JQA-2042 NITTO KOHKI CO.,LTD.Machine Tools Division
ISO 9001JQA-EM4057NITTO KOHKI CO.,LTD.
HeadquartersResearch Center
ISO 14001
Cat. No. Tk083k
NITTO KOHKI CO.,LTD.
NEEDLE SCALER
JET CHISELAIR HAMMER
AUTO CHISELPNEUMATIC SCALER
SUPER KELENPNEUMATIC CHIPPING HAMMER
AIR CHIPPERPNEUMATIC GRINDER
MYTONPNEUMATIC DIE GRINDER
AIR SONICPNEUMATIC HAND DRILL
AIR DRILLPNEUMATIC BELT SANDER
BELTONPNEUMATIC DUST-FREE SANDER
ORBITAL SANDERPNEUMATIC COMPACT SANDER
PALM ORBITAL SANDERHANDY PNEUMATIC SANDER
FREE SANDERPNEUMATIC RECIPROCATING SANDER
LINE SANDERPORTABLE PRECISION FINISHING FILE
SUPER HANDPORTABLE FINE FINISHING FILE
MICRO AIR HANDPNEUMATIC HACKSAW
SUPER SAWPORTABLE CHAMFERING TOOLS
BEVELERPNEUMATIC RADIAL CHAMFERING TOOL
CIRCUIT BEVELER
Whether you just glance through thisbooklet or give it an intensive reading, weare sure you'll agree that NITTO KOHKI'sportable hydraulic and electric machines,couplings and pneumatic hand tools areamong the finest precision engineeredequipment to be found today.
HI CUPLA Series
"delvo" Electric Screwdrivers, Spring Balancer,Linear Motor Driven Free Piston System
Machine Tools
NOTES ON USING TOOLS – Important Safety Instructions
Page
3-4
5-6
7
8
9-10
11-12
12
13-14
15
15
16
17
18
19
19
20-22
22
23
24
25
26
Pneumatic & Electric Power Tools,Labor-saving plus Improved Work Efficiency!
Manufacturing
Various peening works
Rivet calking, bushinserting & removing
-
-
Sanding, grinding,chamfering, finishing
Metal working,surface smoothing
Trimming, chamferingcorner rounding
Smoothing,intermediate finishsanding
Smoothing,intermediate finishsanding
Surface sanding,rust & stain removal
Plane sanding,groove sanding
Precision filing offlash, chamfering,sanding, groovefinishing
Cuts with small radii
Various drilling works
Chamfering of largeworkplaces
Chamfering of diesand machine
Paint & rust scaling
Sheet metal cutting,paint chiseling, rivetpunching
-
-
-
Chamfering, roughgrinding, moldgrinding
Various grindingworks
Spot smoothing,surface regulation,finish sanding
Surface smoothingof steel products,finishing of pressedproducts
Surface smoothingof steel products,finishing of pressedproducts
Spot smoothing,corner rounding,surface smoothing
Spot smoothing,surface regulation
Trimming, filing innarrow space,surface regulation
To cut mild steelplates, aluminum,plastics and othermaterials
Various drilling works
-
Chamfering of steelplate
Spatter, chips &sludge scaling
Flux chiseling,plaster chiseling
Spatter, sludge andrust chiseling, scaling
-
Bead grinding, crosssection grinding
Bead grinding
Bead grinding, rustremoval, chamfering,section finishing
Surface sanding ofpre-welded part
Surface sanding ofpre-welded part
-
-
-
Finish filing
-
Initial boring for gascutting by welder
-
Surface chamfering ofpre-welded shaped steel parts
-
-
Paint chiseling
Paint chiseling
Paint chipping
Grinding of pre-painted surface,buffing
Pre-painted surfaceregulation
Rough grinding, rust& paint removal,spot smoothing
Ground work sanding
Ground work sanding
Sanding of pre-painted, plasteredsurface, water sanding
Sanding of plasteredsurface, intermediatefinish sanding
Precision filing ofpre-painted surface,sanding
-
Paint scrambling(w/attachment)
Chamfering of steelplate
-
Sand blasting &chiseling
Trimming, sandchiseling
Black surface scaling,scaling of ingotremnant in ladle
Sand chipping
Trimming, chamfering
Mold correction,trimming
Trimming, chamfering,spatter grinding,die-cast finishing
Trimming, surfacefinishing of die-casting
Trimming, surfacefinishing of die-casting
Mold correction
Mold correction
Trimming
-
-
-
Chamfering of castmolds
Rust scaling,welded-part finish
Various automotiverepair works
Removal of weeds,shells, concretechipping
Removal of weeds,shells, etc., concretechipping
Additional grinding,rust removal, surfacesmoothing
Precision grindingof parts
Welding chip grinding,finish grinding, fitting
Correction of grinding(finish works)
Correction of grinding(finish works)
Paint sanding ofautomotive body
Paint sanding ofautomotive body
Trimming, precisionsanding of parts
To cut the body plateof automotive vehiclesor shaped steel
Drilling, removal ofspot-welded parts
Chamfering of steelplate
-
-
-
-
-
-
Grinding of pipecross section andinner surface
Grinding of pipe &equipment surfaceface section
Precision finishing
Precision finishing
Sanding of plasteredsurface, and test piecesurface
Synthetic resin sanding
Filing, superfine filingfor profile correction
Precision filing offlash, chamfering,groove finishing
Trimming Trimming, precisionsanding of parts
Filing, superfine filingfor profile correction
To cut fiber plates.To cut fiber-reinforcedplastic plates
-
-
-
-
-
-
-
Sanding
Correction grindingof molded products,rough grinding
Finish sanding offurniture, profilecorrection of plasticproducts
Precision sanding
Precision sanding
Finish sanding, curvedsurface sanding,sanding of routergroove
Rough finish sanding
Filing, superfine filingfor profile correction
-
-
Drilling
-
-
Surface coarsening ofstone and concreteproducts
Concrete breaking,chiseling of stick
Concrete chiselingfrom framework,removal of linoleumfrom floor base
Chipping of stoneproducts
Chamfering of stoneproducts, honing
Additional grindingof constructionmaterials & parts
Grinding of parts &elements, repairservices of tools
Surface sanding ofconstructed materials
Surface sanding ofconstructed materials
Sanding of stoneproducts and floormaterials
Inner surface sandingof channeled parts
Correction sanding ofmetal parts
-
-
Sash works
Chamfering of steelplate
Chamfering of columns(HB-15B)
Sheet-Metal Working Welding Painting Metal Casting &Forging
Automotive &Ship Building
Chemical Engineering Wood Working & Art Construction
CONTENTS
1 2
NEEDLE SCALER
JET CHISELAIR HAMMER
AUTO CHISELPNEUMATIC SCALER
SUPER KELENPNEUMATIC CHIPPING HAMMER
AIR CHIPPERPNEUMATIC GRINDER
MYTONPNEUMATIC DIE GRINDER
AIR SONICPNEUMATIC HAND DRILL
AIR DRILLPNEUMATIC BELT SANDER
BELTONPNEUMATIC DUST-FREE SANDER
ORBITAL SANDERPNEUMATIC COMPACT SANDER
PALM ORBITAL SANDERHANDY PNEUMATIC SANDER
FREE SANDERPNEUMATIC RECIPROCATING SANDER
LINE SANDERPORTABLE PRECISION FINISHING FILE
SUPER HANDPORTABLE FINE FINISHING FILE
MICRO AIR HANDPNEUMATIC HACKSAW
SUPER SAWPORTABLE CHAMFERING TOOLS
BEVELERPNEUMATIC RADIAL CHAMFERING TOOL
CIRCUIT BEVELER
Whether you just glance through thisbooklet or give it an intensive reading, weare sure you'll agree that NITTO KOHKI'sportable hydraulic and electric machines,couplings and pneumatic hand tools areamong the finest precision engineeredequipment to be found today.
HI CUPLA Series
"delvo" Electric Screwdrivers, Spring Balancer,Linear Motor Driven Free Piston System
Machine Tools
NOTES ON USING TOOLS – Important Safety Instructions
Page
3-4
5-6
7
8
9-10
11-12
12
13-14
15
15
16
17
18
19
19
20-22
22
23
24
25
26
Pneumatic & Electric Power Tools,Labor-saving plus Improved Work Efficiency!
