High-quality, innovativetools that measure up
Precision Measuring Instruments
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentTABLE OF CONTENTS
Electronic Calipers.................................................... 3-4Dial Calipers....................................................................4Electronic Outside Micrometers.................................5Outside Micrometer.......................................................6Dial Test Indicators........................................................7Magnets Stands.............................................................8Digital Microscope.........................................................9ISM-PRO Software.................................................10-11Portable Hardness Tester...........................................12Electronic Height Gage...............................................13Gages & Gage Sets.....................................................14SPC Cables..............................................................15-16
2
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
CALIPERS
• Resolution: 0.0005”/ 0.01mm• Buttons: zero set, power on/off, inch/mm conversion• Automatic power off, move the digital unit to turn on
power• Battery CR2032• Meets DIN862 standard, stainless steel construction• Data output via USB (sold separately)• Supplied in fitted storage case
PART NUMBER RANGE ACCURACY l a b c d
1108-150 0-6” / 0-150mm±.0012”
9.291” .827” .630” .630” 1.575”1108-200 0-8” / 0-200mm 11.260” .945” .748” .630” 1.969”1108-300 0-12” / 0-300mm 15.748” .948” .807” .669” 2.362”
• Resolution: 0.01mm, 0.0005”, 1/128”• Buttons: unit (mm/in/fraction), ABS, on/off, zero• Absolute and incremental measurement• Battery CR2032, automatic power off• Meets DIN862 standard, stainless steel construction• Data output via SPC cable (sold separately)• Supplied in fitted storage case
PART NUMBER RANGE ACCURACY l a b c d
1102-150 0-6” / 0-150mm±.0012”
9.213” .827” .650”.630”
1.575”1102-200 0-8” / 0-200mm 11.260” .945” .748” 1.969”1102-300 0-12” / 0-300mm 15.354” 1.024” .846” 2.362”
Electronic Caliper
Electronic Caliper
1102-150
1108-150
3
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentCALIPERS
Electronic Caliper
• Resolution: 0.01mm, 0.0005”, 1/128”• Buttons: unit (mm/in/fraction), ABS, on/off, zero• Absolute and incremental measurement• Battery CR2032, automatic power off• Meets DIN862 standard, stainless steel construction• Data output via SPC cable (sold separately)• Supplied in fitted storage case
PART NUMBER RANGE ACCURACY l a b c d
1114-150 0-6” / 0-150mm±.0012”
9.291” .827” .630”.630”
1.575”1114-200 0-8” / 0-200mm 11.260” .945” .748” 1.969”1114-300 0-12” / 0-300mm 15.748” .948” .807” .669” 2.362”
PART NUMBER RANGE ACCURACY l a b c d D
1311-6 0-6” / 0-150mm ±.0015” 9.173” .827” .630”.630”
1.575”1.535” DIA1311-8 0-8” / 0-200mm
±.002”11.339”
.945”.748” 1.969”
1311-12 0-12” / 0-300mm 15.354” .768” .669” 2.520”
• Shockproof dial indicator• Made of stainless steel• Supplied in fitted storage case
Dial Caliper
1311-6
1114-150
4
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentmICROmETERS
• Resolution: .00005” / 0.001mm• IP65 dust/coolant proof• Button functions: on/off, set, inch/mm, ABS/INC,
