141
REFERENCES
7.1 LITERATURE REVIEW
7.1.1 Review papers
1. Barnes, M., “Form and stress engineering of tension structures”,
Structural Engineering Review. Vol.6, 1994, pp.175–202.
2. Berke, L., Venkayya, V. B., “Review of optimality criteria approaches
to structural optimization”, In: Schmit, L. A. (ed.): Structural
optimization symposium, New York, 1974,pp. 23-34.
3. Byug Man Kwak, “A Review on shape optimal design and sensitivity
Analysis”, Structural Engineering/Earthquake Engineering,
Vol.10,No.4, 1994, pp.159-174
4. Ding, Y., “Shape optimization of structures – a literature
Survey”, Computers and Structures, Vol. 24, 1986,pp 985–1004
5. Haftka, R.T., Grandhi, R.V., “Structural shape optimization
– a survey”, Computed Methods and Applications in Mechanical
Engineering, Vol. 57, 1986, pp.91–106.
6. Jaroslav Mackerle, “Topology and shape optimization of structures
using FEM and BEM;A bibliography(1999-2001)”,Finite elements in
Analysis and Design,Vol.30, No.3,2003,pp.243-253
7. Levy R., and Lev O., “Recent developments in structural
optimization”, ASCE journal of Engineering structural
division,Vol.113,1987,pp.1939-1962
8. Ozka, M, Uysal, H., “General Aspects of Evolutionary Structural
142
Optimization : A Review”, Journal of Engineering Sciences, Vol. 15,
No. 3, 2009, pp.386
9. Pathak, K.K.,Sehgal, D.K., Saleem Akthar and Bhandari S.S., “A
Review of structural shape optimization techniques”, International
Journal of structural Engineering,Vol.33,No.6,2007,pp.504-514
10. Qatu M. S, “Recent research advances in the dynamic behavior of
shells,1989–2000, Part 1:laminated composite shells”, Applied
Mechanics Reviews, 55, 2002,pp.325 – 350.
11. Qatu, M. S. ,“Recent research advances in the dynamic behavior of
shells,Part 2: homogeneous shells”, Applied Mechanics Reviews,
Vol.55,2002, pp.415434
12. Qing Quan Liang, “Performance-Based Optimization: A Review”,
Faculty of Engineering and Surveying, University of Southern
Queensland, Toowoomba, QLD 4350, Australia
13. Qing, Quan, Liang , “Performance-Based Optimization: A Review”,
Advances in Structural Engineering,Vol.10,No.6,2009,pp. 739-753
14. Rozvany, G.I.N. , “Stress Ratio and Compliance Based Methods in
Topology Optimization - a Critical Review”, Structural and
Multidisciplinary Optimization, Vol. 21, 2001, pp.109- 119.
15. Rozvany, G.I.N., “A critical review of established methods f
structural topology optimization”, Vol. 37, No.3, 2009,pp. 217-237.
16. Rozvany, G.I.N., Bendsoe, M.P., Kirsh, U. , “Layout Optimization of
Structures”, Applied Mechanics Reviews, Vol.48, No.2, 1995, pp.41-
143
118.
17. Samareh,J.a., “A survey of shape parametrization techniques”,
CEAS/AIAA/ICASE/NASA Langley international Forum on Aero
Elasticity and Structural Dynamics, Williamsburg,1999.
18. Sigmund, O., Petersson, J., “Numerical instabilities in
topology optimization: A survey on procedures dealing with
checkerboards, mesh-dependencies and local minima.”, Structural
Optimization,1998,Vol.6, pp.68–75
19. Vanderplaats, G.N., “Structural optimization – past,
present and future”,1982, AIAA J. Vol.20,pp. 992–1000
20. Yeh Liang Hsu, “A review of structural shape optimization,”
Computers in Industry, Vol. 25, 1994, pp. 3-13.
7.2 Technical papers 7.2.1 Thickness/Shape Optimization
21. Adali, S, Verijenko, V.E, Richter, A., “Minimum sensitivity design of
laminated shells under axial load and external pressure”, Composite
Structures, Vol.54, No.2-3, 2001, pp. 139-142.
22. Afonso, S. M. B. and Hinton,E., “Free vibration analysis and shape
optimization of variable thickness plates and shells—II. Sensitivity
analysis and shape optimization”, Computing Systems in
Engineering,Vol.6,No.1,1995,pp.47-66
23. Akira Hasegawa, “Shape optimization of two dimensional bodies by
144
boundary changing method and thickness changing method”,
International Journal for Numerical Methods in Engineering, Vol.
34,No.3, 1992,pp. 889–892
24. Akl, W., Razzen and Baz, A., “Optimal design of underwater stiffened
shells”, Journal of structural and multi disciplinary Optimization,
Vol.23, 2002, pp.297-310.
25. Antonio Tomás and Pascual Martí, “Shape and size optimization of
concrete shells Engineering structures”, Vol.32, No. 6, 2010, pp.
1650-1658
26. Araar, M., Julien, J.F., “Buckling of cylindrical shells under external
pressure proposition of a new shape of self-stiffened shell”,
Structural Engineering and Mechanics, Vol. 4,No.4,2006,pp.451-
460.
27. Babuska, I., and Rheinboldt, W. C., "Analysis of Optimal Finite
Element Meshes in R", Mathematics of Computation,1979, Vol. 33,
pp. 431-463
28. Bennett, J.A. and Botkin, M.E., “Structural shape optimization with
geometric problem description and adaptive mesh refinement”,
American Institute of Aeronautics and Astronautics journal,
Vol.23,1985, pp.458-464.
29. Bhavikatti, S.S., and Ramakrishnan, C.V., “Optimum Shape design
of Rotating Disks”, Computers and Structures, Vol. 11,1980,pp.379-
401.
145
30. Bhavikatti,S.S, and Ramakrishnan, C.V, “Computational efficiency
of improved move limit method of sequencial linear programming for
structural optimization”, Computers and Structutres, Vol.
11,1980,pp.191-196.
31. Bletzinger, K U., Kimmich, S., Ramm, E., “Efficient modeling in
shape optimal design”, Computer Systems and Engineering, 1991,
Vol. 2, pp. 483-495.
