S C R E E D M A C H I N E S Development – Production – Marketing
PRODUCT CATALOGUE
GENERAL OVERVIEW
| 3 2 |
Any questions?Interested in an offer?Looking for advice?
Please call us:Phone: +49 (0) 5242 9646-0
or write to us:[email protected]
www.bmsbaumaschinen.de
Our premium partnersDEKRA- and TÜV-base
| 3 2 |
BMS – THE EXPERT FOR SCREEDMACHINES.
CONSTRUCTIONAND DEVELOPMENT
PRODUCTIONMADE IN GERMANY
REPARATION, SERVICE,MAINTENANCE
We develop and construct robust and very durable products for the screed craft. Our business focuses on the production and marketing of SCREED MACHINES. Our machines have been brought to perfection in every detail and deliver high performance on a daily basis.
BMS is known for innovation, technical competence, reliability and quality as well as for expert service and personal support. A seal of quality for professionals around the world – a point of honour for us: our products are “made in Germany“.
Since the foundation of our firm we have been active on an international scale. Our machines have been working reliably and with great success in more than 30 coun-tries. Our dynamic corporate development confirms our significance in the industry.
DEALER NETWORK ANDWORKSHOP PARTNERS
COMPREHENSIVESERVICE
G
E R M A N
Y
M
ADE IN
Our premium partners
| 5 4 | 4 |
| 5 4 |
BMS PRODUCT CATALOGUE – CONTENT
Page
Screed machines – diesel (pneumatic conveyors) 7
BMS alpha Z3 8
BMS alpha Z4 10
BMS alpha Z3 Styrofoam 12
Screed machines – electric (pneumatic conveyors) 14
BMS alpha E32 18
BMS alpha E63 16
Models/Additional equipment 20
Special paintings/Customer labelling 20
Floating screed machines (screw conveyors)
BMS alpha Z3 / Z4 FLUID (diesel) 22
BMS FLUID PUMP (diesel) 24
BMS FLUID E32 (electric) 26
BMS FLUID E63 (electric) 28
Construction compressors
BMS alpha air 30
BMS special machinery for
composition floor layers 32
BMS compulsory mixer for construction and industry 32
BMS silo machines 33
Power trowels
BMS Innova 3100 34
BMS Innova 3300 FG 35
BMS Innova 3200 F 35
Please order our folders for detailed information on the
individual products.
| 5
| 7 6 |
| 7 6 |
BMS SETS STANDARDS.
ALPHA SCREED MACHINES
DIESEL MODELS.
FIRST-CLASS WORKMANSHIP
high quality, functional and robust.
LONG-LASTING STAINLESS STEEL HOODS
enormously sturdy with a high-class visual appearance.
PERFECT PERFORMANCE
due to the powerful 3-cylinder Deutz engine
and the made-to-measure BMS compressor.
ECONOMICAL
at attractive pricing.
GROUND-BREAKING PATENTED COOLING SYSTEM
better cooling performance via two hydraulic fans.
HIGHEST SECURITY STANDARD
tested and certified in accordance with German TÜV proceedings.
BEST NOISE/ ENVIRONMENTAL PROTECTION
low emission engine, significantly reduced outgoing air noises of the fan.
| 9 8 |
New Design, new technology, improved performance, better safety. The patented cooling system constitutes the most essential innovation of the alpha Z3. Its cooling capacity is generated by two hydraulically driven fans. The 3-cylinder Deutz engine with 36,5 kW is powerful and efficient. The compressor was developed by BMS, made-to-measure and optimized for the alpha Z3. If you buy an alpha Z3 you will get a screed machines of the highest quality – made in Germany. The perfect product for heavy use on construction sites.
ALPHA Z3. NEW DESIGN – NEW TECHNOLOGY.
TECHNICAL FACTS
FEEDER/SCRAPERFEEDERSTANDARD
max. Conveyance pressure 8,5 bar 8,5 bar 8,5 bar
Conveying distance* 200 m 200 m 200 m
Conveyor height* 30 floors 30 floors 30 floors
Compressor BMS > 5 m3/min BMS > 5 m3/min BMS > 5 m3/min
Drive motor Deutz D2011 L03 Deutz D2011 L031 Deutz D2011 L03
36,5 kW 36,5 kW 36,5 kW
Chassis/Axle 1.900 kg 1.900 kg 2.500 kg
Weight
(depending on equipment) 1.600 kg 1.900 kg 2.150 kg
Length 4.500 mm 4.970 mm 4.970 mm
Width 1.500 mm 1.560 mm 1.560 mm
Height 1.710 mm 2.250 mm 2.250 mm
Fill level 920 mm 450 mm 450 mm
max. grain size 16 mm 16 mm 16 mm
Pressure joint VT 70 VT 70 VT 70
Feeder volume – 310 litres 310 litres
Tank capacity 60 litres 60 litres 60 litres
Patented cooling system
SCREED MACHINES – DIESEL
8 | * The data is based on experience and is dependent on the material used. Construction and design are subject to technical alterations, errors and printing errors excepted.
| 9 8 |
GET MORE FOR YOUR MONEY. ADDITIONNAL EQUIPMENT.
