PROFESSIONAL UPDATES
Dr.V.VIJAYAN M.E.,Ph.D, MISTE. S/o A.Venkatraman
Kuppurepatti- Post,
Lalapet- Via,
Krishnarayapuram-Taluk,
Karur-District.
E-Mail : [email protected]
Mobile : +91 900 3971 300
CAREER OBJECTIVE
Am looking for a good opportunity to work in the field of research and development.
Also interested in motivating young researches to create new ideas through academic knowledge.
EDUCATIONAL QUALIFICATION
Course
Name of Institution Board/University
Year of
Completion
PhD
Design of
Complaint
Mechanism
____ Anna University
Chennai 2015
M.E
Engineering
Design
Kongu Engineering
college, perundurai, Erode.
Anna University
2006
B.E
Mechanical
Engineering
R.V.S.C.E.T
RVS Nager, Dindugal.
Madurai Kamaraj
University 2004
Diploma in
Mechanical
Engineering
The Karur Polytechnic,
Karur.
Board of Technical
Education 2000
A.I.S.L.C
St.John’s Vestry Anglo
Indian Hr Sec School,
Tricy.
Anglo Indian Board 1997
EXPERIENCE
Profession Organization Designation Period
Teaching K.Ramakrishnan college of
Technology, Trichy.
Professor 5 year and
proceeding
Teaching K.Ramakrishnan college of
Engineering, Trichy.
Assistant
Professor
5 year
Teaching M.Kumarasamy college of Engineering,
Karur.
Lecturer 3 ½ year
Industry Indian coach and bus builders, Karur. Supervisor 1 year
AREA OF INTEREST
Design, Analysis of Mechanism, Optimization, Compliant Mechanism, Welding,
Additive Manufacturing.
SUBJECTS HANDLED
Design of Transmission System
Hydraulics And Pneumatics
Kinematics of Machinery
Manufacturing Technology – II
Power plant Engineering
Engineering Graphics
Basics of Civil and Mechanical
Cad lab Faculty incharge
PATENT PUBLICATION DETAILS
Published the patent titled “ELCTRONIC CONTROLLED DELAYED FUEL
INJECTION SYSTEM IN AN IC ENGINE”.
Application No : 5262/CHE/2015
Application field on : 01/10/2015
Published on : 22-04-2016
Published the patent titled “FINE ADJUSTABLE BORING BAR”.
Application No : 201641006702
Application field on : 22/02/2016
Published on : 22-04-2016
Published the patent titled “TREPANNING TOOL HOLDER”.
Application No : 201841015558
Application field on : 24-04-2018
BOOK SERIES PUBLICATION
1. B.Sureshkumar, V.Vijayan and J.Paulo Davim, 2019, Machine Vision in
measurement In: Davim J. (eds) Measurement in Machining and Tribology.
Materials Forming, Machining and Tribology. Springer, Cham.
JOURNAL PUBLICATION DETAILS
1. I. J. Isaac Premkumar, A. Prabhu, V.Vijayan, A.Godwin Antony &
R.Venkatesh, “Combustion analysis of biodiesel blends with different piston
geometries” Journal of Thermal Analysis and Calorimetry, Accepted.
2. P. Parameshwarana, V. Vijayan, K. Radhakrishnan and A. Godwin Antony, “
Evaluation of Mechanical Properties of Banana and Glass-Epoxy Hybrid
Composites with Addition of Copper Powder” Int. J. Vehicle Structures &
Systems, 11(3), 320-324.
3. M.Dhandayuthabani, S.Jegadheeswaran, V.Vijayan and A.Godwin Antony,
“Investigation of latent heat storage system using graphite microparticle
enhancement” Journal of Thermal Analysis and Calorimetry, Article in Press.
4. B.Sureshkumar, V.Vijayan, S.Dinesh, K.Rajaguru, “Neural Network
Modeling for Face Milling Operation ” Int. J. Vehicle Structures & Systems,
11(2), 224-229.
5. C.Saravanan, S.Dinesh, P.Sakthivel, V.Vijayan, B.SureshKumar,“Assessment
of mechanical properties of Silicon Carbide and Graphene reinforced
aluminium composite”, Materials Today: Proceedings, Article in Press.
6. S.Thanikaikarasan, R.Perumal, V.Vijayan, J.Venkatamuthukumar,
“Structural, compositional and optical properties of electrochemically grown
iron diselenide thin films”, Materials Today: Proceedings, Article in Press.
