7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 1/499
Oracle EBS R12 InventoryCreated on Thursday, June 26, 2008
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 2/499
COPYRIGHT & TRADEMARKS
Copyright © 2003, 2007, Oracle. All rights reserved. Powered by OnDemand Software.
Distributed by Oracle under license from Global Knowledge Software LLC. © 1998-2007. All
rights reserved.
The information contained in this document is subject to change without notice. If you find any
problems in the documentation, please report them to us in writing. This document is not
warranted to be error-free. Except as may be expressly permitted in your license agreement for
these Programs, no part of these Programs may be reproduced or transmitted in any form or byany means, electronic or mechanical, for any purpose.
If this documentation is delivered to the United States Government or anyone using the
documentation on behalf of the United States Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTS
The U.S. Government’s rights to use, modify, reproduce, release, perform, display, or disclose
these training materials are restricted by the terms of the applicable Oracle license agreement
and/or the applicable U.S. Government contract.
Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of Oracle Corporation
and/or its affiliates. Other names may be trademarks of their respective owners.
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 3/499
Training GuideOracle EBS R12 Inventory
Table of ContentsIntroduction .......................................................................................................................vi
Inventory Setup .................................................................................................................. 1Defining Stock Locators .......................................................................................................... ...1
Defining Shortage Parameters ..................................................................................... ..... ..... .....7Defining Shipping Methods ..................................................................................................... .12
Defining Organization Access ............................................................................................... ...14
Defining Interorganization Shipping Networks ...................................................... ..... ..... ..... ...18Defining Subinventories ....................................................................................................... ....25
Item Setup and Control ...................................................................................................34Defining Picking Rules .............................................................................................................34
Defining Item Templates .............................................................................................. ..... ..... ..48
Defining Item Status Codes ..................................................................................................... .57
Defining Item Catalog Groups ..................................................................................................61
Defining Customer Items ..........................................................................................................65Defining Customer Item Cross References ...............................................................................69
Defining Cross Reference Types ...................................................................................... ..... ...73Defining Commodity Codes ............................................................................................ ..... ....76
Defining Category Sets .............................................................................................................78Defining Categories .......................................................................................................... ..... ...81
Defining and Viewing Pending Statuses ...................................................................................85
Copying Item Templates ...........................................................................................................90
Assigning Items to Categories ..................................................................................... ..... ..... ...95
Assigning Cross Reference Types ............................................................................... ..... ..... .100
Specifying Recommended Categories ............................................................... ..... ..... ..... ..... .103
Defining and Maintaining Item Information .............................................................. 110Updating Organization Level Items ............................................................................... ..... ....110
Defining Manufacturer Part Numbers .....................................................................................117
Defining Items .................................................................................................................... ....121Defining Item Transaction Defaults ........................................................................................126
Defining Item Revisions ............................................................................................... ..... .....129
Defining Item Relationships ...................................................................................................134
Assigning Subinventories to an Item ......................................................................... ..... ..... ...140
Assigning Items to Organizations ......................................................................................... ..147
Assigning Items to Catalogs ......................................................................................... ..... .....151
Assigning Items to a Subinventory .........................................................................................156
Viewing Item Information ............................................................................................... ..... ..160
Lot Control .....................................................................................................................164Updating Lot Information .......................................................................................................164
Setting Up Lot Control ....................................................................................... ..... ..... ..... .....167
Displaying Lot Information ..................................................................................... ..... ..... .....176Defining Lot Action Codes .....................................................................................................179
Creating a New Lot .................................................................................................................181
Assigning Lot Numbers Within Transactions ....................................................................... ..185
Viewing Lot Genealogy ..........................................................................................................190
Serial Control .................................................................................................................196Setting Up Serial Number Control ....................................................................................... ...196
Maintaining Serial Number Information .................................................................................203
Generating Serial Numbers .................................................................................................. ...206
Page iii
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 4/499
Training GuideOracle EBS R12 Inventory
Assigning Serial Numbers ........................................................................................... ..... ..... .209
Viewing Serial Number Genealogy ................................................................................ ..... ...216
Material Status Control ................................................................................................. 221Setting Up Material Status Control .........................................................................................221
Transaction Setup .......................................................................................................... 227
Defining Consumption Transaction Rules ................................................................... ..... ..... .227Defining Account Aliases .......................................................................................................231
Defining Transaction Types ................................................................................................... .234
Defining Transaction Reasons ..................................................................................... ..... ..... .237
Transactions ................................................................................................................... 241Viewing Potential Shortages ...................................................................................................241
Viewing Pending Transactions ....................................................................................... ..... ...247
Viewing Material Transactions ......................................................................................... ..... .251
Transferring Directly Between Organizations ................................................... ..... ..... ..... ..... .259
Transferring Consigned and VMI Material .............................................................................265
Transferring Between Subinventories ................................................................................ .....269Transferring Between Organizations Using Intransit Processes ..............................................273
Performing Planning Transfer Transactions ................................................................ ..... ..... .277Performing Miscellaneous Transactions .......................................................................... ..... ..281
Viewing Transaction Summaries ......................................................................................... ...285
On Hand and Availability ............................................................................................. 292Viewing On-Hand Quantities ............................................................................. ..... ..... ..... .....292
Viewing Item Supply and Demand Information ..................................................... ..... ..... ..... .297Viewing Item Availability ............................................................................................... ..... ..300
Viewing Attribute Information ....................................................................................... ..... ...303
Updating a Grade ....................................................................................................................309
Performing a Status Update ........................................................................................... ..... ....316
Performing a Mass Move ........................................................................................................321
Performing a Mass Issue .........................................................................................................328
Creating Reservations .............................................................................................................333Viewing Status Information ....................................................................................................336
Move Orders ...................................................................................................................341Defining Pick Slip Grouping Rules ............................................................... ..... ..... ..... ..... .....341
Allocating and Transacting Move Orders .................................................................... ..... ..... .343Generating Move Order Requisitions ............................................................................ ..... ....350
Planning and Replenishment ........................................................................................ 361Replenishing Kanban Cards ................................................................................................... .361
Purging Replenishment Counts ...............................................................................................364
Printing Kanban Cards .......................................................................................................... ..367
Generating Kanban Cards .......................................................................................................370
Entering and Reloading Item Safety Stocks ........................................................................ ....373
Entering and Processing Replenishment Counts .....................................................................377Defining Kanban Pull Sequences ............................................................................................382
Defining Kanban Cards ....................................................................................... ..... ..... ..... ....388
Summarizing Demand Detail ................................................................................................. .394
Cost Accounting and Control ....................................................................................... 398Maintaining Accounting Periods ............................................................................... ..... ..... ...398
ABC Analysis ..................................................................................................................401Purging ABC Information ........................................................................................ ..... ..... ....401
Page iv
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 5/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 6/499
Training GuideOracle EBS R12 Inventory
IntroductionOracle Inventory is a global repository for part number data and on hand balances. Oracle
Inventory is member of the Supply Chain product family which streamlines operations within
procure to pay, order to cash, logistics and reverse logistics (including returns, repairs and
maintenance) processes. Oracle Inventory provides a single repository of inventory data for all business purposes including manufacturing, distribution, service, repair and spares, consigned
inventory (both from suppliers and to customers), vendor managed inventory, in transit inventory
and more. This eliminates the need to maintain inventory information across disparate systems.
Oracle Inventory uses the receipt to issue process to manage your inventory. When inventory
arrives in your warehouse you receive it. After you receive inventory, you can transfer it within
your organization or to another organization. Finally, you can issue material out of Oracle
Inventory.
Upon completion of this module, you will be able to:
• Create an item.
• Create and assign categories.• Process transactions.• Reserve material.
• View on-hand material.
• Process replenishment counts.
• Perform kanban processes.
• Maintain accounting periods.
• Perform ABC analysis.
• Define and perform a cycle count.
• Define and perform a physical inventory.
Page vi
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 7/499
Training GuideOracle EBS R12 Inventory
Inventory SetupIn this lesson, you will learn how to configure parts of Oracle Inventory that you use in day-to-
day operations.
Upon completion of this lesson, you will be able to:• Define subinventories.
• Define stock locators.
• Define organization access.
• Define shortage parameters.
• Define interorganization shipping networks.
• Define shipping methods.
Defining Stock Locators
You use locators to identify physical areas where you store inventory items. Locators may
represent rows, aisles, or bins in warehouses. You can track item quantities by locator andtransact items into and out of locators. You can restrict the life of locators as well as define
locator dimensions.
There are many different types of locators. Locators are segregated by their different uses.
Locators are used as packing stations, dock doors, receiving locations, storage locators,
consolidation locators, staging lanes, and inspection stations.
In this example, you will create a storage locator for a finished goods subinventory.
Procedure
Page 1
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 8/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Stock Locators page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Setup: Stock Locators link.
5
.
Use the Find Locators page to find existing locators and start the process to create
new locators.
Page 2
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 9/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
You use the Stock Locators page to define new locators. You enter the row, rack, and
bin information for the locator as well as the locator type, material status, and
subinventory with which the locator is associated.
Page 3
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 10/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Locator field.
9
.
You cannot use the same locator names within any two subinventories within the same
organization.
1
0.
Enter the desired information into the Locator field. Enter "S.1.1".
1
1
.
Click the Type list.
12
.
Locator types differentiate how locators are used within your organization.
Page 4
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 11/499
Training GuideOracle EBS R12 Inventory
Step Action
1
3
.
Click the Storage Locator list item.
1
4
.
The Status is the material status for this locator. Material status controls the enabled
transactions for all material that resides inside the locator.
Page 5
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 12/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Click in the Status field.
1
6
.
Enter the desired information into the Status field. Enter "Active".
1
7
.
This is the subinventory in which the locator resides.
1
8
.
Click in the Subinventory field.
1
9
.
Enter the desired information into the Subinventory field. Enter "FGI".
Page 6
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 13/499
Training GuideOracle EBS R12 Inventory
Step Action
2
0
.
Click the Save button.
2
1
.
You have completed the Defining Stock Locators procedure.
End of Procedure.
Defining Shortage Parameters
A material shortage occurs whenever unsatisfied demand exceeds available quantity for the
incoming supply of material. You can enable the system to send material shortage alerts and
notification whenever a material shortage occurs in an organization.
In this example, you will determine the WIP and Order Management shortage parameters for one
of your organizations.
Procedure
Page 7
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 14/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Shortage Parameters page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4.
Click the Setup: Shortage Parameters link.
5
.
You use the Shortage Parameters page to set shortage parameters for your
organization. You use the Work in Process tab to set the material shortage parametersfor work in process.
Page 8
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 15/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the Check Shortages option.
7.
When enabled, the system includes all jobs and schedules with the status Released,whose scheduled start date is overdue in the material shortage check.
8
.
Click the Released option.
9
.
This is the number of days after the start date until the job is included in the material
shortage check.
1
0
.
Click in the Released Jobs: Days Overdue field.
1
1
.
Enter the desired information into the Released Jobs: Days Overdue field. Enter "1".
1
2
.
When enabled, the system includes all jobs and schedules with the status Unreleased,
whose scheduled start date is overdue in the material shortage check.
1
3.
Click the Unreleased option.
1
4
.
This is the number of days after the start date until the job is included in the material
shortage check.
1
5
.
Click in the Unreleased Jobs: Days Overdue field.
16
.
Enter the desired information into the Unreleased Jobs: Days Overdue field. Enter "1".
1
7
.
When enabled, the system includes all discrete jobs with a current operation before an
operation that has assigned open material requirements in the material shortage check.
Page 9
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 16/499
Training GuideOracle EBS R12 Inventory
Step Action
1
8
.
Click the If operation before assigned operation is due option.
1
9
.
Click the Released option.
2
0
.
Click in the Released Schedules: Days Overdue field.
21
.
Enter the desired information into the Released Schedules: Days Overdue field. Enter "1".
2
2
.
Click the Unreleased option.
2
3
.
Click in the Unreleased Schedules: Days Overdue field.
2
4.
Enter the desired information into the Unreleased Schedules: Days Overdue field.
Enter "1".
2
5
.
When enabled, it includes all repetitive schedules with a current operation that has an
open material requirements in the material shortage check.
2
6
.
Click the If assigned operation is due option.
27
.
When enabled, excludes all components with the supply type Bulk from the materialshortage check.
2
8
.
Click the Bulk Components option.
Page 10
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 17/499
Training GuideOracle EBS R12 Inventory
Step Action
2
9
.
When enabled, excludes vendor-supplied components from the material shortage
check.
3
0
.
Click the Supplier Components option.
3
1
.
Click the Component Planner option.
32
.
Click the Assembly Planner option.
3
3
.
Click the Component Buyer option.
3
4
.
Click the Job/Schedule Creator option.
3
5.
Click the Order Entry tab.
3
6
.
When enabled, checks shortages for sales orders. A sales order is considered overdue
when the pick wave move order is unfulfilled.
3
7
.
Click the Check Shortages option.
38
.
Click the Item planner option.
3
9
.
Click the Order creator option.
Page 11
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 18/499
Training GuideOracle EBS R12 Inventory
Step Action
4
0
.
Click the Save button.
4
1
.
You have completed the Define Shortage Parameters procedure.
End of Procedure.
Defining Shipping Methods
Shipping methods are the way you ship material. When you create a shipping method, you must
enable it before you can use it in a shipping network.
In this example, you will define the shipping method DHL for your organization.
Procedure
Page 12
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 19/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Application Utilities SHIP_METHODS page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Setup: Shipping Methods link.
5
.
You use the Applications Utilities: SHIP_METHOD Lookups page to determine the
short codes that you use for shipping.
Step Action
6
.
Click the New button.
Page 13
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 20/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
This is alphanumeric decode that describes the shipping method. The system uses this
code in the list of values for the shipping method field in the Inter-org Shipping
Methods window. You cannot change the value in this field after you save it. To
remove an obsolete code you must disable code, enter and end date, or change the
meaning and description to match a replacement code.
8
.
Click in the Code field.
9
.
Enter the desired information into the Code field. Enter "000001_DHL".
1
0.
Click in the Lookup Code Meaning field.
1
1
.
Enter the desired information into the Lookup Code Meaning field. Enter "DHL
Shipping".
1
2
.
Click in the Lookup Code Description field.
1
3
.
Enter the desired information into the Lookup Code Description field. Enter "DHL
Shipping".
1
4
.
Click the Save button.
1
5
.
You have completed the Defining Shipping Methods procedure.
End of Procedure.
Defining Organization Access
You can specify which organizations a responsibility can access by mapping responsibilities to
organizations. Once you set up this mapping, a user logging in to an Oracle Manufacturing
product is restricted to the organizations mapped to the selected responsibility. The change
organization responsibility window is also restricted.
In this example, we will restrict an organization to the Oracle Inventory responsibility.
Page 14
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 21/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Organization Access page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Setup: Organization Access link.
Page 15
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 22/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Use the Organization Access page to assign an organization to a responsibility. Until
you assign organization access to a responsibility, all responsibilities have access to all
organizations. Once you restrict any responsibility to an organization, you must then
explicitly define the organizations to which all responsibilities can access.
Organization access does not restrict access to functions that cross multiple
organizations such as ATP, interorganization transfers, and item search. Users can still
specify any valid organization when running these functions. System administrators
determine which responsibilities a user can access when they establish system security.
if there are no restrictions entered for an organization, then it can be accessed by allresponsibilities.
Step Action
6.
Click the New button.
7
.
This is the Organization to which you want to restrict access.
Page 16
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 23/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Org field.
9.
Enter the desired information into the Org field. Enter "W4".
1
0
.
This is the application assigned to the responsibility when it was defined.
1
1
.
Click in the Application field.
12
.
Enter the desired information into the Application field. Enter "Oracle Inventory".
1
3
.
Click in the Application field.
1
4
.
Enter the desired information into the Application field. Enter "Inventory".
15
.
Enter the desired information into the Name field. Enter "Oracle Inventory".
1
6
.
Click in the Comments field.
1
7
.
Enter the desired information into the Comments field. Enter "Restrict to Oracle
Inventory responsibility".
1
8
.
Click the Save button.
Page 17
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 24/499
Training GuideOracle EBS R12 Inventory
Step Action
1
9
.
You have completed the Defining Organization Access procedure.
End of Procedure.
Defining Interorganization Shipping Networks
An Interorganization Shipping Network describes the relationships and accounting information
between a shipping organization and a destination organization.
In this example, you will set up an intransit transfer type for your organization.
Procedure
Step Action
1
.
Begin by navigating to the Shipping Networks page.
Click the vertical scrollbar.
Page 18
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 25/499
Training GuideOracle EBS R12 Inventory
Step Action
2
.
Click the Inventory link.
3.
Click the vertical scrollbar.
4
.
Click the Setup: Shipping Networks link.
5
.
Use the Shipping Networks page to define a shipping network between two
organizations. You must define a shipping network between two organizations before
you can transfer material between organizations. When you setup a shipping network,
you must select a transfer type, direct or intransit.If you choose intransit, the system moves material to an intermediary state before it
reaches the destination organization, and a receipt transaction is required at the
destination organization. If you choose direct, the system moves the material directly
to the destination organization and you are not required to perform a receipt
transaction.
Page 19
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 26/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the From field.
7.
Enter the desired information into the From field. Enter "M7".
8
.
Click in the To field.
9
.
Enter the desired information into the To field. Enter "M1".
1
0
.
Click the Transfer Type list.
1
1
.
If you select Intransit, then the system performs an intermediary move first. If you
choose this type of transfer, then you can track the inventory until it arrives at the
destination organization.
Page 20
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 27/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click the Intransit list item.
Step Action
1
3
.
Click the Open button.
or
Press [Alt+O].1
4
.
You use the Shipping Network page to determine additional information between the
organizations.
Page 21
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 28/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
This is the Transfer Credit account used to collect transfer charges for the shipping
organization. The system automatically uses the default value you defined in the
Organization Parameters page, or you can modify it if you choose.
Step Action
1
6
.
Click in the Transfer Credit field.
1
7
.
This is the purchase price variance for interorganization receipts in to standard cost
organizations. You must enter an account if your receiving organization is using
standard costing. The default value is the value you defined in the Organization
Parameters page. You can modify it if necessary.
1
8
.
Click in the Purchase Price Variance field.
Page 22
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 29/499
Training GuideOracle EBS R12 Inventory
Step Action
1
9
.
This is the general ledger receivables account used as an interorganization clearing
account for the shipping organization. The interorganization receivable account for the
shipping organization and the interorganization payables account for the receiving
organization should equal the interorganization payables account for the receiving
organization. the default value is the value you defined in the Organization
Parameters page.
2
0
.
Click in the Receivable field.
2
1.
This is the general ledger payables account used as an interorganization clearing
account for the receiving organization. The default value is the value you defined in the
Organization Parameters page.
2
2
.
Click in the Payable field.
2
3
.
This is the general ledger account used to hold the intransit inventory value. The
default value is the value you defined in the Organization Parameters page.
2
4
.
Click in the Intransit Inventory field.
2
5
.
Click the Tools menu.
or
Press [Alt+T].
2
6
.
Click the Shipping Methods menu.
27
.
This is the method you use to ship from the shipping organization to the destinationorganization
Page 23
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 30/499
Training GuideOracle EBS R12 Inventory
Step Action
2
8
.
Click in the Shipping Method field.
2
9
.
Enter the desired information into the Shipping Method field. Enter "DHL".
3
0
.
Click in the Intransit Time field.
3
1
.
Enter the desired information into the Intransit Time field. Enter "1".
3
2
.
Click in the Daily Capacity field.
Page 24
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 31/499
Training GuideOracle EBS R12 Inventory
Step Action
3
3
.
Enter the desired information into the Daily Capacity field. Enter "1000".
3
4
.
Click in the UOM field.
3
5
.
Enter the desired information into the UOM field. Enter "KM2".
36
.
Click in the Cost Per Unit field.
3
7
.
Enter the desired information into the Cost Per Unit field. Enter ".50".
3
8
.
Click in the Currency field.
3
9.
Enter the desired information into the Currency field. Enter "USD".
4
0
.
Click the Save button.
4
1
.
You have completed the Defining Interorganization Shipping Networks procedure.
End of Procedure.
Defining Subinventories
Subinventories are unique physical or logical separations of material inventory such as raw
inventory, finished goods or defective material. All material within an organization must reside in
a subinventory. Consequently, you must define one subinventory for each of your organizations.
When you perform transactions, you transact material in and out of subinventories.
Page 25
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 32/499
Training GuideOracle EBS R12 Inventory
In this example, you will create a subinventory to hold finished good items for your organization.
You can reserve material in the subinventory, and the subinventory is under locator control.
Procedure
Step Action
1
.
Begin by navigating to the Subinventories Summary page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Setup: Subinventories link.
Page 26
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 33/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Use the Subinventories Summary page to view existing subinventories and create
new subinventories.
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
You use the Subinventories page to create new subinventories. You enter information
about the subinventory.
Page 27
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 34/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Name field.
9
.
Enter the desired information into the Name field. Enter "Fingood".
1
0.
