NEUMO ASEPTIC TECHNOLOGYSTAINLESS SOLUTIONS FOR LIFE
A member of NEUMO Ehrenberg Group
NEUMO Pharmatube
Stainless Steel and Special Alloy for Pharmaceutical, Chemical
and Biotechnological Industry
FittingsandDIN11865
CONTENTS
About NEUMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .00Company Portrait . . . . . . . . . . . . . . . . . . . . . . . . . . . . 00 .01
Fittings DIN11865 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .06Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 .01Elbows form BL-90 and BL-45 . . . . . . . . . . . . . . . . . . 06 .02Tee-Pieces form T and TK . . . . . . . . . . . . . . . . . . . . . . 06 .03Reducers form RK and RE . . . . . . . . . . . . . . . . . . . . . 06 .04
Pharmaceutical Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07 .01Pharmaceutical Tubing . . . . . . . . . . . . . . . . . . . . . . . . 07 .02
Table of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Table of Materials (chem . analysis) . . . . . . . . . . . . . . 11 .01
High-Performance Materials and Custom Design . . . . . .14Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 .01High-Performance Materials and Custom Design . 14 .02
Catalogue Download (PDF)
Subject to technical modifications
equipped with components, apparatuses and tubes supplied by the NEUMO Ehrenberg Group. The production site in Knittlingen is specialised in the development and production of sterile applications, pooling its expertise in the fabrication of high-alloy stainless steels, corrosion resistant duplex steels and nickel-base alloys. The product range includes special tubing grades, couplings, all kinds of fittings and equipment as well as fabrication to drawing.Furthermore, NEUMO is a significant OEM manufacturer of pharmaceutical vessels and fermenters and a major supplier of equipment such as aseptic heat exchangers.
NEUMO has taken over technological leadership with innovative and unique solu-tions such as elastomer-free coupling as well as the CleanLip technology. These innovations led for example to the aseptic couplings which have gone from strength to strength in red biotechnology, marketed under the brand names BioConnect®, ConnectS® and BioControl® .
Components, equipment and tubes - made of stainless steel and special alloysNEUMO in Knittlingen was founded by Senator Henry J. Ehrenberg in 1947. The young enterprise quickly became a leading supplier of components for the food processing industry.
NEUMO is the parent company of an owner-managed group of companies with more than 1.900 employees. Today, NEUMO is the leader in technology regarding components, vessels, assemblies and apparatuses, made of stainless steel and special alloys for the fluid handling, used in the significant prodction processes of the pharmaceutical industry, biotechnology, chemical industry and semiconductor technology.
NEUMO – Product Innovations for Tomorrow‘s MarketsWhen biosciences really started to take off in the 1970s and the triumph of biotechnology appeared to be inevitable, NEUMO made an important strategic decision: to shift its focus on aseptic technology. A successful move as it turned out, since today the majority of all biopharmaceuticals is made in plants
Innovations in Stainless Steel – since 1947
00.01.01
DIN11865Fittings for Aseptic, Chemical and Pharmaceutical Industry
Reducers
Elbows Tee-Pieces1 .4435 1 .4404
1 .4539
Hygienic Classes DIN11865
Hygienic class Ra internal surfaceRa longitudinal
seam area / internal forming area
External surface
H1 HE1b <1,60µm <3,20µm As produced, without
specification re . finish quality or
polished / precision turned Ra<1,0µma
H2 HE2b <0,80µm <1,60µm
H3 HE3b <0,80µm <0,80µm
H4 HE4b <0,40µm <0,40µm
H5 HE5b <0,25µm <0,25µm
a Fittings of an external surface Ra<1,0µm are marked with an additional “o“, for example H3o. The surface quality with regard to roughness does not apply for the marking area.b Electropolished in compliance with a defined procedure with a mimimum surface removal of 20µm.
06.01.02
Elbow DIN11865, Form BL-90 and BL-45
06.02.01
Technical Data
Material* 1.4435
NormDIN11865
(actual version)
Design BL
Surface finish(standard of stock)*
H3o
HE3o
H4oHE4o
DF-class* 3 (<0,5%)
Connections*
Orbital welding ends in ac-cordance with DIN11865 line A (DIN), line B (ISO), line C (ASME-BPE)
* Alternative material grades (such as 1.4539, 2.4602, 2.4605, etc.), different surface qualities and connections as well as customised elbows (88°, 92°, 30°, 60°, etc.), also with special radii, are available on request.