+ Adjustable regulation of mixing time+ Longlife plates (8 mm thick)+ High-strength reinforced plates (10 mm thick)+ Plastic dished heads+ Two galvanized filter cages for the cooling system,
provided with a magnetic base and filter caps+ Spray pistol/cleaning pistol+ Special paintings+ Customer labelling+ Lifting eye nuts+ Rear canvas
Easy belt replacement at the mixer
Shutdown dome sieve at the inner compartment
Pivoting safety guard
IMPROVED SAFETY. INCOMPARABLE COMFORT.
| 9
BMS ALPHA Z3
AVAILABLEIN MODELS
STANDARD
FEEDER
FEEDER / SCRAPER
✓ Stable fenders suited for deposal
✓ Lockable toolbox
✓ Integrated working light
✓ Height adjusting coupling device
✓ Sturdy chassis with mechanical overrun brakes
and central height adjustment
✓ 1,9 t axle or 2,5 t as standard equipment
✓ Sound power level according to
guideline 2000/14/EG
✓ High-strength wear plates
✓ Safety shutdown at the dome sieve
✓ Automatic 2-bar shutdown
✓ Easy belt replacement at the mixer
✓ Mixing vessel from in-house manufacturing
✓ Stable and long-lasting
stainless steel hood
✓ Highly rust resistant EPD-coated frame
✓ Refuelling made easy, tank filler neck
on the outside
| 11 10 |
Economical, robust and user-friendly:Alpha Z4 is especially suited for big projects: It is equipped with a powerful 4-cylinder Deutz engine of 36,5/46 kW that is very efficient and robust. Of course, the engine complies with current emission regulations. Outgoing air noises of the fan have been reduced by 60 percent.
Alpha Z4 is the right choice for anyone needing to pump quickly despite greater hose lengths.
ALPHA Z4. IMPROVED PERFORMANCE DUE TO ROTATION SPEED.
TECHNICAL FACTS
FEEDER/SCRAPERFEEDERSTANDARD
max. Conveyance pressure 8,5 bar 8,5 bar 8,5 bar
Conveying distance* 200 m 200 m 200 m
Conveyor height* 30 floors 30 floors 30 floors
Compressor BMS > 5 m3/min BMS > 5 m3/min BMS > 5 m3/min
Drive motor Deutz D2011 L04 Deutz D2011 L04 Deutz D2011 L04
36,5 kW/46 kW 36,5 kW/46 kW 36,5 kW/46 kW
Chassis / Axle 1.900 kg 1.900 kg 2.500 kg
Weight
(depending on equipment) 1.600 kg 1.900 kg 2.150 kg
Length 4.500 mm 4.970 mm 4.970 mm
Width 1.500 mm 1.560 mm 1.560 mm
Height 1.710 mm 2.250 mm 2.250 mm
Fill level 920 mm 450 mm 450 mm
max. grain size 16 mm 16 mm 16 mm
Pressure joint VT 70 VT 70 VT 70
Feeder volume – 310 litres 310 litres
Tank capacity 60 litres 60 litres 60 litres
SCREED MACHINES – DIESEL
10 | *All data is based on experience and is dependent on the material used. Construction and design are subject to technical alterations, errors and printing errors excepted.
| 11 10 |
ALPHA Z4. IMPROVED PERFORMANCE DUE TO ROTATION SPEED.
GET MORE FOR YOUR MONEY. ADDITIONNAL EQUIPMENT.
BMS ALPHA Z4
+ Adjustable regulation of mixing time+ Longlife plates (8 mm thick)+ High-strength reinforced plates (10 mm thick)+ Plastic dished heads+ Two galvanized filter cages for the cooling system, provided with
a magnetic base and filter caps+ Spray pistol/cleaning pistol+ Special paintings+ Customer labelling+ Lifting eye nuts+ Rear canvas
Height adjustable coupling device
Fender with additional value
Refuelling made easy
| 11
IMPROVED SAFETY. INCOMPARABLE COMFORT.AVAILABLEIN MODELS
STANDARD
FEEDER
FEEDER/SCRAPERIntegrated working light
✓ Stable fenders suited for deposal
✓ Lockable toolbox
✓ Integrated working light
✓ Height adjusting coupling device
✓ Sturdy chassis with mechanical overrun brakes
and central height adjustment
✓ 1,9 t axle or 2,5 t as standard equipment
✓ Sound power level according to
guideline 2000/14/EG
✓ High-strength wear plates
✓ Safety shutdown at the dome sieve
✓ Automatic 2-bar shutdown
✓ Easy belt replacement at the mixer
✓ Mixing vessel from in-house manufacturing
✓ Stable and long-lasting
stainless steel hood
✓ Highly rust resistant EPD-coated frame
✓ Refuelling made easy, tank filler neck
on the outside
| 13 12 |
BMS alpha Z3 Styrofoam has been constructed for the economical mixing and laying of light floor screed materials such as Styrofoam for insulation purposes. BMS alpha Z3 Styrofoam is equipped with a 650 litres mixing vessel. The large vessel allows for light screed floor materials to be laid quicker and more efficiently.Additionally, the Styrofoam machine disposes of special filter cages for the alpha cooling system to prevent the Styrofoam from clogging the fans. BMS alpha Z3 Styrofoam is particularly efficient with Styrofoam units of 500 litres.
