www.AFLtele.com / 1.800.235.3423 Specifications are subject to change without notice. © 2004, AFL Telecommunications. All rights reserved.
table of contents
1
Optical Connectivity
3Q04
Cable Assemblies
Simplex Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Duplex Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Quad Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MTP® Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connectorized Jacketed Ribbon Assemblies. . . . . . . . . . . . . . . . 11
Circular Premise Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . 12
Preterminated Indoor / Outdoor Cable Assemblies . . . . . . . . . . . 13
LightLink™ Fiber Receiver Service Cable . . . . . . . . . . . . . . . . . . 15
Advanced Fiber Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Lensed Fiber Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Hermetic Fiber Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Polarization Maintaining (PM) Assemblies . . . . . . . . . . . . . . . . . 21
Fiber Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Components and Accessories
ST and SC Field Master™ Connectors . . . . . . . . . . . . . . . . . . . . 24
Loopback Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Plastic Optical Fiber Data Link System. . . . . . . . . . . . . . . . . . . . 26
Precision Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
SC Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
SC Adapter Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
LC Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
MTP® Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Hybrid Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
FC Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ST Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
MT-RJ Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Buildout-Style Attenuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Attenuated Jumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
SC and FC Optical Terminators . . . . . . . . . . . . . . . . . . . . . . . . . 33
Field Master™ Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Loose Tube Fanout Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Adapter Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Cletop Ferrule Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Connector/Adapter Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . 37
Wideband Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Tap Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Wavelength Division Multiplexer Couplers . . . . . . . . . . . . . . . . . 41
Optical Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Ruggedized Wideband Couplers . . . . . . . . . . . . . . . . . . . . . . . . 43
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
4
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
8.31.04
optical connectivity
SC Cable Assemblies
SC cable assemblies are designed for the most advanced fiber optic systems providing exceptional stability and low reflection (single-mode). SC cable assemblies are well suited for high-density applications. The SC connector uses a rectangular, molded design for quick, easy push-pull installation. This design prevents ferrule rotation and axial damage on the fiber contact points, reducing the potential for damage from mechanical vibration.
features• Meets or exceeds Bellcore 326
requirements
• Ceramic ferrule for durability
• 8° Angled PC polish for single-mode
ST Cable Assemblies
The ST connector’s nonslip housing makes installation quick and easy. The bayonet style coupling uses a convenient push-twist-and-lock method for easy mounting and is keyed to ensure easy alignment. The ST connector provides durable, quick, economical and reliable terminations.
features• Metallic housing for both single-mode
and multimode
• Single twist bayonet coupling
Simplex Cable Assemblies
specifications
Single-mode
Parameter Value
Insertion Loss < 0.20dB
Return Loss > -55dB
Operating Temperature -40°C to +85°C
specifications
Single-mode
Parameter Value
Insertion Loss < 0.20dB
Return Loss > -55dB
Operating Temperature -40°C to +85°C
Multimode
Parameter Value
Insertion Loss < 0.50dB
Return Loss > -30dB
Operating Temperature -40°C to +85°C
• Ceramic ferrule
• Black boot for multimode; blue boot for single-mode
• 2.5mm ferrule, pull-proof design
• Available as a duplex connector, compliant to requirements of TIA/EIA and fibre channel standards
Multimode
Parameter Value
Insertion Loss < 0.50dB
Return Loss > -30dB
Operating Temperature -40°C to +85°C
5
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
8.31.04
optical connectivity
features
• Standard and custom configurations• Ultra PC polish for single-mode
Simplex Cable Assemblies
LC Cable Assemblies - Simplex
The LC connector reduces system cost by doubling the fiber density in shelves and outlets without sacrificing performance. Assemblies are manufactured and factory tested to provide the high performance link needed in today’s high speed telephony, data, and broadband networks. Available in both single-mode (blue housing) and multimode (beige housing) versions.
FC Cable Assemblies
The FC connector’s cylindrical nonslip surface allows for fast and easy installation while the keyed, threaded metallic coupling provides durable, reliable connections. A spring loaded, pull-proof zirconia ferrule optimizes performance and prevents rotational damage during mating and disconnections. Standard boot colors are green (angled single-mode), blue (single-mode), and black (multimode).
features• Designed to meet Bellcore / Telcordia’s
362 Generic Requirements
• Rugged, metallic housing
specifications
Single-mode
Parameter Value
Insertion Loss < 0.20dB
Return Loss > -55dB
Operating Temperature -40°C to +85°C
Multimode
Parameter Value
Insertion Loss < 0.50dB
Return Loss > -30dB
Operating Temperature -40°C to +85°C
• Ultra Polish for single-mode
• Angle polish for single-mode
specifications
Single-mode
Parameter Value
Insertion Loss < 0.20dB
Return Loss > -55dB
Operating Temperature -40°C to +85°C
Multimode
Parameter Value
Insertion Loss < 0.50dB
Return Loss > -30dB
Operating Temperature -40°C to +85°C
• Pull-proof design• Unique latching mechanism
6
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
8.31.04
optical connectivity
ordering information
Connector End A
Single-mode
ASC = Angle SC
AFC = Angle FC
USC = Ultra SC
UFC = Ultra FC
UST = Ultra ST
ULC = Ultra LC
UMA = Ultra MU
UMJ = Ultra MU-J
Multimode
PSC = SC MM
PFC = FC MM
PLC = LC MM
PST = ST MM
Cable Type
RS = 3.0mm Riser
PS = 3.0mm PLenum
RM = 1.6m Riser
PM = 1.6mm Plenum
RT = 2.0mm Riser
PT = 2.0mm Plenum
JH = 900µm
Fiber Count
1 = 001
Fiber Type
Q = Single-mode
R = Multimode 50/125
2 = Multimode 62.5/125
9 = 10 Gigabit MM 50µm
Cable Length (meters)
0010 = 10 meters
(specify length)
Connector End B
Single-mode
ASC = Angle SC
AFC = Angle FC
USC = Ultra SC
UFC = Ultra FC
UST = Ultra ST
ULC = Ultra LC
UMA = Ultra MU
UMJ = Ultra MU-J
XXX = No connector
Multimode
PSC = SC MM
PFC = FC MM
PLC = LC MM
PST = ST MM
XXX = No connector
Simplex Cable Assemblies
specifications
Parameter Value
Insertion Loss < 0.25dB
Return Loss > -55dB
Operating Temperature -40°C to +85°C
applications• Panel-Mount
• Board-Mount
• Amplifiers
• OADMs
• Optical Switches
• High Density Interconnect
• OEM Applications
MU Cable Assemblies - Simplex
MU assemblies are very useful in many high-density applications. While the MU connector is 50% smaller than the SC connector, it maintains high optical performance. The MU’s latchless design makes it the choice for backplane applications where blind-mating/demating is required. In backplane applications where little demating is required and high-density is the priority, MU-J is a useful alternative to the MU-A.
7
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
8.31.04
optical connectivity
Duplex Cable Assemblies
Zipcord Assemblies
The zipcord tight-buffered cordage contains two tubes of single-mode fiber which are tight buffered with a 900µm jacket. This construction is zipped apart to the desired length. These are connectorized on the 3mm, 2.0mm or 1.6mm assembly. If an application requires 900µm, refer to the dual-link assemblies. Connectors can be duplexed with clips.
Dual-Link Cable Assemblies
Dual-link connectorized assemblies consist of 2.85mm riser outer jacket with two PVC 900µm coated fibers, connectorized on the 900µm legs. Standard length of this break-out is 1/2 meter. If an application requires 3.0mm furcation, use of a zipcord assemby is recommended.
MT-RJ Assemblies
MT-RJ assemblies are ideally suited for high-density applications, doubling the fiber count in shelves and outlets. The MT-RJ is very cost effective allowing the number of ports to be doubled without doubling the cost of the electronics. The compact two fiber connector features a snag-proof latching mechanism for worry free installation.
specifications
MT-RJ Single-mode Multimode
Return Loss < -35dB -20dB
Insertion Loss < 0.50dB < 0.50dB
features• Two-fiber, dual connect, single ferrule
design
• Multimode and single-mode performance to TIA specifications
• RJ-style snag-free latch
8
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
8.31.04
optical connectivity
Duplex Cable Assemblies
ordering information
Connector End A
Single-mode
ASC = Angle SC
AFC = Angle FC
USC = Ultra SC
UFC = Ultra FC
UST = Ultra ST
ULC = Ultra LC
USF = Ultra SC Duplex
UDL = Ultra LC Duplex
SJF = MT-RJ Female
SJM = MT-RJ Male
Multimode
PSC = SC MM
PFC = FC MM
PLC = LC MM
PST = ST MM
PSF = SC Duplex MM
PDL = LC Duplex MM
PJF = MT-RJ Female MM
PJM = MT-RJ Male MM
* single connector options, quantity two per end
Cable Type
RZ = 3.0mm Riser Zipcord
PZ = 3.0mm Plenum Zipcord
R20Z = 2.0mm Riser Zipcord
P20Z = 2.0mm Plenum Zipcord
R16Z = 1.6mm Riser Zipcord
P16Z = 1.6mm Plenum Zipcord
RD = Riser Dual Link
PD = PLenum Dual Link
R7 = Riser Ribbon (for MT-RJ only)
P7 = Plenum Ribbon (for MT-RJ only)
Fiber Count
2 = 002
Fiber Type
Q = Single-mode
R = Multimode 50/125
2 = Multimode 62.5/125
Cable Length (meters)
XXXX (specify length)
10 meters = 0010
Clip Type
HLA = High Metal, Low Profile
HHA = High Metal, High Profile
LLA = Low Metal, Low Profile
LHA = Low Metal, High Profile
(Only Applies To Duplex SCs)
Connector End B
Single-mode
ASC = Angle SC
AFC = Angle FC
USC = Ultra SC
UFC = Ultra FC
UST = Ultra ST
ULC = Ultra LC
USF = Ultra SC Duplex
UDL = Ultra LC Duplex
SJF = MT-RJ Female
SJM = MT-RJ Male
XXX = No connector
Multimode
PSC = SC MM
PFC = FC MM
PLC = LC MM
PST = ST MM
PSF = SC Duplex MM
PDL = LC Duplex MM
PJF = MT-RJ Female MM
PJM = MT-RJ Male MM
XXX = No connector
optical connectivity
9
www.AFLtele.com or 1.800.235.3423 Specifi cations are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
8.31.04
specifications
Parameter Value
Upjacketing or Furcation Length 500mm +/- 30mm; Diameter 2.4mm, 1.6mm for LC Hybrids
900µm standard leg color codes 1 = Blue2 = Orange3 = Green4 = Brown
applications• Loaded Panels
• Communications Closets
• Routing between Communications Closets and Equipment Rooms
• FDF to FOT
Quad Assemblies
AFL Telecommunications offers a wide variety of confi gurations for Quad fi ber assemblies. The following tables highlight a number of standard confi gurations. Custom assemblies are available to fi t exact application needs. Quad assemblies are offered using four 900µm coated fi bers in one riser-rated circular cable featuring a 4.9mm outer diameter.