Elbow 45°, form BL Elbow 90°, form BL
Elbow DIN11865, form BL-45
Elbow DIN11865, form BL-90
Elbow DIN11865, Form BL-90 and BL-45
Elbow DIN11865, form BL-90 and BL-45, tube dimensions in accordance with DIN11866 line A
DN d s R l1 l2 l3
6 8 1 20 45 33,3 25
8 10 1 25 50 35,4 25
10 13 1,5 26 51 35,8 25
15 19 1,5 35 60 39,5 25
20 23 1,5 40 65 41,6 25
25 29 1,5 50 90 60,7 40
32 35 1,5 55 95 62,8 40
40 41 1,5 60 100 64,9 40
50 53 1,5 70 110 69,0 40
65 70 2 80 120 73,1 40
80 85 2 90 145 92,3 55
100 104 2 100 155 96,4 55
125 129 2 187,5 270 160,2 82,5
150 154 2 225 325 193,2 100
200 204 2 300 400 224,3 100
Elbow DIN11865, form BL-90 and BL-45, tube dimensions in accordance with DIN11866 line B
DN d s R l1 l2 l3
6 10,2 1,6 20 45 33,3 25
8 13,5 1,6 20 45 33,3 25
10 17,2 1,6 28 53 36,6 25
15 21,3 1,6 30 55 37,4 25
20 26,9 1,6 28,5 68,5 51,8 40
25 33,7 2 38 78 55,7 40
32 42,4 2 47,5 87,5 59,7 40
40 48,3 2 57 97 63,6 40
50 60,3 2 76 116 71,5 40
65 76,1 2 95 150 94,4 55
80 88,9 2,3 114,5 169,5 102,4 55
100 114,3 2,3 152,5 207,5 118,2 55
125 139,7 2,6 190,5 245,5 133,9 55
150 168,3 2,6 228,5 283,5 149,7 55
200 219,1 2,6 305 385 206,3 80
Elbow DIN11865, form BL-90 and BL-45, tube dimensions in accordance with DIN11866 line C
DN d s R l1 l2 l3 / 90° l3 / 45°
1/4" 6,35 0,89 14,3 66,7 50,8 52,4 44,9
3/8" 9,53 0,89 28,6 66,7 50,8 38,1 39
1/2" 12,7 1,65 28,6 76,2 57,2 47,6 45,4
3/4" 19,05 1,65 28,6 76,2 57,2 47,6 45,4
1" 25,4 1,65 38,1 76,2 57,2 38,1 41,4
1 1/2" 38,1 1,65 57,2 95,3 63,5 38,1 39,8
2" 50,8 1,65 76,2 120,7 76,2 44,5 44,6
2 1/2" 63,5 1,65 95,3 139,7 85,7 44,4 46,2
3" 76,2 1,65 114,3 158,8 92,1 44,5 44,8
4" 101,6 2,11 152,4 203,2 114,3 50,8 51,2
6" 152,4 2,77 228,6 292,1 158,8 63,5 64,1
06.02.02
Tee-Piece equal / reduced DIN11865, Form T and TK
Technical Data
Material* 1.4435
NormDIN11865
(actual version)
Design T short outlet
TK long outlet
Surface finish(standard of stock)*
H3oHE3o
Connections*
Orbital welding ends in accordance with DIN11865 line A (DIN), line B (ISO), line C (ASME-BPE)
* Alternative material grades (such as 1.4539, 2.4602, 2.4605, etc.), different surface qualities and connections as well as customised components (exit 45°, etc.) are available on request.