ALPHA Z3 STYROFOAM. FOR MULTIPLE USE.
TECHNICAL FACTS
EQUIPMENT FEATURESSTYROFOAM
Conveyance pressure 8,5 bar
Conveying distance * 200 m
Conveyor height* 30 Etagen
Compressor BMS > 5 m3/min
Drive motor Deutz D2011 L03
36,5 kW
Chassis / Axle 2.500 kg
Weight
(depending on equipment) 2.150 kg
Length 4.500 mm
Width 1.500 mm
Height 1.710 mm
Fill level 920 mm
max. grain size 16 mm
Pressure joint VT 70
Feeder volume –
Tank capacity 60 litres
• 650 litres mixing vessel, 10 mm wall thickness, coated with high-strength wear plates, large funnel, additional maintenance lid, specific mixer.
• 3-cylinder Deutz motor, 36,5 kW, large compressor with approx. 5 m³/min air pressure performance, max. 8,5 bar.
• Cooling system with two hydraulically driven fans and specific filter cages preventing clogging of the fans with Styrofoam.
• Raised chassis suspension with a sturdy axle and a large brake system.
SCREED MACHINES – DIESEL
12 |
STYROPOR
* All data is based on experience and is dependent on the material used. Construction and design are subject to technical alterations, errors and printing errors excepted.
| 13 12 |
GET MORE FOR YOUR MONEY. ADDITIONNAL EQUIPMENT.
BMS ALPHA Z3 STYROPOR
+ Automatic water dosage, adjustable water quantities+ Large funnel facilitating filling in 500 litre sacks+ Silo rotary flap – for quick filling of the vessel+ Additional manhole cover for maintenance at the vessel+ Additional cleaning outlet at the vessel+ Spray pistol/ cleaning pistol + Special paintings+ Customer labelling+ Rear canvas
IMPROVED SAFETY. INCOMPARABLE COMFORT.
✓ Safety shutdown at the dome sieve
✓ Easy belt replacement at the mixer
✓ Mixing vessel from in-house manufacturing
✓ Stable and long-lasting stainless
steel hood
✓ Highly rust resistant
EPD-coated frame
✓ Refuelling made easy,
tank filler neck on the outside
✓ Stable fenders suited for deposal
✓ Lockable toolbox
✓ Integrated working light
✓ Height adjusting coupling device
✓ Sturdy chassis with mechanical overrun
brakes and central height adjustment
✓ 2,5 t axle as standard equipment (standard)
✓ Sound power level according to guideline
2000/14/EG
✓ High-strength wear plates
✓ Two galvanized filter cages for the cooling system, provided with a magnetic base and filter caps
| 13
BMS alpha Z3 Styrofoam may equally be equipped for conveying cement screed.
| 15 14 | 14 |
| 15 14 | | 15
POWERFUL FUTURE.
PRODUCTS WITH ELECTRICENGINES.VERY ECONOMICAL. NO FUEL CONSUMPTION.
The electrically driven screed machines run on
conventional construction site power.
VERY QUIET. NO CO2 EMISSIONS.
Work possible anytime without noise disturbance.
There is no vehicle exhaust or particular matter pollution.
VERY LOW MAINTENANCE COSTS.
Service jobs on the engine are not necessary.
HIGHEST SAFETY STANDARDS.
Tested and certified by German TÜV.
PROFITABLE. ATTRACTIVE PRICING.
Purchase costs of the machines are not essential higher than
for the diesel models. They amortise much quicker due to the
use of construction site power.
HIGH QUALITY. FIRST-CLASS WORKMANSHIP.
All screed floor conveyors are functional and sturdy – made in Germany.
LONG-LASTING STAINLESS STEEL HOODS.
We use stainless steel of the highest quality.
Vessel and storage unit are manufactured in-house.
| 17 16 | 16 |
Alpha E32 is particularly of interest for composition floor layers working on construction sites where 63 A plugs are not available. The electric machine is adjustable to 25 or 32 Ampere. It can be connected to every power distribution on construction sites providing a 400 volts /32 ampere socket. The compressor is driven by an 11 kW Siemens engine. The use of a frequency converter allows the frequency-regulated electric engine to produce its full power. Alpha E32 operates according to the air accumulator principle. It is very quiet and low in energy consumption. The machine amortises itself in very short time on using the electricity supply on the construction sites. Up to a hose length of 80 metres its performance is comparable to the one of a 3-cylinder diesel machine.
