PNEUMATICALLY DRIVEN NAILS
page designation name
WIRE AND COIL COLLATED NAILS96 Plain nails, wire and coil collated97 Ringed nails, wire and coil collated98 Electroplated ringed nails, wire and coil collated98 Hot-dip galvanized ringed nails, wire and coil collated99 Stainless ringed nails, wire and coil collated99 WORKMAN Tool for driving wire and coil collated nails100 Hot-dip galvanized clout nails, wire and coil collated100 Electroplated clout nails, wire and coil collated100 WORKMAN Clout nails driving tool
WIRE COLLATED NAILS IN PACKAGES101 Grooved nails, wire collated in packages101 Hot-dip galvanized grooved nails, wire collated in packages102 Grooved nails, wire collated in packages102 Hot-dip galvanized grooved nails, wire collated in packages103 WORKMAN Tool for driving wire collated nails in packages
PLASTIC COLLATED NAILS IN PACKAGES103 ANCHOR Hot-dip galvanized ringed nails, plastic collated in packages104 ANCHOR Electroplated ringed nails, plastic collated in packages104 WORKMAN Tool for driving anCHoR nails, plastic collated in packages105 Profiled nails plastic collated into packages105 Hot-dip galvanized profiled nails, plastic collated in packages106 WORKMAN Tool for driving plastic collated nails in packages
COMPRESSORS106 WORKMAN Compressor106 WORKMAN Compressor
CHAPTER 05
The pneumatically driven nailer for driving wire and coil collated nails at the angle of 15°. • shooting rate up to 200
pieces/minute
• low air consumption, approx. 0.4 litre per shot
• safety lock to prevent accidental shot
• plastic covers - for greater security
• adjustable nail embedding depth ensures accurate assembly
• the cartridge is specifically designed for the correct type of nails, and accepts whole coils
• duralumin case, lightweight yet durable, comfortable rubber grip for a secure hold on the gun
• correct balancing and light weight (2.3 kg) increase comfort of work
• ability to drive nails individually and in series
Pneumatically driven nailers for driving wire collated gro-
oved nails at the angle of 27° and 34° in packages.
WHAT MAKES PNEUMATICALLY DRIVEN NAILS SPECIAL
NAILERS
SPEED • faster installation compared
to the traditional method
• easy tool operation
SAFETY • unlike the traditional
method the nailer allows installation with one hand, increasing work safety
• the tools are provided with double protection for gre-ater security of work. The nail is embedded when the trigger is pressed and the tool touches the compo-nent being fixed
PRECISION• increased accuracy of
joining components
• the nail cartridge set at an angle enables nailing in places which are difficult to reach
• exceptional protection against corrosion, at least 50 microns galvanized
• hot dip galvanization increases the resistance to detachment
• wire connection at two points ensures stable holding of the nail in the tool,
• as well as embedding it straight it in the substrate
• high quantity of nails in the coil (120 pieces) reduces downtime (fewer reloads)
• increased diameter of the head ensures a better attachment of the roofing felt
• the Swedish design of the shank increases the resistance of the nail against pulling, and shear and reduces the quantity of nails for the joint
• the wire connections between the nails ensure higher durability of the packages (they do not fall apart under moisture)
• hot dip galvanized coat of at least 50 μm provides maximum protection against corrosion, also increases the nail pull strength
• the cartridge can hold from 25 to 100 nails. With 25 pieces the tool is lighter, while 100 pieces reduces the downtime needed to reload
CLOUT NAILS, WIRE AND COIL COLLATED
WIRE COLLATED GROOVED NAILS IN PACKAGES
Carbon steel nails, intended for joining structural beams, counterbattens, roof, ceiling and façade boards, and for ceiling particle boards.
Hot-dip galvanized carbon steel nails. Designed for fixing of roofing felt shingles and plastic facades to wooden structure.