Connector End A
Single-mode
ASC=Angle SC
AFC=Angle FC
USC=Ultra SC
UFC=Ultra FC
UST=Ultra ST
ULC=Ultra LC
USF=Ultra SC Duplex
UDL=Ultra LC Duplex
SJF=MT-RJ Female
SJM=MT-RJ Male
Multimode
PSC=SC MM
PFC=FC MM
PLC=LC MM
PST=ST MM
PSF=SC Duplex MM
PDL=LC Duplex MM
PJF=MT-RJ Female MM
PJM=MT-RJ Male MM
Cable Type
RQ=Quad Riser
PQ=Quad Plenum
Fiber Count
4=004
Fiber Type
Q=Single-mode
R=Multimode 50/125
2=Multimode 62.5/125
Cable Length (meters)
XXXX (specify length)
10 meters=0010
Clip Type
HLA=High Metal, Low Profi le
HHA=High Metal, High Profi le
LLA=Low Metal, Low Profi le
LHA=Low Metal, High Profi le
(Only Applies To Duplex SCs)
ordering information
Connector End B
Single-mode
ASC=Angle SC
AFC=Angle FC
USC=Ultra SC
UFC=Ultra FC
UST=Ultra ST
ULC=Ultra LC
USF=Ultra SC Duplex
UDL=Ultra LC Duplex
SJF=MT-RJ Female
SJM=MT-RJ Male
XX= No connector
Multimode
PSC=SC MM
PFC=FC MM
PLC=LC MM
PST=ST MM
PSF=SC Duplex MM
PDL=LC Duplex MM
PJF=MT-RJ Female MM
PJM=MT-RJ Male MM
XX= No connector
10
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
10.14.03
optical connectivity
MTP® Cable Assemblies
AFL Telecommunications offers a variety of MTP® cable assemblies designed for high- density and multi-fiber interconnect applications. MTP® terminations are most commonly used in fiber rich environments, where space is a premium. MTP® cable assemblies provide a reliable interface for 8 and 12 fiber terminations. Assemblies include Patchcords, Pigtails and Modules. Custom assemblies are available on request.
features• Connectorized interface for ribbon/
ribbonized fiber
• 8 and 12 fiber connector terminations and assemblies
• Push-pull connector mating assures secure connections
Specification Multimode Single-mode
Insertion Loss Max Typical
.75dB
.35dB.75dB.35dB
Return Loss Not applicable -55dB
Operating Temp -40°C to +75°C -40°C to +75°C
Durability <0.3dB200 Insertions
<0.3dB200 Insertions
StandardsCompliant
IEC 1754-7TIA/EIA 604-5ANSI HIPPI 6400
IEC 1754-7TIA/EIA 604-5ANSI HIPPI 6400Telcordia - 1435
specifications
applications• High Density Fiber Management
• DACS
• LAN/WAN Premises
• DWDM & Switching (Network Elements)
• Back Plane
• Precision Guide Pin assures fiber alignment at mating
• Meets/exceeds Bellcore GR-1435 requirements
• Most economical solution for mass-termination of fiber
• Fully intermatable for MTP application
Connector End A
Single-mode
ATM = Angle Male MTP
ATF = Angle Female MTP
Multimode
FTM = Male MTP
FTF = Female MYP
Cable Type
RR = Riser Jacketed Ribbon
PR = Plenum Jacketed Ribbon
CR = Bare Ribbon
Fiber Count
8=008
12=012
Fiber Type
Q=Single-mode
R=Multimode 50/125
2=Multimode 62.5/125
Cable Length (meters)
XXXX (specify length)
10 meters=0010
Leg Diameter
F = Furcated End A / MTP End B
N = 900µm End A / MTP End B
ordering information
Connector End B
Single-mode
ATM = Angle Male MTP
ATF = Angle Female MTP
XXX = No Connector
ASC = Angle SC
USC = Ultra SC
ULC = Ultra LC
UST = Ultra ST
Multimode
PSC = Physical SC
PLC = Physical LC
PST = Physical ST
XXX = No Connector
11
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
03.03.04
optical connectivity
Connectorized Jacketed Ribbon AssembliesAFL Telecommunications offers connectorized jacketed ribbon assemblies which feature up to 12 fibers in a ribbon structure offering a higher density configuration than conventional buffered designs. The Connectorized Jacketed Ribbon assemblies are easily installed, 100% tested, and are available in jumper, pigtail or hybrid configurations.
features• 4, 6, 8 and 12 fiber single-mode or
multimode available
• SC, FC, ST and LC Connector types
• Angle polished for single-mode SC and FC
length tolerance
+200mm / -0 for lengths < 8 meters+4% / -0 for lengths > 8 meters
• 5 meter breakout lengths (standard)
• Breakouts available in 900µm or 2.4mm furcated
• LC breakouts available in 900µm or 1.6mm furcated
Color Furcation - Fiber Number Reference
1 Blue 4 Brown 7 Red 10 Violet
2 Orange 5 Slate 8 Black 11 Rose
3 Green 6 White 9 Yellow 12 Aqua
ordering information
Connector End A
Single-mode
ASC = Angle SC
AFC = Angle FC
USC = Ultra SC
UFC = Ultra FC
UST = Ultra ST
ULC = Ultra LC
Multimode
PSC = SC MM
PFC = FC MM
PLC = LC MM
PST = ST MM
Cable Type
JR = Jacketed Ribbon
CR = Bare Ribbon
Fiber Count
4 = 004
6 = 006
8 = 008
12 = 012
Fiber Type
Q = Single-mode
R = Multimode 50/125
2 = Multimode 62.5/125
Cable Length (meters)
0010 = 10 meters
(specify length)
Leg DiameterN = 900µm End A / XXX End B
NN = 900µm End A and B
F = Furcated End A / XXX End B
FF = Furcated Ends A and B
FN = Furcated Ends A / 900µm End B
NF = 900µm End A / Furcated Ends B
Connector End B
Single-mode
ASC = Angle SC
AFC = Angle FC
USC = Ultra SC
UFC = Ultra FC
UST = Ultra ST
ULC = Ultra LC
XXX = No connector
Multimode
PSC = SC MM
PFC = FC MM
PLC = LC MM
PST = ST MM
XXX = No connector
12
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.17.04
optical connectivity
Circular Premise Cable Assemblies
features• Riser-rated is standard (plenum available)
• Fiber counts up to 144 fibers with aramid yarn reinforcement for rugged protection
• Highly flexible for ease of routing
• Available with ST, SC, FC and LC connectors in both single-mode and multimode
AFL Telecommunications’ higher fiber count Circular Premise Cable (CPC) assemblies provide safe and cost effective installation for many applications. High Fiber Count assem-blies help eliminate labor-intensive field termination, yet guarantee reliable performance. Featuring a unified construction allowing for easy fiber identification and rapid installation, these assemblies are built to exceed all TIA and Telcordia requirements.
