+ All Categories
Transcript

MLT Series

Desiccant Dehumidifier

Product Description

The MLT1400 desiccant dehumidifier is designed to effectivelydehumidify high airflow applications using minimal energy. It isequipped with an internally sealed rotor unit. The rotor casing isconstructed of durable thermoset plastic and contains isolatedsections that provide a precise balance for dehumidification,reactivation, and heat recovery airflows. Its rugged formed metalframe and access panels are produced from corrosion resistantALUZINK®.The electrical control system conforms to EN 60204 (IEC204)standards. The electrical components are mounted on busbars andare constructed of halogenfree plastic. The electrical system isdesigned for up to 690V and 60º C. MLT Series dehumidifiersconform to both harmonised European Standards and to CEmarking specifications.

Munters Rotor Technology

The desiccant rotor is manufactured from a corrugated compositematerial that is highly effective at attracting and holding watervapour. Every Munters dehumidifier applies a unique rotortechnology. Airflows, air conditions, rotor sections, and rotorrotation speeds are optimised for specific applications. Aninnovative control system maximises the units energy efficiency. A characteristic of the MLT Series rotor technology is an extrarotor sector which provides high capacity, while simultaneouslyrecovering heat, thereby effectively reducing the electrical powerrequirement

PRODUCT INFORMATION

MLT1400

Features

- Advanced control panel -diagnostic fault display.

- High airflow capacity.

- Minimal energy consumption.

- Unique plastic rotor casing 100 %corrosion resistance.

- Dehumidifies efficient down to-20ºC.

- Interchangeable front and backpanels - easier to install.

Model MLT1400Diagram measurements are for referenceonly.

Scaled and dimensioned AutoCaddrawings are available in MuntersDryCap program.

MLMunters

420

A

B

C

∅D

∅E

Width (A) 715 mm

Depth (B) 590 mm

Height (C) 1410 mm

Diam. (D) 200 mm

Diam. (E) 125 mm

Weight 143 kg

Technical Specification

Process airRated airflow (m³/h) 1400Available static pressure (Pa) 300

Reactivation airRated airflow (m³/h) 254Available static pressure (Pa) 300

Total power,voltage and current (amps/phase)Total power(kW) 8,37220V 3-50Hz (A) 24,3220V 3-60Hz (A) 24,6230V 3-50Hz (A) 24,0230V 3-60Hz (A) 23,9380V 3-50Hz (A) 14,1380V 3-60Hz (A) 14,2400V 3-50Hz (A) 13,8415V 3-50Hz (A) 13,5440V 3-60Hz (A) 12,7460V 3-60Hz (A) 12,4480V 3-60Hz (A) 12,2500V 3-50Hz (A) 10,8

Miscellaneous dataOperating temperature (ºC) -20/+40Max noise level unducted (dBA) 80Air filter standard G3

IEC protective class (unit) IP33IEC protective class (electrical panel) IP54

DehumidificationCapacity

Approximate capacity in kg/h atdifferent inlet process air relativehumidity, % RH.

Dehumidification capacity, kg/h

0

1,6

3,2

4,8

6,4

–10 0 10 20 30

60% RH80% RH

40% RH

8,0

Process Air Temperature, °C

Options

• Hours run counter (monitors thenumber of hours the system isoperational)

• Blocked filter alarm• Rotor stopped alarm• Humidity control system with alarm

and displayRefer to the RH98 product datasheet

• Air cooled condenserRefer to the MLT1400L productdata sheet

• Stainless steel sheet metal casing

DH/MEA/PGB-0025-10/10

Sub

ject

to c

hang

e w

ithou

t not

ice.

AUSTRALIATel +61 2 8843 1588

AUSTRIATel +43 1 6164298-0

BELGIUMTel +32 2 240 68 68

BRAZILTel +55 41 3317 5050

CANADATel +1 905 8585894

CHINATel +86 10 804 18000

DENMARKTel +45 4495 3355

FINLANDTel +358 9 8386 030

FRANCETel +33 1 3411 5757

GERMANYTel +49 40 73416-01

INDIATel +91 20 668 18 900

ITALYTel +39 0183 521377

JAPANTel +81 3 5970 0021

KOREATel +82 2 761 8701

MEXICOTel +1 52 722 270-4029

NETHERLANDSTel +31 172 43 32 31

POLANDTel +48 58 305 35 17

SINGAPORETel +65 6744 6828

SOUTH AFRICATel +27 11 997 2000

SPAINTel +34 91 640 09 02

SWEDENTel +46 8-626 6300

SWITZERLANDTel +41 52 3438886

THAILANDTel +66 2 642 2670-3

TURKEYTel +90 212 286 1838

UNIT. ARAB EMIRATESTel +971 4 881 3026

UNITED KINGDOMTel +44 8708 505 202

UNITED STATESTel +1 978 241 1100

VIETNAMTel +84 8 825 6838 www.munters.com


Top Related