94
tool tool type nail type page
NAILS IN PACKAGESWorkman an-28 27° 102Workman an-21 21° 105Workman an-34 34° 101Basso (Bex) a34/100 a34/90 n90pa34 34° 101Basso (Bex) a22/90 n90PH 21° 105Bea R100, R90, R130, R160 21° 105Bea D90 (gas), D100 34° 101Bostitch Kn85 21° 105Bostitch n80SB, n100S 27° 102DeWalt D51823 34° 101DeWalt D51845 21° 105DuoFast/Kartro nSPM325F, Cn325a 27° 102DuoFast/Kartro Cn400, Cn350, nSP350F 21° 105DuoFast/Kartro Cn90 21° 105Haubold Rn100D, Rn90 P II 21° 105Haubold Rn160R, Rn130R 21° 105Hotachi nR90GR (gas), nR90a 21° 105Hitachi nR90GC (gas), nR90aD 34° 101Makita an923 21° 105Makita an943 34° 101Max Sn90a, Sn80, Sn890RH 21° 105Paslode 350/90 (gas), CF325 (gas) 34° 101Paslode F400S, S350S 34° 101Senco Pro602/702/652/752 21° 105Senco Pro601/701/651/751 34° 101Senco Sn325, Sn IV, Sn70, a900Fn 34° 101Tjep Gn 100 34° 101
COIL COLLATED CLOUT NAILSWorkman Cn-3516 22-45 mm 100Basso (Bex) nR32/45, C31/45 19-45 mm 100Bostitch Rn45, Rn46 19-45 mm 100Bostitch n12B 22-45 mm 100DeWalt D51321 19-45 mm 100Kartro Rn15Wa, TP45 16-35 mm 100Hitachi nV45aB 22-45 mm 100Holzher/Gunnebo 3516 19-45 mm 100Max Cn450R 19-45 mm 100Paslode 3175/45R, C-Q 19-45 mm 100Senco Roof Pro 450/455 XP 19-44 mm 100Senco SCn40R 19-40 mm 100Stanley atro Roll papp 22-45 mm 100TJEP TP45 19-45 mm 100Workman EX45 19-45 mm 100
COIL COLLATED NAILSWorkman Cn 3890 15° 96-99Basso (Bex) C 23/57, C 29/70, C 33/90 15° 96-99Bea 550 DC, 700 DC, 900 DC 15° 96-99Bostitch n58C-1-E, n71C-1-E, n89C-1p-E 15° 96-99Haubold RnC 50S/KP, RnC 56WKII, RnC 90WII 15° 96-99Makita an 62 1, an 901 15° 96-99Max Cn 55, Cn 70, Cn 80 15° 96-99Senco PaL 57, PaL 70, PaL 83, PaL 90 15° 96-99
ANCHOR NAILS IN PACKAGESWorkman EX 440 45° 103-104
THE RIGHT NAIL FOR THE RIGHT NAILER
21o
15o
15o
34o
27o
34o
95
HOW TO CHOOSE THE RIGHT NAILS?
FASTENED MATERIAL FASTENER TYPE NAIL SIZESUGGESTED QUANTITY
NOTES
1 RAFTERS according to design
2 STRUCTURAL BEAMS anCHoR naILS40 – 4,050 – 4,060 – 4,0
3 CEILING BOARDSProfiled nails
50 – 2,865 – 2,875 – 2,8 15 – 20
pieces/m2nail length = 2 × 5 × board thickness beam > 120 mm2 = 2 nails/board
Ring-shank nails6,0 – 2,865 – 2,8
4 CEILING CHIPBOARDSProfiled nails 65 – 2,8
15 – 20pieces/m2
nail length= 2 × 5 × thickness of the fastened board
Ring-shank nails 6,0 – 2,865 – 2,8
5 CHIPBOARD SOFFIT Clout nails16 – 3,119 – 3,122 – 3,1
30pieces/m2
6
COUNTERBATTENS 25×38 mm
Profiled nails50 – 2,865 – 2,8
10pieces/m2 1 nail for batten/counterbatten joint
BATTENS 45×70 mm Profiled nails 120 – 3,85
pieces/m2 1 nail for batten/counterbatten joint
7 ROOF BOARDSProfiled nails 75 – 2,8
15 – 20pieces/m2
board < 25 mm
Profiled nails 90,31 board > 25 mm
8 ROOFING COVERS - ROOFING FELT SHINGLES
Clout nails 35 – 3,1 pieces/m2
FASTENED MATERIAL
FASTENER TYPE
NAIL SIZE
FASTENER TYPE
NAIL SIZE
SUGGESTED QUANTITY
NOTES
9
FLOOR BOARDS:
board 19 ≤ mm Profiled nails 65 – 2,8 Ring-shank nails
60 – 2,8 15 –20 pieces/m2
board 25 > mmProfiled nails 75 – 2,8 Ring-shank
nails75 – 2,8 15 –20
pieces/m2
Profiled nails75 – 2,890 – 3,1
Ring-shank nails
75 – 2,890 – 3,1
30 pieces/m2
10
FAÇADE BOARDS:
board 25 > mm Profiled nails 75 – 2,8 6 – 8 pieces/m2
zig-zag nailing every 200 mm
board 25 ≥ mm Profiled nails 90 – 3,1 6 – 8 pieces/m2
11
16
17
102
1
3
4
5
68
9
12
13
14
15
7
96
PLAIN NAILS, WIRE AND COIL COLLATED
Round, plain, flat head nails made of carbon steel. Wire and coil collated at the angle of 15°.
