7. H
OIS
TS
& W
INCH
ESHoists.&.winches
Professional tools for handling production, completion and repair
7. HOISTS
& W
INCH
ES7..H
OISTS.
&.W
INCH
ES
Hoists & Winches
7.
Manual.Chain.Hoist..................298
Lever.Hoists..............................303
Tirfor.Wire.Rope.Hoist..—.Manual.................................309
Tirfor.Wire.Rope.Hoist..—.Hydraulic...............................311
MINIFOR.Rope.Hoists............... 313
TIRAK.Wire.Rope.Hoists........... 314
Electric.Chain.Hoists................. 316
Air.Chain.Hoists........................323
See.more.at.www.certex.co.uk/products
7. H
OIS
TS
& W
INCH
ES
Chain Block – Bulldog
Features: • Lightweight.robust.construction..• Super.strength.alloy.loadchain..• Fully.machined.liftwheel..• Minimum.headroom..• Minimum.effort.to.raise.maximum.load..• Cast.steel.safety.latches..• Lower.hook.complete.with.thrust.race..• Fully.enclosed.gear.train..• Weather.protected.automatic.Weston.brake.with.unique.Twin.Pawls..• Galvanised.handchain.as.standard..
Material: Chain.and.Hook.Grade.8Marking:.WLL,.code.and.CE.marking.Safety.Factor:4:1Finish: Durable.baked.enamel.paint.protectionStandard: EN.13157:.2004Loadsafe Overload Protection:.Certex.have.introduced.overload.protection.for.their.quality.range.of.lever.hoists.and.chain.blocks..When.lifting.with.convention-al.blocks.there.is.no.safeguard.incorporated.in.the.design.of.the.chain.block.for.the.prevention.of.overload.damage..Unfortunately.it.is.all.too.common.practice.to.extend.the.leverage.by.adding.either.a.longer.pipe.to.the.lever.hoist.handle.or.using.additional.personnel.to.increase.the.manual.effort.on.the.hand.chain.when.the.lifting.effort.becomes.too.great..The.Bulldog.range.has.a.simple.solution.that.prevents.a.load.being.lifted.if.it.is.excess.of.a.preset.level..Using.a.special.clutch.mechanism,.this.prevents.the.equipment.from.being.damaged.by.overloading..Certex.are.the.pioneers.in.offer-ing.this.feature.as.standard.for.their.range.of.chain.blocks.and.lever.hoists..As.the.additional.cost.to.the.operator.will.be.minimal.this.offers.a.full.proof.safety.system.in.the.prevention.of.damage.to.the.equipment.by.overloading,.thus.avoiding.expensive.repair.costs.
Manual Chain Hoist
0.5,.1,.1.5.&.2.tonne
Chain.Blocks.500kg.to.20.tonnes
CLEARANCE DIMENSIONS(mm)
Product Code
Safe Work-ing Load
Standard lift
Falls of chain
Effort to lift S.W.L.
Net weight
Loadchain diameter
A (Head-room)
B (Width)
C (Depth)
Hook open-ing (upper)
Hook open-ing (lower)
06A0010 0,5 3 m 1 23 kg 10 kg 6 mm 270 127 131 30 3006A0030 1 3 m 1 30 kg 12 kg 6 mm 317 158 140 28 28
1,5 3 m 1 32 kg 13 kg 8 mm 399 187 161 36 3606A0070 2 3 m 1 35 kg 22 kg 8 mm 414 187 161 33.5 33.506A0110 3 3 m 2 32 kg 27 kg 8 mm 465 210 161 40 4006A0130 5 3 m 2 41 kg 46 kg 10 mm 636 253 161 50 5006A0150 10 3 m 4 39 kg 68 kg 10 mm 750 373 184 64 64• N.B. Specifications and dimensions for 20 t available on application.
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..299298 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Manual Chain Hoist Kito CX Series
General:.The.KITO.chain.block.CX.has.a.light-weight.aluminium.housing,.and.is.the.size.of.a.coaster..The.hooks.are.suitable.for.a.larger.intake.and.its.compact.measures.enables.maximum.lifting.height..Flush-mounted.screws.at.the.housing.reduce.the.injury.risk..The.standard.chain.block.is.equipped.with.an.overload.protection.Material:.High.impact.aluminium.housing,.nickel-plated.load.chain.in.grade.10.Marking:.Type.plate.with.WLL,.CE-marking.and.serial.number.Safety factor:.4:1.Finish:.Surface.treated.aluminium.
Code WLL Hand pull to lift full load
Lifting height
Load chain
Chain fall a b C d e g s t Weight
tons in daN m mm mm kg
CX003 0,25 14,7 2,5 3,2 x 9,0 1 88 84 217 53 37 21 32 11 2,4CX005 0,5 18,6 2,5 4,3 x 12,0 1 102 102 260 66 44 24,5 35,5 12 4,5* Weight with standard lift 2,5 m.
Manual Chain Hoist Kito CF Series
General:.The.KITO.chain.block.CF.with.working.loads.up.to.3000.kg.is.a.light.weight.tool..The.double.covered.housing.protects.the.gear.from.dirt.and.water..High.quality.bearings.enable.a.long.term.service..The.precision.gear.is.constructed.to.use.the.block.with.low.exertion.Material:.High.impact.aluminium.housing,.nickel-plated.load.chain.in.grade.10,.steel.hand.chain.Marking:.Type.plate.with.WLL,.CE-marking.and.serial.number.Safety factor:.4:1.Finish:.Surface.treated.aluminium.
Code WLL Lifting height
Chain pull to lift full load
Lift chain Headroom B E G S T Weight
tons m in daN in mm C in mm mm kg*CF005 0,5 3,0 30 5 325 150 51 27 35 12 11CF010 1,0 3,0 36 6,3 370 174 58 29 42 16 13CF015 1,5 3,0 42 7,1 440 203 61 34 47 20 18CF020 2,0 3,0 40 6,3 x 2 510 204 58 36 50 22 21CF030 3,0 3,0 46 7,1 x 2 590 240 61 42 56 27 28*Weight with standard lifting height.
bd
a
g
C
e
st
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..299
7. H
OIS
TS
& W
INCH
ES
Manual Chain Hoist Kito CB Series
General:.The.CB.Series.chain.hoists.have.a.shock.resistant.gear.casing,.double.ratcheted.spring,.precision.gears.and.double.casing.(to.protect.against.dust.and.water),.mechanical.breaks,.load.chain.guide.and.long-life.chain..Reliable,.durable.and.easy.to.use..Capacity.from.500.kg.to.50.t.(special.design.up.to.100.t)..Material:.Nickel.plated.load.chain,.grade.10.Marking:.Type.plate.with.WLL,.CE-marking.and.serial.number.Safety factor:.4:1.Finish:.Painted.
Options:• Plain.trolley• Geared.trolley• Canvas.chain.bucket• Overload.limiter
Code WLL Std. lifting height
Chain pull to lift full load
Lift chain Ø
Chain falls
a b C e f g s t Weight
tons m in daN mm mm kgCB005 0,5 3 23,5 5,0 1 158 161 285 69 99 27 35,5 12,1 10CB010 1,0 3 28,4 6,3 1 162 161 295 71 99 29 42,5 16,0 11,5CB015 1,5 3 34,3 7,1 1 171 182 350 78 112 34 47,5 19,5 14,5CB020 2,0 3 35,3 8,0 1 182 202 375 87 125 36 50,0 21,8 20CB025 2,5 3 32,3 9,0 1 192 233 420 91 143 40 53,0 24,3 27CB030 3,0 3 35,3 7,1 2 171 235 510 78 162 42,5 56,0 27,2 24CB050 5,0 3 33,3 9,0 2 192 282 600 91 194 46,5 63,0 34,5 41CB075 7,5 3,5 34,3 9,0 3 192 373 770 91 253 72,5 85,0 47,5 63CB100 10,0 3,5 35,3 9,0 4 192 438 760 111 308 72,5 85,0 47,5 83CB150 15,0 3,5 36,3 9,0 6 268 492 1020 119 337 80,0 100 60,0 155CB200 20,0 3,5 35,3 x 2 9,0 8 374 746 1180 187 373 81,0 110 67,0 235CB300 30,0 3,5 42,1 x 2 9,0 10 404 746 1300 202 373 103 125 85,0 310CB400 40,0 3,5 42,1 x 2 9,0 14 502 760 1480 251 380 104 140 95,0 480CB500 50,0 3,5 48,0 x 2 9,0 16 544 796 1560 272 398 112 155 106,0 640
ae
t
b
C
g
s
f
Chain Block POWERTEX
• Compact,.lightweight.construction.• Durable.all.steel.construction.with.powder.coated.finish.and.plated.frame.components.• Safe,.well.covered.automatic.load.reaction.brake.• Sealed.ball.bearings.on.the.chain.wheel.maximise.efficiency.and.serviceability.• European.made.COROLIM®.protected.load.chain.• Bottom.hook.with.ball.bearing.• RFID.equipped.(chip).for.easy.service.and.inspection.• QR.code.for.on-site.access.to.Multilanguage.user.manuals.• User.manuals.in.14.languages.included.• Fulfills.the.Machinery.Directive.2006/42/EC.• Comply.fully.with.the.EN.norms.13157.and.818-7.• Testcertifcate.enclosed.
WLL Fall Std. lift Load chain Ø Test load A B C D E H Weight
tons m kg mm kg0,25 1 3,0 4 x 12 375 106 68 108 18 20 280 6,40,5 1 3,0 5 x 15 750 128 75 130 20 22 280 8,91 1 3,0 6,3 x 19,1 1.500 142 76 150 25 26 330 12,02 1 3,0 8 x 24 3.000 175 88 185 33 35 385 19,53 1 3,0 10 x 30 4.500 195 95 226 36 37 435 29,45 2 3,0 9 x 27 7.500 183 90 255 43 43 615 36,310 3 3,0 10 x 30 * 15.000 195 95 355 44 47 810 64,1* G100 chain.Also available with overload protection: Art No + OLP. (Not 250 and 10.000 kg)Without load chain: Art No = last digits 00, instead of 30 and 60.Also available in Black Line: Art No + BK
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..301300 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Model Capacity (WLL) Falls of load chain
Chain dims. Lifting height Closed height Weight@ std HOL
kg mm mtr mm kgYL 500 500 1 5 x 15 3 300 9YL 1000 1000 1 6 x 18 3 335 13YL 2000 2000 1 8 x 24 3 395 20YL 3000 3000 1 10 x 30 3 520 29YL 5000 5000 2 10 x 30 3 654 38YL 10000 10000 3 10 x 30 3 825 71YL 20000 20000 6 10 x 30 3 1300 196
Yalelift 360® MK III ‘Premium’ hand chain hoists
A.hand.chain.hoist.which.opens.up.huge.new.opportunities:.With.our.innovative.design.thingsare.really.beginning.to.move..The.Yalelift.3600.opens.up.a.new.world.of.safety.for.the.operator.The.range.of.applications.as.well.as.the.operating.conditions.have.been.changed.by.arevolutionary.hand.chain.design.