BMS ALPHA E32. QUIET AND ECONOMICAL.
TECHNICAL FACTS
FEEDER/SCRAPERFEEDERSTANDARD
Conveyance pressure 6 bar 6 bar 6 bar
Conveying distance* up to 80 m up to 80 m up to 80 m
Reservoir 580 litre 580 litre 580 litre
Compressor 2,2 m3 / min 2,2 m3 / min 2,2 m3 / min
Drive motor 11 kW / 5,5 kW 11 kW / 5,5 kW 11 kW / 5,5 kW
Chassis/Axle 1.900 kg 1.900 kg 2.500 kg
Weight approx. 1.600 kg approx. 1.900 kg approx. 2.150 kg
Length 4.500 mm 4.970 mm 4.970 mm
Width 1.500 mm 1.560 mm 1.560 mm
Height 1.710 mm 2.250 mm 2.250 mm
Fill level 920 mm 450 mm 450 mm
Max. grain size 16 mm 16 mm 16 mm
Pressure joint VT 70 VT 70 VT 70
Feeder volume – 310 litres 310 litres
E32
E32
SCREED MACHINES – ELECTRIC
* All data is based on experience and is dependent on the material used. Construction and design are subject to technical alterations, errors and printing errors excepted.
| 17 16 | | 17
ADVANTAGES. ADDITIONNAL EQUIPMENT.
BMS ALPHA E32
+ Automatic regulation of mixing time + Plastic dished heads+ Galvanized filter cage for the cooling
system, provided with a magnetic base and filter caps
+ Longlife plates (8 mm thick)+ Spray pistol/cleaning pistol+ Electric cable+ Special paintings+ Customer labelling+ Lifting eye nuts+ Rear canvas
HIGHEST QUALITY. LATEST TECHNOLOGY.
E32
AVAILABLEIN MODELS
STANDARD
FEEDER
FEEDER/SCRAPER
✓ Safety shutdown at the dome sieve
✓ Automatic 2-bar shutdown
✓ Mixing vessel from in-house manufacturing
✓ Stable and long-lasting stainless steel hood
✓ Highly rust resistant EPD-coated frame
✓ Stable fenders suited for deposal
✓ Lockable toolbox
✓ Integrated working light
✓ Height adjusting coupling device
✓ Sturdy chassis with mechanical overrun
brakes and central height adjustment
✓ 1,9 t or 2,5 t axle as standard equipment
| 19 18 | 18 |
Alpha E63 has been developed particularly for the use on construction sites with conventional electricity supply. With its frequency regulated three-phase current engine the alpha Energy Plus can be connected to every power distribution provided on construction sites. Operational safety is guaranteed at all times. Performance may be adjusted from 50 to 63 Ampere on site. The 30 kW variable frequency engine lends alpha Energy plus all its power without producing exhaust pollution or CO2 emissions. Moreover, noise development is reduced significantly.
In countries with sufficient power supply on construction sites, such as Switzerland for example, the machine functions as well on 63 Ampere construction site power without frequency converter by only using a conventional star-delta switch.
BMS ALPHA E63. ELECTRICAL POWER.
TECHNICAL FACTS
FEEDER/SCRAPERFEEDERSTANDARD
Conveyance pressure 8 bar 8 bar 8 bar
Conveying distance* ca. 180 m ca. 180 m ca. 180 m
Compressor ca. 4,5 m3/min ca. 4,5 m3/min ca. 4,5 m3/min
Drive motor Siemens 30 kW Siemens 30 kW Siemens 30 kW
Chassis/Axle 1.900 kg 1.900 kg 2.500 kg
Weight approx. 1.600 kg approx. 1.900 kg approx. 2.150 kg
Length 4.500 mm 4.970 mm 4.970 mm
Width 1.500 mm 1.560 mm 1.560 mm
Height 1.710 mm 2.250 mm 2.250 mm
Fill level 920 mm 450 mm 450 mm
max. grain size 16 mm 16 mm 16 mm
Pressure joint VT 70 VT 70 VT 70
Feeder volume – 310 litres 310 litres
E63
E63
SCREED MACHINES – ELECTRIC
* All data is based on experience and is dependent on the material used. Construction and design are subject to technical alterations, errors and printing errors excepted
| 19 18 | | 19
ADVANTAGES. ADDITIONAL EQUIPMENT.
BMS ALPHA E63
+ Automatic regulation of mixing time + Longlife plates (8 mm thick)+ High-strength reinforced plates (10 mm thick)+ Plastic dished heads+ Galvanized filter cage for the cooling system,
provided with a magnetic base and filter cap+ Spray pistol/cleaning pistol+ Electric cable+ Special paintings + Customer labelling+ Lifting eye nuts+ Rear canvas
The 30 kW variable frequency engineConnection for construction site power
FROM EXPERTS. THOUGHT THROUGH TO THE SMALLEST DETAIL.