D L
P401304 2,1 30 15o 19800
P401404 2,1 40 15o 13200
P401504 2,1 50 15o 13200
P401554 2,1 55 15o 9900
P405504 2,5 50 15o 13200
P405554 2,5 55 15o 13200
P405704 2,5 70 15o 9900
P405754 2,5 75 15o 9900
P408704 2,8 70 15o 16500
P408804 2,8 80 15o 16500
P402904 3,1 90 15o 5060
Designed for nailing pallets, crates and other wooden containers.
97
RING-SHANK NAILS, WIRE AND COIL COLLATED
Carbon steel nails with a flat head and a ring-shank. The special shape of the shank provides more durable fixing. Wire and coil collated at the angle of 15°.
D L
P411224 2,1 22 15o 26400
P411254 2,1 25 15o 23100
P411274 2,1 27 15o 19800
P411304 2,1 30 15o 19800
P411324 2,1 32 15o 16500
P411354 2,1 35 15o 16500
P411384 2,1 38 15o 16500
P411404 2,1 40 15o 13200
P411454 2,1 45 15o 13200
P411504 2,1 50 15o 13200
P411554 2,1 55 15o 9900
P415354 2,5 35 15o 19800
P415404 2,5 40 15o 13200
P415504 2,5 50 15o 13200
P415554 2,5 55 15o 13200
P415604 2,5 60 15o 9900
P415644 2,5 64 15o 9900
P415704 2,5 70 15o 9900
P415754 2,5 75 15o 9900
P418404 2,8 40 15o 11000
P418504 2,8 50 15o 11000
P418654 2,8 65 15o 8250
P418704 2,8 70 15o 8250
P418804 2,8 80 15o 8250
P418854 2,8 85 15o 5500
P418904 2,8 90 15o 5500
P412654 3,1 65 15o 7590
P412704 3,1 70 15o 7590
P412804 3,1 80 15o 5060
P412904 3,1 90 15o 5060
P414704 3,4 70 EPaL 7260
P414904 3,4 90 EPaL 4840
Designed for nailing pallets, crates and other wooden containers.
98
ELECTROPLATED RING-SHANK NAILS, WIRE AND COIL COLLATED
Carbon steel nails with a flat or spherical head and a ring-shank. Electro-plated nails. The ringed shape of the shank provides more durable fixing. Wire and coil collated at the angle of 15°.
D L
P511224 2,1 22 15o 26400
P511254 2,1 25 15o 23100
P511274 2,1 27 15o 19800
P511304 2,1 30 15o 19800
P511324 2,1 32 15o 16500
P511354 2,1 35 15o 16500
P511384 2,1 38 15o 16500
P511404 2,1 40 15o 13200
P511454 2,1 45 15o 13200
P511504 2,1 50 15o 13200
P511554 2,1 55 15o 9900
P515504 2,5 50 15o 13200
P515554 2,5 55 15o 13200
P515644 2,5 64 15o 9900
P515704 2,5 70 15o 9900
P518804 2,8 80 15o 8250
P512704 3,1 70 15o 7590
P512904 3,1 90 15o 5060
Designed for wooden garden accessories.
Carbon steel nails with a flat head and a ring-shank. Wire and coil collated. The ringed shape of the shank provides more durable fixing. Wire and coil collated at the angle of 15°.