• Jumper, pigtail and hybrid configurations
• Pre-installed pulling eye kits available on certain products up to 144 fiber
• Standard breakout length is 1 meter (1⁄2 meter available as a nonstandard)
• 900µm legs or furcated 2.4mm legs available (1.6mm furcated for LC assemblies)
Connector End A
Single-mode
ASC=Angle SC
AFC=Angle FC
USC=Ultra SC
UFC=Ultra FC
UST=Ultra ST
ULC=Ultra LC
Multimode
PSC=SC MM
PFC=FC MM
PLC=LC MM
PST=ST MM
NOTE: Duplex SC and LC available
Cable Type
RC=Riser (CPC)
PC=plenum (CPC)
Fiber Count
006=6
012=12
024=24
036=36
048=48
072=72
096=96
144=144
Fiber Type
Q=Single-mode
R=Multimode 50/125
2=Multimode 62.5/125
Cable Length (meters)
XXXX (specify length)
10 meters=0010
Leg DiameterN=900µm End A / XXX End B
NN=900µm End A and B
F=Furcated End A / XXX End B
FF=Furcated Ends A and B
FN=Furcated Ends A / 900µm End B
NF=900µm End A / Furcated Ends B
ordering information
Connector End B
Single-mode
ASC=Angle SC
AFC=Angle FC
USC=Ultra SC
UFC=Ultra FC
UST=Ultra ST
ULC=Ultra LC
XXX=No connector
Multimode
PSC=SC MM
PFC=FC MM
PLC=LC MM
PST=ST MM
XXX=No connector
dimensions
13
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.17.04
optical connectivity
features• Fiber counts from 24 to 144 fibers
• Available with ST, SC, FC, and LC connectors single-mode
• Standard configuration is Pigtail
(non-standard configurations available)
• Pre-installed pulling eye kits available
PreTerminated Indoor / Outdoor Cable Assemblies AFL Telecommunications high fiber count Loose Tube and Riser Rated Loose Tube cable assemblies provide a safe and proven method of utilizing preterminated connector technol-ogy for outside plant applications. High fiber count cable assemblies help control cost by eliminating labor-intensive field termination and provide the same factory terminated reliability the industry has trusted for many years. Cable assemblies are available in Outside Plant Loose Tube (LT) and Riser-Rated Loose Tube (RL). RL cable is suitable for use in indoor and outdoor applications. Each unit is manufactured to exceed all TIA and Telcordia requirements.
Riser Rated Loose Tube
specifications
applications• Outdoor Cabinets
• External-Building Runs
• Vaults
• CEV’s.
cable components
Indoor/Outdoor Stranded Design loose tube cable is moisture and U.V. resistant, S-Z stranded for easy mid-span access, UL-listed type OFNR (UL1666) riser-rated, and can be used in both duct and lashed applications.
PVC jacket
• Standard Breakout length is 1 meter
• Standard furcation 2.4mm ST, SC, FC, 1.6mm LC
• UV resistant outer jacket
• Dry Core design
• Meets Bellcore GR-20-CORE
Loose Tube cable componentsAFL Stranded Design cables feature fiber counts up to 432, compliance with EIA/TIA and REA/RUS PE-90, and are S-Z stranded for easy mid-span access.
temperature range
Parameter Value
Operating -40°C to +70°C
Storage -40°C to +75°C
Installation 0°C to +70°C
temperature range
Parameter Value
Operating -40°C to +70°C
Storage -40°C to +75°C
Installation 0°C to +70°C
strength member
binder
dry water blocking system
dielectric center memberoptical fibers
rip cord
gel-filled buffer tube
Polyethylene jacket
strength member
binder
water blocking system
dielectric center memberoptical fibers
rip cord
gel-filled loose tube
coated corrugated steel armor
14
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.17.04
optical connectivity
Connector End A
Single-mode
ASC=Angle SC
AFC=Angle FC
USC=Ultra SC
UFC=Ultra FC
UST=Ultra ST
ULC=Ultra LC
Cable Type
LT=Loose Tube
RL=Riser Rated Loose Tube
Fiber Count
024=24
036=36
048=48
072=72
096=96
144=144
216=216
Fiber Type
Q=Single-mode
Cable Length (meters)
XXXX (specify length)
10 meters=0010
Leg DiameterN=900µm End A / XXX End B
NN=900µm End A and B
F=Furcated End A / XXX End B
FF=Furcated Ends A and B
FN=Furcated Ends A / 900µm End B
NF=900µm End A / Furcated Ends B
ordering information
Connector End B
Single-mode
ASC=Angle SC
AFC=Angle FC
USC=Ultra SC
UFC=Ultra FC
UST=Ultra ST
ULC=Ultra LC
XXX=No connector
dimensions
PreTerminated Indoor / Outdoor Cable Assemblies
lengths available
Cable lengths are dependent on fiber cable type and count. Consult customer service for maximum lengths available.
15
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
10.14.03
optical connectivity
All AFL Telecommunications’ FRSC cables are factory tested to meet stringent installation performance demands. Our cabling is designed to make splicing from an optical node to a closure fast, easy and reliable. It significantly reduces splicing time and effort by eliminating a fusion splice point. FRSC cables are available in standard and custom lengths in 2-12 terminations with various connector types such as SC/APC, SC/UPC, FC/APC, FC/UPC and E2000/APC.
LightLink™ Fiber Receiver Service Cable
features • Field proven, durable connecting
hardware
• High quality optical terminations meet all geometric and optical performance requirements
• Ordering flexibility; available in standard and custom lengths and connector counts
specifications
Parameter Value
Operating Temperature °F (°C) -40 to 158 (-40 to 70)
Storage Temperature °F (°C) -58 to 158 (-50 to 70)
Crush Resistance lbs. (kg) 1000 (453.5 kg)
Impact Resistance 25 lbs. @ 2.2 lbs. per foot (11.25 kg @ 0.99 kg)
Flexing 25 lbs. @ 5 in. (11.25 kg @ 12.7 kg)
Fiber Core Diameter (microns) 8.3
Maximum Insertion Loss (dB) 0.25 (UPC), 0.35 (APC)
UPC Return Loss (dB) -55
APC Return Loss (dB) -68
Outer Jacket Material Riser-rated PVC
Finish Nickel-tin plated brass
Cable Pullout Tensile Strength lbs. (kg) 247 (112.04)
Entry Threads in. 0.625 x 24
Dimensions in. (cm) 4.25 long x 0.875 diameter (10.8 x 2.22)
Fiber Receiver Service Cable with Standard PE Jacket - Armored and Non-Armored
• Mini-central core type cable
• Installed hard-line entry connector
• Filled cable
• Individualized serial numbers
• SC/UPC, FC/UPC, SC/APC, FC/APC
• Two to twelve fiber counts available
16
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
10.14.03
optical connectivity
Grommet Specifications - Standard D
Inner Diameter 0.375”
Active Pull Test 35 lbs.
Overall length 45mm
Hex Nut Size 7/8”
Length from Hex Nut to end of front body
6mm
Material Aluminum Gold Anodized
Color Furcation - Fiber Number Reference
1 Blue 4 Brown 7 Red 10 Violet
2 Orange 5 Slate 8 Black 11 Rose
3 Green 6 White 9 Yellow 12 Aqua
• Polyurethane indoor/outdoor loose tube single-mode cable
• Polyurethane jacket reinforced with aramid yard for exceptional durability
• Easy installation
• Design eliminates movement of cable components
• 900µm or 2.4mm upjacketed color-coded legs
• Breakout length 1 meter
• Available in single-mode pigtails
• Pulling strength in excess of 150 lbs.
• Anti-twist crimp
specifications
features• Flexible bend radius of 19cm for
installation and 10cm for operation
• Variety of single-mode connector styles (not available in multimode)
• Cable cut and terminated to custom lengths (maximum 100 meters)
• Connector ends clearly labeled for quick identification
• Available in fiber counts from 2-12 fibers
• Ultra Polish available for all connector types
• Angle Polish available on FC and SC connectors
Fiber Receiver Service Cable with Non-Armored All-Dielectric UniFlex™
LightLink™ Fiber Receiver Service Cable
Connector End A
Single-mode
ASC=Angle SC
AFC=Angle FC
USC=Ultra SC
UFC=Ultra FC
UST=Ultra ST
ULC=Ultra LC
Cable Type
NC=Uni-Flex
NA=Non-Armored PE
AN=Armored PE
Fiber Count
002=2
004=4
006=6
008=8
010=10
012=12
Fiber Type
Q=Single-mode
Cable Length (meters)
XXXX (specify length)
10 meters=0010
Leg DiameterN=900µm End A / XXX End B
F=Furcated End A / XXX End B
ordering information
Connector End B
Single-mode
XXX=No connector
17
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
03.03.04
optical connectivity
Advanced Fiber Assemblies
AFL Telecommunications’ Advanced Fiber Assembly (AFA) technology encompasses all specialty pigtails and optical interfaces used in active and passive devices. The AFA prod-uct family includes customized SM and PM assemblies, hermetic pigtails, capillary-based terminations, lensed fibers, and arrays. AFL Telecommunications’ offers the industry’s only One-Stop-Shop for metalized and non-metalized hermetic pigtails, complete with connec-tivity, lensed fibers, customized Kovar feedthoughts, AR coatings, and Fiber Bragg Gratings for wavelength stability.
End BAlignment End BAR Coating
Assembly Length
Ferrule Type
Metalization
Jacket Type
Fiber TypeConnector End A
Alignment End A
features
advanced fiber assembliesordering information
A
Fiber Type1 = Single-mode
2 = PANDA® 1550
3 = PANDA® 980
4 = Multimode, 62.5
5 = Custom
F A - - -
Jacket Type1 = 250µm
2 = 400µm
3 = 900µm
4 = 900µm Hytrel
5 = 3mm PVC
6 = Custom
Connector A0 = No Connector
1 = FC/UPC
2 = FC/APC
3 = SC/UPC
4 = SC/APC
5 = LC/UPC
6 = Custom
- 3 4 2 2 0 0 0 0 0
End B0 = Bare Fiber
1 = Capillary (1.8mm x 6mm)
2 = Lensed Fiber (Wedge)
3 = Lensed Fiber (Conical)
4 = 0 Degree Polish
5 = 8 Degree Polish
6 = Custom
Alignment0 = No Alignment
1 = Slow Axis
2 = Fast Axis
3 = Custom
Alignment0 = No Alignment
1 = Slow Axis
2 = Fast Axis
3 = Custom
ARC B0 = No ARC
1 = 1550nm, < 0.3%
2 = Custom
Metalization0 = Metalization
1 = 10mm
2 = 13mm
3 = 17mm
4 = 20mm
5 = Custom
Kovar Ferrule (ODxL)0 = No Ferrule
1 = Ferrule A (2.5 x 10mm)
2 = Ferrule B (1.6 x 10mm)
3 = Ferrule C (0.9 x 6mm)
4 = Custom
Jumper Length0 = Custom
1 = 1 meter
2 = 2 meters
3 = 3 meters
4 = 4 meters
5 = 5 meters
2
Fiber Type Jacket Type Connector A Alignment A End B Alignment B ARC B Metalization Kovar Ferrule Length
End BEnd A
18
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
03.03.04
optical connectivity
Lensed Fiber TechnologyLensed fibers are rapidly becoming the method of choice for interfacing optical fiber to active devices and waveguides. Lensing technology provides highly efficient couplings while consuming a fraction of the space and costs of bulk optic alternatives.