Click in the Description field.
1
1
.
Enter the desired information into the Description field. Enter "Finished Goods
Subinventory".
12
.
You can select a Locator Control option only if you selected Determined atSubinventory Level in the Organization Parameters window. You can update this
option only if there is no on-hand quantity for the subinventory.
1
3
.
Click the Locator Control list.
Page 28
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 35/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
If you select Prespecified for the subinventory, then you must enter a valid locator for
each item that resides in this subinventory.
Step Action
1
5
.
Click the Prespecified list item.
1
6
.
If you select this parameter, you must create locator aliases for all locators within this
subinventory.
Page 29
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 36/499
Training GuideOracle EBS R12 Inventory
Step Action
1
7
.
Click the Enable Locator Alias option.
1
8
.
You select the replenishment source for the subinventory from the Type list.
When you click Subinventory, the subinventory is replenished internally from another
subinventory within the same organization.
1
9
.
Click the Type list.
Page 30
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 37/499
Training GuideOracle EBS R12 Inventory
Step Action
2
0
.
Click the Subinventory list item.
2
1
.
The Picking UOM is used by the Oracle Warehouse Management Rules engine to
divide picks across subinventories in the warehouse.
Page 31
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 38/499
Training GuideOracle EBS R12 Inventory
Step Action
2
2
.
Click in the Picking UOM field.
2
3
.
Enter the desired information into the Picking UOM field. Enter "BOX".
2
4
.
The Pre-processing, Processing and Post-Processing lead times are used by min-max
planning are used when you perform min-max planning at the subinventory level.
2
5
.
Click in the Pre-Processing field.
2
6
.
Enter the desired information into the Pre-Processing field. Enter "1".
Page 32
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 39/499
Training GuideOracle EBS R12 Inventory
Step Action
2
7
.
Click in the Processing field.
2
8
.
Enter the desired information into the Processing field. Enter "2".
2
9
.
Click in the Post-Processing field.
30
.
Enter the desired information into the Post-Processing field. Enter "1".
3
1
.
Click the Save button.
3
2
.
You have completed the Defining Subinventories procedure.
End of Procedure.
Page 33
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 40/499
Training GuideOracle EBS R12 Inventory
Item Setup and ControlItem Setup and Control helps you determine the control parameters for items.
Upon completion of this lesson, you will be able to:
• Define item status codes.• Define and view pending statuses.
• Define picking rules.
• Define item templates.
• Copy item templates.
• Define cross-reference types.
• Assign cross-reference types.
• Define commodity codes.
• Define customer items.
• Define customer item cross references.• Define categories.
• Define category sets.
• Assign items to categories.• Specify recommended categories.• Define item catalog groups.
Defining Picking Rules
You create picking rules that enable you to sort picks based on criteria that you define for sales
orders, process manufacturing batches or work in process jobs.
After you create a picking you, use the Rules Workbench to assign the rule to an item.
For example, when you book a sales order you would like to pick an item from a particular subinventory. You can create an inventory picking rule to do this.
Procedure
Page 34
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 41/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Inventory Picking Rules page.
Click the vertical scrollbar.
2
.
Click the Inventory, Vision Operations (USA) link.
3
.
Click the vertical scrollbar.
4
.
Click the Rules: Picking link.
5
.
Use the Inventory Picking Rules page to create inventory picking rules. On this page
you set the picking parameters for the rules.
Page 35
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 42/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Name field.
7
.
Enter the desired information into the Name field. Enter "Subinventory Pick ".
8
.
Click in the Description field.
9
.
Enter the desired information into the Description field. Enter "Sales Order
Subinventory Picking Rules".
1
0
.
Click the Applicable To list.
Page 36
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 43/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Click the Sales Order list item.
Page 37
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 44/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click the Subinventory list.
Page 38
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 45/499
Training GuideOracle EBS R12 Inventory
Step Action
1
3
.
Click the SUBINVENTORY ASC list item.
Page 39
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 46/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Click the Subinventory Sort Rank list.
Page 40
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 47/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Click the 1 list item.
Page 41
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 48/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Click the Locator list.
Page 42
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 49/499
Training GuideOracle EBS R12 Inventory
Step Action
1
7
.
Click the LOCATOR ASC list item.
Page 43
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 50/499
Training GuideOracle EBS R12 Inventory
Step Action
1
8
.
Click the Locator Sort Rank list.
Page 44
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 51/499
Training GuideOracle EBS R12 Inventory
Step Action
1
9
.
Click the 2 list item.
Page 45
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 52/499
Training GuideOracle EBS R12 Inventory
Step Action
2
0
.
Click the Save button.
2
1
.
Click the Assignment button.
or
Press [Alt+A].
2
2
.
Use the Rules Workbench page to assign your picking rule. The rule that you created
on the Inventory Picking Rules page appears on the Rules Workbench page. The
system automatically assigns a sequence number and return type to the rule. You can
modify the sequence number, but you cannot modify the return type. You can assign
your rule to any combination of criteria the Rules Workbench page displays.
For example, if you create a picking rule that allocates material by lot number in
ascending order followed by locator in ascending order, you can assign it to an item on
the Rules Workbench page. This means for picking, the system allocates the lowest
lot number of the item in the lowest locator number where the item resides.
Page 46
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 53/499
Training GuideOracle EBS R12 Inventory
Step Action
2
3
.
Click in the Item field.
2
4
.
Enter the desired information into the Item field. Enter "AS18947".
2
5
.
You must enable a rule before you can use it. You must also disable a rule before you
can modify it.
2
6
.
Click the Enabled option.
2
7
.
Click the Save button.
Page 47
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 54/499
Training GuideOracle EBS R12 Inventory
Step Action
2
8
.
You have completed the Defining Picking Rules procedure.
End of Procedure.
Defining Item Templates
An Item template is a defined set of attribute values. When you apply a template to an item you
overlay a set of values to the item definition. You can apply the same or different templates to an
item multiple times. The more recent attribute values override previous values unless the previous
value is not updateable.
An item template does not update the value of status attributes when the values conflict. For
example, if an item is transactional and stockable, a template cannot change Transactable to Yes
and leave Stockable to no.
Consider this scenario: you are a product manager for an ice cream manufacturer. Your company
operates in a process manufacturing environment. You need to create an item template that
automatically defaults item attributes that you typically use in your process manufacturing
environment.
Procedure
Page 48
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 55/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Item Templates page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Items: Templates link.
5
.
Use the Find Item Templates page to search for existing item templates or you can
create new item templates.
Page 49
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 56/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
Use the Item Template page to define new item templates. You use item templates to
determine preset values for item attributes. You can then apply the item template when
you define an item on in the Master Item page.
Page 50
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 57/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Template field.
9
.
Enter the desired information into the Template field. Enter "Process_ice cream".
1
0.
Click in the Description field.
1
1
.
Enter the desired information into the Description field. Enter "Template for Ice
cream".
12
.
The Show list corresponds to the tabs on the Master Item page. You can choose toview all the All Groups, or limit the groups by individual tab.
1
3
.
Click the Show list.
Page 51
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 58/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4.
Click the Inventory list item.
1
5
.
This item attribute enables you to stock and transact items in Oracle Inventory. You
must enable this attribute if you want to enable the attributes: Stockable, Transactable,
BOM Allowed and Build in WIP.
Page 52
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 59/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Click in the Inventory Item Value field.
1
7
.
Enter the desired information into the Value field. Enter "Yes".
1
8
.
Click the Enabled option.
1
9
.
This item attribute enables you to stock the item. You can set this attribute only if you
enable the Item attributes Inventory Item and Transactable. You must set this attribute
if you want to transact an item.
2
0
.
Click in the Stockable Value field.
Page 53
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 60/499
Training GuideOracle EBS R12 Inventory
Step Action
2
1
.
Enter the desired information into the Value field. Enter "Yes".
2
2
.
Click the Enabled option.
2
3
.
This item attribute enables you to perform transaction on an item. You must set the
item attributes Inventory Item, and Stockable in order to set this attribute.
24
.
Click in the Transactable Value field.
2
5
.
Enter the desired information into the Value field. Enter "Yes".
2
6
.
Click the Enabled option.
2
7.
Click the vertical scrollbar.
2
8
.
This attribute enables you to create material reservations for the item. You can reserve
an item only when you have sufficient inventory.
2
9
.
Click in the Reservable Value field.
30
.
Enter the desired information into the Value field. Enter "Reservable".
3
1
.
Click the Enabled option.
Page 54
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 61/499
Training GuideOracle EBS R12 Inventory
Step Action
3
2
.
Click the Inventory list.
Step Action
3
3
.
Click the vertical scrollbar.
3
4
.
Click the Process Manufacturing list item.
Page 55
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 62/499
Training GuideOracle EBS R12 Inventory
Step Action
3
5
.
Click the Yes button.
or
Press [Alt+Y].
3
6.
This item attribute enables you to use the item in process manufacturing recipes or
formulas.
3
7
.
Click in the Recipe Enabled Value field.
38
.
Enter the desired information into the Value field. Enter "Yes".
3
9
.
Click the Enabled option.
Page 56
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 63/499
Training GuideOracle EBS R12 Inventory
Step Action
4
0
.
This attribute enables you to use Process Quality to inspect items.
4
1
.
Click in the Process Quality Enabled Value field.
4
2
.
Enter the desired information into the Value field. Enter "Yes".
43
.
Click the Enabled option.
4
4
.
This item attribute enables you to use the item in a production batch as an ingredient or
by-product.
4
5
.
Click in the Process Execution Enabled field.
4
6.
Enter the desired information into the Value field. Enter "Yes".
4
7
.
Click the Enabled option.
4
8
.
Click the Save button.
49
.
You have completed the Defining Item Templates procedure.End of Procedure.
Defining Item Status Codes
You use item statuses codes to set default values for certain status attributes.
Page 57
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 64/499
Training GuideOracle EBS R12 Inventory
Consider this scenario: You periodically make items that you do not want made available to
customers. You need an initial testing period where internal customers can order the items that
you make and verify that is ready for consumption.
Create a pre-production item status that enables you to automatically set the needed itemattributes.
Procedure
Step Action
1
.
Begin by navigating to the Item Status page..
Click the vertical scrollbar.
2
.
Click the vertical scrollbar.
3
.
Click the Inventory link.
Page 58
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 65/499
Training GuideOracle EBS R12 Inventory
Step Action
4
.
Click the vertical scrollbar.
5.
Click the Status Codes link.
6
.
Use the Item Status page to set status attributes that enable and disable the
functionality of an item over time. Each status attribute allows you to enable the item
for a particular use. For example, if you set the status attribute BOM Allowed, then
you can place an item on a bill of material.
Step Action
7.
Click in the Status field.
8
.
Enter the desired information into the Status field. Enter "Pre-Prod".
Page 59
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 66/499
Training GuideOracle EBS R12 Inventory
Step Action
9
.
Click in the Translated Status field.
10
.
Enter the desired information into the Translated Status field. Enter "Pre-ProductionItem Status".
1
1
.
Click in the Description field.
1
2.
Enter the desired information into the Description field. Enter "Pre-Production Item
Status".
1
3
.
This item attribute enables you to define a bill of material for an item, or to assign the
item as a component on a bill.
1
4
.
Click the BOM Allowed option.
1
5
.
You use this item attribute to indicate whether the item is built with a discrete job or
repetitive assembly in Oracle Work in Process.
1
6
.
Click the Build In WIP option.
1
7
.
If you enable this item attribute, you can place the item on an internal requisition.
1
8.
Click the Internal Orders Enabled option.
1
9
.
This check box enables you to use this item in a production batch as an ingredient,
product, or by-product.
Page 60
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 67/499
Training GuideOracle EBS R12 Inventory
Step Action
2
0
.
Click the Process Execution Enabled option.
2
1
.
You enable this check box to use this item in process manufacturing recipes or
formulas.
2
2
.
Click the Recipe Enabled option.
23
.
This attribute enables you to stock the item. You cannot set this attribute if you do notset the attribute Transactable.
2
4
.
Click the Stockable option.
2
5
.
Setting this item attribute enables you to transact the item. You cannot set this
attribute, if you do not set the attribute Stockable.
2
6.
Click the Transactable option.
2
7
.
Click the Save button.
2
8
.
You have completed the Defining Item Status Codes procedure.
End of Procedure.
Defining Item Catalog Groups
Item catalogs enable you to add descriptive information to items and to partition your Item
Master into groups of items that share common characteristics.
For example, an item catalog group called mug could have a descriptive element called material.
Possible values for material might be glass or ceramic.
Page 61
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 68/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Item Catalog Groups page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Catalog Groups link.
5
.
Use the Item Catalog Groups page to create a new item catalog.
Page 62
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 69/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New button.
7
.
Click in the Name field.
8
.
Enter the desired information into the Name field. Enter "Mugs".
9
.
Click the Details button.
or
Press [Alt+D].
1
0
.
Use the Item Catalog Group page to define any number of descriptive elements for an
item catalog group. You can also determine whether the descriptive element is required
at item definition, and whether the descriptive element value is included by default in
the item catalog description.
Page 63
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 70/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
This is the sequence the descriptive elements appear in the Master Item page when
you assign them to an item.
Step Action
1
2
.
Enter the desired information into the Seq field. Enter "1".
1
3
.
Click in the Name field.
1
4
.
Enter the desired information into the Name field. Enter "Ceramic".
Page 64
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 71/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Click in the Seq field.
1
6
.
Enter the desired information into the Seq field. Enter "2".
1
7
.
Click in the Name field.
18
.
Enter the desired information into the Name field. Enter "Glass".
1
9
.
Enter the desired information into the Seq field. Enter "3".
2
0
.
Click in the Name field.
2
1.
Enter the desired information into the Name field. Enter "Metal".
2
2
.
Click the Save button.
2
3
.
You have completed the Defining Item Catalog Groups procedure.
End of Procedure.
Defining Customer Items
You can define customer items in your system and assign the items a commodity code. You can
also assign the correct shipping container to the item. In addition, you can assign customer item
cross references to your customer item. This references the customer item number the item
number in your system.
Page 65
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 72/499
Training GuideOracle EBS R12 Inventory
In this example, we will define a finished good customer item and assign an appropriate shipping
container.
Procedure
Step Action
1
.
Begin by navigating to the Find Customer Items page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Customer Items link.
Page 66
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 73/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Use the Find Customer Items page to search for existing customer items and to enter
new customer items.
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
Use the Customer Items Summary page to enter new customer items. A customer
item is the number that a customer uses to define an item.
Page 67
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 74/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Customer Name field.
9
.
Enter the desired information into the Customer Name field. Enter "ABC
Telecommunications".
1
0.
Click in the Customer Item field.
1
1
.
Enter the desired information into the Customer Item field. Enter "ABC-1001".
12
.
You use commodity codes to classify customer items. In this example, we areassigning the commodity code Finished Good to item ABC-1001. This means that
customer item ABC-1001 is a finished good.
1
3
.
Click in the Code field.
Page 68
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 75/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Enter the desired information into the Code field. Enter "Finished Good".
1
5
.
Click the Container tab.
1
6
.
In the Master field you enter the default container you use to ship customer items.
17
.
Click in the Master field.
1
8
.
Enter the desired information into the Master field. Enter "Pallet".
1
9
.
Click the Save button.
2
0.
You have completed the Defining Customer Items procedure.
End of Procedure.
Defining Customer Item Cross References
You use the Customer Item Cross References window to define and update cross references
between your inventory items and the customer items defined in the Customer Items Summary
window.
In this example, you will cross reference a customer item with a finished good item in your system.
Procedure
Page 69
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 76/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Customer Item Cross References page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Customer Item Cross References link.
5
.
Use the Find Customer Item Cross References page to search for existing cross
references and to create new cross references.
Page 70
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 77/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New (B) button.
or
Press [Alt+B].
7
.
Use the Customer Item Cross References page to establish a cross reference between
a customer item and an inventory item number.
Page 71
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 78/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Customer Item field.
9
.
Enter the desired information into the Customer Item field. Enter "ABC-1001".
1
0.
Click in the Item field.
1
1
.
Enter the desired information into the Item field. Enter "AS18947".
12
.
You can define multiple cross references to a customer item. In these cases, you mustspecify the rank of the cross reference. The highest rank is 1.
1
3
.
Click in the Rank field.
Page 72
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 79/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Enter the desired information into the Rank field. Enter "2".
1
5
.
Click the Save button.
1
6.
You have completed the Defining Customer Item Cross References procedure.
End of Procedure.
Defining Cross Reference TypesYou use cross reference types to define relationships between items and entities such as obsolete
item numbers or supplier item numbers.
In this example, you will create a cross reference type for obsolete item numbers.
Procedure
Page 73
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 80/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Cross Reference Types page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Items: Cross References link.
5
.
Use the Cross Reference Type page to create a cross reference type that you assign to
items an entities.
Page 74
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 81/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Type field.
7
.
Enter the desired information into the Type field. Enter "Obsolete".
8
.
Click in the Description field.
9
.
Enter the desired information into the Description field. Enter "Obsolete part
number".
1
0
.
Click the Save button.
1
1
.
You have completed the Defining Cross Reference Types procedure.
End of Procedure.
Page 75
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 82/499
Training GuideOracle EBS R12 Inventory
Defining Commodity Codes
Commodity codes enable you to classify customer items. You use this classification when youdefine customer items.
In this example, you will define a commodity code for assemble-to-order items.
Procedure
Step Action
1
.
Begin by navigating to the Customer Item Commodity codes page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
Page 76
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 83/499
Training GuideOracle EBS R12 Inventory
Step Action
4
.
Click the Customer Item Commodity Codes link.
5.
Use the Customer Item Commodity Codes page to create commodity codes. Thecommodity code is the name you associate to a group of customer items.
Step Action
6
.
Click in the Commodity Code field.
7
.
Enter the desired information into the Commodity Code field. Enter "ATO".
8
.
Click in the Description field.
9
.
Enter the desired information into the Description field. Enter "Assemble-to-order
parts".
Page 77
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 84/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
Click the Save button.
1
1
.
You have completed the Defining Commodity Codes procedure.
End of Procedure.
Defining Category Sets
A Category set is a distinct grouping scheme and consists of categories. Consider this scenario:
You work for an apparel manufacture. Your company creates women's apparel, men's apparel,
and children's apparel.
In this example, you will create a category set called apparel.
Procedure
Page 78
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 85/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Category Sets page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Category Sets link.
5
.
Use the Category Sets page to create category sets. You can use categories and
category sets to group items for various reports and
programs.
Step Action
6
.
Click in the Name field.
Page 79
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 86/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
Enter the desired information into the Name field. Enter "Clothing".
8.
Click in the Description field.
9
.
Enter the desired information into the Description field. Enter "Apparel Category
Set".
1
0
.
Click in the Flex Structure field.
1
1.
The categories you assign to a category set must have the same flexfield structure as
the category set.
1
2
.
Enter the desired information into the Flex Structure field. Enter "Inventory Class".
1
3
.
This is the default category the system uses when you assign an item to the category
set. After an item is assigned to the category set, you can override the default category
and choose another relevant category for the item.
14.
Click in the Default Category field.
1
5
.
Enter the desired information into the Default Category field. Enter "CHD_APL".
1
6
.
This is the list of categories that belong to the category set. You can only add
categories that belong to the same flexfield structure as the category set.
1
7
.
Click in the Category field.
Page 80
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 87/499
Training GuideOracle EBS R12 Inventory
Step Action
1
8
.
Enter the desired information into the Category field. Enter "SALE".
1
9
.
Click the Save button.
2
0.
You have completed the Defining Category Sets procedure.
End of Procedure.
Defining CategoriesA category is a logical classification of items that have similar characteristics.
Consider this scenario: you work for a apparel manufacturer. You need to create a category for children's apparel.
Procedure
Page 81
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 88/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Categories page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Category Codes link.
5
.
Use the Find Categories page to search for existing categories or to create new
categories.
Page 82
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 89/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
Use the Categories page to define categories. You can define an unlimited number of
categories and group subsets of your categories
into category sets. A category can belong to multiple category sets.
8.
When you determine a product structure, you can assign a specific meaning to eachsegment.
Page 83
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 90/499
Training GuideOracle EBS R12 Inventory
Step Action
9
.
Click in the Structure Name field.
1
0
.
Enter the desired information into the Structure Name field. Enter "Inventory Class".
11
.
Click in the Category field.
1
2
.
Enter the desired information into the Category field. Enter "Ch_APPL".
1
3
.
Click in the Description field.
Page 84
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 91/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Enter the desired information into the Description field. Enter "Children's Apparel".
1
5
.
Click the Save button.
1
6.
You have completed the Defining Categories procedure.
End of Procedure.
Defining and Viewing Pending StatusesYou can assign item statuses to items your items. Item statuses are made up of status attributes.
Status attributes control the functionality an item over time.
In this example, you have an item that is currently in the prototype phase, but will be ready for
launch to the general public in a few months. You can use item statuses to change the item
availability from prototype to active.
Procedure
Page 85
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 92/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Master Items page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Master Items link.
5
.
