NTC Thermistors
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
EU RoHS Compliant
For r o ur 'Mur A ro c o '
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Contents
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
Temperature Sensor Thermo String Type p25
Temperature Sensor Thermo String Type Specifications and Test Methods p26
Part Numbering p2
Basic Characteristics p6
Product specifications are as of December 2014.Temperature Sensor and Compensation 0201 (0603) Size p7
1
Temperature Sensor and Compensation 0402 (1005) Size p8
2
Temperature Sensor and Compensation 0603 (1608) Size p10
3
Temperature Sensor and Compensation 0805 (2012) Size p12
4
5
Temperature Sensor Lead Type p28
Temperature Sensor Lead Type Specifications and Test Methods p29
6
Inrush Current Suppression Lead Type p36
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) p38
Inrush Current Suppression Lead Type !Caution/Notice p42
Inrush Current Suppression Lead Type Package p44
8
Temperature Sensor Lead Insulation Type (Radial Type) p30
Temperature Sensor Lead Insulation Type (Radial Type) Specifications and Test Methods p31
7
Temperature Sensor and Compensation Chip Type Standard Land Pattern Dimensions p13
Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) p14
Temperature Sensor and Compensation Chip Type !Caution/Notice p18
Temperature Sensor and Compensation Chip Type Package p22
Temperature Sensor Thermo String/Lead Type Temperature Characteristics (Center Value) p32
Temperature Sensor Thermo String/Lead Type !Caution/Notice p33
Temperature Sensor Thermo String/Lead Type Package p35
1
2
3
4
5
6
7
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
2
o Part Numbering
qProduct ID
wSeries
yResistance Tolerance
uIndividual Specifications
NTC Thermistors for Temp. Sensor and Compensation Chip Type
NC NTC Thermistors Chip Type
D
F
E
J
P
±0.5%
±1%
±3%
±5%
03
Individual Specifications
Product ID
Code
Code
Series
Resistance Tolerance
Code
(Part Number)
tResistance
Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures.
Structures and other specifications are expressed by two figures.
102
103
104
Ex.
Ex.
1kΩ
10kΩ
100kΩ
Code Resistance
Standard Type
iPackaging
RA
RB
RC
RL
Plastic Taping 4mm Pitch (4000 pcs.)
Paper Taping 4mm Pitch (4000 pcs.)
Paper Taping 2mm Pitch (10000 pcs.)
Paper Taping 2mm Pitch (15000 pcs.)
Code Packaging
Plated Termination Series
eDimensions (LgW)
03
15
18
21
Code Dimensions (LgW)
0.60g0.30mm
1.00g0.50mm
1.60g0.80mm
2.00g1.25mm
EIA
0201
0402
0603
0805
rTemperature Characteristics
XC
XF
XH
XM
XQ
XV
XW
WB
WD
WF
WL
WM
Code Temperature Characteristics
Nominal B-Constant 3100e3149K
Nominal B-Constant 3250e3299K
Nominal B-Constant 3350e3399K
Nominal B-Constant 3500e3549K
Nominal B-Constant 3650e3699K
Nominal B-Constant 3900e3949K
Nominal B-Constant 3950e3999K
Nominal B-Constant 4050e4099K
Nominal B-Constant 4150e4199K
Nominal B-Constant 4250e4299K
Nominal B-Constant 4450e4499K
Nominal B-Constant 4500e4549K
y
J
e
18
w
P
r
XH
t
103
u
03
i
RBNC
q
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
3
qProduct ID
wIndividual Specifications
uLead Wire Type
iShape of the Lead Wire Kink
NTC Thermistor for Temperature Sensor Thermo String Type
NXF NTC Thermistors Sensor Thermo String TypeA
ø0.3mm Copper Lead Wire with Polyurethane Coat
1
2
Shape of the Lead Wire Kink
Product ID Code Lead Wire Type
Code
(Part Number)
tResistance
Expressed by three figures. The unit is (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures.
103
104
Ex.
10kΩ
100kΩ
Code Resistance
Twisted Lead Wire Type
Standard Type
T Commercial Type
Code
yResistance Tolerance
F ±1%
Code Resistance Tolerance
oPackaging
B Bulk
Code Packaging
!0Dimensions (Full Length)
025
030
040
050
060
070
080
090
100
110
120
130
140
150
25mm
30mm
40mm
50mm
60mm
70mm
80mm
90mm
100mm
110mm
120mm
130mm
140mm
150mm
Code Dimensions (Full Length)
Individual Specifications
rTemperature Characteristics
XH
XV
WB
WF
Nominal B-Constant 3350–3399K
Nominal B-Constant 3900–3949K
Nominal B-Constant 4050–4099K
Nominal B-Constant 4250–4299K
Code Temperature Characteristics
eChip Dimensions
15 1.00 x 0.50mm
Code Dimensions (LxT)
0402
EIA
t
103
w
T
e
15
r
XH
y
F
u
A
i
2
o
B
!0
025NXF
q
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
4
qProduct ID
wIndividual Specifications
uLead Wire Type
iShape of the Lead Wire
NTC Thermistor for Temperature Sensor/Lead Type
NXR NTC Thermistor Sensor/Lead Type A
Lead Type: ø0.4mm Copper-clad Fe Wire, TinnedLead Insulation Type: ø0.46mm Cu Wire with Coat
1
3
5
Shape of the Lead Wire
Product ID Code Lead Wire Type
Code
(Part Number)
tResistance
Expressed by three figures. The unit is (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures.
202
103
104
Ex.
2.0kΩ
10kΩ
100kΩ
Code Resistance
Lead Spacing 2.5mm
Lead Spacing 5.0mm
Lead Spacing 2.5mm (Insulation Type)
T Commercial Type
Code
yResistance Tolerance
F
E
J
±1%
±3%
±5%
Code Resistance Tolerance
oPackaging
A
B
Ammo Pack Taping
Bulk
Code Packaging
!0Dimensions (Full Length)
010
020
025
030
035
040
045
016
10mm
20mm
25mm (Insulation Type only)
30mm
35mm (Insulation Type only)
40mm
45mm (Insulation Type only)
16mm (Taping Type/Lead distance between reference and bottom planes)
Code Dimensions (Full Length)
Individual Specifications
rTemperature Characteristics
XH
XM
XV
WB
WF
Nominal B-Constant 3350–3399K
Nominal B-Constant 3500–3549K
Nominal B-Constant 3900–3949K
Nominal B-Constant 4050–4099K
Nominal B-Constant 4250–4299K
Code Temperature Characteristics
eChip Dimensions
15 1.00 x 0.50mm
Code Dimensions (LxT)
t
103
w
T
e
15
r
XH
y
F
u
A
i
1
o
B
!0
040NXR
q
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
5
y
B0
e
160
r
L
t
BMNT
q w
PA7
qProduct ID
wSeries
rResistance Tolerance
tIndividual Specifications
NTC Thermistors for Inrush Current Suppression Lead Type
NT NTC Thermistors L
PA5
PA6
PA7
PA9
PAA
PAD
PAJ
PAN
±15%
DK
Individual Specifications
Product ID
Code
Code
Series
Resistance Tolerance
Code
(Part Number)
eResistance
Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits.
The lead structure and other specifications are expressed by two-digit alphanumerics.
3R0
100
Ex.
3Ω
10Ω
Code Resistance
Standard (Bulk)
yPackaging
A0
B0
Ammo Pack Taping
Bulk
Code Packaging
Body Diameter
ø18mm, ø22mm
DN Standard (Bulk) ø10mm, ø13mm
BM Standard Type (Bulk) ø7mm, ø9mm
B1 Standard Type (Ammo Pack) ø7mm, ø9mm
D6 Standard Type (Ammo Pack) ø10mm, ø13mm
Inrush CurrentSuppressionLead Type
ø5mm
ø6mm
ø7mm
ø9mm
ø10mm
ø13mm
ø18mm
ø22mm
Nominal Body Diameter
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
6
1. Zero-power Resistance of Thermistor: R
2. B-Constant
R=R0 expB (1/T-1/T0) ..............(1)R: Resistance in ambient temperature T (K)(K: absolute temperature)R0: Resistance in ambient temperature T0 (K)B: B-Constant of Thermistor
as (1) formulaB=Rn (R/R0) / (1/T-1/T0) ............(2)
3. Thermal Dissipation ConstantWhen electric power P (mW) is spent in ambient temperature T1 and thermistor temperature rises T2, the formula is as followsP=C (T2-T1) ..................(3)C: Thermal dissipation constant (mW/°C)Thermal dissipation constant is varied with dimensions, measurement conditions, etc.
4. Thermal Time ConstantPeriod in which the thermistor's temperature will change 63.2% of its temperature difference from ambient temperature T0 (°C) to T1 (°C).
Resistance vs. Temperature
!Basic Characteristics
!Performance
Thermal Time Constant
Item
Resistance
Condition
Measured by zero-power in specified ambient temperature.
Rated Electric PowerShows the required electric power that causes the thermistor's temperature to rise to a specified temperature by self-heating, at ambient temperature of 25 °C.
Permissible Operating Current It is possible to keep the thermistor's temperature rising max. 1°C.
Thermal DissipationConstant
Shows necessary electric power that Thermistor's temperature rises 1°C by self-heating.It is calculated by the next formula (mW/°C).
B-Constant
Calculated between two specified ambient temperatures by the next formula.T and T0 is absolute temperature (K).
Rn (R/R0)B =
1/TY1/T0
PC =
TYT0
102
101
Res
ista
nce
vs. T
empe
ratu
re C
hara
cter
istic
s, R
/R25
–20Temperature (°C)
0 20 40 60 80 12010010–2
10–1
1
B=3450B=3900B=4100
Basic Characteristics
T1
T0
Time
63.2%
X
Tem
pera
ture
Please inquire about test conditions and ratings.
NTC ThermistorsTemperature Sensor and Compensation 0201 (0603) Size
Electrode(Ag System + Ni Plating + Sn Plating)
0.15±0.05 0.15±0.050.60±0.03
(in mm)
0.30
±0.
030.