AFL Telecommunications’ proprietary laser shaping technology enables high-end lenses to be manufactured in volume at low costs. The laser quickly shapes the fiber tip into a precise geometry using an optimized numerical solution based on the targeted far-field profile. In-line far-field monitoring ensures repeatability and high coupling efficiency.
This technology provides 10 times the throughput of conventional mechanical methods. Furthermore, the yield loss from laser shaping is less than one percent, compared to 10-20 percent for mechanical matching. These exceptional yields allow high-value fiber (i.e. FBGs, PM fiber, metalized fiber, etc.) to be lensed at minimal costs while maintaining process flow flexibility.
AFL Telecommunications’ Advanced Fiber Assembly platform allows OEMs to consolidate suppliers of metalized fiber, hermetic sleeves, AR coatings, Lensing, Fiber Bragg Gratings and connectorization into a single source for the entire pigtail assembly.
features
Lensed fiber technology offers advantages over traditional mechanical and fusion lensing methods;• Increased coupling efficiency – lensed fiber offers precise geometry and surface finish
compared to mechanical/fusion methods
• Increased performance – laser machining offers optimization around focal length, spot size and far-field parameters
• Increased reliability – Far-field feedback loop eliminates rework and inspections
• Increased reproducibility and flexibility – lensing provides optimized geometry created by numerical solution
• Increased Value – high yields enable packaging of customized total solutions
conical lens
Biconical
Cylindrical or “Wedge”
Symmetrical or “Conical”
Angled Cylindrical
Angled Biconical
Angled Cleave
19
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
03.03.04
optical connectivity
angled endfaceParameter ValueAngle (degrees) 0 - 60
Angle tolerance (degrees) + / -1
PM axis tolerance (degrees) + / -2
fiber typesSM, MM, PANDA®, Tiger
Single fiber and Ribbon
980nm, 1480nm, 14xxnm stabilization (FBG)
conical lensParameter Standard Grade* Custom Grade**Included angle (degrees) 80 - 110 50 - 80
Angle tolerance (degrees) + / -1 + / -1
Tip radius (microns) 5 - 20 3 - 5
PM axis tolerance (degrees) + /- 2 + / -2
Lens centration (microns) 1.0 0.5*2 week lead time **4 to 6 week lead time
angled & bionic wedgeParameter Standard Grade* Custom Grade**Included angle (degrees) 80 - 110 50 - 80
Angle tolerance (degrees) + / -1 + / -1
Tip radius (microns) 5 - 20 3 - 5
Lens asymmetry 2.5 - 4.5 1 - 5
PM axis tolerance (degrees) + /- 2 + / -2
Lens centration (microns) 1.0 0.5
Lensed Fiber Technology
*2 week lead time **4 to 6 week lead time
TechniqueProcess Speed
(lenses/hr)Process Yield(Relative %)
Capability(lens type*)
Quality(Relative Scale)
Flexibility(Change Over Time) QA method
Relative Pricing($/unit)
AFL Laser Shaping 120 99% SLF, CLF, ACLF, BIC, ABIC, Cleave
10 10 s in-situ far-field, feedback
$
Mechanical Polishing 3 70% SLF, CLF, ACLF, Cleave 10 1 hour off-line $$$
Reverse Fusion Splice
60 60% SLF 3 n/a $$
Etch and Melt 10 60% SLF 4 n/a off-line $$$
Grind and Melt 6 50% SLF, CLF, Cleave 6 1 hour off-line $$
* Lens type abbreviations: SLF Symmetrical Lensed Fiber (Conical lens) CLF Cylindrical Lensed ACLF Angled Cylindrical Lensed Fiber BIC Biconical Lensed Fiber (SLF followed by CLF) ABIC Angled Biconical Lensed Fiber (SLF followed by ACLF)
comparison of various lensing methods
20
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
03.03.04
optical connectivity
features• Metalized SM or Polarization Maintaining
(PM) fibers
• Kovar ferrule construction for thermal stability and device attachment ease
• Hermetic seals greater than 10-8 cc/sec helium
Hermetic Fiber Assemblies
Hermetic Fiber Assemblies are designed to meet today’s environmental sealingrequirements for optical components used in military, telecommunication and sensing applications. The assembly is designed to integrate hermetic functionality (metalized and non-metalized), mechanical robustness, optical integrity and performance into a single package. Termination options include high-performance connectors, capillaries, lensed fibers and bare fiber endfaces.
applications• Laser Packages (LDs, Source Lasers, etc.)
• Military Components
• DWDM Components
• Modulators
• Attenuators
• Sensors
• Fiber Optic Gyros
• Guaranteed polarization alignment throughout assembly for PM-based designs
• Rugged construction designed to meet Telcordia and Military mechanical/environmental requirements
• Standard and custom designs available
specifications
Metalization Property Specification and Limits
Coating Type Nickel/Gold
Coating Thickness Gold Nickel
0.1 to 0.2 µm4.0 + 1 µm
Dimensional Tolerances Metalization Length Fiber Tip Length (non-metalized 125 µm) Metalization/250 µm Overcoat Length
3.0 to 40.0 + 1.0 mm0.2 to 20.0 + 1.0 mm0 to 5 mm
Physical Properties Metal-Glass Adhesion Hermeticity Pull Strength (Kovar ferrule-to-fiber) Solder Compatibility Operating Temperature
> 1Kg < 10-9 ATM cc/sec He> 1Kg SnPb, InAg, AuSn-40ºC to + 85ºC
Fiber Types PANDA/PM, SM, MM
21
www.AFLtele.com or 1.800.235.3423 Specifi cations are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
03.03.04
optical connectivity
features• High extinction ratio
• Low insertion loss
• Custom polarization orientation
• Custom designs available
Polarization Maintaining (PM) Assemblies
cross section of PANDA® fiber relative to connector key
Advances in telecommunications and optical technology have led to a demand for polariza-tion control in optical signal processing. AFL Telecommunications offers SC, FC and LCstyle jumpers with the optical polarization control of PANDA® fi ber. Fujikura PANDA fi ber is recognized worldwide as the industry standard for polarization maintaining applications.
applications• Polarization based modulators
• Fiber Optic Gyros
• High bit rate telecommunications
• Interferometry
• Optical amplifi ers
specifications
1. Please specify the length upon ordering 2. LC not available in APCNOTE: Unless otherwise stated, the specifi cations listed were measured at ambient temperature (25 ±5°C)
Parameter Standard (SC/FC/LC) Premium (SC/FC/LC)
Polish UPC APC UPC APC
IL (dB) <0.5 <0.5 <0.3 <0.3
RL (dB) >50 >60 >55 >65
Polarization Axis Alignment Accuracy ( + ) 3° ( + ) 3° ( + ) 3° ( + ) 3°
Extinction Ratio >25 >25 >27 >27
Fiber Type Fujikura PANDA®
Fiber Length (including connectors1) 0 to 5.0m
Operating Temperature
Storage Temperature
using UV/UV-250 or UV/UV-400 -20 to +70°Cusing UV/NY-900 +5 to +45°C -40 to +70°C
FC Key Width (External) narrow key 1.97-2.02mm
*** Max. Length is 5 meters
+ Please call AFL for detailed information on customized specifi cations and other fi ber types
ordering information
Fiber Type1 = PANDA® 1550
2 = PANDA® 980
3 = Custom
Jacket Type1 = 250µm
2 = 400µm
3 = 900µm
4 = 900µm Hytrel
5 = 3mm PVC
6 = Custom
Connector B0 = No Connector
1 = FC/UPC
2 = FC/APC
3 = SC/UPC
4 = SC/APC
5 = LC/UPC
Connector BAlignment0 = No Alignment
1 = Slow Axis
2 = Fast Axis
3 = Custom
Connector AAlignment0 = No Alignment
1 = Slow Axis
2 = Fast Axis
3 = Custom
Connector A0 = No Connector
1 = FC/UPC
2 = FC/APC
3 = SC/UPC
4 = SC/APC
5 = LC/UPC
Jumper Length00 = Custom
01 = 1 meter
02 = 2 meters
03 = 3 meters
04 = 4 meters
05 = 5 meters
P M J –
22
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
10.14.03
optical connectivity
features• 127µm and 250µm fiber to fiber spacing (custom spacings available)
• Etched silicon process ensures high accuracy and reproducibility
• Small core position eccentricity
• Designed to meet Telcordia and Military specifications
Fiber ArraysAFL Telecommunications manufactures silica and silicon fiber arrays for military andtelecommunications applications. Fiber arrays are the building blocks for the interfacingof AWGs, PLCs, and high-density terminations. The arrays are available in 16, 24, 48,and custom channel counts. Fanout terminations include FC, SC, LC and MU. Ribbon terminations include MPO, MTP and MPX.