Reduced Tee-Pieceform TK
Reduced Tee-Pieceform T
Tee-Pieceform TK
Tee-Pieceform T
Tee-Pieceform T
Tee-Pieceform TK
Reduced Tee-Pieceform T
Reduced Tee-Pieceform TK
06.03.01
Tee-Piece equal / reduced DIN11865, Form T and TK
Tee-Piece equal / reduced DIN11865, form T and TK, tube dimensions in accordance with DIN11866 line A
DN d1 s1 d2 s2 L lo l26 8 1 8 1 60 30 30
8 / 6 10 1 8 1 60 30 308 10 1 10 1 60 30 30
10 / 6 13 1,5 8 1 60 30 3010 / 8 13 1,5 10 1 60 30 30
10 13 1,5 13 1,5 70 35 3515 / 8 19 1,5 10 1 70 35 35
15 / 10 19 1,5 13 1,5 70 35 3515 19 1,5 19 1,5 70 35 35
20 / 10 23 1,5 13 1,5 80 40 4020 / 15 23 1,5 19 1,5 80 40 40
20 23 1,5 23 1,5 80 40 4025 / 15 29 1,5 19 1,5 100 50 5025 / 20 29 1,5 23 1,5 100 50 50
25 29 1,5 29 1,5 100 50 5032 / 15 35 1,5 19 1,5 110 55 5532 / 20 35 1,5 23 1,5 110 55 5532 / 25 35 1,5 29 1,5 110 55 55
32 35 1,5 35 1,5 110 55 5540 / 20 41 1,5 23 1,5 120 60 6040 / 25 41 1,5 29 1,5 120 60 6040 / 32 41 1,5 35 1,5 120 60 60
40 41 1,5 41 1,5 120 60 6050 / 25 53 1,5 29 1,5 160 80 8050 / 32 53 1,5 35 1,5 160 80 8050 / 40 53 1,5 41 1,5 160 80 80
50 53 1,5 53 1,5 160 80 8065 / 32 70 2 35 1,5 210 105 8065 / 40 70 2 41 1,5 210 105 8060 / 50 70 2 53 1,5 210 105 80
65 70 2 70 2 210 105 10580 / 40 85 2 41 1,5 260 130 10580 / 50 85 2 53 1,5 260 130 10580 / 65 85 2 70 2 260 130 105
80 85 2 85 2 260 130 130100 / 50 104 2 53 1,5 310 155 130100 / 65 104 2 70 2 310 155 130100 / 80 104 2 85 2 310 155 130
100 104 2 104 2 310 155 155125 / 65 129 2 70 2 375 187,5 155125 / 80 129 2 85 2 375 187,5 155
125 / 100 129 2 104 2 375 187,5 155125 129 2 129 2 375 187,5 187,5
150 / 80 154 2 85 2 450 225 187,5150 / 100 154 2 104 2 450 225 187,5150 / 125 154 2 129 2 450 225 187,5
150 154 2 154 2 450 225 225200 / 100 204 2 104 2 600 300 225200 / 125 204 2 129 2 600 300 225200 / 150 204 2 154 2 600 300 225
200 204 2 204 2 600 300 300
06.03.02
Tee-Piece equal / reduced DIN11865, form T and TK, tube dimensions in accordance with DIN11866 line B
DN d1 s1 d2 s2 L lo l26 10,2 1,6 10,2 1,6 60 30 30
8 / 6 13,5 1,6 10,2 1,6 64 32 328 13,5 1,6 13,5 1,6 64 32 32
10 / 6 17,2 1,6 10,2 1,6 68 34 3410 / 8 17,2 1,6 13,5 1,6 68 34 34
10 17,2 1,6 17,2 1,6 68 34 3415 / 6 21,3 1,6 10,2 1,6 72 36 3615 / 8 21,3 1,6 13,5 1,6 72 36 36
15 / 10 21,3 1,6 17,2 1,6 72 36 3615 21,3 1,6 21,3 1,6 72 36 36
20 / 8 26,9 1,6 13,5 1,6 110 55 5520 / 10 26,9 1,6 17,2 1,6 110 55 5520 / 15 26,9 1,6 21,3 1,6 110 55 55
20 26,9 1,6 26,9 1,6 110 55 5525 / 10 33,7 2 17,2 1,6 120 60 6025 / 15 33,7 2 21,3 1,6 120 60 6025 / 20 33,7 2 26,9 1,6 120 60 60
25 33,7 2 33,7 2 120 60 6032 / 15 42,4 2 21,3 1,6 130 65 6532 / 20 42,4 2 26,9 1,6 130 65 6532 / 25 42,4 2 33,7 2 130 65 65
32 42,4 2 42,4 2 130 65 6540 / 20 48,3 2 26,9 1,6 130 65 6540 / 25 48,3 2 33,7 2 130 65 6540 / 32 48,3 2 42,4 2 130 65 65
40 48,3 2 48,3 2 130 65 6550 / 25 60,3 2 33,7 2 180 90 9050 / 32 60,3 2 42,4 2 180 90 9050 / 40 60,3 2 48,3 2 180 90 90
50 60,3 2 60,3 2 180 90 9065 / 32 76,1 2 42,4 2 220 110 9065 / 40 76,1 2 48,3 2 220 110 9065 / 50 76,1 2 60,3 2 220 110 90