32. Bletzinger, K.U., Firl, M., Daoud, F., “Approximation of derivatives
in semianalytical structural optimization”, III European Conference
on Computational Mechanics, Lisbon Portugal, 2006.
33. Bletzinger,K.U., Ramm, E., “Structural optimization and form
finding of light weight structures”, Computers and Structures,
2001,Vol.79,No.22-25,pp.2053-62.
34. Bletzinger,K.U., Wuchner, R., Daoud, F., Camprubı, N. ,
“Computational methods for form finding and optimization of shells
and membranes”, Computer Methods and Applications in
Mechanical Engineering, Vol.194,2005,pp.3438–3452.
35. Botkin, M.E, “Shape Optimization of plates and shell structures”,
AIAA journal, Vol. 20, No. 2,pp.
36. Braibant, V. and Fleury, C., “Shape optimal Design using B-
splines”, Computer methods in Applied Mechanics and
Engineering,Vol.44, 1984,pp.247-267.
146
37. Braibant,V. and Fleury, C. and Beckers, C., “ Shape optimal Design:
An approach matching CAD and optimization concept ”,Report
No.SA-109,Aerospace laboratory, University of Liege,Belgium,1983.
38. Bratus, A.S., “Design of Cylindrical shells of minimum weight with
fixed natural frequency oscillation frequencies”, Journal of applied
mathematics and Mechanics,Vo.47,1983,pp.650-657.
39. Chapelle, D, Bathe, KJ, “Fundamental considerations for the finite
element analysis of shell structures”, Computer & Structures.
Vol.66,No.1, 1998,pp. 19-36.
40. Chen,T.Y. and Yu,C.C.,”Shape optimization of openings in a
composite laminated plate”,Third International Conference on
Computer aided optimum design of structures,Zaragoza,1993.
41. Cheung,M.S. and Cheung, Y.K., “Analysis of curved box girder
bridge by finite strip method”, IABSE Publication, Vol. 31,No.1,
1971, pp.1-19.
42. Daoud,F., Camprubi, N., Bletzinger, K.-U., “Filtering and
regularization shape optimization techniques for optimization with
CAD-free parametrization”, Book of Abstracts of Third M.I.T.
Conference on Computational Fluid and Solid Mechanics, M.I.T,
Cambridge, MA, USA, 2005.
43. David, P., Thambiratnam, V., Thevendran, S. L., Chang, S. L.,
“maximization of natural frequencies of cylindrical shells”,
147
Engineering Optimization, Vol.13, No. 2, 1988 , pp. 85 - 97
44. Dawe, D.J. and Peshkam, V., “Bucking and vibration of finite-length
composite prismatic plate structures with diaphragm ends”,
Computer Methods and Applications in Mechanical Engineering,
Vol.77, 1989,pp.1-30.
45. Galante, M., “Genetic Algorithms as an Approach to Optimize Real-
Word Trusses,” International Journal for Numerical Methods in
Engineering, Vol. 39, 1996, pp. 361–382.
46. Ghasemi, M. R., and Hinton, E., “Truss Optimization Using Genetic
Algorithms,” Journal of Engineering Computations, Vol. 16, No. 3,
1999, pp. 272–301.
47. Gotsis, P.K., “Structural optimization of shell structures”,
Computers and Structures, Vol.50, No.4, 1994, pp.499-507.
48. Guan, H., “Effect of sizes and positions of web openings on strut-
and-tie models of deep beams”, Advances in Structural Engineering,
Vol.8, No.1, 2005, pp. 69-83.
49. Guan,H., “Strut-and-tie model of deep beams with web openings- An
optimization approach”, International journal of Structural
Engineering and Mechanics,Vol.19,No.4,2005,pp.361-379
50. Gutkowskia,W., Bauera,J and Zdzisław Iwanowa, “Discrete
structural Optimization”, Computer Methods in Applied Mechanics
and Engineering, Vol.51, No.1-3, 1985, pp. 71-78
51. Hartman, D. and Neummann, M., “Structural optimization of a box
148
girder bridge by means of the finite strip method”, Computer Aided
Optimum Design of Structures, Vol.No.4,1989 pp.337-346
52. Heller,M., Kaye,R. and Rose,L.R.F., “A gradientless finite element
procedure for shape optimization”, The Journal of Strain Analysis
for Engineering Design,Vol.34, 1999,pp: 323-336
53. Hemada, M., Seguchi, Y. and Tada, Y., “Shape determination
problems of structures by inverse variational principles”, Bulletin of
journal of structural and Mechanical
Engineering,Vol.10,1980,pp.123-184.
54. Hernndez, S., Fontn, A.N., “Shape and size optimization of three
dimensional shells”, In: Astudillo R, Madrid AJ, editors. Shells and
spatial structures: From recent past to the next millennium. Proc
40th cong IASS. Vol. 1, 1999, pp. 41-57. [15]
55. HHinton, E., Rao, N.V.R. and Ozakca, M., “An integrated approach to
structural shape optimization of linearly elastic structures, Part I:
General methodology and Part II: Shape definition and adaptivity”,
Computing Systems in Engineering, Vol. 2, No. 1, 1991, pp. 27-39 and
41-56.
56. Hinton, E. and Rao, N.V.R., “Analysis and Shape Optimization of
variable thickness prismatic folded plates and curved shells. Part 1:
finite strip formulation”, Thin walled structures, Vol.17, 1993,
pp.81-111.
57. Hinton, E. and Rao, N.V.R., “Structural Shape Optimization of
149
Shells and Folded Plates using Two-noded Finite Strips”, Computers
and Structures, Vol. 46, No. 6, 1993, pp. 1055-2072
58. Hinton, E., Ozakca, M. and Rao, N.V.R., “Free vibration analysis and
shape optimization of variable thickness prismatic folded plates and
curved shells Part 1 and 2”,Journal of Sound and Vibration, Vol.
181, 1995, pp. 553-566 and 567-581.
59. Hinton, E., Ozakca, M. and Rao, N.V.R., “Free vibration analysis and
shape optimization of prismatic folded plates and shells with
circular curved plan form”, International Journal of Numerical
Methods in Engineering, Vol. 37, 1994, pp. 1713-1739.