The.key.to.this.innovation.is.our.revolutionary.3600.rotating.hand.chain.guide,.which.allowsoperation.of.the.hand.chain.from.virtually.any.position,.even.in.extremely.confined.areas.The.Yalelift.3600.can.be.operated.at.the.side.of.the.load.or.from.any.other.positionincluding.horizontal.pulling.
You choose:.The.Yalelift.3600.can.be.operated.safely.and.efficiently.from.all.positions,.evenfrom.the.side.of.the.load.
Work from above: The.flexibility.of.the.Yalelift.3600.allows.the.operator.to.work.from.directlyabove.the.load.
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..301
7. H
OIS
TS
& W
INCH
ES
II 2 GD c IIC T4 IIIC T135°C
T135°C Dust Temperature Class: Maximum external surface temperature 135℃
IIC Groups of Dust: Protected for group IIIC which includes groups IIIA & IIIB
T4 Gas Temperature Class: Maximum external surface temperature 135℃
IIC Gas Explosion Group: Protected for group IIC which includes groups IIA & IIB
c Protection type: Design safety
GD Ex Atmosphere: Gas and Dust
2 Category: High Safety
II Equipment Group: Surface industries
Tiger Spark Resistant Chain Block
In.many.areas.of.industry,.plants.are.operated.with.potentially.explosive.atmospheres..Due.to.the.very.high.risk.to.personal.and.other.assets,.extremely.strict.guidelines.and.technical.requirements.are.in.place.in.explosive.zones..Tiger.Spark.Resistant.products.are.manufactured.in.accordance.with.ATEX.Directive.94/9/EC.and.the.Machinery.Direc-tive.2006/42/EC..Our.products.are.lightweight.and.durable.with.a.proven.track.record..Atex.marking:.Ex.II.2.GD.c.IIC.T4.IIIC.T135°C..Suitable.for.gas.and.dust.hazardous.areas:.Zone.1.&.2.(gas).and.Zone.21.&.22.(dust).
Main features:• Suitable.for.use.in.multi-immersion.applications• Available.with.slipping.clutch.overload.protection• Range.from.500kg.–.20000kg• Corrosion.protected.load.and.hand.chain• Marine.specific.friction.discs• Rugged.steel.body.construction,.yet.lightweight.and.portable
Chain Blocks and Lever Hoists (using Tiger SS11 or SS12 units): • Stainless.steel.hand.chain.(chain.blocks)• Corrosion.protected.load.chain• Special.corrosion.protected.body• Marine.specific.friction.discs• Brake.chamber.protection.from.outside.contamination• Copper.plated.suspension.and.load.hooks,.load.chain.guides,.grip.rings,.hand.
wheels.and.end.anchorage.• Stainless.steel.fixings.and.fasteners
Tiger Lifting www.tigerlifting.com
Home of the Tiger hoisting, winching and height safety ranges
06 October 2017 Page 8 of 10
Technical Drawings
0.5t – 2.0t 3.0t single fall
5.0t 10.0t
Ex II 2 GD c IIC T4 IIIC T135°C
Technical Data
Product Code
Capacity (tonne)
Effort (kg)
Dimensions (mm) Load Chain
Standard HOL (m)
Mass @ std HOL
(kg)
Mass for extra
metre HOL (kg)A B C D E F1 F2
Diameter (mm)
No. of falls
SCB-005 0.5 21 93 66 305 52 78 24 38 ø6.3 1 3 10.5 1.9SCB-0100 1.0 25 93 66 340 63 87 28 45 ø6.3 1 3 11.5 1.9SCB-0150 1.5 32 98 73 385 78 102 34 51 ø7.1 1 3 16.0 2.1SCB-0200 2.0 34 101 79 420 87 113 35 53 ø8.0 1 3 20.0 2.4SCB-0300 3.0 38 109 84 550 98 157 36 56 ø10.0 1 3 30.5 3.2SCB-0500 5.0 37 101 79 575 122 209 49 70 ø8.0 3 3 37.5 5.2SCB-1000 10.0 40 109 84 660 153 263 54 87 ø10.0 3 3 64.0 7.5SCB-1500 15.0 41 109 84 840 225 378 59 81 ø10.0 5 3 128.5 11.8SCB-2000 20.0 43 161 90 1050 148 360 81 110 ø110 6 3 178.5 14.2SCB-3000 30.0 42 220 220 1200 388 388 91 135 ø10.0 10 3 307.0 23.8
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..303302 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Lever Hoist Bulldog 250kg
Features:.• Lightweight.compact.design.• Ideal.toolbox.accessory.• Up.to.250kg.capacity.Material: Marking:.WLL,.code.and.CE.marking.Safety factor:.4:1Finish:.Galvanised/.Painted
Lever Hoist Bulldog 500kg
Features:.• Lightweight.compact.design.• Ideal.toolbox.accessory.• Up.to.500kg.capacity.Material: Marking:.WLL,.code.and.CE.marking.Safety factor:.5:1Finish: Baked.powder.coating
Prod
uct C
ode
Cap
acity
(to
nnes
)
Stan
dard
lift
(m)
Run
ning
test
lo
ad (K
N)
Effo
rt re
quire
d to
lif
t loa
d (N
)
Stra
nds
of lo
ad
chai
n
Load
cha
in
diam
eter
(mm
)
Dimensions (mm)
Net
wei
ght (
kg)
Pack
ing
mea
s-ur
emen
t (cm
)
Extr
a w
eigh
t pe
r met
re, e
xtra
ch
ain
(kg)
A B C D H min L K
06B0010 0,25 1 3.2 250 1 4 92 72 85 30 230 160 25 1.8 22 x 7 x 9.5 0.41
Prod
uct C
ode
Cap
acity
(ton
nes)
Stan
dard
lift
(m)
Run
ning
test
load
(K
N)
Effo
rt re
quire
d to
lift
load
(N)
Stra
nds
of lo
ad c
hain
Load
cha
in d
iam
eter
(m
m)
Dimensions (mm)
Net
wei
ght (
kg)
Pack
ing
mea
sure
men
t (c
m)
Extr
a w
eigh
t per
me-
tre,
ext
ra c
hain
(kg)
A B C D H min L K
06B0020 0,5 1.5 6.3 340 1 5 105 78 80 35 260 300 30 1.8 35.5 x 9.5 x 11.5 0.52
Lever Hoists
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..303
7. H
OIS
TS
& W
INCH
ES
Lever Hoist Bulldog 750kg-6t
Features: • Robust.all-steel.construction.• Super.strength.alloy.loadchain.• Minimum.effort.to.raise.maximum.load.• Fully.enclosed.gear.train.• Weather.protected.automatic.Weston.brake.• Fully.machined.liftwheel.• Cast.steel.safety.latches.• Malleable.hook.forgings.• All.gears.and.shafts.running.on.roller.bearings.• Durable.baked.enamel.paint.protection.• Spare.parts.always.available.• Overload.protection.as.standard..
Marking:.WLL,.code.and.CE.marking.Safety.factor:.4:1Finish: Durable.baked.enamel.paint.protectionLoadsafe Overload Protection: Certex.have.introduced.overload.protection.for.their.quality.range.of.lever.hoists.and.chain.blocks..When.lifting.with.conven-tional.blocks.there.is.no.safeguard.incorporated.in.the.design.of.the.chain.block.for.the.prevention.of.overload.damage.Unfortunately.it.is.all.too.common.practise.to.extend.the.leverage.by.adding.either.a.longer.pipe.to.the.lever.hoist.handle.or.using.additional.personnel.to.increase.the.manual.effort.on.the.hand.chain.when.the.lifting.effort.becomes.too.great.The.Bulldog.range.has.a.simple.solution.that.prevents.a.load.being.lifted.if.it.is.excess.of.a.preset.level..Using.a.special.clutch.mechanism,.this.prevents.the.equipment.from.being.damaged.by.overloading.Certex.are.the.pioneers.in.offering.this.feature.as.standard.for.their.range.of.chain.blocks.and.lever.hoists..As.the.additional.cost.to.the.operator.will.be.minimal.this.offers.a.full.proof.safety.system.in.the.prevention.of.damage.to.the.equipment.by.overloading,.thus.avoiding.expensive.repair.costs
Prod
uct C
ode
Safe
Wor
king
Loa
d (t) St
anda
rd L
ift (m
)
Test
Loa
d(K
N)
Hea
droo
m H
(mm
)
Effo
rt o
n le
ave
to li
ft fu
ll lo
ad(k
g)
No.
of l
oad
chai
n fa
lls
Dia
met
er o
f loa
d ch
ain
(mm
)
Leng
th o
f lev
er
hand
le:
(mm
)
Clearance (mm)
Net
Wei
ght(k
g)
A B C E
06B0030 0,75 1.5 m 11.03 325 14 1 6 280 148 90 136 30 7 06B0040 1,5 1.5 m 22.05 380 22 1 8 410 172 98 160 35 11 06B0050 3 1.5 m 37.5 480 32 1 10 410 200 115 180 40 21 06B0060 6 1.5 m 75 620 34 2 10 410 200 115 235 50 31
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..305304 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
LX003
Lever Hoist Kito LX Series
General:.The.LX.Series.is.a.range.of.small.lever.hoists.that.is.suitable.for.opera-tions.in.limited.space..The.lever.hoist.has.a.freewheel.safeguard.and.the.bottom.hook.is.riveted.in.four.places..Its.solid.aluminium.housing.enables.a.low.weight.of.the.hoist..The.load.can.be.lifted.or.lowered.in.2.mm.steps.due.to.its.smooth.gear.mechanism.Material: High.impact.aluminium.housing,.nickel-plated.load.chain.in.grade.10.Marking:.Type.plate.with.WLL,.CE-marking.and.serial.number.Safety factor:.4:1.Finish:.Surface.treated.aluminium.