Manufacturing
Various peening works
Rivet calking, bushinserting & removing
-
-
Sanding, grinding,chamfering, finishing
Metal working,surface smoothing
Trimming, chamferingcorner rounding
Smoothing,intermediate finishsanding
Smoothing,intermediate finishsanding
Surface sanding,rust & stain removal
Plane sanding,groove sanding
Precision filing offlash, chamfering,sanding, groovefinishing
Cuts with small radii
Various drilling works
Chamfering of largeworkplaces
Chamfering of diesand machine
Paint & rust scaling
Sheet metal cutting,paint chiseling, rivetpunching
-
-
-
Chamfering, roughgrinding, moldgrinding
Various grindingworks
Spot smoothing,surface regulation,finish sanding
Surface smoothingof steel products,finishing of pressedproducts
Surface smoothingof steel products,finishing of pressedproducts
Spot smoothing,corner rounding,surface smoothing
Spot smoothing,surface regulation
Trimming, filing innarrow space,surface regulation
To cut mild steelplates, aluminum,plastics and othermaterials
Various drilling works
-
Chamfering of steelplate
Spatter, chips &sludge scaling
Flux chiseling,plaster chiseling
Spatter, sludge andrust chiseling, scaling
-
Bead grinding, crosssection grinding
Bead grinding
Bead grinding, rustremoval, chamfering,section finishing
Surface sanding ofpre-welded part
Surface sanding ofpre-welded part
-
-
-
Finish filing
-
Initial boring for gascutting by welder
-
Surface chamfering ofpre-welded shaped steel parts
-
-
Paint chiseling
Paint chiseling
Paint chipping
Grinding of pre-painted surface,buffing
Pre-painted surfaceregulation
Rough grinding, rust& paint removal,spot smoothing
Ground work sanding
Ground work sanding
Sanding of pre-painted, plasteredsurface, water sanding
Sanding of plasteredsurface, intermediatefinish sanding
Precision filing ofpre-painted surface,sanding
-
Paint scrambling(w/attachment)
Chamfering of steelplate
-
Sand blasting &chiseling
Trimming, sandchiseling
Black surface scaling,scaling of ingotremnant in ladle
Sand chipping
Trimming, chamfering
Mold correction,trimming
Trimming, chamfering,spatter grinding,die-cast finishing
Trimming, surfacefinishing of die-casting
Trimming, surfacefinishing of die-casting
Mold correction
Mold correction
Trimming
-
-
-
Chamfering of castmolds
Rust scaling,welded-part finish
Various automotiverepair works
Removal of weeds,shells, concretechipping
Removal of weeds,shells, etc., concretechipping
Additional grinding,rust removal, surfacesmoothing
Precision grindingof parts
Welding chip grinding,finish grinding, fitting
Correction of grinding(finish works)
Correction of grinding(finish works)
Paint sanding ofautomotive body
Paint sanding ofautomotive body
Trimming, precisionsanding of parts
To cut the body plateof automotive vehiclesor shaped steel
Drilling, removal ofspot-welded parts
Chamfering of steelplate
-
-
-
-
-
-
Grinding of pipecross section andinner surface
Grinding of pipe &equipment surfaceface section
Precision finishing
Precision finishing
Sanding of plasteredsurface, and test piecesurface
Synthetic resin sanding
Filing, superfine filingfor profile correction
Precision filing offlash, chamfering,groove finishing
Trimming Trimming, precisionsanding of parts
Filing, superfine filingfor profile correction
To cut fiber plates.To cut fiber-reinforcedplastic plates
-
-
-
-
-
-
-
Sanding
Correction grindingof molded products,rough grinding
Finish sanding offurniture, profilecorrection of plasticproducts
Precision sanding
Precision sanding
Finish sanding, curvedsurface sanding,sanding of routergroove
Rough finish sanding
Filing, superfine filingfor profile correction
-
-
Drilling
-
-
Surface coarsening ofstone and concreteproducts
Concrete breaking,chiseling of stick
Concrete chiselingfrom framework,removal of linoleumfrom floor base
Chipping of stoneproducts
Chamfering of stoneproducts, honing
Additional grindingof constructionmaterials & parts
Grinding of parts &elements, repairservices of tools
Surface sanding ofconstructed materials
Surface sanding ofconstructed materials
Sanding of stoneproducts and floormaterials
Inner surface sandingof channeled parts
Correction sanding ofmetal parts
-
-
Sash works
Chamfering of steelplate
Chamfering of columns(HB-15B)
Sheet-Metal Working Welding Painting Metal Casting &Forging
Automotive &Ship Building
Chemical Engineering Wood Working & Art Construction
CONTENTS
1 2
Powerful scaling with multi-needles
Never skip a blow, cleans and descales all jobs fast. Gets into extremely restricted areas...
An asset in any industry...de-slagging, de-sputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a light-weight,minimum- size air tool, Jet Chisel delivers years of trouble-free, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient time-saver in ship-board applications, too.
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
qty
inch
kg
AJC-16
0.6 {6}
0.07
6,000
OD 2 × 7 pcs. or OD 3 × 3 pcs.
3/8
0.98
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Needle
Hose Size
Mass (Weight)
JT-20
0.6 {6}
0.2
4,000
OD 2 × 29 pcs. or OD 3 × 12 pcs.
3/8
2.4
JEX-20
0.6 {6}
0.2
4,000
OD 2 × 29 pcs. or OD 3 × 12 pcs.
3/8
2.75
• Needle OD 3 mm × 180 mm : 3 pcs. (Needle OD 3 mm × 180 mm : 3 pcs. on the body)• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.
• Needle OD 3 mm × 180 mm : 12 pcs. (Needle OD 3 mm × 180 mm : 12 pcs. on the body)• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.
• Needle OD 3 mm × 180 mm : 12 pcs. (Needle OD 3 mm × 180 mm : 12 pcs. on the body)• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.
Slim TypeAJC-16Model
Popular TypeJT-20Model
NEEDLE SCALER JET CHISEL SCALING
JEX-20Model
Low Vibration Type
190 mm245 mm 244 mm
JET CHISEL
Reinforcement of the deteriorated part by shot peening effect. Increase the strength through imparting a residual stress to the surface of a workpiece by high speed tapping of the needle punch. Most suitable for a reinforcement of deteriorated parts in the welder.
Shot Peening Effect Full Automatic SystemThe only unit of it’s kind on the market without springs. This means no springs to break...no irregular power... and the advantage of low air consumption.
3
NEEDLE SCALER JET CHISELSCALING
Electric Needle Scaler
Optional Needles
EJC-32A
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Needle
Hose Size
Mass (Weight)
Model
Specifications
Standerd Accessories
MPa {kgf/cm2}
m3/min
min-1
qty
inch
kg
JC-16
0.15
4,000
OD 2 × 29 pcs.
1.4
JEX-24
0.27
4,000
OD 2 × 53 pcs. or OD 3 × 23 pcs.
2.7
JEX-2800A
0.43
3,700
3.1
JEX-28
0.35
4,500
3.5
• Needle OD 2 mm × 150 mm : 58 pcs. (Needle OD 2 mm × 150 mm : 29 pcs. on the body)
• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.
• Needle OD 3 mm × 180 mm : 23 pcs. on the body• 6 mm Hex. Socket Screw Key : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.
The same excellent performance as our air tool!
Standard Accessories• Needle OD 3 mm × 180 mm : 30 pcs.(Needle OD 3 mm × 180 mm : 15 pcs. on the body)• 6 mm Hex. Socket Screw Key : 1 pc.
• Needle OD 4 mm × 180 mm : 14 pcs.• Needle OD 3 mm × 180 mm : 28 pcs. on the body• Needle Supporter OD 4 mm : 1 pc. • 6 mm Hex. Socket Screw Key : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.
• Needle OD 4 mm × 180 mm : 14 pcs.• Needle OD 3 mm × 180 mm : 28 pcs. on the body• Needle Supporter OD 4 mm : 1 pc. • Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.
UniversalTypeJEX-24Model Heavy-duty
TypeJEX-28Model JEX-2800AModel
Operated with standard electric supply to households.Special long and slim barrel design suitable for narrow corners.Double-insulated motor does not need grounding.Free subhandle position best fit to your working situation.
PN Description QtyTA98780TA98781TA9A213TA9A214TA98782TA9A216TA9A217TA9A218TA98783TA9A220TA9A221
100 pcs.100 pcs.50 pcs.50 pcs.100 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.
Needle OD 2 mm × 150 mmNeedle OD 2 mm × 180 mmNeedle OD 2 mm × 300 mmNeedle OD 2 mm × 500 mmNeedle OD 3 mm × 180 mmNeedle OD 3 mm × 300 mmNeedle OD 3 mm × 500 mmNeedle OD 3 mm × 800 mmNeedle OD 4 mm × 180 mmNeedle OD 4 mm × 300 mmNeedle OD 4 mm × 500 mm
Specifications
W
A
min
min-1
qty
m
kg
115 V AC, 50/60 Hz
2.8
230 V AC, 50/60 Hz
1.4
EJC-32A
300
30
3,000OD 2 × 32 pcs. or OD 3 × 15 pcs.
5
4.5
Model
Power Supply
Rated Power Consumption
Rated Current
Rated Duty
Stroke Speed
Needle
Power Cord
Mass (Weight)
JC-16Model LightweightType
158 mm 237 mm264 mm
247 mm
150 mm
520 mm
225 mm
159 mm173 mm 173 mm
Low-vibration Type
PN Description Qty ModelTP00338TP00337TQ05210TQ04554TP00290TP02244TP02245TP01499TP01461TP01462TP16475TP16301
1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.
JT-20,JEX-20
AJC-16
JEX-24
EJC-32A
JEX-28,JEX-2800A
JC-16
Needle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 4 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mm
230 V AC only
OD 2 × 66 pcs. or OD 3 × 28 pcs. or OD 4 × 14 pcs.
0.6 {6}
3/8
4
SCALING
A special spool valve inside gripassures excellent durability
The A-300 Auto Chisel is designed for speeding up the repair and sheet metal works of automobiles, etc. Being light and powerful, labor can be reduced remarkably. This tool enables the work to be done in narrow space where ordinary hammering work is impossible. Thus the skill usually needed in hammering work is eliminated. The respective parts employ high material and are subjected to high precision process.
Model
Model
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
inch
kg
A-300
0.6 {6}
0.3
2,600
1/4
1.7
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Hose Size
Mass (Weight)• Bushing R 1/4 × NPT 1/4 : 1 pc.• Hose Nipple R 1/4 × 1/4 : 1 pc.
A-300
Optional AttachmentsPN Description Qty PN Description Qty
TP00572TP00573TP04606TP00575TP00576TP00577TP00578TP00579TP00580TP00581TP00582TP00583
1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.
No.1001 Blank ChiselNo.1002 Flat Chisel No.1003 Sheet Metal Chisel ANo.1004 Sheet Metal Chisel B No.1005 Silencer Cutting ChiselNo.1006 Rubber Bushing Remover No.1007 Spot Weld BoosterNo.1008 Bushing ToolNo.1009 PunchNo.1010 Bushing Removing ToolNo.1011 Sheet Metal PunchNo.1012 20 mm Bending Chisel
TP00584TA90051TP00586TP00585TP00589TP00590TP00591TP04995TP05244TP05775TP05801
-
1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.-
No.1013 Fork Chisel 24No.1014 Panel CrimperNo.1016 Fork Chisel 35No.1017 Fork Chisel 15No.1018 38 mm ScraperNo.1019 60 mm ScraperNo.1020 60 mm Concave ScraperNo.1023 Sheet Metal Chisel CNo.1024 Moilpoint ChiselNo.1025 Rivet Removing PunchNo.1026 Rivet Caulking Chisel -
185 mm
160 mm
AIR HAMMER AUTO CHISEL
AUTO CHISEL
5
SCALING
Applications and wide variety of optional attachmentsNo. 1001 Blank Chisel (TP00572)For a variety of sheet metal work, bending,and rivet closing jobs
No. 1002 Flat Chisel (TP00573)Puts increased efficiency into scraping,peeling spot welds, and cutting off bolts andpins
No. 1003 Sheet Metal Chisel A (TP04606)Cuts shapes in sheet metal fast
No. 1004 Sheet Metal Chisel B (TP00575)Just the chisel for cutting off sheet metal bodypanel
No. 1005 Silencer Cutting Chisel (TP00576)A quick cut-off chisel for muffler piping
No. 1006 Rubber Bushing Remover (TP00577)Helps you remove idle arm sleeves andbushings in record time
No. 1007 Spot Weld Booster (TP00578)Ideal for peeling off spot welded points andcutting off pins
No. 1008 Bushing Tool (TP00579)Puts speed and ease into the job of bushinginsertion
No. 1009 Punch (TP00580)For driving out pins and rivets, and fitting andremoving bearings and races
No. 1010 Bushing Removing Tool (TP00581)A faster servicing aid in removing bushings
No. 1011 Sheet Metal Punch (TP00582)Opens holes for bolts and rivets
No. 1012 20 mm Bending Chisel (TP00583)Helps you in peening and removing slagaround welds
No. 1013 Fork Chisel 24 (TP00584)Disconnecting tie rod ends and ball joints
No. 1014 Panel Crimper (TA90051)Bending sheet metal: external body plates,doors, fenders, etc.
