PagePagePagePage 1111 ofofofof 3333
www.atgelectronics.com Toll free: 877-461-5333 E-mail: [email protected]
ATGATGATGATG ElectronicsElectronicsElectronicsElectronics®®®® eLucenteLucenteLucenteLucent™™™™NebulaNebulaNebulaNebula LEDLEDLEDLED GasGasGasGas StationStationStationStation CanopyCanopyCanopyCanopy LightLightLightLight
USERUSERUSERUSER GUIDEGUIDEGUIDEGUIDE
NOTE:NOTE:NOTE:NOTE:
Please read this entire manual prior to installation.
The product must be used in accordance with the voltage and frequency ranges indicated on the driver.
The product is suitable for indoor and outdoor use, and it is moisture proof and dust proof.
Specifications are subject to change without notice. Please visit www.atgelectronics.com for the most
recent user guide.
INCLUDEDINCLUDEDINCLUDEDINCLUDED ININININ THISTHISTHISTHIS BOXBOXBOXBOX
ATG Electronics® eLucent™ Nebula LED Gas Station Canopy Light, 1 PCs
Power Supply, 1 PCs
Accessory Kit, 1 Set
User Guide, 1 Set
UNPACKINGUNPACKINGUNPACKINGUNPACKING
1) Unpack and carefully examine the product and parts for missing and/or damaged items.
2) Report any damage and save all packing materials if any part(s) were damaged during shipping.
3) Do not attempt to use this apparatus if it is damaged.
INSTALLATIONINSTALLATIONINSTALLATIONINSTALLATION INSTRUCTIONSINSTRUCTIONSINSTRUCTIONSINSTRUCTIONS
1) The product is to be installed by a qualified electrician or technician in accordance with relevant local
codes.
2) Due to risk of electric shock, verify that the main power source is turned off prior to and during
installation and maintenance.
MAINTENANCEMAINTENANCEMAINTENANCEMAINTENANCE
1) Use a dry or slightly moistened cloth for cleaning.
2) Never use any chemicals or abrasive materials for cleaning.
INSTALLATIONINSTALLATIONINSTALLATIONINSTALLATION STEPSSTEPSSTEPSSTEPS
1. New Installation
1) Turn off main power before installation.
2) Drill 5 holes through the ceiling over mounting holes on the mental pad.
3) Fit the 4 screw rods on the back of the Nebula LED Gas Station Canopy Light.
4) Fix the Nebula LED Gas Station Canopy Light to the ceiling with nuts and mental pad, then do the
waterproof job.
5) Install the driver box to the Nebula LED Gas Station Canopy Light with screws.
6) Connect the Nebula LED Gas Station Canopy Light to driver LED DC output.
REV1.0
PagePagePagePage 2222 ofofofof 3333
www.atgelectronics.com Toll free: 877-461-5333 E-mail: [email protected]
7) Connect the source VAC to driver VAC in.
8) Use screws to fix the cover and driver box.
PagePagePagePage 3333 ofofofof 3333
www.atgelectronics.com Toll free: 877-461-5333 E-mail: [email protected]
2. Retrofit Installation
1) Turn off main power before installation.
2) Fit the 4 screw rods on the back of the Nebula LED Gas Station Canopy Light.
3) Fix the Nebula LED Gas Station Canopy Light to the ceiling with nuts and mental pad, then do the
waterproof job.
4) Install the driver box to the Nebula LED Gas Station Canopy Light with screws.
5) Connect the Nebula LED Gas Station Canopy Light to driver LED DC output.
6) Connect the source VAC to driver VAC in.
7) Use screws to fix the cover and driver box.
