Product code : 9954
Baan code : LKXLDN71L
Size : 100 mm X 67 mm
Backset : 69 mm
Technical data for
night latch 7 lever
(inside opening):
! Entrance doors
! Wood and steel doors
Applications:
! 7 brass levers provide maximum security.
! All the components are made of sheet
metal for maximum strength.
! Scratch-resistant powder-coated body and
reinforced receptacle.
! A safety catch provides added security and
prevents the lock from being opened even
by its own key.
! Can be replaced by Ultra Latch/ Tribolt/
Latchbolt with the help of Ultra Retrofit
Adaptor without altering the holes on the
door.
! Automatic dead-locking which prevents the
latch-notch being forced open from
outside.
! Profiled Latch Bolt to increase strength &
smooth action.
Product Features:
Night Latch7 Lever (Inside Opening)
CM
YK
NOTE: A set of these locks with common key system can be made to order and supplied.
SrN. o.
Material Specifications:
Material FinishComponent
Key thickness : 2.0 mm
Number of levers : 7 as per key combinations
Thickness of levers : 1.4 mm, 1.6 mm
1 Body Steel Powder-coated
2 Bolt head Zinc-based die-cast alloy Bright nickel-chrome-plated
3 Deadlock lever Steel Zinc-plated
4 Safety catch Steel Zinc-plated
5 Torsion spring (bolt) Spring steel --
6 Torsion spring (lever) Spring steel --
7 Knob Zinc-based die-cast alloy Powder-coated
8 Safety catch knob Zinc-based die-cast alloy Powder-coated
9 Receptacle Steel Powder-coated
10 Lock retainer plate Steel Powder-coated
11 Back plate Steel Powder-coated
NIGHT LATCH LOCK ASSEMBLY
12 Lock cover Zinc-based die-cast alloy Bright nickel-chrome-plated
13 Plate Zinc-based die-cast alloy As cast
14 Connector (Flat strip) Steel Zinc-plated
15 Ferrule Brass Nickel-plated
16 Key Brass Nickel-plated
NIGHT LATCH LOCK ASSEMBLY
Net weight (when packed) : 0.900 kg
Lock can be unlatched by key from outside
and by knob from inside.
The safety catch can also be used to hold the
bolt in latched or unlatched position.
Simply close the door to latch.
Bolt gets automatically deadlocked every
time the door is shut preventing the latch bolt
being forced open from outside.
Operation:
Ten locks are packed in 5-ply corrugated box
of
size 370 mm X 163 mm X 180 mm
and weight 9.4 kg.
Standard Packing:
Left and right-handed, inside opening, 32
mm to 45 mm thick doors.
Suitable for:
1. Wood screws: No. 8 X 20 mm 7 Nos.
No. 8 X 45 mm 6 Nos.
Machine screws: 3/16 inch X 3/4 inch 2 Nos.
2. Receptacle
3. Retainer plate
4. 3 keys with key ring
5. Night Latch body assembly
6. Round lock body assembly
7. Fitting instruction slip
All the above listed items are packed in duplex
Packing Contents:
CM
YK
Night Latch 7 Lever
(Inside Opening)Night Latch 7 Lever
(Inside Opening)
Night Latch 7 Lever
(Inside Opening)
Night Latch 7 Lever
(Inside Opening)
NIGHT LATCH BODY ASSEMBLYNIGHT LATCH BODY ASSEMBLY
BACK
Product Features:
! 7 brass levers provide maximum security.
! All the components are made of sheet metal for
maximum strength.
! Scratch-resistant powder-coated body.
! A safety catch provides added security and
prevents the lock from being opened even by its
own key.
! Can be replaced by Ultra Latch/ Tribolt/ Latchbolt
with the help of Ultra Retrofit Adaptor without
altering the holes on the door.
! Automatic dead-locking which prevents the latch-
notch being forced open from outside.
! Profiled Latch Bolt to increase strength & smooth
action.