specifications
Type Width [mm] Length [mm] Height [mm]
4-channel 2.0 ± 0.05 6.5 ± 0.5 1.075 ± 0.05
16-channel 6.0 ± 0.1 12.0 ± 0.3 3.0 ± 0.1
24-channel 9.0 ± 0.1 12.0 ± 0.3 3.0 ± 0.1
48-channel 9.0 ± 0.1 12.0 ± 0.3 3.0 ± 0.1
V-groove pitch 127 ± 0.5 micron (Half pitch)250 ± 0.5 micron (Full pitch)
Eccentricity of core position ± 1.0 micron in X-axis and Y-axis
End face angle
Horizontal direction: 8 ± 0.3°Horizontal direction: 90 ± 0.3°
Material Silicon
24
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2004, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
LC, SC, & ST Field Master™ ConnectorsAFL Telecommunications offers a new and improved Field Master connector for field termi-nation of fiber optics. Expanding upon its field proven process by strengthening the design, we have enhanced the high precision, high reliability and low applied connector cost that you can expect from AFL Telecommunications. Durable metal components, industry-stan-dard connector designs and proven crimp technology gives the customer peace-of-mind that their installed network is steady and reliable. Field Master Tool Kits come complete with all necessary tools and consumables for the professional installation of AFL’s Field Master Connectors.
features• High precision ceramic ferrules insure fiber alignment and repeatable performance.
• Rugged metal connector bodies provide sturdy cable terminations.
• Industry standard interfaces allow interoperability with media equipment.
• Meets EIA/TIA 568A performance requirements.
• Field proven crimp technology improves connector/cable tensile performance and insures cable terminations are secure.
• The superior combination of performance and low cost.
Field Master™ Connectors*
Connector Description Part No.SC mm FM connector 900µm CS000308*
SC mm FM connector 3.0mm CS000309*
SC sm FM connector 900µm CS000310*
SC sm FM connector 3.0mm CS000311*
ST mm FM connector 900µm CS000316*
ST mm FM connector 3.0mm CS000317*
ST sm FM connector 900µm CS000318*
ST sm FM connector 3.0mm CS000319*
LC mm FM connector 900µm CS000320*
LC mm FM connector 2.0mm CS000321*
LC sm FM connector 900µm CS000322*
LC sm FM connector 2.0mm CS000323*
* Packaged 100 pieces per box.
Field Master™ Tools and Kits
Description Part No.Field Master Tool Kit - no crimp tool FM000065
Crimp Tool with die set CS000337
ordering information
applications• Premise environments
• Connections at the desk for LAN environments
• Patch panels
Field Master™ Tool Kit
• Quick and easy to use
• Compact
• Complete instructions included
• For use with ST and SC Field Master™ Connectors
Field Master™ kits come complete with all necessary tools and consumables to professionally install Field Master™ connectors.
Field Master™ Tool Kit
• Direct equipment termination
• Fiber to the Subscriber (FTTx) applications
• Repair / replacement requirements
25
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
10.14.03
optical connectivity
Loopback ConnectorThis standard fiber channel design is used in testing transceiver systems. The loopback is rugged and compact to withstand multiple uses and features a flexible length for any testing requirements.
ordering information
Item Cable Item Number
SC Loopback, SM 250µm, 2 meters C185774
SC Loopback, MM, 50/125 250µm, 2 meters C159013
SC Loopback, MM, 62.5/125 250µm, 2 meters C178670
26
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
10.14.03
optical connectivity
features• Terminates plastic fiber optic cable in
seconds without tools, adhesives or polishing
• Compatible with 1000µm diameter simplex fiber with an OD of 2.25 mm
• Polarized plug provides positive, snap retention with a quick-release latch
Plastic Optical Fiber Data Link SystemThe AFL Optical Data Link combines the benefits of fiber optic signaling with the con-venience of plug-in PCB electrical termination. It is designed to permit fast, reliable, self-termination of single channel plastic optical fiber without the needs of special tools, adhesives or polishing.
• Suitable for terminating data transmission links at data rates of 3Mb/s
• Opto-electrical interface includes a TTL compatible receiver and LED driver
• Color coded housings enable easy identification of transmit or receiver ends
Part Number Description
92915-T-DD Transmitter (red) 3 Mb/s
92915-T-AB Transmitter (red) 3 Mb/s
92915-R-HS-4 Receiver (black) 3 Mb/s
92910 Plug (black) 2.25mm POF
92910-R Plug (red) 2.25mm POF
92910-C5 Plug (black) 5mm POF
92910-R-C5 Plug (red) 5mm POF
93902-100 100 ft reel Simplex cable, 2.2mm
93902-500 500 ft reel Simplex cable, 2.2mm
93802-100 100 ft reel Duplex cable,2.2mm zip
93802-500 500 ft reel Duplex cable, 2.2mm zip
93903-100-AB 100 ft reel Ruggedized Simplex cable, 5mm
93903-500-AB 500 ft reel Ruggedized Simplex cable, 5mm
applications• Industrial Controls
• Automation remote sensing
• Audio visual links
• Automotive networking
• Office communication equipment ordering information
27
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
03.03.04
optical connectivity
features• Precision hole diameter and position
• Stainless steel or steel alloy ferrules
• Ruggedized connector construction
• Industry standard SMA, ST, or FC interfaces
• Applicable to large core glass or plastic fibers
• Custom sizes available
Precision ConnectorsCustom drilled hole sizes are produced very precisely in the metal ferrules of industry standard connectors such as the ST, FC and SMA. A range of sizes from 140 micron to 1235 microns are typical, but customer specific sizes are possible. Stainless steel or steel alloy (Arcap) are available depending on the customer’s requirement.
applications• Industrial controls
• Medical sensing
• Aerospace/military
• Data processing networks
• Optical security systems
ordering information
CONNECTOR STYLE PART NUMBER SERIES
SMA Connector 698-DSC-XXXX
ST Connector 68290-XXXX
FC Connector 69301-XXXX
28
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
SC AdaptersSC adapters are used to mate industry standard SC connectors. Adapters are available with metal and ceramic alignment sleeves, and are color coded for easy identification. The duplex adapters accept two simplex connectors or one duplex connection. Hybrids are available for special applications.
SC Duplex Adapters
Type Mode Description Insert Color Part Number
SC Duplex MM Long Flange Bronze Beige C209383
SC Duplex MM Long Flange Ceramic Beige C209081
SC Duplex SM No Clip / Screw Mount Ceramic Blue C094862
SC Duplex SM Long Flange Ceramic Blue C092258
SC Duplex SM No Clip / Screw Mount Metallic Blue C096261
SC Duplex SM Long Flange Metallic Blue C092266
SC Simplex Adapters
Type Mode Description Insert Color Part Number
SC Simplex MM SC-A Type Ceramic Beige C209560
SC Simplex MM SC-A Type Polish Bronze Beige C209563
SC Simplex SM SC-A Type Ceramic Blue C028851
SC Simplex SM Short Flange Ceramic Blue C058475
SC Simplex SM SC-A Type Ceramic Plated C002766
SC Simplex SM SC-A Type Metallic Blue C033235
SC Simplex SM Short Flange Metallic Blue C057037
SC Simplex SM SC-A Type Metallic Plated C002507
SC Simplex SM / AP SC-A Type Ceramic Green C080810
SC Simplex SM / AP Short Flange Ceramic Green C147880
SC Style Adapters
Type Mode Description Insert Color Part Number
SC Simplex SM with Shutter Assembly Metallic Blue C097268
SC Simplex SM with Shutter Assembly Ceramic Blue C096210
SC Simplex SM / AP with Shutter Assembly Ceramic Green C116004
SC Simplex Shutter Only N/A N/A N/A C087734
SC Simplex Adapters
SC Duplex Adapters
The SC Adapter shutter is a safety feature used to prevent potentially harmful exposure to the eye when the connector is not installed or is disengaged. A spring-loaded door auto-matically covers the adapter when the connector is not installed as safety protection.
SC Adapter Shutter
29
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
LC AdaptersLC style adapters are used in high density applications and feature a quick plug in instal-lation. Adapters are available in both simplex and duplex designs and utilize high quality zirconia and phosphorous bronze sleeves. The LC duplex adapter uses the same cutout as the copper RJ-45, resulting in less redesign work when retrofitting existing panels.
Type Mode Insert Color Part Number
LC Duplex SM Ceramic Blue C178298
LC Duplex MM Metallic Beige C203956
LC Simplex SM Ceramic Blue C186363
LC Simplex MM Metallic Beige C209176
Type Mode Description Insert Color Part Number
MTP SM/MM Flange Mount — Black C057010
Type Mode Description Insert Color Part Number
FC - SC Simplex SM / AP Angled Adapter Ceramic Stainless Steel C130082
FC - SC Simplex SM Square Mount Metallic Stainless Steel C004127
FC - ST Simplex SM Square Mount Metallic Stainless Steel C002401
FC - ST Simplex SM Square Mount Ceramic Stainless Steel C032980
SC - FC Simplex SM Flat Mount Metallic Stainless Steel C033022
SC - FC Simplex SM Square Mount Ceramic Stainless Steel C002453
SC - FC Simplex SM Flat Mount Ceramic Stainless Steel C033030
SC - ST Simplex SM Flat Mount Metallic Blue C002499
SC - ST Simplex SM Square Mount Metallic Stainless Steel C004133
SC - ST Simplex SM Flat Mount Ceramic Blue C024392
SC - ST Simplex SM Square Mount Ceramic Stainless Steel C038733
The MTP adapter connects two industry standard MTP connectors. The compact MTP adapter measures 25mm x 10mm and is found in high density applications.