7. T.Raj Kumar, V.Vijayan, R.Yokeswaran, K.Saravanan, D.Ragulnath,
G.ArunKumar, P.Parameswaran, “Experimental evaluation on natural
composites with the incorporation of metal powders” Materials Today:
Proceedings, Article in Press.
8. S.Saravanan, A.V.Balan, S.Dinesh, V.Vijayan, “Electrochemical machining
behaviour of AA6063-TiC composites by using response surface
methodology, Materials Today: Proceedings, Article in Press.
9. K.Rajaguru, T.Karthikeyan, V.Vijayan, “Additive manufacturing – State of
art”, Materials Today: Proceedings, Article in Press.
10. B.Radha Krishnan, V.Vijayan, T.Parameshwaran Pillai, & T.Sathish, “Influence
of Surface Roughness in Turning Process-an Analysis Using Artificial Neural
Network”, Transactions of the Canadian Society for Mechanical Engineering,
Published in Just In.
11. V. Vijayan, B. Sureshkumar, G. Sathishkumar & R. Yokeshwaran “ Analysis of
Machining Parameters in Turning Operation on Duplex 2205 by using RSM for
Vehicle Structure” Int. J. Vehicle Structures & Systems, 11(1), 113-116.
12. A. Parthiban, V. Vijayan, S. Sathish and T. Sathish, “Optimization of Co2 Laser
Cutting Parameter on Motor Cycle Frame Materials”, International Journal of
Recent Technology and Engineering, Vol.8, No.1, pp 409 – 411.
13. T. Sathish, S. Saravanan & V. Vijayan, “Effect of reinforced aluminum alloy
LM30 with pure ceramic particles to evaluate hardness and wear properties”,
Materials Research Innovations, Article in Press.
14. N. Parkunam, P. Laxmanan, G. Navanithakrishnan, S.Arul & V.Vijayan, 2019,
“Experimental Analysis on Passive Cooling of Flat Photovoltaic Panel with
Heat Sink and Wick Structure”, Energy Sources, Part A: Recovery, Utilization,
and Environmental Effects, Article in Press. (SCI Indexed Journal).
15. M. Vivekanandan, R.Venkatesh, T.Sathish, S.Dinesh, M.Ravichandran,V.Vijayan
“Pressure Vessel Design using PV-ELITE Software with Manual Calculations
and Validation by FEM”, Journal of Engineering Technology, Vol 8, No 1, pp
425-433. (SCIE Indexed Journal).
16. P.T.Saravankumar, V. Suresh, V. Vijayan and A. Godwin Antony, 2019,
“Ecological effect of corn oil biofuel with SiO2 nano-additives”, Energy
Sources, Part A: Recovery, Utilization, and Environmental Effects, Article in
Press. (SCI Indexed Journal).
17. V.Vijayan, G.Arunkumar, G.Harithangam, S.Muthukumar & B.Ahamed
Ibrahim, 2018, “Investigation and Preparation of Fly Bottom Ash and
Discussion on Fly Ash Composition – A Review”, International Journal of
Trend in Scientific Research and Development, Vol. 3, no. 1, pp 1278-1284.
18. A. Parthiban, T. Sathish, S. Siva Chandran, R. Venkatesh, & V. Vijayan, 2019,
“Optimization of co2 laser cutting parameters on austenite stainless steel using
grey relational analysis” International Journal of Mechanical Engineering and
Technology, Vol. 10, no 1, pp. 984 –992. (Scopus Indexed Journal).
19. V.Vijayan, S.Sivachandaran, S.Saravanan and V.Sivakumar, 2018,
“Environmental effect of CI engine using microalgae biofuel with nano-
additives” Energy Sources, Part A: Recovery, Utilization, and Environmental
Effects, Article in Press (SCI Indexed Journal).
20. S. Saravanan, A. Godwin Antony, V.Vijayan, M.Loganathan, & S. Baskar, 2019,
“Synthesis of Sio2 Nano Particles by using Sol-Gel Route” International Journal of
Mechanical Engineering and Technology, Vol. 10, no 1, pp. 785 – 790. (Scopus Indexed
Journal).
21. V.Vijayan, S. Saravanan, A. Godwin Antony, M.Loganathan, & S. Baskar, 2019,
“Heat transfer enhancement in mini Compact heat exchanger by using Alumina
nanofluid” International Journal of Mechanical Engineering and Technology, Vol. 10, no 1,
pp. 785 – 790. (Scopus Indexed Journal).
22. R. Venkatesh, V. Vijayan, A. Parthiban, T. Sathish, & S. Siva Chandran, 2018,
“Comparison of different tool path in Pocket Milling” International Journal of
Mechanical Engineering and Technology, Vol. 9, no 12, pp. 922–927. (Scopus Indexed
Journal).
23. A. Godwin Antony, S. Baskar, V.Vijayan, S. Saravanan, & M.Loganathan, 2018,
“Analysis of Wear Behaviour of Aluminium Composites with Silicon Carbide and
Titanium Reinforcement” International Journal of Mechanical Engineering and Technology,
Vol. 9, no 12, pp. 681–691. (Scopus Indexed Journal).
24. S. Baskar, V.Vijayan, S. Saravanan, A.V. Balan & A. Godwin Antony, 2018, “Effect
of Al203, Aluminium Alloy and Fly Ash for Making Engine Component” International
Journal of Mechanical Engineering and Technology, Vol. 9, no 12, pp. 91–96. (Scopus
Indexed Journal).
25. V. Vijayan, A. Parthiban, T. Sathish, S. Siva Chandran & R. Venkatesh, 2018,
“Performance Analysis in End Milling Operation” International Journal of
Mechanical Engineering and Technology, Vol. 9, no 11, pp. 2263–2271. (Scopus Indexed
Journal).
26. B.Radhakrishnan, V.Vijayan, G.Senthilkumar, 2018, “Performance Analysis of
Surface Roughness modeling using Soft Computing Approaches” Applied
Mathematics and information Science, Vol. 12, no.6, pp 1209-1217. (Scopus
Indexed Journal).
27. K. Pradeep Mohan Kumar, V. Vijayan, B. Suresh Kumar, C. M. Vivek, S.
Dinesh, 2018, “Computational Analysis and Optimization of Spiral Plate Heat
Exchanger” Journal of applied Fluid Mechanics, Vol. 11, special Issue, pp 121-
128. (SCIE Indexed Journal).
28. T. Avudaiappan, V. Vijayan, S. Sundara Pandiyan, M. Saravanan, S. Dinesh
“Potential Flow Simulation through Lagrangian Interpolation Meshless Method
Coding” Journal of applied Fluid Mechanics, Vol. 11, special Issue, pp 129-134.
(SCIE Indexed Journal).
29. S.Dinesh, M.Prabhakaran, A.Godwin Antony, K.Rajaguru & V.Vijayan 2017,
“Investigation and Optimization of Machining Parameters in Processing AISI
4340 Alloy Steel with Electric Discharge Machining, International Journal of
Pure and Applied Mathematics, vol.117, no.16, pp.385-391 (Scopus Indexed
Journal)
30. A.M.Rameshbabu, P.Parameshwaran, V.Vijayan, R.Panner, 2017, Diffraction,
microstructure and thermal stability analysis in a double phase nanocrystalline
Al20Mg20Ni20Cr20Ti20 high entropy alloy, Journal of Mechanical behavior
and materials , vol.26, Issue 3-4, pp.127-132 (Scopus Indexed Journal).
31. R.Srinivasan, V.Vijayan, K.Sridhar, 2017, Computational Fluid Dynamic
Analysis of Missile with Grid Fins, Journal of applied Fluid Mechanics, vol.10,
Special Issue, pp.33-39 (SCIE Indexed Journal).
32. A.Godwin Antony, S.Aravind, S.Dinesh, K.Rajaguru & V.Vijayan 2017,
“Analysis and Optimization of Performance Parameters in Computerized I.C.
Engine Using Diesel Blended with Linseed Oil and Leishmaan's Solution,
Mechanics and Mechanical Engineering, vol.21, no.2, pp.193-205 (Scopus
Indexed Impact factor: 0.11)
33. S.Dinesh, A.Godwin Antony, K.Rajaguru & V.Vijayan 2017, “Experimental
Investigation and Optimization of Material Removal Rate and Surface
Roughness in Centerless Grinding of Magnesium Alloy Using Grey Relational
Analysis, Mechanics and Mechanical Engineering, vol.21, no.1, pp.17-28
(Scopus Indexed Impact factor: 0.11)
34. B.Suresh Kumar, V.Vijayan, N. Baskar, 2016, Comparison of coated and
uncoated carbide drill bits for drilling titanium grade 2 material, Mechanika,
vol.22, no.6, pp.571-575(SCIE Indexed Journal).