65 76,1 2 76,1 2 220 110 11080 / 40 88,9 2,3 48,3 2 260 130 11080 / 50 88,9 2,3 60,3 2 260 130 11080 / 65 88,9 2,3 76,1 2 260 130 110
80 88,9 2,3 88,9 2,3 260 130 130100 / 50 114,3 2,3 60,3 2 320 160 130100 / 65 114,3 2,3 76,1 2 320 160 130100 / 80 114,3 2,3 88,9 2,3 320 160 130
100 114,3 2,3 114,3 2,3 320 160 160125 / 65 139,7 2,6 76,1 2 400 200 160125 / 80 139,7 2,6 88,9 2,3 400 200 160
125 / 100 139,7 2,6 114,3 2,3 400 200 160125 139,7 2,6 139,7 2,6 400 200 200
150 / 80 168,3 2,6 88,9 2,3 500 250 200150 / 100 168,3 2,6 114,3 2,3 500 250 200150 / 125 168,3 2,6 139,7 2,6 500 250 200
150 168,3 2,6 168,3 2,6 500 250 250200 / 100 219,1 2,6 114,3 2,3 600 300 250200 / 125 219,1 2,6 139,7 2,6 600 300 250200 / 150 219,1 2,6 168,3 2,6 600 300 250
200 219,1 2,6 219,1 2,6 600 300 300
Tee-Piece equal / reduced DIN11865, Form T and TK
06.03.03
Tee-Piece equal / reduced DIN11865, Form T and TK
Tee-Piece equal / reduced DIN11865, form T and TK, tube dimensions in accordance with DIN11866 line C
DN d1 s1 d2 s2 L lo l2
1/4" 6,35 0,89 6,35 0,89 89 44,5 44,53/8" / 1/4" 9,53 0,89 6,35 0,89 89 44,5 44,5
3/8" 9,53 0,89 9,53 0,89 89 44,5 44,51/2" / 1/4" 12,7 1,65 6,35 0,89 95,2 47,6 47,61/2" / 3/8" 12,7 1,65 9,53 0,89 95,2 47,6 47,6
1/2" 12,7 1,65 12,7 1,65 95,2 47,6 47,63/4" / 3/8" 19,05 1,65 9,53 0,89 101,6 50,8 50,83/4" / 1/2" 19,05 1,65 12,7 1,65 101,6 50,8 50,8
3/4" 19,05 1,65 19,05 1,65 101,6 50,8 50,81" /1/2" 25,4 1,65 12,7 1,65 108 54 541" / 3/4" 25,4 1,65 19,05 1,65 108 54 54
1" 25,4 1,65 25,4 1,65 108 54 541 1/2" / 3/4" 38,1 1,65 19,05 1,65 120,6 60,3 60,31 1/2" / 1" 38,1 1,65 25,4 1,65 120,6 60,3 60,3
1 1/2" 38,1 1,65 38,1 1,65 120,6 60,3 60,32" / 1" 50,8 1,65 25,4 1,65 146 73 66,7
2" / 1 1/2" 50,8 1,65 38,1 1,65 146 73 66,72" 50,8 1,65 50,8 1,65 146 73 73
2 1/2" / 1 1/2" 63,5 1,65 38,1 1,65 158,8 79,4 732 1/2" / 2" 63,5 1,65 50,8 1,65 158,8 79,4 73
2 1/2" 63,5 1,65 63,5 1,65 158,8 79,4 79,43" / 1 1/2" 76,2 1,65 38,1 1,65 171,4 85,7 79,4
3" / 2" 76,2 1,65 50,8 1,65 171,4 85,7 79,43" / 2 1/2" 76,2 1,65 63,5 1,65 171,4 85,7 79,4
3" 76,2 1,65 76,2 1,65 171,4 85,7 85,74" / 2" 101,6 2,11 50,8 1,65 209,6 104,8 98,4
4" / 2 1/2" 101,6 2,11 63,5 1,65 209,6 104,8 98,44" / 3" 101,6 2,11 76,2 1,65 209,6 104,8 98,4
4" 101,6 2,11 101,6 2,11 209,6 104,8 104,86" / 3" 152,4 2,77 76,2 1,65 185,8 142,9 123,86" / 4" 152,4 2,77 101,6 2,11 185,8 142,9 130,2
6" 152,4 2,77 152,4 2,77 185,8 142,9 142,9
06.03.04
Reducer concentric form RK
Reducers DIN11865, Form RK and RE
Reducer eccentricform RE
Reducer eccentricform RE
Reducer concentricform RKTechnical Data
Material* 1.4435
NormDIN11865
(actual version)
Design RK concentricRE eccentric
Surface finish(standard of stock)*
H3o
DF-class* DF3 (<0,5%)
Connections*
Orbital welding ends in accordance with DIN11865 line A (DIN), line B (ISO), line C (ASME-BPE)
* Alternative material grades (such as 1.4539, 2.4602, 2.4605, etc.), different surface qualities and connections as well as customised components (adaptors etc.) are available on request.