E63
AVAILABLEIN MODELS
STANDARD
FEEDER
FEEDER/SCRAPER
✓ Integrated working light
✓ Height adjusting coupling device
✓ Sturdy chassis with mechanical overrun
brakes and central height adjustment
✓ 1,9 t or 2,5 t axle as standard equipment
✓ High-strength wear plates
✓ Safety shutdown at the dome sieve
✓ Automatic 2-bar shutdown
✓ Easy belt replacement at the mixer
✓ Mixing vessel from in-house manufacturing
✓ Stable and long-lasting stainless steel hood
✓ Highly rust resistant EPD-coated frame
✓ Stable fenders suited for deposal
✓ Lockable toolbox
| 21 20 | 20 |
Our made-to-measure equipment variants are listed below. It is your choice. The product range offers many configurations for screed machines so you can choose the model best suited for your crew. We produce on customer demand, made-to measure and precisely tailored to your requirements.
LATEST TECHNOLOGY FOR SCREED MACHINES. MODELS.
INDIVIDUALITY. SPECIAL PAINTINGS AND CUSTOMER LABELLING.
STANDARD
✓ For operation with shovel
✓ Including a practical funnel tube
FEEDER
✓ Various models
✓ Single or double acting cylinder
FEEDER/SCRAPER
✓ Various models
✓ Scraper shovels in various shapes
✓ Scrapers equipped with an 8 mm towing wire
✓ Adjustable scraper speed
✓ Operation with or without remote unit or cable
SCREED MACHINES MODELS
Tell us your ideas, and we will implement them.
| 21 20 | | 21
YOUR ADVANTAGES.
ADDITIONAL EQUIPMENTS.
Longlife plates8 mm thick
Plastic dished headshighly wear resistant synthetic material
Filter cages for operating Styrofoam
Reinforced platesSix-piece high-strength welded plates 10 mm thick
Lifting eye nuts for safe load lifting
Spray pistol/cleaning pistolfor easy cleaning of the screed machines
Rear canvasfor protection against dirt
EQUIPMENT, SPARE PARTS, WEAR PARTSUse the large range of BMS equipment as well as of spare and wear parts. Sent directly from the factory – often from our own production. Factory-fitted in original BMS-quality – mostly from our in-house manufacturing. Place your order under Phone: +49 (0) 5242 9646-0
| 23 22 |
Based on the alpha-series, this floating screed machine is equally equipped with the proven and patented alpha-cooling system. Its cooling capacity is generated by two hydraulically driven fans.The oil-cooled Deutz engine with 36,5 / 46 kW is powerful and efficient. The rotation speed can be set manually via a lever so that the performance can be adjusted individually.
The robust and high-performance hydraulic system has been developed by BMS. The hydraulic
ALPHA Z3 OR Z4 FLUID. FOR BIG PROJECTS.
TECHNICAL FACTS
4-CYLINDER ENGINE3-CYLINDER ENGINE
Max. conveyance pressure 40 bar 40 bar
Conveying distance* 200 m 200 m
Conveyor height* 30 floors 30 floors
Conveying capacity > 20 m3/h > 20 m3/h
Drive engine Deutz D2011 L03 Deutz D2011 L04
36,5 kW 36,5 kW / 46 kW
Chassis/Axle 1.900 kg 1.900 kg
Weight (depending
on equipment) 1.500 kg 1.550 kg
Length 4.300 mm 4.300 mm
Width 1.500 mm 1.500 mm
Height 1.710 mm 1.710 mm
Fill level 930 mm 930 mm
Hopper capacity 400 litres 400 litres
Max. grain size 12 mm 12 mm
Tank capacity 60 litres 60 litres
Optionally with 3- or 4-cylinder engineThe 400 l mixing vessel
FLOATING SCREED MACHINES – DIESEL
22 | * All data is based on experience and is dependent on the material used. Construction
and design are subject to technical alterations, errors and printing errors excepted.
Z3 / Z4 FLUID
system is controlled directly and therefore particularly efficient, making the machine easy to handle and ensuring a workflow without in-terruptions. An additional agitator shaft keeps the material in constant movement, thus pre-venting it from getting stuck. Moreover, the mixing vessel can be filled from three sides.
| 23 22 |
GET MORE FOR YOUR MONEY. ADDITIONAL EQUIPMENT.
+ Power generator 5 kW / 16 kW
+ Vibrator for the strainer
+ Feeder or Feeder/Scraper with automatic water dosing
+ Dry-run protection
+ Registration for 100 km/h
+ Special paintings
+ Customer labelling
+ Rear canvas
Manual engine speed control
Additional agitator shaft in the hopper
Equally available with feeder/scraperOur newly developed hydraulic system
BETTER SAFETY. UNRIVALLED COMFORT.