MTP® Adapters
Hybrid FC, SC and ST adapters are available to fit specific application needs.
Hybrid Adapters
30
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
FC AdaptersFC adapters connect industry standard FC connectors and are available in Square-Mount, D-Mount and Flange-Mount versions. Our FC adapters feature a metal body for long life and are available with either ceramic or metallic sleeves. The FC D-Mount adapter easily installs into panel mount applications and conforms to JIS C5970. FC Square-Mount meets Bellcore GA326 and the angle polish versions meet the industry standard 2.0mm key width. An assortment of hybrid configurations is available.
Type Mode Description Insert Color Part Number
FC Simplex SM / AP Square Mount Ceramic Metal C143346
FC Simplex SM Square Mount Ceramic Metal C146558
FC Simplex SM D Mount Metallic Metal C143680
FC Simplex SM / AP D Mount Ceramic Metal C146566
FC Simplex SM D Mount Ceramic Metal C145357
FC Simplex SM Square Mount Die Cast Metallic Metal C066443
ST adapters connect industry standard ST connectors and are available in D-Mount and Flange-Mount versions. ST adapters are available with ceramic or metallic sleeves, feature a metal body for long life, and easily install in panel mount applications.
Type Mode Description Insert Color Part Number
ST Simplex SM Flange Mount Ceramic Metal C007976
ST Simplex SM Flange Mount Metallic Plastic Black C007930
ST Simplex SM Only D Mount Ceramic Metal C094994
ST Simplex MM Only D Mount Metallic Metal C096377
MT-RJ adapters connect industry standard MT-RJ connectors in high-density applications. MT-RJ adapters are keyed for proper alignment and conform to RJ-45 modular plates. Mounting hardware is not included.
Type Mode Description Insert Color Part Number
MT-RJ Duplex MM Flange Mount — Beige C196855
ST Adapters
MT-RJ Adapters
31
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
Buildout-Style Attenuators
specifications• Standard Attenuation Values: 5, 10, 15
and 20 dB
• Attenuation Tolerance: Standard at 10%
• Operating Temperature Range:
-40 to +75°C
• Vibration resistance: <0.1X attenuation value
• Back Reflection:
-55dB in Ultra Polish (UPC)
-60dB in Angle Polish (APC)
• Operating Wavelength:
1310 & 1550nm +/-25nm
Buildout-style attenuators provide superior performance for all single-mode in line attenu-ation requirements. These attenuators have been engineered to supply high performance with stable attenuation values at a low cost. Standard attenuation values are 3, 5, 10, 15 and 20 dB. Buildout attenuators are available in SC, ST, LC, and FC connector styles and the designs use no air gap, filters or light path discontinuities. Attenuation is achieved by controlled absorption of light energy. This results in a polarization insensitive device with high power handling capability, environmentally stable and exceptionally responsive across a wide bandpass range.
Ultra FC single-mode BOAs (male to female)
Config. Part No. Value (Db) Back Refl.
FC / UP C201004 1 > 55dB
FC / UP C201010 2 > 55dB
FC / UP C201013 3 > 55dB
FC / UP C201017 4 > 55dB
FC / UP C201022 5 > 55dB
FC / UP C203303 6 > 55dB
FC / UP C203308 7 > 55dB
FC / UP C203314 8 > 55dB
FC / UP C203317 9 > 55dB
FC / UP C201028 10 > 55dB
FC / UP C203321 11 > 55dB
FC / UP C203326 12 > 55dB
FC / UP C201031 15 > 55dB
FC / UP C201035 20 > 55dB
FC / UP C203332 25 > 55dB
FC / UP C203335 30 > 55dB
Angle FC single-mode BOAs (male to female)
Config. Part No. Value (Db) Back Refl.
FC / AP C197878 5 > 60dB
FC / AP C197881 10 > 60dB
FC / AP C197885 15 > 60dB
FC / AP C197890 20 > 60dB
NOTE: Attenuators are available in 1dB increments. Contact customer service for ordering information.
features• Long-term reliability
• Excellent environmental stability
• Low ripple, wavelength independent attenuation
• Certified to more than 125mw continuous power handling capability with no degradation in performance
• Polarization insensitive
• Bellcore approved
application
Broadband Network, Video Distribution, Long Haul Telecommunications (CLEC, CAPS), Local Area Networks (LAN), Network Testing, Passive Optical Networks, Telco, Fiber in the Loop
Config. Part No. Value (Db) Back Refl.
SC / UP C200938 1 > 55dB
SC / UP C200941 2 > 55dB
SC / UP C200945 3 > 55dB
SC / UP C200950 4 > 55dB
SC / UP C200956 5 > 55dB
SC / UP C200959 6 > 55dB
SC / UP C201946 7 > 55dB
SC / UP C200963 8 > 55dB
SC / UP C201949 9 > 55dB
SC / UP C200968 10 > 55dB
SC / UP C201953 11 > 55dB
SC / UP C201958 12 > 55dB
SC / UP C200974 15 > 55dB
SC / UP C200977 20 > 55dB
SC / UP C200981 25 > 55dB
SC / UP C200986 30 > 55dB
Config. Part No. Value (Db) Back Refl.
SC / AP C197899 5 > 60dB
SC / AP C197903 10 > 60dB
SC / AP C197098 15 > 60dB
SC / AP C197914 20 > 60dB
Ultra ST single-mode BOAs
Config. Part No. Value (Db) Back Refl.
ST / UP C222113 5 > 55dB
ST / UP C222118 10 > 55dB
ST / UP C222124 15 > 55dB
ST / UP C222127 20 > 55dB
Ultra SC single-mode BOAs (male to female)
Angle SC single-mode BOAs (male to female)
Ultra LC single-mode BOAs
Config. Part No. Value (Db) Back Refl.
LC / UP CS000091 5 > 55dB
LC / UP CS000092 10 > 55dB
LC / UP CS000093 15 > 55dB
LC / UP CS000095 20 > 55dB
32
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.17.04
optical connectivity
Attenuated Jumpers
applications
• Eliminate detection saturation• Maintain system uniformity• Convenient method to attenuate excess
signal
Attenuated Jumpers are used to reduce power in optical circuits. These attenuators offer very low back reflection in a cable-style assembly.
specifications
Single-mode
Low back reflection <-50 dB
Standard operating temperature range -40°C to +85°C
Single-mode attenuation tolerances ±1 dB @ 1310 and 1550 < ± 40nm (up to 10dB attenuation)±2 dB @ 1310 and 1550 ± 40nm (11dB and up attenuation)
features• Uniform attenuation over system
bandwidth
• Manufactured without index matching gels or oils
• Options include 250µm or 900µm jacket
• Wavelength dependent attenuation available
• Over ten years of proven field reliability
• Standard operating temperature -40°C to +85°C
• Typical change in insertion loss over the operating temperature range (dB) <±0.1
• Conforms to Bellcore TR-NWT-1209
• Excellent long-term reliability performance
Multimode
Low back reflection <-36 dB
Standard operating temperature range -40°C to +85°C
Single-mode attenuation tolerances ±1 dB @ 850 and 1300 (up to 10dB attenuation)±2 dB @ 850 and 1300 (11dB and up attenuation)
Note: Multimode attenuation is typically wavelength independent.
ordering information
Fiber TypeQ=Single-mode
R=50/125µm
2=62.5/125µm
A J A –
Cable Type
JH=900µm Coated PVC
PO=250µm Bare Fiber
Jumper Length (meters)
XXXX (specify length)
0010=10 meters
Connector End A
Single-mode
ASC=Angle SC
AFC=Angle FC
USC=Ultra SC
UFC=Ultra FC
UST=Ultra ST
ULC=Ultra LC
Multimode
PSC=SC MM
PFC=FC MM
PLC=LC MM
XXX= No connector
Connector End A
Single-mode
ASC=Angle SC
AFC=Angle FC
USC=Ultra SC
UFC=Ultra FC
UST=Ultra ST
ULC=Ultra LC
Multimode
PSC=SC MM
PFC=FC MM
PLC=LC MM
Attenuation Value010 = -1.0dB
020 = -2.0dB
050 = -5.0dB
100 = -10.0dB
150 = -15.0dB
XXX = Custom (specify)
3333
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
10.14.03
optical connectivity
SC and FC Optical Terminators
specifications
Parameter Value
Reflectance <-55dB (ultra polish)
Reflectance <-60dB (angle polish)
Operating Temperature -40°C to +85°C
Operating Wavelength 1260nm to 1580nm
SC and FC optical terminators are used to terminate unused connector ports in fiber optic systems so that unwanted reflections are not introduced back into the system. SC and FC optical terminators feature zirconia ferrules for long life and durability.
ordering information
Description Item Number
FC/UP Terminator C067407
SC/UP Terminator C067393
FC/AP Terminator C082562
SC/AP Terminator C148828
3434
www.AFLtele.com or 1.800.235.3423 Specifi cations are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
Field Master™ Tool Kit
• Quick and easy to use
• Compact
• Complete instructions included
• For use with ST, SC, and LC Field Master™ Connectors
Item Description Part Number
Field Master™ Tool Kit FM000065
Kit Includes (consumables):
Cable Prep Template FM000426Yellow polish fi lm, 3.0µm (10 per pack) C006907-10Pink polish fi lm, 1.0µm (10 per pack) C006913-10Pink diamond fi lm, 3.0µm C078700Rubber polishing pad (5”) C015407Sharpie® permanent marker C015830Jacket stripper C015687Buffer stripper C015296Kevlar cutter C095257Scribe tool C182635Polishing puck - SC, ST CS000446Polishing puck - LC CS000338Cletop stick cleaner C008812Fiber prepartion fl uid FPF1-00-0001Applicator tips for adhesive C006037Water bottle (1 oz.) C015849Field installable adhesive w/MSDS (1.75 oz.) C180691Field installable primer w/MSDS (1.75 oz.) C181310Cloth wipes FM000413
* To order one kit with both tools, add tool other than that designated in the kit purchased
Field Master™ kits come complete with all necessary tools and consumables to profession-ally install Field Master™ connectors.