Code WLL Hand pull to lift full load
Load chain Ø Chain fall a b C D e g s t Weight*
tons daN mm mm kgLX003 0,25 20 3,2 x 9,0 1 90,5 73,5 205 150 62 21,0 32,0 11 1,7LX005 0,5 31 4,3 x 12,0 1 102,0 93,0 246 180 68 24,5 35,5 12 2,7* Weight with standard lift (1,5 m)The last 2 digits in the Art No indicates the lifting height.
ae
D
b
C
ts
g
Lever Hoist POWERTEX
• Compact,.lightweight.construction.• Durable.all.steel.construction.with.powder.coated.finish.and.
plated.frame.components.• Safe,.well.covered.automatic.load.reaction.brake.• European.made.COROLIM®.protected.load.chain.• Bottom.hook.with.ball.bearing.• RFID.equipped.(chip).for.easy.service.and.inspection.• QR.code.for.on-site.access.to.Multilanguage.user.manuals.• User.manuals.in.14.languages.included.• Fulfills.the.Machinery.Directive.2006/42/EC.• Comply.fully.with.the.EN.norms.13157.and.818-7.• Testcertificate.enclosed.
250.kg.500.–.3.000.kg.6.000.kg
WLL Fall Std. lift Load chain Ø Test load A B C D Ø E H min Weight*
tons m kg mm kg0,25 1 1,0 4 x 12 375 100 70 86 158 18 20 280 2,30,5 1 1,5 5 x 15 750 150 90 118 253 20 22 280 5,31 1 1,5 6 x 18 1.500 156 95 138 278 25 26 330 8,11,5 1 1,5 7,1 x 21,2 2.400 186 112 145 378 30 29 385 11,23 1 1,5 10 x 28 4.800 208 120 198 388 36 37 435 20,56 2 1,5 10 x 28 9.450 208 120 230 388 43 43 615 29,59 3 1,5 10 x 28 13.500 508 120 338 388 87 50 690 49,0Also available with overload protection: Art No + OLP. (Not 250 kg)Without load chain: Art No = last digits 00, instead of 30 and 60Also available in Black Line: Art No + BK*Weight for hoist with 1,5 m lift.
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..305
7. H
OIS
TS
& W
INCH
ES
Drawing.of.LB.up.to.3200.kg
Lever Hoist Kito LB Series
General:.The.standard.LB.Lever.Hoist.is.supplied.with.a.freewheel.safeguard.and.the.bottom.hook.is.riveted.in.four.places..The.lever.hoists.are.built.with.premium.grade.components.for.long.life.in.demanding.industrial.applications..Its.double-re-duction.gearing.reduce.size.and.weight.and.requires.minimum.power.to.operate..Sealed.gears.and.brake.are.protected.against.damage.from.dust.and.water..Open.load.sheave.allows.easy.inspection.and.cleaning.without.dismantling.the.unit.Material:.High.impact.steel.housing,.nickel-plated.load.chain.grade.V.(G100).ac-cording.to.EN.818-7.Marking:.WLL,.code.and.CE.marking.Safety factor:.4:1.Finish:.Painted.
Options:• Friction.clutch• Overload.signal• Wire.rope.clip• Shipyard.hook• Without.freewheel.mechanism
Code WLL Hand pull to lift full load
Load chain Ø Lifting height
Chain falls a b C D e g s t Weight*
tons daN mm m mm kgLB008 0,8 28,4 5,6 x 15,7 1,5 1 144 119 280 245 97 23,5 35,5 14,0 5,7LB010 1,0 35,3 5,6 x 15,7 1,5 1 144 119 300 245 97 29,0 42,5 15,0 5,9LB016 1,6 33,3 7,1 x 19,9 1,5 1 159 126 335 265 100 32,0 42,5 19,0 8,0LB025 2,5 36,3 8,8 x 24,6 1,5 1 173 150 375 265 102 36,5 47,0 21,0 11,2LB032 3,2 36,3 10,0 x 28,0 1,5 1 190 159 395 415 112 39,0 50,0 24,5 15,0LB063 6,3 37,2 10,0 x 28,0 1,5 2 190 217 540 415 112 50,0 60,0 34,0 26,0LB090 9,0 38,2 10,0 x 28,0 1,5 3 190 304 680 415 112 72,5 85,0 41,5 40,0*Weight with 1,5 m standard lifting height.The last 2 digits in the Art No indicates the lifting height.
Code WLL Hand pull to lift full load
Lift chain Ø Lifting height
Chain falls a b C D e g s t Weight*
tons daN mm m mm kgLB008 0,8 28,4 5,6 3 1 144 119 280 245 97 23,5 35,5 14,0 5,7LB010 1,0 35,3 5,6 3 1 144 119 300 245 97 29,0 42,5 15,0 5,9LB016 1,6 33,3 7,1 3 1 159 126 335 265 100 32,0 42,5 19,0 8,0LB025 2,5 36,3 8,8 3 1 173 150 375 265 102 36,5 47,0 21,0 11,2LB032 3,2 36,3 10,0 3 1 190 159 395 415 112 39,0 50,0 24,5 15,0LB063 6,3 37,2 10,0 3 2 190 217 540 415 112 50,0 60,0 34,0 26,0LB090 9,0 38,2 10,0 3 3 190 304 680 415 112 72,5 85,0 41,5 40,0*Weight with 1,5 m standard lifting height.The last 2 digits in the Art No indicates the lifting height.
ae
t s
g
C
b
D
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..307306 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
YaleERGO 360 ratchet lever hoist
• 360°.rotation.increases.efficiency,.allowing.operators.to.work.up.to.12.times• faster.than.with.a.conventional.ratchet.lever.hoist.• Requires.30%.less.effort.to.operate.• Easy.and.effective.operation.from.any.angle.with.handle.that.folds.down• and.locks.into.position.on.either.side.of.the.lever.• Design.keeps.the.operator’s.body.aligned.with.the.load.chain,.reducing• the.risk.of.the.twist.effect.–.when.a.hoist.twists.around.the.chain..No.need• to.use.a.second.hand.to.stabilize.the.hoist.• Operator.can.securely.grip.the.grooved,.no-slip.handle.• Crank.handle.made.of.durable.polyamide.with.a.heavy-duty• steel.core.for.rugged.use.
Model kg A min. B C D E F G H J K L M N O P
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm750 320 20 27 18 327 300 40 81 121 56 105 161 30 120 2571500 375 26 31 21 327 300 51 96 147 69 110 179 30 120 2573000 445 37 40 28 377 350 57 123 180 86 121 207 30 120 2996000 563 45 44 35 377 350 87 162 238 86 121 207 30 120 299
Model Capcity (WLL) Falls of load chain
Chain dimensions
lifting height Closedheight
handle effort at WLL
Weight @ std. HOL
kg mm mtr mm DaN £ERGO 750 750 1 5.6 x 17.1 1.5 320 20 6.6ERGO 1500 1500 1 7.1 x 21 1.5 375 26 9.5ERGO 3000 3000 1 10 x 28 1.5 445 40 16.8ERGO 6000 6000 2 10 x 28 1.5 563 42 28.6
Model.YaleERGO.360,.750.–.3000kg,.single.fall
Model.YaleERGO.360,6000kg,.double.fall
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..307
7. H
OIS
TS
& W
INCH
ES
Tiger Subsea Lever Hoist Model No. SS11
• Suitable.for.use.in.multi-immersion.applications• DNV.GL.Verification.tested.according.to.NORSOK.R-002• Available.with.slipping.clutch.overload.protection• Range.from.800kg.–.20000kg• Meets.or.exceeds.all.international.standards
Tiger Lifting Spark Resistant Lever Hoist
Main features:• Available.with.slipping.clutch.overload.protection• Range.from.800kg.–.20000kg• Available.with.forged.clevis.adaptor.components• One.piece.construction.pinion.gear• Lightweight.and.portable• Operating.temperature.of.-.40°C.to.+.50°C• Finished.in.high.quality.powder.coat.paint.offering.excellent.corrosion.protection
Chain Blocks and Lever Hoists (using Tiger SS11 or SS12 units):• Stainless.steel.hand.chain.(chain.blocks)• Corrosion.protected.load.chain• Special.corrosion.protected.body• Marine.specific.friction.discs• Brake.chamber.protection.from.outside.contamination• Copper.plated.suspension.and.load.hooks,.load.chain.guides,.grip.rings,.hand.
wheels.and.end.anchorage• Stainless.steel.fixings.and.fasteners.Lever
Product Code
Capacity Effort Dimensions Load Chain Standard HOL
Mass @ std. HOL
Mass for extra metre HOL
A B C D E F1 F2 Diameter No. of falls
tonne kg mm mm m kg kg
SS-0080 0.8 23 128 243 295 158 99 28 45 6.3 1 3 9.0 0.9SS-0150 1.5 26 154 370 320 172 104 34 51 7.1 1 3 12.5 1.1SS-0300 3.0 38 182 370 400 195 108 36 56 10.0 1 3 22.0 2.2SS-0600 6.0 40 242 370 570 195 108 49 70 10.0 2 3 34.5 4.3SS-1000 10.0 47 379 370 630 195 108 54 87 10.0 3 3 55.0 6.5SS-1500 15.0 44 566 370 840 195 108 59 81 10.0 5 3 128.0 10.8SS-2000 20.0 49 470 370 1050 250 160 81 110 10.0 6 3 174.0 13.1
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..309308 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Pulling and Lifting Hoist, TIRFOR® T
• Legendary.jaw.winch.for.lifting,.pulling.and.tensioning• Can.never.drop.a.load.due.to.twin.jaw.design• Adjustment.in.MM• Built.to.last,.excellent.spares.back.up• Compact,.Lightweight.and.easy.to.handle..• Can.never.drop.a.load.due.to.twin.jaw.design.• Recommended.for.applications.where.portability.is.an.important.criteria..