30±
0.03
Part NumberResistance
(25°C)(ohm)
B-Constant(25-50°C)
(K)
B-Constant(25-80°C)
(Reference Value) (K)
B-Constant(25-85°C)
(Reference Value) (K)
B-Constant(25-100°C)
(Reference Value) (K)
Permissible OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
NCP03XM102p05RL 1.0k 3500 ±1% 3539 3545 3560 1.00 100 1
NCP03XM152p05RL 1.5k 3500 ±1% 3539 3545 3560 0.81 100 1
NCP03XM222p05RL 2.2k 3500 ±1% 3539 3545 3560 0.67 100 1
NCP03XM332p05RL 3.3k 3500 ±1% 3539 3545 3560 0.55 100 1
NCP03XM472p05RL 4.7k 3500 ±1% 3539 3545 3560 0.46 100 1
NCP03XH682p05RL 6.8k 3380 ±1% 3428 3434 3455 0.38 100 1
NCP03XH103F05RL 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1
NCP03XH103p05RL 10k 3380 ±1% 3428 3434 3455 0.31 100 1
NCP03XV103p05RL 10k 3900 ±1% 3930 3934 3944 0.31 100 1
NCP03XH153p05RL 15k 3380 ±1% 3428 3434 3455 0.25 100 1
NCP03XH223p05RL 22k 3380 ±1% 3428 3434 3455 0.21 100 1
NCP03WF333p05RL 33k 4250 ±1% 4303 4311 4334 0.17 100 1
NCP03WB473p05RL 47k 4050 ±3% 4101 4108 4131 0.14 100 1
NCP03WL473p05RL 47k 4485 ±1% 4537 4543 4557 0.14 100 1
NCP03WF683p05RL 68k 4250 ±1% 4303 4311 4334 0.12 100 1
NCP03WL683p05RL 68k 4485 ±1% 4537 4543 4557 0.12 100 1
NCP03WF104F05RL 100k ±1% 4250 ±1% 4303 4311 4334 0.10 100 1
NCP03WF104p05RL 100k 4250 ±1% 4303 4311 4334 0.10 100 1
NCP03WL104p05RL 100k 4485 ±1% 4537 4543 4557 0.10 100 1
NCP03WL154p05RL 150k 4485 ±1% 4537 4543 4557 0.08 100 1
NCP03WL224p05RL 220k 4485 ±1% 4537 4543 4557 0.06 100 1
p is fi lled with resistance tolerance codes (E: ±3%, J: ±5%).
Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125°C by self-heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment.
c Features1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability3. High accuracy in resistance and B-Constant4. Refl ow soldering possible5. NCP series are recognized by UL/cUL. (UL1434, File No.E137188)
c Applications1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications2. Temperature sensor for rechargeable batteries
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
1
NTC ThermistorsTemperature Sensor and Compensation 0402 (1005) Size
Electrode(Ag System + Ni Plating + Sn Plating)
0.25±0.10 0.25±0.101.0±0.05
(in mm)
0.5±
0.05
0.5±
0.05
Continued on the following page.
Part NumberResistance
(25°C)(ohm)
B-Constant(25-50°C)
(K)
B-Constant(25-80°C)
(Reference Value) (K)
B-Constant(25-85°C)
(Reference Value) (K)
B-Constant(25-100°C)
(Reference Value) (K)
Permissible OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
NCP15XC220p03RC 22 3100 ±3% 3126 3128 3136 6.70 100 1
NCP15XC330p03RC 33 3100 ±3% 3126 3128 3136 5.50 100 1
NCP15XC470p03RC 47 3100 ±3% 3126 3128 3136 4.60 100 1
NCP15XC680p03RC 68 3100 ±3% 3126 3128 3136 3.80 100 1
NCP15XF101p03RC 100 3250 ±3% 3282 3284 3296 3.10 100 1
NCP15XF151p03RC 150 3250 ±3% 3282 3284 3296 2.50 100 1
NCP15XM221p03RC 220 3500 ±3% 3539 3545 3560 2.10 100 1
NCP15XM331p03RC 330 3500 ±3% 3539 3545 3560 1.70 100 1
NCP15XQ471p03RC 470 3650 ±2% 3688 3693 3706 1.40 100 1
NCP15XQ681p03RC 680 3650 ±3% 3688 3693 3706 1.20 100 1
NCP15XQ102p03RC 1.0k 3650 ±2% 3688 3693 3706 1.00 100 1
NCP15XW152p03RC 1.5k 3950 ±3% 3982 3987 3998 0.81 100 1
NCP15XW222p03RC 2.2k 3950 ±3% 3982 3987 3998 0.67 100 1
NCP15XW332p03RC 3.3k 3950 ±3% 3982 3987 3998 0.55 100 1
NCP15XM472p03RC 4.7k 3500 ±2% 3539 3545 3560 0.46 100 1
NCP15XW472p03RC 4.7k 3950 ±3% 3982 3987 3998 0.46 100 1
NCP15XW682p03RC 6.8k 3950 ±3% 3982 3987 3998 0.38 100 1
NCP15XH103D03RC 10k ±0.5% 3380 ±0.7% 3428 3434 3455 0.31 100 1
NCP15XH103F03RC 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1
NCP15XH103p03RC 10k 3380 ±1% 3428 3434 3455 0.31 100 1
NCP15XV103p03RC 10k 3900 ±3% 3930 3934 3944 0.31 100 1
NCP15XW153p03RC 15k 3950 ±3% 3982 3987 3998 0.25 100 1
NCP15XW223p03RC 22k 3950 ±3% 3982 3987 3998 0.21 100 1
NCP15WL223p03RC 22k 4485 ±1% 4537 4543 4557 0.21 100 1
NCP15WB333p03RC 33k 4050 ±3% 4101 4108 4131 0.17 100 1
NCP15WL333p03RC 33k 4485 ±1% 4537 4543 4557 0.17 100 1
Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment.
c Features1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability3. High accuracy in resistance and B-Constant4. Refl ow soldering possible5. Same B-constant in the same resistance in the three sizes (0805 size / 0603 size / 0402 size) Downsize is easy for design.6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188)
c Applications1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation in general use of electric circuits
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
2
Continued from the preceding page.
p is fi lled with resistance tolerance codes (E: ±3%, J: ±5%).
Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125°C by self-heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
Part NumberResistance
(25°C)(ohm)
B-Constant(25-50°C)
(K)
B-Constant(25-80°C)
(Reference Value) (K)
B-Constant(25-85°C)
(Reference Value) (K)
B-Constant(25-100°C)
(Reference Value) (K)
Permissible OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
NCP15WB473D03RC 47k ±0.5% 4050 ±0.5% 4101 4108 4131 0.14 100 1
NCP15WB473F03RC 47k ±1% 4050 ±1% 4101 4108 4131 0.14 100 1
NCP15WB473p03RC 47k 4050 ±1% 4101 4108 4131 0.14 100 1
NCP15WL473p03RC 47k 4485 ±1% 4537 4543 4557 0.14 100 1
NCP15WD683p03RC 68k 4150 ±3% 4201 4209 4232 0.12 100 1
NCP15WL683p03RC 68k 4485 ±1% 4537 4543 4557 0.12 100 1
NCP15WF104D03RC 100k ±0.5% 4250 ±0.5% 4303 4311 4334 0.10 100 1
NCP15WF104F03RC 100k ±1% 4250 ±1% 4303 4311 4334 0.10 100 1
NCP15WF104p03RC 100k 4250 ±1% 4303 4311 4334 0.10 100 1
NCP15WL104p03RC 100k 4485 ±1% 4537 4543 4557 0.10 100 1
NCP15WL154p03RC 150k 4485 ±1% 4537 4543 4557 0.08 100 1
NCP15WM154p03RC 150k 4500 ±3% 4571 4582 4614 0.08 100 1
NCP15WM224p03RC 220k 4500 ±3% 4571 4582 4614 0.06 100 1
NCP15WM474p03RC 470k 4500 ±3% 4571 4582 4614 0.04 100 1
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
2
NTC ThermistorsTemperature Sensor and Compensation 0603 (1608) Size
Electrode(Ag System + Ni Plating + Sn Plating)
0.2-0.6 0.2-0.61.6±0.15
(in mm)
0.8±
0.15
0.8±
0.15
Continued on the following page.
Part NumberResistance
(25°C)(ohm)
B-Constant(25-50°C)
(K)
B-Constant(25-80°C)
(Reference Value) (K)
B-Constant(25-85°C)
(Reference Value) (K)
B-Constant(25-100°C)
(Reference Value) (K)
Permissible OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
NCP18XF101p03RB 100 3250 ±3% 3282 3284 3296 3.10 100 1
NCP18XF151p03RB 150 3250 ±3% 3282 3284 3296 2.50 100 1
NCP18XM221p03RB 220 3500 ±3% 3539 3545 3560 2.10 100 1
NCP18XM331p03RB 330 3500 ±3% 3539 3545 3560 1.70 100 1
NCP18XQ471p03RB 470 3650 ±2% 3688 3693 3706 1.40 100 1
NCP18XQ681p03RB 680 3650 ±3% 3688 3693 3706 1.20 100 1
NCP18XQ102p03RB 1.0k 3650 ±2% 3688 3693 3706 1.00 100 1
NCP18XW152p03RB 1.5k 3950 ±3% 3982 3987 3998 0.81 100 1
NCP18XW222p03RB 2.2k 3950 ±3% 3982 3987 3998 0.67 100 1
NCP18XW332p03RB 3.3k 3950 ±3% 3982 3987 3998 0.55 100 1
NCP18XM472p03RB 4.7k 3500 ±2% 3539 3545 3560 0.46 100 1
NCP18XW472p03RB 4.7k 3950 ±3% 3982 3987 3998 0.46 100 1
NCP18XW682p03RB 6.8k 3950 ±3% 3982 3987 3998 0.38 100 1
NCP18XH103D03RB 10k ±0.5% 3380 ±0.7% 3428 3434 3455 0.31 100 1
NCP18XH103F03RB 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1
NCP18XH103p03RB 10k 3380 ±1% 3428 3434 3455 0.31 100 1
NCP18XV103p03RB 10k 3900 ±3% 3930 3934 3944 0.31 100 1
NCP18XW153p03RB 15k 3950 ±3% 3982 3987 3998 0.25 100 1
NCP18XW223p03RB 22k 3950 ±3% 3982 3987 3998 0.21 100 1
NCP18WB333p03RB 33k 4050 ±3% 4101 4108 4131 0.17 100 1
NCP18WB473D03RB 47k ±0.5% 4030 ±0.5% 4101 4108 4131 0.14 100 1
NCP18WB473F10RB 47k ±1% 4050 ±1.5% 4101 4108 4131 0.14 100 1
NCP18WB473p03RB 47k 4050 ±2% 4101 4108 4131 0.14 100 1
NCP18WD683p03RB 68k 4150 ±3% 4201 4209 4232 0.12 100 1
NCP18WF104D03RB 100k ±0.5% 4200 ±0.5% 4255 4260 4282 0.10 100 1
NCP18WF104F12RB 100k ±1% 4200 ±1% 4255 4260 4282 0.10 100 1
Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment.
c Features1. Excellent solderability and high stability in the application's environment2. Excellent long-term stability3. High accuracy in resistance and B-constant4. Flow / Refl ow soldering possible5. Same B-Constant in the same resistance in the three sizes (0805 size / 0603 size / 0402 size) Downsize is easy for design.6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188)
c Applications1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation in general use of electric circuits
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
3
Continued from the preceding page.
Part NumberResistance
(25°C)(ohm)
B-Constant(25-50°C)
(K)
B-Constant(25-80°C)
(Reference Value) (K)
B-Constant(25-85°C)
(Reference Value) (K)
B-Constant(25-100°C)
(Reference Value) (K)
Permissible OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
NCP18WF104p03RB 100k 4250 ±2% 4303 4311 4334 0.10 100 1
NCP18WM154p03RB 150k 4500 ±3% 4571 4582 4614 0.08 100 1
NCP18WM224p03RB 220k 4500 ±3% 4571 4582 4614 0.06 100 1
NCP18WM474p03RB 470k 4500 ±3% 4571 4582 4614 0.04 100 1
p is fi lled with resistance tolerance codes (E: ±3%, J: ±5%).
Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125°C by self-heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
3
NTC ThermistorsTemperature Sensor and Compensation 0805 (2012) Size
2.0±0.2
0.2-0.7 0.2-0.7
Electrode(Ag System + Ni Plating + Sn Plating)
1.25
±0.
20.
85±
0.15
(in mm)
Part NumberResistance
(25°C)(ohm)
B-Constant(25-50°C)
(K)
B-Constant(25-80°C)
(Reference Value) (K)
B-Constant(25-85°C)
(Reference Value) (K)
B-Constant(25-100°C)
(Reference Value) (K)
Permissible OperatingCurrent (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
NCP21XM221J03RA 220 ±5% 3500 ±3% 3539 3545 3560 3.00 200 2
NCP21XQ471J03RA 470 ±5% 3650 ±3% 3688 3693 3706 2.00 200 2
NCP21XQ102J03RA 1.0k ±5% 3650 ±3% 3688 3693 3706 1.40 200 2
NCP21XW222J03RA 2.2k ±5% 3950 ±3% 3982 3987 3998 0.90 200 2
NCP21XM472J03RA 4.7k ±5% 3500 ±3% 3539 3545 3560 0.65 200 2
NCP21XV103J03RA 10k ±5% 3900 ±3% 3930 3934 3944 0.44 200 2
NCP21XW153J03RA 15k ±5% 3950 ±3% 3982 3987 3998 0.36 200 2
NCP21XW223J03RA 22k ±5% 3950 ±3% 3982 3987 3998 0.30 200 2
NCP21WB333J03RA 33k ±5% 4050 ±3% 4101 4108 4131 0.24 200 2
NCP21WB473J03RA 47k ±5% 4050 ±3% 4101 4108 4131 0.20 200 2
NCP21WF104J03RA 100k ±5% 4250 ±3% 4303 4311 4334 0.14 200 2
Rated Electric Power shows the required electric power that the thermistor's temperature rise to 125°C by self-heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment.
c Features1. Excellent solderability and high stability in the application's environment2. Excellent long-term stability3. High accuracy in resistance and B-constant4. Flow / Refl ow soldering possible5. Same B-Constant in the same resistance in the three sizes (0805 size / 0603 size / 0402 size) Downsize is easy for design.6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188)
c Applications1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation in general use of electric circuits
12
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
4
Temperature Sensor and Compensation Chip Type Standard Land Pattern Dimensions
Chip LandSolder Resist
b a
c
Part Number SolderingMethods Chip (LxW)
Dimensions (mm)a b c
NCP03NCP15
NCP18
NCP21
Reflow SolderingReflow SolderingFlow Soldering
Reflow SolderingFlow Soldering
Reflow Soldering
0.6x0.31.0x0.5
1.6x0.8
2.0x1.25
0.250.4
0.6-1.00.6-0.81.0-1.11.0-1.1
0.30.4-0.50.8-0.90.6-0.70.9-1.00.6-0.7
0.30.5
0.6-0.80.6-0.81.0-1.21.0-1.2
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125
Temp. ( C)B-ConstantResistance
Part Number
355.823273.975213.003166.943131.997105.31884.67068.62855.98145.85937.81931.39626.21122.00018.56015.73513.40311.4629.8428.4887.3486.3995.5954.8964.2993.7953.3602.9832.6562.3672.1161.9011.7121.543
NCP15XC220
Resistance (Ω)533.734410.962319.504250.415197.996157.978127.005102.94283.97268.78956.72847.09439.31733.00027.84023.60320.10417.19314.76312.73211.0229.5988.3927.3456.4485.6925.0404.4743.9833.5513.1732.8512.5682.314
NCP15XC330
Resistance (Ω)760.166585.310455.051356.652281.994224.998180.886146.614119.59697.97280.79467.07355.99747.00039.65133.61628.63324.48721.02618.13315.69813.67011.95210.4619.1848.1077.1796.3735.6735.0574.5204.0603.6573.296
NCP15XC470
Resistance (Ω)
Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125
11822.4738767.7456570.2244971.7843796.9332923.4002269.5991775.2251399.0501110.220887.257713.463577.375470.000384.800316.757262.177218.069182.297153.150129.249109.55193.28179.75068.44658.99651.03644.33238.64033.79029.66426.12323.09120.472
NCPppXQ471
Resistance (Ω)17104.85412685.2489505.8557193.2195493.4364229.5993283.6752568.4112024.1581606.2751283.6911032.245835.351680.000556.733458.287379.320315.504263.749221.579186.998158.499134.960115.38399.02985.35673.83964.14055.90548.88842.91837.79533.40929.618
NCPppXQ681
Resistance (Ω)
Continued on the following page.
3100K 3100K 3100K
3650K 3650K
22Ω 33Ω 47Ω
470Ω 680Ω
Temp. (°C)B-ConstantResistance
Part Number
1099.815846.832658.372516.007407.991325.529261.707212.123173.033141.747116.89497.04281.01668.00057.36848.63641.42635.42830.42126.23522.71219.77817.29315.13413.28811.72910.3869.2208.2087.3176.5395.8745.2914.768
NCP15XC680
Resistance (Ω)3100K68Ω
1824.1751390.6851070.653831.138650.960514.441409.700328.877265.759215.785176.395145.161120.152100.00083.66970.36159.45650.47043.02936.83031.64927.36423.75620.65118.01115.80013.90812.26310.8449.6228.5637.6486.8506.162
NCPppXF101
Resistance (Ω)2736.2622086.0281605.9791246.708976.440771.661614.550493.315398.639323.677264.592217.742180.228150.000125.503105.54189.18475.70564.54355.24647.47341.04535.63430.97627.01623.70020.86218.39416.26514.43412.84411.47210.2759.243
NCPppXF151
Resistance (Ω)4947.9043703.7552798.8732135.8871645.0371278.0341000.620789.612627.752502.474405.010328.480268.044220.000181.576150.668125.681105.33688.71775.05963.77754.41546.63140.11534.63730.01326.11022.79019.95717.54115.45313.66312.11410.778
NCPppXM221
Resistance (Ω)7421.8565555.6324198.3093203.8312467.5551917.0511500.9301184.418941.628753.711607.514492.720402.066330.000272.365226.002188.521158.004133.076112.58895.66681.62269.94660.17251.95545.01939.16534.18629.93526.31223.18020.49418.17116.168
NCPppXM331
Resistance (Ω)3250K 3250K 3500K 3500K100Ω 150Ω 220Ω 330Ω
75.96154.52039.60729.10321.60116.19812.2649.3707.2195.6094.3913.4632.7512.2001.7711.4341.1690.9580.7890.6540.5450.4560.3830.3240.2750.2340.2000.1720.1490.1290.1120.0980.0850.075
NCPppXW222
Resistance (kΩ)25.15418.65513.97910.5788.0796.2204.8293.7772.9772.3621.8881.5181.2291.0000.8190.6740.5580.4640.3880.3260.2750.2330.1990.1700.1460.1260.1090.0940.0820.0720.0630.0560.0490.044
NCPppXQ102
Resistance (kΩ)51.79137.17227.00519.84314.72811.0448.3626.3894.9223.8252.9942.3611.8761.5001.2070.9780.7970.6530.5380.4460.3710.3110.2610.2210.1870.1600.1370.1170.1010.0880.0760.0670.0580.051
NCPppXW152
Resistance (kΩ)3950K3650K 3950K2.2kΩ1.0kΩ
21.26616.15012.3479.5037.3655.7474.5163.5722.8442.2801.8391.4921.2181.0000.8250.6850.5710.4790.4030.3410.2900.2470.2120.1820.1570.1360.1190.1040.0910.0800.0700.0620.0550.049
NCPppXM102
Resistance (kΩ)3500K1.0kΩ
31.89924.22518.52014.25511.0478.6216.7735.3584.2663.4192.7582.2381.8271.5001.2381.0270.8570.7180.6050.5120.4350.3710.3180.2740.2360.2050.1780.1550.1360.1200.1050.0930.0830.074
NCPppXM152
Resistance (kΩ)3500K1.5kΩ
46.78635.53027.16220.90716.20312.6449.9347.8586.2575.0154.0453.2832.6802.2001.8161.5071.2571.0530.8870.7510.6380.5440.4660.4010.3460.3000.2610.2280.2000.1750.1550.1370.1210.108
NCPppXM222
Resistance (kΩ)3500K2.2kΩ1.5kΩ
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Continued from the preceding page.
Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125
113.94181.77959.41143.65432.40124.29718.39614.05510.8298.4146.5865.1954.1263.3002.6562.1521.7531.4371.1840.9810.8170.6840.5750.4860.4120.3510.3010.2580.2230.1930.1680.1460.1280.113
NCPppXW332
Resistance (kΩ)
NCPppXV103
328.996237.387173.185127.77395.32771.74654.56441.81332.33025.19419.78515.65112.46810.0008.0726.5565.3564.4013.6353.0192.5212.1151.7811.5091.2841.0970.9410.8100.7010.6080.5300.4630.4060.358
Resistance (kΩ)293.478222.256170.021131.338102.35580.47463.75950.83840.82833.03226.88822.01018.12115.00012.47210.4228.7517.3756.2415.3024.5213.8793.3412.8872.5032.1781.9021.6641.4611.2871.1371.0070.8950.797
NCPppXH153
Resistance (kΩ)Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125
Continued on the following page.