06.04.01
Reducers DIN11865, Form RK and RE
Reducers DIN11865, form RK and RE, tube dimensions in accordance with DIN11866 line A
DN d1 s1 d2 s2 L l1 l28 / 6 10 1 8 1 38 19 19
10 / 6 13 1,5 8 1 38 19 1910 / 8 13 1,5 10 1 38 19 1915 / 8 19 1,5 10 1 60 25 25
15 / 10 19 1,5 13 1,5 60 25 2520 / 10 23 1,5 13 1,5 60 25 2520 / 15 23 1,5 19 1,5 60 25 2525 / 15 29 1,5 19 1,5 70 25 2525 / 20 29 1,5 23 1,5 70 25 2532 / 20 35 1,5 23 1,5 80 30 2532 / 25 35 1,5 29 1,5 80 30 2540 / 20 41 1,5 23 1,5 90 30 2540 / 25 41 1,5 29 1,5 90 30 2540 / 32 41 1,5 35 1,5 90 30 3050 / 25 53 1,5 29 1,5 90 30 2550 / 32 53 1,5 35 1,5 90 30 3050 / 40 53 1,5 41 1,5 90 30 3065 / 40 70 2 41 1,5 110 40 3065 / 50 70 2 53 1,5 110 40 3080 / 50 85 2 53 1,5 110 40 3080 / 65 85 2 70 2 110 40 40
100 / 65 104 2 70 2 135 40 40100 / 80 104 2 85 2 135 40 40125 / 80 129 2 85 2 150 55 40
125 / 100 129 2 104 2 150 55 40150 / 100 154 2 104 2 170 55 40150 / 125 154 2 129 2 170 55 55200 / 125 204 2 129 2 230 55 55
200 / 150 204 2 154 2 230 55 55
06.04.02
Reducers DIN11865, form RK and RE, tube dimensions in accordance with DIN11866 line B
DN d1 s1 d2 s2 L l1 l28 / 6 13,5 1,6 10,2 1,6 38 19 19
10 / 6 17,2 1,6 10,2 1,6 60 25 2510 / 8 17,2 1,6 13,5 1,6 60 25 2515 / 8 21,3 1,6 13,5 1,6 60 25 25
15 / 10 21,3 1,6 17,2 1,6 60 25 2520 / 10 26,9 1,6 17,2 1,6 60 25 2520 / 15 26,9 1,6 21,3 1,6 60 25 2525 / 15 33,7 2 21,3 1,6 70 30 2525 / 20 33,7 2 26,9 1,6 70 30 2532 / 20 42,2 2 26,9 1,6 80 30 2532 / 25 42,2 2 33,7 2 80 30 3040 / 20 48,3 2 26,9 1,6 90 30 2540 / 25 48,3 2 33,7 2 90 30 3040 / 32 48,3 2 42,4 2 90 30 3050 / 25 60,3 2 33,7 2 100 30 3050 / 32 60,3 2 42,4 2 100 30 3050 / 40 60,3 2 48,3 2 100 30 3065 / 40 76,1 2 48,3 2 110 40 3065 / 50 76,1 2 60,3 2 110 40 3080 / 50 88,9 2,3 60,3 2 110 40 3080 / 65 88,9 2,3 76,1 2 110 40 40
100 / 65 114,3 2,3 76,1 2 135 40 40100 / 80 114,3 2,3 88,9 2,3 135 40 40125 / 80 139,7 2,6 88,9 2,3 150 55 40
125 / 100 139,7 2,6 114,3 2,3 150 55 40150 / 100 168,3 2,6 114,3 2,3 170 55 55150 / 125 168,3 2,6 139,7 2,6 170 55 55200 / 125 219,1 2,6 139,7 2,6 230 55 55
200 / 150 219,1 2,6 168,3 2,6 230 55 55
Reducers DIN11865, Form RK and RE, tube dimensions in accordance with DIN11866 Reihe C
