One Source... Diversified Solutions.
STALL LINE PULL
• 200,000 bs (90.7MT) at the 1st layer
CAPACITY
• 2.0-in (50mm) rope: 2,400 ft (732m)• 1.75-in (44mm) rope: 3,300 ft (1,000m)
ENGINE & TRANSMISSION
• 200-HP (150KW) diesel engine• Complete with 3-speeds• Forward and reverse• Power shift transmission• Optional hydraulic transmission
or electric drive
DRUM SIZE
• 24-in (610mm) barrel diameter• 66-in (1,676mm) flange diameter• 42-in (1,059mm) between flanges
DRUM CLUTCH
• Jaw clutch on drum pinions• Air-operated with manual lever for
maintenance• Optional friction clutch on drum pinions
DRUM BAND BRAKE
• 250,000 lbs (113MT) static 1st layer holdingcapacity
• Air set and release with manual hand- wheel supplement• Optional spring set / air release
DRUM PAWL
• 300,000 lbs (136MT) holding• Air-operated
CATHEAD
• 18-in (464mm) diameter• One or two catheads (optional)
LEVEL WIND
• Diamond screw• Optional hydraulic drive• Bolt-on design - either port or starboard (can be
field added)
WEIGHT & DIMENSIONS
• 54,000 lbs (24.5MT) (with engine)• Length X Height X Width (varies with options)
166-in 81-in 196-in(4,211mm) (2,059mm) (4,981mm)
SMATCO® Towing Winch
Oil States Skagit SMATCO
SMATCO® WINCH TECHNOLOGY
Model 56-DPDT-200K
New Design... Same Reliability!
Double Drum Side-by-Side Configuration
SMATCO Winch 56 DPDT.indd 1 4/28/10 3:17 PM
www.oilstates.com
O I L S TAT E S I N D U S T R I E S , I N C .
©2010 Oil States Industries, Inc.02-SS-SM SS0410 .3m
WINCH HAULSingle Drum Line Pull
* The unit can be operated with two drums simultaneously at the above speeds at one-half of the rated pull shown.
SMATCO® Towing WinchModel 56-DPDT-200K
OIL STATES SKAGIT SMATCOMANUFACTURING, SALES & SERVICE1180 Mulberry RoadHouma, Louisiana 70363 USATEL: (985) 868 0630 FAX: (985) 868 9733Email: [email protected]
SALES OFFICE1155 Dairy Ashford, Ste. 700Houston, Texas 77079 USATEL: (713) 510 2200 FAX: (713) 510 2307Email: [email protected]
18-in464mm
24-in(610mm)
81-in(2,059mm)
166-in (4,211mm)
42.7-in(1,083mm)
49-in(1,245mm)
27.3-in(693mm)DRUM FLANGE
66-in (1,676mm)
35-in(898mm)
76.7-in(1,949mm)
DRUM WIDTH42-in (1,059mm) 72.5-in
(1,842mm)
DRUM WIDTH42-in (1,059mm)
156-in (3,969mm)
196-in (4,981mm)
BARE DRUM
MID DRUM
FULL DRUM
LOW SPEED MID RANGE HIGH SPEED STALLPULL�
KIPS (MT)SPEED
FPM (MPM)PULL
KIPS (MT)SPEED
FPM (MPM)PULL
KIPS (MT)SPEED
FPM (MPM)PULL
KIPS (MT)
(11.3)
(6.8)
(4.5)
LAYER
25
15
10
150
93
63
(68)
(42)
(28)
(9.1)
(14.6)
(21.9)
30
48
72
(29)
(17.7)
(12.2)
64
39
27
(21.3)
(28.5)
(51.2)
70
93
168
(53.6)
(86.9)
(128)
176
285
420
(90.7)
(54.4)
(36.7)
200
120
81
SMATCO Winch 56 DPDT.indd 2 4/28/10 3:17 PM