3950K
3900K 3380K
3.3kΩ
10kΩ 15kΩ
70.17953.29540.74331.36024.30418.96614.90111.7879.3867.5236.0674.9244.0193.3002.7242.2601.8851.5801.3311.1260.9570.8160.7000.6020.5200.4500.3920.3420.2990.2630.2320.2050.1820.162
NCPppXM332
Resistance (kΩ)3500K3.3kΩ
Temp. (°C)B-ConstantResistance
Part Number
Temp. (°C)B-ConstantResistance
Part Number
NCPppXM472
105.70579.12659.79445.63035.14427.30321.37716.86913.41110.7358.6537.0185.7264.7003.8793.2192.6852.2501.8951.6041.3631.1630.9960.8570.7400.6410.5580.4870.4260.3750.3300.2920.2590.230
Resistance (kΩ)133.043100.75677.07659.54046.40136.48228.90423.04718.50914.97412.1899.9788.2156.8005.6544.7253.9673.3442.8292.4042.0501.7591.5151.3091.1350.9880.8620.7550.6620.5830.5150.4570.4060.361
NCPppXH682
Resistance (kΩ)234.787168.515122.42289.95366.76650.06637.90628.96322.31317.33813.57110.7058.5036.8005.4744.4343.6132.9612.4402.0221.6831.4091.1851.0010.8490.7240.6200.5320.4590.3980.3460.3020.2640.232
NCPppXW682
Resistance (kΩ)195.652148.171113.34787.55968.23753.65042.50633.89227.21922.02117.92614.67412.08110.0008.3156.9485.8344.9174.1613.5353.0142.5862.2281.9251.6691.4521.2681.1100.9740.8580.7580.6720.5960.531
NCPppXH103
Resistance (kΩ)3500K 3380K 3950K 3380K4.7kΩ
NCPppXW472
162.279116.47484.61562.17346.14734.60426.20020.01815.42311.9849.3807.3995.8774.7003.7833.0642.4972.0461.6861.3971.1640.9740.8190.6920.5870.5000.4280.3680.3180.2750.2390.2080.1820.160
Resistance (kΩ)3950K4.7kΩ 6.8kΩ 6.8kΩ 10kΩ
197.390149.390114.34088.38168.91554.16642.88934.19627.44522.16518.01014.72012.09910.0008.3096.9395.8244.9114.1603.5393.0242.5932.2331.9291.6731.4551.2701.1120.9760.8600.7590.6730.5980.532
NCPppXH103D
Resistance (kΩ)3380K
10kΩ±0.5%
NCPppXW223
759.605545.196396.070291.025216.008161.977122.63893.70272.19156.09343.90734.63327.50922.00017.70914.34411.6889.5787.8946.5405.4464.5593.8323.2392.7482.3422.0041.7221.4861.2871.1190.9750.8540.750
Resistance (kΩ)1073.436753.900535.073383.590277.643202.813149.462111.08283.23362.85847.83136.66428.30422.00017.21413.55710.7448.5666.8715.5444.4983.6693.0092.4792.0521.7071.4261.1961.0080.8520.7240.6170.5280.454
NCPppWL223
Resistance (kΩ)1227.263874.449630.851460.457339.797253.363190.766144.964111.08785.84266.86152.47041.47133.00026.43021.29817.26614.07611.5389.5067.8706.5495.4754.5953.8743.2822.7892.3792.0381.7511.5091.3061.1340.987
NCPppWB333
Resistance (kΩ)1451.0491019.238725.084522.021379.842279.371207.566155.639117.81489.92569.20453.67541.93733.00026.14320.84516.72313.49810.9548.9407.3346.0465.0114.1703.4872.9282.4692.0911.7771.5161.2981.1160.9620.832
NCPppWF333
Resistance (kΩ)3950K 4485K 4050K 4250K22kΩ 22kΩ 33kΩ 33kΩ
430.434325.976249.364192.629150.121118.02993.51474.56359.88148.44639.43632.28226.57722.00018.29215.28512.83410.8179.1547.7776.6315.6904.9014.2343.6713.1952.7902.4412.1421.8881.6681.4771.3121.169
NCPppXH223
Resistance (kΩ)3380K22kΩ
517.912371.724270.048198.426147.278110.43983.61763.88849.22138.24529.93623.61318.75615.00012.0749.7807.9696.5315.3824.4593.7133.1082.6132.2081.8731.5971.3671.1741.0130.8780.7630.6650.5820.511
NCPppXW153
Resistance (kΩ)3950K15kΩ
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Continued from the preceding page.
Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125
Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125
1610.1541130.850802.609575.385416.464304.219224.193166.623124.85094.28771.74754.99642.45533.00025.82220.33516.11512.84910.3068.3176.7485.5044.5133.7183.0782.5602.1391.7941.5111.2781.0850.9250.7920.681
NCPppWL333
Resistance (kΩ)1747.9201245.428898.485655.802483.954360.850271.697206.463158.214122.25995.22774.73059.06547.00037.64330.33424.59120.04816.43313.53911.2099.3287.7986.5445.5184.6743.9723.3882.9022.4942.1501.8601.6151.406
NCPppWB473
Resistance (kΩ)4485K 4050K33kΩ 47kΩ
Temp. (°C)B-ConstantResistance
Part Number
Temp. (°C)B-ConstantResistance
Part Number NCPppWF104
4397.1193088.5992197.2251581.8811151.037846.579628.988471.632357.012272.500209.710162.651127.080100.00079.22263.16750.67740.90433.19527.09122.22418.32315.18412.63510.5668.8737.4816.3375.3844.5943.9343.3802.9162.522
Resistance (kΩ)4250K100kΩ
NCP15WF104D
4221.2832995.0442146.9961554.5991136.690839.019624.987469.678355.975272.011209.489162.559127.057100.00079.22263.16750.67740.90433.19527.09122.22418.32315.18412.63510.5668.8737.4816.3375.3844.5943.9343.3802.9162.522
Resistance (kΩ)4250K
100kΩ±0.5%
Continued on the following page.
1743.0851241.814896.201654.460483.172360.367271.363206.204158.051122.14595.14574.67659.03847.00037.66730.38124.65420.12416.51813.63111.3069.4247.8926.6395.6094.7594.0543.4682.9772.5662.2201.9271.6791.468
NCP18WB473D
Resistance (kΩ)4030K47kΩ
1690.5861215.318882.908647.911480.069359.009270.868206.113158.126122.26795.25674.75459.07547.00037.63630.32624.58320.04316.43313.54511.2239.3457.8186.5715.5484.7044.0043.4222.9362.5282.1841.8931.6461.436
NCP15WB473D
Resistance (kΩ)4050K47kΩ
2990.0412100.2471494.1131075.679782.705575.674427.712320.710242.768185.300142.603110.60286.41568.00053.87142.95434.46027.81422.57218.42215.11312.45910.3258.5927.1856.0335.0874.3093.6613.1242.6752.2991.9831.715
NCPppWF683
Resistance (kΩ)3317.8932330.2371653.8621185.641858.168626.875461.974343.345257.266194.287147.841113.32587.48468.00053.20841.90333.20826.47721.23717.13713.90411.3429.2997.6626.3435.2764.4073.6973.1142.6342.2361.9071.6321.403
NCPppWL683
Resistance (kΩ)4250K 4485K68kΩ 68kΩ
2735.3591937.3911389.3451008.014738.978547.456409.600309.217235.606180.980140.139109.34485.92968.00054.16743.42135.01628.40623.16618.99715.65712.96710.7949.0217.5756.3875.4074.5983.9223.3592.8872.4892.1551.870
NCPppWD683
Resistance (kΩ)4150K68kΩ
2293.2491610.6051143.110819.487593.146433.281319.305237.312177.816134.287102.18478.32760.46747.00036.77628.96222.95218.30114.67911.8459.6107.8396.4275.2964.3843.6463.0462.5552.1521.8201.5461.3181.1280.970
NCPppWL473
Resistance (kΩ)4485K47kΩ
NCP18WF104D/F
4205.6862966.4362118.7891531.3191118.422825.570615.526463.104351.706269.305207.891161.722126.723100.00079.43963.50951.08441.33633.62827.51022.62118.69215.52512.94710.8499.1297.7136.5465.5724.7644.0873.5183.0402.634
Resistance (kΩ)4200K
100kΩ±1%
11585.8848016.9735623.9313990.1002861.7842076.1621520.9091125.049839.912632.521480.194367.455283.310220.000172.012135.364107.19885.41968.44155.15344.66536.37929.76324.46220.20516.76113.96211.6849.8098.2706.9985.9425.0674.334
NCPppWM224
Resistance (kΩ)4500K220kΩ
NCPppWL224
10734.3587539.0015350.7293835.8982776.4272028.1261494.6201110.822832.332628.577478.310366.639283.036220.000172.143135.569107.43685.66268.70855.44444.98436.69430.08524.78920.52317.06814.25811.96110.0758.5217.2366.1695.2814.540
Resistance (kΩ)4485K220kΩ
7318.8815140.2283648.2242615.3851893.0181382.8131019.059757.379567.499428.575326.121249.981192.979150.000117.37092.43373.25258.40646.84637.80330.67125.01820.51316.90213.99311.6389.7218.1556.8695.8104.9334.2063.6013.096
NCPppWL154
Resistance (kΩ)7899.4665466.1183834.4992720.5231951.2161415.5651036.984767.079572.667431.264327.405250.538193.166150.000117.28192.29373.09058.24046.66537.60530.45324.80420.29316.67913.77611.4289.5207.9666.6885.6394.7724.0523.4542.955
NCPppWM154
Resistance (kΩ)4485K 4500K150kΩ 150kΩ
4879.2543426.8182432.1491743.5901262.012921.875679.373504.919378.333285.717217.414166.654128.653100.00078.24761.62248.83538.93731.23125.20220.44816.67913.67511.2689.3297.7586.4815.4374.5803.8733.2892.8042.4002.064
NCPppWL104
Resistance (kΩ)4485K100kΩ
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Continued from the preceding page.
Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125
24751.66117127.16912014.7628524.3056113.8114435.4373249.2162403.5151794.3581351.2941025.870785.018605.252470.000367.480289.186229.014182.485146.215117.82895.42077.71863.58452.26043.16635.80829.82824.96120.95517.66814.95112.69510.8249.259
NCPppWM474
Resistance (kΩ)4500K470kΩ
Temp. (°C)B-ConstantResistance
Part Number
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Temperature Sensor and Compensation Chip Type !Caution/Notice
c !Caution (Storage and Operating Conditions)This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics or cause failures and burn-out.1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)
2. Volatile or fl ammable gas3. Dusty conditions4. Under vacuum, or under high or low pressure5. Wet or humid locations6. Places with salt water, oils, chemical liquids or organic solvents7. Strong vibrations8. Other places where similar hazardous conditions exist
c !Caution (Others)
c Notice (Storage and Operating Conditions)
c Notice (Rating)Use this product within the specifi ed temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.
c Notice (Handling)
Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product.
The ceramic of this product is fragile, and care mustbe taken not to load an excessive press-force or to cause a shock at handling. Such forces may cause cracking or chipping.
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
To keep the solderability of the product from degrading, the following storage conditions are recommended.1. Storage condition: Temperature -10 to +40°C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by fi rst-in and fi rst-out stocking system.3. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight.
Temperature Sensor and Compensation Chip Type !Caution/Notice
Locate this product horizontal to the direction in which stress acts.
Keep this product on the PC Board away from the Separation Line. Worst ← A-C-B-D → Better
Component Direction
Mounting Close to Board Separation Line
A
B
D
CPerforationHoles
Slit
1. Mounting Position
2. Allowable Soldering Temperature and Time
Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.
(a) Solder within the temperature and time combinations indicated by the slanted lines in the following graphs.
(b) Excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode.
(c) In case of repeated soldering, the accumulated soldering time should be within the range shown in the figure below. (For example, Reflow peak temperature: 260°C, twice -> The total accumulated soldering time at 260°C is within 30 seconds.)
Continued on the following page.
Allowable Reflow Soldering Temp. and Time
Allowable Reflow Soldering Temp. and Time
Time (sec.)
Tem
pera
ture
(°C
)
280
270
260
250
240
230
220
2100 10 20 30
Time (sec.)
Tem
pera
ture
(°C
)
280
270
260
250
240
230
220
2100 1109020 30 40 50 60 70 1008010
Time (sec.)
Tem
pera
ture
(°C
)280
270
260
250
240
230
2200 9020 30 40 50 60 70 8010
NCP03/15 Series
Allowable Flow Soldering Temp. and Time
NCP18/21 Series
c Notice (Soldering and Mounting)
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Temperature Sensor and Compensation Chip Type !Caution/Notice
For removing the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change of the external electrodes' quality.
occurrence of resonance in ultrasonic cleaning.
non-wash-type flux.
your reference, we use the solder paste below for any internal tests of this product.
We use the solder paste below for any internal tests of this product.
Use rosin type flux in the soldering process.
caused in the product characteristics and reliability.
(*Water-soluble flux can be defined as non-rosin type flux including wash-type flux and non-wash-type flux.)
NCP03/15 NCP18/21
Continued from the preceding page.
