Next Generation IoT Systems
RRU 4000 RFID Reader unitARU 3000 RFID Antenna Reader unit
Kathrein RFID, Kronstaudener Weg 1, 83071 Stephanskirchen, GermanyPhone: +49 8036 90831 20 I Fax: +49 8036 90831 69www.kathrein-rfid.de I [email protected] 93
6B10
1116
I S
ubje
ct to
cha
nges
date
of c
reat
ion:
10.
11.2
016
New Products I Features I 2 of 2
Version ETSI Order no.
RRU4400
RRU4500
RRU4560
RRU4570
ARU3400
ARU3500
ARU3560
ARU3570
52010287 52010288 52010289 52010290 52010291 52010292 52010293 52010294
Version FCC Order no. 52010295 52010296 52010297 52010298 52010299 52010300 52010301 52010302
Basic computing module
Dual corre embedded PC
EthernetNumber of interfaces 1
Number of interfaces 2
GPIO
© KRAI
LED visulatization
WLAN
Bluetooth
2G/3G
Polarization switch antenna
New Generation IoT Systems I Features I 2 of 2
800MHz Linux Industrial PC The integrated high-performance industrial PC with an 800MHz dual core processor allows the direct installation of stan-dardised software, which enables the real-time evaluation and analysis of the RFID raw data and the direct communication with higher-level ERP software.
WLAN - Bluetooth - 2G/3G Network connections cannot always be installed at the desired read points at low costs. To reduce complex infrastructure measures, the new generation offers the possibility to use standardised wireless inter-faces, such as WLAN - Bluetooth BLE or 2G/3G (mobile communication).
PoE+ InterfaceThe power-over-Ethernet technology (PoE+) defines the transmission of data and power to networked devices via a stan-dard Ethernet cable. Separate power supplies are therefore no longer required. The new IEEE 802.3at standard, also known as PoE+, which is designed for higher performance, allows an RFID transmission power of 2W without external power supply.
Ethernet SwitchThe integration of a second network connection, which acts internally as a network switch, allows the integration and net-working of additional external sensors, such as a camera system or code reader.
ProfiNET AppThe ProfiNET app offers an excellent solution for integration into the control world. The functional module can be installed directly on the reader as an app.
TagBlower AppThe TagBlower app enables the simple and unfiltered transmission of the RFID raw data to the network level. This feature can be installed directly on the reader as an app.
© KRAI InterfaceThe intelligent Kathrein RFID Antenna Interface enables the control of up to 32 individual antennas, as well as the alignment of the transmit polarisation to increase the read rate.
>
RRU 4000 and ARU 3000 Reader Overview
Features: