173
2017
H 6 mm
3
H 8 mm
H 10 mm
H 12,5 mm
H 15 mm
H 20 mm
H 6 mm
3
H 8 mm
H 10 mm
H 12,5 mm
H 15 mm
H 20 mm
PROTERMINAL CURVE are a range of edging and joining profiles that may be curved/shaped. They feature a special system of perforations allowing them to be bent easily so that particular geometric shapes may be easily obtained in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and with a separation of 3 mm of sandable profile. The product is made in natural brass in 2.7 m bars and heights of 6, 8, 10, 12.5, 15 and 20 mm.
PROTERMINAL CURVE are a range of edging and joining profiles that may be curved/shaped. They feature a special system of perforations allowing them to be bent easily so that particular geometric shapes may be easily obtained in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and with a separation of 3 mm of sandable profile. The product is made in natural aluminium in 2.7 m bars and heights of 6, 8, 10, 12.5, 15 and 20 mm.
PROTERMINAL CURVE
NATURAL BRASS CURVABLE
PROTERMINAL CURVE
NATURAL ALUMINIUM CURVABLE
NATURAL BRASS CURVABLE thermo packed 10pcsbar length 2,7 lm - pack. 40 Pcs - 108 lm (H:15; 20 mm - 54 lm)
NATURAL ALUMINIUM CURVABLE thermo packed 10 Pcsbar length 2,7 lm - pack. 40 Pcs - 108 lm
Article H mmPTONCV 06 6PTONCV 08 8PTONCV 10 10PTONCV 125 12,5PTONCV 15 15PTONCV 20 20
Article H mmPTANCV 06 6PTANCV 08 8PTANCV 10 10PTANCV 125 12,5PTANCV 15 15PTANCV 20 20
1. Choose the “PROTERMINAL CURVE” in the required height and material. 2. Cut the profile to the necessary length, calculating thetotal length. 3. Bend the profile mechanically with the PROCURVEMACHINE. 4. If necessary fix with screws and screw anchors or simplyinsert the punched base under the floor laid with the same adhesive.Any oxidation marks may be easily removed with specific chemical products (Sidol-Smac, etc.). If it is used as a joining profile, bring each floor to the edge of the profile.
EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS
EXEMPLES OF LAYING (for laying instructions, see above)
COLOURS
ON - Natural brass
COLOURS
AN - Natural aluminium
PTONCV 06
PTANCV 06
PTONCV 08
PTANCV 08
PTONCV 10
PTANCV 10
PTONCV 125
PTANCV 125
PTONCV 15
PTANCV 15
PTONCV 20
PTANCV 20
= On demand, price and delivery time to be agreed.