After cleaning, promptly dry this product.
room temp. or less than
r
room temp. or less than
r Frequency of several
Solvent
Dipping Cleaning
Ultrasonic Cleaning
(b) Rapid cooling by dipping in solvent or by other means is not recommended.
time should be within the range shown in the figure of
Reflow Soldering Conditions
Reflow Soldering Conditions
SolderingGradual Cooling
(in air)
±
SolderingGradual Cooling
(in air)
±
SolderingGradual Cooling
(in air)
±
NCP03/15 Series
Flow Soldering Conditions
NCP18/21 Series
Continued on the following page.
20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Temperature Sensor and Compensation Chip Type !Caution/Notice
o Thin or insufficient adhesive may result in loose component contact with land during flow soldering.
o Low viscosity adhesive causes chips to slip after mounting.
NCP03
NCP15
NCP18/NCP21
100μm
150μm
200μm
1/3EVTVE
1/3EVTVE
0.2mmVTVE
Part Number Solder Paste Thickness T
Reference: Optimum Solder Amount
TE
Electrode
Solder Solder
Continued from the preceding page.
o The amount of solder is critical. Standard height of fillet is shown in the table below.
o Too much solder may cause mechanical stress, resulting in cracking, mechanical and/or electronic damage.
7. Printing Conditions of Solder Paste
8. Adhesive Application and Curing
21
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Temperature Sensor and Compensation Chip Type Package
NCP03
NCP15
NCP18
NCP21
15,000
10,000
4,000
-
-
4,000
Part NumberPaper Tape
Quantity (pcs.)
Embossed Tape
(in mm)
(in mm)
40 min.190-250
Vacant Section
210-250
Top Tape aloneCover Tape alone
Leader Unit
Trailer Unit
Chip-mounting Unit
Direction of Feed
ø180
ø21.0±0.8
ø13.0±0.2
ø60
2.0±0.5
9.013.0±1.0
(1) A tape in a reel contains Leader unit and Trailer unit where
products are not packed. (Please refer to the figure at the
right.)
(2) The top and base tapes or plastic and cover tape are not
stuck at the first five pitches minimum.
(3) A label should be attached on the reel. (MURATA's part
number, inspection number and quantity should be marked
on the label.)
(4) Taping reels are packed in a package.
1. Dimensions of Reel
2. Taping Method
Tape Carrier Packaging
Minimum Quantity Guide
Continued on the following page.
W0Y1.5
W1.0Y0
W1.
0Y
0
22
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Temperature Sensor and Compensation Chip Type Package
(1) Other Conditions
(a) Packaging
Products are packaged in the cavity of the base tape and
sealed by a top tape and bottom tape.
(b) Tape
The top tape and bottom tape have no joints and products
are packaged and sealed in the cavity of the base tape,
continuously.
(2) Peeling Force of Top Tape
(3) Pull Strength
Pull strength of top tape is specified at 10N minimum.
Pull strength of bottom tape should be specified 5N minimum.
3. Paper Tape (NCP03/15/18 Series)
NCP15 Series
NCP18 Series
1.1 max.4.0±0.1 4.0±0.12.0±0.05
ø1.5+0.1/–0
1.75
±0.
1
3.5±
0.05
8.0±
0.3
Direction of Feed
1.05∗
0.8 max.4.0±0.12.0±0.05
ø1.5+0.1/–0 1.75
±0.
1
3.5±
0.05
1.15
∗
8.0±
0.3
Direction of Feed
0.65∗
(in mm)∗ Reference Value
∗ Reference Value
165-180° F
∗ 1 Peeling angle: 165 to 180° against the fixed surface of tape.
∗ 2 Peeling speed: 300mm/min.
∗ 3 Peeling force: 0.1 - 0.6N
Continued on the following page.
Continued from the preceding page.1.
85∗
∗ Reference Value
NCP03 Series
0.5 max.4.0±0.12.0±0.05
ø1.5+0.1/–0 1.75
±0.
1
3.5±
0.05
0.68
∗
8.0±
0.3
Direction of Feed
0.38∗
23
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Temperature Sensor and Compensation Chip Type Package
∗ 1 Peeling angle: 165 to 180° against the fixed surface of tape.
∗ 2 Peeling speed: 300mm/min.
∗ 3 Peeling force: 0.1 - 0.7N
F165-180°
Continued from the preceding page.
(2) Peeling Force of Cover Tape
(3) Tape Strength
Pull strength of Embossed tape and Cover tape should be
specified 10N minimum.
(1) Other Conditions
(a) Packaging
Products are packaged in the each cavity of Embossed
tape and sealed by Cover tape.
(b) Tape
Cover tape has no joints.
4. Embossed Tape (NCP21 Series)
1.050.2
4.0±0.12.0±0.05
4.0±0.1 ø1.5
1.75
±0.
1
ø1.0 1.45∗ ∗ Reference Value
3.5±
0.05
8.0±
0.3
Direction of Feed
2.25
∗
(in mm)
+0.3-0
+0.1-1
24
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
NTC ThermistorsTemperature Sensor Thermo String Type
This product is a small fl exible lead type NTC Thermistor with a small head and a thin lead wire.
c Features1. This small and highly accurate NTC Thermistor provides extremely precise temperature sensing.2. The small sensing head and thin lead wire deliver temperature sensing in a narrow space.3. Flexibility and a wide variety of lengths (25mm to 150mm) enable the design of fl exible temperature sensing architectures. 4. This product is compatible with our 0402 (EIA) size chip Thermistor.5. Excellent long-term stability6. This is a halogen free product. * * Cl= max.900ppm, Br=max.900ppm and Cl+Br=max.1500ppm7. NXFT series are recognized by UL/cUL. (UL1434, File No.E137188).
c Applications1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation in general use of electric circuits
1.2±0.4
25 to
100
±2
110
to 1
50±
3
3+2/
-1
1.2±0.4
ø0.30±0.05
The full length 25mm, 30 to 150mm interval 10mm. (in mm)
1.2±0.4
25 to
100
±2
110
to 1
50±
3
3+2/
-1
1.2±0.4
ø0.30±0.05
The full length 25mm, 30 to 150mm interval 10mm. (in mm)
p is fi lled with lead shape (1: twist, 2: without twist).
ppp is fi lled with Total-length codes. (25mm, 30 to 150mm interval 10mm, ex. 050=50mm)
Operating Current for Sensor rises Thermistor's temperature by 0.1°C
Rated Electric Power shows the required electric power that the thermistor's temperature rise to 30°C by self-heating, at ambient temperature of 25 °C.
Operating Temperature Range: -40°C to +125°C
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
5
NXFT15_1B Type (twist)
NXFT15_2B Type (without twist)
Part NumberResistance
(25°C)(ohm)
B-Constant(25-50°C)
(K)
B-Constant(25-80°C)
(Reference Value) (K)
B-Constant(25-85°C)
(Reference Value) (K)
B-Constant(25-100°C)
(Reference Value) (K)
Operating Currentfor Sensor (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
Thermal TimeConstant(25°C) (s)
NXFT15XH103FApBppp 10k ±1% 3380 ±1% 3428 3434 3455 0.12 7.5 1.5 4
NXFT15XV103FApBppp 10k ±1% 3936 ±1% 3971 3977 3988 0.12 7.5 1.5 4
NXFT15WB473FApBppp 47k ±1% 4050 ±1% 4101 4108 4131 0.06 7.5 1.5 4
NXFT15WF104FApBppp 100k ±1% 4250 ±1% 4303 4311 4334 0.04 7.5 1.5 4
Temperature Sensor Thermo String Type Specifi cations and Test Methods
Hold the lead wires as in Fig-3. Bend by 90 degrees and again bend back to the initial position. Then bend to the other side by 90 degrees and again bend back to the initial position. After bending process, 10N force for 3 seconds shall be applied to the lead wire.
Fig-3
10Lead WireBending Strength
· Lead wire does not break.
Continued on the following page.
The lead wire shall be inserted in a ø1.0mm hole until resin part contacts with a substrate as shown in fig.-2, and 1N force for 10 seconds shall be applied to the lead wire.
Fig-2
9Lead WirePull Strength
· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wires are dipped into 245±5°C solder <JIS Z 3282 SnAgCu> for 2±0.5 seconds according to Fig-1.
8 Solderability More than 90% of lead wire surface shall be covered by solder.
Both lead wires are dipped into 350±10°C solder for 3.5±0.5 seconds, or 260±5°C solder for 10±1 seconds according to Fig-1 (solder <JIS Z 3282 SnAgCu>).
Fig-1
7Resistance toSoldering Heat
· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
2mm length of coating resin from the top of Thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire.
6Insulation Break -down Voltage
· No damage electrical characteristics at DC100 V, 1 min.
85±2°C in air, with 'Operating Current for Sensor' for 1000 +48/-0 hrs.
5High TemperatureLoad
-40 +0/-3°C, 30 minutes in air+25±2°C, 10 to 15 minutes in air+125±2°C, 30 minutes in air +25 +2/-0°C, 10 to 15 minutes in air (1 cycle)Continuous 100 cycles, without loading.
4Temperature Cycle
60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading.
3HumidityStorage Test
· Resistance (R25°C) fluctuation rate: less than ±2%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
-40 +0/-3°C in air, for 1000 +48/-0 hours without loading.2Low TemperatureStorage Test
125±2°C in air, for 1000 +48/-0 hours without loading.1High TemperatureStorage Test · Resistance (R25°C) fluctuation rate: less than ±1%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
No. Test MethodsSpecificationsItem
* · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C. · After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).
Solder
1 to 2mm
1N (10 sec.)
10N (3 sec.)
26
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
5
Temperature Sensor Thermo String Type Specifi cations and Test Methods
Continued from the preceding page.
NTC Thermistor shall be fixed to the vibration test equipment. Vibration of total 1.5 mm amplitude, Frequency sequence of 10Hz - 55Hz - 10Hz in 1 minute shall be applied for right angled 3 directions for 2 hours duration each.
12 Vibration
NTC Thermistor shall be dropped without any force onto concrete floor from 1 meter height one time.
11 Free Fall
· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.· No visible damage at resin part.
* · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C. · After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).
No. Test MethodsSpecificationsItem
Mount
Solder is attached from the reverse side.
OscillatingDirection Z
Oscillating Direction X
OscillatingDirection Y
27
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
5
NTC ThermistorsTemperature Sensor Lead Type
(in mm)
10.0 to 40.0±1.0
4.0 max.
2.5±1
The full length 10.0 to 40.0mm interval 10.0mm
2.0 max.