HOT-DIP GALVANIZED RING-SHANK NAILS, WIRE AND COIL COLLATED
D L
P776045 2,5 45 15o 7500
P776050 2,5 50 15o 7500
P776065 2,5 66 15o 7500
P724060 2,8 60 15o 5000
P724076 2,8 75 15o 3000
μm
Designed for fixing various wooden parts to timber structures outside the building.
99
STAINLESS RING-SHANK NAILS WIRE A COIL COLLATED
a2 stainless steel nails, with a flat or spherical head and a ring shank. The ringed shape of the shank provides more durable fixing. Wire and coil collated at the angle of 15°.
D L
P421224 2,1 22 15o 26400
P421254 2,1 25 15o 23100
P421274 2,1 27 15o 19800
P421304 2,1 30 15o 19800
P421324 2,1 32 15o 16500
P421354 2,1 35 15o 16500
P421384 2,1 38 15o 16500
P421454 2,1 45 15o 13200
P421504 2,1 50 15o 13200
P425404 2,5 40 15o 13200
P425504 2,5 50 15o 13200
P425604 2,5 60 15o 9900
P425754 2,5 75 15o 9900
P428654 2,8 65 15o 8250
P428704 2,8 70 15o 8250
P428804 2,8 80 15o 8250
P428904 2,8 90 15o 5500
P422654 3,1 65 15o 7590
P422704 3,1 70 15o 7590
P422904 3,1 90 15o 5060
Designed for wooden garden accessories.
WORKMAN TOOL FOR DRIVING WIRE AND COIL COLLATED NAILS
Pneumatically driven nailers for driving wire and coil collated nails at the angle of 15°.
L
Workman 3890 45-90 15o 3,7 max 300 1
Designed for professional applications. Provides high performance, low maintenance and long life.
100
HOT-DIP GALVANIZED CLOUT NAILS, WIRE AND COIL COLLATED
Carbon steel, ring-shank, electroplated, round nails, with an enlarged, flat-head. Wire and coil collated at the angle of 15°.
Pneumatically driven nailer for driving wire and coil collated clout nails.
ELECTROPLATED CLOUT NAILS, WIRE AND COIL COLLATED
WORKMANCLOUT NAILS DRIVING TOOL
Round, hot-dip galvanized carbon steel nails, with an enlarged, flat head. Wire and coil collated at the angle of 15°.
D L
P740119 3,1 19 15o 4800
P740122 3,1 22 15o 4800
P740135 3,1 35 15o 2880
μm
Designed for fixing of roofing felt shingles and plastic facades to wooden structure.
D L
P740230 3,0 30 15o 3840
P740240 3,0 40 15o 2880
Designed for fixing of roofing felt shingles and plastic facades to wooden structures.
L
Workman 3516 19-45 15o 2,3 max 120 1
101
WIRE COLLATED GROOVED NAILS IN PACKAGES
HOT-DIP GALVANIZED GROOVED NAILS, WIRE AND COIL COLLATED
Carbon steel nails with a flat, D shaped head, and a grooved shank. Hot-dip galvanized nails. The unique square shape of the shank increases resistance to bending of the nail, improves the basic technical parameters such as pulling and shear forces. Wire collated at the angle of 34° in packages.
Carbon steel nails with a flat, D shaped head, and a grooved shank. The unique square shape of the shank increases resistance to bending of the nail, improves the basic technical parameters such as pulling and shear forces. Wire collated at the angle of 34° in packages.
D L
P713365 2,9 65 34o 1700
P713375 2,9 75 34o 1500
P713390 2,9 90 34o 1000
μm
D L
P711365 2,8 65 34o 1700
P711375 2,8 75 34o 1500
P721390 3,1 90 34o 1000
Designed for fixing various wooden parts to timber structures outside the building
Designed for fixing various wooden parts to timber structures outside the building
102
WIRE COLLATED GROOVED NAILS IN PACKAGES
Carbon steel nails with a flat, D shaped head, and a grooved shank. The unique square shape of the shank increases resistance to bending of the nail, improves the basic technical parameters such as pulling and shear forces. Wire collated at the angle of 27° in packages.
D L
P711065 2,8 65 27o 1700
P711075 2,8 75 27o 1500
P711090 3,1 90 27o 1000
P711000 3,4 100 27o 800
Designed for fixing various wooden parts to timber structures inside the building.