60. Hinton, E., OZakca, M. and Rao, N.V.R., “Free vibration analysis
and shape optimization of variable thickness prismatic folded plates
and curved shells-Part I: Finite Strip formulation”, Journal of Sound
and Vibration, Vol.181,No.4, 1995,pp.553-556.
61. Hinton, E., Rao, N.V.R, Ozakca, M, “Mesh generation with adaptive
finite element analysis”, Advance engineering software, ,Vol.13,
1991,pp.238-262
62. Hinton, E., Rao, N.V.R. and Sienz, J., “Finite element structural
shape and thickness optimization of axi-symmetric shells”,
Engineering Computations, Vol. 9, 1992, pp. 499-527.
63. Hiroshi, O., Kenji, Y., “Optimization of Shell and Spatial Structure
for Specified Stress Distribution”,1998, Memoirs the School of
Engineering, Nagoya University Vol.50, No.1
150
64. Hyman, B.I., Lucas, A.W., Jr., “An optimum design for the
instability of cylindrical shells under lateral pressure”, AIAA
Journal, Vol. 9,1971,pp.738-740.
65. Kandasamy, and A. V. Singh, “Free vibration analysis of skewed
open circular cylindrical Shells”, Journal of Sound and Vibration,
2006, Vol.290, pp.1111–1118.
66. Kegl, M. and Brank, B., “Shape optimization of truss-stiffened shell
structures with variable thickness,” Computer Methods in Applied
Mechanics and Engineering, Vol. 195, No. 19-22, 2006, pp. 2611-
2634.
67. Kikuchi, N., Chung, K.Y., Torigaki, T., Taylor, E., “Adaptive
Finite element methods for shape optimization”, Comp.Meth. Appl.
Mech. Engrg., Vol.57, 1986, pp.67–89
68. Kimmich,S. and Ramm,E., “Structural optimization and analysis
with program system CARAT”, Discretization methods instructural
Optimization-Procedures and applications, Springer –
Verlag,Berlin,1989,pp.186-193
69. Kollegger, J. and Mehlhorn, G.,“Analysis of a Free-Formed
Reinforced Concrete Model Shell”, Proceedings of 2nd International
Conference on Computer Aided Analysis and Design of Concrete
Structures, Pineridge Press, 1990.
70. Li, Q., Steven, G.P., Xie, Y.M., “A simple checkerboard suppression
algorithm for evolutionary structural optimization”, Journal of
151
structural and multi disciplinary Optimization , Vol. 22, No. 3,2001,
pp. 230- 239.
71. Liang, Q. Q., Xie, Y. M. and Steven, G. P., “Topology Optimization of
Strut-and-Tie Models in Reinforced Concrete Structures Using an
Evolutionary Procedure”, ACI Structural Journal, Vol.97,No. 2,
2000, pp. 322-331.
72. Lindby, T. and Santos J. L. T., “Shape optimization of three-
dimensional shell structures with the shape parameterization of
a CAD system”, Structural Optimization, Vol.18, 1999, pp.126-33.
73. Linhard, J., Wuchner, R., Bletzinger, K.U., “Introducing cutting
patterns in form finding and structural analysis”,Textile Composites
and Inflatable Structures II, Springer, 2008.
74. Maisel, B.I., “Analysis of Concrete Box Beams Using Small-
Computer Capacity”, C&CA, Development Report No.5, 1982.
London, United Kingdom.
75. Mattheck, C, “Engineering components grow like trees”,
Materialwiss. u Werkstofftechnik ,Vol.21, 1990,pp. 143-169
76. Mattheck, C., “Why they grow, how they grow the mechanics of
trees”, Agricultural Journal, Vol. 14,1990, pp. 1- 17.
77. Mota Soares, C.M.,Barbosa, J.I, Mota Soares, C.A and Pinto P.,
“Optimal Design of axisymmetric shell structures”, Finite Element
Methods in Computer Aided Design, 1987,pp.68-78
78. N. Camprubí, M. Bischoff, K.-U. Bletzinger. , .On the significance of
152
locking on shape optimization of shells., Contribution to the 2nd
M.I.T. Conference on Computational Fluid and Solid Mechanics.
June 2003.
79. Oda, J. and Yamazaki, K., “On a technique to obtain strength shape
of axisymmetric body by the finite element method-Application to
the problem under body force”, Bulletin of journal of structural and
Mechanical Engineering, Vol. 22, 1979, pp.131-140.
80. Oda, J., and Yamazaki, K., “On a technique to obtain strength
shape of Axisymmetric body by the finite element method”, Bulletin
of journal of structural and Mechanical Engineering, Vol. 20,
1977,pp.1524-1532.
81. Ohmori, H. and Ohki, Y., “Shape Finding Analysis by using
Hanging Membrane”, Proceedings of National Congress for Applied
Mechanics, Vol.43, 1994, pp.11–18
82. Ohmori, H., “On the Structural Configuration Mechanics by Using
Variational Principles”, Proc. International Association of Shell and
Spatial Structures (IASS), Vol.1, 1992, pp.894–905
83. Ohmori,H. and Yamamoto,K., “Shape Optimization of Shell and
Spatial Structures for Specified Stress Distribution (Part1: Shell
Analysis)”, Journal of IASS, Vol. 39. No. 1, 1998,pp. 3-13
84. Ohmori,H. and Yamamoto,K., “Shape Optimization of Shell and
Spatial Structures for Specified Stress Distribution (Part2: Space
Frame Analysis)”, Journal of IASS, Vol. 39.No. 3, 1998,pp. 147-157
153
85. Olhoff, N., “Optimal design with respect to structural eigen values”
,Theoretical and Applied Mechanics, Proc. XVth Int. IUTAM
Congress, North-Holland, 1980, pp. 133–149
86. Ozakca, M. and N. Taysi, “Analysis and Shape optimization of
variable thickness box girder bridges in curved platform”, Electronic
Journal of Structural Engineering, Vol.3 2003,pp.1-22
87. Pourazady, M. and FU, Z., “An integrated approach to structural
shape Optimization”, Computers and
Structures,Vol.60,No.2,1996,pp.279-289
88. Prager, W. and Taylor, J.E., “Problems of Optimal Structural
Design”, Journal of Applied Mechanics, 1968,,ASME, Vol.35,
pp.122-106.
89. Prager, W., “Optimization of Structural Design”, Journal of
Optimization Theory and Application,,1976, Vol.6, No.1, pp.1-21.