35. B.Suresh Kumar, V.Vijayan, N. Baskar, 2016, Burr Dimension Analysis on
Various Materials for Convenantionally and CNC Drilled Holes, Mechanics
and Mechanical Engineering, vol.20, no.3, pp.347-354. (Scopus Indexed
Impact factor: 0.11)
36. R.Venkatesh, V.Vijayan, 2016, Performance Evaluation of Multipurpose Solar
Heating System, Mechanics and Mechanical Engineering, vol.20, no.4, pp.359-
370(Scopus Indexed Impact factor: 0.11)
37. Rajkumar T., Karuppusamy S., Vijayan V., 2016, Testing of Mechanical
Properties of Hybrid Fiber Reinforced Composites, Asian Journal of Research
in Social Sciences and Humanities, Vol. 6, No. 10, pp 213- 225.
38. Karuppusamy S., Karthikeyan G., Dinesh S., Rajkumar T., Dr. Vijayan V., Bas
ha J. Kalil, 2016, Design and Analysis of Automotive Wheel Rim by using
ANSYS and MSC Fatigue Software, Asian Journal of Research in Social
Sciences and Humanities, Vol. 6, No. 10, pp 196- 212.
39. Dinesh S, Antony A Godwin, Karuppusamy S, Kumar B Suresh, Vijayan V,
2016, Experimental Investigation and Optimization of Machining Parameters in
CNC Turning Operation of Duplex Stainless Steel, Asian Journal of Research in
Social Sciences and Humanities, Vol. 6, No. 10, pp 179- 195.
40. S. Dinesh, A. Godwin Antony, K. Rajaguru, Dr.V.Vijayan, 2016, Investigation
and Prediction of Material Removal Rate and Surface Roughness in CNC
Turning of En24 Alloy Steel, , Mechanics and Mechanical Engineering, vol.20, no.4, pp.451-466. (Scopus Indexed Impact factor: 0.11)
41. B. Suresh Kumar, V. Vijayan, N. Baskar, 2014, ‘ Optimization of Drilling
Process Parameters for Material Removal Rate and Surface Roughness on
Titanium Alloy using Response Surface Methodology and Fire Fly Algorithm’,
Asian Journal of Research in Social Sciences and Humanities,, Vol. 6, No. 5,
May 2016, pp.1251-1267.
42. Vijayan, V, & Karthikeyan, T, 2014, ‘Passive Vibration Isolation by
Compliant Mechanism Using Topology Optimization with Building Blocks’,
Research Journal of Applied Sciences, Engineering and Technology,vol.8,
no.13, pp.1522-1530. (Impact factor: 0.16) (Scopus Indexed Impact factor:
0.11)
43. Vijayan, V, Karthikeyan, T, Udayakumar, M & Chellamuthu, K 2014,
‘Passive Vibration Isolation by Compliant Mechanism using Topology
Optimization’, International Journal of Acoustics and Vibration,
vol.19, no.4, pp.269-275. (SCIE Indexed Journal).
44. Vijayan, V & Karthikeyan, T 2014, ‘Material selection of Compliant
Mechanism for Vibration Isolation’, Mechanics and Mechanical Engineering,
vol.18, no.2, pp.121-134. (Scopus Indexed Impact factor: 0.11)
45. Vijayan, V & Karthikeyan, T 2013, ‘Design of Compliant Mechanism for
Vibration Isolation using Topology Optimization and Flexible Building Blocks’,
Journal of Engineering and Technology,vol.3, no.1, pp. 46-51.
DOI:10.4103/0976-8580.107101.
46. Rajesh R, Vijayan, V & Karthikeyan, T 2013, ‘Topology Optimization and
Flexible Building Block Design and Analysis of Compliant Mechanism for
Vibration Isolation’, International Journal of Scientific & Engineering Research,
Volume 4, Issue 8.
47. Vijayan, V & Karthikeyan, T 2012, ‘Comparison of Numerical data of
Compliant Actuator with FEA Technique’, European Journal of Scientific
Research, vol.76, no.1, pp.74-82. (Scopus Indexed Journal).