ø0.40±0.05
This thermistor is for normal temperature level sensors having self-subsistence due to strong lead strength based on chip NTC.
c Features1. This highly accurate NTC Thermistor provides extremely precise temperature sensing.2. This product is compatible with 1005 (1.0mm x 0.5mm) size NTC Thermistor.3. The variation per hour of this product is highly stable.4. This product is produced with an automation line that was consistent from lead to packaging so that a product of uniform quality may be obtained at low cost in large quantities.5. Since this product has strong lead intensity with original lead mounting technique, it is bent at the time of use and can withstand processing, etc., readily. Taping package can be supported.
c Applications1. For temperature detection of a rechargeable battery pack2. For temperature detection of a charge circuit3. For temperature detection of a printer head4. For temperature detection of a DC fan motor5. For temperature detection of home electronics
Part NumberResistance
(25°C)(ohm)
B-Constant(25-50°C)
(K)
B-Constant(25-80°C)
(Reference Value) (K)
B-Constant(25-85°C)
(Reference Value) (K)
B-Constant(25-100°C)
(Reference Value) (K)
Operating Currentfor Sensor (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
Thermal TimeConstant(25°C) (s)
NXRT15XM202EA1Bppp 2k ±3% 3500 ±1% 3539 3545 3560 0.27 7.5 1.5 4
NXRT15XV502FA1Bppp 5k ±1% 3936 ±1% 3972 3977 3989 0.17 7.5 1.5 4
NXRT15XH103FA1Bppp 10k ±1% 3380 ±1% 3428 3434 3455 0.12 7.5 1.5 4
NXRT15XV103FA1Bppp 10k ±1% 3936 ±1% 3971 3977 3988 0.12 7.5 1.5 4
NXRT15WB333JA1Bppp 33k ±5% 4050 ±3% 4101 4108 4131 0.07 7.5 1.5 4
NXRT15WB473FA1Bppp 47k ±1% 4050 ±1% 4101 4108 4131 0.06 7.5 1.5 4
NXRT15WF104FA1Bppp 100k ±1% 4250 ±1% 4303 4311 4334 0.04 7.5 1.5 4
ppp is fi lled with Total-length codes. (10 to 40mm interval 10mm, ex. 040=40mm)
Operating Current for Sensor rises Thermistor's temperature by 0.1°C.
Rated Electric Power is necessary electric power that thermistor's temperature rises 5°C by self-heating at 25°C in still air.
Taping type of part numbers with "3A016" is available (Lead Spacing=5mm).
Operating Temperature Range: -40°C to +125°C
28
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
6
Temperature Sensor Lead Type Specifi cations and Test Methods
NTC thermistor shall be fixed to the vibration test Equipment. Vibration of total 1.5mm amplitude, Frequency sequence of 10Hz – 55Hz – 10Hz in 1 minute, shall be applied for right angled 3 directions for 2 hours duration each.
12 Vibration
NTC thermistor shall be dropped without any force onto concrete floor from 1 meter height one time.
11 Free Fall
· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.· No visible damage at resin part.
* · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C. · After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).
One lead wire is held and 2.5N force is applied. Then the body of NTC thermistor is bent by 90° and again bent back to the initial position. This sequence shall be completed twice. See Fig-3.
Fig-3
10Lead Wire Bending Strength
· Lead wire does not break.
One end of a lead wire shall be fixed and 2.5N force for 10 seconds shall be applied to the other lead wire as shown in Fig-2.
Fig-2
9Lead Wire Pull Strength
· Resistance(R25°C) fluctuation rate: less than ±1%.· B-Constant(B25/50°C) fluctuation rate: less than ±1%.· No visible damage at resin part.
Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wires are dipped into 245±5°C solder <Sn-3Ag-0.5Cu> for 2±0.5 seconds according to Fig-1.
8 Solderability· More than 90% of lead wire surface shall be covered by solder.
Both lead wires are dipped into 350±10°C solder for 3.5±0.5 seconds, or 260±5°C solder for 10±1 seconds according to Fig-1. (solder <Sn-3Ag-0.5Cu>)
Fig-1
7Resistance to Soldering Heat
· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
2mm length of coating resin from the top of thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire.
6Insulation Break - down Voltage
· No damage electrical characteristics on D.C.100 V, 1 min.
-40°C +0/-3°C, 30 minutes in air+25°C±2°C, 10 to 15 minutes in air+125°C +3/-0°C, 30 minutes in air+25°C +2/-0°C, 10 to 15 minutes in air (1 cycle)Continuous 100 cycles, without loading.
5Temperature Cycle
60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading.
4Humidity Storage Test
85±2°C in air, with ‘Operating Current for Sensor’ for 1000 +48/-0 hrs.
3High Temperature Load
· Resistance (R25°C) fluctuation rate: less than ±2%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
125±2°C in air, for 1000 +48/-0 hours without loading.2High Temperature Storage Test
-40 +0/-3°C in air, for 1000 +48/-0 hours without loading.1Low Temperature Storage Test · Resistance (R25°C) fluctuation rate: less than ±1%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
No. Test MethodsSpecificationsItem
Solder
2.5N (10sec.)
2.5N
90°
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
6
NTC ThermistorsTemperature Sensor Lead Insulation Type (Radial Type)
This thermistor is for normal temperature level sensors having self-subsistence due to strong lead strength based on chip NTC.
c Features1. NXR series can accurately detect temperature with NCP15 series on the head of parts. 2. The insulation coat with polyulethane on the surface of lead wire : 100VDC.3. You can choose NTC characteristics from NCP15 series.4. The resistance drift is low in the reliability test.5. The production capacity is bigger and NXR is produced almost entirely in an automation line. 6. Adopt to Sb regulation
c Applications1. Secondary battery2. Temperature detection for charging3. Temperature detection for DC fan motor4. Temperature sensing for appliance5. Self-standing temperature sensing for fi re detector
(in mm)
25.0
to 4
5.0±
1.0
(5.0
mm
)
4.0 max.
The full length 25.0 to 45.0mm interval 5.0mmA: Epoxy ResinB: Copper Lead Wire with Polyurethane Coat
2.5±1.0
0.46±0.05
2.0 max.
A
B
Part NumberResistance
(25°C)(ohm)
B-Constant(25-50°C)
(K)
B-Constant(25-80°C)
(Reference Value) (K)
B-Constant(25-85°C)
(Reference Value) (K)
B-Constant(25-100°C)
(Reference Value) (K)
Operating Currentfor Sensor (25°C)
(mA)
Rated ElectricPower (25°C)
(mW)
Typical DissipationConstant (25°C)
(mW/°C)
Thermal TimeConstant(25°C) (s)
NXRT15XM202EA5Bppp 2k ±3% 3500 ±1% 3539 3545 3560 0.36 13 2.6 4
NXRT15XV502FA5Bppp 5k ±1% 3936 ±1% 3972 3977 3989 0.22 13 2.6 4
NXRT15XH103FA5Bppp 10k ±1% 3380 ±1% 3428 3434 3455 0.16 13 2.6 4
NXRT15XV103FA5Bppp 10k ±1% 3936 ±1% 3971 3977 3988 0.16 13 2.6 4
NXRT15WB333JA5Bppp 33k ±5% 4050 ±3% 4101 4108 4131 0.08 13 2.6 4
NXRT15WB473FA5Bppp 47k ±1% 4050 ±1% 4101 4108 4131 0.07 13 2.6 4
NXRT15WF104FA5Bppp 100k ±1% 4250 ±1% 4303 4311 4334 0.05 13 2.6 4
ppp is fulled with Total-length codes. (25 to 45mm interval 5mm, ex. 040=40mm)
Operating Current for Sensor rises Thermistor's temperature by 0.1°C.
Rated Electric Power is necessary electric power that thermistor's temperature rises 5°C by self-heating at 25°C in still air.
Operating Temperature Range: -40°C to +125°C
30
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
7
Temperature Sensor Lead Insulation Type (Radial Type) Specifi cations and Test Methods
2mm length of coating resin from the top of thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire.
12Dielectric Breakdown Voltage
· No damage electrical characteristics on D.C.100V, 1 min.
-40°C +0/-3°C, 30 minutes in air+25°C±2°C, 10 to 15 minutes in air+125°C +3/-0°C, 30 minutes in air+25°C +2/-0°C, 10 to 15 minutes in air (1 cycle)Continuous 100 +4/-0 cycles, without loading.
11Change of Temperature
60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading.
10 Damp Heat
85±2°C in air, with ‘Operating Current for Sensor’ for 1000 +48/-0 hrs.
9High Temperature with Continuous Load
· Resistance (R25°C) fluctuation rate: less than ±2%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
125±2°C in air, for 1000 +48/-0 hours without loading.8 Dry Heat
-40 +0/-3°C in air, for 1000 +48/-0 hours without loading.7 Cold· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
NTC thermistor shall be fixed to the vibration test equipment. Vibration of total 1.5 mm amplitude, frequency sequence of 10Hz - 55Hz - 10Hz in 1 minute, shall be applied for right angled 3 directions for 2 hours duration each.
6 Vibration
NTC thermistor shall be dropped without any force onto concrete floor from 1 meter height one time.
5 Free Fall
· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.· No visible damage at resin part.
One lead wire is held and 2.5N force is applied. Then the body of NTC thermistor is bent by 90° and again bent back to the initial position. This sequence shall be completed twice. See Fig-3.
Fig-3
4Lead Wire Bending Strength
· Lead wire does not break.
One end of a lead wire shall be fixed and 2.5N force for 10 seconds shall be applied to the other lead wire as shown in Fig-2.
Fig-2
3Lead Wire Breaking Strength
· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wire are dipped into 245±5°C solder <SnAgCu> for 2±0.5 seconds according to Fig-1.
2Solderability (Flow)
· More than 90% of lead wsire surface shall be covered by solder.
Both lead wires are dipped into 350±10°C solder for 3.5±0.5 seconds, or 260 ±5°C solder for 10±1 seconds according to Fig-1. (solder <SnAgCu>)
Fig-1
1Resistance to Soldering Heat (Flow)
· Resistance (R25°C) fluctuation rate: less than ±1%.· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
No. Test MethodsSpecificationsItem
2.5N
90°
2.5N (10sec.)