Part number Model WLL
kg18019 T-508 80018119 T-516 160018129 T-532 3200
Tirfor Wire Rope Hoist — Manual
II 2 GD c IIC T4 IIIC T135°C
T135°C Dust Temperature Class: Maximum external surface temperature 135℃
IIC Groups of Dust: Protected for group IIIC which includes groups IIIA & IIIB
T4 Gas Temperature Class: Maximum external surface temperature 135℃
IIC Gas Explosion Group: Protected for group IIC which includes groups IIA & IIB
c Protection type: Design safety
GD Ex Atmosphere: Gas and Dust
2 Category: High Safety
II Equipment Group: Surface industries
Ex II 2 GD c IIC T4 IIIC T135°C
Technical Data
Product Code
Capacity (tonne)
Effort (kg)
Dimensions (mm) Load Chain
Standard HOL (m)
Mass @ std HOL
(kg)
Mass for extra
metre HOL (kg)A B C D E F1 F2
Diameter (mm)
No. of falls
PLH-0075 0.8 23 128 236 295 158 99 28 45 ø6.3 1 1.5 7.5 0.9PLH-0150 1.5 26 154 360 320 172 104 34 51 ø7.1 1 1.25 10.5 1.1PLH-0300 3.0 38 182 360 400 195 108 36 56 ø10.0 1 1.5 18.0 2.2PLH-0600 6.0 40 242 360 570 195 108 49 70 ø10.0 2 1.5 28.5 4.3PLH-1000 10.0 47 379 360 630 195 108 54 87 ø10.0 3 1.5 46.0 6.5PLH-1500 15.0 44 566 360 840 195 108 59 81 ø10.0 5 1.5 112.0 10.8PLH-2000 20.0 49 470 360 1050 250 160 81 110 ø10.0 6 1.5 156.0 13.1
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..309
7. H
OIS
TS
& W
INCH
ES
Pulling and Lifting Hoist, TIRFOR® TU
• Legendary.jaw.winch.for.lifting,.pulling.and.tensioning• Can.never.drop.a.load.due.to.twin.jaw.design• Adjustment.in.MM• Built.to.last,.excellent.spares.back.up• Compact,.Lightweight.and.easy.to.handle..• Can.never.drop.a.load.due.to.twin.jaw.design.• Recommended.for.applications.where.portability.is.an.important.criteria..
Type.TU
Code WLL Wire rope weight 20m
Dim. of the machine
Handle open/closed
Special TIRFOR wire rope Ø
Wire rope breaking stain
Weight machine
tons kg mm mm mm kg kgTU-8 0,8 6,1 527 x 265 x 108 770 – 510 8,3 4.000 8,4TU-16 1,6 13,1 660 x 330 x 140 1190 – 680 11,5 8.000 18TU-32 3,2 26,6 676 x 330 x 156 1190 – 680 16,3 16.000 27Approved only with original Tirfor® wire rope.
2 2 2 2
2 2
1
1 1
1 1 1 1 1 1 1 1
2
22
1
11
111
1 1
2
21 1
1
1
1
1
1
1
1
1
1 1
1 2 3
1
2
3
1 21 2
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..311310 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Pulling Hoist, hydraulic TIRFOR® TU 32 H
General:.Hydraulic.Tirfor™.machines.are.portable.motorised.hoists.used.with.maxiflex.wire.rope..They.can.be.used.to.lift,.pull.and.position.loads.over.great.distances.de-pending.on.the.wire.rope.length..They.are.suitable.for.use.in.numerous.configurations.and.are.the.ideal.solution.for.use.in.professional.applications;.they.are.operated.by.an.hydraulic.cylinder.powered.by.either.an.electrical.power.pack.or.a.petrol.motor.power.pack.Option:.the.load.capacity.of.the.Tirfor®.system.can.be.increased.by.using.sheave.blocks.
• Low.weight-quick.installation• No.limitation.in.terms.of.wire.rope.length• Easy.to.use,.light-weight,.robust,.powerful,.increased.wear-resistance• Increase.load.capacity.with.sheave.blocks• Overload.protection• Precise.load.positioning.within.millimetres
WLL Ø wire rope Effort to control lever*
Rope travel* Dimensioner mm Weight
daN Forward Reverse Forward Reverse A B C D E F G H I J
kg mm kg kg mm mm kg3.200 16,3 54 25 30 48 28 1.070 680 110 430 28 50 150 205 270 56* Nominal WLL.
E
C
B
A G
J
IH
F
D
2
3
1
4
Pulling Hoist, hydraulic TIRFOR® TU 16 H
General:.Hydraulic.Tirfor™.machines.are.portable.motorised.hoists.used.with.maxiflex.wire.rope..They.can.be.used.to.lift,.pull.and.position.loads.over.great.distances.depending.on.the.wire.rope.length..They.are.suitable.for.use.in.numerous.configurations.and.are.the.ideal.solution.for.use.in.professional.applications;.they.are.operated.by.an.hydraulic.cylinder.powered.by.either.an.electrical.power.pack.or.a.petrol.motor.power.pack.Option:.the.load.capacity.of.the.Tirfor®.system.can.be.increased.by.using.sheave.blocks.
• Low.weight-quick.installation• No.limitation.in.terms.of.wire.rope.length• Easy.to.use,.light-weight,.robust,.powerful,.increased.wear-resistance• Increase.load.capacity.with.sheave.blocks• Overload.protection• Precise.load.positioning.within.millimetres
B
E
G
F
C
D
A
M
KL
J
H
I
1
2
43
WLL Ø wire rope
Effort to control lever*
Rope travel* Dimensions mm Weight
daN Forward Reverse Forward Reverse A B C D E F G H I J K L M
kg mm kg kg mm mm kg1.600 11,5 54 20 56 70 38 36 48 800 646 483 86 400 236 31 78 144 160 30* Nominal WLL.
Tirfor Wire Rope Hoist — Hydraulic
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..311
7. H
OIS
TS
& W
INCH
ES
Maxi Flex Wire Rope
• Legendary.jaw.winch.for.lifting,.pulling.and.tensioning• Can.never.drop.a.load.due.to.twin.jaw.design• Adjustment.in.MM• Built.to.last,.excellent.spares.back.up• Compact,.Lightweight.and.easy.to.handle..• Can.never.drop.a.load.due.to.twin.jaw.design.• Recommended.for.applications.where.portability.is.an.important.criteria..
Minifor TR30 & Tr50
• Compact.hoist.with.quick.removal.of.the.rope.for.easy.handling• Built.in.carry.handle.&.swivel.suspension.hook• Adjustable.upper.and.lower.end.stops• Brake.incorporated.in.motor• Conforms.to.machinery.directive.98/37/EEC,.EN12100-1.and.EN12100-2• Best.in.class.performance.with.excellent.power.to.weight.ratio
8.3mm TU8/T-508 11.5mm TU16/T-516 16.3mm TU32/T-532
Length (m) Code Code Code10 1939 2039 48705015 1949 2049 48709020 1959 2059 48711025 1969 2069 48713030 1979 2079 48714040 1989 2099 48717050 1999 2119 48721060 2009 2139 487220Extra p/m 494500 486000 487000* You must always use a geniune Tractel Maxiflex rope in a Tirfor machine. * Efficiency and safety of the friction grip in the product depends entirely upon the rope being exactly the right diameter and of a construction designed to withstand the immense gripping power of the traction system.
Code Model WLL Speed m/per min Votlage Hoist weight102999 TR30 300kg 5 110 32106009 TR30S 300kg 13 110 32103019 TR50 500kg 7 110 32
Code Model WLL Speed m/per min Votlage Hoist weight58729 TR30 300kg 5 110 3258909 TR50 500kg 13 110 32
Supplied with 3am pendant
Supplied with radio control
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..313312 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Electric Rope Hoist, MINIFORTM
General:.IThe.Minifor™.TR125.SY.hoist.is.equipped.with.a.special.synthetic.rope..It.can.be.used.to.lift.over.great.heights.(standard.rope.length.up.to.200.m,.longer.ropes.upon.request)..The.torque.is.steady.and.speed.is.also.stable.at.30.m/min..The.motor.integrated.brake.makes.it.intrinsically.safe.in.operation..The.Minifor™.TR125.SY.hoist.is.available.with.different.voltages.and.is.suitable.for.various.applications..It.is.operated.through.a.push.button.pendant.control..Options:• Plugin.pendant.control.+.10,.15.or.25.m.extensions.cable.• Radio.remote.control.• Synthetic.rope.with.hook.20.m..Other.lengths.on.request.• Plastic.storage.box.• Combi.Pro.bag.for.rope.storage.• Reeler.for.rope.storage.
..Excl..wire.(maxiflex.wire.rope.to.be.ordered.separately,.please.see.page.246.)
Tension WWL Speed Frequency Nominal current
Dimensions Weight
A B C D E F G H i J K I
kg mm kg400 0,125 30 50 2.25 427 15 140 728 209 100 20 20 324 356 112 15 20690 0,125 30 50 1.3 427 15 140 728 259 158 20 20 324 375 112 15 22230 0,125 30 50 6.2 427 15 140 728 209 100 20 20 324 356 112 15 20230 0,125 15 50 3.9 427 15 140 728 209 100 20 20 324 356 112 15 21115 0,125 15 50/60 9 427 15 140 728 220 100 20 20 324 356 112 15 21* Winch without rope.
MINIFOR Rope Hoists
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..313
7. H
OIS
TS
& W
INCH
ES
Electric Wire Rope Hoist for Material Handling, TIRAKTM
General:.Electric.hoist.for.material.lifting.and.pulling.Proven.technology.in.numerous.applications:The.models.of.our.Tirak™.X-type.traction.hoist.are.lighter.and.can.therefore.ideally.be.used.when.a.low.weight.for.the.application.is.essential..The.X.models.have.only.a.single.drive.disc..The.grip.of.the.wire.rope.on.the.pulley.is.obtained.by.springloaded.pressure.rollers..The.advan-tage.of.the.T.type.models.is.their.ability.to.pull.into.both.directions..The.hoists.of.the.T-series.have.two.clamping.wheels..The.wire.rope.travels.around.the.two.pulleys.along.an.„S“-path.Technical.details.Tirak.X-.and.T-type.hoists.for.material.handling:Our.Tirak.models.are.available.in.following.wire.rope.speed.versions:for.X.300.to.X.1530.(depending.on.model):4,5.m/min,.9.m/min,.18.m/min,.4,5/9.m/min,.4,5/18.m/min,.9/18.m/min.for.X.3050.P:.6.m/min,.12.m/min,.6/12.m/min
• Unlimited.height.of.lift;.the.wire.rope.is.not.stored.in.the.machine.• Compared.to.its.capacity.(up.to.3.000.kg),.the.Tirak.is.very.easy.to.handle.and.extremely.
compact,.and.may.be.simply.moved.from.site.to.site.• Centrifugal.brake.for.controlled.descent.in.case.of.powerfailure.• Pendant.control.with.up/down.and.emergency.stop..• Cable.length.3.m.• They.can.move.loads.to-and-from..
Extremely reliable:.Less.maintenance,.higher.productivity.and.better.efficiency.Compact.design:.Easy.installation.and.incorporation.in.your.specific.application.Light.weight:.This.maximizes.the.usable.workload.for.better.efficiency.Stability:.Constant.lifting.torque.and.speed,.independent.from.lifting.height.Flexibility:.Power.supply.in.your.required.voltage,.or.also.air.powered.possible.