90. Prasad,B., Haftaka, R.T., “Optimum structural design with plate
elements”, ASCE Structural Engineering journal,Vol.no.11, 1979,
pp247-263
91. Pugnale, Alberto and Sassone, Mario, ”Morphogenesis and
Structural Optimization of Shell Structures with the Aid of a Genetic
Algorithm”, Journal of the International Association for Shell and
Spatial Structures, Vol. 48, No. 155, 2007, pp. 161-166.
92. Rajeev, S., and Krishnamoorty, C. S., “Discrete Optimization of
Structures Using Genetic Algorithms,” Journal of Structural
154
Engineering, Vol. 118, 1992, pp. 1233–1250.
93. Ramm, E. and Reitinger, R., “Force follows form in shell design”,
Proceedings of IASS-CSME International Congress on Innovative
Large Span Structures, 1992, pp.13–17
94. Ramm, E., Bletzinger, K.-U., Reitinger, R., Maute, K., “The challenge
of structural optimization”, Advances in structural optimization,
1994,pp.27-52.
95. Ramm,E, Bletzinger,K.U, Kimmich, S., “Strategies in shape
optimization of free form shells”,1991,Nonlinear computational
mechanics-a state of art, springer, berlin, Heidelberg
96. Ramm,E., “Shape Finding Methods of Shells”, Bulletin of the
International Association for Shell and Spatial Structures, Vol. 33,
1992,pp. 89-99,
97. Rao N.V.R., and Dhondy R.K., “Shape Optimization with Prescribed
Movement Directions of Design Variables with Weight Minimization
as Objective,” Journal of The Institution of Engineers (India),
Mechanical Engineering Division, Vol. 89, 2008, pp. 44-49.
98. Rao, N.V.R. and Hinton, E., “Structural optimization of variable-
thickness plates and free-form shell structures,” Structural
Engineering Review, Vol. 5, No.1, 1993, pp. 1-21.
99. Rasmussen, J., “The structural Optimization systems CAOS”,
Structural Optimization, Vol. 1, 1990, pp.109-116.
100. Razaqpur, A.G. and Li, H.G., “Thin walled multi-cell box girder finite
155
element”, Journal of Structural Engineering, Vol.117, No.10, 1991,
pp.2953-2971.
101. Razaqpur, A.G., and H.G. Li, “Refined analysis of curved thin-walled
multi-cell box-girders”, Computers and Structures, Vol.53, No.1,
1994, pp.131-142.
102. Renner, G. and Ekart, A. “Genetic Algorithms in Computer Aided
Design”, Computer Aided Design, Vol.35, 2003, pp.709-726
103. Rotter, JM, “Shell structures: the new European standard and
current research needs”, Thin-walled Structures, Vol.31,No.1-
3,1998, pp. 3-23.
104. Rozvany,G.I.N., Zhou, M. and Birker, T., “Generalized shape
optimization without homogenization”, Structural Optimization, Vol.
4, 1992, pp. 250-254.
105. Rupesh Kumar D., and Ramana Rao N.V., “Shape Optimization of
Bridge Pier with Weight Minimization as Objective,” Journal of the
Indian Road Congress, (Accepted for publication vide Letter No. IRC-
6(110)/2008 Dt. 17-08-2009).
106. Rupesh Kumar D., and Ramana Rao N.V., “Shape Optimization with
Prescribed Movement Directions of Design Variables with Stress
Leveling as Objective,” Journal of Structural Engineering, Vol. 34,
No. 5, December 2007-Janurary 2008, pp. 377-383.
107. Rupesh Kumar D., and Ramana Rao N.V., “Shape Optimization with
Prescribed Movement Directions of Design Variables with Strain
156
Energy Minimization as Objective,” Journal of Structural
Engineering, Vol. 34, No. 6, 2008, pp. 412-420.
108. Sakamoto, H., Takada, S., “Investigation of a Practical Method of
Structural Optimization by Genetic Algorithms”, JSME International
Journal, Series A (Solid Mechanics and Structural Engineering).
Vol.44, No.3, 2001,pp.330-337.
109. Schnack, E., Sporl, U., Iancu, G., “Gradientless Shape Optimization
with FEM”, VDI Forsch.heft 647, 1988, pp. 1 - 44.
110. Scordelis, A.C., “Folded plates for bridges”, Bull. international
association Shell Spatial Structures, Vol.16, No.57, 1974. pp.29-38.
111. Sisodiya, R.G. and Ghali, A., “Analysis of box girder bridges of
arbitrary shape”, IABSEPublication, Vol.32, 1992, pp.203-217.
112. Viswanatha, C.S., “Investigation of distressed bridge pier caps of
parallel bridge located across Musi river adjacent to muslim jung
Bridge, Opposite city college, Hyderabad”, Final report for Chief
Engineer, Greater Hyderabad Municipal
corporation,Hyderabad,A.P.,India,2007.
113. Wuchner, R., Firl, M., Linhard, J., Bletzinger, K.U., “Plateau
regularization method for structural shape optimization and
geometric mesh control”, in: 79th Annual Meeting of the
International Association of Applied Mathematics and Mechanics
GAMM2008, 2008.
114. Yoon Gil Ho1, Matthijs Langelaar, Fred van Keulen, “Topology
157
Optimization for Layered Shell Structures using the Element
Connectivity Parameterization”, International Conference on
Engineering Optimization, ,june,2008
115. Zhou, M., “Optimum design of plates and shells using the DCOC
method”, 1996, Vol. 12,No.2-3, pp.87-92.
116. Zienkiewicz, O. C., "Error estimates and Adaptivity-The essential
ingradients of Engineering FEM Analysis", Proceedings ofsecond
international conference on Quality Assurance and Standards in
Finite Element Analysis, NAFEM,1989,pp.1-5.
117. Zienkiewicz, O. C., and Zhu, J. Z., "A Simple Error Estimator and
Adaptive Procedure for Practical Engineering Analysis",
International Journal for Numerical Methods in Engineering, Vol.
24, 1987,pp. 337-357.
118. Zienkiewicz, O.C. and Campbell, J.S., “Shape optimization and
sequential linear programming”, Optimum Structural Design, 1973.