Use the Master Item page to define items and perform actions on items.
Page 86
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 93/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Item field.
7
.
Press [F11].
8
.
Enter the desired information into the Item field. Enter "AS54888".
9
.
Press [Ctrl+F11].
1
0
.
Click in the Item field.
1
1
.
Click the Tools menu.
Page 87
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 94/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click Pending Status.
1
3
.
Use the Item Status History page to define item statuses for and item. You also can
determine the effective date for the status.
Step Action
1
4
.
Click in the Effective Date field.
1
5
.
Enter the desired information into the Effective Date field. Enter "10-Mar-2008".
Page 88
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 95/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Click in the Status field.
1
7
.
Enter the desired information into the Status field. Enter "Prototype".
1
8
.
Click in the Effective Date field.
19
.
Enter the desired information into the Effective Date field. Enter "24-Jul-2008".
2
0
.
Click in the Status field.
2
1
.
Enter the desired information into the Status field. Enter "Active".
2
2.
Click the Save button.
2
3
.
Click the Implement button.
or
Press [Alt+I].
2
4
.
Press the left mouse button on the OK object.
2
5
.
You have completed the Defining and Viewing Pending Statuses procedure.
End of Procedure.
Page 89
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 96/499
Training GuideOracle EBS R12 Inventory
Copying Item Templates
You can copy attributes from an existing item template to a new item template.
In this scenario, we will make modifications to one of the existing seeded templates to create a
new template.
Procedure
Step Action
1
.
Begin by navigating to the Find Item Templates page.
Click the vertical scrollbar.
2
.
Click the Inventory, Vision Operations (USA) link.
3
.
Click the vertical scrollbar.
Page 90
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 97/499
Training GuideOracle EBS R12 Inventory
Step Action
4
.
Click the Setup: Templates link.
5.
Use the Find Item Templates page to search for existing item templates.
Step Action
6
.
Click the New button.
or
Press [Alt+N].7
.
Use the Item Template page to enter new item templates.
Page 91
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 98/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Template field.
9
.
Enter the desired information into the Template field. Enter
"Finished_Good_Process".
1
0.
Click in the Description field.
1
1
.
Enter the desired information into the Description field. Enter "Finished Good
Process Template".
12
.
Click the Tools menu.
or
Press [Alt+T].
Page 92
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 99/499
Training GuideOracle EBS R12 Inventory
Step Action
1
3
.
Click the Copy Template... menu.
1
4
.
Use the Copy Template page to copy an existing item template. You can choose
which item attribute groups to copy.
Step Action
1
5
.
Click in the Template field.
1
6
.
This copies the seeded template Finished Good. It copies the attributes that belong to
the attribute groups associated with selected checkboxes.
Enter the desired information into the Template field. Enter "Finished Good".
Page 93
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 100/499
Training GuideOracle EBS R12 Inventory
Step Action
1
7
.
Point to the Apply object.
1
8
.
Click the Done (F) button.
or
Press [Alt+F].
1
9
.
Click the Yes button.
or
Press [Alt+Y].
Page 94
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 101/499
Training GuideOracle EBS R12 Inventory
Step Action
2
0
.
Click the Save button.
2
1
.
You have completed the Copying Item Templates procedure.
End of Procedure.
Assigning Items to Categories
When you enable an item in a functional area, the item is assigned to the default category set and
default category of the functional area. You can also assign an item to additional categories.
In this example, you will assign a container item to the container items category set.
Procedure
Page 95
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 102/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Master Item page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Master Items link.
Step Action
5
.
Click the View menu.
or
Press [Alt+V].
Page 96
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 103/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the Find... menu.
or
Press [F].
7
.
Use the Find Master Items page to search for existing items.
Step Action
8
.
Click in the Item field.
9
.
Enter the desired information into the Item field. Enter "A1 DOM".
1
0
.
Click the Find button.
Page 97
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 104/499
Training GuideOracle EBS R12 Inventory
Step Action
or
Press [Alt+i].
Step Action
11
.
Click the Tools menu.
or
Press [Alt+T].
1
2
.
Click the Categories menu.
or
Press [a].
1
3
.
Use the Category Assignment page to assign your item to a group of categories. You
can use this page to assign the item to more then one category set.
Page 98
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 105/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4.
Click in the Category Set field.
1
5
.
Enter the desired information into the Category Set field. Enter "Container Item".
1
6
.
This is the individual category to which you want to assign your item.
17
.
Click in the Category field.
1
8
.
Enter the desired information into the Category field. Enter "ACCESSORY".
Page 99
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 106/499
Training GuideOracle EBS R12 Inventory
Step Action
1
9
.
Click the Save button.
2
0
.
You have completed the Assigning Items to Categories procedure.
End of Procedure.
Assigning Cross Reference Types
Cross reference types define relationships between items and entities such as obsolete part
numbers or supplier items numbers.
Your company recently updated its part numbering system and you want to cross reference the
old part number with the new part number. In this example, you will cross reference the obsolete part number to the current part number.
Procedure
Page 100
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 107/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Cross Reference Types page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Cross References link.
5
.
Use the Cross Reference Types page to select a cross reference type to assign to an
item. You must select a cross reference type before you can assign it to an item. You
can assign multiple items to a cross reference type as well as assign an item to multiplecross reference types.
Page 101
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 108/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Type field.
7.
Click the Assign button.
or
Press [Alt+A].
8
.
Use the Assign Cross References page to assign cross references to create the
relationships between cross references, items, and entities.
Step Action
9
.
Click in the Item field.
10
.
This is the current item number in the system.Enter the desired information into the Item field. Enter "AS18947".
Page 102
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 109/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
The value you enter is the entity you would like to cross reference to the item. In this
case the obsolete part number.
1
2
.
Click in the Value field.
1
3
.
Enter the desired information into the Value field. Enter "FG18947".
14
.
Click in the Description field.
1
5
.
Enter the desired information into the Description field. Enter "Obsolete part
number".
1
6
.
Click the Save button.
1
7.
You have completed the Assigning Cross Reference Types procedure.
End of Procedure.
Specifying Recommended Categories
You can recommend categories for an item catalog group. This is for information and reporting
purposes only. You can print the list of categories and use the list of recommended categories
when you define items.
In this example, you will assign a default a category an existing category set to an item cataloggroup.
Procedure
Page 103
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 110/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 111/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the Details button.
or
Press [Alt+D].
7
.
Use the Item Catalog Group page to specify categories for reporting purposes.
Page 105
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 112/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click the Descriptive Elements list.
Page 106
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 113/499
Training GuideOracle EBS R12 Inventory
Step Action
9
.
Click the Categories list item.
Page 107
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 114/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
Click in the Category Set field.
1
1
.
Enter the desired information into the Category Set field. Enter "Freight Class".
1
2
.
Click in the Category field.
1
3
.
Enter the desired information into the Category field. Enter "BEST".
1
4
.
Click the Save button.
Page 108
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 115/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
You have completed the Specifying Recommended Categories procedure.
End of Procedure.
Page 109
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 116/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 117/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Organization Items page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Items: Organization Items link.
5
.
Use the Find Organization Items to enter item search criteria.
Page 111
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 118/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Item field.
7
.
Enter the desired information into the Item field. Enter "AS18947".
8
.
When you click in the Description field, the item description appears automatically.
9
.
Click in the Description field.
1
0
.
Click the Find button.
1
1
.
Use the Organization Item page to view and update items within your organization.
You cannot create items from this page. You can only create items within the Master
Item page. You can update only only-controlled item attributes.
Page 112
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 119/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click the Right button.
Page 113
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 120/499
Training GuideOracle EBS R12 Inventory
Step Action
1
3
.
Click the General Planning menu.
Page 114
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 121/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Click the Inventory Planning Method list.
Page 115
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 122/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Click the Min-Max list item.
Page 116
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 123/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Click the Save button.
1
7
.
You have completed the Updating Organization Level Items procedure.
End of Procedure.
Defining Manufacturer Part Numbers
You can define manufacturer part numbers for items. You use this information for reporting
purposes and in catalog searches for items. You can assign the same item to multiple
manufacturer's part numbers.
In this example, you will associate a manufacturer's part number to a system item.
Procedure
Page 117
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 124/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Manufacturers page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the By Manufacturers link.
5
.
Use the Manufacturers page to select the manufacturer to which you associate the
part number.
Page 118
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 125/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 126/499
Training GuideOracle EBS R12 Inventory
Step Action
9
.
Click in the Part field.
1
0
.
Enter the desired information into the Part field. Enter "2256749".
11
.
This is the item number defined in your system.
1
2
.
Click in the Item field.
1
3
.
Enter the desired information into the Item field. Enter "AS18947".
Page 120
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 127/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
When you click in the Description field, the item description appears automatically.
1
5
.
Click in the Description field.
1
6
.
Click the Save button.
1
7
.
You have successfully completed the Defining Manufacturer Part Numbers
procedure.
End of Procedure.
Defining Items
An item is a part or service you: purchase, sell, plan, manufacture, stock, distribute, or prototype.
Items can also be containers for other items as well as components you build into other items.
In this example, you will use the finished goods template to create a finished good item.
Procedure
Page 121
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 128/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Master Item page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Items: Master Items link.
5
.
Use the Master Item page to define items. When you define items, you enter only the
information you need to maintain the item. You define all items in the Master Item
page. You cannot define an item at the organization level. Oracle Inventoryautomatically switches to the Master Item page when you define a new item.
Page 122
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 129/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Item field.
7
.
Enter the desired information into the Item field. Enter "AS2000".
8
.
Click in the Description field.
9
.
Enter the desired information into the Description field. Enter "Finished Good Item".
1
0
.
Click the Tools menu.
or
Press [Alt+T].
1
1
.
Click the Copy From... menu.
Page 123
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 130/499
Training GuideOracle EBS R12 Inventory
Step Action
or
Press [C].
1
2.
Use the Copy From page copy a previously-defined item template. Item templates
contain preset values for item attributes. The item attributes are overlayed on the itemmaster when you apply it.
Step Action
1
3
.
Click in the Template field.
14
.
Enter the desired information into the Template field. Enter "Finished Good".
1
5.
Click the Apply button.
Page 124
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 131/499
Training GuideOracle EBS R12 Inventory
Step Action
or
Press [Alt+A].
1
6.
Click the Done button.
or
Press [Alt+D].
Step Action
1
7
.
Click the Save button.
1
8
.
The value of the User Item Type field was set to Finished Good when you applied the
Finished Good template. The values on other tabs of the item master were also set as
well.
Page 125
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 132/499
Training GuideOracle EBS R12 Inventory
Step Action
1
9
.
You have completed the Defining Items procedure.
End of Procedure.
Defining Item Transaction Defaults
You use the Item Transaction Defaults window to define a default subinventory for an item for
shipping, receiving and move order transactions. Oracle Shipping Execution displays the default
shipping information when you ship an item and Oracle Inventory displays the default receiving
information when you receive and item. For move orders, Oracle Inventory derives the default
put away locator when you transact an item into a locator-controlled subinventory if you do not
specify the locator when you create the move order. Before you can define item transaction
defaults you must define at least one item, one subinventory, and one locator within your
organization.
In this example, you will assign a default shipping subinventory for an item.
Procedure
Page 126
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 133/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 134/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
Use the Item Transaction Default page to assign transaction default subinventories to
items. Shipping is the default transaction type that appears. You do not need to modify
the Default For field.
Step Action
8
.
Click in the Item field.
9
.
Enter the desired information into the Item field. Enter "AS18947".
10
.
This is the default shipping subinventory for the item.
Page 128
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 135/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 136/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Master Item page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Items: Master items link.
Page 130
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 137/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click the Find... button.
6
.
Use the Find Master Items page to search for existing items.
Page 131
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 138/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 139/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 140/499
Training GuideOracle EBS R12 Inventory
Step Action
1
7
.
You have completed the Defining Item Revisions procedure.
End of Procedure.
Defining Item Relationships
You can define relationships between items. You can use these relationships to search for items.
Except in Oracle Receiving, these relationship are for inquiry and reporting purposes.
In this example, you will define a substitute item.
Procedure
Step Action
1
.
Begin by accessing the Master Item page.
Click the vertical scrollbar.
Page 134
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 141/499
Training GuideOracle EBS R12 Inventory
Step Action
2
.
Click the Inventory link.
3.
Click the vertical scrollbar.
4
.
Click the Items: Master Items link.
Step Action
5
.
Click the Find... button.
6
.
Use the Find Master Items page to search for existing items.
Page 135
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 142/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
Click in the Item field.
8
.
Enter the desired information into the Item field. Enter "AS18947".
9
.
When you click in the Description field, the item description appears automatically.
1
0
.
Click in the Description field.
1
1.
Click the Find button.
or
Press [Alt+i].
Page 136
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 143/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click the Tools menu.
or
Press [Alt+T].
1
3.
Click the Item Relationships menu.
or
Press [l].
1
4
.
Use the Item Relationships page to create relationships between items. For example,
you can create an item relationship for substitute items or items for which you can up
sell.
Page 137
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 144/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Click in the From Item field.
1
6
.
Enter the desired information into the From Item field. Enter "AS18947".
1
7
.
Click in the To Item field.
1
8
.
Enter the desired information into the To Item field. Enter "AS54888".
1
9
.
Click the Type list.
Page 138
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 145/499
Training GuideOracle EBS R12 Inventory
Step Action
2
0
.
Click the Substitute list item.
Page 139
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 146/499
Training GuideOracle EBS R12 Inventory
Step Action
2
1
.
Click the Save button.
2
2
.
You have completed the Defining Item Relationships procedure.
End of Procedure.
Assigning Subinventories to an Item
You can assign a list of subinventories to an item. You restrict an item to the list of
subinventories by setting the Restrict Subinventories attribute when you define or update an
item. You can use the item-subinventory relations to specify valid subinventories for zero
quantity cycle counts and to specify items for an abc analysis performed at the subinventory
level.
You can also specify planning information and locators for the item in its assignedsubinventories. This information is used to perform min-max planning and replenishment
processing at the subinventory level.
In this example, you will assign and item to a subinventory and set the minimum and maximumorder quantities.
Page 140
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 147/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Master Item page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4.
Click the Items: Master Items link.
Page 141
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 148/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 149/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 150/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 151/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 152/499
Training GuideOracle EBS R12 Inventory
Step Action
2
0
.
Click in the Description field.
2
1
.
If you select Min-Max Planning, then you can perform min-max planning at the
subinventory level for the item.
2
2
.
Click the Min-Max Planning option.
23
.
Click in the Min Qty field.
2
4
.
This is the minimum on-hand quantity at which to place an order.
2
5
.
Enter the desired information into the Min Qty field. Enter "100".
2
6.
This is the suggested maximum on-hand quantity to maintain as on-hand inventory.
This maximum displays as on the in-max report. Any order placed should not force theon-hand quantity of the item to exceed this quantity within this subinventory.
2
7
.
Click in the Max Qty field.
2
8
.
Enter the desired information into the Max Qty field. Enter "500".
29
.
Click the Save button.
3
0.
You have successfully completed the Assigning Subinventories to an Item
procedure.
End of Procedure.
Page 146
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 153/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 154/499
Training GuideOracle EBS R12 Inventory
Step Action
3
.
Click the vertical scrollbar.
4.
Click the Items: Master Items link.
Step Action
5
.
Click the Find... button.
6
.
Use the Find Master Items page to search for existing items.
Page 148
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 155/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
Click in the Item field.
8
.
Enter the desired information into the Item field. Enter "AS2000".
9
.
Click the Find button.
or
Press [Alt+i].
Page 149
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 156/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
Click the Org Assign button.
1
1
.
Use the Organization Assignment tab of the Master Item page to assign items to
organizations. The item is automatically assigned to the Master Organization in
which it was defined. You can assign the item to as many organizations you would
like. This page lists all of the organizations within the Master Organization including
the Master Organization.
1
2
.
Click the Assigned option.
1
3
.
Click the Assigned option.
1
4
.
Click the Assigned option.
Page 150
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 157/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 158/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 159/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
Click in the Item field.
8
.
Enter the desired information into the Item field. Enter "MugAA".
9
.
When you click in the Description field, the item description appears automatically.
1
0.
Click in the Description field.
1
1
.
Click the Find button.
or
Press [Alt+i].
Page 153
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 160/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 161/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 162/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 163/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 164/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 165/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 166/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 167/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Item Information page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Items: Item Information link.
5
.
Use the Find Item Information page to set the viewing criteria for viewing item
information. When you select All you can view information for an item in all
organizations where it is defined depending on your functional security.
Step Action
6
.
Click the All list item.
Page 161
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 168/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 169/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 170/499
Training GuideOracle EBS R12 Inventory
Lot ControlA lot can represent a quantity of an item that shares the same specifications, one or more receipts
from the same vendor, or whatever you choose. You can divide each lot into child lots that can
reflect whatever characteristics you choose for items within the lot. For example, you may divide
a lot of items form a vendor into child lots to reflect differences in quality specifications. Whenyou allocate stock for production, you can allocate specific lots to a production batch based on the
potency, age or other item characteristics. Oracle Inventory provides complete lot number support
for inventory transactions. You can enable lot control for specific items in your inventory. For
items under lot control, you can assign lot numbers to each receipt, and thereafter reference the
same lots each time you perform material transactions. This enables you to have tight control
over lot-controlled items in your inventory.
You must assign lot numbers when you receive items under lot control. You can also add
quantities to existing lot numbers and split an inventory receipt into several lots. Oracle Inventoryuses the default lot generation method that you entered in the Organization Parameters window to
determine lot numbers. You also enter the lot prefix and starting lot number in the Item Master
window when you create an item.
When you issue an item under lot control from inventory, you must specify a lot number for the
item. You can specify more than one lot to cover the transaction quantity. If you attempt to
transact an item to or from an expired lot, a warning message appears, but the system does not
prevent you from using the lot.
Upon completion of this lesson, you will be able to:
• Set up lot control.
• Create a new lot.
• Display lot information.
• Update lot information.
• Assign lot numbers within transactions.• Define lot action codes.
• View lot genealogy.
Updating Lot Information
You can use the Item Lots page you can update the following information:
• Material Status- if the lot is under material status control.
• Grade- if the lot is under grade control.
• Origination date
• Expiration date- if the lot is under shelf life control.
• Expiration action date- if the lot is under shelf life control
• Action code- if the lot is under shelf life control
• Retest date• Maturity date
• Hold date
• Disable the lot
In this example, you will disable a lot.
Page 164
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 171/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 172/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Item field.
7
.
Enter the desired information into the Item field. Enter "678910".
8
.
Click the Find button.
or
Press [Alt+d].
9
.
Use the Item Lots page to update lot information.
Page 166
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 173/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 174/499
Training GuideOracle EBS R12 Inventory
• Establish lot number uniqueness- You use the Organization Parameters page to specify
whether lot numbers should be unique for an item.
• Establish lot expiration (shelf life control) (optional)- Shelf life is the amount of time that an
item can reside in inventory before it expires.
• Determine whether to automatically generate lot numbers (optional)- You use the Organization
Parameters page to specify how to generate lot number defaults.
In this example, you will create an item, establish full lot control, and establish lot expiration
control.
Procedure
Step Action
1
.
Begin by navigating to the Master Item page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
Page 168
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 175/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 176/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 177/499
Training GuideOracle EBS R12 Inventory
Step Action
1
3
.
Click in the Template field.
1
4
.
Enter the desired information into the Template field. Enter "Finished Good".
1
5.
Click the Apply button.
or
Press [Alt+A].
16
.
Click the Done button.
or
Press [Alt+D].
Page 171
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 178/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 179/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 180/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 181/499
Training GuideOracle EBS R12 Inventory
Step Action
3
4
.
Click the Shelf life days list item.
3
5
.
This is the number of days each lot is active. At receipt, the system adds the shelf life
days to the days to the system date to determine the expiration date.
Page 175
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 182/499
Training GuideOracle EBS R12 Inventory
Step Action
3
6
.
Click in the Shelf Life Days field.
3
7
.
Enter the desired information into the Shelf Life Days field. Enter "8".
3
8
.
Click the Save button.
3
9
.
You have now completed the Setting Up Lot Control procedure.
End of Procedure.
Displaying Lot Information
You use the Item Lots page to view lot information. You can choose to enter search criteria, or
leave the search criteria blank. If you leave the search criteria blank, then the system searches for
all lots within the organization.
Page 176
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 183/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 184/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Use the Find/Lots Jobs page to search for existing lots.
Step Action
6
.
Click the Find button.
or
Press [Alt+d].
7
.
The Item Lots page depicts information about the lots within the organization such as
lot number, item number, and lot status.
8
.
You have completed the Displaying Lot Information procedure.
End of Procedure.
Page 178
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 185/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 186/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 187/499
Training GuideOracle EBS R12 Inventory
Step Action
9
.
Click in the Action Description field.
10
.
Enter the desired information into the Action Description field. Enter "Discard".
1
1
.
Click the Save button.
1
2
.
You have completed the Defining Lot Action Codes procedure.
End of Procedure.