Crimp ToolItem Description Part Number
Crimp Tool with die set CS000337
353535
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
10.14.03
optical connectivity
Loose Tube Fanout KitsLoose tube fanout kits route 250µm fiber into 900µm tubes ready for connectorization. Easily installed in minutes, these kits require no special tools. Color coded tubing assists with easy identification. The furcation unit snaps together eliminating epoxy. Loose tube fanout kits are available in 6 and 12 fiber configurations.
ordering information
Fiber Count Length Cable Type Part Number
6 Fiber 24 inches Loose Tube Fanout Kit (3.0mm tube) C189826
12 Fiber 24 inches Loose Tube Fanout Kit (3.0mm tube) C189818
6 Fiber 36 inches Ribbon-Link® Fanout Kit C189842
12 Fiber 36 inches Ribbon-Link® Fanout Kit C189834
6 Fiber 36 inches Uni-Tube Fanout Kit C193114
12 Fiber 36 inches Uni-Tube Fanout Kit C193122
363636
www.AFLtele.com or 1.800.235.3423 Specifi cations are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
10.14.03
optical connectivity
For economical and fast removal of dirt, dust, oil and grease from adapters, choose AFL Telecommunication’s convenient adapter cleaners. Designed to thoroughly clean hard to reach areas and adapters, they require no alcohol or solvents and their small size makes them ideal for fi eld applications.
Adapter Cleaners
Cletop Ferrule Cleaner
features• Compact and light weight
• Ideal for assembly lines and in the fi eld
The Cletop Automatic Ferrule Connector Cleaner quickly and effectively cleans fi ber optic connectors without the need for alcohol or solvent wipes. The dry woven cloth effectively removes dirt, dust, oil, grease and debris from connector and end face. The Cletop-A is designed to clean SC, ST and FC connector types, while the Cletop-S has an open cleaning slot more suitable for LC, MTP and MT-RJ connectors.
Model Number Description Part Number
ACT-01 Adapter Cleaner Tips for SC, ST, FC (5 pack) C008812
ACT-02 Adapter Cleaner Tips for MU and LC (5 pack) C194404
Model Number Description Part Number
Cletop-A Cleaner for SC, ST and FC connectors C036692
Refi ll for Cletop-A C036684
Cletop-S Cleaner for LC, MTP and MT-RJ connectors CS000135
Refi ll for Cletop-S CS000136
• 400 swipes each reel
• Replacement reels are available (400 swipes per reel)
Cletop-A
Cletop-S
373737
www.AFLtele.com or 1.800.235.3423 Specifi cations are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
03.03.04
optical connectivity
The AFL Telecommunications Connector/Adapter Cleaning Kit is a complete kit solution for maintaining the optical integrity of passive network components such as connectors, jumpers, couplers, patch panels, etc. The Connector / Adapter Cleaning Kit includes all the necessary cleaning supplies you need to maintain clean ferrules and connectors in an organized, portable and rugged carrying case.
Connector/Adapter Cleaning Kit
kit includes• Rugged carrying case for complete protection and organization of supplies
• FCC-02R Prep Cleaner (1)
• FCC-R Replacement cartridge (400 wipes)
• ACT-01 Adapter Cleaner Tips (20)
• Alcohol dispenser (1)
• Lint free Kim Wipes
• Carry case
Description Part Number
Connector/Adapter Cleaning Kit C182120
ordering information
383838
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.17.04
optical connectivity
features• Dual window wideband operation
• Low insertion loss over entire bandwidth and temperature (typical IL change <±0.1 dB)
• Ultra-low PDL and temperature sensitivity
• High directivity
• Compact design
• Environmentally stable, over 10 years of proven field reliability
• Standard operating temperature range -4O °C to +85 °C
• Fully tested to Telcordia 1209 and 1221 criteria
Wideband CouplersThe dual window Wideband Couplers (WBC) split or couple optical power in two wave-length regions while maintaining a very broad operating bandwidth. Split and coupling ratios are available from 5% to 50%. WBCs are widely considered one of the most cost-effective solutions to optical power management. The WBC is an all-fiber device, based on AFL Telecommunications’ fused biconic technology, and is designed and manufactured to meet Military and Telcordia requirements.
applications• Telecommunications
• CATV
• LAN
• Monitoring of Networks
Single-mode Standard Grade Specifications (max. insertion loss and max. PDL)
RatioSpecifications (dB)
Primary/Secondary Port PDL (dB)
50/50 3.7/3.7 0.17
55/45 3.3/4.2 0.17
60/40 2.5/5.6 0.15
65/35 2.3/5.8 0.15
67/33 2.1/6.2 0.13
75/25 1.8/7.2 0.13
80/20 1.5/8.2 0.10
85/15 1.4/10.0 0.10
90/10 1.0/12.0 0.10
95/5 0.7/16.0 0.10
specificationsStandard and Premium Grades
Parameter Value
Operating Wavelength 1310 nm + 50 and 1550 nm + 50
Return Loss 55 dB
Directivity 55 dB
Package Dimension 3.2 mm(dia.) x 55 mm(L)
Operating Temperature -40° to +85°C
Storage Temperature -40° to +85°C
Single-mode Premium Grade Specifications (max. insertion loss and max. PDL)
RatioSpecifications (dB)
Primary/Secondary Port PDL (dB)
50/50 3.6/3.6 0.15
55/45 3.2/4.1 0.15
60/40 2.7/4.7 0.14
65/35 2.3/5.3 0.14
67/33 2.2/5.7 0.14
70/30 2.0/6.0 0.13
75/25 1.8/6.8 0.13
80/20 1.3/7.8 0.10
85/15 1.0/9.2 0.10
90/10 0.8/11.2 0.10
95/5 0.5/14.4 0.10
393939
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.17.04
optical connectivity
Wideband Couplers
ordering information
Description Part Number
1310/1510 (Premium) 1310/1510 (Standard)
50/50 C198364-P C198364
45/55 C198358-P C198358
40/60 C198353-P C198353
35/65 C198349-P C198349
33/66 C198904-P C198904
30/70 C198346-P C198346
25/75 C198340-P C198340
20/80 C198335-P C198335
15/85 C198331-P C198331
10/90 C198328-P C198328
5/95 C198322-P C198322
404040
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
Parameter Value
Operating Wavelength (nm) 1544–1565 1270–1360 and 1510–1590
Coupling Ratio 1% 3% 5% 10% 1% 3% 5% 10%
Grade AA A
Insertion Loss - Through Port (dB) 0.25 0.4 0.55 0.66 0.2 0.3 0.4 0.7
Insertion Loss - Cross / Tap Port (dB) 23 16 14 11.1 23.1 17 14.5 11.1
PDL Through Port (dB) 0.1 0.1 0.1 0.05 0.1 0.1 0.1 0.1
PDL Cross Port (dB) 0.2 0.2 0.2 0.1 0.1 0.1 0.1 0.1
Return Loss (minimum) (dB) 45 50
Directivity (minimum) (dB) 50 55
Fiber Type Single-mode
Fiber Length (meters) 1
Package Dimensions (mm) 3.2 x 65
Operating Temperature (ºC) -20 to +85
Storage Temperature (ºC) -40 to +85
tap couplers
The tap coupler is a compact, low-loss fused tapered component that provides a means for branching out transmission signals. The tap coupler, available in ratios of 1%, 3%, 5%, 10%, and custom splits, is designed and manufactured to meet Military and Telcordia requirements.
