PERGOLA 80x40
80x40
• Flat awning for terraces that lets you enjoy the outdoor and create new private spaces protected from the sun.
• Setting of various models according to the specific needs of each installation.
80x40
• Versatility• Adaptation to any kind of
space• Compatibility with perimetral
closing systems.
80x40
• Unique space full of light but with3% less heat
• Inclination of fabric (to drain thewater laterally).
• Like for ZEN system, Gaviota offers the possibility of installing an overhead canvas to protect and create a thermal insulation chamber.
80x40
Operation:
Motor cable ManualMotor cog belt
1. Between walls
80x40
Assembling options :
2. To ceiling (only manual)
80x40
Assembling options :
3. To wall 1 level
80x40
Assembling options :
80x40
Assembling options :
4. To wall 2 levels
80x40
Assembling options :
5. Pergola 1 level (motor cable or manual)
80x40
Assembling options :
6. Pergola 2 levels (motor cable or manual)
7. To ceiling porche
80x40
Assembling options :
80x40
80x40
HomologationWind resistance Class 3
80x40
Profiles and accessories
80x40
80x40
80x40
80x40
80x40
80x40
80x40
- Guide profile 80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40
- Telescopic sliding flange:
• Mín. A= 106mm • Máx. A= 157mm
80x40
80x40
80x40
80x40
80x40
80x40
80x40
80x40 manual
• Between walls• To ceiling• To wall 1 level• To wall 2 levels• To ceiling porche 1 level• To ceiling porche 2 levels• Pergola 1 level• Pergola 2 levels
80x40
80x40
- Double pulley- Corner double pulley
80x40
80x40
80x40
80x40 motorized cable
80x40
• Between walls• To ceiling• To wall 1 level• To wall 2 levels• Pergola 1 level, 2 levels• To ceiling porche 1 level• To ceiling porche 2 level
80x40
80x40
80x40
- Cut the tube 10 cm less thanthe istance between guides.
80x40
- Insert the aluminium pulleys
- Insert the motor and the cap
80x40
- Fix the bearing support
- Fix the motor support
80x40
- Put the tube between guides
- Put the frontal pulleys, their center has to coincide with the center of threaded pulleys.
80x40
- Take the fqabric profiles to the frontal part
- Put the cable fixation for the firstfabric profile and the steel cable.
80x40
- Provide current to the motor, turndirection for opening.
- Pass the cable into pulley.
- Make double turn with steel cable, keeping it in the closest way to the tubeside.
80x40
- Pass the cable to the tensor ring and fix it with screw.
- The cable has to be stretched first byhand, once it is done, we will stretch itwith the tensor, it has to be equal onboth sides.
80x40
80x40 motorized cog belt
80x40
• Between walls• To wall 1 level• To wall 2 levels
80x40
Maximum dimensions : 4 X 4 m
Motor: Cross 30/15 S45
80x40
80x40
Maximum dimensions: 6 X 4 m
Motor: Cross 40/15 S45
80x40
80x40
-Adjustable wall bracket
80x40
80x40
80x40
80x40
- Cog belt
80x40
80x40
80x40
80x40
80x40
80x40
80x40
Flat hood
80x40
• Between walls• To wall 1 level• To wall 2 levels• Pergola 1 level manual• Pergola 1 level motor cable
80x40
80x40
80x40
80x40
Flat hood Z
For motorized pergolas:• Zen Rain• Zen • 80x40 with cog belt
80x40
- Flad hood Z profile
80x40
80x40
- Flat hood Z lateral covers inclined
80x40
- Flat hood Z lateral covers
80x40
80x40
- Supports flat hood Z
80x40
- Rubber profile
80x40
80x40
80x40
Lattice
80x40
80x40
80x40
80x40
80x40
80x40
NOTA: Copyright GAVIOTA SIMBAC S.LLas fotografías, ilustraciones and textos de este catalogo son de propiedad de GAVIOTA SIMBAC S.L and pueden ser utilizados, copiados o reproducidos de ningún modo o por cualquier medio, salvo consentimiento expreso previo de GAVIOTA SIMBAC, S.L.