Creating a New Lot
You use the Edit Item Lots window to create new lots manage existing lot information. You canuse the Edit Item Lots window to create new lots before you receive material in the warehouse.
In this example, you will generate a new lot for an item.
Procedure
Page 181
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 188/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 189/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
Use the Edit Item Lots page to generate new lots. The only items eligible are items
under lot control.
Page 183
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 190/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Item field.
9
.
Enter the desired information into the Item field. Enter "678910".
1
0.
After you enter the item for which you want to generate the lot, you must click in the
Lot, field. If you do not click in the Lot, field then the Generate Lot button does notappear.
1
1
.
Click in the Lot field.
12
.
Click the Generate Lot button.
or
Press [Alt+G].
Page 184
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 191/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 192/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 193/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 194/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 195/499
Training GuideOracle EBS R12 Inventory
Step Action
1
7
.
Enter the desired information into the Quantity field. Enter "600".
1
8
.
Click the Lot / Serial button.
or
Press [Alt+r].
1
9
.
Use the Lot Entry page to enter lot transaction information for items under lot control.
You can also use this page to generate new lots.
Step Action
2
0.
Click in the Lot Number field.
Page 189
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 196/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 197/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 198/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 199/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 200/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 201/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 202/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 203/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 204/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 205/499
Training GuideOracle EBS R12 Inventory
Step Action
or
Press [C].
1
2.
Use the Copy From page to copy information from an existing item template, and
overlay the item information on the template to the new item definition.
Step Action
1
3
.
Enter the desired information into the Template field. Enter "Finished Good".
14
.
Click the Apply button.
or
Press [Alt+A].
Page 199
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 206/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Click the Done button.
or
Press [Alt+D].
Step Action
1
6
.
Click the Inventory tab.
17
.
Click the Generation list.
1
8.
When you select Predefined as the serial control type, you must predefine serial
numbers for the item.
Page 200
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 207/499
Training GuideOracle EBS R12 Inventory
Step Action
1
9.
Click the Predefined list item.
Page 201
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 208/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 209/499
Training GuideOracle EBS R12 Inventory
Step Action
2
5
.
Click the Org Assign button.
2
6
.
Click the Assigned option.
2
7
.
Click the Vertical scrollbar.
28
.
Click the Assigned option.
2
9
.
Click the Save button.
3
0
.
You have completed the Setting Up Serial Number Control procedure.
End of Procedure.
Maintaining Serial Number Information
You use the Serial Numbers page to update supplier information associated with you serial
numbers. You can also view all serial numbers created in you current organization. In addition
you can view the location and status information and update supplier information associated with
your serialized units.
In this example, you will view the serial information for an item.
Procedure
Page 203
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 210/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating the Find Serials page.
Click the Vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Serial Numbers link.
5
.
Use the Find Serials page to search for existing serial numbers.
Page 204
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 211/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 212/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 213/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 214/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 215/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 216/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 217/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 218/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 219/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 220/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Enter the desired information into the Locator field. Enter "1.2.2".
1
7
.
Click the Lot - Serial button.
1
8
.
Use the Serial Entry page to assign serial numbers to items upon receipt.
Step Action
1
9
.
Click in the Starting Serial Number field.
Page 214
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 221/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 222/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 223/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Serial page.
Click the vertical scrollbar.
2.
Click the vertical scrollbar.
3
.
Click the Serial Numbers link.
4
.
User the Find Serials page to search for existing serial numbers.
Step Action
5
.
Click in the Item field.
6
.
Enter the desired information into the Item field. Enter "WM579".
Page 217
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 224/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
Click in the Description field.
8.
Click the Find button.
or
Press [Alt+i].
Step Action
9
.
Click the vertical scrollbar.
1
0
.
Use the Serial Numbers page to access the Genealogy page. You must select a serial
number for which to view the genealogy.
Page 218
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 225/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 226/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Click the Material Transactions tab.
1
5
.
The Transaction Details alternative region displays item transaction information such
as the transaction date, subinventory, and transaction type.
1
6
.
You have completed the Viewing Serial Number Genealogy procedure.
End of Procedure.
Page 220
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 227/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 228/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Material Status Definition page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Transactions: Material Status link.
5
.
Use the Material Status Definition page to associate allowed and disallowed
transactions. Disallowed transactions and planning actions are cumulative. When you
setup transaction types, you determined whether some transactions can be restricted bymaterial status. the transactions for which you enable status control in the
Transactions Types page appear in the Material Status Definition page. If you do
not enable status control for a transaction type, then the transaction type is always
allowed. You can also assign the planning attributes Allow Reservations, Include in
ATP and Nettable to the material statuses you create. If the system finds a status that
disallows the transaction, whether at the serial, lot locator, or subinventory level, the
transaction fails.
Page 222
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 229/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 230/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 231/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 232/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 233/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 234/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 235/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New button.
7
.
Click in the Transaction Type field.
8
.
Enter the desired information into the Transaction Type field. Enter "Subinventory
Transfer".
9
.
The Weight value enables you to set the processing order. For example, if three
transactions satisfy the transaction criteria, then the system processes the transaction
with the highest weight.
1
0
.
Click in the Weight field.
1
1
.
Enter the desired information into the Weight field. Enter "2".
Page 229
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 236/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click in the Organization field.
1
3
.
Enter the desired information into the Organization field. Enter "M2".
1
4
.
Click the Consume Consigned option.
15
.
Click in the Owning Party field.
1
6
.
Enter the desired information into the Owning Party field. Enter "Goodway-SAN
FRANCISCO".
1
7
.
Click in the From Subinventory field.
1
8.
Enter the desired information into the From Subinventory field. Enter "FGI".
1
9
.
Click the horizontal scrollbar.
2
0
.
Click in the To Subinventory field.
21
.
Enter the desired information into the To Subinventory field. Enter "FGI".
2
2
.
Click in the Item field.
Page 230
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 237/499
Training GuideOracle EBS R12 Inventory
Step Action
2
3
.
Enter the desired information into the Item field. Enter "AS54888".
2
4
.
Click the Save button.
2
5.
You have completed the Defining Consumption Transaction Rules procedure.
End of Procedure.
Defining Account AliasesAn account alias is an easily recognized name or label that represents a general ledger account
number. You can view report, and reserve against an account alias. During a transaction, you
cause the account alias instead of an account number to refer to the account.
In this example, you will create a miscellaneous account alias.
Procedure
Page 231
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 238/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Account Aliases page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Account Aliases link.
5
.
Use the Account Aliases page to create inventory account aliases GL accounts. You
must create an inventory account alias if you wish to use an alias for that GL account
in inventory transactions.
Page 232
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 239/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 240/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Enter the desired information into the null field. Enter "01-110-6100-0000-000".
1
3
.
Click the Save button.
1
4.
You have completed the Defining Account Aliases procedure.
End of Procedure.
Defining Transaction TypesA transaction type is the combination of a transaction source type and a transaction action. It
is used to classify a particular transaction for reporting and querying purposes. Oracle Inventory
also uses transaction types to identify certain transaction to include in historical usagecalculations for ABC analysis or forecasting.
In this example, you will create transaction type for a goodwill donation.
Procedure
Page 234
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 241/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 242/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click the User tab.
6
.
Click the New button.
7
.
Click in the Name field.
8
.
Enter the desired information into the Name field. Enter "Issue to Charity".
9
.
Click in the Description field.
1
0
.
Enter the desired information into the Description field. Enter "Issue to Goodwill".
Page 236
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 243/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Click in the Source Type field.
1
2
.
Enter the desired information into the Source Type field. Enter "Charity".
1
3
.
Click in the Action field.
14
.
Enter the desired information into the Action field. Enter "Issue from stores".
1
5
.
Click the horizontal scrollbar.
1
6
.
Select the Status Control check box to enable material status control for this
transaction type.
1
7.
Click the Status Control option.
1
8
.
Click the Save button.
1
9
.
You have completed the procedure Defining Transaction Types.
End of Procedure.
Defining Transaction Reasons
A transaction reason is a standard means of classifying or explaining the reason for a
transaction.
Consider this scenario: You have a pick slip that requires you to pick material from a locator.
There is not enough material in the locator for the pick. When you pick the material from the
Page 237
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 244/499
Training GuideOracle EBS R12 Inventory
locator, it does not satisfy your requirement. You need a transaction reason to justify why you did
not meet the requirement.
In this example, you will create a transaction reason.
Procedure
Step Action
1
.
Begin by navigating to the Transaction Reasons page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Setup: Reasons link.
Page 238
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 245/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Use the Transaction Reasons page to define transaction exceptions. Transaction
reasons can be used in all desktop transaction pages and mobile pages. You can use
transaction treason with any type of material transaction.
Step Action
6
.
Click the New button.
7
.
Click in the Name field.
8
.
Enter the desired information into the Name field. Enter "Under".
9
.
Click in the Description field.
Page 239
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 246/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
Enter the desired information into the Description field. Enter "Under pick due to
inventory shortage".
1
1
.
Click the Save button.
1
2.
You have completed the Defining Transaction Reasons procedure.
End of Procedure.
Page 240
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 247/499
Training GuideOracle EBS R12 Inventory
TransactionsA transaction is an item movement into, within, or out of inventory. A transaction changes the
quantity, location, planning responsibility, and cost of an item.
Oracle Inventory supports a number of predefined and user-defined transaction types. Everymaterial movement has a corresponding set of accounting transaction that Oracle Inventory
automatically generates. All transactions validate the various controls (revisions, locator, lot
number, serial number, and secondary unit of measure) you enable for items.
Upon completion of this lesson, you will be able to:
• Transfer between subinventories.
• Perform miscellaneous transactions.
• Transfer directly between organizations.
• Transfer between organizations using intransit processes.• Perform planning transfer transactions.
• View potential shortages.
• View and maintain movement statistics.• View material transactions.• View pending transactions.
Viewing Potential Shortages
A material shortage occurs whenever unsatisfied demand exceeds available quantify for incoming
supply.
In this example, you will view potential shortages.
Procedure
Page 241
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 248/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Potential Shortages page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the View Potential Shortage link.
5
.
You use the Find Potential Shortages page to search for potential shortages of items
for which there is outstanding demand in the organization.
You can search by jobs and schedules, sales orders, or both. You can also search byindividual item. You can leave all search criteria blank and search for potential
shortages across your entire organization. This however, can take a significant amount
of time.
Page 242
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 249/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Item field.
7
.
Enter the desired information into the Item field. Enter "CM66372".
8
.
Click the Find button.
or
Press [Alt+i].
9
.
The View Potential Shortages page displays a summary of the potential shortage. It
shows the Demand Type (job schedule or order) and Identifier ( job number or order
number) as well as the quantity.
Page 243
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 250/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
Click the Supply/Demand button.
or
Press [Alt+S].
1
1.
The Supply/Demand Detail page depicts detailed information about the item. It shows
the available quantity as well as from which the demand originated.
Page 244
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 251/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click the File menu.
or
Press [Alt+F].
1
3.
Click the Close Form menu.
or
Press [C].
Page 245
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 252/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Click the Details button.
or
Press [Alt+D].
1
5.
The View Discrete Jobs page shows the details about the discrete job that is causing
the demand shortage.
Page 246
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 253/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Click the File menu.
or
Press [Alt+F].
1
7.
Click the Close Form menu.
or
Press [C].
1
8
.
You have completed the Viewing Potential Shortages procedure.
End of Procedure.
Viewing Pending Transactions
Use the Pending Transactions page to view, edit, and correct pending transactions beforevalidation.
Page 247
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 254/499
Training GuideOracle EBS R12 Inventory
In this example, you will view a pending move order transaction.
Procedure
Step Action
1
.
Begin by navigating to the Find Pending Transactions page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the Pending Transactions link.
4
.
Use the Find Pending Transactions page to search for pending transactions.
Page 248
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 255/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click in the Transaction Type field.
6
.
Enter the desired information into the Transaction Type field. Enter "Move Order
Transfer".
7
.
Click the Find button.
or
Press [Alt+i].
8
.
Use the Pending Transactions page to view all pending transactions. Use it to view
information about the item, the transaction quantity, the transaction source, and so on.
Page 249
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 256/499
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 257/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Click the Serial button.
or
Press [Alt+r].
1
2.
Use the Serial Numbers page to view serial information for a pending serial
transaction.
1
3
.
You have completed the Viewing Pending Transactions procedure.
End of Procedure.
Viewing Material Transactions
You can view detail associated with inventory transactions. You can search for transaction
information by entering a combination of search criteria.
In this example, you will search for all transaction performed on item AS18947 in the last six
months.
Page 251
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 258/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Find Material Transactions page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the Material Transactions link.
4
.
Use the Find Material Transactions page to enter your material transaction search
criteria. You can choose to search on a variety of information.
Page 252
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 259/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Enter the desired information into the From Date: Transaction Dates field. Enter
"28-SEP-2008 00:00:00".
6
.
Click in the Item field.
7
.
Enter the desired information into the Item field. Enter "AS18947".
8
.
Click the Find button.
or
Press [Alt+i].
9.
The Location tab of the Material Transactions page depicts where the item currentlyresides as well as item information, consigned and VMI information, and transaction
information.
Page 253
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 260/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
Click the horizontal scrollbar.
1
1
.
Click the horizontal scrollbar.
1
2
.
Click the horizontal scrollbar.
1
3
.
Click the horizontal scrollbar.
1
4
.
Click the Intransit tab.
Page 254
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 261/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
The Intransit tab displays the item, shipment number, waybill, and air number, freight
code, container quantity, and transaction type information.
1
6
.
Click in the Item field.
1
7
.
Click the Reason, Reference tab.
18
.
The Reason, Reference tab displays the reason for the transaction if you entered one,error code, costed indicator, supplier lot, source code, source line ID, and transaction
type information.
1
9
.
Click the horizontal scrollbar.
2
0
.
Click the horizontal scrollbar.
2
1.
Click the horizontal scrollbar.
2
2
.
Click the horizontal scrollbar.
2
3
.
Click the Transaction ID tab.
24
.
The Transaction ID tab displays the item and transaction information.
2
5
.
Click in the Item field.
Page 255
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 262/499
Training GuideOracle EBS R12 Inventory
Step Action
2
6
.
Click the horizontal scrollbar.
2
7
.
Click the horizontal scrollbar.
2
8
.
Click the horizontal scrollbar.
29
.
Click the horizontal scrollbar.
3
0
.
Click the horizontal scrollbar.
3
1
.
Click the horizontal scrollbar.
3
2.
Click the Transaction Type tab.
3
3
.
The Transaction Type tab displays the item, transaction source type information, and
transaction information.
3
4
.
Click the horizontal scrollbar.
35
.
Click the Consumption Advice tab.
3
6
.
The Consumption Advice tab displays the consigned and vendor-managed
information.
Page 256
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 263/499
Training GuideOracle EBS R12 Inventory
Step Action
3
7
.
Click in the Item field.
3
8
.
Click the horizontal scrollbar.
3
9
.
Click the Distributions button.
or
Press [Alt+b].
40
.
Use the Material Transaction Distributions page to view detailed information aboutthe transactions.
You use the Account tab to view the account information associated with transaction
as well as the transaction value and transaction type.
Page 257
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 264/499
Training GuideOracle EBS R12 Inventory
Step Action
4
1
.
Click in the Transaction Date field.
4
2
.
Click the Location tab.
4
3.
The Location tab gives detailed transaction location information including operation
information if applicable.
4
4
.
Click in the Subinventory field.
4
5
.
Click the Type tab.
4
6
.
The Type tab displays the transaction type information.
4
7.
Click in the Transaction Date field.
48
.
Click the Currency tab.
4
9
.
The Currency tab displays the currency information as well as the conversion rate if
applicable.
50
.
Click in the Currency field.
5
1.
Click the Comments tab.
Page 258
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 265/499
Training GuideOracle EBS R12 Inventory
Step Action
5
2
.
The Comments tab displays information such as the transaction reason and transaction
flow type if applicable.
5
3
.
Click in the Reason field.
5
4.
You have completed the Viewing Material Transactions procedure.
End of Procedure.
Transferring Directly Between OrganizationsYou use direct interorganization transfers to move inventory directly from a shipping
organization to a destination organization. There is no intermediary step when you perform a
direct interorganization transfer.
In this example, you will transfer an item directly to another organization.
Procedure
Page 259
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 266/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Inter-organization Transfer page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the Inter-organization Transfer link.
4
.
You use the Inter-organization Transfer page to enter information about the
organization to which you are shipping. You can only enter valid organizations that
you defined on the Shipping Networks window. You use this page to enter both direct
interorganization transfers and intransit shipments. You use the Type field to choose
which type of shipment.
You must also enter the shipment number for an intransit shipment. The shipmentnumber uniquely identifies and item or group of items to transfer.
Page 260
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 267/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click in the To Org field.
6
.
Enter the desired information into the To Org field. Enter "B2".
7
.
Click in the Type field.
8
.
Enter the desired information into the Type field. Enter "Direct Org Transfer".
9
.
Click the Transaction Lines button.
or
Press [Alt+r].
1
0
.
You use the Direct Org Transfer page to enter information about items you transfer
between organizations. You enter the shipping subinventory and optionally the
destination subinventory.
Page 261
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 268/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1.
Click in the Item field.
1
2
.
Enter the desired information into the Item field. Enter "CM11222".
1
3
.
Click in the Subinventory field.
14
.
Enter the desired information into the Subinventory field. Enter "Stores".
1
5
.
Click in the To Subinv field.
Page 262
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 269/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Enter the desired information into the To Subinv field. Enter "Consigned".
1
7
.
Click the horizontal scrollbar.
1
8
.
Click in the Quantity field.
19
.
Enter the desired information into the Quantity field. Enter "15".
2
0
.
Click the Lot / Serial button.
or
Press [Alt+r].
2
1
.
You use the Lot Entry page to enter lot numbers when you transfer lots. You can
choose to generate new lots or transfer existing lots.
Page 263
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 270/499
Training GuideOracle EBS R12 Inventory
Step Action
2
2
.
Click in the Lot Number field.
2
3
.
Enter the desired information into the Lot Number field. Enter "S00268".
2
4
.
Click in the Quantity field.
2
5
.
Enter the desired information into the Quantity field. Enter "15".
2
6
.
Click the Done button.
or
Press [Alt+D].
Page 264
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 271/499
Training GuideOracle EBS R12 Inventory
Step Action
2
7.
Click the Save button.
2
8
.
You have completed the Transferring Directly Between Organizations procedure.
End of Procedure.
Transferring Consigned and VMI Material
You use the Consigned Transactions page to transfer ownership of consigned inventory. Youcan transfer ownership of consigned material to or from a supplier.
In this example, you will transfer ownership from a supplier to regular stock.
Page 265
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 272/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Consigned Transactions page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the Consigned Transactions link.
4.
On the Consigned Transactions page you choose which Type of ownership transfer you would like to perform. You can transfer ownership from a supplier (Transfer to
Regular) or to a supplier (Transfer to Consigned).
Page 266
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 273/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click in the Type field.
6
.
Enter the desired information into the Type field. Enter "Transfer to Regular".
7
.
Click the Transaction Lines button.
or
Press [Alt+r].
8
.
The Transfer to Regular page enables you to transfer material to general stock. You
enter the item, subinventory, and owning party information.
You must also review the availability fields before you transfer the item. The available
quantity is the quantity on hand minus all reservations for the item.
Page 267
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 274/499
Training GuideOracle EBS R12 Inventory
Step Action
9
.
Click in the Item field.
1
0
.
Enter the desired information into the Item field. Enter "CM66275".
11
.
Click in the Subinventory field.
1
2
.
Enter the desired information into the Subinventory field. Enter "RIP".
1
3
.
Click in the Owning Party field.
Page 268
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 275/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Enter the desired information into the Owning Party field. Enter "Pittsburgh
Electronics - Bridgeville".
1
5
.
Click the horizontal scrollbar.
1
6
.
Click in the Quantity field.
17
.
Enter the desired information into the Quantity field. Enter "15".
1
8
.
Click the Save button.
1
9
.
You have completed the Transferring Consigned and VMI Material procedure.
End of Procedure.
Transferring Between Subinventories
You use the Subinventories Transfers page to transfer material within your current organization
between subinventories or between two locators within the same subinventory.
In this example, you will transfer an item between two subinventories.
Procedure
Page 269
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 276/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Subinventory Transfers page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the Subinventory Transfer link.
4
.
You use the Subinventory Transfer page to select the type of subinventory transfer to
perform. The available choices are subinventory transfer and backflush transfer.
When you transfer between subinventories, you can transfer from asset to expense
subinventories as well as from tracked to non-tracked subinventories. If an items has a
restricted lists of subinventories, then you can transfer the item from and to
subinventories on that list. The system allows you to use user-defined transaction types
when you perform a subinventory transfer.
Page 270
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 277/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click in the Type field.
6
.
Enter the desired information into the Type field. Enter "Subinventory Transfer".
7
.
Click the Transaction Lines button.
or
Press [Alt+r].
8
.