...Excl..wire.(maxiflex.wire.rope.to.be.ordered.separately,.please.see.page.246.)
Type WWL Lifting speed Power Power Rope diameter Weight
tons m/min f/VAC/Hz kW mm kgX300 0,3 9 3/400/50 0,5 8,3 27X301 0,3 9 1/230/50 0,5 8,3 29X302 0,3 18 3/400/50 0,9 8,3 27X400 0,4 9 3/400/50 0,9 8,3 29X401 0,4 9 1/230/50 0,9 8,3 32X402 0,4 18 3/400/50 1,8 8,3 31X403 0,4 9,0/18,0 3/400/50 0,9/1,8 8,3 35X500 0,5 9 3/400/50 0,9 8,3 40X501 0,5 9 3/400/50 1,8 8,3 43X502 0,5 9,0/18,0 3/400/50 0,9/1,8 8,3 47X503 0,5 9 1/230/50 0,9 8,3 49X800 0,8 9 3/400/50 1,6 8,3 45X802 0,8 18 3/400/50 3,2 8,3 49X803 0,8 9,0/18,0 3/400/50 1,75/3,5 8,3 49X805 0,8 4,5/9,0 3/400/50 0,8/1,6 8,3 50X1020 0,98 9 3/400/50 1,9 9,5 45X1023 0,98 9,0/18,0 3/400/50 1,9/3,8 9,5 56X1025 0,98 4,5/9,0 3/400/50 0,9/1,8 9,5 55X1026 0,98 4,5/18,0 3/400/50 0,9/3,8 9,5 71T1020 0,98 9 3/400/50 1,9 9,5 71T1023 0,98 9,0/18 3/400/50 1,9/3,8 9,5 85T1025 0,98 4,5/9 3/400/50 0,9/1,8 9,5 84T1026 0,98 4,5/18 3/400/50 0,9/3,8 9,5 94X1530 1,5 9 3/400/50 2,8 10,2 49X3050 3 6 3/400/50 3,8 14,3 105X3052 3 12 3/400/50 7,5 14,3 117
*The above mentioned TirakTM models have a standard integrated control box and control pendant (Up-Down-Emergency Stop) with a 1,5 m cable.
TIRAK Wire Rope Hoists
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..315314 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Electric Wire Rope Hoist for Man Riding, TIRAKTM
General:.The.performance.standard.for.passenger.transportationAll.hoists.for.man.riding.applications.are.certified.according.to.DIN.EN.1808.and.meet.highest.quality.and.safety.standards.The.Tirak™.traction.hoists.of.our.X-range.are.the.standard.high.performance.lightweight.models.for.all.man.riding.applications..The.X-series.covers.a.wide.range.of.usable.workload.of.up.to.2.000.kg.The.Tirak™.L-models.have.an.even.more.compact.and.lightweight.design,.meet-ing.highest.requirements.on.usable.workload.and.space.restrictions..Small.and.light,.but.still.powerful,.they.can.be.used.for.loads.up.to.500.kg.Both.the.X-.and.the.L-models.use.a.single.disk.driver.system.and.springloaded.pressure.rollers.for.the.grip.of.the.wire.rope.on.the.pulley..Technical.details.Tirak™.X-.and.L-type.hoists.for.man.ridingOur.Tirak™.models.are.available.in.following.wire.rope.speed.versions:.for.X.300.P.to.X.1030.P.(depending.on.model):4,5.m/min,.9.m/min,.18.m/min,.4,5/9.m/min,.4,5/18.m/min,.9/18.m/min.for.X.2050.P:.3.m/min,.6.m/min,.12.m/min,.18.m/min,.3/6.m/min,.3/12.m/min,.6/12.m/min
Capacity.from.300.kg.to.2.ton,.compact.and.versatile• Unlimited.wire.rope.length• Compact,.portable• Can.be.used.horizontal,.in.an.angle.or.vertical• Built-in.mechanical.overload,.in.accordance.with.EN.1808• Can.travel.with.the.load.or.be.mounted.in.a.fixed.position• Standard.equipped.with.an.emergency.descent.system
..Excl..wire.(maxiflex.wire.rope.to.be.ordered.separately,.please.see.page.246.)
Type WWL Lifting speed Power Power Rope diameter Weight
tons m/min f/VAC/Hz kW mm kgX300P 0,3 9 3/400/50 0,5 8,3 28X301P 0,3 9 1/230/50 0,5 8,3 29X302P 0,3 18 3/400/50 0,9 8,3 28X400P 0,4 9 3/400/50 0,9 8,3 29X401P 0,4 9 1/230/50 0,9 8,3 32X402P 0,4 18 3/400/50 1,8 8,3 31X403P 0,4 9,0/18,0 3/400/50 0,9/1,8 8,3 35L500P 0,5 9 3/400/50 0,9 8,3 29X500P 0,5 9 3/400/50 0,9 8,3 41X501P 0,5 9 1/230/50 0,9 8,3 49X502P 0,5 18 3/400/50 1,8 8,3 44X503P 0,5 9,0/18,0 3/400/50 0,9/1,8 8,3 51X820P 0,8 9 3/400/50 1,6 9,5 47X823P 0,8 9,0/18,0 3/400/50 1,75/3,5 9,5 53X1030P 1 9 3/400/50 1,8 10,2 47X1033P 1 9,0/18,0 3/400/50 1,9/3,6 10,2 58X2050P 2 6 3/400/50 2,2 14,3 100X2052P 2 9,0/12,0 3/400/50 5,5 14,3 117X2058P 2 18 3/400/50 7,8 14,3 117
*The above mentioned TirakTM models have a standard integrated control box and control pendant (Up-Down-Emergency Stop) with a 1,5 m cable.
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..315
7. H
OIS
TS
& W
INCH
ES
Electric Chain Hoist Kito ED Series
General:.The.ED.electric.chain.hoist.is.compact,.light-weight,.reliable.and.weather-.and.corrosion-resistant..It.has.an.aluminum.gearbox,.high.performance.mechanical.brake,.adjustable.speed.built-in.potentiometer.and.a.maximal.speed.of.20,1.m/min..The.hook.suspension.type.is.offered.with.single.or.dual.lifting.speed..The.cylinder.control.type.(EDC).is.offered.with.dual.lifting.speed.Marking:.Type.plate.with.WLL,.CE-marking.and.serial.number.Finish:.Nickel.plated.load.chain.grade.80.(DAT).in.accordance.with.EN.818-7.
Options:• Plain.trolley.• Geared.trolley.• Canvas.chain.bucket.up.to.70.m.• Steel.chain.bucket• Radio.remote.control.
Standard:.EN.818-7.
Model.ED.with.single.lifting.speed
Type WLL FEM Lifting speed Duty rating Chain Headroom Weight
tons m/min % ED falls mm kgED06S 0,060 1Am 20.1 30 1 315 11,5ED10S 0,100 1Am 12.5 30 1 315 11,5ED16S 0,160 1Am 19.2 30 1 330 15,5ED18S 0,180 1Am 7.7 20 1 315 11,5ED24S 0,240 1Am 12.9 30 1 330 15,5ED48S 0,480 1Am 6.4 30 2 520 21,0Standard lift 3 m
Model.ED.with.dual.lifting.speed
Type WLL FEM Lifting speed Duty rating Chain Headroom Weight
tons m/min % ED falls mm kgED06ST 0,060 1Am 20.1/4.0 30 1 315 12ED10ST 0,100 1Am 12.5/3.0 30 1 315 12ED16ST 0,160 1Am 19.2/4.0 30 1 330 16ED18ST 0,180 1Am 7.7/3.0 20 1 315 12ED24ST 0,240 1Am 12.9/3.0 30 1 330 16ED48ST 0,480 1Am 6.4/2.0 30 2 520 21Standard lift 3 m
Model.EDC.with.dual.lifting.speed
Type WLL FEM Lifting speed Duty rating Chain Head room Weight
tons m/min % ED falls mm kgEDC06SD 0,060 1Am 20,1/4,0 30 1 945 14,5EDC10SD 0,100 1Am 12,5/3,0 30 1 945 14,5EDC16SD 0,160 1Am 19,2/4,0 30 1 960 18,5EDC18SD 0,180 1Am 7,7/3,0 20 1 945 14,5EDC24SD 0,240 1Am 12,9/3,0 30 1 960 18,5Standard lift 1,8 m
Electric Chain Hoists
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..317316 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Electric Chain Hoist Kito EQ Series
General:.The.EQ.Electric.Chain.Hoist.is.a.small.and.powerful.chain.hoist.with.hanging.suspension,.aluminium.die-cast.body,.heavy.duty.fan-cooled.motor.and.a.plastic.chain.container..It.lifts.up.to.1.tons.
Standard configuration:• Frequency.inverter.• 380.460.V/3.phase.• Overload.protection.via.frequency.inverter• Counter.hour.meter• Upper.lower.limit.switch• Pull-rotor.motor.brake• Nickel.plated.load.chain.class.grade.80.(DAT).in.accordance.with.Norm.EN.818-7• Plastic.chain.container• Ergonomic.push.button.control• Control.voltage.24.V.DC• Aluminium.die-cast.body.small,.light,.rugged• High.duty.rating.FEM.3.m/ISO.M6.rating.through.500.kg.
Options:• Plain.and.gear.trolley• Motorized.trolley.(inverter.controlled.dual.speed)
Technical.data
Code Cap. Std. lift
Traversing motor Lifting speed m/min. Load chain dia.
Chain fall
Class Head room
Entire length
Weight
tons m Output kW
Rating% ED
High (light load) 0-30 %
WLL
High 30-100 %
WLL
mm m mm mm kg
EQ001IS 0,125 3 0,5 40 / 20 22,1 17,0 5,6x15,7 1 3 395 417 30EQ003IS 0,25 6 0,5 40 / 20 13,0 10,0 5,6x15,7 1 3 395 417 30EQ005IS 0,5 6 0,75 40 / 20 9,9 7,6 5,6x15,7 1 3 410 417 32EQ010IS 1 6 1,5 40 / 20 9,2 7,1 7,1x19,1 1 2 465 433 42
Technical.data.EQ.with.motorized.trolley
Type Traversing motor Traversing speed* (m/min) Flange width B (mm) Min. radius curve
Output (kW) Rating (%ED) 50Hz High 50Hz Low Standard Option (mm)EQM1001IS-IS 0,4 27/13 Standard 24 4 58 to 163 164 to 305 800EQM1003IS-IS 0,4 27/13 Standard 24 4 58 to 163 164 to 305 800EQM1005IS-IS 0,4 27/13 Standard 24 4 58 to 163 164 to 305 800EQM1010IS-IS 0,4 27/13 Standard 24 4 58 to 163 164 to 305 800* Adjustable traversing speed 24/2,4
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..317
7. H
OIS
TS
& W
INCH
ES
Electric Chain Hoist Kito ER2 Single Speed Series
Electric chain hoist with hook suspensionGeneral:.The.ER2.Electric.Chain.Hoists.are.durable,.safe.and.easy.to.use.hoists..It.has.a.top.hook.or.overhead.mounting.suspension,.aluminium.die-cast.body,.electromagnetic.brake.and.a.canvas.chain.container..It.lifts.from.125.kg.up.to.5.tons.