No. 1016 Fork Chisel 35 (TP00586)Disconnecting tie rod end ball joints
No. 1017 Fork Chisel 15 (TP00585)Disconnecting tie rod end ball joints
No. 1018 38 mm Scraper (TP00589)Peeling paint & removing rust from iron plate
No. 1019 60 mm Scraper (TP00590)Peeling paint & removing rust from iron plate
No. 1020 60 mm Concave Scraper (TP00591)Removing incrustation from pipe
No. 1023 Sheet Metal Chisel C (TP04995)Cuts shapes in sheet metal fast
No. 1024 Moilpoint Chisel (TP05244)Breaking-up concrete, removing sand fromcastings
No. 1025 Rivet Removing Punch (TP05775)Removing rivets from brake lining of heavyduty cars
No. 1026 Rivet Caulking Chisel (TP05801)Caulking brake lining of heavy duty cars
AIR HAMMER AUTO CHISEL
6
SCALING
Industrial and shipboard descaling and cleaning
The unique scaler preforms scores of industrial and shipboard descaling and cleaning jobs quickly, efficiently and economically. Removes old paint and rust, dislodges solid matter or scale tar. Removes concrete adhering to panels, conveyors, mixers. Strips off bark from lumber, and scores of other applications.
Model
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
inch
mm
kg
S-250
0.6 {6}
0.27
2,500
12.7
3/8
630 × 49
4.1
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Size of Chisel Shank
Hose Size
Dimension
Mass (Weight)
S-500
0.6 {6}
0.27
2,500
12.7
3/8
890 × 49
4.7
S-1000
0.6 {6}
0.27
2,500
12.7
3/8
1,470 × 49
6.1
• 38 mm Bend Scraper (No.2005) : 1 pc. on the body• Hose Lock Nut M16 : 1 pc.• Hose Nipple 3/8 : 1 pc.
• 38 mm Bend Scraper (No.2005) : 1 pc. on the body• Hose Lock Nut M16 : 1 pc.• Hose Nipple 3/8 : 1 pc.
• 38 mm Bend Scraper (No.2005) : 1 pc. on the body• Hose Lock Nut M16 : 1 pc.• Hose Nipple 3/8 : 1 pc.
S-1000Model
S-500ModelS-250
Model
Optional Chisels
PN Description QtyTP03645TP03646TP03647TP04010TP04552TP04553TP04554
1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.
No.2001 60 mm ScraperNo.2002 38 mm ScraperNo.2003 Blank ChiselNo.2004 60 mm Concave ScraperNo.2005 38 mm Bend ScraperNo.2006 60 mm Concave Bend ScraperNo.2007 60 mm Bend Scraper2001 2002 2003 2004 2005 2006 2007
PNEUMATIC SCALER SUPER KELEN
SUPER KELEN
7
SCALING
Now chipping after welding is easy!
The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places. In addition, the ACH-16 has many feature on the followings..... • Idle running proof structure adopted. No blowing without touching the work piece by the chisel. • Vibration on operation is reduced by low vibration structure. Especially effective on continuous operation. • Easy to handle, compact lightweight type and weight only one kilogram.
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Size of Chisel Shank
Hose Size
Mass (Weight)
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
inch
kg
ACH-16
0.6 {6}
0.15
6,000
OD 10.5
3/8
0.9
CH-24
0.6 {6}
0.2
4,000
12.7 sq.
3/8
1.7
• Flat Chisel 20 × 120 : 1 pc. on the body• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.
• Curved Flat Chisel 25 × 155 : 1 pc. on the body• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.
Model
ACH-16Model
CH-24
Optional Chisels PN Description Qty
TQ03431TQ03453TQ03549TQ03452
TQ03452TQ03549TQ03453TQ03431
1 pc.1 pc.1 pc.1 pc.
Flat Chisel 20 × 120Curved Flat Chisel 20 × 120Flat Chisel 11 × 120Flat Chisel 20 × 180
PN DescriptionChisel for Air Chipper CH-24
Chisel for Air Chipper ACH-16
QtyTP15234TP15233TP15166
TP15166TP15233TP15234
1 pc.1 pc.1 pc.
Straight Flat Chisel 12.7 × 165Flat Chisel 25 × 155Curved Flat Chisel 25 × 155
147 mm
184 mm
AIR CHIPPERPNEUMATIC CHIPPING HAMMER AIR CHIPPER
8
GRINDING & SANDING
A wide variety of models are available to a particular job!
MLG-25Model
0.6 {6}
0.75 (No load) 1.1 (Load)
7,600
180
3/8
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Depressed Center Grinding Wheel
Hose Size
Mass (Weight)
Specifications
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
inch
kg
• 6 mm Hex. Socket Screw Key : 1 pc.• 10 mm Hex. Socket Screw Key : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.• Handle Ass’y : 1 set.• Wheel Guard Ass’y : 1 set
Standard Accessories
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
inch
kg
MLG-25
0.6 {6}
0.42
19,000
58
1/4
0.6
MLG-40
0.6 {6}
0.45 (No Load) 0.91 (Load)
13,000
100
3/8
1.5
MAGW-40
0.6 {6}
0.68 (No load) 0.82 (Load)
13,000
100
3/8
1.55
Model
Rated Air Pressure
Air Consumption
Free Speed
Depressed Center Grinding Wheel
Hose Size
Mass (Weight)
• Green Disc GS #80 : 1 pc.• 5 mm Hex. Socket Screw Key : 1 pc.• 19 mm Single Ended Spanner : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.
• 5 mm Hex. Socket Screw Key : 1 pc.• 6 mm Hex. Socket Screw Key : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.
• 6 mm Hex. Socket Screw Key : 1 pc.• 17 mm Single Ended Spanner : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.
MAG-50
0.6 {6}
0.87
12,000
125
3/8
2.2
• Air Hose Sub Ass'y : 1 set• Exhaust Hose Ass'y : 1 set• Side Handle Ass'y : 1 set• 4 mm Hex. Socket Screw Key : 1 pc.• Pin Face Wrench : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.
MAGW-40Model
Depressed centerwheel 58 mm MLG-40
ModelDepressed centerwheel 100 mm
Depressed centerwheel 100 mm
133 mm 224.5 mm
66.5 mm 85.5 mm
219 mm
95 mm
PNEUMATIC GRINDER MYTON
MYTON
MAG-50Model
Depressed centerwheel 125 mm MLG-70
ModelDepressed centerwheel 180 mmMLG-70
ModelDepressed centerwheel 180 mm
102 mm102 mm
238 mm256 mm
Lever Type Ring Type
MLG-70 Ring TypeMLG-70 Lever Type
2.252.45
221 mm
89 mm
9
MAS-20BModel
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1 (rpm)
inch
kg
MAS-20B
0.6 {6}
0.4
22,000
1" , 1-1/2" and 2"
1/4
0.5
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Abrasive Disc
Hose Size
Mass (Weight)
MAS-40
0.6 {6}
0.45
13,700
100 mm
3/8
0.9
MAS-70
0.6 {6}
0.98
7,500
180 mm
3/8
1.9
• 14 mm Single Ended Spanner : 1 pc.• Cupla 20SH : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.• Back-up Pad 1" : 1 pc.• Back-up Pad 1-1/2" : 1 pc.• Back-up Pad 2" : 1 pc.• Abrasive Paper 1" × #60, #80, #100, #120 : 2 pcs. each• Abrasive Paper 1-1/2" × #60, #80, #100, #120 : 2 pcs. each• Abrasive Paper 2" × #60, #80, #100, #120 : 2 pcs. each
• 6 mm Hex. Socket Screw Key : 1 pc.• 17 mm Single Ended Spanner : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.• Hose Nipple NPT 1/4 × 3/8 : 1 pc.
• 10 mm Hex. Socket Screw Key : 1 pc.• 41 mm Single Ended Spanner : 1 pc.• Hose Nipple NPT 3/8 × 3/8 : 1 pc.• Bushing M16 × NPT 3/8 : 1 pc.
MAS-40Model
MAS-70Model
Abrasive disc 1",1-1/2" & 2"
Abrasive disc 100 mm
Abrasive disc180 mm
Optional Parts
PN Description QtyTA9B101TA9B102TA9B103TA9B104
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 1" × #40Paper 1" × #60Paper 1" × #80Paper 1" × #100
PN Description QtyTA9B105TA9B106TA9B107TA9B108
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 1" × #120Paper 1" × #180Paper 1" × #240Paper 1" × #320
Green Discs for MYTON MLG-25 Disc Pad for MYTON MAS-20B
1" Paper for MYTON MAS-20B
PN Description QtyTA9B109TA9B110TA9B111TA9B112
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 1-1/2" × #40Paper 1-1/2" × #60Paper 1-1/2" × #80Paper 1-1/2" × #100
PN Description QtyTA9B113TA9B114TA9B115TA9B116
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 1-1/2" × #120Paper 1-1/2" × #180Paper 1-1/2" × #240Paper 1-1/2" × #320
1-1/2" Paper for MYTON MAS-20B
PN Description QtyTA9B117TA9B118TA9B119TA9B120
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 2" × #40Paper 2" × #60Paper 2" × #80Paper 2" × #100
PN Description QtyTA9B121TA9B122TA9B123TA9B124
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 2" × #120Paper 2" × #180Paper 2" × #240Paper 2" × #320
2" Paper for MYTON MAS-20B
GRINDING & SANDING
PN Description QtyTB08872TB08873TB08874TB08875TB08876
5 pcs.5 pcs.
