AUTOMATIC POLYELECTROLYTE PREPARATION PLANT
PAP-3CDosing equipment
®
AUTOMATIC POLYELECTROLYTE
PREPARATION PLANT
Process Description
The Automatic Polyelectrolyte Preparation Plant PAP-3C.
• PAP 3-C is composed of three chambers: mixing, maturation and the third one that picks the mature polyelectrolyte in optimal condition for dosing.
• Each chamber has 30 minutes retention time.• PAP 3-C is armed with a flow-meter-inlet. • It is equipped with an anticondensation duct.• It has double helix to favour the polyelectrolyte mixture.• Displays allows you to see the product in each phase.• PAP-3C includes alarms for shortage of product, water and pressure.• The hopper is 60l capacity.• The arrangement allows to add polyelectrolyte without stairs.• You can make a bypass in the chambers to spend the entire product during the stops.• First filling function.• It boosts the fast disolution of the polyelectrolyte, avoiding lump formation.• Ideal design for containerized plants, it takes up less space.• PAP-3C counts with electrical panel, with 4” touch screen and automaton S7-1212, it has calibration system of raw
material and concentration control system of finished product.
POLYELECTROLYTE DOSING Kg/h
Poly Concentration % 0,1% 0,3% 0,5%
Maturation time 30 min 2 6 10
Maturation time 20 min 3 8 15
Electrical Board
Inlet Poly.
Water Inlet
Water inlet+Poly.
Purgue Ø20
Purgue Ø63Aspiration Ø32
Mature Poly. Outlet
Pressure Transmitter 3/4”
Stage One: Starts mixing Poly.
Intermediate Phase: The mixture of Poli. It has good characteristics.
Final Phase: Poli. Macerated
Solid PolyelectrolytesClear waterPoly. and water mixture
Technical Specifications
POLYELECTROLYTE PREPARATION PLANT - PAP 3C - INOX RANGE
MODEL PAP 3C-500 PAP 3C-1000
Tank
Capacity (l) 500 1.000
Capacity per chamber m3 166 333
Production Capacity (l/h) 750 1.500
Length (mm) (L) 1.304 1.400
Width (mm) (A) 873 1.163
Height (mm) (H) 1.689 1.765
Material AISI-304 / AISI-316 AISI-304 / AISI-316
Overflow Ø63mm. AISI-316 Ø90mm. AISI-316
Purge Ø63mm. AISI-316 Ø63mm. AISI-316
Aspiration pump Ø32mm. AISI-316 Ø32mm. AISI-316
Pressure sensor outlet Ø3/4". AISI-316 Ø3/4". AISI-316
1st Chamber & transfer drainage Ø20mm. AISI-316 Ø20mm. AISI-316
Scatterer
Material PP PP
Polyelectrolyte Hopper
Capacity (l) 60 60
Dosification (l/min) 0,1-0,5 0,1-0,5
Material AISI-314 AISI-314
Endless AISI-314 AISI-314
Power (kW) 0,18 0,18
Moto-reductor NMRV040 NMRV040
Shaker
Power (kW) 0,37 0,55
Turbine & shaft material AISI-316 AISI-316
Worldwide References
© TORO EQUIPMENT 2018AUTOMATIC PREPARATION POLIELECTROLYTE PLANT
®
TORO EQUIPMENT S.L. (Fábrica)Ctra. Nacional VP-3302, Km 11.
471329, VillavaquerínValladolid-España
TORO EQUIPMENT S.L. (Fábrica y Oficinas)C/ Sauce s/n.
47193 La CistérnigaValladolid-España
Tel +34 983 403047 Fax +34 983 [email protected]
ArgentinaAustraliaAustriaBelgiumBoliviaBrazil
BulgariaCanadaChileChina
ColombiaCosta Rica
CroatiaDenmark
EgyptEstoniaFinlandFrance
GermanyGreeceHollandHungary
IndiaIndonesiaIrelandIsraelItalyJapanJordanLatvia
LebanonLithuania
LuxembourgMalaysiaMexicoMoldovaMoroccoPakistanPanama
PeruPoland
PortugalRomaniaRussia
Saudi ArabiaSeychellesSingapore
South AfricaSpain
SwitzerlandThailand
Trinidad &TobagoTunisiaTurkeyUAEUK
UkraineUruguay
USAVenezuela
Factory Villavaquerín - Valladolid
Factory La Cistérniga - Valladolid