Tap Couplers
features• Low insertion loss over entire bandwidth and temperature (typical IL change <±0.1 dB)
• Ultra-low PDL and temperature sensitivity
• High directivity
• Compact design
• Environmentally stable, over 10 years of proven field reliability
• Standard operating temperature range -4O°C to +85°C
• Fully tested to Telcordia 1209 and 1221 criteria
applications• Optical Amplifiers
• CATV
• Optical Network Monitoring
• LAN and WAN
• Fiber Optic Gyros
ordering information (premium)
Configuration
1 = 1 x 2
2 = 2 x 2
A = Premium
AA = Custom
T A P C –
Tap Ratio
01 = 1%
03 = 3%
05 = 5%
10 = 10%
414141
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
Wavelength Division Multiplexer Couplers
The WDM separates or combines wavelengths in the 1310 and 1550nm bands over an ultra-wide bandwidth (+ 20nm) and temperature range while maintaining excellent stability and optical performance. The device, which is fabricated using an advanced fused biconi-cal taper technology, is designed to meet Telcordia 1209 and 1221 requirements.
features• Low insertion loss
• Ultra-wide bandwidth
• Wide operating temperature
• Low PDL
• Highly stable and reliable
• Epoxy-free optical path
applications• Telecommunications
• CATV
• Fiber Optic Sensors and Instruments
• Subscriber Loops
• Military Systems, Fiber Optic Gyros
• FTTH
specifications (single-mode premium)
ParameterModel Number
S004794
Configuration 1 x 2
Wavelength 1310 / 1550nm
Directivity <-65dB
Operating Temperature -40º to +85ºC
Typical Temperature Stability <0.1dB
Typical Polarization Stability (passband) <0.1dB
Isolation 20dB
*Isolation of 32dB and higher not available in 63mm L or 69mm L x 3mm OD
424242
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
features• Telcordia qualified components and
connectors
• Low loss
• Low uniformity
• Available in LGX, RU and custom designs
Optical ModulesAFL Telecommunications offers coupler modules for the management of optical power and wavelength. The modules are comprised of Telcordia-compliant PLC or concatenated fused biconic components and, once assembled and terminated, are fully tested for environmen-tal, mechanical and optical integrity. All optical coupler modules are designed to customer specifications and are available in a variety of package platforms, including ruggedized, LGX®, RU (19” or 23”) and custom designs.
applications• CATV
• Telco
• Wide Area Networks
• Fiber Monitoring Systems
• Military systems
• Standard and custom ratios
• Rugged construction to ensure environmental, mechanical and optical integrity
• Termination options include SC, ST®, FC and LC
custom ordering guide
Note: Dynamic field expands to accommodate 1XN configurations LGX® is a registered trademark of Lucent Technologies®
Output Connector/AdapterASC = Angle SC
AFC = Angle FC
USC = Ultra SC
UFC = Ultra FC
SST = Super ST
ULC = Ultra LC
000 = Non-connectorized
Output PigtailLength (M)01 = 1 meter
00 = Adapter
Input Connector/AdapterASC = Angle SC
AFC = Angle FC
USC = Ultra SC
UFC = Ultra FC
SST = Super ST
ULC = Ultra LC
000 = Non-connectorized
Configuration A = Input Rear Adapter Output Front Pigtail/Jumper
C = Input Rear Adapter Output Front Adapter
D = Input Front Pigtail/Jumper Output Front Adapter
E = Input Front Pigtail/Jumper Output Front Pigtail/Jumper
F = Input Front Adapter Output Front Adapter
G = Input Front Adapter Output Front Pigtail/Jumper
Input PigtailLength (M)01 = 1 meter
00 = Adapter
Input/OutputPorts 0102 = 1 x 2
0103 = 1 x 3
0104 = 1 x 4
0105 = 1 x 5
0106 = 1 x 6
0108 = 1 x 8
0110 = 1 x 10
Coupling Ratio(First Character)
50 = 50%
45 = 45%
40 = 40%
35 = 35%
33 = 33%
30 = 30%
25 = 25%
20 = 20%
15 = 15%
10 = 10%
5 = 5%
WDM(Second Character)
00 = WDM
(Third Character)
20 = Isolation
40 = Isolation
Package Type(First Character)
C = LGX® Compatible
D = 19” Rack Mountable
Package Color (Second Character)
W = CO White
434343
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
03.03.04
optical connectivity
features• Dual window wideband operation
• Low insertion loss
• Low PDL
• High Directivity
• Long term field application
• Environmentally stable over -40C to +85C
Ruggedized Wideband Couplers
Enhancing AFL Telecommunications’ wideband coupler offering are two package styles for ruggedized versions of these reliable, standardized couplers. 3mm and 900um furcated pigtail options and a variety of connector styles are offered in both single-mode and multimode applications. All AFL Telecommunications’ couplers conform to stringent environmental and mechanical standards to provide high reliablity in a variety of customer applications.
ordering information
applications• Telecommunications
• CATV
• LAN
• Fiber in the Loop
• Network monitoring
Output Connector/AdapterASC = Angle SC
AFC = Angle FC
USC = Ultra SC
UFC = Ultra FC
SST = Super ST
ULC = Ultra LC
000 = Non-connectorized
Output PigtailLength (M)(Examples)
01 = 1 meter
02 = 2 meters
Input ConnectorOptionsASC = Angle SC
AFC = Angle FC
USC = Ultra SC
UFC = Ultra FC
SST = Super ST
ULC = Ultra LC
000 = Non-connectorized
Configuration S = Single-mode
M = Multimode
Input PigtailLength (M)(Examples)
01 = 1 meter
02 = 2 metersOutput Leads0102 = 1 x 2
Split Ratio50 = 50/50%
45 = 45/55%
40 = 40/60%
35 = 35/65%
30 = 30/70%
25 = 25/75%
20 = 20/80%
15 = 15/85%
10 = 10/90%
5 = 5/95%
Package TypeT = 900µm Diameter Leads
3 = 3mm Diameter Leads
454545
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
Index
68290-XXXX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2769301-XXXX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27698-DSC-XXXX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2792910 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2692910-C5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2692910-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2692910-R-C5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2692915-R-HS-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2692915-T-AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2692915-T-DD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2693802-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2693802-500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2693902-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2693902-500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2693903-100-AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2693903-500-AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Adapter Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Advanced Fiber Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . 17AFA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Attenuated Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Buildout Style Attenuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C002401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C002453 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C002499 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C002507 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C002766 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C004127 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C004133 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C006037 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C006907-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C006913-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C007930 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30C007976 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30C008812 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36C015296 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C015407 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C015687 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C015830 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C015849 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C024392 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
DESCRIPTION PAGEC028851 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C032980 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C033022 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C033030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C033235 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C036684 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36C036692 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36C038733 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C057010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C057037 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C058475 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C066443 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30C067393 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33C067407 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33C078700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C080810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C082562 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33C087734 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C092258 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C092266 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C094862 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C094994 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30C095257 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C096210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C096261 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C096377 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30C097268 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C116004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C130082 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C143346 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30C143680 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30C145357 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30C146558 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30C146566 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30C147880 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C148828 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33C159013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25C178298 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C178670 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25C180691 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
DESCRIPTION PAGE
464646
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
Index
DESCRIPTION PAGE DESCRIPTION PAGEC181310 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C182120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37C182635 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34C185774 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25C186363 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C189818 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35C189826 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35C189834 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35C189842 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35C193114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35C193122 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35C194404 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36C196855 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30C197098 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C197878 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C197881 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C197885 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C197890 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C197899 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C197903 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C197914 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C198322 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198322-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198328 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198328-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198331 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198331-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198335 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198335-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198340 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198340-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198346 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198346-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198349 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198349-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198353 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198353-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198358 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198358-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198364 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
C198364-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198904 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C198904-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39C200938 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C200941 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C200945 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C200950 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C200956 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C200959 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C200963 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C200968 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C200974 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C200977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C200981 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C200986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201017 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201022 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201031 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201035 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201946 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201949 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201953 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C201958 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C203303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C203308 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C203314 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C203317 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C203321 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C203326 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C203332 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C203335 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C203956 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C209081 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C209176 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29C209383 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C209560 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
474747
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
DESCRIPTION PAGE DESCRIPTION PAGE
Index
C209563 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28C222113 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C222118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C222124 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31C222127 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Circular Premise Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . 12Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Cletop Ferrule Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Connector / Adapter Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . 37Connectorized Jacketed Ribbon Assembly . . . . . . . . . . . . . . . . . 11CPC Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Crimp Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34CS000091 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31CS000092 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31CS000093 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31CS000094 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31CS000135 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36CS000136 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36CS000308 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000309 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000310 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000316 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000317 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000318 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000319 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000320 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000321 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000322 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000323 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000337 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34CS000338 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CS000446 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Dual-Link Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Duplex Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7FC Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30FC Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4FC Optical Terminators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Fiber Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Fiber Receiver Service Cable . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Field Master™ Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 34FM000065 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34FM000413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34FM000426 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34FPF1-00-0001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34FRSC Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Hermetic Fiber Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hybrid Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Indoor / Outdoor Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . 13LC Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29LC Cable Assemblies - Simplex . . . . . . . . . . . . . . . . . . . . . . . . . . 5LC Field Master™ Connectors . . . . . . . . . . . . . . . . . . . . . . . . . 24Lensed Fiber Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18LightLink™ Fiber Receiver Service Cable . . . . . . . . . . . . . . . . . 15Loopback Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Loose Tube Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . 13Loose Tube Fanout Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35MTP® Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29MTP® Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10MT-RJ Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30MT-RJ Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7MU Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Optical Data Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Optical Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Outside Plant Loose Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Plastic Optical Fiber Data Link System . . . . . . . . . . . . . . . . . . . . 26PM Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Polarization Maintaining Assemblies . . . . . . . . . . . . . . . . . . . . . 21Precision Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Preterminated Indoor / Outdoor Cable Assemblies . . . . . . . . . . . 13Quad Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Riser Rated Loose Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Ruggedized Wideband Couplers . . . . . . . . . . . . . . . . . . . . . . . . 43SC Adapter Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28SC Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28SC Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4SC Field Master™ Connectors . . . . . . . . . . . . . . . . . . . . . . . . . 24SC Optical Terminators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Simplex Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4ST Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
484848
www.AFLtele.com or 1.800.235.3423 Specifications are subject to change without notice. © 2002, AFL Telecommunications. All rights reserved.
9.01.04
optical connectivity
ST Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4ST Field Master™ Connectors . . . . . . . . . . . . . . . . . . . . . . . . . 24Tap Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Wavelength Division Multiplexer Couplers . . . . . . . . . . . . . . . . . 41WBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38WDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Wideband Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Zipcord Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Index
DESCRIPTION PAGE