10 pcs.5 pcs.5 pcs.
GS#46 × 58 mmGS#60 × 58 mmGS#80 × 58 mm
GS#100 × 58 mmGS#120 × 58 mm
128 mm
101 mm
180 mm
82 mm
99 mm
202 mm
PN Description QtyTP18576TP18575TP18574
1 pc.1 pc.1 pc.
PAD (1") No.1PAD (1-1/2") No.2PAD (2") No.3
PNEUMATIC SANDER MYTON
Green Discs cannot be used on MAG-25.
Japanese Model
10
GRINDING
The perfect tool for all tasks!
L-25BModel
Specifications
Standard Accessories
Optional AccessoriesMounted Wheel for AIR SONIC L-25B (5 pcs/set) Rotary Bar for AIR SONIC L-35C (1 pc.)
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
inch
kg
L-25B
0.4
27,000
0.6 (without hose)
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Size of Collet Chuck
Hose Size
Mass (Weight)
L-35C
0.35
37,500
0.45 (without hose)
• 14 mm Single Ended Spanner : 1 pc.• Mounted Wheel No.2 : 1 pc.• Mounted Wheel No.3 : 1 pc.
No.1 : 16 × 32
No.5 : 19 × 28
No.2 : 17 × 32
No.6 : 25 × 13
No.3 : 19 × 20
No.7 : 32 × 10
No.4 : 25 × 25
No.8 : 16 ballPN : TA9A277
PN : TA9A281
PN : TA9A278
PN : TA9A282
PN : TA9A279
PN : TA9A283
PN : TA9A280
No.1 : CB1C-106
PN : TP10594
PN : TA9A284
No.5 : CB5C-104
PN : TP10598
No.2 : CB2C-105
PN : TP10595
No.6 : CB6C-102
PN : TP10599
No.3 : CB3C-103
PN : TP10596
No.7 : CB7C-103
PN : TP10600
No.4 : CB4C-103
PN : TP10597
No.8 : CB8C-105
PN : TP10601
• Chuck Pin : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.
• 14 mm Single Ended Spanner : 1 pc.• Mounted Wheel 13 × 13 × 6 × 38 : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.
For all grinding, deburring and finishing jobs Special design for rotary barsL-35CModel
The high-speed mighty mite with super-efficient silencer and rear exhaust system. Wonder works on all metals, wood, and plastics, even extremely hard and exotic materials. And now that efficiency is upgraded with the addition of an air silencer and new rear exhaust system for grinding dust-it's all the more the perfect tool for toolrooms and model shops. The super efficiency of the silencermakes it possible for all craftsmen to work longer with less irritation due to noise. For precision grinding, deburring machines parts, grinding small castings, removing welding slags, shaping and finishing wood, glass and plastics. This is the compact, easy handing air tool for all tasks.
136 mm 171 mm
PNEUMATIC DIE GRINDER AIR SONIC
AIR SONIC
0.6 {6}
6
1/4
11
AL-55Model
Specifications
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
inch
kg
AL-55
0.6 {6}
0.17
56,500
3
1/4
0.25
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Size of Collet Chuck
Hose Size
Mass (Weight)
High Speed Rotation 56,500 rpm
• Mounted Wheel 5 × 13 × 3 : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.
• Spanner 7 × 9 : 1 pc.Standard Accessories
GRINDINGDRILLING
129 mm
22 mm OD
AIR SONICPNEUMATICDIE GRINDER
Smooth high speed rotation and low vibration enables precision grinding. Stepless speed change from 0 to 56,500 rpm meets a wide range of grinding applications. Compact & light weight for comfortable operation over long periods of time. Triangular grip fits operator's hand. Special plastic grip prevents cold hands and absorbs vibration. Rear exhaust system.
Grinding Stone (Optional)
• 5 dia. × 13 × 3 mm : 10 pcs./set
PN TB00137
PNEUMATICHAND DRILL AIR DRILL
ADR-65Model Model
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Max. Drilling Capacity
Mass (Weight)
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
kg
ADR-65
0.6 {6}
0.55
2,900
6.5
0.8
ADR-100
0.6 {6}
0.67
2,000
10.0
1.1
• Drill Chuck : 1 pc. on the body• Chuck Handle : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.• 30SH : 1 pc.
Optional Accessory• Hanger : 1 pc. *A hanger to be mounted on the bottom of the grip is available as option.
The power and performance you needto drill deeper and faster
175 mm
154 mm
ADR-100
168 mm
221 mm
Built-in silencer ReversibleVariable speed adjustmentRubber grip reduces chilled hand
Change rotation direction by turning the valve as indicated.
Forward
Reverse
Reversible
Variable speed adjustmentTurn the speed control nutto change the R.P.M.
AIR DRILL
12
SANDING
Rear exhaustsystem
Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1 (rpm)
m/min
mm
inch
kg
B-10N0.6 {6}
0.417,0001,120
10 × 3301/40.7
Model
Rated Air Pressure
Air Consumption (No load)
Motor Free Speed
Belt Speed
Belt Size
Hose Size
Mass (Weight)
B-20N0.6 {6}0.52
17,0002,620
20 × 5201/41.2
B-30N0.6 {6}0.68
14,0002,160
30 × 5401/42.4
•Abrasive Belt Z#60 × 10 mm :2 pcs. (1 pc. on the body)•Abrasive Belt Z#80 × 10 mm :1 pc.•Abrasive Belt Z#100 × 10 mm :1 pc.•Abrasive Belt Z#120 × 10 mm :1 pc.•2 mm Hex. Wrench Key :1 pc.•4 mm Hex. Wrench Key :1 pc.•Bushing R 1/4 × NPT 1/4 :1 pc.•Silencer :1 pc.
•Abrasive Belt Z#60 × 20 mm :2 pcs. (1 pc. on the body)•Abrasive Belt Z#80 × 20 mm :1 pc.•Abrasive Belt Z#100 × 20 mm :1 pc.•Abrasive Belt Z#120 × 20 mm :1 pc.•2.5 mm Hex. Wrench Key :1 pc.•4 mm Hex. Wrench Key :1 pc.•Bushing R 1/4 × NPT 1/4 :1 pc.•Convex Shoe :1 pc.•Finger Pad Ass'y :1 pc.•Pan Head Screw 5 × 10 :1 pc.•Pan Head Screw 6 × 10 :1 pc.
B-20NB0.6 {6}0.52
17,0002,620
20 × 5201/41.2
•Abrasive Belt Z#60 × 20 mm :2 pcs. (1 pc. on the body)•Abrasive Belt Z#80 × 20 mm :1 pc.•Abrasive Belt Z#100 × 20 mm :1 pc.•Abrasive Belt Z#120 × 20 mm :1 pc.•2.5 mm Hex. Wrench Key :1 pc.•4 mm Hex. Wrench Key :1 pc.•Bushing R 1/4 × NPT 1/4 :1 pc.•Convex Shoe :1 pc.•Finger Pad Ass'y :1 pc.•Pan Head Screw 5 × 10 :1 pc.•Pan Head Screw 6 × 10 :1 pc.
•Abrasive Belt Z#60 × 30 mm :2 pcs. (1 pc. on the body)•Abrasive Belt Z#80 × 30 mm :1 pc.•Abrasive Belt Z#100 × 30 mm :1 pc.•4 mm Hex. Wrench Key :1 pc.•5 mm Hex. Wrench Key :1 pc.•Bushing R 1/4 × NPT 1/4 :1 pc.•Sub Handle Ass'y :1 set•Grip Guard :1 pc.•Silencer :1 pc.
Optional Parts
PN Description QtyTQ10942TB07283TB05539
1 pc.1 set1 set
Shoe 6 (for 6 mm belt)
Bracket 6 Ass'y (for 6 mm belt)
Offset Bracket 10 Ass'y
Optional Parts for B-10NPN Description Qty
TB07109 1 setOffset Bracket 20 Ass'y
Optional Parts for B-20N/B-20NBPN Description Qty
TB08150 1 setOffset Bracket 30 Ass'y
Optional Parts for B-30N
PN Description QtyTB00241TB00242TB00243TB00244TB00245TB00246TA9A237TA9A064TB00076TB00077TB00247TB00248TB00249TA9A244
50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.
Abrasive Belt Z#60 × 6 mmAbrasive Belt Z#80 × 6 mmAbrasive Belt Z#100 × 6 mmAbrasive Belt Z#120 × 6 mmAbrasive Belt Z#180 × 6 mmAbrasive Belt Z#240 × 6 mmAbrasive Belt AA#400 × 6 mmAbrasive Belt Z#60 × 10 mmAbrasive Belt Z#80 × 10 mmAbrasive Belt Z#100 × 10 mmAbrasive Belt Z#120 × 10 mmAbrasive Belt Z#180 × 10 mmAbrasive Belt Z#240 × 10 mmAbrasive Belt AA#400 × 10 mm
Abrasive Belt for B-10NPN Description Qty
TA99605TA99606TA99607TA99608TA99609TB00250TB00251TA9A252TA9A253TA9A254
20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.
Abrasive Belt Z#40 × 20 mmAbrasive Belt Z#60 × 20 mmAbrasive Belt Z#80 × 20 mmAbrasive Belt Z#100 × 20 mmAbrasive Belt Z#120 × 20 mmAbrasive Belt Z#180 × 20 mmAbrasive Belt Z#240 × 20 mmAbrasive Belt AA#280 × 20 mmAbrasive Belt AA#320 × 20 mmAbrasive Belt AA#400 × 20 mm
Abrasive Belt for B-20N/B-20NB Abrasive Belt for B-30NPN Description Qty
TB00252TB00253TB00254TB00255TB00256TB00257TB00258TA9A262TA9A263TA9A264
20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.