You use the Subinventory Transfer page to enter the from and to subinventory
information. Optionally, you can enter a transaction reason on this page as well. If the
item is under lot or serial control you can enter the lot control, you can enter the lot
information directly on this page, or you can access the Lot Entry page from this pageas well. If the item is under serial control, you can access the Serial Entry page from
this page.
Page 271
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 278/499
Training GuideOracle EBS R12 Inventory
Step Action
9
.
Click in the Item field.
1
0
.
Enter the desired information into the Item field. Enter "AS18947".
11
.
Click in the Subinventory field.
1
2
.
Enter the desired information into the Subinventory field. Enter "FGI".
1
3
.
Click in the Quantity field.
Page 272
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 279/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Enter the desired information into the Quantity field. Enter "15".
1
5
.
Click in the To Subinv field.
1
6
.
Enter the desired information into the To Subinv field. Enter "Stores".
17
.
Click the Save button.
1
8
.
You have completed the Transferring Between Subinventories procedure.
End of Procedure.
Transferring Between Organizations Using Intransit Processes
You use intransit shipments when the transportation times between organizations is significant.
In this example you will transfer an item to another organization.
Procedure
Page 273
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 280/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Inter-organization Transfer page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the Inter-organization Transfer link.
4
.
You use the Inter-organization Transfer page to enter information about the
organization to which you are shipping. You can only enter valid organizations that
you defined on the Shipping Networks page. You use the Type field to choose which
type of shipment.
You enter the shipment number for an intransit shipment. The shipment number
uniquely identifies and item or group of items to transfer.
Page 274
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 281/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click in the To Org field.
6
.
Enter the desired information into the To Org field. Enter "Boston Manufacturing".
7
.
Click in the Type field.
8
.
Enter the desired information into the Type field. Enter "Intransit Shipment".
9
.
Click in the Number field.
1
0
.
Enter the desired information into the Number field. Enter "4567".
Page 275
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 282/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Click the Transaction Lines button.
or
Press [Alt+r].
1
2
.
You use the Intransit Shipment page to enter information about the item. You enter
the shipping subinventory, and optionally enter the destination subinventory if you
know it at the time of shipment.
Step Action
13
.
Click in the Item field.
1
4.
Enter the desired information into the Item field. Enter "AS18947".
Page 276
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 283/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Click in the Subinventory field.
1
6
.
Enter the desired information into the Subinventory field. Enter "FGI".
1
7
.
Click in the To Subinv field.
18
.
Enter the desired information into the To Subinv field. Enter "Stores".
1
9
.
Click in the Quantity field.
2
0
.
Enter the desired information into the Quantity field. Enter "100".
2
1.
Click the Save button.
22
.
You have completed the Transferring Between Organization Using Intransit
Processes procedure.
End of Procedure.
Performing Planning Transfer Transactions
Vendor managed inventory is a procurement and planning practice in which you delegate key
inventory management functions to one or more supplies under this aggrievement, the supplier determines the items, quantities,s and delivery schedules on your behalf based on information the
supplier receives from your inventory and procurement systems.
In this example, you will perform a planning transfer transaction.
Page 277
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 284/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Planning Transfer page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the Transactions: Planning Transfer link.
4.
Planning Transfers enable you to assume the planning responsibility from the supplier.This transaction does not move goods, it changes the planning organization from the
supplier site to the internal organization that holds the goods. After you perform a
planning transfer and run collection, you supplier can no longer see the transferred
quantity in the on-hand quantity column.
Page 278
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 285/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click the Transaction Lines button.
or
Press [Alt+r].
6
.
You use the Planning Transfer page to information about the vendor-managed
inventory to issue or receive.
Page 279
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 286/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
Click in the Item field.
8
.
Enter the desired information into the Item field. Enter "CM66273".
9
.
This is the subinventory where the vendor managed inventory resides.
1
0
.
Click in the Subinventory field.
1
1.
Enter the desired information into the Subinventory field. Enter "ConsignVen".
1
2
.
This is the planning party from which you will take over the planning responsibility.
Page 280
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 287/499
Training GuideOracle EBS R12 Inventory
Step Action
1
3
.
Click in the Planning Party field.
1
4
.
Enter the desired information into the Planning Party field. Enter "Pittsburgh
Electronics- BRIDGEVILLE".
1
5
.
Click in the UOM field.
16
.
Enter the desired information into the UOM field. Enter "BG".
1
7
.
Click in the Quantity field.
1
8
.
Enter the desired information into the Quantity field. Enter "2".
1
9.
Click the Save button.
20
.
You have completed the Performing Planning Transfer Transactions procedure.
End of Procedure.
Performing Miscellaneous Transactions
Miscellaneous transactions enable you to issue material to individuals or projects that are not in
inventory, receiving or work in process.
In this example, you will perform a miscellaneous receipt of an item.
Page 281
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 288/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Miscellaneous Transaction page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the Miscellaneous Transaction link.
4.
You use the Miscellaneous Transaction page to enter transactions that you normallydo not process in day-to-day business. These could include a research and development
group or an accounting department. You can also make manual adjustments to the
general by receiving material from one account to inventory, and then issuing that
material from inventory to another account.
Page 282
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 289/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click in the Type field.
6
.
Enter the desired information into the Type field. Enter "Miscellaneous receipt".
7
.
Click in the Account field.
8
.
This is the general ledger account to which you are going to charge the transaction.
9
.
Enter the desired information into the Account field. Enter "01-580-7740-0000-000".
1
0
.
Click the Transaction Lines button.
or
Press [Alt+r].
Page 283
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 290/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Use the Miscellaneous receipt page to receive stock in to inventory.
Step Action
1
2
.
Click in the Item field.
1
3
.
Enter the desired information into the Item field. Enter "AS54888".
1
4
.
Click in the subinventory field.
Page 284
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 291/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Enter the desired information into the subinventory field. Enter "Stores".
1
6
.
Click in the Quantity field.
1
7
.
Enter the desired information into the Quantity field. Enter "100".
18
.
Click the Save button.
1
9
.
You have completed the Performing Miscellaneous Transactions procedure.
End of Procedure.
Viewing Transaction Summaries
You can view transaction summaries for items transacted within a specified date range. You can
use search criteria to further narrow the focus of the information summarized. You can use this
information for input, output, and transaction history analysis.
In this example, you will view the transaction history for an item.
Procedure
Page 285
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 292/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Summarize Transactions page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the Transaction Summaries link.
4
.
Use the Summarize Transactions page to enter transaction search criteria.
Page 286
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 293/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click in the From Date: Transaction Dates field.
6
.
Press [Backspace].
7
.
Enter the desired information into the From Date: Transaction Dates field. Enter "7".
8
.
Click in the Item field.
9
.
Enter the desired information into the Item field. Enter "AS54888".
1
0
.
Click the Summarize button.
or
Press [Alt+i].
Page 287
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 294/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Use the Transaction Summaries page to view information about the transactions for
the period of time you entered on the Summarize Transactions page. The
Subinventory tab displays transaction subinventory information as well as the net
quantity, net value, and net volume.
Step Action
1
2
.
Click the Subinventory, Locator tab.
1
3
.
Use the Subinventory, Locator tab to view subinventory and locator transaction
history.
1
4
.
Click the Source Type tab.
Page 288
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 295/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Use the Source Type tab to view the transaction source type.
1
6
.
Click the Transaction Type tab.
1
7
.
Use the Transaction Type tab to view the transaction type information.
18
.
Click the Action tab.
1
9
.
Use the Action tab to view the transaction action.
2
0
.
Click the Source / Transaction Type tab.
2
1.
Use the Source / Transaction Type tab to view the transaction source and transaction
type information.
2
2
.
Click the Right button.
Page 289
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 296/499
Training GuideOracle EBS R12 Inventory
Step Action
2
3
.
Click the Cost Group menu.
2
4
.
Use the Cost Group tab to group cost group information.
Page 290
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 297/499
Training GuideOracle EBS R12 Inventory
Step Action
2
5
.
Click the Subinventory, Cost Group tab.
2
6
.
Use the Subinventory, Cost Group tab to view subinventory and Cost Group
information.
2
7.
You have completed the Viewing Transaction Summaries procedure.
End of Procedure.
Page 291
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 298/499
Training GuideOracle EBS R12 Inventory
On Hand and AvailabilityOn-hand quantity is the physical quantity that resides in your subinventory. For example, the
Bulk subinventory has 1000 items that reside in it. Therefore, the on-hand quantity for the Bulk
subinventory is 1000.
A reservation is a link between a supply source and a demand source. A reservation creates a
permanent date link between a supply source and a demand source and represents a guaranteed
allotment of material to a specified demand source. Item reservations prevent the allocation of
material you previously set aside for a sales order account, account alias inventory allotment,
user-defined source, process batch components, or maintenance and repair overhaul work order
components.
Availability = on-hand quantity – reservations = pending transactions.
Upon completion of this lesson, you will be able to:
• View on-hand quantities.
• View status information.• View attribute information.• Perform a mass move.
• Perform a status update.
• Perform a cost group transfer.
• Update a grade.
• View item supply and demand information.
• Create a reservation.
Viewing On-Hand Quantities
You use the Material Workbench page to view material in receiving, on hand quantities andinbound material.
In this example, you will view the material that resides in receiving for your organization.
Procedure
Page 292
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 299/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Query Material page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the On-hand Quantity link.
5
.
Use the Query Material page to look for your material. you can view material within
your organization, or material across organizations.
You can search for three types of material, on hand, receiving and inbound. On-hand
material resides in a storage location. Receiving material resides in a receiving
subinventory and cannot be counted as on-hand quantity. Inbound material is en route
to the warehouse.
Page 293
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 300/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Query field.
7
.
Click the On-hand option.
8
.
Click the Receiving option.
9
.
Click the Find button.
or
Press [Alt+n].
10
.
The Material Workbench page contains two panes, the View By pane and theQuantity pane. You determine the information that appears on the View By pane
when you select a view option on the Find Query page. The material location option
that you select dictates which viewing option the information the Material
Workbench page displays. When you View by receiving,you can only view by
Location.
Page 294
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 301/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
The material workbench tree shows the different types of inventory. It lists each type
of material location as a different node under an organization. the information under
each material location type differs. When you view material in a receiving location,
you can see material in receiving sub inventories within the organization.
As you navigate through the tree structure, the information in the quantity pane
changes. The quantity pane summarizes the material information at the next lower
level from the current tree node. For example, if you select, the top-level Organizations
node, then the quantity pane summarizes the information for each organization. If you
select a particular organization, then the Quantity pane, displays information for thesubinventories of the organization.
Step Action
12
.
Click an entry in the Organizations tree control.
1
3
.
Click an entry in the M1 tree control.
Page 295
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 302/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Click an entry in the Receiving tree control.
1
5
.
Click the horizontal scrollbar.
1
6
.
Click the horizontal scrollbar.
17
.
Click the horizontal scrollbar.
1
8
.
Click the horizontal scrollbar.
1
9
.
Click the horizontal scrollbar.
2
0.
Click the horizontal scrollbar.
2
1
.
Click the horizontal scrollbar.
2
2
.
Click the horizontal scrollbar.
23
.
Click the horizontal scrollbar.
2
4
.
Click the horizontal scrollbar.
Page 296
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 303/499
Training GuideOracle EBS R12 Inventory
Step Action
2
5
.
Click the horizontal scrollbar.
2
6
.
You have completed the Viewing On-hand Quantities procedure.
End of Procedure.
Viewing Item Supply and Demand Information
You use the Supply/Demand Detail page view the supply and demand information and the
current and project available quantities of an item.
In this example, you will view projected supply and demand information.
Procedure
Page 297
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 304/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Supply Demand Item page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Item Supply/Demand link.
5
.
Use the Supply Demand Item page to enter the item for which to review the supply
and demand history.
You can view the supply and demand information for all subinventories, ATPsubinventories, or Net subinventories.
Page 298
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 305/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Item field.
7.
Enter the desired information into the Item field. Enter "AS18947".
8
.
Click the Find button.
or
Press [Alt+i].
9.
Use the Supply Demand Detail page to view the supply and demand information for the item. You can see the supply or demand source type such as purchase order, sales
order, and WIP discrete job. You can also see the identifier for the supply source or
demand source such as the purchase order number or work in process discrete jobnumber. In addition, you can see the quantity information for the item number.
Page 299
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 306/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
Click in the Date field.
1
1
.
You have completed the Viewing Item Supply and Demand Information procedure.
End of Procedure.
Viewing Item Availability
You use the Material Workbench page to view item availability.
In this example, you will view item availability.
Procedure
Page 300
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 307/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Material Workbench page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the On-hand Quantity link.
5
.
Use the Query Material page to enter the search criteria which determines the
information that you view on the Material Workbench page.
Step Action
6
.
Click in the Item / Revision field.
Page 301
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 308/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
Enter the desired information into the Item / Revision field. Enter "AS18947".
8.
Click the Find button.
or
Press [Alt+n].
9.
Use the Material Workbench page to view where material is located in your organization.
Step Action1
0
.
Click the Availability button.
or
Press [Alt+i].
Page 302
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 309/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Use the Availability page to view the item availability. You can view the total
quantity, the number you can reserve, and the number you can transact. These numbers
may differ based on existing reservations and material status control.
Step Action
1
2
.
Click in the Material Location field.
1
3
.
You have completed the Viewing Item Availability procedure.
End of Procedure.
Viewing Attribute Information
You can use the Material Workbench page to view the attributes of a particular lot or serial.
In this example, you will view the lot attributes.
Page 303
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 310/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Query Material page.
Click the vertical scrollbar.
2
.
Click the vertical scrollbar.
3
.
Click the On-hand Quantity link.
4
.
Use the Query Material page to enter search criteria that determines what appears on
the Material Workbench page.
Page 304
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 311/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click the View By list.
Page 305
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 312/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the Lot list item.
Page 306
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 313/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
Click in the Item / Revision field.
8
.
Enter the desired information into the Item / Revision field. Enter "CM11222".
9
.
Click the Find button.
or
Press [Alt+n].
1
0
.
The Material Workbench page provides you with information about the material in
your organization.
Page 307
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 314/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Click an entry in the Organizations tree control.
1
2
.
Click an entry in the M1 tree control.
1
3
.
Click the S00286 tree item.
1
4
.
Click the Attributes button.
or
Press [Alt+A].
1
5
.
The Attributes page displays lot flexfield attribute information as well as lot
categories.
Page 308
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 315/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6.
Click in the Attribute field.
1
7
.
You have completed the Viewing Attribute Information procedure.
End of Procedure.
Updating a Grade
You can use the Material Workbench page to update the grade of a lot and grade controlleditem.
In this example, you will update a grade.
Page 309
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 316/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Query Material page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4.
Click the On-hand Quantity link.
5
.
Use the Query Material page to enter search criteria that determines what appears on
the Material Workbench page.
Page 310
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 317/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Query field.
7
.
To update the grade of a lot, you must View By grade.
8
.
Click the View By list.
Page 311
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 318/499
Training GuideOracle EBS R12 Inventory
Step Action
9
.
Click the Grade list item.
Page 312
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 319/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
Click in the Item / Revision field.
1
1
.
Enter the desired information into the Item / Revision field. Enter "Strawberries".
1
2
.
Click in the Description field.
1
3
.
Click the Find button.
or
Press [Alt+n].
1
4
.
The Material Workbench page enables you to view items in your organization. When
you view by grade, you can see all of the items in your organization under lot and
grade control.
Page 313
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 320/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5.
Click an entry in the Grade tree control.
1
6
.
Click an entry in the B tree control.
1
7
.
Click an entry in the M1 tree control.
18
.
Click an entry in the Strawberries tree control.
1
9
.
Click the S00287 tree item.
Page 314
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 321/499
Training GuideOracle EBS R12 Inventory
Step Action
2
0
.
Click the Tools menu.
or
Press [Alt+T].
2
1
.
Click the Grade Update menu.
or
Press [G].
2
2
.
The Grade Update Details page enables you to update the grade of a lot. You enter
the new grade and the reason for the change. When you change the grade, it changes
the grade for the entire lot.
Page 315
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 322/499
Training GuideOracle EBS R12 Inventory
Step Action
2
3
.
Click in the To Grade field.
2
4
.
Enter the desired information into the To Grade field. Enter "A".
2
5.
Enter the desired information into the Reason field. Enter "Inspected".
2
6
.
Click the Update button.
or
Press [Alt+U].
2
7
.
Click the OK button.
or
Press [Alt+O].
2
8.
You have completed the Updating a Grade procedure.
End of Procedure.
Performing a Status Update
Use the Status Update Details page to update material status details.
In this example, you will update a status.
Procedure
Page 316
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 323/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Query Material page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the On-hand Quantity link.
5
.
Use the Query Material page to enter search criteria that determines what appears on
the Material Workbench page.
Page 317
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 324/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Query field.
7
.
The Material Workbench page provides you with information about the material in
your organization.
Page 318
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 325/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click an entry in the Organization tree control.
9
.
Click an entry in the M1 tree control.
1
0.
Click an entry in the On-hand tree control.
1
1
.
Click the Defective tree item.
12
.
Click the Tools menu.
or
Press [Alt+T].
Page 319
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 326/499
Training GuideOracle EBS R12 Inventory
Step Action
1
3
.
Click the Status Update menu.
or
Press [S].
1
4
.
Use the Status Update Details page to change the material status control for the
subinventory, lot, locator, or serial. If you do not enable lot control or serial control for
the item, then you cannot update the lot or serial status. If the subinventory is not under
locator control, then you cannot update the locator status.
1
5
.
This is the material status that you want to apply to the subinventory. When you apply
the change, then the transactions that apply to this material status will apply to this
subinventory.
Step Action
1
6.
Click in the Status field.
Page 320
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 327/499
Training GuideOracle EBS R12 Inventory
Step Action
1
7
.
Enter the desired information into the Status field. Enter "Quarantine".
1
8
.
This is the transaction reason associated with why you want to apply the material status
change.
1
9
.
Click in the Reason field.
20
.
Enter the desired information into the Reason field. Enter "Inspected".
2
1
.
Click the Update button.
or
Press [Alt+U].
2
2
.
Click the OK button.
or
Press [Alt+O].
2
3
.
You have now completed the Performing a Status Update procedure.
End of Procedure.
Performing a Mass Move
You can use the Material Workbench page to mass move the entire quantity of an item from
one subinventory to another subinventory.
In this example, you will move an item.
Page 321
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 328/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Query Material page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4.
Click the On-hand Quantity link.
5
.
Use the Query Material page to enter search criteria that determines what appears on
the Material Workbench page.
Page 322
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 329/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Item / Revision field.
7
.
Click the Find button.
or
Press [Alt+n].
8.
The Material Workbench page provides you with information about the material inyour organization.
Page 323
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 330/499
Training GuideOracle EBS R12 Inventory
Step Action
9
.
Point to the Organizations object.
1
0
.
Click an entry in the Organizations tree control.
11
.
Click an entry in the M1 tree control.
1
2
.
Click an entry in the On-hand tree control.
1
3
.
Click an entry in the FGI tree control.
Page 324
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 331/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Click the AS18947 tree item.
1
5
.
Click the Tools menu.
or
Press [Alt+T].
1
6
.
Click the Mass Move menu.
or
Press [o].
1
7
.
Use the Destination Details page to enter the destination subinventory information.
Page 325
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 332/499
Training GuideOracle EBS R12 Inventory
Step Action
1
8
.
Click in the Subinventory field.
1
9
.
Enter the desired information into the Subinventory field. Enter "Stores".
20
.
Click the OK button.
or
Press [Alt+O].2
1
.
Click the OK button.
or
Press [Alt+O].
2
2
.
Use the Move Orders page to approve the mass move. A move order is a formal
request for the movement of material within a single organization.
Page 326
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 333/499
Training GuideOracle EBS R12 Inventory
Step Action
2
3
.
Click in the Number field.
2
4
.
Click the horizontal scrollbar.
2
5
.
Click the Approve button.
or
Press [Alt+A].
26
.
You have completed the Performing a Mass Move procedure.End of Procedure.
Page 327
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 334/499
Training GuideOracle EBS R12 Inventory
Performing a Mass Issue
You can use the Material Workbench page to generate a move order to mass issue the entirequantity of an item out of a subinventory.
In this example, you will mass issue an item out of inventory.
Procedure
Step Action
1
.
Begin by navigating to the Query Material page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
Page 328
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 335/499
Training GuideOracle EBS R12 Inventory
Step Action
4
.
Click the On-hand Quantity link.
5.
Use the Query Material page to enter search criteria that determines what appears onthe Material Workbench page.
Step Action
6
.
Click the Find button.
or
Press [Alt+n].
Page 329
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 336/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
Click the Tools menu.
or
Press [Alt+T].
8
.
Click the Mass Issue menu.
or
Press [I].
9
.
Use the Destination Details page to enter the GL account to which you want to charge
the issue.
Page 330
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 337/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
Click in the Account field.
1
1
.
Enter the desired information into the Account field. Enter "01-580-7740-0000-000".
1
2
.
Click the OK button.
or
Press [Alt+O].