119. Zolesio, J.P., “Boundary control and variation”, Boundary element
method for shape optimization of linear quadratic elliptical
boundary control problems CRC press,Newyork,1994.
7.2.2 Topology Optimization
120. Ananthasuresh, G.K., Kota S., Kikuchi N., “Strategies for systematic
synthesis of compliant MEMS”, ASME Winter Annual Meeting, DSC-
1994,Vol. 55-2, pp. 677–686.
158
121. Arnout, S., Lombaert, G., Degrande, G., De Roeck, G., “Optimization
as a design tool for shell structures”, IV European conference on
Computational Mechanics, France, May 16-21,2010.
122. Azegami, H. and Kaizu, S., “Smoothing gradient method for non-
parametric shape and topology optimization problems”, in: 7th
World Congress on Structural and Multidisciplinary Optimization
WCSMO, 2007.
123. Beckers, M., “Topology optimization using a dual method with
discrete variables”, 1999,Vol.17, No.1, pp.14 -24.
124. BendsHe, M.P., Kikuchi, N., “Generating optimal topologies in
structural design using a homogenization method”,
Computer Methods and Applications in Mechanical Engineering,
Vol.71, 1988, pp. 197–224.
125. Bendsoe, M.P., Diaz, A.R., Kikuchi, N., "Topology and
Generalizated Layout Optimization of Elastic Structures", Topology
Design of Structures, 1993,pp. 159-206
126. Buhl, T., Pedersen, C.B.W. and Sigmund, O., “Stiffness design of
geometrically nonlinear structures using topology optimization”,
Vol.19, No.2,2000,pp.93 - 104.
127. Buhl,T., “Simultaneous Topology Optimization of Structure and
Supports”, Structural Multidisciplinary Optimization, Vol.23,
2002,pp.336-346.
128. Calafiore, G.C., Dabbene, F., “Optimization under uncertainty with
159
applications to design of truss structures, Structural and
Multidisciplinary Optimization”, Vol. 35, No.3, 2008,pp. 189-200.
129. Chen, T.-Y., Wu, S.C., “Multiobjective optimal topology design of
structures”, Computational Mechanics,Vol. 21,1998,pp.483–494
130. Daeyoon Jung, Hae Chang Gea, “topology optimization of nonlinear
structures”, Finite Elements in Analysis and Design,Vol.40,
,2004,pp.417–1427
131. Diz and Sigmund O. “Checkerboard patterns in layout
optimization”,Vol.10, No.1, 1995pp. 40-45.
132. Du, J. and Olhof,f N., “Topological optimization of continuum
structures with design-dependent surface loading -Part I: new
computational approach for 2D problems”, Vol. 27,No.3, 2004,pp.
151 -165.
133. Duysinx, P., BendsHe, M.P., “Topology optimization of continuum
structures with local stress constraints”, International Journal of
Numerical Methods in Engineering,Vol. 43,1998,pp. 1453–1478.
134. Fleury,C.and Breibant,V., “Structural Optimization: A new dual
method using mixed variables”, International journal of Numerical
method in Engineering,Vo.23,1986,pp.409-428
135. Fujii, D. and Kikuchi, N., “Improvement of numerical instabilities in
topology optimization using the SLP method”, Vol.19, No.2, 2000,
pp. 113 -121.
160
136. Gea, H.C., Fu, Y., “Optimal 3D stiffener design with frequency
considerations”, Advanced Engineering softwares,Vol.28,
,1997,pp.525–531.
137. Ghaemi, M. and Logo, J.,“Iterative Procedure Based Topology
Optimization” in: Finno-Ugric International Conference on
Mechanics. Rackeve, Hungary, 29/May/2005, pp.3-4.
138. Hammer, V.B, and Olhoff, N. , “Topology optimization of continuum
structures subjected to pressure loading”, Vol.19,No.2, 2000, pp.85
-92.
139. Hetrick, J. and Kota, S., “An energy formulation for parametric size
and shape optimization of compliant mechanisms”, ASME Journal
of Mechanical Design, Vol. 121, 1999, pp. 229-234.
140. Hinton, E. and Sienz, J. ,“Fully stressed topological design of
structures using an evolutionary procedure”, Engineering
Computations, Vol. 12,1995, pp. 229-244.
141. Jakiela, M.J., Chapman, C., Duda, J., Adewuya, A. and Saitou, K.,
“Continuum structural topology design with genetic algorithms”,
Computer Methods in Applied Mechanics and Engineering,
Vol.186,No.2-4,2000,pp.339–356
142. Kane, C. and Schoenauer, M., “Topological optimum design using
genetic algorithms”, Control and Cybernetics, Vol.25,No.5, 1996,
pp.1059–1088
161
143. Kharmada, G., Olhoff, N., Mohamed, A., Lemaire, M. , “Reliability-
based Topology Optimization” Structural and Multi-disciplinary
Optimization, Vol.26, 2004, pp.295-307.
144. Kutylowski, R., “On non-unique solutions in topology optimization”,
,Vol. 23, No.5, 2002,pp.398 -403.
145. Logo, J. and Ghaemi, M., “Probabilistic Topology Optimization”.
Proceedings of 16th Inter-Institute Seminar, Wien, May 17-20,
2007,pp. 26.
146. Logo, J., “New Type of Optimal Topologies by Iterative Method”,
Mechanics Based Design of Structures and Machines, Vol.33,No.2,
2005,pp. 149-172.
147. Luo, J., Gea, H.C., “A systematic topology optimization approach for
optimal stiffener design”, Structural Optimization,Vol.16, No. 4,
1998,pp. 280–288.
148. Marti, K., Stockl, G., “Topology and Geometry Optimization under
Stochastic Uncertainty”, In: "Numerical Methods of Uncertainties",
Proceedings EUROMECH 405 Colloquium, P. Level et al. (eds.),
Presses Universitaires Valenciennes,2000,pp.55-63.
149. Maute, K., Ramm, E. “Adaptive topology optimization of shell
structures”, AIAA Journal, Vol.35, 1997,pp.1767-1773
162
150. Maute, K., Schwarz, S., Ramm, E., “Adaptive topology optimization
of elasto plastic structures”, Structural Optimization,Vol.15,1998
pp.81–91.