DN d1 s1 d2 s2 L l1 l23/8" / 1/4" 9,53 0,89 6,35 0,89 41,28 19,05 19,051/2" / 1/4" 12,7 1,65 6,35 0,89 47,63 25,4 19,051/2" / 3/8" 12,7 1,65 9,53 0,89 47,63 25,4 19,053/4" / 3/8" 19,05 1,65 9,53 0,89 50,8 25,4 19,053/4" / 1/2" 19,05 1,65 12,7 1,65 53,98 25,4 25,41" / 1/2" 25,4 1,65 12,7 1,65 63,5 25,4 25,41" / 3/4" 25,4 1,65 19,05 1,65 53,98 25,4 25,4
1 1/2" / 3/4" 38,1 1,65 19,05 1,65 76,2 25,4 25,41 1/2" / 1" 38,1 1,65 25,4 1,65 63,5 25,4 25,4
2" / 1" 50,8 1,65 25,4 1,65 85,73 25,4 25,42" / 1 1/2" 50,8 1,65 38,1 1,65 63,5 25,4 25,4
2 1/2" / 1 1/2" 63,5 1,65 38,1 1,65 85,73 25,4 25,42 1/2" / 2" 63,5 1,65 50,8 1,65 63,5 25,4 25,43" / 1 1/2" 76,2 1,65 38,1 1,65 107,95 38,1 25,4
3" / 2" 76,2 1,65 50,8 1,65 85,73 38,1 25,43" / 2 1/2" 76,2 1,65 63,5 1,65 66,68 38,1 25,4
4" / 2" 101,6 2,11 50,8 1,65 130,18 38,1 25,44" / 2 1/2" 101,6 2,11 63,5 1,65 107,95 38,1 25,4
4" / 3" 101,6 2,11 76,2 1,65 98,43 38,1 38,16" / 3" 152,4 2,77 76,2 1,65 184,15 50,8 38,1
6" / 4" 152,4 2,77 101,6 2,11 142,88 50,8 38,1
Reducers DIN11865, Form RK and RE
06.04.03
For many years, our engineers and technicians have been playing an active role in all important German, European and Amercian standardisation committees, such as DIN or ASME-BPE. Therefore, NEUMO is centrally involved in the standardisation of pharmaceutical tubing.
NEUMO‘s activities are focussing on tubing for Pharmaceutical, Chemical and Biotechnologi-cal use as well as for other critical applica-tions. Today, NEUMO keeps one of the largest and most wide-ranging warehouses throug-hout the world. Furthermore, an optimum availability is guaranteed by means of many additional warehouses throughout Europe, Switzerland, China, Vietnam, Israel and the U.S, including customised designs and special materials. We cooperate with the leading tube mills throughout Europe and the U.S. producing our tubes in accordance with our specifications. They are marketed under the following brand names:
• NEUMO Pharmatube ECO
• NEUMO Pharmatube S
• NEUMO Pharmatube XS
• NEUMO Pharmatube BPE
• NEUMO PharmAlloy 1.4539
• NEUMO PharmAlloy AL-6XN®
• NEUMO Alloy C-22
Working exclusively with just a few selected, certified tube mills audited by renowned pharmaceutical enterprises enables us to safeguard the highest standards of quality assurance.