Standard configuration:• 400.V/50.Hz• Contactor.control.for.single.speed• CH-Meter:.operating.hours./number.of.starts• Ergonomic.push.button.control• Upper-lower.limit.switch• Nickel-plated.load.chain.class.grade.80.(DAT).in.accordance.with.Norm.EN.818-7• Thermal.protector• Carbon.friction.clutch>.400.V/50.Hz
Options:• 500.V/Contactor.control• 230.V/50.Hz/60.Hz,.3.phase• Rubber.bumpers.for.motorized.trolleys• Additional.mechanical.brake• Electrical.overload.limiter• Acoustic.overload.signal• Radio.remote.control• Variable.speed.control• Level.limit.switch• Steel.chain.container• Trolley.versions:.motorized,.geared.and.plain
Technical.specifications
WLL Product Lifting motor Lifting speed* (m/min) Load chain Class Test load Net weight Additional weight per 1 m lift
tons code Output (kW) Rating(%ED) 50Hz (mm) x falls ISO/FEM kg kg kg0,125 ER2-001H 0,56 60 14,1 4,3 x 1 M5/2m 156 27 0,420,25 ER2-003S 0,56 60 9,1 4,3 x 1 M5/2m 313 27 0,420,25 ER2-003H 0,56 60 13,4 6,0 x 1 M5/2m 313 37 0,810,5 ER2-005L 0,9 60 3,8 6,0 x 1 M5/2m 625 33 0,810,5 ER2-005S 0,56 60 7,3 6,0 x 1 M5/2m 625 37 0,811 ER2-010L 0,9 60 3,5 7,7 x 1 M5/2m 1250 47 1,331 ER2-010S 0,9 60 7,1 7,7 x 1 M5/2m 1250 54 1,331,6 ER2-016S 1,8 60 4,5 10,2 x 1 M5/2m 2000 72 2,32 ER2-020L 1,8 60 3,7 10,2 x 1 M4/1Am 2500 73 2,32 ER2-020S 3,5 60 7,0 10,2 x 1 M4/1Am 3130 91 2,32,5 ER2-025S 3,5 60 5,7 11,2 x 1 M4/1Am 4000 104 2,83,2 ER2-032S 3,5 60 4,4 10,2 x 2 M4/1Am 6250 107 4,75 ER2-050S 3,5 60 2,9 11,2 x 2 M4/1Am 132 5,6
b
f
h i
a
d e
D
L
g
C
Lift
WLL Product Min. headroom C D a b d e f g h i
tons code mm mm mm mm mm mm mm mm mm mm0,125 ER2-001H 350 430 478 321 219 259 260 27 99 930,250 ER2-003S 350 430 478 321 219 259 260 27 99 930,250 ER2-003H 370 490 510 348 242 268 283 27 113 1060,500 ER2-005L 370 490 513 348 242 271 283 27 113 1060,500 ER2-005S 370 490 510 348 242 268 283 27 113 1061 ER2-010L 430 550 589 376 291 298 335 31 129 1181 ER2-010S 430 550 598 376 291 307 335 31 129 1181,6 ER2-016S 510 630 646 427 308 338 384,5 34 160,5 137,52 ER2-020L 575 630 646 427 308 338 384,5 39 160,5 137,52 ER2-020S 590 630 703 427 347 356 384,5 39 160,5 137,52,5 ER2-025S 625 840 736 445 337 399 437,5 39 173,5 142,53,2 ER2-032S 785 920 703 427 347 356 397 44 216 825 ER2-050S 850 920 736 445 337 399 439 47 231,5 84,5
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..319318 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Electric Chain Hoist Kito ER2 Dual Speed Series
Electric chain hoist with hook suspensionGeneral:.The.ER2.Electric.Chain.Hoists.are.durable,.safe.and.easy.to.use.hoists..It.has.a.top.hook.or.overhead.mounting.suspension,.aluminium.die-cast.body,.electromagnetic.brake.and.a.canvas.chain.container..It.lifts.from.125.kg.up.to.5.tons.
Standard configuration:• 400.V/50.Hz• Frequency.inverter.for.2.lifting.speeds• CH-Meter:.operating.hours/number.of.starts• Ergonomic.push.button.control• Upper-lower.limit.switch• Nickel-plated.load.chain.class.grade.80.(DAT).in.accordance.with.Norm.EN.818-7• Thermal.protector• Carbon.friction.clutch>.400.V/50.Hz
Options:• 500.V/Contactor.control• 230.V/50.Hz/60.Hz,.3.phase• Rubber.bumpers.for.motorized.trolleys• Additional.mechanical.brake• Electrical.overload.limiter• Acoustic.overload.signal• Radio.remote.control• Variable.speed.control• Level.limit.switch• Steel.chain.container• Trolley.versions:.motorized,.geared.and.plain
b
f
h i
a
d e
D
L
g
C
Lift
Technical.specifications
WLL Product Lifting motor Lifting speed* (m/min) Load chain
Class Test load
Net weight
Additional weight pr. 1 m lift
tons code Output (kW)
Rating (%ED)
50Hz high
50Hz low
(mm) x falls
ISO/FEM kg kg kg
0,125 ER2-001IH 0,56 40/20 PresetAdjustable 16,6 2,81,4 4,3 x 1 M6/3m 156 27 0,420,25 ER2-003IS 0,56 40/20 PresetAdjustable 10,8 1,80,9 4,3 x 1 M6/3m 313 27 0,420,25 ER2-003IH 0,9 40/20 PresetAdjustable 15,7 2,61,3 6,0 x 1 M6/3m 313 36 0,810,5 ER2-005IL 0,56 40/20 PresetAdjustable 4,5 0,80,4 6,0 x 1 M6/3m 625 32 0,810,5 ER2-005IS 0,9 40/20 PresetAdjustable 8,5 1,40,7 6,0 x 1 M6/3m 625 36 0,811 ER2-010IL 0,9 40/20 PresetAdjustable 4,2 0,70,3 7,7 x 1 M5/2m 1250 45 1,331 ER2-010IS 1,8 40/20 PresetAdjustable 8,2 1,40,7 7,7 x 1 M5/2m 1250 52 1,33* Note: The high speed is present to the maximum speed at the KITO factory in Japan. The low speed can be increased or respectively reduced.
WLL Product Lifting motor Lifting speed* (m/min) Load chain
Class Test load
Net weight
Additional weight pr. 1
m lift
tons code Output (kW)
Rating (%ED)
50Hz high
50Hz low
(mm) x falls
ISO/FEM kg kg kg
1,6 ER2-016IS 1,8 40/20 PresetAdjustable 5,3 0,90,4 10,2 x 1 M5/2m 2000 72 2,32 ER2-020IL 1,8 40/20 PresetAdjustable 4,3 0,70,4 10,2 x 1 M4/1Am 2500 73 2,32 ER2-020IS 3,5 40/20 PresetAdjustable 8,2 1,40,7 10,2 x 1 M4/1Am 2500 89 2,32,5 ER2-025IS 3,5 40/20 PresetAdjustable 6,6 1,10,6 11,2 x 1 M4/1Am 3130 100 2,83,2 ER2-032IS 3,5 40/20 PresetAdjustable 5,2 0,90,4 10,2 x 2 M4/1Am 4000 105 4,75 ER2-050IS 3,5 40/20 PresetAdjustable 3,3 0,60,3 11,2 x 2 M4/1Am 6250 128 5,6* Note: The high speed is present to the maximum speed at the KITO factory in Japan. The low speed can be increased or respectively reduced.
Table.continues
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..319
7. H
OIS
TS
& W
INCH
ES
WLL Product Min. headroom C D a b d e f g h i
tons code mm mm mm mm mm mm mm mm mm mm0,125 ER2-001IH 350 430 535 345 276 259 284 27 99 1170,250 ER2-003IS 350 430 535 345 276 259 284 27 99 1170,250 ER2-003IH 370 490 568 348 300 268 283 27 113 1060,5 ER2-005IL 370 490 571 348 300 271 283 27 113 1060,5 ER2-005IS 370 490 568 348 300 268 283 27 113 1061 ER2-010IL 430 550 614 376 316 298 335 31 129 1181 ER2-010IS 430 550 623 376 316 307 335 31 129 1181,6 ER2-016IS 510 630 710 427 372 338 384,5 34 160,5 137,52 ER2-020IL 575 630 710 427 372 338 384,5 39 160,5 137,52 ER2-020IS 590 630 767 427 411 356 384,5 39 160,5 137,52,5 ER2-025IS 625 840 800 445 401 399 437,5 39 173,5 142,53,2 ER2-032IS 785 920 767 427 411 356 397 44 216 825 ER2-050IS 850 920 800 445 401 399 439 47 231,5 84,5
Electric Chain Hoist Kito ER2 Large Capacity Single Speed SeriesElectric chain hoist with hook suspensionGeneral:.The.ER2.Electric.Chain.Hoists.are.durable,.safe.and.easy.to.use.hoists..It.has.a.top.hook.or.overhead.mounting.suspension,.aluminium.die-cast.body,.electromagnetic.brake.and.a.canvas.chain.container...It.lifts.from.10.tons.up.to.20.tons.