! Entrance doors
! Wood and steel doors
Applications:
Night Latch7 Lever (OutsideOpening)
Product code : 1872
Baan code : LKXLDN72L
Size : 100 mm X 67 mm
Backset : 69 mm
Technical data for
night latch 7 lever
(outside opening):
CM
YK
NOTE: A set of these locks with common key system can be made to order and supplied.
Ten locks are packed in 5-ply corrugated box
of
size 370 mm X 163 mm X 180 mm
and weight 8.4 kg.
Standard Packing:
1. Wood screws: No. 8 X 20 mm 6 Nos.
No. 8 X 45 mm 4 Nos.
Machine screws: 3/16 inch X 3/4
inch 2 Nos.
2. Striker plate
3. Retainer plate
4. 3 keys with key ring
5. Night Latch body assembly
6. Round lock body assembly
7. Fitting instruction slip
All the above listed items are packed in duplex
Packing Contents:
Left and right-handed, outside opening, 32 mm to
45 mm thick doors.
Suitable for:
Lock can be unlatched by key from outside
and by knob from inside.
The safety catch can also be used to hold
the bolt in latched or unlatched position.
Simply close the door to latch.
Bolt gets automatically deadlocked every
time the door is shut preventing the latch bolt
being forced open from outside.
Operation:
CM
YK
Night Latch 7 Lever (Outside Opening)Night Latch 7 Lever (Outside Opening)Night Latch 7 Lever (Outside Opening)Night Latch 7 Lever (Outside Opening)
SrN. o.
Material Specifications:
Material FinishComponent
Key thickness : 2.0 mm
Number of levers : 7 as per key combinations
Thickness of levers : 1.4 mm, 1.6 mm
Net weight (when packed) : 0.800 kg
1 Body Steel Powder-coated
2 Bolt head Zinc-based die-cast alloy Bright nickel-chrome-plated
3 Deadlock lever Steel Zinc-plated
4 Safety catch Steel Zinc-plated
5 Torsion spring (bolt) Spring steel --
6 Torsion spring (lever) Spring steel --
7 Knob Zinc-based die-cast alloy Powder-coated
8 Safety catch knob Zinc-based die-cast alloy Powder-coated
9 Striker plate Steel Powder-coated
10 Lock retainer plate Steel Powder-coated
11 Back plate Steel Powder-coated
NIGHT LATCH LOCK ASSEMBLY
12 Lock cover Zinc-based die-cast alloy Bright nickel-chrome-plated
13 Plate Zinc-based die-cast alloy As cast
14 Connector (Flat strip) Steel Zinc-plated
15 Ferrule Brass Nickel-plated
16 Key Brass Nickel-plated
NIGHT LATCH LOCK ASSEMBLY
NIGHT LATCH BODY ASSEMBLYNIGHT LATCH BODY ASSEMBLY
BACK
! Entrance doors.
! Wooden doors.
Applications:
IMPORTANT: Do not oil, lubricate or paint the pin cylinder lock.
! Precision 6-hard brass pin tumbler mechanism.
! Latch bolt and dealbolt made of brass
! Double throw of deadbolt provides added security.
! Provides the convenience of a Night Latch plus
security of a deadbolt.
! Nickel-plated brass key.
! Corrosion free brass cylinder for enhanced
durability
Product Features:
Rim lock 1CK (Insideopening)
Product code : 1924 (Beige)
Baan Code : LKYPDR6NO (Beige)
Size : 125 mm X 83 mm X 27 mm
Backset : 60 mm
Latch bolt throw : 14.5 mm
Deadbolt throw : 21 mm
Technical data for
Rim Lock 1CK (Inside opening):
CM
YK
Sr.N o. Material FinishComponent
Material Specifications:
Ten locks are packed in 5-ply box of size 420 mm
X 175 mm X 210 mm and weight 9.6 kg. .