13
.
Click the OK button.
or
Press [Alt+O].
Page 331
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 338/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Use the Move Orders page to approve the requisition the mass issue created. Notice
that the primary quantity appears automatically.
Step Action
1
5
.
Click the Approve button.
or
Press [Alt+A].
16
.
You have completed the Performing a Mass Issue procedure.End of Procedure.
Page 332
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 339/499
Training GuideOracle EBS R12 Inventory
Creating Reservations
A reservation is a link between a supply source and a demand source. You use the Item
Reservation page to create a permanent link between a supply source and a demand source, and
represents a guaranteed allotment of material to a specified demand source.
In this example, you will create a reservation for a sales order.
Procedure
Step Action
1
.
Begin by navigating to the Find Reservations page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
Page 333
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 340/499
Training GuideOracle EBS R12 Inventory
Step Action
4
.
Click the Reservations link.
5.
Use the Find Reservations page to search for existing reservations. You also use this page to begin a new reservation.
Step Action
6
.
Click the New button.
or
Press [Alt+N].7
.
Use the Item Reservations page to create new reservations. Item reservations prevent
the allocation of material you previously set aside for a sales order, or other sources.
You cannot create reservations against items with a non-reservable material status.
You also cannot create a reservation that causes on-hand quantity to be negative.
Page 334
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 341/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Sales Order field.
9
.
Enter the desired information into the Demand Header field. Enter
"64608.Mixed.ORDER ENTRY".
1
0.
Click in the Line field.
1
1
.
Enter the desired information into the Demand Line field. Enter "1.1".
12
.
When you click in the Organization field, the sales order information appearsautomatically.
1
3
.
Click in the Organization field.
Page 335
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 342/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Click in the Quantity field.
1
5
.
Enter the desired information into the Reservation Quantity field. Enter "30".
1
6
.
Click the Supply tab.
17
.
You can create reservations for different supply types such as on-hand inventory, purchase orders, internal requisitions, and other sources. If you create reservations
against on-hand inventory, then there are two types of reservations, high-level
reservations and low level reservations. High level reservations contain information
about the item and the organization. Low level reservations contain more detailed
information about the item such as the revision, lot, subinventory, serial, and locator.
1
8
.
You can create a unique name to identify the reservation
1
9
.
Click in the Name field.
2
0
.
Enter the desired information into the Name field. Enter "Sales Order 64608".
2
1
.
Click the Save button.
2
2
.
You have completed the Creating Reservations procedure.
End of Procedure.
Viewing Status Information
You can use the Material Workbench page to view material status information.
In this example, you will view the material status for a subinventory.
Page 336
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 343/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Query Material page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the On-hand Quantity link.
5
.
Use the Query Material page to enter the search criteria which determines the
information that appears on the Material Workbench page.
Page 337
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 344/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the Find button.
or
Press [Alt+n].
7
.
Use the Material Workbench page to view information about material in your
organization.
Page 338
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 345/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click an entry in the Organization tree control.
9
.
Click an entry in the M1 tree control.
1
0.
Click an entry in the On-hand tree control.
1
1
.
Click the FGI tree item.
12
.
Click the Status button.
or
Press [Alt+S].
Page 339
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 346/499
Training GuideOracle EBS R12 Inventory
Step Action
1
3
.
Use the Effective Status page to view the material status for the subinventory, locator,
lot, or serial. You can view the effective status only for on-hand quantity.
Step Action
1
4
.
Click in the Subinventory Status field.
1
5
.
You have completed the Viewing Status Information procedure.
End of Procedure.
Page 340
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 347/499
Training GuideOracle EBS R12 Inventory
Move OrdersMove Orders are formal requests for the movement of material within an organization. They
allow planners and facility managers to request the movement of material within a warehouse or
facility for purpose like replenishment, material shortage relocations, and quality handling. You
can generate move orders either manually or automatically depending on the source type you use.
Upon completion of this lesson, you will be able to:
• Define pick slip-grouping rules.
• Set up move orders.
• Generate move order requisitions.
• Generate replenishment move orders.
• Allocate and transact move orders.
Defining Pick Slip Grouping Rules
You can create pick slip grouping rules to organize how picking lines for released sales ordersand manufacturing tasks are grouped on pick slips.
In this example, you will create a pick slip grouping rule based on order number and customer.
Procedure
Page 341
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 348/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Pick Slip Grouping Rules page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4.
Click the Setup: Pick Slip Grouping link.
5
.
Use the Pick Slip Grouping Rules page to create rules to organize how picking lines
for released sales orders and manufacturing tasks are grouped on a pick slip.
Page 342
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 349/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Rule Name field.
7.
Enter the desired information into the Rule Name field. Enter "Order Pick ".
8
.
When you select this check box, all items with the same order number are assigned to
the same pick slip number.
9
.
Click the Order Number option.
1
0
.
When you select this check box, orders for this customer are assigned to the same pick
slip number.
1
1
.
Click the Customer option.
1
2
.
Click the Save button.
1
3.
You have completed the Defining Pick Slip Grouping Rules procedure.
End of Procedure.
Allocating and Transacting Move Orders
After a move order has been approved, you must allocate the move order lines and then transact
the move order to complete the transfer of items to the destination sunbonnet.
In this example, you will allocate and transact a move order.
Procedure
Page 343
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 350/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Move Order Lines page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Transact Move Orders link.
5
.
Use the Move Order Lines page to find the move orders you need to transact.
Page 344
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 351/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Low Order Number field.
7
.
Enter the desired information into the Low Order Number field. Enter "1242".
8
.
Click the Find button.
or
Press [Alt+i].
9
.
Use the Transact Move Orders page to allocate and transact entire move orders and
to view move order information.
Page 345
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 352/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
Click the Select option.
1
1
.
Click the View/Update Allocations button.
or
Press [Alt+U].
1
2
.
Use the Transact Move Order Line Allocations page to view information about
individual lines on your move orders. You can view the item and subinventory
information, the requested quantity, and the allocated quantity. You can also transact
the move order line from this page.
Page 346
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 353/499
Training GuideOracle EBS R12 Inventory
Step Action
1
3
.
Click the Select Available Inventory button.
or
Click the Select Available Inventory button.
1
4
.
The Select Available Inventory page displays available inventory that meets the
demand the move order requires.
Page 347
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 354/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Click in the Selected Transaction Qty field.
1
6
.
Enter the desired information into the Selected Transaction Qty field. Enter "1".
1
7
.
Click the Done button.
or
Press [Alt+n].
Page 348
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 355/499
Training GuideOracle EBS R12 Inventory
Step Action
1
8
.
Click the Transact button.
or
Press [Alt+n].
Page 349
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 356/499
Training GuideOracle EBS R12 Inventory
Step Action
1
9
.
Click the OK button.
or
Press [Alt+O].
2
0
.
You have completed the Allocating and Transacting Move Orders procedure.
End of Procedure.
Generating Move Order Requisitions
Use the Move Orders page to manually create new move orders.
In this example, you will generate a move order requisition.
Procedure
Page 350
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 357/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Move Orders page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Use the Move Orders page to manually generate move order requisitions.
Page 351
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 358/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Click in the Number field.
6
.
Enter the desired information into the Number field. Enter "1234".
7
.
Click in the Description field.
8
.
Enter the desired information into the Description field. Enter "Transfer to Staging".
9
.
Click in the Transaction Type field.
1
0
.
Enter the desired information into the Transaction Type field. Enter "Move Order
Transfer".
Page 352
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 359/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Click in the Source Subinv field.
1
2
.
Enter the desired information into the Source Subinv field. Enter "FGI".
1
3
.
Click in the Destination Subinv field.
14
.
Enter the desired information into the Destination Subinv field. Enter "Staging1".
1
5
.
Click in the Item field.
1
6
.
Enter the desired information into the Item field. Enter "AS10000".
1
7.
If you entered a Transaction Type, a Source Subinventory, or a Destination
Subinventory in the Default alternative region, this information appears automaticallywhen you click in the Transaction Type field.
1
8
.
Click in the Transaction Type field.
1
9
.
Click the On Hand button.
or
Press [Alt+O].
Page 353
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 360/499
Training GuideOracle EBS R12 Inventory
Step Action
2
0
.
Click the Availability button.
or
Press [Alt+i].
2
1.
Use the Availability page to verify that you have enough material in your subinventory
to generate your move order requisition.
Page 354
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 361/499
Training GuideOracle EBS R12 Inventory
Step Action
2
2
.
Click the menu.
or
Press [Alt+-].
Page 355
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 362/499
Training GuideOracle EBS R12 Inventory
Step Action
2
3
.
Click the Close menu.
or
Press [C].
Page 356
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 363/499
Training GuideOracle EBS R12 Inventory
Step Action
2
4
.
Click the menu.
or
Press [Alt+-].
Page 357
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 364/499
Training GuideOracle EBS R12 Inventory
Step Action
2
5
.
Click the Close menu.
or
Press [C].
Page 358
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 365/499
Training GuideOracle EBS R12 Inventory
Step Action
2
6
.
Click the horizontal scrollbar.
2
7
.
Click in the Primary Quantity field.
2
8
.
Enter the desired information into the Primary Quantity field. Enter "15".
2
9
.
Click the Source tab.
3
0
.
Use the Source tab to enter the source subinventory information if you did not enter it
in the Default alternative region. You can also enter the lot, and locator information if
desired.
Page 359
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 366/499
Training GuideOracle EBS R12 Inventory
Step Action
3
1
.
Click the Destination tab.
3
2
.
Use the Destination tab to enter the destination subinventory information if you did
not enter it in the Default alternative region.
3
3
.
Click the Approve button.
or
Press [Alt+A].
34
.
You have completed the Generating Move Order Requisitions procedure.End of Procedure.
Page 360
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 367/499
Training GuideOracle EBS R12 Inventory
Planning and ReplenishmentPlanning and Replenishment involves answering two questions: When should you place a new
order, and how much should your order?
Upon completion of this lesson, you will be able to do:• Summarize demand detail.
• Define a forecast rule.
• Generate a forecast.
• Enter and reload item safety stocks.
• Define kanban pull sequences.
• Generate kanban cards.
• Define kanban cards.
• Print kanban cards.
• Replenish kanban cards.• Enter and process replenishment counts.
• Purge replenishment counts.
Replenishing Kanban Cards
When a kanban card is empty, you can replenish it systematically. This will change the card
status to empty and trigger the necessary transactions to refill the kanban. You can however,
trigger kanban replenishment manually.
In this example, you will manually trigger kanban replenishment.
Procedure
Page 361
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 368/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Kanban Cards page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Kanban: Kanban Cards link.
5
.
Use the Find Kanban Cards page to search for existing kanban cards.
Page 362
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 369/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Item field.
7
.
Enter the desired information into the Item field. Enter "AS18947".
8
.
Click the Find button.
or
Press [Alt+i].
9
.
Use the Kanban Cards Summary page to define and replenish kanban cards.
Page 363
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 370/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
Click the Replenish button.
or
Press [Alt+R].
1
1
.
You have completed the Replenishing Kanban Cards procedure.
End of Procedure.
Purging Replenishment Counts
Use the Purge Replenishment Counts page to purge old replenishment counts.
In this example, you will purge a replenishment count.
Procedure
Page 364
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 371/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Purge Replenishment Counts page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Replenishment Counts: Purge link.
5
.
When you navigate to the Purge Replenishment Counts page, the Parameters page
automatically appears. Use the Parameters page to enter the processing mode, the
count name, and to indicate if you would like to purge a replenishment that did not process due to error.
Page 365
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 372/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Processing Mode REQUIRED field.
7
.
Enter the desired information into the Processing Mode REQUIRED field. Enter
"Concurrent processing".
8
.
Click in the Count Name REQUIRED field.
9
.
Enter the desired information into the Count Name REQUIRED field. Enter
"replen_fin".
1
0
.
Click in the Delete Errored Counts REQUIRED field.
1
1
.
Enter the desired information into the Delete Errored Counts REQUIRED field.
Enter "Yes".
Page 366
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 373/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click the OK button.
or
Press [Alt+O].
1
3
.
Use the Purge Replenishment Counts page to submit the concurrent request.
1
4
.
Click the Submit button.
or
Press [Alt+m].
1
5
.
Click the Yes button.
or
Press [Alt+Y].
1
6
.
You have completed the Purging Replenishment Counts procedure.
End of Procedure.
Printing Kanban Cards
Use the Print Kanban Cards page to batch print kanban cards with the card status Active and
Hold.
In this example, you will print kanban cards.
Procedure
Page 367
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 374/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Print Kanban Cards page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Kanban: Print Kanban Cards link.
5
.
Use the Parameters page to restrict the parameters for which you want to print kanban
cards.
Page 368
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 375/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Subinventory field.
7
.
Enter the desired information into the Subinventory field. Enter "FGI".
8
.
Click in the Source Type field.
9
.
Enter the desired information into the Source Type field. Enter "Supplier".
1
0
.
Point to the OK object.
1
1
.
Click the OK button.
or
Press [Alt+O].
Page 369
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 376/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Use the Print Kanban Cards page to submit your request to print kanban cards.
1
3
.
Click the Submit button.
or
Press [Alt+m].
1
4
.
Click the No button.
or
Press [Alt+N].
1
5
.
You have completed the Printing Kanban Cards procedure.
End of Procedure.
Generating Kanban Cards
Use the Generate Kanban Cards page to generate kanban cards.
In this example, you will generate kanban cards.
Procedure
Page 370
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 377/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Generate Kanban Cards page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Kanban: Generate Kanban Cards link.
5
.
When you navigate to the Generate Kanban Cards page, the System Items page,
automatically appears. This enables you enter the item for which you want to generate
kanban cards.
Page 371
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 378/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Item: Low field.
7
.
Enter the desired information into the Item: Low field. Enter "AS54888".
8
.
Click the OK button.
or
Press [Alt+O].
9
.
Use the Parameters page to restrict kanban card generation to a certain selection of
criteria.
10
.
Click in the Subinventory field.
1
1
.
Enter the desired information into the Subinventory field. Enter "FGI".
Page 372
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 379/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click in the Source Type field.
1
3
.
Enter the desired information into the Source Type field. Enter "Intra Org".
1
4
.
Click the OK button.
or
Press [Alt+O].
15
.
Click the Submit button.
or
Press [Alt+m].
1
6
.
Click the No button.
or
Press [Alt+N].
1
7
.
You have completed the Generating Kanban Cards procedure.
End of Procedure.
Entering and Reloading Item Safety Stocks
Use the Enter Item Safety Stock page to enter the floor or base level of inventory from whichOracle Inventory performs all planning. In other words, the item is planned as if the safety stock
quantity for the period is the zero inventory balance of the item. This ensures that the safety stock
quantity remains in inventory to cover any fluctuations in demand.
In this example, you will set the safety stock quantity for item AS54888 for 500.
Page 373
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 380/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Find Item Safety Stocks page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4.
Click the Planning: Safety Stocks link.
5
.
Use the Find Item Safety Stocks page to search for existing safety stock information,
or to enter new safety stock information.
Page 374
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 381/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
Use the enter Item Safety Stocks page to enter safety stock.
Page 375
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 382/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Item field.
9
.
Enter the desired information into the Item field. Enter "AS54888".
1
0.
Click in the Effective Date field.
1
1
.
Enter the desired information into the Effective Date field. Enter "03-APR-2008".
12
.
Click in the Quantity field.
1
3
.
Enter the desired information into the Quantity field. Enter "500".
Page 376
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 383/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Click the Save button.
1
5
.
You have completed the Entering and Reloading Item Safety Stocks procedure.
End of Procedure.
Entering and Processing Replenishment Counts
You can enter counts to replenish subinventories. You can specify how the subinventories are
replenished by determining how requisitions are generated.
In this example, you will run a replenishment count.
Procedure
Page 377
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 384/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Replenishment Count Headers page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Counts link.
5
.
Use the Find Replenishment Count Headers page to create new replenishment
counts.
Step Action
6
.
Click the New button.
Page 378
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 385/499
Training GuideOracle EBS R12 Inventory
Step Action
or
Press [Alt+N].
7
.
Use the Replenishment Count Headers page to generate requisitions or move orders
to replenish inventory. You enter the name of the replenishment, and the subinventoryto be replenished. The souring information is pulled from information you previously
specified.
Step Action
8
.
Click in the Name field.
9
.
Enter the desired information into the Name field. Enter "Finreplen".
1
0
.
Click in the Subinventory field.
Page 379
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 386/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Enter the desired information into the Subinventory field. Enter "Fingood".
1
2
.
You must click in to another field for the Default Items and Default Lines buttons to
be enabled.
1
3
.
Click in the Default Deliver To field.
14
.
Click the Lines button.
or
Press [Alt+i].
1
5
.
Use the Replenishment Count Lines page to enter item and quantity information for
your replenishment count.
Page 380
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 387/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Click in the Item field.
1
7
.
Enter the desired information into the Item field. Enter "AS54888".
18
.
Click in the Quantity field.
1
9.
Enter the desired information into the Quantity field. Enter "75".
2
0
.
Click the button.
Page 381
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 388/499
Training GuideOracle EBS R12 Inventory
Step Action
2
1
.
Click the Process and Report button.
or
Press [Alt+c].
2
2
.
Click the OK button.
or
Press [Alt+O].
2
3.
You have now completed the Entering and Processing Replenishment Counts
procedure.End of Procedure.
Defining Kanban Pull Sequences
A pull sequence is a group of information that defines a kanban location source information an
planning parameters for an item.
In this example, you will define a kanban pull sequence.
Procedure
Page 382
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 389/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Pull Sequence Summary page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Kanban: Pull Sequences link.
5
.
Use the Find Pull Sequence page to search for existing pull sequences or to create
new pull sequences.
Page 383
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 390/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
Use the Pull Sequence Summary page to define a kanban pull sequence.
Page 384
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 391/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Item field.
9
.
Enter the desired information into the Item field. Enter "AS54888".
1
0.
The Source Type is the source of the material from you replenish.
1
1
.
Click the Source Type list.
Page 385
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 392/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click the Intra Org list item.
1
3
.
This is the Subinventory to replenish.
Page 386
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 393/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Click in the Subinventory field.
1
5
.
Enter the desired information into the Subinventory field. Enter "FGI".
1
6
.
Click the horizontal scrollbar.
1
7
.
Click in the Source Subinventory field.
1
8
.
Enter the desired information into the Source Subinventory field. Enter "Stores".
Page 387
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 394/499
Training GuideOracle EBS R12 Inventory
Step Action
1
9
.
Click the Kanban tab.
2
0
.
Click in the Number of Cards field.
2
1
.
Enter the desired information into the Number of Cards field. Enter "10".
22
.
Click the Save button.
2
3
.
You have completed the Defining Kanban Pull Sequences procedure.
End of Procedure.
Defining Kanban Cards
Procedure
Page 388
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 395/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Find Kanban Cards page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Kanban: Kanban Cards link.
5
.
Use the Find Kanban Cards page to find existing find exiting kanban cards and to
create new kanban cards.
Page 389
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 396/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
Use the Kanban Cards Summary page to view, define, and update kanban cards.
Page 390
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 397/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Item field.
9
.
Enter the desired information into the Item field. Enter "AS18947".
1
0.
Click in the Subinventory field.
1
1
.
Enter the desired information into the Subinventory field. Enter "Stores".
12
.
If select Replenishable, this means that you can reuse the kanban card.
1
3
.
Click the Replenishable option.
Page 391
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 398/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Click the Source tab.
1
5
.
Click the Source Type list.
Step Action
1
6
.
Click the Intra Org list item.
Page 392
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 399/499
Training GuideOracle EBS R12 Inventory
Step Action
1
7
.
Click the horizontal scrollbar.
1
8
.
Click in the Subinventory field.
1
9
.
Enter the desired information into the Subinventory field. Enter "FGI".
2
0
.
Click the Save button.
2
1
.
You have completed the Defining Kanban Cards procedure.
End of Procedure.
Page 393
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 400/499
Training GuideOracle EBS R12 Inventory
Summarizing Demand Detail
Use the Demand History page to display the demand history by item and by date.
In this example, you will view the demand detail for an item.
Procedure
Step Action
1
.
Begin by navigating to the Find Demand History Items page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
Page 394
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 401/499
Training GuideOracle EBS R12 Inventory
Step Action
4
.
Click the Planning: Demand History link.
5.
Use the Find Demand History Items page to enter search criteria to query items for which you want to summarize demand.
6
.
When you click in the Items field the System Items page appears automatically and
prompts you to enter the item information.
Step Action
7
.
Click in the Items field.
8
.
Click in the Item: Low field.
9
.
Enter the desired information into the Item: Low field. Enter "AS18947".
Page 395
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 402/499
Training GuideOracle EBS R12 Inventory
Step Action
1
0
.
When you click in the Item: High field the item information that you entered in the
Item: Low field appears automatically. You can modify this as necessary.
1
1
.
Click in the Item: High field.
1
2
.
Click the OK button.
or
Press [Alt+O].
13
.
Click the Find button.
or
Press [Alt+i].