Abrasive Belt Z#40 × 30 mmAbrasive Belt Z#60 × 30 mmAbrasive Belt Z#80 × 30 mmAbrasive Belt Z#100 × 30 mmAbrasive Belt Z#120 × 30 mmAbrasive Belt Z#180 × 30 mmAbrasive Belt Z#240 × 30 mmAbrasive Belt AA#280 × 30 mmAbrasive Belt AA#320 × 30 mmAbrasive Belt AA#400 × 30 mm
PNEUMATIC BELT SANDER BELTON
BELTONB-30NModel
Belt Size30 mm (W)B-30NModelBelt Size30 mm (W)
299 mm
257 mm
B-20NModelBelt Size20 mm (W)
250 mm
243 mm
Model B-20NB Belt Size20 mm (W)
250 mm
243 mm
B-10NModel B-10NModelBelt Size10 mm (W)
152 mm
223 mm
The Idle Pulleyfor B-20N is supportedby both sides.
The Idle Pulleyfor B-20NB is supportedby one side only.
13
SANDING
Optional Parts For BABY BELTON
PN Description QtyTA9A064TB00076TB00077TB00247TB00248TB00249TA9A244
50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.
Abrasive Belt Z#60 × 10 mmAbrasive Belt Z#80 × 10 mmAbrasive Belt Z#100 × 10 mmAbrasive Belt Z#120 × 10 mmAbrasive Belt Z#180 × 10 mmAbrasive Belt Z#240 × 10 mmAbrasive Belt AA#400 × 10 mm
Abrasive Belt for BB-10A
* #400 is Aluminium Belt.
PN Description QtyTB07114TB07115TB07116TB07117TB07118TB07119TB07120TB07125TB07126TB07127TB07128TB07121TB07122TB07123
20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.5 pcs.5 pcs.5 pcs.
Abrasive Belt Z#60Abrasive Belt Z#80Abrasive Belt Z#100Abrasive Belt Z#120Abrasive Belt Z#180Abrasive Belt Z#240Abrasive Belt Z#400 (*)
Abrasive Belt CE#60Abrasive Belt CE#80Abrasive Belt CE#100Abrasive Belt CE#120Finish Belt A-M (Equivalent to #180)
Finish Belt A-VF (Equivalent to #320) Finish Belt S-SF (Equivalent to #400)
Abrasive Belt for BB-20
PNEUMATIC BELT SANDER BELTON
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1 (rpm)
m/min
mm
inch
kg
Model
Rated Air Pressure
Air Consumption (No load)
Motor Free Speed
Belt Speed
Belt Size
Hose Size
Mass (Weight)
BB-200.6 {6}0.43
16,0001,100
20 × 3301/40.8
BB-10A0.6 {6}0.25
16,0001,000
10 × 3301/40.6
•Abrasive Belt Z#100 × 10 mm:1 pc. (on the body)•Abrasive Belt Z#120 × 10 mm:1 pc.•Abrasive Belt Z#180 × 10 mm:1 pc.•Abrasive Belt Z#240 × 10 mm:1 pc.•1.5 mm Hex. Wrench Key :1 pc.•Cupla HA-65SN:1 pc.
•Abrasive Belt Z#60 × 20 mm:1 pc. (on the body)•Abrasive Belt Z#120 × 20 mm:1 pc.•Abrasive Belt Z#240 × 20 mm:1 pc.•2.5 mm Hex. Wrench Key :1 pc.•3 mm Hex. Wrench Key :1 pc.•Cupla HA-65SN:1 pc.•Shoe:1 pc. •Dust Cover :1 pc.
Ideal for deburring, chamfering, bead grinding, and polishing applications
Deburring & chamfering of uneven edge and plate surfaces
Detail finishing Deburning of thin materials
Curved and unique profiles
Belt rotation direction can be changed. Lever position can be changed for right or left hand operator convenience.
For left-handed user
For right-handed user
BABY BELTON BB-10AModelBelt Size10 mm (W)
246 mm
79 mm
BB-20ModelBelt Size20 mm (W)
249 mm
103 mm
• Compact and lightweight, yet powerful.• Alternative rotation direction.• Ergonomically designed for right or left hand operator convenience.
• Compact and lightweight, yet powerful.• Alternative rotation direction.• Ergonomically designed for right or left hand operator convenience.
ReverseReverseForwardForward
14
PN Description QtyTA99582TA99583TA99584TA99585TA99586
100 pcs.100 pcs.100 pcs.100 pcs.100 pcs.
Abrasive Paper #40 Abrasive Paper #60 Abrasive Paper #80 Abrasive Paper #100Abrasive Paper #120
PN Description QtyTA99587TA99588TA99589TA99590TA99591
100 pcs.100 pcs.100 pcs.100 pcs.100 pcs.
Abrasive Paper #180 Abrasive Paper #240 Abrasive Paper #280 Abrasive Paper #320 Abrasive Paper #400
SANDING
APS-125/150
Standerd Accessories • Spanner 17 : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.
Ergonomically designed plastic housing conforms to the operator's hand for greater control and comfort
Model
Specifications
Non Vacuum
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
mm
kg
kg
APS-125
0.6 {6}
0.45
10,000
5
125
0.69
0.10
Model
Rated Air Pressure
Air Consumption (No load)
Motor Free Speed
Orbit Diameter
Paper Size
Mass (Weight)
Pad Mass (Weight)
APS-150
0.6 {6}
0.45
10,000
5
150
0.72
0.12Feather edging, metal preparation, and finishing work on body filler.Curved surface sanding and corner rounding in wood work.
Applications
Available from stock are Non Vacuum Models. You can modify Non Vacuum to Self Vacuum or Central Vacuum by adding a few extra parts.
For Self Vacuum & Central Vacuum
Self Vacuum Central Vacuum
Extremely light. APS-125 weights just 690 g.Simple structure for easy maintenance.Extermely low vibration.Adjustable speed.
Random orbital action produces a high-quality swirl-free finish
145 mm
PNEUMATIC COMPACT SANDER PALM ORBITAL SANDER
PALM ORBITAL SANDER
OSV-60ASand and polish metal, wood, plastic to a super fine swirl-free finish.Light weight, compact, powerful, whisper quiet, and adjustable speed regulator.Productivity and efficiency increase with the orbital sander. The lightweight unit delivers the performance of heavy duty unit with less vibration and reduced operator fatigue.
Model
Model
Specifications
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
mm
kg
OSV-60A
0.6 {6}
0.68
8,500
10
150
2.0
for self stick papers
Model
Rated Air Pressure
Air Consumption (No load)
Motor Free Speed
Orbit Diameter
Paper Size
Mass (Weight)
Pad
245 mm
Compact yet extremely powerful.Built-in adjustable speed regulator
Standard Accessories
• Bushing R 1/4 × NPT 1/4 : 1 pc.• Spanner 17 : 1 pc.• Brush : 1 pc.• Dust Bag : 1 pc.• Hose : 1 pc.• Hose Band : 1 pc.
Random orbital action creates aprofessional finish
Optional Accessories
ORBITAL SANDER
The special construction includes the mounting of counter shaft below the rotor. This works in combination with the spindle and circular motions for an extra-fine finish. Speed adjustments allow selection for the best speed for the best job. Random orbital action eliminates swirl patterns and is suitable for polishing, too.
15
SANDING
Superlight, Quiet New low-vibration sander
FS-100C
Small and Lightweight for Comfort and ConvenienceFree Sander fits the hand like a glove. It's human-engineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots.
Minimized Hand VibrationThe turbine motor of FS-100C and the single-ball air motor of FS-50A are mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.
Model
Round-Pad for FS-100C
FS-50AModel
The pad is made of sponge rubber and conform easily to the shape being worked.Double-side tape is used with round pad.
This newly developed motor features a turbine disc and is capable of high speed orbits for super-fine finishing of all materials.
Optional Accessories PN Description Qty
TA99828TB02240
1 pc.1 pc.
Rubber Pad Ass'yDust Collector Ass'y
PN Description QtyTA9A367TA91474TA9A265TA9A266TA9A267TA9A268TA9A269TA9A270TA9A271TB02235
1 pc.1 pc.
200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.
1 pc.
Rubber Pad Ass'yRound Pad Ass'yAbrasive paper #100Abrasive paper #120 Abrasive paper #150Abrasive paper #180 Abrasive paper #240 Abrasive paper #280 Abrasive paper #320 Dust Collector Ass'y
ModelModel
Rated Air Pressure
Air Consumption (No load)
Motor Free Speed
Orbit Diameter
Pad Size
Paper Size
Mass (Weight)
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
mm
mm
kg
FS-100C
0.6 {6}
0.2
20,000
1.5
100 × 110
114 × 140
0.5
FS-50A
0.6 {6}
0.14
15,000
1.2
75 × 82
70 × 114
0.5
• Air Hose H Ass'y : 1 set• Bushing R 1/4 × NPT 1/4 : 1 pc.• Abrasive paper #180 : 5 pcs.• Abrasive paper #240 : 5 pcs.
• Air Hose H Ass'y : 1 set• Bushing R 1/4 × NPT 1/4 : 1 pc.• Abrasive paper #180 : 5 pcs.• Abrasive paper #240 : 5 pcs.
For Free Sander FS-100C For Free Sander FS-50A
Powerful turbine motor
82 mm75 mm100 mm110 mm
FREE SANDERHANDY PNEUMATIC SANDER FREE SANDER
16
SANDING
Sands to a clean finish and more in less time.Compact and light.
Light sanding with piston movementA compact, lightweight and economical unit having amazingly low air consumption. Built rugged for long continuous hours of operation.Incorporates no gears and other complicated mechanisms.
Double Piston AlignmentSpecial double-action minimizes both noise and vibration so the operator works in more comfort.
Model
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
mm
mm
kg
LS-10
0.6 {6}
0.11
4,000
4
55 × 103
57 × 140
0.75
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Stroke
Pad Size
Abrasive Paper Size
Mass (Weight)
• Hose E Ass'y : 1 set• Bushing R 1/4 × NPT 1/4 : 1 pc.• Block Rubber Pad Ass'y : 1 set• Abrasive Paper #240 : 5 pcs.• Abrasive Paper #320 : 5 pcs.• Base Plate A Ass'y : 1 set
LS-10
Optional AccessoriesPN Description Qty
TB02244 1 pc.Dust Collector Ass'y
Special Sanding PadAn accessory Block Rubber Pad Ass'y can be easily trimmed to conform the shape beingworked.