data output • Battery SR44 or LR44, automatic power off• Ratchet stop• Supplied with spherical anvil• Data output via SPC cable (sold separately)• Supplied in fitted storage case
PART NUMBER RANGE ACCURACY l a b c
3101-25E 0-1” / 0-25mm ±.00008” 1.280” .236” .945” .118”
• Resolution: .00005” / 0.001mm• IP65 dust/coolant proof• Button functions: on/off, set, inch/mm, ABS/INC,
data output • Battery SR44 or LR44, automatic power off• Ratchet stop• Supplied with spherical anvil• Data output via SPC cable (sold separately)• Supplied in fitted storage case
PART NUMBER RANGE ACCURACY l a b
3109-25E 0-1” / 0-25mm ±.00008” 1.260” .236” 1.083”
Electric Outside Micrometer
Electric Outside Micrometer
3109-25E
3101-25E
5
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentmICROmETERS
Outside Micrometer
PART NUMBER RANGE ACCURACY l a b
3203-1 0-1”.00016”
1.260” .354” 1.102”3203-2 1-2” 2.244” .551” 1.496”
Imperial (ratchet stop type)
PART NUMBER RANGE MiCRoMETERs iNClUDED
3203-33 0-3” 3203-1A, 3203-2A, 3203-3A3203-66 0-6” 3203-1A, 3203-2A, 3203-3A,3203-4A, 3203-5A, 3203-6A
3203-1212 0-12” 3203-1A, 3203-2A, 3203-3A, 3203-5A, 3203-6A,3203-7A, 3203-8A, 3203-9A, 3203-10A, 3203-11A, 3203-12A
Imperial Sets (ratchet stop type)
• Graduation: imperial .0001 / metric 0.01mm• Carbide tips• 3202-2A supplied with setting standards• Supplied in fitted storage case
PART NUMBER RANGE ACCURACY l a b
3203-1A 0-1”.00016”
1.260” .354” 1.102”3203-2A 1-2” 2.244” .551” 1.496”3203-3A 2-3”
.0002”3.228”
.591”1.929”
3203-4A 3-4” 4.213” 2.362”3203-5A 4-5”
.00024”5.236”
.650”2.874”
3203-6A 5-6” 6.220” 3.346”3203-7A 6-7”
.00028”7.205”
.764”
4.094”3203-8A 7-8” 8.228” 4.606”3203-9A 8-9”
.00031”9.213” 5.118”
3203-10A 9-10” 10.236” 5.591”3203-11A 10-11”
.00035”11.220” 6.102”
3203-12A 11-12” 12.205” 6.614”
3203-1A
3203-2A
6
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentDIAL TEST INDICATORS
• Lugback• Supplied with tolerance index and bezel clamps• Additional lugs and contact points available• Supplied in fitted storage case
PART NUMBER RANGE GRADUATioN
ACCURACY RANGE /REv
DiAlREADiNGFiRsT 2.5 REv ovERAll
2307-1 .25” .001” .002” .002” .1” 0-100
A B C D
1.800” 2.953” .787” .984”
• Jeweled bearing• Carbide contact point• Two measuring directions• Anti-magnetic body• Supplied with two clamps: 5/32” DIA and 3/8” DIA• Additional stylus available• Supplied in fitted storage case
PART NUMBER RANGE GRADUATioN ACCURACY DiAl
READiNG A l
2380-35.03”
.0005” .0006”0-15-0
1.18” DIA.65”2380-301 .001” .001” .748”
2381-301 .0005” .0006” .768”
Dial Test Indicator
Dial Test Indicator
2380-31
2307-1
7
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentmAgNETIC STANDS
• For electronic/dial indicators and dial test indicators
PART NUMBER MAGNETiC FoRCE APPliCABlE HolDiNG sTEM REMARk
6200-60132lbf 3/8” DIA, ø 8mm, ø 4mm
WITHOUT FINE ADJUSTMENT6201-60 WITH FINE ADJUSTMENT
• For electronic/dial indicators and dial test indicators
PART NUMBER
MAGNETiC FoRCE
APPliCABlE HolDiNG sTEM REMARk
6208-80E 176lbf 3/8” DIA WITH FINE ADJUSTMENT AND DOVETAIL GROOVE
6208-80E
6200-60 6201-60
8
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentELECTRONIC HEIgHT gAgES
PART NUMBER EDP No. RANGE ACCURACY l a1 a2 b c d
Dia.