✓ Conveying speed continuously adjustable
✓ Manometer in the pressure joint
✓ Lockable toolbox
✓ Integrated working light
✓ Height adjusting coupling device
✓ Sturdy chassis with mechanical overrun brakes and
central height adjustment
✓ 1,9 t axle as standard equipment
✓ Sound power level according to guideline 2000/14/EG
✓ Safety shutdown at the mixing vessel
✓ Stable and long-lasting stainless steel hood
✓ Highly rust resistant EPD-coated frame
and hopper
✓ Refuelling made easy, tank filler neck on the
outside
✓ 6-channel radio remote control
✓ Left/ right spinning function of the screw
conveyor
✓ Additional agitator shaft in the hopper
| 23
BMS ALPHA Z3 OR Z4 FLUID
| 25 24 | 24 |
BMS FLUID PUMP. PUMPING MADE EASY.
TECHNICAL FACTS
FLOATING SCREED MACHINES – DIESEL
Drive Deutz D2011 L03
31,5 kW
Hydraulic pump conveying capacity continuously adjustable
Spiral pump Typ BMS 15 optionally another model depending on grain size
Direction of rotation screw pump spinning direction left or right
Conveying capacity* up to 15 m3/h
Conveying speed hydraulic, continuously adjustable drive
Volume mixing vessel 250 litres
Weight 950 kg
Tank capacity 40 litres
Chassis KNOTT
- with mechanical overrun brakes
- One handle chassis height adjustment 1,0 t axle
- Lighting in 12 Volt or 24 Volt
- Ball coupling or DIN-towing eye
*All data is based on experience and is dependent on the material used. Construction and design are subject to technical alterations, errors and printing errors excepted.
The pumping station, BMS FLUID PUMP completes our portfolio of floating screed machines. The screw conveyor supplies a performance up to 15 m³/h and can be chosen according to grain size.
The floating screed machine by BMS is perfectly suited for conveying floating screed economically and efficiently. It is easy to use and very sturdy. The 3-cylinder Deutz diesel engine is long-lasting and highperforming.
BMS FLUID PUMP
| 25 24 | | 25
BMS FLUID PUMP. PUMPING MADE EASY.
ADVANTAGES. ADDITIONAL EQUIPMENT.
BMS FLUID PUMP
+ Vibrator for the strainer+ Manometer in the pressure joint+ Special paintings+ Customer labelling
ESPECIALLY DESIGNED FOR FLOATING SCREED APPLICATIONS.
✓ 3-cylinder Deutz dieselmotor, 31,5 kW performance
Conveying capacity up to 15 m³ per hour
✓ Special screw conveyor: BMS 15 (up to 12 mm grain size), conveyance pressure up to max. 40 bar
✓ Conveying speed continuously adjustable
✓ Left/right spinning function of the screw conveyor
✓ Hood, rear superstructure and rear panel made of stainless steel
✓ 6-channel radio remote control
| 27 26 | 26 |
The small floating screed machine is suited for pumping floating screed material. It is driven by a 7,5 kW engine. It can be connected to every power distribution on construction sites providing a 400 volts/16 or 32 ampere socket.
The BMS FLUID E32 is of interest for composition floor layers who are not permanently working on big projects. The machine covers a pumping distance of 100 m and supplies a conveying capacity of up to 10 m³/h.
All advantages in a nutshell: no maintenance, no costs for diesel fuel, no brake. Towing only requires a driving license for passenger cars. Large opening for easy cleaning, sturdy pivoting grid.
BMS FLUID E32. SMALL, COMPACT, ELECTRICAL.
TECHNICAL FACTS
FLOATING SCREED MACHINES – ELECTRIC ENGINE
Motor electric motor 7,5 kW 16A / 32A
Conveying speed conveying speed continuously adjustable
Stator/rotor „RED FIRE – BMS“
Conveying capacity* up to 10 m³/h
Hopper volume approx. 120 litres
Weight less than 450 kg
Chassis no brake, height-adjustable, 100 km/h
STANDARD
* All data is based on experience and is dependent on the material used. Construction and design are subject to technical alterations, errors and printing errors excepted.
BMS FLUID E32
| 27 26 | | 27
ADVANTAGES. ADDITIONAL EQUIPMENT.
+ Vibrator for the strainer+ Manometer in the pressure joint+ Special paintings+ Customer labelling+ Registration for 100 km/h
The 120 litres hopper Red Fire screw conveyor Large opening for cleaning
THE SMALL PUMP STATION. CONVINCING ELECTRICAL ENGENEERING.
