FC SERIESPOWER AMPLIFIERS
56
FC SERIESPOWER AMPLIFIERS
FC High performance power amplifierFC series of high-performance amplifier has a unique Class D design. Class D amplifier mixes Class A power amplifier with high quality sound and high efficiency of Class H amplifier.
FC series for the two-channel output, compact, light weight. Regardless of power output or efficiency and sound quality are excellent performance.
FCFC series is a highly flexible, powerful and cost-effective intelligent 2-channel power amplifier, in the 4 ohm load, the power can be stable operation. The FC Series is designed for
maximum acoustic system applications with a high set of high performance, such as high output power and efficient cooling systems. Two output channels use H-class circuits with
ultra-low distortion and high efficiency , Also equipped with a set of circuit protection, efficient cooling system and overheating protection. In addition, FC series can also be efficient
clipping / pressure limit processing, when reaching the top of the ceiling when the gain will slow down to protect the speaker.
MODEL
8ΩStereo Power
4ΩStereo Power
2ΩStereo Power
Frequency response
THD+N(Power rating,4Ω/kHz)%
S/N(dB)S/N(dB)
Amplifier Gain
Input connection (per channel)
input impedance
Output connection
Power Requirement
Minimum Power-up, 220 volts
DimensionsDimensions
Weight
FC SERIES
FC 2.3
2×300W
2×450W
2×600W
17.2Kg
FC 2.6
2×600W
2×800W
2×1200W
19.35Kg
20Hz-25kHz +- 0.5dB
0.1%
110dB
Fixed 32dB
3-pin XLR,Electronic balance
20kΩ Balance/10kΩ Unbalanced
Speakon(NEUTRIK)Speakon(NEUTRIK)
200-240V~50-60Hz
180-260V~50-60Hz
483×377×88mm
FC 2.8
2×800W
2×1200W
2×1600W
21.15Kg
FC 3.0
2×1000W
2×1500W
2×2200W
23.15Kg
FC 3.3
2×1300W
2×1950W
2×2600W
25.35Kg