1
4
.
Use the Demand History Items page to determine the bucket size for demand history
summarization. If you want demand history by day, week, and by month, you must
compile each bucket type.
1
5.
If you choose to compile by period, the system compiles by manufacturing calendar
periods. It compiles for the past 260 previously monthly periods. The type of period isdetermined by the organization calendar you defined in the Defined Calendar page.
Page 396
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 403/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Click the History 1 button.
or
Press [Alt+s].
1
7.
The Demand History page displays the demand history by item and by date. It shows
the sales order shipments, interorganization transfers, miscellaneous issues, and issuesto wip.
1
8
.
You have completed the Summarizing Demand Detail procedure.
End of Procedure.
Page 397
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 404/499
Training GuideOracle EBS R12 Inventory
Cost Accounting and ControlOracle Inventory provides the features you need to summarize costs related to inventory and
manufacturing activities for a given accounting period and distributes these costs to the general
ledger.
Upon completion of this lesson, you will be able to maintain accounting periods.
Maintaining Accounting Periods
Use the Inventory Accounting periods page to open and close accounting periods.
In this example, you will open a future accounting period.
Procedure
Step Action
1
.
Begin by navigating to the Inventory Accounting Periods page
Click the vertical scrollbar.
Page 398
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 405/499
Training GuideOracle EBS R12 Inventory
Step Action
2
.
Click the Inventory link.
3.
Click the vertical scrollbar.
4
.
Click the Inventory Accounting Periods link.
5
.
Use the Inventory Accounting Periods page to open inventory accounting periods.
Step Action
6
.
Click in the Status field.
7
.
Click the Change Status... button.
Page 399
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 406/499
Training GuideOracle EBS R12 Inventory
Step Action
or
Press [Alt+C].
8
.
Click the OK button.
or
Press [Alt+O].
9
.
You do not have to save your work for the status change to take effect.
1
0.
You have completed the maintaining accounting periods procedure.
End of Procedure.
Page 400
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 407/499
Training GuideOracle EBS R12 Inventory
ABC AnalysisAn ABC analysis determines the relative value of a group of inventory items based on valuation
criteria you specify. ABC refers to rankings you assign to your items because of this analysis
where A items are ranked higher than B items and so on.
You can optionally use the ABC analyses you compile to drive your cycle counts where you
might count items of high value (A items) very frequently, and items of lower value less
frequently.
Up on completion of this lesson you will be able to:
• Define and run an ABC compile.
• Define an ABC classes.
• Define ABC assignment groups.
• Define ABC item assignments.• Update ABC item assignments.
• Purge ABC item information.
Purging ABC Information
You can submit a concurrent request to purge either ABC assignment groups or ABC compile
information.
In this example, you will submit a request to purge an ABC assignment group.
Procedure
Page 401
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 408/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the ABC Assignment Groups page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the ABC Assignment Groups link.
5
.
Use the ABC Assignment Groups page to submit a concurrent request to purge ABC
assignment group information. When you submit the concurrent request, it will delete
all items and class assignments associated with the group.
Page 402
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 409/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Group Name field.
7
.
Click the Tools menu.
or
Press [Alt+T].
8.
Click the Purge Group menu.
9
.
Click the OK button.
or
Press [Alt+O].
1
0
.
Click the OK button.
or
Press [Alt+O].
Page 403
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 410/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
You have completed the Purging ABC information procedure.
End of Procedure.
Defining and Running an ABC Compile
You can define and compile an ABC analysis for your entire organization or for a specific
subinventory within your organization.
In this example, you will define an ABC compilation for your organization.
Procedure
Step Action
1
.
Begin by navigating to the ABC Compiles page.
Click the vertical scrollbar.
Page 404
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 411/499
Training GuideOracle EBS R12 Inventory
Step Action
2
.
Click the Inventory link.
3.
Click the vertical scrollbar.
4
.
Click the ABC Codes: ABC Compiles link.
5
.
Use the ABC Compiles page to create a new ABC compile.
Step Action
6
.
Click the New button.
or
Press [Alt+N].
Page 405
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 412/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
Use the Define ABC Compile page to enter ABC compilation criteria.
Step Action
8
.
Click in the Compile Name field.
9
.
Enter the desired information into the Compile Name field. Enter "SeattleCompile".
1
0.
Click in the Description field.
1
1
.
Enter the desired information into the Description field. Enter "ABC Compile for the
Seattle Org".
Page 406
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 413/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click in the Criterion field.
1
3
.
Use the Criterion field to define what the rank of a particular item will be in the ABC
compile. For example, if you use Current on-hand quantity as the your compile
criterion, then an item with an on-hand quantity of 10 unites is of higher rank than
another item with a quantity of 5 units.
1
4
.
Enter the desired information into the Criterion field. Enter "Current on hand
quantity".
15
.
Click the Save button.
1
6
.
Click the Compile button.
or
Press [Alt+C].
1
7
.
Click the OK button.
or
Press [Alt+O].
1
8
.
Click the Yes button.
or
Press [Alt+Y].
1
9
.
Click the OK button.
or
Press [Alt+O].
Page 407
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 414/499
Training GuideOracle EBS R12 Inventory
Step Action
2
0
.
You have completed the Defining and Running an ABC Compile procedure.
End of Procedure.
Defining ABC Item Assignments
When you define ABC assignment you specify the cutoff point for each ABC class. Each ABC
class must have at least one item assigned to it, and all items in the ABC compile must be
assigned to an ABC class.
In this example, you will define ABC item assignments.
Procedure
Page 408
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 415/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Assign ABC Items page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Assign Items link.
5
.
Use the Assign ABC Items page to specify the cutoff point for each ABC class. You
can enter the sequence number, the inventory value, or the % items from the ABC
Descending Value Report for the last item to be included in each ABC class.
Step Action
6
.
Click in the ABC Group field.
Page 409
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 416/499
Training GuideOracle EBS R12 Inventory
Step Action
7
.
Enter the desired information into the ABC Group field. Enter "OnHandABC".
8.
Click the Find button.
or
Press [Alt+i].
9.
If you choose to enter %Items, the system rounds the numbers as necessary. The restof the item information also appears automatically when you enter information in one
of the fields.
1
0
.
Click in the Items field.
1
1
.
Enter the desired information into the Items field. Enter "5".
1
2
.
Click in the Items field.
1
3
.
Enter the desired information into the Items field. Enter "10".
14
.
Click in the Items field.
1
5
.
Enter the desired information into the Items field. Enter "20".
1
6.
Click in the Items field.
1
7.
Enter the desired information into the Items field. Enter "20".
Page 410
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 417/499
Training GuideOracle EBS R12 Inventory
Step Action
1
8
.
Click in the Items field.
1
9
.
Enter the desired information into the Items field. Enter "25".
2
0
.
Click in the Items field.
21
.
Enter the desired information into the Items field. Enter "30".
2
2
.
Click in the Items field.
2
3
.
Click the Assign button.
or
Press [Alt+n].
24
.
Click the OK button.
or
Press [Alt+O].
2
5
.
You have completed the Defining ABC Item Assignments procedure.
End of Procedure.
Defining ABC Classes
You use ABC classes to identify the value grouping to which your items belong. You use your
own terminology to define these classes. For example, you might define classes A, B, and C.
In this example, you will define three ABC classes.
Page 411
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 418/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the ABC Classes page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4.
Click the ABC Codes: ABC Classes link.
5
.
Use the ABC Classes page to create new ABC classes. You can use ABC classes to
group items for a cycle count where you count higher value items more frequently than
medium and lower value items. You can also use ABC classes to group items for
planning purposes.
Page 412
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 419/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Class Name field.
7
.
Enter the desired information into the Class Name field. Enter "Highest".
8
.
Click in the Description field.
9
.
Enter the desired information into the Description field. Enter "Highest Value Items".
1
0
.
Click in the Class Name field.
Page 413
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 420/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Enter the desired information into the Class Name field. Enter "Medium".
1
2
.
Click in the Description field.
1
3
.
Enter the desired information into the Description field. Enter "Medium Value
Items".
14
.
Click in the Class Name field.
1
5
.
Enter the desired information into the Class Name field. Enter "Lowest".
1
6
.
Click in the Description field.
1
7.
Enter the desired information into the Description field. Enter "Lowest Value Items".
1
8
.
Click the Save button.
1
9
.
You have completed the Defining ABC Classes procedure.
End of Procedure.
Defining ABC Assignment Groups
ABC assignment groups link a particular ABC compile with a valid set of ABC classes.
In this example, you will assign ABC classes to a valid ABC compile.
Page 414
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 421/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the ABC Assignment Groups page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4.
Click the ABC Assignment Groups link.
5
.
Use the ABC Assignment Groups page to create and ABC assignment group and
associate it with an ABC compile.
Page 415
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 422/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Group Name field.
7
.
Enter the desired information into the Group Name field. Enter "onhandquantity".
8
.
Click in the Compile Name field.
9
.
Enter the desired information into the Compile Name field. Enter "SeattleCompile".
1
0
.
When you click in the Valuation Scope field the valuation scope appears
automatically.
1
1
.
Click in the Valuation Scope field.
Page 416
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 423/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click the Group Classes button.
or
Press [Alt+p].
1
3
.
Use the ABC Group Class Assignment page to associate ABC class with an ABC
assignment group and an ABC compile.
Step Action
14
.
Click in the Class Name field.
1
5.
Enter the desired information into the Class Name field. Enter "Highest".
Page 417
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 424/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Click in the Class Name field.
1
7
.
Enter the desired information into the Class Name field. Enter "Medium".
1
8
.
Click in the Class Name field.
19
.
Enter the desired information into the Class Name field. Enter "Lowest".
2
0
.
Click the Save button.
2
1
.
You have completed the Defining ABC Assignment Groups procedure.
End of Procedure.
Updating ABC Item Assignments
If you are not satisfied with the class into which an item falls as a result of the automatic ABC
assignment process you can change it.
In this example, you will update ABC item assignments.
Procedure
Page 418
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 425/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Update ABC Item Assignments page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Update Item Assignments link.
5
.
Use the Update ABC Item Assignments page to change the ABC item class.
Page 419
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 426/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the ABC Group field.
7
.
Enter the desired information into the ABC Group field. Enter "M1_DAILY".
8
.
Click the Find button.
or
Press [Alt+i].
9
.
Click the Yes button.
or
Press [Alt+Y].
1
0
.
Click in the ABC Class field.
Page 420
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 427/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Press [Backspace].
1
2
.
Enter the desired information into the ABC Class field. Enter "Class B".
1
3
.
Click in the ABC Class field.
14
.
Press [Backspace].
1
5
.
Enter the desired information into the ABC Class field. Enter "Class C".
1
6
.
Click the Save button.
1
7.
You have completed the Updating ABC Item Assignments procedure.
End of Procedure.
Page 421
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 428/499
Training GuideOracle EBS R12 Inventory
Cycle AccountingCycle counting it the periodic counting of individual items throughout the course of the year to
ensure the accuracy of inventory quantities and values. Accurate system on-hand quantities are
essential for managing supply and demand, maintaining high service levels, and planning
production.
Cycle counting enables you to keep inventory records accurate by correcting errors between the
system on-hand (perpetual) and actual on-hand (physical) quantities. Cycle counting can also be a
valuable tool to help identify patterns in the errors found.
Upon completion of this lesson, you will be able to:
• Define and maintain a cycle count.
• Define cycle count classes.
• Generate automatic schedules.• Enter manual schedule requests.
• Generate count requests.
• Request the cycle count list.• Enter cycle counts.• Approve cycle counts.
• Approve cycle count adjustments.
• Purge cycle count information.
Purging Cycle Count Information
Use the Cycle Counts Summary page to access the Purge Cycle Count Parameters page. You
use this concurrent request to purge cycle count information.
In this example, you will purge cycle count information.
Procedure
Page 422
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 429/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Cycle Counts link.
5
.
Use the Cycle Counts Summary page to query for existing cycle counts.
Page 423
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 430/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Cycle Count field.
7
.
Press [F11].
8
.
Enter the desired information into the Cycle Count field. Enter "OrganizationCount".
9
.
Press [Ctrl+F11].
1
0
.
Click the Tools menu.
or
Press [Alt+T].
1
1
.
Click the Purge Cycle Count menu.
Page 424
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 431/499
Training GuideOracle EBS R12 Inventory
Step Action
or
Press [P].
1
2.
Use the Purge Cycle Count Parameters page launch the concurrent request.
Step Action
1
3
.
Click the OK button.
or
Press [Alt+K].
1
4
.
Click the OK button.
or
Press [Alt+O].
Page 425
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 432/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
You have completed the Purging Cycle Count Information procedure.
End of Procedure.
Generating Count Requests
Use the Generate Count Requests page to submit a concurrent request to perform a cycle count.
In this example, you will submit a concurrent request to perform a cycle count.
Procedure
Step Action
1.
Begin by navigating to the Cycle Counts Summary page.Click the vertical scrollbar.
Page 426
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 433/499
Training GuideOracle EBS R12 Inventory
Step Action
2
.
Click the Inventory link.
3.
Click the vertical scrollbar.
4
.
Click the Cycle Counts link.
Step Action
5
.
Click the Tools menu.
or
Press [Alt+T].
6
.
Click the Perform Full Cycle Count menu.
Page 427
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 434/499
Training GuideOracle EBS R12 Inventory
Step Action
or
Press [F].
7
.
Use the Perform Full Cycle Count page to submit the following concurrent requests:
Generate automatic schedule requests, Generate cycle count requests, and Cycle countlisting.
Step Action
8
.
Click in the Parameters field.
9
.
Use the Parameters page to enter the Cycle count listing parameters.
1
0
.
Click in the Cycle Count Name REQUIRED field.
Page 428
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 435/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Enter the desired information into the Cycle Count Name REQUIRED field. Enter
"OrganizationCount".
1
2
.
Click the OK button.
or
Press [Alt+O].
1
3
.
Click the Submit button.
or
Press [Alt+m].
1
4
.
You have completed the Generating Count Requests procedure.
End of Procedure.
Generating Automatic Schedules
You can use the Cycle Count Summary page to submit automatic schedule requests.
In this example, you will submit an automatic schedule request.
Procedure
Page 429
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 436/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Cycle Counts Summary page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Cycle Counts link.
5
.
Use the Cycle Count Summary page to query for existing cycle count information.
Page 430
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 437/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Press [F11].
7
.
Enter the desired information into the Cycle Count field. Enter "M1_DAILY".
8
.
Press [Ctrl+F11].
9
.
Click the Tools menu.
or
Press [Alt+T].
10
.
Click the Cycle Count Scheduler menu.
or
Press [S].
Page 431
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 438/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Use the Cycle Count Scheduler Parameters page to indicate if you should include
items belonging to the control bring in the list of items for which to generate schedule
requests.
Step Action
1
2
.
Click the Include Control Group Items option.
1
3
.
Click the OK button.
1
4
.
Click the OK button.
or
Press [Alt+O].
Page 432
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 439/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
You have completed the Generating Automatic Schedules procedure.
End of Procedure.
Entering Manual Schedule Requests
You use the Manual Schedule Requests page to manually schedule a count request for an item.
In this example, you will schedule a count request for an item.
Procedure
Step Action
1.
Begin by navigating toe the Manual Schedule Requests page.Click the vertical scrollbar.
Page 433
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 440/499
Training GuideOracle EBS R12 Inventory
Step Action
2
.
Click the Inventory link.
3.
Click the vertical scrollbar.
4
.
Click the Manual Requests link.
5
.
Use the Manual Schedule Requests page to manually add items to a cycle count.
Step Action
6
.
Click in the Cycle Count Name field.
7
.
Enter the desired information into the Cycle Count Name field. Enter
"OrganizationCount".
Page 434
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 441/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Item field.
9.
Enter the desired information into the Item field. Enter "AS54888".
1
0
.
Click in the Subinventory field.
1
1
.
Enter the desired information into the Subinventory field. Enter "FGI".
12
.
Click in the Item field.
1
3
.
Enter the desired information into the Item field. Enter "AS54888".
1
4
.
Click in the Subinventory field.
15
.
Enter the desired information into the Subinventory field. Enter "Stores".
1
6
.
Click in the Item field.
1
7
.
Enter the desired information into the Item field. Enter "AS20000".
1
8
.
Click in the Subinventory field.
Page 435
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 442/499
Training GuideOracle EBS R12 Inventory
Step Action
1
9
.
Enter the desired information into the Subinventory field. Enter "FGI".
2
0
.
Click in the Item field.
2
1
.
Enter the desired information into the Item field. Enter "AS20000".
22
.
Click in the Subinventory field.
2
3
.
Enter the desired information into the Subinventory field. Enter "Stores".
2
4
.
Click the Save button.
2
5.
You have completed the Entering Manual Schedule Requests Procedure.
End of Procedure.
Entering Cycle Counts
You can use the Cycle Count Entries page to enter counts of items requested through automatic
or manual cycle count scheduling. You can also enter unscheduled count entries if they are
allowed for you cycle counts.
In this example, you will enter cycle count quantities in to the system.
Procedure
Page 436
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 443/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Cycle Count Entries page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Cycle Count Entries link.
5
.
Use the Cycle Count Entries page to enter actual on-hand count information.
Page 437
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 444/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Cycle Count field.
7
.
Enter the desired information into the Cycle Count field. Enter "FGICount".
8
.
Click the Find button.
or
Press [Alt+i].
9
.
Click the Yes button.
or
Press [Alt+Y].
1
0
.
Click the Adjustments tab.
Page 438
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 445/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
The Count Quantity is the actual physical quantity that you counted during your cycle
count. The System Quantity is the current on-hand balance in the system.
1
2
.
Click in the Count Quantity field.
1
3
.
Enter the desired information into the Count Quantity field. Enter "330".
14
.
Click in the Count Quantity field.
1
5
.
Enter the desired information into the Count Quantity field. Enter "4000".
1
6
.
Click in the Count Quantity field.
1
7.
Enter the desired information into the Count Quantity field. Enter "150".
1
8
.
Click in the Count Quantity field.
1
9
.
Enter the desired information into the Count Quantity field. Enter "118".
20
.
Click the Save button.
2
1.
You have completed the Entering Cycle Counts procedure.
End of Procedure.
Page 439
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 446/499
Training GuideOracle EBS R12 Inventory
Defining Cycle Count Items
You need to load items in to your cycle count before you can schedule or count them. There are
two methods you can use to do this. The first is to specify an existing ABC group from which to
load your items. The second method is to enter, delete, or update he items you want included or excluded using the Cycle Count Items page.
In this example, you will use the Cycle Count Items page to adds items to your cycle count.
Procedure
Step Action
1.
Begin by navigating to the Cycle Count Summary page.Click the vertical scrollbar.
2
.
Click the Inventory link.
Page 440
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 447/499
Training GuideOracle EBS R12 Inventory
Step Action
3
.
Click the vertical scrollbar.
4.
Click the Cycle Counts link.
5
.
Use the Cycle Counts Summary page to query for existing cycle counts.
Step Action
6
.
Press [F11].
7
.
Enter the desired information into the Cycle Count field. Enter "OrganizationCount".
8
.
Press [Ctrl+F11].
Page 441
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 448/499
Training GuideOracle EBS R12 Inventory
Step Action
9
.
Click the Open button.
or
Press [Alt+O].
Step Action
1
0
.
Point to the Items object.
1
1.
Click the Items button.
or
Press [Alt+I].
Page 442
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 449/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Use the Cycle Count Items page to add items to your cycle count. You select the ABC
class to which the item belongs and optionally associate the positive and negative
quantity variances.
Step Action
1
3
.
Click in the Class Name field.
1
4
.
Enter the desired information into the Class Name field. Enter "Class AA".
1
5
.
Click in the Item field.
Page 443
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 450/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Enter the desired information into the Item field. Enter "AS18947".
1
7
.
Click in the Class Name field.
1
8
.
Enter the desired information into the Class Name field. Enter "Class A".
19
.
Click in the Item field.
2
0
.
Enter the desired information into the Item field. Enter "AS54888".
2
1
.
Click in the Class Name field.
2
2.
Enter the desired information into the Class Name field. Enter "Class B".
2
3
.
Click in the Item field.
2
4
.
Enter the desired information into the Item field. Enter "AS20000".
25
.
Click the Save button.
2
6.
You have completed the Defining Cycle Count Items procedure.
End of Procedure.
Page 444
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 451/499
Training GuideOracle EBS R12 Inventory
Defining Cycle Count Classes
Use the Cycle Count Classes page to assign abc classes your cycle count.
In this example, you will assign abc classes to your cycle count.
Procedure
Step Action
1
.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
Page 445
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 452/499
Training GuideOracle EBS R12 Inventory
Step Action
4
.
Click the Cycle Counts link.
5.
Use the Cycle Count Summary page to query for existing cycle count header information.
Step Action
6
.
Click the View menu.
or
Press [Alt+V].7
.
Click the Query By Example menu.
or
Press [Q].
Page 446
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 453/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click the Enter menu.
or
Press [E].
9
.