Standard configuration:• 400.V/50.Hz• Contactor.control.for.single.speed• CH-Meter:.operating.hours/number.of.starts• Ergonomic.push.button.control• Upper-lower.limit.switch• Nickel-plated.load.chain.class.grade.80.(DAT).in.accordance.with.Norm.EN.818-7• Thermal.protector• Carbon.friction.clutch>.400.V/50.Hz
Options:• 500.V/Contactor.control• 230.V/50.Hz/60.Hz,.3.phase• Rubber.bumpers.for.motorized.trolleys• Additional.mechanical.brake• Electrical.overload.limiter• Acoustic.overload.signal• Radio.remote.control• Variable.speed.control• Level.limit.switch• Steel.chain.container• Trolley.versions:.motorized,.geared.and.plain
Single.Speed./.Technical.specifications
WLL Product Lifting motor Lifting speed* (m/min)
Load chain Class Test load Net weight Additional weight per 1 m lift
tons code Output (kW) Rating (%ED) 50Hz (mm) x falls ISO/FEM tons kg kg10 ER2-100S 3,5x2 60 2,9 11,2 x 4 M4/1Am 12,5 303 11,015 ER2-150S 3,5x2 60 1,9 11,2 x 6 M4/1Am 18,8 404 17,020 ER2-200S 3,5x2 60 1,4 11,2 x 8 M4/1Am 25,0 476 22,0
wb aa
L
g
CD
Lift
WLL Product Min. headroom C D a b w g
tons code mm mm mm mm mm mm10 ER2-100S 1370 1210 798 849 956 8015 ER2-150S 1595 1520 798 1022 1129 8620 ER2-200S 1710 1600 798 1198 1305 102
Table.continued
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..321320 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Electric Chain Hoist Kito ER2 Large Capacity Dual Speed SeriesElectric chain hoist with hook suspensionGeneral:.The.ER2.Electric.Chain.Hoists.are.durable,.safe.and.easy.to.use.hoists..It.has.a.top.hook.or.overhead.mounting.suspension,.aluminium.die-cast.body,.electromagnetic.brake.and.a.canvas.chain.container..It.lifts.from.10.tons.up.to.20.tons.
Standard configuration:• 400.V/50.Hz• Frequency.inverter.for.2.lifting.speeds• CH-Meter:.operating.hours/number.of.starts• Ergonomic.push.button.control• Upper-lower.limit.switch• Nickel-plated.load.chain.class.grade.80.(DAT).in.accordance.with.Norm.EN.818-7• Thermal.protector• Carbon.friction.clutch>.400.V/50.Hz
Options:• 500.V/Contactor.control• 230.V/50.Hz/60.Hz,.3.phase• Rubber.bumpers.for.motorized.trolleys• Additional.mechanical.brake• Electrical.overload.limiter• Acoustic.overload.signal• Radio.remote.control• Variable.speed.control• Level.limit.switch• Steel.chain.container• Trolley.versions:.motorized,.geared.and.plain
Dual.Speed./.Technical.specifications
WLL Product Lifting motor Lifting speed*(m/min) Load chain
Class Test load
Net weight
Additional weight per 1 m lift
tons code Output (kW)
Rating (%ED)
50Hz high
50Hz low
(mm) x falls
ISO/FEM tons kg kg
10 ER2-100IS 3,5x2 40/20 PresetAdjustable 3,3 0,60,3 11,2 x 4 M4/1Am 12,5 303 11,015 ER2-150IS 3,5x2 40/20 PresetAdjustable 2,2 0,40,2 11,2 x 6 M4/1Am 18,8 404 17,020 ER2-200IS 3,5x2 40/20 PresetAdjustable 1,7 0,30,2 11,2 x 8 M4/1Am 25,0 476 22,0* Note: The high speed is present to the maximum speed at the KITO factory in Japan. The low speed can be increased or respectively reduced.
WLL Product Min. headroom C D a b w g
tons code mm mm mm mm mm mm10 ER2-100IS 1370 1210 798 849 956 8015 ER2-150IS 1595 1520 798 1022 1129 8620 ER2-200IS 1710 1600 798 1198 1305 102
wb aa
L
g
CD
Lift
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..321
7. H
OIS
TS
& W
INCH
ES
CM Lodestar Electric Chain Hoists
Capacities:.250.–.3000kgThe.Lodestar.hoist.is.a.tough.and.durable.electric.chain.hoist,.designed.to.keep.working.in.the.most.arduous.applications..This.hoist.is.recognised.and.proven.within.the.hire.industry.as.the.number.one.hoist,.where.high.duty,.combined.with.long.heights.of.lift.are.required.From.hook.suspension.in.the.rental.industry.to.trolley.mounted.in.a.factory.production.line,.the.Lodestar.has.a.proven.reputation.as.the.solution.for.industrial.strength.lifting..
• Tough.lightweight.aluminium.alloy.covers.totally.enclose.the.mechanical.and.electrical.components.providing.protection.and.efficient.heat.dissipation..The.design.enables.easy.access.for.installation.and.service
• Adjustable.upper.and.lower.limit.switches• 48v.control,.IP65.pendant.as.standard.(Hoist.is.IP54).• Thermal.overload.protection.as.standard• FEM.classification.2m.(50%.duty.-.30.minutes.continuous.use.per.hour)• Ideal.for.long.heights.of.lifts
Model Operating voltage Capacity (WLL) Falls of load chain
Lifting speed(s)m/min
Load chain depth x pitch
Hoist motor
kg m/min mm kWC 230v or 110v 1ph 50Hz 250 1 8 6.3 x 18.9 0.37F 230v or 110v 1ph 50Hz 500 1 4 6.3 x 18.9 0.37J 230v or 110v 1ph 50Hz 500 1 8 7.9 x 21.7 0.75L 230v or 110v 1ph 50Hz 1000 1 4 7.9 x 21.7 0.75LL 400v 3ph 50Hz 1000 1 8 7.9 x 21.7 0.75LL2 400v 3ph 50Hz 1000 1 8/2.5 7.9 x 21.7 0.75R 230v or 110v 1ph 50Hz 2000 2 2 7.9 x 21.7 0.75RR 400v 3ph 50Hz 2000 2 4 7.9 x 21.7 0.75RR2 400v 3ph 50Hz 2000 2 4/1.3 7.9 x 21.7 0.75RT 230v or 110v 1ph 50Hz 3000 3 1.33 7.9 x 21.7 0.75
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..323322 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Lifting Speed Lifting Capacity
Lifting SpeedRated Load
Lowering SpeedRated Load
Hook MountHead-room
Trolley MountHeadroom
Shipping WeightTop Hook
Model Metric tons #Falls mm m/min mm mm kg Page no.
CLK SERIESCL125K 0.125 1 13.1 11.3 292.1 358.1 15.4 6CL250K 0.25 1 9.8 13.7 292.1 358.1 15.4 6CL500K 0.50 2 4.6 6.7 323.9 389.9 17.2 6MLK SERIES AND HLK SERIESML250K 0.25 1 30.8 35.7 457.2 457.2 21.8 10ML250KS 0.25 1 12.2 27.4 457.2 457.2 21.8 10ML250KR 0.25 1 7.9 11.6 457.2 457.2 21.8 10ML500K 0.5 1 16.8 29.6 457.2 457.2 21.8 10ML500KS 0.5 1 6.7 20.1 457.2 457.2 21.8 10
ML500KR 0.5 2 4 6.1 457.2 457.2 27.7 10ML1000K 1 2 8.5 14.9 457.2 457.2 27.7 10ML1000KS 1 2 3.4 10.1 457.2 457.2 27.7 10HL1000K 1 1 7.9 11.3 469.9 460.5 38.1 10HL1000KR 1 1 7.9 11.3 469.9 460.5 38.1 10HL1500K 1.5 1 4.9 7.9 477.5 479.5 38.1 10HL2000K 2 2 4 5.5 584.2 549.4 56.7 10HL3000K 3 2 2.4 4 635 574.8 56.7 10HL4500K 4.5 3 1.4 3.1 784.4 711.2 87.5 10HL6000K 6 4 1.1 2.3 919.2 817.6 112.5 10ARO SERIES7770E 0.125 1 33.5 83.8 432 428 18.6 197718E 0.25 1 25 68.3 432 428 18.6 197756E 0.5 1 12.5 34.1 432 428 18.6 197776E 1 2 6.4 17.1 551 521 24 197790A 1 1 7.9 13.4 479 381 28.1 197792A 2 2 3.7 7.3 568 457 36.7 197712EL 0.25 1 15.2 21.3 432 435 18.6 197714EL 0.68 2 4.9 4.9 432 435 18.6 197796AL 0.68 1 4.9 4.9 479 381 28.1 197798AL 1.1 2 3.7 3.7 568 457 36.7 197799AL 1.36 2 2.1 2.1 568 457 36.7 19All Ingersoll Rand Series hoists meet or exceed ASME/ANSI B30.16 standards. Please consult factory for hoists that meet the European machinery directive (EC) and carry the CE mark.