151. Mohammad Rouhi, Masoud Rais-Rohani and Thomas N. Williams,
“Element exchange method for topology optimization”
, Journal of Structural and Multidisciplinary Optimization ,
Vol. 42, No. 2, pp.215-231
152. Muller.O, Albers,A, Sauter.J, Allinger.P, “ Topology Optimization of
Large Real World Structures”, NAFEMS World Congress , Vol. 2,
1999,pp. 827–839
153. Nishiwaki, S., Frecker, M.I., Min, S., Kikuchi, N., “Topology
optimization of compliant mechanisms using the homogenization
method”, International journal of Numerical Methods in
Engineering, Vol. 42, 1998, pp.535–559.
154. O. Sigmund , P.M. Clausen, “Topology optimization using a mixed
formulation: An alternative way to solve pressure load problems”,
Computer methods in applied Mechanics and engineering,
Vol.196,No.13-16,2007,pp.1874-1889
155. Ohsaki, M., Fujisawa, K., Katoh, N., and Kanno Y., “Semi-definite
programming for topology optimization of trusses under multiple
eigenvalue constraints”, Computer Methods and Applications in
Mechanical Engineering, 1999,Vol.180, pp.203–217.
163
156. Olhoff N., “Optimal design with respect to structural eigenvalues”
,Theoretical and Applied Mechanics, Proc. XVth Int. IUTAM
Congress, pages 133–149. North-Holland, 1980
157. Olhoff, N., BendsHe, M.P., Rasmussen, J. “On CAD-integrated
structural topology and design optimization”. Computer Methods
and Applications in Mechanical Engineering, Vol.89, 1991, pp. 259-
279.
158. Papadrakakis M., Tsompanakis y.,Hinton E.and sienze J.,
“Advanced solution methods in topology optimization and shape
sensitivity Analysis”, Journal of Engineering
Computations,Vol.13,No.5,1996,pp.57-90
159. Paris,J, Mu ,I, Navarrina, F, Colominas,I, Casteleiro M, “A
minimum weight FEM formulation for Structural Topological
Optimization with local stress constraints”, 6th World Congresses of
Structural and Multidisciplinary Optimization, Rio de Janeiro, 30
May - 03 June 2005, Brazil
160. Patnaik, S.N., Guptill, D.J., Berke, L., “Merits and limitations of
optimality criteria method for structural optimization”,
International. Journal of Numerical Methods in Engineering, Vol38,
1995, pp.3087-3120.
161. Pedersen, N.L., “Maximization of eigenvalues using topology
optimization”, Structural Multidisciplinary Optimization, Vol.20
,2000, pp.2–11.
164
162. Pomezanski, V., “Changing the Connections of Structural Elements
During an Optimization Process”, Journal of Computational and
Applied Mechanics, Vol.5, No.1,2004.pp.117–127.
163. Prager,W and Shield,R.T., “A general theory of optimal plastic
design”, Journal of Applied Mechanics,Vol.34,No.l,1967,pp.184-186
164. Rahmatalla, S.F. and Swan, C.C., “ A Q4/Q4 continuum structural
topology optimization implementation, Vol.27, No.1-2,”,
2000,pp.130-135.
165. Rozvany, G.I.N, Mroz, Z, “Column Design: Optimization of Support
Conditions and Segmentation”, Journal of Structural Mechanics,
Vol.5,1997,pp. 279-290.
166. Rozvany, G.I.N., Bendsøe, M., Kirsch, U., “Layout optimization of
structures”, Applied Mechanics Review, Vol. 48, 1995, pp.41–119
167. Sigmund O., “A 99 line topology optimization code written in
Matlab”, Structural Multidisciplinary Optimization, Vol. 21, 2001,
pp.120-127.
168. Sigmund O., “Design of multi physics actuators using topology
optimization-Part I: one-material structures”, Computer Methods
and Applications in Mechanical Engineering,2001,Vol.190,pp.
6577–6604.
169. Sigmund O., “Design of multi-physics actuators using topology
optimization-Part II: two-material structures”, Computer Methods
and Applications in Mechanical Engineering, Vol. 190, 2001,pp.
165
6605–6627.
170. Sigmund O., “On the design of compliant mechanisms using
topology optimization.” Mechanical Structures, Vol. 25, 1997,
pp.495–526
171. Soto,C.A, “Optimal structural topology design for energy absorption:
heuristic approach”, ASME DETC 2001/DAC-21126.
172. Stolpe, M. and Svanberg, K., “An alternative interpolation scheme
for minimum compliance topology optimization”, Structural and
Multidisciplinary Optimization, Vol.22, 2001,pp.116-124
173. Stolpe, M.and Svanberg, K., “Modeling topology optimization
problems as linear mixed 0-1 programs”. International Journal for
Numerical Methods in Engineering, Vol.57, 2003,pp.723-739
174. Suzuki,K., Kikuchi,N., “A homogenization method for shape and
topology optimization”, Computer Methods in Applied Mechanics
and Engineering,Vol.93 ,1991,pp. 291–318.
175. Svanberg K., “The method of Moving Asymptotes a new method for
structural Optimization”, International Journal of Numerical
Methods in Engineering,1987,Vol.24,pp.359-373
176. Tai, K. and Akhtar, S., “Structural Topology Optimization Using a
Genetic Algorithm with a Morphological Geometric Representation
Scheme”, Structural and Multidisciplinary Optimization, 2005, in
press
166
177. Tai, K. and Chee, T.H., “Design of Structures and Compliant
Mechanisms by Evolutionary Optimization of Morphological
Representations of Topology”, ASME Journal of Mechanical Design,
Vol.122,No.4,2000, pp.560–566
178. Tai, K. and Chee, T.H., “Genetic Algorithm With Structural
Morphology Representation for Topology Design Optimization”,
Mechanics in Design – Proceedings of the 2nd International
Conference on Mechanics in Design, 1998, Nottingham, pp.827–836
179. Tenek, Lazarus H., Hagiwara, Ichiro, “Optimal rectangular plate and
shallow shell topologies using thickness distribution or
homogenization”, Computer Methods in Applied Mechanics and
Engineering, Vol. 115, No. 1-2, pp. 111-124
180. Wang, M.Y., Wang, X.M. and Guo, D., “ A level set method for
structural topology optimization”, CMAME - Computer Methods in
Applied Mechanics and Engineering, Vol.192, 2003, pp.227-246.