1151-300 816100 0-12”/0-300mm +/-.0016 18.701” 5.315” 1.693” 3.307” 1.299” .591”1151-450 816102 0-18”/0-450mm +/-.002 25.984” 7.087” 2.126” 3.465” 1.496” .787”1151-600 816804 024”/0-600mm +/-.002 31.890” 7.087” 2.126” 3.465” 1.496” .787”
8
1151-300
• Resolution: .001”/0.01mm• Buttons: on/off, zero, inch/mm, ABS/INC, preset+, preset-, set• ABS/INC is for absolute and incremental measurement• Carbide tipped scriber• Made of stainless steel (except for base)• SR44 or LR44 battery• Data output
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentDIgITAL mICROSCOPE
PART NUMBER sTAND TYPE MAGNiFiCATioN PiXEl illUMiNATioN PoWER sUPPlY
ISM-PM200SA STANDARD10X - 200X
1.3m(RESOLUTION:
1280X1024)
BUILT-IN ADJUSTABLE LED
USB 2.0 CABLE(VOLTAGE REQUIRED
5±0.1v)ISM-PM200SB UNIVERSAL
INCLUDES 1 PC EACH:• Digital Microscope• Stand• White/black plate• Focus support ring for 80X/150X• Focus support ring for 60X/200X• Calibration rule (graduation 0.1mm)• Calibration rule (graduation 1mm)• ISM-PRO software disc
MAGNiFiCATioN FoCUs DisTANCE
FiElD viEW ACCURACY
50X .83” .32x.25” 1.2mil100X .51” .15x.12” 0.5mil150X .63” .10x.08” 0.4mil200X .75” .07x.06” 0.3mil
9
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentISm-PRO SOFTWARE
Software for Digital MicroscopePART NUMBER ISM-PRO
• Applicable digital microscope: ISM-PM200SA, ISM-PM200SB, ISM-PM600SA, ISM-PM160L, ISMPM-160LA
• Languages: English, Japanese, Korean, German, Portuguese, Chinese• Operation systems: Windows 7/XP/Vista• Measurement:
• Edge detection measurement
• Edge detection measurement
10
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentISm-PRO SOFTWARE
• Picture measurement:
• Zoom in: Zoom in the area where the mouse arrow is positioned
• Data input to CAD or excel:
• Comparison - Create line, angle or circle with desired size to compare with work pieces
11
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentPORTABLE HARDNESS TESTER
• Supplied with impact device D• Based on Leeb (HLD), converted to
Vickers (HV), Brinell (HB), Rockwell (HRC and HRB), Shore (HS) and tensile strength (MPa)
• Connects with printer via Bluetooth• LCD display and backlight• Focus support ring for 60X/200X• Automatic power off• According to ASTM A956
INCLUDES 1 PC EACH:• Main unit• Impact Device D• Printer• Hardness test block• Focus support ring for 60X/200X• Small support ring• Cleaning brush• AC/DC adapter
PART NUMBER ISH-PHA-UMiNiMUM READiNG 1HLV, 1HV,1HB, 0.1HRC, 0.1HRB, 1HS, 1MPa
ACCURACY ±6HLD (When HLD=800)
DisPlAYLEEB (HLD), CONVERTED HARDNESS, MATERIAL IMPACT DIRECTION, TEST TIME, AVERAGE VALUE, DATE
oUTPUT BLUETOOTH
APPliCABlE WoRkPiECE
MINIMUM WEIGHT
11.02lb4.41lb (ON SOLID SUPPORT)0.22lb (COUPLED ON PLATE)
MINIMUM THICKNESS .2”MiNIMUM RADIUS OF CURVED SURFACE .43”MAXIMUM ROUGHNESS (Ra) 64µin
PoWER sUPPlY 3-AAA BATTERIES / AC 110VDiMENsioN 5.91 x 3.15 x .94”
WEiGHT 0.44lb
MATERiAl HlD Hv HB HRC HRB HsTENsilE
sTRENGTH (MPA)
STEEL & CAST STEEL 300-900 81-955 81-654 20-68 38-100 32-100 375-2639TOOL STEEL 300-840 80-898 20-67
STAINLESS STEEL 300-800 85-802 85-655 46-101CAST IRON 360-650 93-334
CAST ALUMINUM ALLOy 170-570 19-164 23-84BRASS 200-550 40-173 13-95
BRONZE 300-700 60-290COPPER 200-690 45-315
12
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentgAgES & gAgE SETS