Solder
1 to 2mm
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
7
Temperature Sensor Thermo String/Lead Type Temperature Characteristics (Center Value)
32
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125
44.98133.67125.44419.41714.95511.6199.0977.1785.7074.5683.6822.9862.4372.0001.6511.3701.1430.9580.8070.6820.5800.4950.4240.3650.3150.2730.2370.2070.1810.1600.1410.1240.1100.098
NXRT15XM202
Resistance (kΩ)Temp. (°C)B-ConstantResistance
Part Number
195.652148.171113.34787.55968.23753.65042.50633.89227.21922.02117.92614.67412.08110.0008.3156.9485.8344.9174.1613.5353.0142.5862.2281.9251.6691.4521.2681.1100.9740.8580.7580.6720.5960.531
NXRT15XH103
Resistance (kΩ)337.503243.332177.496130.85997.42873.23055.52942.46732.74725.45019.93215.72712.49810.0008.0546.5295.3244.3663.6012.9852.4882.0831.7521.4801.2561.0700.9160.7870.6790.5880.5120.4460.3910.343
NXRT15XV103
Resistance (kΩ)3500K 3380K 3936K2.0kΩ 10kΩ
168.752121.66688.74865.43048.71436.61527.76421.23316.37412.7259.9667.8646.2495.0004.0273.2642.6622.1831.8011.4931.2441.0410.8760.7400.6280.5350.4580.3940.3400.2940.2560.2230.1950.172
NXRT15XV502
Resistance (kΩ)3936K5.0kΩ 10kΩ
4397.1193088.5992197.2251581.8811151.037846.579628.988471.632357.012272.500209.710162.651127.080100.00079.22263.16750.67740.90433.19527.09122.22418.32315.18412.63510.5668.8737.4816.3375.3844.5943.9343.3802.9162.522
NXRT15WF104
Resistance (kΩ)4250K100kΩ
1227.263874.449630.851460.457339.797253.363190.766144.964111.08785.84266.86152.47041.47133.00026.43021.29817.26614.07611.5389.5067.8706.5495.4754.5953.8743.2822.7892.3792.0381.7511.5091.3061.1340.987
NXRT15WB333
Resistance (kΩ)4050K33kΩ
1747.9201245.428898.485655.802483.954360.850271.697206.463158.214122.25995.22774.73059.06547.00037.64330.33424.59120.04816.43313.53911.2099.3287.7986.5445.5184.6743.9723.3882.9022.4942.1501.8601.6151.406
NXRT15WB473
Resistance (kΩ)4050K47kΩ
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125
197.388149.395114.34588.38168.91554.16642.88934.19627.44522.16518.01014.72012.09910.0008.3096.9395.8244.9114.1603.5393.0242.5932.2331.9291.6731.4551.2701.1120.9760.8600.7590.6730.5980.532
NXFT15XH103
Resistance (kΩ)Temp. (°C)B-ConstantResistance
Part Number
4221.2802995.0402147.0001554.6001136.690839.019624.987469.678355.975272.011209.489162.559127.057100.00079.22263.16750.67740.90433.19527.09122.22418.32315.18412.63510.5668.8737.4816.3375.3844.5943.9343.3802.9162.522
NXFT15WF104
Resistance (kΩ)3380K 4250K10kΩ
337.503243.332177.496130.85997.42873.23055.52942.46732.74725.45019.93215.72712.49810.0008.0546.5295.3244.3663.6012.9852.4882.0831.7521.4801.2561.0700.9160.7870.6790.5880.5120.4460.3910.343
NXFT15XV103
Resistance (kΩ)3936K10kΩ 100kΩ
1690.5901215.320882.908647.911480.069359.009270.868206.113158.126122.26795.25674.75459.07547.00037.63630.32624.58320.04316.43313.54511.2239.3457.8186.5715.5484.7044.0043.4222.9362.5282.1841.8931.6461.436
NXFT15WB473
Resistance (kΩ)4050K47kΩ
Temperature Sensor Thermo String/Lead Type !Caution/Notice
c !Caution (Storage and Operating Conditions)This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics or cause failures and burn-out.1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)
2. Volatile or fl ammable gas3. Dusty conditions4. Under vacuum, or under high or low pressure5. Wet or humid locations6. Places with salt water, oils, chemical liquids or organic solvents7. Strong vibrations8. Other places where similar hazardous conditions exist
c !Caution (Others)
c Notice (Storage and Operating Conditions)
c Notice (Rating)Use this product within the specifi ed temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.
c Notice (Soldering and Mounting) NXF Series
Continued on the following page.
Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product.
To keep the solderability of the product from degrading, the following storage condition is recommended.1. Storage condition: Temperature -10 to +40°C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by fi rst-in and fi rst-out stocking system.
3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent.4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight.
Please note as shown below when you mount this product.1. Do not melt the solder in the resin head when you solder this product. If you do so, there is a possibility of wire breakage, electric short mode failure and wire coating breakage. If you cut the lead wire of this product less than 20mm from the resin head, the heat of the melted solder at the lead wire edge is propagated easily to the resin head along the lead wire.
2. Do not touch the resin head directly with the soldering iron. It may cause the melting of solder in the resin head.3. Do not separate the parallel lead wires 10mm or less from the resin.4. If you mold this product with resin, please evaluate the quality of this product before you use it.5. Do not bend the lead wire radius 1mm or more.
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Temperature Sensor Thermo String/Lead Type !Caution/Notice
Continued from the preceding page.
c Notice (Soldering and Mounting) NXR Series
c Notice (Soldering and Mounting) NXR Series (Insulation Type)
c Notice (Handling) NXF/NXR Series1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock at handling. Such forces may cause cracking or chipping.2. Do not apply excessive force to the lead. Otherwise, it may cause the junction between lead and element to break or crack. Holding the element by the side lead wire is recommended when lead wire is bent or cut.
c Notice (Handling) NXR Series (Insulation Type)1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock at handling. Such forces may cause cracking or chipping. Especially under high-temperature environment, there is a possibility that epoxy resin will become soft. When you set up the processing environment, please examine the processing method after evaluating the quality of this product.
2. Do not apply excessive force to the lead. Otherwise, it may cause the junction between lead and element to break or crack. Holding the element by the side lead wire is recommended when lead wire is bent or cut. Handle the lead with care; there is a possibility that a crack may go into the polyurethane insulated coat when bending the lead.
34
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Please note as shown below when you mount this product.1. Do not melt the solder in the resin head, when you solder this product. If you melt the solder in resin the head, the wire could break and short. If you cut the lead wire of this product less than 8mm from the resin head, the heat of the melted solder at the lead wire edge is propagated easily to the resin head along the lead wire. Please do not cut this product below 9mm.
2. Do not touch the resin head directly with the solder iron. It may cause the melting of solder in the resin head.3. If you mold this product with resin, please evaluate the quality of this product before you use it.
Please note as shown below when you mount this product.1. Do not melt the solder in the resin head when you solder this product. (more than 25mm in full length of the product). If you melt the solder in the resin head, it has posibility that the wire could break and short.2. Do not touch the resin head directly with the solder iron. It may cause the melting of solder in the resin head.3. When additonal processing is carried out on this product (such as bonding, resin molding, and resin coating, etc.), please perform an audit of quality level on an automated machine and only use the product after confi rming its reliability.
Please talk to us if you have concern matter, like process it under the high temperature and the high pressure. (For example, exposed to high-temperature and high-pressure environment as mold sealing with injection molding.)
Temperature Sensor Thermo String/Lead Type Package
Minimum Order Quantity
Part Number
Bulk
Minimum Quantity (pcs.)
-1,000
2,500500
Part Number
Ammo Pack Taping
Minimum Quantity (pcs.)
NXFT
NXRT
-
NXRT_3A016
P
L3
W3
W1
W0
W2
H0
H3
D
ød
ΔS T
Δh2Δh1
I
t1
P1
P2
F
øD0P0 t2
Item
Pitch of Component
Pitch of Sprocket Hole
Lead Spacing
Length from Hole Center to Component Center
Length from Hole Center to Lead
Body Diameter
Deviation Along Tape, Left or Right
Carrier Tape Width
Position of Sprocket Hole
Lead Distance between Reference and Bottom Planes
Height of Component
Protrusion Length
Diameter of Sprocket Hole
Lead Diameter
Total Tape Thickness
Total Thickness, Tape and Lead Wire
Deviation Across Tape
Portion to Cut in Case of Defect
Hold down Tape Width
Hold down Tape Position
Thickness
P
P0
F
P2
P1
D
S
W3
W1
H0
H3
l
øD0
ød
t1
t2
h1, h2
L3
W0
W2
T
12.7±1.0
12.7±0.3
5.0±1.0
6.35±1.3
3.85±0.7
4.0 max.
0±2.0
18.0±0.5
9.0±0.5
16.0±1.0
7.5±1.0
W0.5 to Y1.0
4.0±0.1
0.40±0.05
0.6±0.3
1.6 max.
1.0 max.
11.0
9.5 min.
1.5±1.5
2.0 max.
Dimensions (mm)Code
+0–2.0
c Taping Dimensions (NXRT_3A016 Series)
35
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
NTC ThermistorsInrush Current Suppression Lead Type
Coating Extensionon Lead : to line A
10.0
max
.3.
5±1.
0
NTPAN : 23.0 max.NTPAJ : 20.0 max. 5.5 max.
10.0±1.5
ø0.8±0.05Sn plated Cu wire
A
(in mm)
NTPAN/NTPAJ Series
Coating Extensionon Lead : to line A
10.0
max
.3.
5±1.
0
NTPAD : 16.0 max.NTPAA : 12.0 max.
5.5 max.5.0 max.
7.5±1.5
ø0.8±0.05Sn plated Cu wire
A
(in mm)
NTPAD/NTPAA Series
Coating Extensionon Lead: to line A
6.0
max
.3.
5±1.
0
NTPA9: 11.0 max.NTPA7: 9.0 max.NTPA6: 7.5 max.NTPA5: 6.0 max. 5.0 max.
5.0±1.5
ø0.6±0.05Sn plated Cu wire
A
(in mm)
NTPA7/NTPA9 Series
Part NumberResistance
(25°C)(ohm)
Permissible Max.Current (25°C)
(A)
Permissible Max.Current (55°C)
(A)
Thermal TimeConstant (25°C)
(s)
Thermal DissipationConstant (25°C)
(mW/°C)
NTPAN3R0LDKB0 3.0 ±15% 5.4 4.7 135 26.8
NTPAN4R0LDKB0 4.0 ±15% 4.7 4.1 130 26.8
NTPAN6R0LDKB0 6.0 ±15% 3.9 3.4 130 26.8
NTPAJ4R0LDKB0 4.0 ±15% 4.0 3.5 125 21.8
NTPAJ6R0LDKB0 6.0 ±15% 3.4 2.9 125 21.8
NTPAJ8R0LDKB0 8.0 ±15% 3.0 2.6 130 21.8
NTPAJ100LDKB0 10.0 ±15% 2.6 2.2 130 21.8
NTPAD3R9LDNB0 3.9 ±15% 3.3 2.9 65 18.2
NTPAD5R1LDNB0 5.1 ±15% 3.0 2.6 85 18.8
NTPAD8R0LDNB0 8.0 ±15% 2.7 2.3 65 18.7
NTPAD160LDNB0 16.0 ±15% 2.0 1.7 100 19.1
NTPAA2R2LDNB0 2.2 ±15% 3.7 3.2 70 13.5
Continued on the following page.
This product effectively supresses surge currents that are generated when switching power regulators are turned on.
c Features1. Lead is not contained in the ceramic element, the terminations, the solder for inner connection and the coating resin.2. Most suitable for power supplies of less than 100W3. Excellent recovery characteristics due to resin coating with excellent heat characteristics4. Highly reliable
c Applications1. Switching power supplies2. CRT monitors 3. Color televisions4. VCR power supplies 5. Other power circuits
36
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
Continued from the preceding page.