103 mm
55 mm
PNEUMATIC RECIPROCATING SANDER LINE SANDER
LINE SANDER
17
FILING
Super efficient way of easyfiling, polishing and finishing
SH-100A
SUPER HAND replaces work.SUPER HAND is ultra-small, ultra-lightweight; yet performs with the power and efficiency of a much larger tool to meet user requirements of filling, chamfering and other jobs.It comes with the quick-change tool points for different jobs. You can work on steel, glass, brass, aluminium, wood and other materials silently. It also handles scores of big jobs with speed and ease.
Model
Rubber Pad Ass'y for SH-100A
Supporter Ass'y for SH-100A
ASH-800Model
Optional Accessories
PN Description QtyTA9A222TA9A223
TA9A224
TA9A225TA91752TA94625TB04319
5 pcs.5 pcs.
5 pcs.
5 pcs.1 set1 set1 set
Rat Tail SF-10Triangular Taper File SF-11 Half Rounded File(Rat Tail/Double Cut) SF-12Flat Bastard File SF-13Rubber Pad Ass'y for SH-100ASupporter Ass'y for SH-100ASanding Pad Ass'y for ASH-800/ASH-900
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Stroke
Max. Shank dia. of Points
Mass (Weight)
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
mm
kg
SH-100A
0.6 {6}
0.24
3,700
9
6.3
1.1
ASH-800
0.6 {6}
0.23
6,500
8
5.0
0.52
ASH-900
0.6 {6}
0.2
6,300
9
5.0
0.5
• Flat Bastard File SF-13 : 1 pc.• Rat Tail File SF-10 : 1 pc.• Triangular Taper File SF-11 : 1 pc.• Half Rounded File (Rat Tail/Double Cut) SF-12 : 1 pc.• 3 mm Hex. Socket Screw Key : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.
• Flat Bastard File SF-13 : 1 pc.• Rat Tail File SF-10 : 1 pc.• Triangular Taper File SF-11 : 1 pc.• Half Rounded File (Rat Tail/Double Cut) SF-12 : 1 pc.• 2.5 mm Hex. Socket Screw Key : 1 pc.• Hi Cupla (HA-65SNG) : 1 pc.
• Flat Bastard File SF-13 : 1 pc.• Rat Tail File SF-10 : 1 pc.• Triangular Taper File SF-11 : 1 pc.• Half Rounded File (Rat Tail/Double Cut) SF-12 : 1 pc.• 2.5 mm Hex. Socket Screw Key : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.
For Super Hand SH-100A , ASH-800 & ASH-900
Flat Bastard File SF-13
Weight reduced by half for comfortable operation over long period of timeRat Tail File SF-10
Triangular Taper File SF-11
Half Round File (Rat Tail/Double Cut) SF-12
Sanding Pad Ass'y for ASH-800/ASH-900
187 mm177 mm
SUPER HANDPORTABLE PRECISION FINISHING FILE SUPER HAND
ASH-900Model
182 mm
18
FILINGCUTTING
PNEUMATICHACKSAW SUPER SAWPORTABLE FINE
FINISHING FILE MICRO AIR HAND
Special double-piston system achieved lowvibration while cutting speed improved!!
Model
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
kg
SSW-110
0.6 {6}
0.29
7,000
11
0.62
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Stroke
Mass (Weight)
• 32 mm Saw Blade : 2 pcs.• 3 mm Hex. Socket Screw Key : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.
SSW-110
Optional Accessories
PN Description QtyTA9A005TA9A011TB00193TB00192
10 pcs.10 pcs.10 pcs.10 pcs.
32 mm Saw Blade24 mm Saw Blade18 mm Saw Blade14 mm Saw Blade
SSW-110 has many feature on the followings......
Low vibration is achieved by the special design of double piston mechanism.New adoption of piston rings minimized power loss and improved cutting efficiency.Longer piston stroke improved cutting speed so much.Rear exhaust system for chip-scattering-free operation.New double-lock throttle lever prevents unintended.Cutting Capacity : Max. plate thickness 3 mm (for Mild Steel)
205 mm
SUPER SAW
Select either one of the 2 modelsdepending on your applications.
2.2 mm
MAH-162.2mm
Stroke
0.5 mm
MAH-050.5mm
Stroke
Diamond files (5 pcs/set)
Flat end file (PN TB07502)
Triangular end file (PN TB07504)
Round end file (PN TB07503)
Half-round end file (PN TB07505)
2
2
ø3
ø3ø3
2
ø3
65
ø1
0.5
1
65
4.5
1.5
65
65
2
R1 Vice Holder (PN TB07506) Grinding stone plates such as ceramic grindingstones in the market can be also mounted.(Max size: Thickness 3.2 mm × Width 20 mm)
Mounting examples
MICRO AIR HAND
• Flat end file : 1 pc.• Round end file : 1 pc.
• Bushing R1/4 × NPT 1/4 : 1 pc.• Hex. Wrench key 2 : 1 pc.Standard Accessories
176 mm
21 mm OD
Fine reciprocating motion best forprecision parts filing
Specifications
MPa {kgf/cm2}
m3/min
min-1
mm
mm
kg
MAH-05
22,000
0.5
MAH-16
11,000
2.2
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Stroke
Shank diameter of file
Mass (Weight)
MAH-05/MAH-16Model
MAH-05
MAH-16
0.6 {6}
0.07
3
0.4
19
XChamfer
YStraight
XChamfer
YStraight
CHAMFERING
HB-15B
• Ideal for chamfering before welding• Use easy-to-replace cutting blades• Each cutting blade has four working edges for good economy• Finish a surface so fine that post-sanding is unnecessary• Column R-section can be chamfered with optional attachment• No damage of workpieces is expected as heat-hardening or oxidization will seldom happen
Chamfering up to 15C
Standard accessories• Hex. Socket Screw Key 4,5,6 mm : each 1 pc.• Spanner 24 × 27 : 1 pc.• Hook spanner 25 - 28 : 1 pc.• 3 mm T Wrench Key : 1 pc.• TA9A093 Cutting Blade 12.7 sq. 1 set(12 pcs./ set)
Optional accessories• TA9A728 Pipe Plate Ass'y for 5" to 32" (125 mm to 800 mm)
Model
Standard accessories• 3 & 4 mm Hex. Socket Screw Key : each 1 pc.• Spanner T-9F : 1 pc.
Optional accessories• TA9A386 Cutting Blade 9.525, 10 pcs./set• TA9A592 Cutting Blade 9.525 2R, 10 pcs./set• TA9A638 Cutting Blade 9.525 3R, 10 pcs./set• TA9A594 Inner Head Ass'y
Compact and light for speed chamfering• An outer R-part attachment allows chamfering of outer diameters
with a radius greater than 170 mm.• An optional inner head ass'y allows chamfering a pipe of inner diameter
larger than 100 mm (50R).
Handy Electric Chamfering Tool
MB-03A Double insulation
3C
2R, 3R
Model
278 mm
150 mm
108 mm
220 mm
295 mm295 mm
HAND BEVELER
MINI BEVELER
PORTABLE CHAMFERING TOOLS HAND BEVELER
SpecificationsModel
Power Supply (Single phase)
Rated Power Consumption
Rated Current
Chamfering Capacity
Chamfering Radius Capacity
Chamfer Angle
Rated Revolutions
Mass (Weight)
MB-03A
230 V or 115 V AC, 50/60 Hz
430
2 / 4.5
0C - 3C
2R, 3R
45˚
7,100
2.5
W
A
min-1(rpm)
kg
45˚30˚15˚
X1594
Y15
15.515.4
HB-15BMild Steel(mm)
ChamferAngle
Chamfer angle and width
Mild Steel
Model
Power Source (Single phase)
Rated Power Consumption
Rated Current
No-load Speed
Chamfering Capacity
Chamfer Angle
Mass (Weight)
Specifications
WA
min-1(rpm)
kg
115 V AC, 50/60 Hz91010.53,340
230 V AC, 50/60 Hz910
42,750
HB-15B
0C - 15C15˚ - 45˚
14
Chamfer angle, width and radius
45˚
X
3
Y
3
MB-03A
Mild Steel(mm)ChamferAngle
Round
RadiusModel
Material
Radius(mm)
MB-03A
Mild Steel
2, 3
15CMild Steel
Chamfering I-beamsChamfering I-beamsChamfering steel platesChamfering steel plates
20
XChamfer
YStraight
XChamfer
YStraight
CHAMFERING
ModelHandy Electric Chamfering Tool
EMB-0307B
3C
7C
4R
4R
Stainless Steel
Mild Steel
316.4 mm
179 mm
189.6 mm
MINI BEVELER
Standard accessories• Cutting Blade with Hole 12.7 : 1 pc.• Cutting Blade Set Screw : 1 pc.• 5 mm Hex. Socket Screw Key : 1 pc.• Spanner 8 × 10 : 1 pc.• Spanner T-15D : 1 pc.
• Sub Handle : 1 pc.• Grip Guard : 1 pc.• Ball Bearing 687zz : 1 pc.• Gauge C3 : 1 pc.
ECB-0203Electric Radial Chamfering Tool
Smoothly chamfering straight and curved edges • Applicable up to 3C (3R) mild steel chamfering, and up to 1.5C (2R) stainless steel chamfering.
• Minimum chamfering plate thickness is 2 mm (Max.0.5C)
• Cutting blade with 4-side blades per piece practices good economy.
• An optional straight plate allows chamfering a straight edge shoulder.
In case of chamfering 3R, an optional cutting blade for 3R is necessary, and chamfering 2R, an optional guide sleeve 24 mm dia, and cutting blade for 2R are necessary.
1.5C 2RStainless Steel
3C 3RMild Steel
Model
Chamfering straight edges Chamfering curved edges
136 mm
400 mm
Standard accessories• Carbon Brush Ass'y : 1 set.• 4 mm Hex. Wrench Key : 1 pc.• Cutting Blade with Hole 12.7 : 1 pc.• Cutting Blade Set Screw 4 × 7 : 1 pc.• Dust Box Ass'y : 1 set.
• Hex. Nut M8 : 2 pcs.• 8 × 25 mm Hex. Socket Set Screw : 2 pcs.• Spanner T-15D : 1 pc.• Pan Head Screw 5 × 10 : 3 pcs.