48. Vijayan, V & Karthikeyan, T 2009, ‘Design and Analysis of Compliant
Mechanism for Active Vibration Isolation using FEA Technique’, International
Journal of Recent Trends in Engineering, vol.1, no.5, pp.77-81.
PAPER PUBLICATION AND PRESENTED DETAILS
1. Published the paper titled “A Study and Analysis of complaint mechanism for
Active Vibration Isolation using FEA Technique” in International Conference
on Fascinating Advancement in Mechanical Engineering organized by Mepco
Engineering College at Sivkasi on 11-13 December 2008. (FAME 2008).
2. Published the paper titled “Active Vibration Isolation using complaint
mechanism” in International Conference organized by universiti Malaysia Perlis
at Malaysia on 25-26 October 2007. (CADM 2007).
3. Presented the paper titled “Analysis of Complaint Actuator for Active Vibration
Isolation” in International Conference organized by Sethu institute Technology
at Madurai on 9-11 August 2007. (ICADM 2007).
4. Presented the paper titled “Design of Complaint Actuator for Active Vibration
Isolation” in National Conference organized by Birla Institute of Technology at
Bilani on 17-18 February 2006. (DPLC 2006).
5. Presented the paper titled “Design of Complaint Actuator for Active Vibration
Isolation” in National Conference organized by St.joseph Engineering College
at Chennai on 02 February 2006. (TECM 2006).
1. Maejo International Journal of Science and Technology (MIJST) – SCIE indexed
2. International Journal of Mechanical And Production Engineering Research And
Development (IJMPERD) – Scopus indexed
3. International Journal of Rapid Manufacturing – Inderscience Publisher
4. SN Applied Science – Springer Publisher
1. Journal of Applied fluid mechanics (SCIE Indexed)
http://jafmonline.net/web/guest/home?p_p_id=JournalArchive_WAR_JournalArchive_INSTA
NCE_nvhn&p_p_action=0&p_p_state=maximized&p_p_mode=view&_JournalArchiv
e_WAR_JournalArchive_INSTANCE_nvhn_form_page=main_form&selectedVolume
Id=73&selectedIssueId=244 2. International Journal of Rapid Manufacturing – Inderscience Publisher
http://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijrapidm
3. SN Applied Science – Springer Publisher
https://www.springer.com/engineering/journal/42452?detailsPage=societies
4. Computer Modeling in Engineering & Sciences – SCI Indexed - Innovations and
current trends in Nanomaterials for soft computing and energy applications.
EDITORIAL MEMBER
GUEST EDITOR DETAILS FOR SPECIAL ISSUE
REVIEWER DETAILS
1. International Journal of Manufacturing, Materials, and Mechanical Engineering
(IJMMME)
2. Progress in Industrial Ecology, An International Journal (PIE)
3. International Journal of Computer Aided Engineering and Technology. (IJCAET)
4. International Journal of Manufacturing Technology and Management. (IJMTM)
5. International Journal of Additive and Subtractive Materials Manufacturing.
(IJASMM)
6. International Journal of Engineering Research & Technology (IJERT)
7. International Journal of Rapid Manufacturing .(IJRAPIDM)
1. Indian Society for Technical Education (ISTE)
2. International association of Engineers.(IAENG: 174480)
3. International Society for Research and Development.(ISRD)
Sl.no Name of the Candidates Title
1. Yokeshwaran R Comprehensive analysis of tungsten inert
gas welding parameters for surface
modification.
2. Radha Krishnan B Surface Roughness modeling for machine
vision system.
1. Convener for the International Conference on Newer Engineering Concepts and
Technology (iConnect2K18) dated: 23.03.2018 & 24.03.2018.
2. Convener for the International Conference on Newer Engineering Concepts and
Technology (iConnect2K17) dated: 28.03.2017 & 29.03.2017.