Standard Packing:
1. Pin cylinder lock assembly and rose
2. Receptacle
3. Marker & fitting instruction slip
4. Key - 3 Nos.
5. Rim Lock body assembly
6. Fixing plate with screws
7. Installation screws
All the above listed items are packed
Packing Contents:
Latch bolt is operable from inside by
latch bolt puller and from outside by the
key. It may also be deadlocked and held
back internally by using safety catch
knob.
The deadlock is operable by key from
outside and by knob from inside.
Operation:
1 Body C.R.C.A Steel Powder-coated
2 Receptacle C.R.C.A Steel Powder-coated
3 Cover plate C.R.C.A Steel Powder-coated
4 Deadlock knob Mazak Powder-coated
5 Safety catch knob Mazak Powder-coated
6 Latch bolt Brass (Extruded) Buffed and polished
7 Deadbolt Brass (Extruded) Buffed and polished
8 Latch bolt puller Brass (Extruded) Buffed and polished
9 Retainer/Fixing plate C.R.C.A Steel Galvanised
10 Latch bolt release C.R.C.A Steel Galvanised
11 Follower C.R.C.A Steel Galvanised
12 Deadbolt plates C.R.C.A Steel Galvanised
13 Deadbolt locking plate C.R.C.A Steel Galvanised
14 Driving cam C.R.C.A. Steel sheet Galvanised
15 Latch bolt spring Spring steel --
PIN TUMBLER LOCK ASSEMBLY
16 Cylinder housing Brass Buffed and lacquered
17 Cylinder Brass Polished, buffed and
Lacquered
18 Rose Cold-rolled brass Bright acid dip
PIN TUMBLER LOCK ASSEMBLY
Thickness of key : 2.0 mm
Number of levers : 6 pairs as per key combinations
Net weight : 0.920 kg
Left and right-handed, inside opening, 30
mm to 80 mm thick doors.
Suitable for:
NOTE: A set of these locks with common key system can be made to order and supplied.
CM
YK
Rim Lock 1CK (Inside Opening)Rim Lock 1CK (Inside Opening)Rim Lock 1CK (Inside Opening)Rim Lock 1CK (Inside Opening)
RIM LOCK BODY ASSEMBLYRIM LOCK BODY ASSEMBLY
BACK
! Entrance doors.
! Wooden doors.
Applications:
IMPORTANT: Do not oil, lubricate or paint the pin cylinder lock.
Product code : 1937 (Beige)
Baan Code : LKYPDR6OO (Beige)
Size : 125 mm X 83 mm X 27 mm
Backset : 60 mm
Latch bolt throw : 14.5 mm
Deadbolt throw : 21 mm
Technical data for
Rim lock 1CK (Outside opening):
Rim Lock 1CK (Outsideopening)
Product Features:
! Precision 6-hard brass pin tumbler mechanism.
! Latch bolt and dealbolt made of brass
! Double throw of deadbolt provides added security.
! Provides the convenience of a Night Latch plus security
of a deadbolt.
! Nickel-plated brass key.
! Corrosion free brass cylinder for enhanced durability
CM
YK
Ten locks are packed in 5-ply box
of size 420 mm X 175 mm X 210 mm
and weight 9.5 kg. .
Standard Packing:
1. Pin cylinder lock assembly and rose2. Striker plate3. Marker & fitting instruction slip4. Key - 3 Nos.5. Rim Lock body assembly6. Fixing plate with screws7. Installation screwsAll the above listed items are packed in E-fluted
duplex board box.
Packing Contents:
Latch bolt is operable from inside by
latch bolt puller and from outside by the
key. It may also be deadlocked and held
back internally by using safety catch
knob.
The deadlock is operable by key from
outside and by knob from inside.
Operation:
Left and right-handed, outside opening,
30 mm to 80 mm thick doors.
