References
[1] F. A. Al-Sulaiman, “Mechanical Properties of Date Palm Fiber Reinforced
Composites,” Appl. Comp. Maters. Int., vol. 9, pp. 369 - 3777, 2002.
[2] J. Bhaskar and V. K. Singh, “Physical and Mechanical Properties of Coconut
Shell Reinforced-Epoxy Composite,” J. Mater. Environ. Sci., vol. 4, no. 2, pp.
227-232, 2013.
[3] B. D. Agarwal and L.J. Broutman, “Analysis and performance of fiber
composites,” John Wiley & Sons, New York, pp.3-12, 1980.
[4] D. N. Saheb and J. P. Jog, “Natural Fiber Polymer Composites: A
Review,”Adv. Polym. Technol., vol. 18, no. 4, pp. 351–363, 1999.
[5] Z. Li, H. Gao and Q. Wang, “Preparation of highly filled wood flour/recycled
high density polyethylene composites by in situ reactive extrusion,” J. Appl.
Polym. Sci., vol. 124, no. 6, pp. 5247–5253, 2012.
[6] G. Keledi, A. Sudar, C. Burgstaller, K. Renner, J. Moczo and B. Pukanszky,
“Tensile and impact properties of three-component PP/wood/elastomer
composites,” Express. Polym. Lett., vol. 6, no. 3, pp. 224 – 236,2012.
[7] R. M. Rowell, “Natural fibers, types and properties,” in Properties and
performance of natural-fiber composite , Ed. ed Cambridge, Woodhead
Publishing Limited, 2008.
[8] M. U. Wahit, N. I. Akos and W. A. Laftah, “Influence of Natural Fibers on the
Mechanical Properties and Biodegradation of Poly(lactic acid) and Poly(e-
caprolactone) Composites, A Review,” Polym. Comp., vol. 33, pp. 1045-1053,
2012.
176 references
[9] K. Holmberg, P. Andersson and A. Erdemir, “Global energy consumption due
to friction in passenger cars,” Tribol. Int., vol.47, pp. 221–234,2012.
[10] G. Fontaras and Z. Samaras, “On thewayto130gCO2/km – Estimating the
future characteristics of the average European passenger car,” Ener. Polic., vol.
38, no. 4, pp. 1826 –1833, 2010.
[11] R. Karnani, M. Krishnan, R. Narayan, “Biofiber-reinforced polypropylene
composites,” Polym. Eng. Sci., vol. 37, pp. 476–483, 1997.
[12] J. George, M. S. Sreekala and S. A. Thomas, “Review on interface
modification and characterization of natural fiber reinforced plastic
composites,” Polym. Eng. Sci., vol. 41, pp. 1471–1485, 2001.
[13] A. K. Bledzki and J. Gassan, “Composites reinforced with cellulose based
fibres,” Prog. Polym. Sci., vol. 24, pp. 221-274, 1999.
[14] M. M. Thwe and K. Liao, “Effects of environmental aging on the mechanical
properties of bamboo-glass fiber reinforced polymer matrix hybrid
composites,” Compos. Part A:pp. 33, pp. 43-52, 2002.
[15] H. S. Kim, H. S. Yang, H. J. Kim and H. J. Park, “Thermogravimetric analysis
of rice husk flour filled thermoplastic polymer composites,” J. Ther. Analy.
Calorim., pp. 76, pp. 395-404, 2004.
[16] P. E. Imoisili, B. A. Olunlade and W. B. Tomori, “Effect of Silane Coupling
Agent on the Tensile Properties of Rice Husk Flour (RHF) Polyester
Composite,” Pacific J. Sci. Technol., vol. 13, no. 1, pp. 457-462, 2012.
[17] A. Ashori, “Wood-plastic composites as promising green composites for
automotive industries!,” Bio-res. Technol., vol. 99, no. 11, pp. 4661–4667,
2008.
177 references
[18] A. K. Mohanty, M. Misra and L. T. Drzal, “Sustainable bio-composites from
renewable resources: opportunities and challenges in the green materials
world,” J. Polym. Environ., vol. 10, pp. 19–26, 2002.
[19] A. K. Mohanty, A. Wibowo, M. Misra and L. T. Drzal, “Effect of process
engineering on the performance of natural fiber reinforced cellulose acetate
biocomposites,” Compos. Part A: vol.35, pp. 363-370, 2004.
[20] P. J. Roe and M. P. Ansel, “Jute reinforced polyester composites,” J. Mater.
Sci., vol, 20, pp. 4015-4020, 1985.
[21] X. Lua, M. Z. Qiu, M. R. Zhi, G. Shia and G. Y. Cheng, Selfreinforced melt
processable composites of sisal,” Compos. Sci. Technol., vol. 63, pp. 177–186,
2003.