✓ 7,5 kW frequency-regulated electric motor, 400 volts
✓ Suitable for connection to every power distribution on
construction sites providing 16 A or 32 A
✓ Left/right spinning function of the screw conveyor
✓ Large opening for easy cleaning
✓ Pivoting folding and very sturdy grid
✓ Solid chassis
✓ Safety grid – safety shutdown
✓ Lighting in 12 Volt or 24 Volt
✓ Ball coupling or DIN-towing eye
✓ 4-channel radio remote control
BMS FLUID E32
| 29 28 | 28 |
This floating screed machine is a bigger version of the electric FLUID E32, a machine used for pumping the material on the construction site that has been successfully on the market for years already. The electric machine is driven by a 22 kW engine. It can be connected to every power distribution on construction sites providing a 400 volts / 32 or 63 ampere three-phase – A. C. socket. If there is no 63 Ampere connection available, the machine can equally be supplied with 32 Ampere power. The machine covers a pumping distance of 150 m and supplies a conveying capacity of up to 15 m³/h. This makes her almost equal to the 3-Cylinder diesel pump. It is very quiet and low in energy consumption with an excellent price/ performance ratio.
All advantages in a nutshell: no maintenance, no costs for diesel fuel, no brake. Towing only requires a driving license for passenger cars. Large opening for easy cleaning, sturdy pivoting grid.
BMS FLUID E63. COMPACT, ECONOMICAL, ELECTRIC.
TECHNICAL FACTS
FLOATING SCREED MACHINES – ELECTRIC
Engine electric engine 22 kW 32A / 63A
Conveying speed conveying speed continuously adjustable
Stator/rotor „RED FIRE – BMS“
Conveying capacity* up to 15 m³/h
Hopper volume approx. 120 litres
Weight less than 750 kg
Chassis no brake, height adjustable, registration for 100 km/h
BMS FLUID E63
STANDARD
* All data is based on experience and is dependent on the material used. Construction and design are subject to technical alterations, errors and printing errors excepted
The 22 kW electric engine With practical radio remote control
| 29 28 | | 29
ADVANTAGES. ADDITIONAL EQUIPMENT.
THE PRACTICAL PUMPING STATION. FOR FLOATING SCREED APPLICATIONS.
✓ 22 kW frequency-regulated electric motor, 400 volts
✓ Suitable for connection to every power distribution on construction sites providing 32A or 63A
✓ Left/right spinning function of the screw conveyor
✓ Manometer in the pressure joint
✓ Large opening for easy cleaning
✓ Pivoting and very sturdy grid
✓ Sturdy passenger car chassis
✓ Safety grid – safety shutdown
✓ Lighting in 12 volt or 24 volt, ball-head hitch or DIN towing eye
✓ 4-channel remote control
Large opening for cleaning Red Fire screw conveyor The 120 litres hopper
BMS FLUID E63
+ Vibrator for the strainer+ Manometer in the pressure joint+ Registration for 100 km/h + Special paintings + Customer labelling
| 31 30 | 30 |
Taking BMS alpha Z3 as a model, we have developed a compressor for the construction industry. It has been conceived for multiple use in the construction industry. The compressor is driven by a 3-cylinder Deutz motor with 36,5 kW.
The powerful compressor supplies an air pressure performance up to 6 m³/min. This mobile compressor is versatile and supplies your construction site unfailingly with compressed air in sufficient amounts.
BMS ALPHA AIR. THE COMPRESSOR FOR THE CONSTRUCTION INDUSTRY
TECHNICAL FACTS
CONSTRUCTION SITE COMPRESSORS
Air pressure performance* 6 m³/min
Drive motor Deutz D2011 L03
36,5 kW / 46 kW
Weight approx. 850 kg
Chassis/axle 1.000 kg
Length ca. 3.000 mm
Width 1.500 mm
Height 1.710 mm
Tank capacity 60 litres
AIR
* All data is based on experience and is dependent on the material used. Construction and design are subject to technical alterations, errors and printing errors excepted.
| 31 30 | | 31
ADVANTAGES. ADDITIONAL EQUIPMENT.
+ Air dryer+ Pneumatic hammer+ Lifting eye-nuts+ Special paintings+ Customer labelling
COMPRESSED AIR. IMPRESSIVE PERFORMANCE.
✓ Strong, reliable, economical
✓ Stable and long-lasting stainless steel hood
✓ Highly rust resistant EPD-coated frame
✓ Easy maintenance
✓ 3-cylinder Deutz dieselmotor
✓ Large BMS compressor 6 m³/min
BMS ALPHA AIR
| 33 32 |
SPECIAL MACHINERY
FOR COMPOSITON FLOOR LAYERS
BMS FLUID PUMP. XXL SPECIAL EDITION.
COMPOSITION FLOOR LAYERS
SPECIAL MACHINERY
YOUR FLOOR SCREED CONVEYOR MUST MEET SPECIAL REQUIREMENTS?
STANDARD MODELS WILL NOT DO FOR YOU?
TAKING OUR POWERFUL CONSTRUCTIONS SUCH AS, FOR EXAMPLE,
BMS ALPHA Z3 AS A MODEL, WE DEVELOP MADE-TO-MEASURE SOLUTIONS BASED
ON YOUR PARTICULAR SPECIFICATIONS.
We offer you our mixing kettle for construction and industry work according to application:Drive and geared motors from 5.5 kW to 24 kW, boiler sizes 130 liters to 650 liters capacity.