Suitable for:
1 Body C.R.C.A Steel Powder-coated
2 Striker plate C.R.C.A Steel Powder-coated
3 Cover plate C.R.C.A Steel Powder-coated
4 Deadlock knob Mazak Powder-coated
5 Safety catch knob Mazak Powder-coated
6 Latch bolt Brass (Extruded) Buffed and polished
7 Deadbolt Brass (Extruded) Buffed and polished
8 Latch bolt puller Brass (Extruded) Buffed and polished
9 Retainer/Fixing plate C.R.C.A Steel Galvanised
10 Latch bolt release C.R.C.A Steel Galvanised
11 Follower C.R.C.A Steel Galvanised
12 Deadbolt plates C.R.C.A Steel Galvanised
13 Deadbolt locking plate C.R.C.A Steel Galvanised
14 Driving cam C.R.C.A. Steel sheet Galvanised
15 Latch bolt spring Spring steel --
PIN TUMBLER LOCK ASSEMBLY
16 Cylinder housing Brass Buffed and lacquered
17 Cylinder Brass Polished, buffed and
lacquered
18 Rose Cold-rolled brass Bright acid dip
PIN TUMBLER LOCK ASSEMBLY
Thickness of key : 2.0 mm
Number of levers : 6 pairs as per key
combinations
Sr.N o. Material FinishComponent
Material Specifications:
Net weight : 0.900 kg
NOTE: A set of these locks with common key system can be made to order and supplied.
CM
YK
Rim Lock 1CK (Outside Opening)Rim Lock 1CK (Outside Opening)Rim Lock 1CK (Outside Opening)Rim Lock 1CK (Outside Opening)
RIM LOCK BODY ASSEMBLYRIM LOCK BODY ASSEMBLY
BACK
IMPORTANT: Do not oil, lubricate or paint the pin cylinder lock.
! Precision 6-hard brass pin tumbler mechanism.
! Latch bolt and dealbolt made of brass
! Double throw of deadbolt provides added
security.
! Provides the convenience of a Night Latch plus
security of a deadbolt.
! Nickel-plated brass key.
! Corrosion free brass cylinder for enhanced
durability
Product Features:
! Entrance doors
! Wooden doors
! Single and double-shutter doors
Applications:
Rim Lock 2C (Insideopening)
Technical data for
Rim Lock 2C (Inside opening):
Product code : 1960 (Beige)
Baan code : LKYPDR62C (Beige)
Size : 125 mm X 83 mm X 27 mm
Backset : 60 mm
Latch bolt throw : 14.5 mm
Deadbolt throw : 21 mm
CM
YK
1. Pin cylinder lock assembly and rose.
2. Receptacle 6. Fixing plate with screws
3. Marker & Fitting instruction slip 7. Installation
screws
4. Key - 3 Nos.
5. Rim Lock body assembly
All the above listed items are packed in E-fluted
duplex board box.
Packing Contents:
Ten locks are packed in 5-ply box of size 420
mm X 175 mm X 210 mm and weight 9.6 kg.
Standard Packing:
Thickness of key : 2.0 mm
Number of levers : 6 pairs as per key
combinations
1 Body C.R.C.A. steel Powder-coated
2 Receptacle C.R.C.A. steel Powder-coated
3 Cover plate C.R.C.A. steel Powder-coated
4 Pin cylinder inner lock Brass Buffed and
Lacquered
5 Safety catch knob Mazak Powder-coated
6 Latch bolt Brass (Extruded) Buffed and Polished
7 Deadbolt Brass (Extruded) Buffed and Polished
8 Latch bolt puller Brass (Extruded) Buffed and Polished
9 Retainer/Fixing plate C.R.C.A. steel Galvanised
10 Latch bolt release C.R.C.A. steel Galvanised
11 Follower C.R.C.A. steel Galvanised
12 Deadbolt plates C.R.C.A. steel Galvanised
13 Deadbolt locking C.R.C.A. steel Galvanised
PIN TUMBLER LOCK ASSEMBLY
14 Driving cam C.R.C.A. steel sheet Galvanised
15 Latch bolt spring Spring steel --
16 Cylinder housing Brass Buffed and Lacquered
17 Cylinder Brass Polished, Buffed and
Lacquered
18 Rose Cold-rolled brass Bright acid dip
PIN TUMBLER LOCK ASSEMBLY
Operation:
Latch bolt is operable from inside by
latch bolt puller and from outside by the
key. It may also be deadlocked and held
back internally by using safety catch
knob.
