My School District Does Not Have PCB Fluorescent Light
Ballasts
Things You Should Know
Questions to Ask Yourself
What Does That Mean?
• Terms
– Toxic Substance Control Act
TSCA We say Toss-ka
– Resource Conversation and Recovery Act
RCRA We say Rick-rah
District Building Built Before 1980
• I removed our PCB Fluorescent Light Ballasts -
– In the early 1990s as part of an energy upgrade– Removed the ballasts after West Lynn/Wilsonville
School District cried out!– You read EPA’s letter to the Superintendent, dated
February 15, 2000, and did not want EPA to penalize your District
– I just woke up one day and thought it was a good idea– Other reasons
Disposal Records• If You removed leaking PCB ballasts you must have
-
– A TSCA Identification NumberTSCA Form 7710-53 – Not RCRA Form 8700-12
– You have hazardous waste manifests for all shipments to off-site disposal facilities
– You have confirmation samples to show you cleaned up all spills
– You disposed at an approved incinerator– You have a certificate of disposal– You must retain records for 3 years (from July 1 of the following year)
Disposal Records• If you removed intact ballasts with PCBs in the potting
compound and/or PCBs in the surface paint of the ballasts-
– You have a TSCA Identification NumberTSCA Form 7710-53 – Not RCRA Form 8700-
12– You have hazardous waste manifests for all
shipments to off-site disposal facilities– You disposed at an approved incinerator, or– You disposed at an approved TSCA landfill– You have a certificate of disposal– You must retain records for 3 years (from July 1 of the following year)
Disposal Records
• My District does not have all of those documents
– Your District is in violation of the TSCA– Subject to penalties up to $27,500 for each violation
Prohibitions
Now that you removed your PCB ballasts, what is EPA looking for –
1) PCB spills inside light fixturesThese are high risk spills to students in your
schools
2) A plan to clean up these spillsRemove the risk to students
40 CFR § 761.20
Prohibitions and Exceptions
• No persons may use any PCB, or any PCB Item regardless of concentration, in any manner other than in a totally enclosed manner within the United States unless authorized by regulation or EPA approval.
§ 761.20 Prohibitions and Exceptions
There is no authorization for PCBs as a coating on light fixtures, and no authorization for PCB spills
EPA wants to insure that schools do not have PCBs in the light fixtures or on any surfaces in schools
OOPS!
Spill Clean Up
• If you do not have proof of clean up
– You must do a site assessment of your buildings
• Must notify EPA Regional Office – “Self-implementing” remediation plan
(Clean-up plan 30 days prior to the clean-up project)– Dispose of clean-up material at an approved incinerator
(use a hazardous waste manifest)– Post confirmation sampling of the fixture, or
spill location– Submit a closure report to the EPA
Spill Clean Up
• Things to look for in your site assessments
– Tar like material inside or outside the fixtures– Smokey material on the fixtures– Brown molasses-like material on the fixtures
PCBs were 125,000 ppm
PCBs were 70,000 ppm
PCBS were 270,000 ppm
OUCH!
Spill Clean Up
• Spills from leaking fluorescent light ballasts
– If you discover a spill in a fixture after 12/1998• Must notify EPA Regional Office
– “Self-implementing” remediation plan (Clean-up plan 30 days prior to the clean-up project)
– Dispose of clean-up material at an approved incinerator (use a hazardous waste manifest)
– Post confirmation sampling of the fixture– Submit a closure report to the EPA
Reminder
• Your “Self-implementing” remediation plan must address –
– When the clean-up project will start (Notify EPA 30 days before you start)
– What buildings are covered by the project– What level of clean up you will achieve– Who will be doing the clean up
Reminder
• Your “Self-implementing” remediation plan must address – continued
– How will the clean-up material be disposed– When will the project be completed
Reminder
• After the project is completed
– Submit report to EPA• Map of spill locations• Final or confirmation sample results of clean up• Shipping documents for the disposal of the clean-
up debris– Hazardous waste manifest– Certificates of Disposal
Questions
• Contact EPA Region 10 – EPA Web page of forms
• http://www.epa.gov/pcb/data.html
– TSCA Hotline • 202-554-1404 or
E-mail at: [email protected]
– Region 10 • 1-800-424-4EPA
Questions
• Alaska, Idaho, Oregon, Washington
– Dan Duncan - Regional PCB Coordinator - phone - (206) 553-6693
– Bernie Pribish - phone - (206) 553-5293– Ray Nye - phone - (206) 553-4266– Bruce Long – phone – (503) 326-3686