Click in the Cycle Count field.
10
.
Enter the desired information into the Cycle Count field. Enter "OrganizationCount".
1
1
.
Click the View menu.
or
Press [Alt+V].
1
2
.
Click the Query By Example menu.
or
Press [Q].
1
3.
Click the Run menu.
or
Press [R].
1
4
.
Click the Open button.
or
Press [Alt+O].
Page 447
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 454/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Click the Classes button.
or
Press [Alt+C].
1
6.
Use the Cycle Count Classes page to determine the ABC classed within an assignment
group to count. You also determine the number of times per year to count the class.You can optionally determine the positive and negative tolerances. If you do not enter
tolerances, then the system uses the tolerances you entered in the Cycle Counts header
information.
Page 448
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 455/499
Training GuideOracle EBS R12 Inventory
Step Action
1
7
.
Click in the Name field.
1
8
.
Enter the desired information into the Name field. Enter "Class AA".
1
9
.
Click in the Counts Per Year field.
2
0
.
Enter the desired information into the Counts Per Year field. Enter "75".
2
1
.
Click in the Name field.
Page 449
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 456/499
Training GuideOracle EBS R12 Inventory
Step Action
2
2
.
Enter the desired information into the Name field. Enter "Class A".
2
3
.
Click in the Counts Per Year field.
2
4
.
Enter the desired information into the Counts Per Year field. Enter "60".
25
.
Click in the Name field.
2
6
.
Enter the desired information into the Name field. Enter "Class B".
2
7
.
Click in the Counts Per Year field.
2
8.
Enter the desired information into the Counts Per Year field. Enter "50".
2
9
.
Click in the Name field.
3
0
.
Enter the desired information into the Name field. Enter "Class C".
31
.
Click in the Counts Per Year field.
3
2
.
Enter the desired information into the Counts Per Year field. Enter "10".
Page 450
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 457/499
Training GuideOracle EBS R12 Inventory
Step Action
3
3
.
Click the Save button.
3
4
.
You have completed the Defining Cycle Classes procedure.
End of Procedure.
Defining and Maintaining a Cycle Count
You use the Cycle Counts page to determine cycle count parameter information. Before you can
enter a cycle count information you must establish the following prerequisites:
• Define an ABC Class
• Define a workday calendar • Compile an ABC analysis
• Create an ABC assignment group
• Define ABC item assignments
In this example, you will determine cycle count header information.
Procedure
Page 451
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 458/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Cycle Counts page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Cycle Counting: Cycle Counts link.
5
.
Use the Cycle Counts Summary page to open exiting cycle counts or initiate a new
cycle count.
Page 452
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 459/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
Use the Cycle Counts page to determine the parameter information for your cycle
count. You use this page to schedule cycle counts, assign abc information, and
determine if you want to count the entire organization or specific subinventories.
Page 453
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 460/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Name field.
9
.
Enter the desired information into the Name field. Enter "OrganizationCount".
1
0.
The Adjustment Account is the general ledger account used to charge cycle count
adjustments.
1
1
.
Click in the Adjustment Account field.
12
.
Enter the desired information into the Adjustment Account field. Enter "01-580-7740-0000-000".
1
3
.
Click in the Inactive On field.
Page 454
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 461/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Enter the desired information into the Inactive On field. Enter "14-Apr-2008".
1
5
.
The Late Days field represents the number of workdays that can pass after you
generated the count request before the request is late.
1
6
.
Click in the Late Days field.
17
.
Enter the desired information into the Late Days field. Enter "2".
1
8
.
When you select Unscheduled Entries, you can enter counts for items not scheduled
to be counted.
1
9
.
Click the Unscheduled Entries option.
2
0.
Click the Display System Qty option.
2
1
.
Click the Automatic Recounts option.
2
2
.
Click in the Maximum field.
23
.
Enter the desired information into the Maximum field. Enter "2".
2
4
.
Click the Specific option.
Page 455
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 462/499
Training GuideOracle EBS R12 Inventory
Step Action
2
5
.
Click in the Subinventory field.
2
6
.
Enter the desired information into the Subinventory field. Enter "FGI".
2
7
.
Click in the Subinventory field.
28
.
Enter the desired information into the Subinventory field. Enter "Stores".
2
9
.
Click in the Subinventory field.
3
0
.
Enter the desired information into the Subinventory field. Enter "RIP".
3
1.
Click the Adjustments and ABC tab.
3
2
.
Use the Adjustments and ABC tab to enter approval tolerances and assign ABC
information to your cycle count.
3
3
.
Click in the Qty Variance field.
34
.
Enter the desired information into the Qty Variance field. Enter "4".
3
5
.
If you entered information in a Tolerances + field, then when you click in the
corresponding Tolerances - field, the information appears automatically.
Page 456
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 463/499
Training GuideOracle EBS R12 Inventory
Step Action
3
6
.
Click in the % field.
3
7
.
Click in the Adjustment Value field.
3
8
.
Enter the desired information into the Adjustment Value field. Enter "2".
39
.
Click in the Cost Tolerance Neg field.
4
0
.
Click in the Hit/Miss Analysis field.
4
1
.
Enter the desired information into the Hit/Miss Analysis field. Enter "2".
4
2.
Click in the % field.
4
3
.
This is the ABC assignment group on which to base the cycle count.
4
4
.
Click in the Group field.
45
.
Enter the desired information into the Group field. Enter "M1_DAILY".
4
6
.
Click the Save button.
Page 457
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 464/499
Training GuideOracle EBS R12 Inventory
Step Action
4
7
.
You have completed the Defining and Maintaining a Cycle Count Procedure.
End of Procedure.
Approving Cycle Count Adjustments
Employees with access to the Count Adjustments Approvals Summary page can query request
the recount of, or approve cycle counts pending approval. When you click Find, you can query all
counts, or only those counts pending approval. You can then approve adjustments, recount an
item in question, reject the count, or take no action.
In this example, you will approve, reject, and request the recount of cycle count items.
Procedure
Page 458
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 465/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Count Adjustment Approvals Summary page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Approve Counts link.
5
.
Use the Count Adjustment Approvals Summary page to approve adjustments held
for approval, to recount an item, or to reject the adjustment. The system uses the
approval tolerances you entered when you defined the cycle count to determine whichcounts need approval.
Page 459
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 466/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Cycle Count field.
7.
Enter the desired information into the Cycle Count field. Enter "FGICount".
8
.
Click the Find button.
or
Press [Alt+i].
9.
Click the Yes button.
or
Press [Alt+Y].
1
0
.
Click the Approval Status Approved option.
1
1
.
Click the Approval Status Approved option.
1
2.
Click the Approval Status Approved option.
1
3
.
Click the Approval Status Rejected option.
1
4
.
Click the Approval Status Recount option.
1
5
.
Click the Item Details tab.
Page 460
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 467/499
Training GuideOracle EBS R12 Inventory
Step Action
1
6
.
Use the Item Details tab to view information about the item such as revision, lot, serial
number, and uom information
1
7
.
Click the Item Location tab.
1
8
.
Use the Item Location tab to view sub inventory and locator information.
19
.
Click the Reason, Reference tab.
2
0
.
Use the Reason, Reference tab to optionally enter a reason for the adjustment action.
2
1
.
Click the Count tab.
2
2.
Use the Count tab to view information about the count such as who counted the items
and the date of the count.
2
3
.
Click the Count Status, Class tab.
2
4
.
Use the Count Status, Class tab to view the status of the count and the ABC class to
which the items belong.
25
.
Click the Approval tab.
2
6
.
Use the Approval tab to view who has cycle count approval authority and the date the
cycle count was approved.
Page 461
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 468/499
Training GuideOracle EBS R12 Inventory
Step Action
2
7
.
Click the Save button.
2
8
.
Click the OK button.
or
Press [Alt+O].
29
.
You have completed the Approving Cycle Count Adjustments procedure.
End of Procedure.
Requesting the Cycle Count List
Use the Cycle Count Listing Report to view all counts to perform within a given date range.
In this example, you will you will submit the Cycle Count Listing Report.
Procedure
Page 462
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 469/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Cycle Counts Summary page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Cycle Counts link.
5
.
Use the Cycle Counts Summary page to search for existing cycle counts.
Page 463
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 470/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Press [F11].
7
.
Enter the desired information into the Cycle Count field. Enter "OrganizationCount".
8
.
Press [Ctrl+F11].
9
.
Click the Tools menu.
or
Press [Alt+T].
10
.
Click the Cycle Count Listing Report menu.
or
Press [L].
Page 464
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 471/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
After you generate count requests you can submit the requests for the Cycle Count
lists report. this reports lists all counts that you need to perform within in a given date
range.
Step Action
1
2
.
Click the Include Recounts Only option.
1
3
.
Click the Display Serial Number option.
1
4
.
Click the Display On-hand Quantity option.
Page 465
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 472/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5
.
Click the OK button.
or
Press [Alt+K].
1
6
.
Click the OK button.
or
Press [Alt+O].
1
7
.
You have completed the Requesting the Cycle Count List procedure.
End of Procedure.
Page 466
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 473/499
Training GuideOracle EBS R12 Inventory
Physical InventoryA physical inventory is a periodic reconciliation of system on-hand balances with physical counts
in inventory. You can perform physical inventories whenever you choose to verify the accuracy
of your system on-hand quantities. You can perform a physical inventory for an entire
organization or for particular subinventories within an organization. Physical inventories areusually performed once every six months or once a year depending on the organization
requirements.
Upon completion of this lesson, you will be able to:
• Define a physical inventory.
• Take a snapshot of inventory quantities.
• Generate physical inventory tags.
• Enter and void physical inventory tags.
• Approve physical inventory adjustments.• Process physical inventory adjustments.
• Purge physical inventory information.
Purging Physical Inventory Information
Use the Purge Physical page to purge a physical definition from the database. The system deletes
all information associated with the physical definition. However, the purge does not affect any
adjustments or adjustments transactions made using the physical definition. You can also purge
only the physical inventory tags.
In this example, you will purge the physical inventory tags associated with a physical inventory
definition.
Procedure
Page 467
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 474/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Physical Inventories Summary page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Physical Inventories link.
5
.
Use the Physical Inventories Summary page to view existing physical inventories.
You must select an existing physical inventory for which you want to physical
inventory information.
Page 468
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 475/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Physical Inventory field.
7
.
Click the Tools menu.
or
Press [Alt+T].
8.
Click the Perform purge menu.
9
.
Use the Purge Physical page to purge a physical inventory definition. This concurrent
request does not affect adjustments or adjustment transactions.
10
.
If you select Tags Only, then the system purges just tags. If you select All, then thesystem purges all information associated with the physical inventory. The default
selection is Tags Only.
Page 469
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 476/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Click the Purge button.
or
Press [Alt+P].
1
2.
Click the OK button.
or
Press [Alt+O].
1
3
.
You have completed the Purging Physical Inventory information procedure.
End of Procedure.
Defining a Physical Inventory
You can define and maintain an unlimited number of physical inventories. You use the Define
Physical Inventory page to define physical inventory information.
Page 470
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 477/499
Training GuideOracle EBS R12 Inventory
In this example, you will define a physical inventory.
Procedure
Step Action
1
.
Begin by navigating to the Physical Inventory page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Physical Inventories link.
Page 471
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 478/499
Training GuideOracle EBS R12 Inventory
Step Action
5
.
Use the Physical Inventories Summary page to view existing physical inventories
and to create new physical inventories.
Step Action
6
.
Click the New button.
or
Press [Alt+N].
7
.
Use the Define Physical Inventory page to enter the parameters for your physical
inventory.
Page 472
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 479/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Name field.
9
.
Enter the desired information into the Name field. Enter "FGI Physical Inventory".
1
0.
When you click in the Description field the date appears automatically.
1
1
.
Click in the Description field.
12
.
Enter the desired information into the Description field. Enter "Finished GoodsSubinventory Physical Inventory".
1
3
.
Click in the Qty field.
Page 473
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 480/499
Training GuideOracle EBS R12 Inventory
Step Action
1
4
.
Enter the desired information into the Qty field. Enter "2".
1
5
.
When you click in the Tolerances - field the value you entered in the Tolerances +
field appears automatically.
1
6
.
Click in the Approval Tolerance Negative field.
17
.
Click the Specific option.
1
8
.
Click in the Subinventory field.
1
9
.
Enter the desired information into the Subinventory field. Enter "FGI".
2
0.
Click the Exclude Zero Balances option.
2
1
.
Click the Exclude Negative Balance option.
2
2
.
Click the Save button.
23
.
You have completed the Defining a Physical Inventory procedure.End of Procedure.
Page 474
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 481/499
Training GuideOracle EBS R12 Inventory
Processing Physical Inventory Adjustments
After you finish entering physical inventory counts and approving adjustments, you can submitthe process that automatically posts the adjustments. The system automatically creates a material
transaction that adjusts the item quantity and debits or credits the adjustment account you specify
for you physical quantity.
Once you run the adjustment program, the system does not allow you to generate new tags or
make any further updates to tag counts. Due to the irreversible nature of this program, Oracle
Inventory posts no physical inventory adjustments if you have any adjustments that are still
pending approval.
In this example, you will process physical inventory adjustments.
Procedure
Step Action
1
.
Begin by navigating to the Physical Inventories Summary page.
Click the vertical scrollbar.
Page 475
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 482/499
Training GuideOracle EBS R12 Inventory
Step Action
2
.
Click the Inventory link.
3.
Click the vertical scrollbar.
4
.
Click the Physical Inventories link.
5
.
Use the Physical Inventories Summary page to process physical inventory
adjustments.
Step Action
6
.
Click the vertical scrollbar.
7
.
You must select the physical inventory for which you want to process adjustments.
Page 476
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 483/499
Training GuideOracle EBS R12 Inventory
Step Action
8
.
Click in the Physical Inventory field.
9.
Click the Tools menu.
or
Press [Alt+T].
10
.
Click the Launch adjustments menu.
1
1
.
Use the Launch Adjustments page to enter the GL account to which you want to
charge the adjustment information.
Page 477
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 484/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Click in the Adjustment Account field.
1
3
.
Enter the desired information into the Adjustment Account field. Enter "01-580-
7740-0000-000".
1
4.
Click the Launch Adjustments button.
or
Press [Alt+a].
15
.
Click the OK button.
or
Press [Alt+O].
1
6
.
You have completed the Processing Physical Inventory Adjustments procedure.
End of Procedure.
Generating Physical Inventory Tags
You use physical inventory tags to record the physical counts of inventory items.
In this example, you will generate physical inventory tags.
Procedure
Page 478
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 485/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Generate Physical Inventory Tags page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Tag Generation link.
5
.
Use the Generate Physical Inventory Tags page to generate physical inventory tag
numbers. A tag contains the count for a group of a given item. Although you can
record only one item on a tag, multiple tags can reference the same item with each tagreferring to a unique physical location for an item.
Page 479
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 486/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Name field.
7
.
Enter the desired information into the Name field. Enter "FGI Physical Inventory".
8
.
When you click in the Description field, the physical inventory description and the
date the physical inventory was created appears automatically.
9
.
Click in the Description field.
1
0
.
When you enter a starting tab number be sure that it contains the total number of
possible digits that a tag can have.
1
1
.
Click in the Starting Tag field.
Page 480
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 487/499
Training GuideOracle EBS R12 Inventory
Step Action
1
2
.
Enter the desired information into the Starting Tag field. Enter "A000001".
1
3
.
If you selected Default as the tag type, then the system automatically determines the
Digit Increments, Ending Tag, and Number of Tags for you.
1
4
.
Click in the Digit Increments field.
15
.
When you click Generate, the system generate the tag numbers and information, itdoes not physically print the tags. To physically print the tags, you must run the
Physical Inventory Tags report.
1
6
.
Click the Generate button.
or
Press [Alt+n].
1
7
.
You have completed the Generating Physical Inventory Tags procedure.
End of Procedure.
Entering and Voiding Physical Inventory Tags
Use the tags you generated to record your physical counts. The system uses the counts you enter
for your tags to determine if your items need quantity adjustments, and if so, whether you need to
approve them.
It is important for auditing purposes to track the status of each physical inventory tag. If you do
not use one or more tags, you should void them in the Physical Inventory Tag Counts page. If
you void a default tag, then the system adjusts the quantity in that location to zero.
In this example, you will enter physical inventory counts.
Procedure
Page 481
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 488/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Physical Inventory Tag Count page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Global Parameters link.
5
.
Use the Physical Inventory Tag Counts page to enter the quantity for each tag.
Page 482
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 489/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Name field.
7
.
Enter the desired information into the Name field. Enter "FGI Physical Inventory".
8
.
Click the Find button.
or
Press [Alt+i].
9
.
Click the Yes button.
or
Press [Alt+Y].
1
0
.
Click in the Qty field.
Page 483
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 490/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Enter the desired information into the Qty field. Enter "5".
1
2
.
Click in the Qty field.
1
3
.
Enter the desired information into the Qty field. Enter "1".
14
.
Click in the Qty field.
1
5
.
Enter the desired information into the Qty field. Enter "1".
1
6
.
Click in the Qty field.
1
7.
Enter the desired information into the Qty field. Enter "2300".
1
8
.
Click in the Qty field.
1
9
.
Enter the desired information into the Qty field. Enter "776".
20
.
Click in the Qty field.
2
1
.
Enter the desired information into the Qty field. Enter "1".
Page 484
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 491/499
Training GuideOracle EBS R12 Inventory
Step Action
2
2
.
Click in the Qty field.
2
3
.
Enter the desired information into the Qty field. Enter "57".
2
4
.
Click the Save button.
2
5
.
You have completed the Entering and Voiding Physical Inventory Tags procedure.
End of Procedure.
Approving Physical Inventory Adjustments
You can view, reject, or approve physical inventory adjustments pending approval. The
adjustments you can view are determined by the approval option you defined in your physical
inventory, if you approve a particular adjustment, then the Process Physical Inventory
Adjustments program adjusts the inventory balance by that quantity. If you reject an adjustment,
then the system does not change the system quantity.
In this example, you will approve physical inventory adjustments.
Procedure
Page 485
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 492/499
Training GuideOracle EBS R12 Inventory
Step Action
1
.
Begin by navigating to the Approve Physical Adjustments Summary page.
Click the vertical scrollbar.
2
.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4
.
Click the Approve Adjustments link.
5
.
Use the Approve Physical Adjustments Summary page to view, approve and reject
physical counts. This page displays a summary of all count information.
Page 486
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 493/499
Training GuideOracle EBS R12 Inventory
Step Action
6
.
Click in the Name field.
7
.
Enter the desired information into the Name field. Enter "FGI Physical Inventory".
8
.
Click the Find button.
or
Press [Alt+i].
9
.
Click the Yes button.
or
Press [Alt+Y].
1
0
.
If you have an individual line selected, then you can view the individual tag
information for the count. The first line is automatically selected when you open this
page.
Page 487
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 494/499
Training GuideOracle EBS R12 Inventory
Step Action
1
1
.
Click the Open button.
or
Press [Alt+O].
1
2
.
Use the Approve Physical Adjustments page to view, approve, and reject an
individual tag count. This page depicts the snapshot count, the adjustment information,
and the physical count information. It also displays the variance information.
Step Action
13
.
Click the Reject option.
1
4.
Click the Close button.
Page 488
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 495/499
Training GuideOracle EBS R12 Inventory
Step Action
1
5.
Click the Reject option.
1
6
.
Click the Approve option.
1
7
.
Click the Reject option.
18
.
When you select an adjustments line the Approve Physical Adjustments pageautomatically opens.
1
9
.
Click in the Adjustments field.
Page 489
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 496/499
Training GuideOracle EBS R12 Inventory
Step Action
2
0.
Click the Approve option.
2
1
.
Click the Close button.
Page 490
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 497/499
Training GuideOracle EBS R12 Inventory
Step Action
2
2
.
Click the Save button.
2
3
.
You have completed the Approving Physical Inventory Adjustments procedure.
End of Procedure.
Taking a Snapshot of Inventory Quantities
Before you can generate tags for physical inventory, you must take a snapshot of all system on-
hand quantities for your items. the snapshot saves all current on-hand quantities and costs. The
system uses this information as the basis for all physical inventory adjustments. All tag counts
you enter for this physical inventory are compared with these static quantities. You can resume
normal inventory operations after you have entered your counts but before you have authorized
all final physical inventory adjustments.
In this example, you will take a snapshot of inventory quantities.
Page 491
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 498/499
Training GuideOracle EBS R12 Inventory
Procedure
Step Action
1
.
Begin by navigating to the Physical Inventories Summary page.
Click the vertical scrollbar.
2.
Click the Inventory link.
3
.
Click the vertical scrollbar.
4.
Click the Physical Inventories link.
5
.
Use the Physical Inventories Summary page to view existing physical inventories.
You must select an existing physical inventory before you can open it to take the snap
shot.
Page 492
7/29/2019 Oracle Inventory Traning - Complete
http://slidepdf.com/reader/full/oracle-inventory-traning-complete 499/499
Training GuideOracle EBS R12 Inventory