Specifications
• Chamfering up to 3C stainless steel chamfering, and up to 7C mild steel chamfering.
• Cutting blade each with cutting edges on 4 sides.
• Chamfering angle can be adjusted to any desired position at 15˚ - 45˚
• Pipe outer edge can be also chamfered with standard accessories that come with the rool.
• Dust box collects swarf and chips effectively.
Model
Power Supply
Rated Power Consumption
Rated Current
Rated Duty
Chamfer Angle
Power Cord
Mass (Weight)
EMB-0307B
220 V - 240 V AC, 50/60 Hz
1010
4.6
Continuous
0C - 7C, 2R, 3R, 4R
0C - 3C, 2R, 3R, 4R
15˚ - 45˚
4.0
3.9
CIRCUIT BEVELER
PORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER
Double insulation
Double insulation
W
A
m
kg
Mild Steel
Stainless Steel
SpecificationsECB-0203
220 V - 240 V AC, 50/60 Hz45030
11,0000C - 3C, 2R, 3R0C - 1.5C, 2R
45˚2.52.5
W
min
min-1(rpm)
m
kg
ChamferingCapacity
Mild Steel
Stainless Steel
Model
Power Supply
Rated Power Consumption
Rated Duty
Motor No-load Speed
Chamfer Angle
Power Cord
Mass (Weight)
Round
RadiusModel
Material
Radius(mm)
Mild Steel
2, 3, 4
EMB-0307B
StainlessSteel
2, 3, 4
Chamfer angle, width and radius
45˚30˚15˚
X7
3.81.5
Y7
6.65.6
X3
2.21
Y3
3.83.8
EMB-0307BChamferAngle
Mild Steel(mm)Stainless Steel(mm)
Chamfering range of operationMin. Diameter Min. Radius Min. Depth Min. Thickness
45˚
X
3
Y
3
X
1.5
Y
1.5
ECB-0203ChamferAngle
Chamfer angle, width and radius
MildSteel(mm)
StailessSteel Round
RadiusModel
Material
Radius(mm)
Mild Steel
2, 3
StainlessSteel
2
ECB-0203
ChamferingCapacity
21
XChamfer
YStraight
XChamfer
YStraight
Round
Radius
CB-02Pneumatic Radial Chamfering Tool
Optional accessories• TA9A386 : Cutting Blade 9.525 sq. Ass'y (10 pcs.)• TA9A592 : Cutting Blade 9.525 sq. R2 Ass'y (10 pcs.)
Standard accessories• Cutting Blade : 1 pc.• Adjustment gauge : 1 pc.• Spanner T-9F : 1 pc.
• Protective cap : 1 pc.• Hook Spanner 58-62 : 1 pc.• Bushing R 1/4 × NPT 1/4
Specifications
MPa {kgf/cm2}
m3/min
min-1 (rpm)
kg
Lets you chamfer easily and smoothly no matter what the curve line is
• Versatility chamfer either inner or outer edges.
• Precisely adjust chamfer dimensions with accessory gauge.
2C
2R
Model
CHAMFERING
116 mm
136 mm
CIRCUIT BEVELER
Pneumatic Chamfering ToolLever Type Ring Type
AMB-0307AMBL-0307
Standard accessories• 3 & 4 mm Hex. Socket Screw key : 1 pc. each• Spanner : 1 pc.• Hex. nut M8 : 2 pcs.• Bushing R 3/8 × NPT 3/8
• 8 × 25 Hex. Socket Set Screw : 2 pcs.• Cutting Blade Set Screw 4 × 7 : 1 pc.• Cutting Blade : 1 pc.
• Applicable to stainless steel and mild steel chamfering.
• Cutting blade with 4-side blades per piece practices good economy
• Simple to adjust chamfering depth and replace cutting blade.
• Pipe outer edge can be also processed with standard accessories.
• Chamfering angle can be adjusted to any desired position at 15˚ - 45˚.
3C
7C
4R
Stainless Steel
Mild Steel
Specifications
AMBL-0307, AMB-0307
0.6 {6}
0.9
14,000
0C - 7C or 2R, 3R, 4R
0C - 3C or 2R, 3R, 4R
15˚ - 45˚
2.9
Mild Steel
Stainless Steel
MPa {kgf/cm2}
m3/min
min-1 (rpm)
kg
NOW A SMALL AIR BEVELERDOES THE BIG JOBS, TOO
202 mm
126 mm
180 mm
AMB-0307177 mm
126 mm
180 mm
AMBL-0307
MINI BEVELER
PORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER
Model
Air Pressure
Air Consumption (No load)
Free Speed
Chamfer Angle
Mass (Weight)
Model
Air Pressure
Air Consumption (No load)
Free Speed
Chamfering Capacity
Chamfer Angle
Mass (Weight)
CB-02
0.6 {6}
0.4
13,000
0C - 2C, 2R
45˚
1.8
Chamfering range of operation
Min. Diameter Min. Radius Min. Depth
Model
Material
Radius(mm)
Mild Steel
2, 3, 4
AMBL-0307/AMB-0307
StainlessSteel
2, 3, 4
Chamfer angle, width and radius
45˚30˚15˚
X74
2.2
Y778
X3
2.21
Y3
3.83.8
Mild Steel(mm)ChamferAngle
Stainless Steel(mm)AMBL-0307/AMB-0307
45˚
X
2
Y
2
CB-02
Mild Steel(mm)ChamferAngle
Round
RadiusModel
Material
Radius(mm)
CB-02
Mild Steel
2
Chamfer angle, width and radius
Mild Steel
Chamfering Capacity
22
Optional Accessories for HAND BEVELER / MINI BEVELER / CIRCUIT BEVELER
HI CUPLA ACE
Body material SizeWorking pressurePressure resistancePacking materialWorking temp.range
SpecificationsEngineering plastics
1/4", 3/8", others1.5 MPa2.0 MPa
NBR-5˚C - 60˚C
For hose connection (PH)20PH-PLA30PH-PLA
20PM-PLA30PM-PLA
50PNG-PLA65PNG-PLA85PNG-PLA
20PFF-PLA
For 1/4" hoseFor 3/8" hose
For Rc 1/4" For Rc 3/8"
For 5 ID × 8 OD hoseFor 6.5 ID × 10 OD hoseFor 8.5 ID × 12.5 OD hose
For G 1/4"
For hose connection (SH)HA-20SHHA-30SH
HA-20SMHA-30SM
HA-50SNGHA-65SNGHA-85SNG
HA-T
For 1/4" hoseFor 3/8" hose
For Rc 1/4" For Rc 3/8"
For 5 ID × 8 OD hoseFor 6.5 ID × 10 OD hoseFor 8.5 ID × 12.5 OD hose
20P-PLA / HA-65S × 2
For female thread connection (PM) For female thread connection (SM)
For urethane hose with spring nut connection (PNG) For urethane hose with spring nut connection (SNG)
For male thread connection (PF) Hi Cupla Ace T type (for 2 branches)
Plastic Plug Hi Cupla Ace SocketP S
Plastic Cuplas with a bult-in locking mechanism!Pressure ratings comparable to steel Cuplas.
QUICK CONNECTIVE COUPLINGS FOR PNEUMATIC TOOLS HI CUPLA seriesHI CUPLA / HI CUPLA 200 (One-touch connection & Big flow rate type)
PlugFor hose connection17PH20PH30PH
10PM20PM30PM
20PF30PF40PF
20PFF
For 1/4" hoseFor 1/4" hoseFor 3/8" hose
For Rc 1/8" For Rc 1/4"For Rc 3/8"
For R 1/4" For R 3/8"For R 1/2"
For G 1/4"
40PH400PH600PH800PH40PM400PM600PM800PM
400PF600PF800PF
For 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hoseFor Rc 1/2" For Rc 1/2" For Rc 3/4" For Rc 1"
For R 1/2" For R 3/4" For R 1"
17SH20SH30SH
10SM20SM30SM
20SF30SF40SF
For 1/4" hoseFor 1/4" hoseFor 3/8" hose
For Rc 1/8" For Rc 1/4"For Rc 3/8"
For R 1/4" For R 3/8"For R 1/2"
40SH400SH600SH800SH40SM400SM600SM800SM
400SF600SF800SF
For 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hoseFor Rc 1/2" For Rc 1/2" For Rc 3/4" For Rc 1"
For R 1/2" For R 3/4" For R 1"
For hose connection
For female thread connection For female thread connection
For male thread connection For male thread connection
200-17SH200-20SH200-30SH
200-20SM200-30SM200-40SM
200-20SF200-30SF200-40SF
For 1/4" hoseFor 1/4" hoseFor 3/8" hose
For Rc 1/4" For Rc 3/8"For Rc 1/2"
For R 1/4" For R 3/8"For R 1/2"
200-40SH For 1/2" hoseFor hose connection
For female thread connection
For male thread connection
For male thread connection (parallel thiead)
SocketP S
TypeBody material SizeWorking pressurePressure resistancePacking materialWorking temp.range
Specifications
One-way shut-off cupla with an automatic shut-off valve in the socket.Important pars are hardened for excellent wear resistance and durability.
Hi CuplaSteel (chrome-plated)
1/8", 1/4", 3/8", 1/2", 3/4", 1"1.5 MPa2.0 MPa
NBR-20˚C - 80˚C
Hi Cupla 200 Steel (chrome-plated)
1/8", 1/4", 3/8", 1/2" 1.0 MPa1.5 MPa
NBR-5˚C - 60˚C
TA9A093
TB01159
TB01791
TB01651
TB01790
TA9A386
TA9A592
TA9A638
TA9A728
TB02539
TA9A594
TB02857
TB03097
TB02862
TB03424
TQ01683
Indexable Insert 12.7 Ass'y
Indexable Insert 12.7 with hole Ass'y
Indexable Insert 12.7 Ass'y R2
Indexable Insert 12.7 Ass'y R3
Indexable Insert 12.7 Ass'y R4
Indexable Insert 9.525 with hole Ass'y
Indexable Insert 9.525 Ass'y R2
Indexable Insert 9.525 Ass'y R3
Plate Ass'y for pipe
Attachment for small dia. pipe
Inner head Ass'y
Guide sleeve 24 mm dia. Ass'y
Plate Ass'y for straight line use
Dust Box Ass'y
Spanner T-9D
Spanner T-15D
12 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
1 set
1 set
1 set
1 set
1 set
1 set
1 pc.