NEUMO PharmatubeStainless Steel and Special Alloy Tubes for Pharmaceutical, Chemical and Biotechnological Industry
07.01.01
NEUMO Pharmatube XSNorm: DIN11866Design: Welded (small diameters partly seamless) Material: 1.4435 / 316LHygienic classes: H4o (interior Ra<0,4µm)
optional: HE4oDelta ferrite content: Max. 0,5% (DF3)External surface: Mechanical polished, seamless design
bright annealed / shiny metallicRegulation: AD2000-W2
NEUMO Pharmatube SNorm: DIN11866Design: Welded (small diameters partly seamless) Material: 1.4435 / 316L
1.4404 / 316LHygienic classes: H3o (internal Ra<0,8µm)
Optional: HE3oDelta ferrite content: Max. 0,5% (DF3)External surface: Mechanical polishedRegulation: AD2000-W2
NEUMO Pharmatube ECONorm: DIN11866Design: Welded (small diameters partly seamless) Material: 1.4404 / 316LHygienic classes: H2 (internal Ra<0,8µm, near welding seam:
Ra<1,6µm)Optional: H2o, HE2, HE2o
External surface: Pickled or bright annealedRegulation: AD2000-W2
NEUMO Pharmatube BPENorm: ASME-BPEDesign: Welded (1/4 “- 3/4“ also as seamless design)Material: 316LHygienic classes: SF1 (internal Ra<0,51µm mechanical polished)
SF4 (internal Ra<0,38µm electropolished),External surface: Mechanical polished, seamless design pickled
Optional: bright annealed / shiny metallic Regulation: ASTM A249/269/270/S2
NEUMO Pharmatube
07.02.01
NEUMO PharmAlloy 1.4539Norm: DIN11866 (from stock in line B, further dimensions on request)Design: Welded (small diameters mainly seamless)Material: 1.4539 / 904LHygienic classes: H3 (internal Ra<0,8µm)Optionally available: H2, H2o, H3o, HE3, HE3o, further surface classes available on requestDelta ferrite content: Max. 0,5% (DF3)External surface: Pickled or bright annealed / shiny metallic Optional: mechanical polishedRegulation: AD2000-W2
NEUMO PharmAlloy AL-6XN®*Welding ends: ASME-BPEDesign: Welded (small diameters partly seamless) Material: AL-6XN® (complies to 1.4529)Hygienic classes: Internal Ra<0,8µm Internal Ra<0,6µm electropolished, further surface classes on requestExternal surface: Pickled or bright annealed/shiny metallic Optional: mechanical polished
* AL-6XN® is a registered trademark of ATI Properties, Inc
NEUMO Alloy C-22Welding ends: ASME-BPE ANSI Schedule10, further dimensions on requestDesign: Welded (small diameters partly seamless)Material: 2.4602 / Hastelloy C-22Hygienic classes: Internal Ra<0,8µm (further surface classes available, also without surface specifications)External surface: Pickled or bright annealed / shiny metallic, Optional: mechanical polishedNotification: Slight deviations from the Ra value may occur in the welding area due to the difficult grinding process of this material. We reserve the right to deliver the tubes in in short lengths of 1,0 - 2,0m.
We are pleased to offer you a huge number of further dimensions, materials
(such as SMO 254, C-276, titanium and many more) and surface qualities on
request, be it an external diameter of 3mm, 1219mm or larger, no internal
Ra-requirements or Ra<0,1µm electropolished - just contact us .
NEUMO Pharmatube
07.02.02
11.01.01
Table of Materials
EN TypeC ≤ %
Cr %
Ni %
Mo %
Si ≤%
Mn ≤ %
S ≤ %
P ≤ %
otherComparable
material AISI
Comparable material
SS
1.4301
austenite
0,07 17,5-19,58,0-10,5
- 1,0 2,0 0,015 0,045 N ≤ 0,11 304 2333
1.4306 0,03 18,0-20,0 10,0-12,0 - 1,0 2,0 0,015 0,045 N ≤ 0,11 304L 2352
1.4307 0,03 17,5-19,5 8,0-10,5 - 1,0 2,0 0,015 0,045 N ≤ 0,11 304L -
1.4541 0,08 17,0-19,0 9,0-12,0 - 1,0 2,0 0,015 0,045 Ti (5xC)-0,70 321 2337
1.4401
austenite(acid-
resistant)