BMS COMPULSORY MIXER. FOR CONSTRUCTION AND INDUSTRY.
32 |
Equipped with rail and crane eye for stacker loading
Equipped with chassis for transport with towing vehicle
For big jobs: equipped with a 650 Litres vessel
| 33 32 |
BMS SINGLE COMPARTMENT SILO MACHINES
BMS DOUBLE COMPARTMENT SILO MACHINES
DRIVEN BY INFO-DAT-CONTROL
PREPARATION FOR MAI-CONTROLEach machine in silo version can also be equipped with an additional conventional lid. This allows the machine to be used as a standard version.
We produce silo machines in various versions. You can choose between hydraulic, pneumatic or electrical control systems for the silo flap. Standard equipment includes automatic water dosing. Any of the alpha screed machines may be converted for silo use. The control is optionally carried out with Info-Dat-Control or Mai-Control.
BMS. SPECIALIST FOR SILO MACHINES
BMS COMPULSORY MIXER. FOR CONSTRUCTION AND INDUSTRY.
| 33
| 35 34 | 34 |
Wherever the handling of high-quality screed surfaces is concerned, BMS INNOVA 3100 offers theperfect solution for sanding and smoothing. Ergonomically shaped handles and continuously adjustableleading arms guarantee a long period of non-tiring work. The sturdy tubular construction as well as thepowerful electric motor guarantee for a workflow without interruptions. The sturdy multi-purposemachine for construction sites is easy to handle and versatile.Impressive advantages: grinding, ablating, roughening and smoothing – one machine can do it all.
THE FOLLOWING GRINDING AND SMOOTHING PLATES ARE AVAILABLE:
Typ G 6001 with wavy edgeTyp G 6002 with bevelled edgeTyp G 6003 with bevelled edge, suitable for quick-change systemTyp G 6004 with wavy edge, suitable for quick-change systemTyp G 6103 with bevelled edge and large plateTyp Special plate made of solid material, heavy, for high compression
Each trowel plate is compatible with every machine of the INNOVA power trowel series.
BMS INNOVA 3100
PRACTICAL COMFORT
✓ Powerful maintenance-free gear motor 1,1 kW, 230 Volt
✓ On demand extension cable permanently connected
✓ Protection for capacitors for the prevention of damages
✓ Easy handling due to continuously adjustable leading arms
✓ Foldable carrying handle
✓ Easy handling enables best trowelling results
✓ Power trowel – on demand with foldable wheels
✓ Spinning direction of trowel right or left
✓ Quick release fastener or tightly screwed tool holder
BMS INNOVA 3100 – POWER TROWELS
POWER TROWELS
| 35 34 | | 35
The INNOVA 3300 FG has been designed for smoothing high-quality screed and concrete floors as well as special floors. Ergonomically shaped handles and continuously adjustable leading arms guarantee a long period of non-tiring work. The sturdy tubular construction as well as the powerful electric motor guarantee a workflow without interruptions.Impressive advantages: grinding, ablating, roughening and smoothing– one machine can do it all.
For the smoothing of high-quality screed floors BMS INNOVA 3200 F is the suitable option for even better smoothing results. It is equipped with left or right trowel spinning options and continuously adjustable speed
regulation from 0–140 rpm.
BMS INNOVA 3300 FG BMS INNOVA 3200 F
PERFECT SMOOTHING RESULTS
✓ Powerful, maintenance-free gear motor 1,1 kW,
230 Volt, number of revolutions approx. 120 rpm.
✓ 1 blade cross, 4 trowel blades made from special steel
✓ Continuously adjustable leading arms
✓ On demand extension cable permanently connected
✓ Foldable carrying handle
✓ Easy handling enables best trowelling results
✓ Trowel machine – on demand with foldable wheels
✓ Very sturdy and still light weight – 47 kg
POWERFUL PERFORMANCE
BMS INNOVA 3300 FG – Trowel machine for the smoothing of screed and concrete floors
BMS INNOVA 3200 F – for even better smoothing results.
You would like to place an order? Call us!Phone: +49 (0) 5242 9646-0
✓ Powerful, maintenance-free gear motor 1,1 kW, 230 Volt
✓ Adjustable speed regulation 0–140 rpm.
✓ Spinning direction of trowel right or left
✓ Trowel plate fixation including trowel plate made
from special steel
✓ Ergonomically shaped handles guarantee non-tiring work
✓ Continuously adjustable leading arms
✓ On demand extension cable permanently connected
✓ Foldable carrying handle
✓ Easy handling enables best trowelling results
✓ Trowel machine – on demand with foldable wheels
✓ Very sturdy and still light weight – 50 kg
BMS Bau-Maschinen-Service AGDaimlerstraße 10D-33378 Rheda-WiedenbrückTelephone: +49 (0) 5242 9646-0Telefax: +49 (0) 5242 9646-29Mail: [email protected]
www.bmsbaumaschinen.de