181. Wang, S.Y. and Tai, K., “Graph Representation for Structural
Topology Optimization Using Genetic Algorithms”, Computers and
Structures, Vol.82,2004,pp.1609–1622
182. Wang, S.Y. and Tai, K., “Structural Topology Design Optimization
Using Genetic Algorithms with a Bit-Array Representation”,
Computer Methods in Applied Mechanics and Engineering, 2005
183. Xianghua Xing, Michael Yu Wang, “Topology Optimization with Level
Set Method Based on Streamline Diffusion Finite Element Method”,
167
8th World Congress on Structural and Multidisciplinary
Optimization, 2009, Lisbon, Portugal
184. Yang R. J., “Stress-based topology optimization”, Structural
Optimization, Vol. 12, 1996, pp.98-105.
185. Yang, R.J. and Chuang, C.H. , “Optimal topology design using linear
programming”, Computers & Structures, Vol. 52, No. 2, 1994,pp.
265-275.
186. Yang, R.J., “Multidiscipline topology optimization”, Computers &
Structures, Vol. 63, No. 6, 1997, pp. 1205-1212.
187. Yang, X.Y., Xie, Y.M., Steven, G.P. and Querin, O.M., “Topology
optimization for frequency using an evolutionary method”, Journal
of Structural Engineering, ASCE, Vol. 125, No. 12,1999, pp. 1432-
1438.
188. YYeehh--LLiiaanngg HHssuu,, MMiinngg--SShhoo HHssuu,, CChhuuaann--TTaanngg CChheenn, “Interpreting
results from topology optimization using density contours”,
CCoommppuutteerrss aanndd SSttrruuccttuurreess,, VVooll.. 7799,, NNoo.. 1100,, 22000011,,pppp.. 11004499--11005588
189. Zhou M. and Rozvany G.I.N., “The COC algorithm, Part II:
Topological, Geometrical and Generalized Shape Optimization”,
Computer Methods in Applied Mechanics and Engineering, Vol.89,
1991, pp.309-336.
190. Zhou, M and Rozvany, G.I.N., “On the validity of ESO type methods
in topology optimization”, Structural and Multidisciplinary
168
Optimization, Vol. 21, 2001, pp. 80-83.
191. Zillober, Ch., “A globally convergent version of the method of
moving asymptotes”, Structural Optimzation, Vol.6, 1993, pp.166-
174.
192. Zillober,Ch., K. Schittkowski and K. Moritzen, “Very large scale
optimization by sequential convex programming “, Optimization
Methods and Software ,Vol.19, No. 1, 2004,pp. 103-120
7.2.3 Integrated Thickness/Shape and Topology Optimization
193. Allaire, G., Kohn, R.V., “Topology optimization and optimal
shape design using homogenization” ,Topology design of
structures,Vol.227,1993,pp.207–218
194. Ansola, R., Canales, J., Tarrago, J.A. and Rasmussen, J.,
“An integrated approach for shape and topology optimization of shell
structures”, Computers and Structures, Vol. 80, No.5-6, 2002, pp.
449-458.
195. Arthit Petchsasithon, Peter Gosling, “ Integrated thickness and
shape optimization of linear shells”,13th ACME conference:
university of Sheffield, 2005
196. Baud, R.V. “Fillet profiles for constant stress”, Product Engineering,
Bd. Vol. 5 ,1934.
197. Baud, R.V.Beiträge zur ,“Kenntnis der Spannungsverteilung in
169
prismatischen und keilförmigen Konstruktionselementen mit
Querschnittsübergängen“, Report 29, Schweiz. Verband für
Metallprüfung in der Technik (Bericht 83 der Eidgen. Mat. Prüf.-
Anstalt), Zürich,1934(7)
198. Bendshe, M.P., and Rodrigues, H.C., “Integrated topology and
boundary shape optimization of 2-D Solid,” Computer Methods in
Applied Mechanics and Engineering, Vol. 87,1991, pp. 15-34.
199. Bremicker, M., Chirehdast, M., Kikuch, N. and Papalambros, P.Y.,
“Integrated topology and structural optimization”, Mechanical
structures and Machines,Vol.19,No.4,1991,pp.551-587
200. Bremicker, M., Chirehdas,t N., Kikuchi, P. Y., Papalambros,
“Integrated Topology and Shape Optimization in Structural Design”,
Mechanics Based Design of Structures and Machines: An
International Journal ,1991,Vol.19,No.4,pp.551-587
201. Cappello, F. and Mancuso, A., “A genetic algorithm for combined
topology and shape optimizations”, Computer-Aided Design,Vol.35
2003,pp.761–769
202. Chyi-Yeu Lin, Yu-Hsin Chou, “Automated structural optimization
system for integrated topology and shape optimization”, Journal of
the Chinese Institute of Engineers ,Volume 31, No. 5, 2008, pp. 745
– 756
203. Kumar, A.V., Gossard, D.C., “Synthesis of optimal shape and
topology of structures”, Journal of Mechanical
170
Engineering,Vol.118,1996,pp. 68–74
204. Lin, C.Y., Chao, L.S., “Automated image interpretation for
integrated topology and shape optimization”, Journal of structural
and multi disciplinary Optimization, Vol.20, 2000,pp.125–137
205. Ma Z.-D. , N. Kikuchi , I. Hagiwara, “Structural topology and shape
optimization for a frequency response problem”, Computational
Mechanics, Vol.13, ,1993, pp.157-174
206. Maute, K., Ramm, E., “Adaptive topology optimization”, Structural
Optimization, Vol.10, 1995, pp. 100- 112.
207. Maute, K., Ramm, E., “General shape optimization - an integrated
model for topology and shape optimization”, Vol.27, 1994, pp.299-
306.
208. Mlejnek, H.P. and Schirrmacher, R., "An Engineer's Approach to
Optimal Material Distribution and Shape Finding", Computer
Methods in Applied Mechanics and Engineering, Vol. 106, 1993,pp.