0,07 16,5-18,5 10,0-13,0 2,0-2,5 1,0 2,0 0,015 0,045 N ≤ 0,11 316 2347
1.4404 0,03 16,5-18,5 10,0-13,0 2,0-2,5 1,0 2,0 0,015 0,045 N ≤ 0,11 316L 2348
1.4432 0,03 16,5-18,5 10,5-13,0 2,5-3,0 1,0 2,0 0,015 0,045 N ≤ 0,11 316L 2353
1.4435 0,03 17,0-19,0 12,5-15,0 2,5-3,0 1,0 2,0 0,015 0,045 N ≤ 0,11 316L 2353
1.4539 0,02 19,0-21,0 24,0-26,0 4,0-5,0 0,7 2,0 0,015 0,030 N ≤ 0,15; Cu 1,20-2,00 904L 2562
1.4571 0,08 16,5-18,5 10,5-13,5 2,0-2,5 1,0 2,0 0,015 0,045 Ti (5xC)-0,70 316Ti 2350
1.4529 Super-austenite(6-Moly)
0,02 20,0-21,0 24,5-25,5 6,0-6,8 0,5 1,0 0,005 0,030N 0,18-0,2%, Cu 0,8-
1,0%AL-6XN® -
1.4547 0,02 19,5-20,5 17,5-18,5 6,0-7,0 0,7 1,0 0,010 0,030N 0,18-0,25%, Cu 0,5-
1,0%UNS S 31254
254 SMO
1.4462 Duplex 0,03 21,0-23,0 4,5-6,5 2,5-3,5 1,0 2,0 0,015 0,035 N 0,10-0,22 UNS S 31803 2377
1.4501Super-duplex
0,03 24,0-26,0 6,0-8,0 3,0-4,0 1,0 1,0 0,015 0,035N 0,20-0,30%, Cu 0,5-
1,0%, W 2,5-3,5%UNS S 32760 -
1.4410 0,03 24,0-26,0 6,0-8,0 3,5-5,0 1,0 1,0 0,015 0,035 N 0,24-0,32% UNS S 32750 -
2.4602
nickel-base alloy
0,01 20,0-22,5Rest ( ca.
60%)12,5-14,5 0,08 0,5 0,010 0,025
Fe 2-6%,W 2,5-3,5%, Co ≤ 2,5%
HastelloyC-22
-
2.4605 0,01 22,0-24,0Rest ( ca.
60%)15,0-16,0 0,1 0,5 0,015 0,025
Fe ≤ 1,5%, Cu ≤ 0,5%, Co ≤ 0,3%
Alloy 59 -
2.4610 0,009 14,5-17,5Rest ( ca.
65%)14,0-17,0 0,05 1,0 0,010 0,020
Fe ≤ 3,0%, Ti ≤ 0,7%, Co ≤ 2,0%
HastelloyC4
-
2.4819 0,01 14,5-16,5Rest ( ca.
58%)15,0-17,0 0,08 1,0 0,010 0,025
Fe 4-7%,W 3,0-4,5%, Co ≤ 2,5%
HastelloyC-276
-
All information supplied without warranty
High-performance Materials and Custom Design
Over many years NEUMO has increasingly specialised in special materials and special design. Today we dominate the market as a competent reference and warehouse keeper for special alloys. Furthermore we are a supplier of high quality special design.
The product range includes the production of components fabricated to drawing as well as tubes and standardised fittings (for example DIN11865 and ASME-BPE) in special alloys.
In addition, we offer our patented products BioConnect®, ConnectS®, BioControl® and BioFlow check valves in special materials.
Our offered product portfolio is rounded off by our range of semi-finished products, such as sheets, bar steel and cuttings in standard or special materials.
14.01.01
High-performance Materials and Custom Design
Distribution Pipes
Customised Construction
Customised Connections
Customised Fittings
. . . designed and manufactured with support of your specialist engineers!
Reducer Elbows
14.02.01
High-performance Materials and Custom Design
1.4539/904L
AL-6XN ®
2.4602/C-22
2.4605/Alloy 59
2.4610/C-4
2.4819/C-276
1.4462
Titanium
...
• Tubes
• Fittings(standard + custom)
• Tube Connections(standard + custom)
• Customised Machined Items
• Prefabricated Spools
• Distribution Pipes
• Customised Constructions
• Process Equipment
• Bar Steel
• Sheets
• Cuttings
• and many more ...
14.02.02
NEUMO GmbH + Co . KGHenry-Ehrenberg-PlatzD-75438 KnittlingenTelefon: +49 7043 36-0Telefax: +49 7043 36-130E-Mail: [email protected]
NEUMO worldwide
The NEUMO Ehrenberg Group is a privately owned and managed multi-national corporate group with more than 1.900 employees.
Founded in 1947, NEUMO, the group‘s parent company, now produces, manufactures and supplies fittings, equipment and tubes made from stainless steel as well as corrosion-resistent special alloys for the pharmaceutical, biotechnology, chemical and semiconindustries.
NEUMO products provide a significant contribution to safety and integrity of production processes.
AgenciesSubsidiaries
EN-2
015-
06