1 pc.
HB-15B
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
EMB-0307B, AMB-0307, AMBL-0307
MB-03A, CB-02
MB-03A, CB-02
MB-03A
HB-15B
EMB-0307B, AMB-0307, AMBL-0307
MB-03A
ECB-0203
ECB-0203
ECB-0203
MB-03A, CB-02
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
For pipe 125 - 800 mm dia.
For pipe 80 - 200 mm dia.
For min. 100 mm dia.
For chamfering R2
Used with Plate Ass'y for straight line use
DescriptionPN Sales Unit Application model Remarks
23
OTHER PRODUCT LINES MACHINE TOOLS
Electric & Hydarulic Machine Tools,Labor-saving plus improved work efficiency
A wide range of unique tools for boring and punching
ATRA ACE autoPORTABLE MAGNETIC BASE AUTOMATIC DRILLING MACHINE
Model WA-3500
HANDY SELFERELECTRICALLY OPERATED HYDRAULIC PUNCHER
Model E25-0615
JETBROACH CUTTERS &HI-BROACH CUTTERS
ANNULAR CUTTERS
JETBROACH
HI-BROACH
SELFER ACEPORTABLE DOUBLE-ACTING HYDRAULIC PUNCHER
HYDARULIC PUMPfor SELFER ACE
Puncher & Pump
Double-Acting
Puncher
SELFER HA TypePORTABLE SINGLE-ACTING HYDRAULIC PUNCHER
HYDRAULIC PUMPfor SELFER HA Type
Puncher & Pump
Single-Acting
Puncher
ATRA ACE manual feedPORTABLE MAGNETIC BASE DRILLING MACHINE
Model AO-5575
ATRA ACE manual feedPORTABLE MAGNETIC BASE DRILLING MACHINE
Model WOJ-3200
24
MEDO pumps are unique products featuring a Linear-motor-driven Free Piston System.NITTO KOHKI has made available a complete series of air compressors and suction pumpsthat incorporate this revolutionary mechanism.These are quite appropriate as air sourcesor suction power units for variouspneumatically operated equipmentand apparatus in advanced industries.
Professional Tools for High Technology
DLV7300 SeriesDLV7500/8500 SeriesDLV7000/8000 SeriesDLV7100/7200/8100/8200 SeriesDLV3100/3300 SeriesDLV5720/5720H/5740/5740H/5750 SeriesDLV5800 SeriesDLV30SP/30HP-MKG (with built-in brushless motors)
Models
NITTO KOHKI "delvo" Electric Screwdrivers are high-quality tools for professional use,with special emphasis on precise control of torque and long life. They apply just thecorrect amount of torque –with sure, positive control always at your fingertips.They're smooth and shockless in operation, too. NITTO KOHKI's customer-orientedservice system is directly connected to sales agents to ensure thatyou can use "delvo" Electric Screwdrivers with confidence.
DLV5720/5720H/5740 Series
TW-00/TW-0/TW-3/TW-5/TW-9/TW-15/TW-22/TW-30/TW-40/TW-50/TW-60/TW-70
TIGON Spring Balancer ImprovesWork Safety & Efficiency
Models
Capacities ranging from 0.5 - 70 kg.
DLV30SP-MKG
DLV30HP-MKG
OTHER PRODUCT LINES"delvo" Electric Screwdrivers / Spring Balancer
Linear-motor-driven Free Piston System
25
SAFETY GUIDE
Safety Precautions
Be sure to read and understand all safety precautions mentioned below and to follow the instructions given to operate eachNitto Kohki brand tool as stated in the operator’s manual. Keep operators manual close by when operating machines or toolsfor reference of safe operation and precautions.
Failure to observe the following warnings may cause a potentially hazardous situation, which if not corrected could resultin serious injury or death. To prevent the risk of fire, electric shock, and/or personal injury, proper safety guidelines shouldbe followed at all times.
Warning for ALL Machines and Tools
Notice for Air ToolsNotice for Electric Tools• Air pressure at the inlet of the tool must not exceed 0.6 MPa (6 kgf/cm2).
• Always keep the work area free from clutter and potentially dangerous conditions such as hanging power cords, working debris, air hoses, and garbage to prevent accidents from occurring.
• Consider proper working environments for each tool carefully. Do not expose tools to extreme amounts of moisture or direct contact with water or rain. Keep area well lit at all times to prevent hidden dangers and never operate the equipment near flammable liquids or in gaseous or explosive atmospheres.
• Keep all tools and tool accessories away from children and all unauthorized personnel. Serious injury or possible death may result from machines being handled by children.
• Properly store machines and accessories while not in use. They should be kept in a dry, locked-up location out of reach of children or unauthorized personnel.
• Improper or negligent use of tools will cause increased maintenance costs, and the amount of time in which to complete the job. Always let the tool do the work at the rate of which it was designed. Best performance is always achieved by reading and understanding the proper operation of each machine or tool.
• Always wear safety glasses and protective hand and foot wear during or around operating tools. Wear a protective hair covering to contain long hair. Do not wear loose clothing and/or accessories as they may be caught in moving parts and inflict serious injury or possible death.
• Wear respiratory protection when working in an environment where dust particles are generated during operation.
• Do not over-reach or allow yourself to become unstable during tool operation and always maintain a correct posture.
• Use clamps or a vise to secure the work piece tightly and eliminate vibration. Never hold the work piece with your hands, keep both hands on the tool for increased productivity.
• Use the right tool or machine that can complete the job within its specifications. Do not attempt to adapt smaller machines or tools to complete a job designed for heavy-duty equipment. Do not use the tools for other than what they were designed for. There is a right tool for each job, be aware of tool limitations and never overload.
• Make sure to inspect all external screws, nuts, bolts and attached accessories are fastened tightly and secure prior to each use. All moving parts should be free from obstruction and allowed to operate smoothly. Any damaged or missing parts should be repaired or replaced by the sales agent or distributor from which the tool was originally purchased. Do not use machines or tools which cannot be activated or stopped with a power switch or lever.
• Do not use any machine with a damaged, frayed, cut, or deteriorated power cords or air hoses. Always replace at the first sign of damage.
• Always remove all tools required to adjust, add, or remove parts from tools prior to use to prevent tool damage or user injury.
• Always avoid an unexpected start by having all power buttons or levers in the off position prior to attaching to a power or air supply. Never carry tools with your finger on the on/off switch or lever when the power or air supply is attached.
• Do not use the power or air supply lines to move, carry or support the tool during usage or transportation. Do not place the power or air line near a heat source, oil, water, or items with sharp edges.
• Never leave a machine or tool running unattended. Keep a firm grip on the designated areas of the machine or tool until it comes to a complete stop. Always turn the power switch or lever to the off position and disconnect from the power source when not in use.
• Do not disassemble or modify a tool to complete a job other than what it was designed for. This will void any warranty on the equipment and may cause serious personal injury or possible death.
• Maintenance is necessary for all machines and tools. Always maintain blades and cutters properly and replace when edges become damaged or are not sharp enough for safe operation. Follow the instruction manual for lubrication needs and adjustment points if applicable. Check the power and air supply lines periodically and change accordingly to safety regulations. If an extension line is adopted, always make sure that it meets or exceeds tool requirements for amperage or air supply before using and is rated for outdoor usage. Change supply lines whenever they are found to be defective or damaged. Keep the grip and handles dry and clean of grease or oil so that it will not disturb proper operation.
• Switch off and disconnect from power source before servicing equipment or changing accessories.
• Be alert and pay close attention to the work being performed at all times. Do not operate machines or tools when heavily fatigued. Users should be aware of all circumstances surrounding their application.
• Use only recommended parts and accessories as per individual machine or tool operator manuals. Use of improper accessories or attachments may result in serious injury or possible death.
• All repairs and services must be performed by authorized Nitto Kohki dealers or technicians.
• Do not deface or remove any label, warning indicator, or nameplate associated with each machine or tool.
• The power source must be limited to the individual tools specifications as stated on the nameplate or instruction manual.
• Make sure that all machine and power tools are properly grounded at all times (excludes double-insulated tools). Always use a GFCI (Ground-Fault-Circuit- Interrupt) to protect the user and surrounding persons from electric shock.
• Be aware of low voltage situations. Improperly gauged extension cords or power cords used or shared with other electrical devices will cause all tools on the line to not run at optimal performance. This condition may result in damage to the machine and/or operator.
26
This catalog is printed using environmentally friendly paper and vegetable oil inks.FSCマーク
DISTRIBUTED BY
Printed in Japan 11JW05- 1
Head Office 9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555 JapanPhone : +81-3-3755-1111 Fax : +81-3-3753-8791NITTO KOHKI CO.,LTD.
E-mail : [email protected] : www.nitto-kohki.co.jp/e
Specifications and designs are subject to change at any time without notice.
Overseas Affiliates/Offices
NITTO KOHKI U.S.A. INC.TEL:+1-630-924-9393 FAX:+1-630-924-0303
NITTO KOHKI EUROPE CO., LTD.(UK)TEL:+44-1923-239-668 FAX:+44-1923-248-815
NITTO KOHKI DEUTSCHLAND GMBHTEL:+49-7157-22436 FAX:+49-7157-22437
NITTO KOHKI AUSTRALIA PTY. LTD.TEL:+61-7-3340-4600 FAX:+61-73340-4640
NITTO KOHKI CO., LTD. SINGAPOREBRANCHTEL:+65-6227-5360 FAX:+65-6227-0192
NITTO KOHKI CO., LTD. BANGKOKREPRESENTATIVE OFFICETEL:+66-2-632-0307 FAX:+66-2-632-0308
NITTO KOHKI CO., LTD. SHANGHAIREPRESENTATIVE OFFICETEL:+86-21-6415-3935 FAX:+86-21-6472-6957
NITTO KOHKI CO., LTD. SHENZHENREPRESENTATIVE OFFICETEL:+86-755-8375-2185 FAX:+86-755-8375-2187
NITTO KOHKI CO., LTD. SEOULREPRESENTATIVE OFFICE