Carbon steel nails with a flat, D shaped head, and a grooved shank. Hot-dip galvanized nails. The unique square shape of the shank increases resistance to bending of the nail, improves the basic technical parameters such as pulling and shear forces. Wire collated at the angle of 27° in packages.
HOT-DIP GALVANIZED GROOVED NAILS, WIRE COLLATED IN PACKAGES
D L
P713065 2,8 65 27o 1700
P713075 2,8 75 27o 1500
P713090 3,1 90 27o 1000
P713000 3,4 100 27o 800
μm
Designed for fixing various wooden parts to timber structures outside the building.
103
WORKMANTOOL FOR DRIVING WIRE COLLATED NAILS IN PACKAGES
Pneumatically driven nailers for driving wire collated grooved nails at the angle of 27° and 34° in packages.
L
Workman an28 50-100 27o 3,5 75-90 1
Workman an34 50-100 34o 3,5 75-90 1
ANCHORHOT-DIP GALVANIZED RING-SHANK NAILS, PLASTIC COLLATED IN PACKAGES
Carbon steel, hot-dip galvanized anCHoR nails, with a ring-shank and a specially widened conical head. Plastic collated at the angle of 34°.
D L
P503403405HDG 4,0 40 34o 5000
P503503405HDG 4,0 50 34o 4000
P503603405HDG 4,0 60 34o 3000
μm
Designed for fixing carpentry joints and hooks for roof drainage systems to wooden structures inside and outside buildings. The ring-shank provides increased tear strength parameters, and the special shape of head - higher shear force parameters, in applications with system-based carpentry joints.
104
ANCHORELECTROPLATED RING-SHANK NAILS, PLASTIC COLLATED IN PACKAGES
Pneumatically driven nailer for driving anCHoR nails, plastic collated in packages at the 34° angle.
WORKMANTOOL FOR DRIVING ANCHOR NAILS, PLASTIC COLLATED IN PACKAGES
Carbon steel, electroplated anCHoR nails, with a ring-shank and a specially widened conical head. Plastic collated at the angle of 34°.
L
Workman EX440 40-60 34o 2,3 kg 25 1
D L
P503403405 4,0 40 34o 5000
P503503405 4,0 50 34o 4000
P503603405 4,0 60 34o 3000
Designed for fixing carpentry joints and hooks for roof drainage systems to wooden structures inside and outside buildings. The ring-shank provides increased tear strength parameters, and the special shape of head - higher shear force parameters, in applications with system-based carpentry joints.
105
HOT-DIP GALVANIZED PROFILED NAILS, PLASTIC COLLATED IN PACKAGES
Carbon steel nails with a flat head and a profiled shank. Hot-dip galvanized nails. The special shape of the shank provides more durable fixing. Plastic collated at the angle of 21° in packages.
Carbon steel nails with a flat head and a profiled shank. The special shape of the shank provides more durable fixing. Plastic collated at the angle of 21° in packages.
D L
P40280502105 2,8 50 21o 6000
P40280652105 2,8 65 21o 4500
P40280752105 2,8 75 21o 3000
P40310902105 3,1 90 21o 3000
P40812302105 3,8 120 21o 1500
P40381302105 3,8 130 21o 1500
D L
P40280502105HDG 2,8 50 21o 6000
P40280652105HDG 2,8 65 21o 4500
P40280752105HDG 2,8 75 21o 3000
P40310902105HDG 3,1 90 21o 3000
P40381202105HDG 3,8 120 21o 1500
P40381302105HDG 3,8 130 21o 1500
μm
Designed for fixing various wooden parts to timber structures inside the building.
Designed for fixing various wooden parts to timber structures outside the building.
PROFILED, PLASTIC COLLATED NAILS IN PACKAGES
106
WORKMANTOOL FOR DRIVING PLASTIC COLLATED NAILS IN PACKAGES
Pneumatically driven nailers for driving plastic collated grooved nails at the angle of 21° in packages.
D L
Workman an21 50 100 21o 3,5 kg 75-90 1
oil-free compressor, capacity 84 l/min, maximum pressure of 8 bar, 4 litres of storage capacity, weight: 18 kg.
oil compressor, capacity 150 l/min, maximum pressure of 8 bar, 20 litres of storage capacity, weight: 44 kg.
WORKMANKOMPRESOR
WORKMANKOMPRESOR
Workman EXM8 1
Workman EXD20 1