The deadbolt is operable by key from
outside as well as from inside.
Left and right-handed, inside opening, 30
mm to 80 mm thick doors.
Suitable for:
Sr.N o. Material FinishComponent
Material Specifications:
Net weight : 0.920 kg
NOTE: A set of these locks with common key system can be made to order and supplied.
CM
YK
Rim Lock 2C (Inside Opening)Rim Lock 2C (Inside Opening)Rim Lock 2C (Inside Opening)Rim Lock 2C (Inside Opening)
RIM LOCK BODY ASSEMBLYRIM LOCK BODY ASSEMBLY
BACK
IMPORTANT: Do not oil, lubricate or paint the pin cylinder lock.
! Vertically interlocking deadbolts made from tough
special high-grade zinc-alloy provide resistance to
prying open/jimmying.
! Lock body and receptacle in scratch resistant power-
coated finish.
! 5 hard-brass pin tumbler mechanism.
! Nickel-plated brass keys.
! Corrosion-free brass cylinder for enhanced durability.
Product Features:
Product code : 3288 (Texture brown)
Baan code : LKXPDV001 (Texture brown)
Size : 110 mm X 73 mm
Backset : 63 mm
Bolt traverse : 13 mm
Technical data for
Vertibolt 1CK:
! Sliding doors
! Entrance doors
! Single and double-shutter doors
! Folding doors
! Wardrobe doors
Applications:
Vertibolt1CK
9
28
3
4
5
16
1314
12
11
CM
YK
NOTE: A set of these locks with master key & common key system can be made to order and supplied.
Lock can be locked and unlocked by key
from outside and by knob from inside.
Operation:
Ten locks are packed in 5-ply box of size 260
mm X 180 mm X 125 mm and weight 8.10
kg.
Standard Packing:
Left and right-handed, inside
opening, 25 mm to 60 mm
thick doors.
Suitable for:
1. Vertibolt - 1CK lock assembly
2. Pin cylinder lock assembly
3. Rose
4. Receptacle
5. Keys - 3 Nos.
6. Fitting instruction slip and Marker
7. Lock retainer plate
8. Installation screws
No. 9 X 40 mm - 4 Nos.
No. 8 X 25 mm - 6 Nos.
M5 X 60 mm - 2 Nos.
All the above listed items are packed in E-fluted
duplex board box.
Packing Contents:
1 Body Zinc-based die-casting alloy Powder-coated
2 Bolt Zinc-based die-casting alloy Bright nickel-chrome-plated
3 Knob Zinc-based die-casting alloy Powder-coated
4 Bolt slider Cold-rolled brass -
5 Follower Cold-rolled brass -
6 Spindle Zinc-based die-casting alloy -
7 Spindle follower Cold-rolled brass -
8 Bolt spring Spring steel -
9 Knob spring Stainless steel -
10 Back plate C.R.C.A. Steel Powder-coated
11 Lock retainer plate C.R.C.A. Steel Powder-coated
12 Receptacle C.R.C.A. steel Powder-coated
13 Pin cylinder lock Mazak housing/Brass cylinder Nickel-plated
assembly / Hard brass pins -
14 Connector Steel Zinc-plated
15 Key Hard brass Nickel-plated
Thickness of key : 2.3 mm
Number of pins : 5 pairs as per key combinations
Net weight (when packed) : 0.770 kg
Sr.N o.
Material Specifications:
Material FinishComponent
CM
YK
Vertibolt 1CKVertibolt 1CKVertibolt 1CKVertibolt 1CK
BACK