Membership
LIST OF RESEARCH PROJECTS GUIDED / GUIDING FOR PhD:
Program Organized
3. Convener for the National Conference ATME’16 dated: 02.03.2016
4. Convener for the National Level Technical Symposium dated: 09.09.2016
5. Workshop on Piping by ISS CAD date: 30.09.2016
6. Workshop on NDT by ISS CAD date: 29.09.2016
7. Workshop on TIG and MIG Welding by Dr.P.Sathya, Associate Proff.NIT
Trichy date: 14.09.2016
8. Workshop on 3D Printing Technology by Dr.Vinod, NIT Trichy date:
14.09.2016
9. Workshop on 3D Printing Technology by Engineering Solution, Erode dated:
22.03.2016 and 23.03.2016
10. Convener for the National Conference ATME’15 dated: 10.03.2015
11. Convener for the National Level Technical Symposium dated: 15.09.2015
12. Workshop on Quadcopter by Wingfotech dated: 17.03.2016 and 18.03.2016
13. Workshop on CNC by Prim CNC Institute dated: 14.03.2016
14. Workshop on NDT by Dr.P.Ramanathan-Ex Dept.Manager BHEL ISS CAD
date: 16.09.2015
15. Workshop on NDT by Dr.P.Ramanathan-Ex Dept.Manager BHEL ISS CAD
date: 10.09.2015
1. Vijayan. V, Dinesh. S, K.Radhakrishnan, 2018, Unconventional Machining
Process, Maruthi Publishers, Chennai, India
2. Anbarasan. M, Senthilkumar. N, Vijayan. V and Dinesh. S, 2018,
Manufacturing Technology – II, Maruthi Publishers, Chennai, India
3. Anbarasan. M, Senthilkumar. N, Vijayan. V and Dinesh. S., 2018,
Manufacturing Technology – I, Maruthi Publishers., Chennai, India.
4. Vijayan.V and Ramakrishnan.H, 2014. Total Quality Management. Scand
Publication, New Delhi. India.
5. Vijayan V, Prabhakaran M and Vaisnavi R,. 2012. Basic Civil and Mechanical
Engineering. Scand Publication, New Delhi. India.
6. Vijayan V and Venkatesh R., Engineering Graphics, 2011. Maruthi Publishers.,
Chennai, India.
Attended 3 days Training program on “Academic Leadership” at VIT, Vellore, dated
04.05.2017 to 06.05.2017.
Book Publication
SEMINARS AND WORKSHOP ATTENDED DETAILS
Attended a One day Workshop on “Recent Trends in AWJM” at Madras Institute of
Technology, Chennai on Feb 19, 2016.
Attended a One day National Workshop on “Statistical Tools and Strategies for
Research Scholars” at Sona College of Technology, Salem on 26.06.2009.
Attended “Two day CSIR Sponsored National Seminar on AUTO-TELEMATICS
organized by K.S.Rangasamy College of Technology, Tiruchengode on 10 & 11
October 2008.
Attended “One Day Orientation Programme for Engineering Graphics Subject
organised by Anna University Coimbatore held at Krishna Engineering College,
Coimbatore on 13 September 2008.
Attended “Six Days AICTE Sponsored Summer School On e-Content
Development and Delivery Programme organised by NIIIIR held at
M.Kumarasamy College of Engineering, Karur on 30.06.08 to 5.07.08.
Attended “One Day Orientation Programme for NSS Programme Officers”
organised by Anna University at Coimbatore on January 2008.
Attended “one Day Seminar on Technologies for Rural Development and NSS
Exhibition” organised by MAMCE at Trichy on 17 March 2007.
Attended “Two Day AICTE Sponsored National Seminar on AUTO-MEMS”
organised by Kongu Engg College at Perundurai on 19-20 January 2007.
Attended “One Day Orientation Programme for NSS Programme Officers”
organised by Anna University at Chennai on 11 August 2006.
PROJECT DETAILS
Title : Design OF Complaint Actuator for Active Vibration Isolation
Academic: Final year M.E. Project
Objective: To reduce the amplitude of vibration by using Complaint Mechanism.
Title : Design of integral spindle unit for CNC lathe
Academic: Final year B.E. Project
Objective: To directly mount the stator and rotor on spindle housing itself.
SOFTWARE KNOWLEDGE
AUTO CAD 2016
CREO 3.0
Solidworks 2016
Ansys 15.0
PERSONAL DETAILS
Name : Dr.V.VIJAYAN
Date of Birth : 10.06.1981
Marital Status : Married
Languages Known : English, Tamil
Residential Address : V.Vijayan
S/o A.Venkatraman
Kuppurepatti- Post,
Lalapet- Via,
Krishnarayapuram-Taluk,
Karur- District.
E-Mail : [email protected]
Mobile : +91900 3971 300.
Place :
Date : (V.Vijayan)