• Measure opening, slot width, hole size, etc.• Made of stainless steel• Supplied in storage pouch
PART NUMBER RANGE GRADUATioN ACCURACY
4833-1 1/32”-5/8” 0.8mm-15mm .32x.25” 1.2mil
PART NUMBER RANGE RADiUs oF lEAvEs iNClUDED qUANTiTY oF lEAvEs
(iNTERNAl+EXTERNAl) ACCURACY
4801-15E 1-32”-1/4” 1/32”, 3/64”/ 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4” 15+15 ±.0012”
4801-16E 17/64”-1/2” 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/32”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2” 16+16 ±.0014
4801-16E1 17/32”-1” 17/32”,9/16”, 19/32”, 5/8”, 21/32”, 11/16”, 23/32”, 3/4”, 25/32”, 13/16”, 27/32”, 7/8”, 29/32”, 15/16”, 31/32”, 1” 16+16 ±.0017
PART NUMBER RANGE RADiUs oF lEAvEs iNClUDED qUANTiTY oF
lEAvEs ACCURACY
4804-25E 1/64-1/2”
1/64”, 1/32”, 3/64”/ 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 5/16”, 1/4”, 17/64”, 9/32”, 5/16”,
11/32”, 3/8”, 13/32”, 7/16”, 15/32”, 1/2”
25 ±.002”
48004-8E 9/16”-1” 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1” 8 ±.0025”
• Each piece has 3 concave and 2 convex gaging surfaces
• Supplied in storage pouch
4801-15E
13
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentSPC CABLES
• Without special software, the data can be input as keyboard signal to Excel, Word, CAD, Skype, etc.• Press the red button on the interface box or the foot switch to input data. Foot switch is optional• The interface box can accept all cables (7304-3, 7304-4, 7304-5), but can accept only one cable at a time
PART NUMBER DEsCRiPTioN APPliCABlE PRoDUCTs
7304-1 INTERFACE BOX WITH CABLE (LENGTH 80”)
7304-2 FOOT SWITCH WITH CABLE (LENGTH 60”)
7304-3 CABLE (LENGTH 20”) ELECTRONIC CALIPERS AND ELECTRONIC DEPTH GAGES
7304-4 CABLE (LENGTH 20”) ELECTRONIC MICROMETERS (EXCEPT 3108 AND 3109)
7304-5 CABLE (LENGTH 20”) ELECTRONIC INDICATORS
7304-1 7304-2 7304-3
14
U.S. 800-626-6653 n Canada 800-387-6600 n [email protected] n www.dme.net
page contentSPC CABLES
• Without special software, the data can be input as keyboard signal to Excel, Word, CAD, Skype, etc.• Press the red button on the interface box to input data. • Connects to computer via USB port• Cable length 100”
PART NUMBER APPliCABlE PRoDUCTs
7302-SPC1 ELECTRONIC CALIPERS AND ELECTRONIC DEPTH GAGES
7302-SPC2 ELECTRONIC MICROMETERS (EXCEPT 3108 AND 3109)
7302-SPC3 ELECTRONIC INDICATORS
PART NUMBER APPliCABlE PRoDUCTs
7301-SPC1 LARGE ELECTRONIC CALIPERS 1131 (TyPE B), 1133 (TyPE B)7301-SPC2 ELECTRONIC HEIGHT GAGES 11517301-SPC4 ELECTRONIC CALIPERS 11027301-SPC5 ELECTRONIC HEIGHT GAGES 1150
7302-SPC2
7301-SPC1
15
page content
World Headquarters DME Company29111 Stephenson Highway Madison Heights, MI 48071800-626-6653 toll-free tel 248-398-6000 tel 888-808-4363 toll-free fax [email protected] e-mail
DME Company6210 Northwest Drive Mississauga, Ontario Canada L4V 1J6800-387-6600 toll-free tel 905-677-6370 tel 800-461-9965 toll-free fax [email protected] e-mail
DME de MexicoCircuito el Marqués Norte, No. 55 Parque Industrial El MarquésEl Marqués, QuerétaroCP 7624652 442 713 5666 tel [email protected] e-mail
As an iNsiZE distributorDME has the capabilities of providingyou with any iNsiZE Measuring Tool.
if you do not see what you require in this catalog please ask us. For a full line of
iNsiZE products visit www.insize-usa.com