LOW-COST MPW AND DEDICATED MASK RUNSTo lower the cost of access, prototyping is implemented through a Multi-Project Wafer (MPW) service which allows shared mask, processing and engineering costs. MPW runs are available at fixed design registration, with two passive runs and three active runs (containing active elements such as modulators and photo-dectors) currently scheduled. For quantities larger than the 20-25 samples delivered in an MPW run, dedicated runs can be requested which return approximately 15, 200mm wafers.
ISiPP50GThe platform enables cost-effective silicon photonic ICs for:
• High-performance optical transceivers (50Gb/s and beyond) for datacom, telecom and access networks
• Optical sensing (gas, pressure, strain) and read-out ICs
• Biomolecule detection, drug development, point-of-care diagnostics
The ISiPP50G platform co-integrates a wide variety of passive and active components to support a wide range of optical transceiver architectures at data rates of 25Gb/s or 50Gb/s. The offered integrated components include low-loss waveguides, efficient vertical grating or broadband edge couplers, high-speed silicon electro-optic modulators, high-speed silicon-germanium electro-absorption modulators and high-speed germanium waveguide photo-detectors. iSiPP50G offers state-of-the-art performance, design flexibility and superior CD and thickness control. It is a fixed process technology (130nm) with a validated device library.
ISiPP50G DESIGN KITTo enable user access, imec provides an extensive iSiPP50G process design kit (PDK). This kit includes process documentation, library performance, layout guidelines for custom, design and verification rules. The PDK is available upon signature of imec’s Silicon Photonics Design Kit License Agreement (DKLA).
Modules Description Enableddevices
3 silicon patterning steps
3 etch depths in 220nm Si: 70nm, 160nm; 220nm (193 nm litho)
Strip/rib waveguides, various passive optical devices,
silicon taper
Gate oxide and Poly-Silicon layer
1 etch depth: full poly etch (160nm)
(193nm litho)
Advanced grating couplers, poly-Si
waveguide
Ion implantation in Si
8 implants levels: 4x n-type and 4x
p-type
Si carrier depletion, injection and
accumulation devices, Ge Photodectors,
doped Si resistors, ...
Ge module100% Ge(Si) RPCVD selective epitaxial
growth & 2x implants levels
Ge PhotodectorsGe(Si) EA modulator
Silicide tungsten contact module
Ohmic contacts to doped silicon
Standard CMOS contacts plugs
Two-level metal interconnect
Cu-based two-level metallization
Standard CMOS interconnects
Aluminum passivation
Aluminium finish metallization
Standard CMOS interconnects
Deep trenchDeep trench to
expose edge coupler facets
Edge couplers
PHOTONIC INTEGRATED CIRCUIT PROTOTYPING AND SMALL VOLUME PRODUCTIONImec provides access to Photonic Integrated Circuit (PIC) prototyping and small volume production based on imec’s iSiPP50G silicon photonics platform. We turn your photonic ideas into reality at a single point of contact.
* O-band versions available in PDK
Parameter Typ.Value Unit Comments
Operation Wavelength 1550 nm O-band designs also available
Electro-Optic Bandwidth (S21) f3dB24 GHz at 0V bias37 GHz at -2V bias
Modulation efficiency Vπ 12 VOptical Insertion Loss IL -2.5 dB Not including bias induced lossPhase-Shifter Length L 1.5 mmTermination Resistance RT 25 Ohm Doped Si resistor
50G TRAVELING-WAVE MACH-ZEHNDER MODULATOR (typical performance values)
Parameter Typ.Value Unit Comments
Operation Wavelength ~1560 nm L-band version also available
Electro-Optic Bandwidth (S21) f3dB>50 GHz at -1V bias>50 GHz at -2V bias
Optical Insertion Loss IL -4.2 dBDevice Length L 40 um
50G SiGe ELECTRO-ABSORPTION MODULATOR (typical performance values)
Parameter Typ.Value Unit Comments
Quality Factor Q 3000Electro-Optic Bandwidth (S21) f3dB 45 GHz 0V biasStatic Transmitter Penalty TP 10 dB 1.5Vpp drive swingDiode Capacitance Cj 20-30 fFDiode Series Resistance Rs ~70 OhmRing Radius R 5 um
50G Si RING MODULATOR (typical performance values)
Parameter (type 1) Typ.Value Unit Comments
Opto-Electrical Bandwidth f3dB >50GHz GHz C-band*C-band Responsivity ~0.9 A/WO-band Responsivity ~0.85 A/W Room temp, -1V biasDark Current Id <50 nA
Parameter (type 2) Type.Value Unit Comments
Opto-Electrical Bandwidth f3dB >25GHz GHz C-band*C-band Responsivity ~1.0 A/WO-band Responsivity ~0.94 A/W Room temp, -1V biasDark Current Id <50 nA
50G Ge PHOTODETECTOR (typical performance values)
Single Mode Waveguides Typ.Value Unit Comments
Strip Waveguide C-band <1.4 dB/cm 450nm wideStrip Waveguide O-band <2.6 dB/cm 380nm wideRib Waveguide C-band <0.6 dB/cm 650nm wideRib Waveguide O-band <0.7 dB/cm 580nm wideThickness Control 3s <4.5 nm
Fiber Grating Couplers Type.Value Unit Comments
Insertion Loss 2.5 dB C-band*, TE, SMFI dB Bandwidth 35 nm C-band*, TEPeak-λ within-wafer control 1s <4 nm
Fiber Edge Couplers Typ.Value Unit Comments
Insertion Loss <2 dB C-band*, Lensed FiberI dB Bandwidth >100 nm C-band*Polarization dependent loss <0.5 dB C-band*
PASSIVES (typical performance values)
S21 50Gb/s, 2.5Vpp
Microscope image 50Gb/s, 2.0Vpp
Microscope image 50Gb/s, 2.0Vpp
Statistics
TEM image
25Gb/s
50Gb/s
Gra
ting
Coup
ler
Edge
Cou
pler
imec • Kapeldreef 75 • 3001 Leuven • Belgium • www.imec-int.com
DISCLAIMER - This information is provided ‘AS IS’, without any representation or warranty. Imec is a registered trademark for the activities of IMEC International (a legal entity set up under Belgian law as a “stichting van openbaar nut”), imec Belgium (IMEC vzw supported by the Flemish Government), imec the Netherlands (Stichting IMEC Nederland, part of Holst Centre which is supported by the Dutch Government), imec Taiwan (IMEC Taiwan Co.) and imec China (IMEC Microelectronics (Shanghai) Co. Ltd.) and imec India (Imec India Private Limited), imec Florida (IMEC USA nanoelectronics design center).
CONTACT [email protected] T +32 16 28 82 05
www.europractice-ic.com