Part NumberResistance
(25°C)(ohm)
Permissible Max.Current (25°C)
(A)
Permissible Max.Current (55°C)
(A)
Thermal TimeConstant (25°C)
(s)
Thermal DissipationConstant (25°C)
(mW/°C)
NTPAA3R9LDNB0 3.9 ±15% 2.7 2.3 70 13.5
NTPAA5R1LDNB0 5.1 ±15% 2.5 2.2 70 13.5
NTPAA8R2LDNB0 8.2 ±15% 2.0 1.7 70 13.5
NTPAA100LDNB0 10.0 ±15% 1.7 1.5 70 13.5
NTPA94R0LBMB0 4.0 ±15% 2.5 2.2 65 11.6
NTPA95R0LBMB0 5.0 ±15% 2.3 2.0 65 11.6
NTPA98R0LBMB0 8.0 ±15% 1.8 1.6 65 11.6
NTPA9100LBMB0 10.0 ±15% 1.7 1.5 65 11.6
NTPA9160LBMB0 16.0 ±15% 1.4 1.2 65 11.6
NTPA74R0LBMB0 4.0 ±15% 2.3 2.0 40 9.4
NTPA75R0LBMB0 5.0 ±15% 1.9 1.6 40 9.4
NTPA78R0LBMB0 8.0 ±15% 1.7 1.5 40 9.5
NTPA7100LBMB0 10.0 ±15% 1.4 1.2 40 9.5
NTPA7160LBMB0 16.0 ±15% 1.2 1.0 40 9.9
NTPA7220LBMB0 22.0 ±15% 1.0 0.88 40 9.1
NTPA64R0LBMB0 4.0 ±15% 2.3 2.0 30 7.5
NTPA64R7LBMB0 4.7 ±15% 2.1 1.9 30 7.5
NTPA68R0LBMB0 8.0 ±15% 1.7 1.5 30 7.5
NTPA55R0LBMB0 5.0 ±15% 1.7 1.5 20 5.6
NTPA5100LBMB0 10.0 ±15% 1.2 1.1 20 5.6
NTPAD/NTPAA/NTPA9/NTPA7 series are also available on tape. The fi nal alphabet of the part number should be "DNB0=>D6A0", "BNB0 =>B1A0".
Operating Temperature Range: -20°C to +160°C
Part Number
Voltage (AC)
NTPAN 8600μF
NTPAJ 5000μF
NTPAD 2700μF
NTPAA 1400μF
NTPA9 800μF
NTPA74R0700μF
NTPA78R0
NTPA75R0
NTPA7100570μF
NTPA7160400μF
NTPA7220
5972μF
3472μF
1875μF
972μF
556μF
486μF
396μF
278μF
4936μF
2870μF
1550μF
803μF
459μF
402μF
327μF
230μF
1777μF
1033μF
558μF
289μF
165μF
145μF
118μF
83μF
1493μF
868μF
469μF
243μF
139μF
122μF
99μF
69μF
1234μF
717μF
387μF
201μF
115μF
NTPA68R0 560μF 389μF 321μF 116μF 97μF 80μF
NTPA5 346μF 240μF 198μF 71μF 60μF 50μF
100μF
82μF
57μF
NTPA64R0620μF
NTPA64R7431μF 356μF 128μF 108μF 89μF
100Vrms 120Vrms 132Vrms 220Vrms 240Vrms 264Vrms
c Permissible Electrolytic Capacitor
NTC
–t°
–
+
c Application Circuit
Max
. Cur
rent
Rat
io
1.0
0
0.5
Ambient Temperature (°C)20 40 60 80 100 120 140 160
c Determination of Allowable Current
37
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAN3R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAN4R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)c NTPAN6R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAJ4R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAJ6R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAJ8R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAJ100L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAD3R9L Type
Continued on the following page.
38
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
Continued from the preceding page.
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAD5R1L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAD8R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)c NTPAD160L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAA2R2L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAA3R9L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAA5R1L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPAA8R2L Type
0.01
0.1
1
10
0.01 0.1 1 10
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
tem
pera
ture
(°C
)
1
10
100
1000
Resistance RatioThermistor's Temperature
Ta=25°C
Current (A)
c NTPAA100L Type
Continued on the following page.
39
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
Continued from the preceding page.
0.01
0.1
1
10
0.01 0.1 1 10
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
tem
pera
ture
(°C
)
1
10
100
1000
Resistance RatioThermistor's Temperature
Ta=25°C
Current (A)
c NTPA9160L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA74R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA75R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA78R0L Type
Continued on the following page.
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA94R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA95R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)c NTPA98R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA9100L Type
40
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
Continued from the preceding page.
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA64R7L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA68R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA55R0L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA5100L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA7100L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA7160L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)c NTPA7220L Type
0.01 0.1
Current (A)
Ta=25°C
1 10
Resistance RatioThermistor's Temperature (°C)
10
1
0.1
0.01
1000
100
10
1
Res
ista
nce
Rat
io (
Rt/R
25)
The
rmis
tor's
Tem
pera
ture
(°C
)
c NTPA64R0L Type
41
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
Inrush Current Suppression Lead Type !Caution/Notice
c !Caution (Storage and Operating Conditions)
c !Caution (Others)
c Notice (Storage and Operating Conditions)
c Notice (Rating)Use this product within the specifi ed temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.
c Notice (Soldering and Mounting)
Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product.
To keep the solderability of the product from degrading, the following storage condition is recommended.1. Storage condition: Temperature -10 to +40°C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by fi rst-in and fi rst-out stocking system.
3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent.4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight.
1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down.2. Do not touch the body with the soldering iron. The soldering point should be min. 5mm away from the root of the lead wire.
42
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
1. This product is designed for Switching Power Supplies with smoothing capacitors. Other applications of this product may result in fi re.2. Use this product within the specifi ed maximum current. Otherwise it may catch fi re in the worst case.3. Use this product with smoothing capacitors within the specifi ed maximum capacitance value. Otherwise it may catch fi re in the worst case.4. This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure).
Do not use under the following conditions because all these factors can deteriorate the product characteristics cause failure and burn-out. (1) Corrosive gas or deoxidizing gas. (Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) Volatile or fl ammable gas (3) Dusty conditions (4) Under high or low pressure (5) Wet or humid conditions (6) Near with salt water, oils, chemical liquids or organic solvents (7) Strong vibrations (8) Other places where similar hazardous conditions exist.
Inrush Current Suppression Lead Type !Caution/Notice
c Notice (Handling)
c Notice (Others)1. This product may allow the passing of higher current than its initial value if it receives inrush current again before it cools down enough to recover its original resistance. Be sure to consider the highest current under actual operating conditions operating temperature.2. The resin coating of this product does not guarantee insulating. Keep an adequate insulating distance from surrounding parts.
43
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
1. When this product is operated, the temperature of some areas may be about 160°C. Use proper surrounding parts and material that withstand such temperature. If they are inadequate and kept at high temperature for a long time, they may be deteriorated or may produce harmful gas. Such harmful gas may deteriorate the element of this product.2. This product does not have waterproof construction. Splashed water may cause failure mode such as deterioration of characteristics or current leak. Therefore, do not apply clean by immersing it into water or any solvent.
3. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock at handling. Such forces may cause cracking or chipping to the element.4. Do not apply excessive force to the lead wire. Otherwise, it may cause the junction between lead wire and element to break or crack, or may crack the element. Therefore, fi x the lead wire of the element side when the lead wire is bent or cut.
Inrush Current Suppression Lead Type Package
Part Number
Bulk
Minimum Quantity (pcs.)
-50
-100
400150
750300
1,000300
1,000500
Part Number
Ammo Pack Taping
Minimum Quantity (pcs.)
NTPAN_DKB0
NTPAJ_DKB0
NTPAD_DNB0
NTPAA_DNB0
NTPA9_BMB0
NTPA7_BMB0
-
-
NTPAD_D6A0
NTPAA_D6A0
NTPA9_B1A0
NTPA7_B1A0
1,000500NTPA6_BMB0 NTPA6_B1A0
1,500500NTPA5_BMB0 NTPA5_B1A0
c Minimum Order Quantity
c Taping Dimensions (NTPAD/A_D6A0 Series)
Pitch of Component
Pitch of Sprocket Hole
Lead Spacing
Length from Hole Center to Lead
Length from Hole Center to Component Center
Body Diameter
Deviation Along Tape, Left or Right
Carrier Tape Width
Position of Sprocket Hole
Lead Distance between Reference and Bottom Plane
Height of Component
Protrusion Length
Diameter of Sprocket Hole
Lead Diameter
Total Tape Thickness
Total Thickness, Tape and Lead Wire
Deviation Across Tape
Portion to Cut in Case of Defect
Hold down Tape Width
Hold down Tape Position
Coating Extension on Lead
P
P0
F
P1
P2
D
ΔS
W
W1
H0
H2
I
D0
d
t1
t2
Δh1, Δh2
L
W0
W2
e
30.0
15.0±0.3
7.5±0.5
7.5±1.5
3.75±1.0
(refer to the table below)
Body Thickness T (refer to the table below)
±2.0
18.0±0.5
16.0±0.5
10.0 max.
W0.5 to Y6.0
4.0±0.1
0.8±0.05
0.6±0.3
2.0 max.
2.0 max.
11.5 min.
4.0 max.
to line A
CodeItem Dimensions (mm)
9.0±0.5
11.0+0–2.0
NTPAD
NTPAA
Type D (mm) T (mm)
16.0 max. 5.5 max.
12.0 max. 5.0 max.
W0
W2
W
W1
H0
H2
Δh2Δh1
e
ΔSP2 P
D
P1
P0
F d
l
øD0
L
t2 t1
T
A
Continued on the following page.
44
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
Inrush Current Suppression Lead Type Package
Continued from the preceding page.
c Taping Dimensions (NTPA9/7/6/5_B1A0 Series)
Pitch of Component
Pitch of Sprocket Hole
Lead Spacing
Length from Hole Center to Lead
Length from Hole Center to Component Center
Body Diameter
Deviation Along Tape, Left or Right
Carrier Tape Width
Position of Sprocket Hole
Lead Distance between Reference and Bottom Planes
Height of Component
Protrusion Length
Diameter of Sprocket Hole
Lead Diameter
Total Tape Thickness
Total Thickness, Tape and Lead Wire
Deviation Across Tape
Portion to Cut in Case of Defect
Hold down Tape Width
Hold down Tape Position
Coating Extension on Lead
P
P0
F
P1
P2
D
ΔS
W
W1
H0
H2
I
D0
d
t1
t2
Δh1, Δh2
L
W0
W2
e
12.7
12.7±0.3
5.0
6.35±1.3
3.85±0.8
(refer to the table below)
Body Thickness T 5.0 max.
±1.5
18.0±0.5
16.0±1.0
6.0 max.
W0.5 to Y4.0
4.0±0.3
0.6±0.05
0.6±0.3
2.0 max.
1.5 max.
11.0 min.
4.0 max.
to line A
CodeItem Dimensions (mm)
9.0
11.0+0–2.0
+0.8–0.3
+0.5–0.75
W0
W2
W
W1
H0
H2
Δh2Δh1
e
ΔSP2 P
D
A
P1
P0
F d
l
øD0
L
t2 t1
T
Type D (mm)
11.0 max.
9.0 max.
7.5 max.
6.0 max.
NTPA9
NTPA7
NTPA6
NTPA5
45
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
Murata Manufacturing Co., Ltd.
www.murata.com
Note1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specifi ed by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1 Aircraft equipment
2 Aerospace equipment
3 Undersea equipment
4 Power plant equipment
5 Medical equipment
6 Transportation equipment (vehicles, trains,
ships, etc.)
7 Traffi c signal equipment
8 Disaster prevention / crime prevention
equipment
9 Data-processing equipment
10 Application of similar complexity and/or
reliability requirements to the applications
listed above
3 Product specifi cations in this catalog are as of
December 2014. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifi cations.
Therefore, please approve our product
specifi cations or transact the approval sheet
for product specifi cations before ordering.
6 Please note that unless otherwise specifi ed, we
shall assume no responsibility whatsoever for any
confl ict or dispute that may occur in connection
with the eff ect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the eff ect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Global LocationsFor details please visit www.murata.com
Cat. No. R44E-16