IF MULTILINK BREACHES THE WARRANTY SET FORTH ABOVE, THEN PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS TO DEMAND THAT MULTILINK, AT MULTILINK’S COST, REPAIR THE GOODS, OR REPLACE THE GOODS IF, AFTER A REASONABLE NUMBER OF ATTEMPTS, THEY CANNOT BE REPAIRED. In lieu of making any repair or replacement of the Goods, Multilink may elect to refund the total purchase price, in full satisfaction of all obligations owed to Purchaser by reason of such breach, in which case Multilink’s duty to pay the refund will be conditioned upon Purchaser permitting Multilink to inspect and take possession of the Goods.
Statute of Limitations: The parties desire to reduce the period of limitations to one year. Accordingly, a party must commence a cause of action for a breach of this Contract, including a breach of warranty, within one year after the cause of action has accrued.
Entire Agreement: Any term or condition contained in Purchaser’s purchase order, acknowledgement form, confirmation or any other document issued by Purchaser that conflicts with any term of this Contract, or that adds to MULTILINK’S obligations under this Contract, is not part of this Contract and is not binding upon MULTILINK unless specifically identified and accepted in writing by an officer of MULTILINK. This document, including any attachments, embodies the entire agreement of the parties as to the subject matter contained in this document. There are no promises, terms, conditions, or obligations between the parties regarding the subject matter of this Contract other than those contained in this document, including any attachments. This Contract supersedes all previous communications, representations, or agreements, either verbal or written, between the parties, including any correspondence, proposals, quotes, brochures, samples, models, or specification sheets, or any other oral or written statements or representations made by any MULTILINK salesmen. Accordingly, the parties shall request that any court or tribunal called upon to consider and enforce this Contract strictly apply the “parol evidence” rule. No course of prior dealings between the parties and no usage of trade is relevant to supplement or explain any term of this Contract.
Modification of Contract: No amendment, modification, change or discharge of any term or provision of this Contract will be valid or binding on either party, and no waiver of any of the terms of this Contract will be valid or binding on either party, unless it is in writing and signed by all of the parties; and with respect to MULTILINK, signed by an officer of MULTILINK.
Non-Waiver: Failure of MULTILINK or any of its agents or representatives to comply with any of the terms or conditions herein or failure to properly notify Purchaser of any breach of these conditions shall not be deemed a waiver of any right MULTILINK has to insist upon strict compliance of these terms and conditions in subsequent agreements.
Force Majeur: MULTILINK shall not be liable for any loss, damage, delay, change in shipment schedule or failure to deliver caused by accident, fire, strike, riot, civil commotion, insurrection, war, the elements, embargo, failure of carrier, inability to obtain transportation facilities, government requirements, acts of God or public enemy, previous commitments to customers or limitations on MULTILINK’S or its suppliers’ products or marketing activities or any other cause or contingency beyond MULTILINK’S control.
Freight Policy: Orders are shipped via best method as determined by MULTILINK unless specified by the Customer. Freight bills will be prepaid if shipped via common carrier under the condition that freight bills will be paid in net 7 days per ICC regulations.
Returns must be in original cartons, in resell able condition, and sent prepaid. (If merchandise was shipped to customer via UPS, it must be returned via UPS). All returns must be made within a 60-day limit and are subject to a 25% restocking charge (Special order and custom orders are non-refundable).
Claims for Shortages or Damages: Claims must be made within seven days of invoice date. All freight damages and shortages should be filed with the carrier within seven days.
Back Orders: All back orders will be retained and shipped on arrival unless otherwise notified.
NO SALESMAN, DISTRIBUTOR, REPRESENTATIVE OR OTHER AGENT IS AUTHORIZED BY MULTILINK TO GIVE ANY WARRANTY OR GUARANTEE CONTRARY TO THE STATEMENTS MADE HEREIN.
109