1-26
209. Neuber, H., “Zur Optimierung der spannungskonzentration“,
Journal of Continuum Mechanics and Related Problems of Analysis,
Moskau, Nauka ,1972, pp. 375-380
210. Nima Bakhtiary, Peter Allinger, Matthias Friedrich, Fritz Mulfinger,
Jurgen Sauter, “A New Approach for Sizing, Shape and Topology
Optimization”, 1996 SAE International Congress and Exposition
Detroit, Michigan USA, February 26-29
171
211. Olhoff, N., Bendshe, M.P, Rasmussen, J., “On CAD-Integrated
structural topology and design optimization”, Methods of applied
mechanical engineering journal,Vo.89, ,pp.259-279
212. Schnack, E.,“Optimierung von Spannungskonzentrationen bei
Viellastbeanspruchung“ , ZAMM Bd. 60,1980, pp. 151-152
213. Tang, P.S., Chang, K.H., “Integration of topology and shape
optimization for design of structural components”, Journal of
structural and multi disciplinary Optimization,Vol.22, 2001,pp.65–
82
214. Yildiz, A.R., Ozturk, N., Kaya N. and Ozturk F., “Integrated optimal
topology design and shape optimization using neural networks”,
Journal of structural and multi disciplinary Optimization ,Vol.25,
,2003,pp.251–260
215. Zhou,M., Pagaldipti,N., Thomas,H.L., Shyy,Y.K., “An integrated
approach to topology, sizing, and shape optimization”, Structural
Multidisciplinary Optimization, Vol. 26,2004,pp.308–317
7.3 Master’s/Ph.D. Thesis
216. Belblidia, F., “Fully integrated design optimization for plate
structures,” Ph.D. thesis, No. C/Ph/231/99, Department of Civil
Engineering, University of Wales, Swansea, 1999.
217. Ghoddosian, A., “Improved zero-order techniques for structural
shape optimization using FEM”, Ph.D.Thesis, Applied Mechanics
172
Department, Indian Institute of Delhi,1998
218. Kidsgaard, S., “Analysis and optimization of finite element
discretized structures,” Ph.D. thesis, Institute of Mechanical
Engineering, Aalborg University, 1991.
219. Mohsen Ghaemi, “Topology optimization problems using
optimality criteria methods”, Ph.D. thesis, Budapest University of
Technology and Economics, Faculty of Civil
Engineering,Department of structural Mechanics, Budapest, 2009
220. Ozakca, M., “Analysis and optimal design of structures with
adaptivity,” Ph.D. thesis, No. C/Ph/168/93, Department of Civil
Engineering, University College of Swansea, Swansea, 1993.
221. Roopesh kumar Dhondy, “Single, Bi and Multi-objective
structural Shape optimization”, Ph.D. thesis, Department of Civil
Engineering, Jawaharlal technological University, Hyderabad,
A.P., India
222. Roozen-Kroon,P.J.M, “Structural optimization of bells”, Ph.D
thesis, Technical university of Eindhoven, Eindhoven,1992
223. Seinz, J., “Integrated structural modelling, adaptive analysis, and
shape optimization,” Ph.D. thesis, No. C/Ph/181/94, Department
of Civil Engineering, University College of Swansea, Swansea,
1994.
224. Sporl,U.,“Spannungsoptimale Auslegung elastischer
Strukturen“,Dissertation Universitat Karlsruhe, 1985.
173
225. Wang, Y., “ A Study on Microstructures of Homogenization for
Topology Optimization”, Ph.D. thesis ,School of Architectural, Civil
and Mechanical Engineering, Victoria University of Technology
Melbourne, Australia ,October, 2003
7.4 Text books
226. Allaire, G., “Shape optimization by the homogenization method”,
Applied Mathematical Sciences 146, Springer Verlag ,2002
227. ANSYS 9.0, SAS IP, Inc., 2004, “ANSYS 9.0 Release
Documentation.”
228. Arora, J.S., “Guide to structural optimization” Number 90 in
ASCE Manuals and reports on engineering practice. ASCE, New
York, 1997.
229. Atrek, E., Gallagher R.H., Ragsdell K.M. and Zienkiewicz O.C.,
“New directions in optimum structural design,”John Wiley,
Chichester, 1984.
230. Bathe, K.J., “Finite Element Procedures”, Prentice-Hall,
Englewood Clins, NJ, 1996
231. Belegundu, A.D. and Chandrupatla T.R., “Optimization concepts
and applications in engineering,” Pearson Education, Delhi, 2002.
232. Bendshe,M.P., “Optimization of Structural Topology, Shape and
Material”,1995,Springer-Verlag,Berlin.
174
233. Bendsoe, M. P., Sigmund O. (2003), Topology Optimization:
Theory, Methods and Applications, Springer Verlag, Berlin
234. Bennet, J.A., Botkin, M.E. , “The optimum shape - automated
structural design”, New York: Plenum Press, 1986.
235. Cheung, Y.K, “Finite Strip Method in Structural Analysis”,
Pergamon Press, Sydney, 1976
236. David E. Goldberg, “Genetic algorithms in search, Optimization
and machine learning”, ADDISON-Wesley Publishing
Company,Massachusetts,1989.
237. Gajewski, A. and Zyczkowski, M, “Optimal structural design
under stability constraints”, Kluwer Academic Publishers, The
Netherlands,1998
238. Leissa, A. W., “Vibration of Shells”, 1973, NASA SP – 288,
Government Printing Office, Washington, DC.
239. Qatu, M.S., “Vibration of Laminated Shells and Plates”,2004,
Elsevier.
240. Ramaswamy, G.S., “Design and construction of concrete shell
roofs”. Krieger Publications, 1984
241. Rao, S.S., “Engineering optimization: Theory and practice,” New
Age International, New Delhi, 2003.
242. Rozvany, G.I.N., “Topology Optimization in Structural Mechanics”,
1997,Springer-Verlag Wien, Newyork.
243. Soedel, W., “Vibration of Shells and Plates”, Marcel Dekker, New
175
York,1993
244. Zienkiewicz, O.C. and Campbell, J.S., “Shape optimization and
sequential linear programming”, Optimum structural design,
(Edited by Gallagher R. H. and Zienkiewicz O.C.), John Wiley, New
York, 1973.
245. Zolesio, J.P., “Boundary control and variation, Boundary element
method for shape optimization of linear quadratic elliptic
boundary Control problems”, CRC Press, Marcel
Dekker,Newyaok,1994.