Air chain hoists selection guide
Air Chain Hoists
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..323
7. H
OIS
TS
& W
INCH
ES
CLK Series
General:.Designed.to.work.in.difficult.environments,.Infinity.FA7i.winches.feature.a.high.power.radial.piston.air.motor.and.the.capacity.to.move.up.to.7,000.kg.(15,4000.lbs)..Their.rugged.design.makes.them.ready.to.take.on.your.most.challenging.applications.Standards:.Liftstar®.and.Pullstar®.winches.meet.the.U.S..standard.ASME/ANSI.B30.7.and.addtionally.meet.the.European.standards.FEM.9.511.and.FEM.1001.for.lifitng..The.FEM.9.511.establishes.a.durability.rating.which.is.1Bm.Sizes:.2,250.–.7,500.kg.(4,950.–.16,530.kg)
Model Capacity Hook Mount
Headroom
Trolley Mount
Headroom
Lifting Speed Lowering Speed Chain Weight
(per foot of lift)
NetWeight
#Falls min Rated Load
No Load Rated Load
No Load Chain
kg mm kg kg (lb)CL125K 125 1 292.1 358.1 13.1 17.1 11.3 8.2 4x12 0.11 15.4CL250K 250 1 292.1 358.1 9.8 17.1 13.7 8.2 4x12 0.11 15.4CL500K 500 2 323.9 389.9 4.6 7.9 6.7 4.0 4x12 0.22 17.2
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..325324 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
MLK and HLK Series
General:.Designed.to.work.in.difficult.environments,.Infinity.FA7i.winches.feature.a.high.power.radial.piston.air.motor.and.the.capacity.to.move.up.to.7,000.kg.(15,4000.lbs)..Their.rugged.design.makes.them.ready.to.take.on.your.most.challenging.applications.Standards:.Liftstar®.and.Pullstar®.winches.meet.the.U.S..standard.ASME/ANSI.B30.7.and.addtionally.meet.the.European.standards.FEM.9.511.and.FEM.1001.for.lifitng..The.FEM.9.511.establishes.a.durability.rating.which.is.1Bm.Sizes:.2,250.–.7,500.kg.(4,950.–.16,530.kg)
Model Capacity Hook Mount
Headroom
Trolley Mount
Headroom
Lifting Speed Lowering Speed Chain Weight
(per foot of lift)
NetWeight
metric #Falls Rated Load min
No Loadmin
Rated Load min
No Load-min
ChainSize
tons mm mm kg kgML250K 0.25 1 457.2 457.2 30.8 52.1 35.7 30.2 6.4x19.5 0.3 21.8ML250KS 0.25 1 457.2 457.2 12.2 21.6 27.4 16.2 6.4x19.5 0.3 21.8ML250KR 0.25 1 457.2 457.2 7.9 12.8 11.6 9.1 6.4x19.5 0.3 21.8ML500K 0.50 1 457.2 457.2 16.8 32.3 29.6 18 6.4x19.5 0.3 21.8ML500KS 0.50 1 457.2 457.2 6.7 13.4 20.1 9.8 6.4x19.5 0.3 21.8ML500KR 0.50 2 457.2 457.2 4 6.4 6.1 4.6 6.4x19.5 0.5 27.7ML1000K 1 2 457.2 457.2 8.5 16.2 14.9 9.1 6.4x19.5 0.5 27.7ML1000KS 1 2 457.2 457.2 3.4 6.7 10.1 4.9 6.4x19.5 0.5 27.7HL1000K 1 1 469.9 459.7 7.9 12.2 11.3 7.9 9.5x25.7 0.6 38.1HL1000KR 1 1 469.9 459.7 7.9 12.2 11.3 7.9 9.5x25.7 0.6 38.1HL1500K 1.50 1 477.5 480.1 4.9 8.5 7.9 4.9 9.5x25.7 0.6 38.1HL2000K 2 2 584.2 548.6 4 6.1 5.5 4 9.5x25.7 1.2 56.7HL3000K 3 2 635 574 2.4 4.3 4 2.4 9.5x25.7 1.2 56.7HL4500K 4.50 3 784.9 711.2 1.4 3.2 3.1 2 9.5x25.7 1.8 87.5HL6000K 6 4 919.5 817.9 1.1 2.6 2.3 1.5 9.5x25.7 2.4 112.5
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..325
7. H
OIS
TS
& W
INCH
ES
Trolley Mount posible
Model Capacity MinimumHeadroom
Trolley Speed at
Rated Load
Air Con-sumption @Rated Load
Trolley FlangeAdjustment
Minimum CurveRadius
Air Inlet NetWeight
Trolleytype
metric tons
mm mm No Loadmin
mm ChainSize
kg
ML250K, KS, KR Plain 0.25 457 - - 68-305 1.1 - 31Geared 0.25 457 - - 68-305 1.1 - 32Motor 0.25 457 29 1 68-305 1.1 1/4 35
ML500K, KS, KR Plain 0.50 457 - - 68-305 1.1 - 31Geared 0.50 457 - - 68-305 1.1 - 32Motor 0.50 457 29 1 68-305 1.1 1/4 35
ML1000K, KS Plain 1 432 - - 68-305 1.1 - 37Geared 1 432 - - 68-305 1.1 - 38Motor 1 432 28 1 68-305 1.1 1/4 41
HL1000K, KR Plain 1 457 - - 83-304 1.1 - 48Geared 1 457 - - 83-304 1.1 - 50Motor 1 457 28 1 83-304 1.1 1/4 53
HL1500K Plain 1.50 457 - - 83-304 1.1 - 48Geared 1.50 457 - - 83-304 1.1 - 50Motor 1.50 457 25 1 83-304 1.1 1/4 53
HL2000K Plain 2 559 - - 83-304 1.1 - 92Geared 2 559 - - 83-304 1.1 - 94Motor 2 559 24 1 83-304 1.1 1/4 97
HL3000K Plain 3 584 - - 83-304 1.1 - 92Geared 3 584 - - 83-304 1.1 - 94Motor 3 584 22 1 83-304 1.1 1/4 97
HL4500K Plain 4.50 686 - - 108-184 1.5 - 178Geared 4.50 686 - - 108-184 1.5 - 180Motor 4.50 686 18 1 108-184 1.5 1/4 182
HL6000K Plain 6 737 - - 108-184 1.5 - 201Geared 6 737 - - 108-184 1.5 - 202Motor 6 737 14 1 108-184 1.5 1/4 205
Working pressure from 5 to 7 bar
Liftchain Air Hoists
General:.Ingersoll.Rand.Liftchain.Hoists.are.the.most.advanced.heavy-lifting.hoists.in.the.Ingersoll.Rand.hoist.line..They.incorporate.all.the.best.features.we’ve.developed.from.our.decades.of.experience.into.a.compact,.modular.frame..Hook.Mount.versions.offer.maximum.versatility.to.place.them.where.youneed.them..Count.on.Liftchain.hook.mount.hoists.to.get.the.job.done.Standards:.Liftstar®.and.Pullstar®.winches.meet.the.U.S..standard.ASME/ANSI.B30.7.and.addtionally.meet.the.European.standards.FEM.9.511.and.FEM.1001.for.lifitng..The.FEM.9.511.establishes.a.durability.rating.which.is.1Bm.Sizes:.1.5-100.tons
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..327326 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
Liftchain hydraulic Hoists
General:.Ingersoll.Rand.Liftchain.Hoists.are.the.most.advanced.heavy-lifting.hoists.in.the.Ingersoll.Rand.hoist.line..They.incorporate.all.the.best.features.we’ve.developed.from.our.decades.of.experience.into.a.compact,.modular.frame..Hook.Mount.versions.offer.maximum.versatility.to.place.them.where.you.need.them..Count.on.Liftchain.hook.mount.hoists.to.get.the.job.done.Standards:.Liftstar®.and.Pullstar®.winches.meet.the.U.S..standard.ASME/ANSI.B30.7.and.addtionally.meet.the.European.standards.FEM.9.511.and.FEM.1001.for.lifitng..The.FEM.9.511.establishes.a.durability.rating.which.is.1Bm.Sizes:.1.5-100.tons
Liftchain Suspension Options
General:.Ingersoll.Rand.Liftchain.Hoists.are.available.with.4.different.suspensions.and.include.plain,.geared.or.motororized.trolley.options.for.maximum.flexibility..With.a.modular.design.and.compact.frame,.there.is.an.Ingersoll.Rand.Liftchain.hoist.to.help.you.get.your.job.done.Standards:.Liftstar®.and.Pullstar®.winches.meet.the.U.S..standard.ASME/ANSI.B30.7.and.addtionally.meet.the.European.standards.FEM.9.511.and.FEM.1001.for.lifitng..The.FEM.9.511.establishes.a.durability.rating.which.is.1Bm.Sizes:.1.5-100.tons
Liftchain.Suspension.Options
Low.Headroom.Trolley
Ultra-Low.Headroom.Trolley
Standard.Trolley.Mounted
Hercu-Link® Air BOP Handling System
General:.Ingersoll.Rand’s.tried.and.true.Hercu-Link®.BOP.(Blowout.Pre-venter).Handling.Systems.provide.precise.control.for.your.BOP.stack..The.robust,.all.steel.design.thrives.in.severe.environments.and.is.available.in.low.and.ultra-low.headroom.models.to.fit.your.rig’s.needs.Sizes:.50-200.tons
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..327
7. H
OIS
TS
& W
INCH
ES
AIR HOIST TCR-1000 | TCR-2000/2
Standard features• Toku.rotary.vane.motor• .ATEX.zone.2.specification• .Robust.epicycle.gearbox• .Failsafe.automatic.internal.disc.brake• .Mechanical.upper.&.lower.switches• .Cast.steel.housing• .Internal.silencing.down.to.83.dB(A)• .Alloy.safety.swivel.hooks.with.safety.catch• .Load.chain.7.x.21mm.of.European.manufacture.o.EN818-7• .Automatic.load.limiter
Available options• Marine.specification.• .Special.paint.systems• .Corrosion.protection• .ATEX.zone.1.specification.• .Chain.collectors.(PVC,.galvanised.or.stainless.steel)• .Air.Service.units• .Festoon.systems• .Radio.control• .Main.air.shut.off.valve
Model Wll Lifting Speed With Load Lifting Speed Without Load Lowering Speed With Load
Tcr Kg M/Min M/Min M/Min1000 1000 6.0 11.3 10.32000/2 2000 3.0 5.7 5.2
Air Consumption Lifting Air Consumption Lowering Air Connection Minimum Hose Dia.Tcr L/Sec L/Sec Inch Inch1000 25 28 1/2" Bsp 1/2" Hose2000/2 25 30 1/2" Bsp 1/2" Hose
Chain Falls Working Pressure Weight With 3M Hol Additional Metre HolTcr Bar Kg Kg1000 1 6 34.0 1.12000/2 2 6 39.7 2.2
All.models.are.available.with.push,.geared.or.air.trolleys.Capacities.available.from.250.kg.up.to.100.tonne
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..329328 |..CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..
7. HOISTS
& W
INCH
ES
AIR HOIST TMH-3000 | TMH-12000/4
Standard features• Toku.rotary.vane.motor• .ATEX.zone.2.specification• .Robust.3.step.planetary.gearbox• .Failsafe.automatic.internal.disc.brake• .Mechanical.upper.&.lower.switches• .Cast.steel.housing• .Internal.silencing.down.to.80.dB(A)• .Alloy.safety.swivel.hooks.with.safety.catch.Load.chain.13.x.36mm.of.
European.manufacture.to.EN818-7• .Automatic.load.limiter
Available options• Marine.specification.• .Special.paint.systems• .Corrosion.protection• .ATEX.zone.1.specification.• .Chain.collectors.(PVC,.galvanised.or.stainless.steel)• .Air.Service.units• .Festoon.systems• .Radio.control
Model Wll Lifting Speed With Load Lifting Speed Without Load Lowering Speed With Load
TMH Kg M/Min M/Min M/Min3000 3000 5.4 10.8 10.2
2.5512000/4 12000 1.35 2.7Air Consumption Lifting Air Consumption Lowering Air Connection Minimum
Hose Dia.Air
ServiceTMH L/Sec L/Sec Inch Inch
3000 56 68 1” BSP 3/4” Hose 1” FLR12000/4 56 68 1” BSP 3/4” Hose 1” FLR
Chain Falls Working Pressure Weight With 3M Hol Additional Metre HolTMH Bar Kg Kg3000 1 6 99 3.812000/4 4 6 190 15.2
All.models.are.available.with.push,.geared.or.air.trolleys.Capacities.available.from.250.kg.up.to.100.tonne
CERTEX.(UK).....Tel..0333.600.3005.....www.certex.co.uk [email protected]..|..329