[22] M. Baiardo, E. Zini and M. Scandola, “Flax fibre – polyester composites,”
Compos. Part A: vol. 35, pp. 703–710, 2004.
[23] A. P. Mathew, K.Oksman and S. Mohini, “Mechanical properties of
biodegradable composites from poly lactic acid (PLA) and microcrystalline
cellulose (MCC),” J. Appl. Polym. Sci., vol. 97, pp. 2014-2025, 2005.
[24] A. Valadez-Gonzales, J. M. Cetvantes-UcR. Olayo, and P. J. Herrera Franco,
“Effect of fibre surface treatment on the fibre-matrix bond strength of natural
fiber reinforced composite,” Compos. Part B: vol. 3, pp. 309-320, 1999.
[25] X. Li, L. G. Tabil, S. Panigrahi and W. J. Crerar, “The Influence of Fiber
Content on Properties of Injection Molded Flax Fiber-HDPE Biocomposites,”
Canadian Bio-syst. Eng., vol. 08-148, pp. 1-10, 2009.
[26] A. S. Singha, A. Shama and V. K. Thakur, “X-Ray Diffraction, Morphological
and Thermal Studies on Methylmethacrylate Graft Copolymerized Saccharum
Cilliari Fiber,” Int. J. Polym. Anal. Charact., vol. 13, pp. 447-462, 2008.
178 references
[27] A. S. Singha and V. K.Thakur, “Saccaharum CilliareFiber Reinforced Polymer
Composites,” E-J. Chem., vol. 5, pp. 782-791, 2008.
[28] A. S.Singha and V. K.Thakur, “Effect of Fiber Loading on Properties of Urea –
Formaldehyde matrix Based Green Composites,”Iran. Polym. J., vol. 17, pp.
861-873, 2008.
[29] A. S. Singha and V. K. Thakur, “Mechanical properties of Natural Fiber
reinforced Polymer Composites,”Bull. Mater. Sci., vol. 31, pp. 991-999, 2008.
[30] A. S. Singha and V. K. Thakur, “Fabrication and study of
Lignocellulosic Hibiscus Sabdariffa Fiber Reinfirced Polymer
Composites,”Bio-Res., vol. 3, pp. 1173-1186, 2008.
[31] A. S. Singha and V. K. Thakur, “Study of Mechanical properties of Urea-
Formaldehyde Thermosets Reinforced by Pine Needle Powder,”Bio-Res., vol.
4, pp. 292-308, 2009.
[32] S. Sapieha, P. Allard and Y. H. Zang, “Dicumyl peroxide-modified
cellulose/LLDPE composites,” J. Appl. Polym. Sci., vol. 41, pp. 2039-2048,
1990.
[33] D. Ray, B. K. Sarkar, A. K. Rana and N. R. Bose, “Effect of alkali treated jute
fibers on composite properties,”Bull. Mater. Sci., vol. 24, pp. 129-135, 2001.
[34] A. Bessadok, S. Roudesli, S. Marais, N. Follain and L. Lebrun, “Alfa fibres for
unsaturated polyester composites reinforcement: Effects of chemical treatments
on mechanical and permeation properties,” Comp. Part A: vol. 40, pp. 184 –
195, 2009.
[35] K. M. M. Rao, K. M. Rao and A.V. R. Prasad, “Fabrication and testing of
natural fibre composites: Vakka, sisal, bamboo and banana,” Mater. Des., vol.
31, pp. 508 – 513, 2010.
179 references
[36] K. C. C. Carvalho, D. R. Mulinari, H. J. C. Voorwald and M. O. H. Cioffi,
“Chemical modification effect on the mechanical properties of HIPS/coconut
fiber composites,” Bio-Res., vol. 5, no. 2, pp. 1143-1155, 2010.
[37] V. Vilay, M. Mariatti, R. M. Taib and M. Todo, “Effect of fiber surface
treatment and fiber loading on the properties of bagasse fiber – reinforced
unsaturated polyester composites,” Comp. Sci. and Technol., vol. 68, pp. 631–
638, 2008.
[38] P. Threepopnatkul, N. Kaerkitcha and N. Athipongarporn, “Effect of surface
treatment on performance of pineapple leaf fiber – polycarbonate composites,”
Comp. Part B: vol. 40, pp. 628 – 632, 2009.
[39] M. Jacoba, S. Thomasa and K. T. Varughese, “Mechanical properties of
sisal/oil palm hybrid fiber reinforced natural rubber composites,” Comp. Sci.
Technol., vol. 64, pp. 955 – 965, 2004.
[40] M. Jawaid and H. P. S. A. Khalil, “Effect of layering pattern on the dynamic
mechanical properties and thermal degradation of oil palm-jute fibers
reinforced epoxy hybrid composite,” Bio-Res., vol. 6, no. 3, pp. 2309 - 2322,
2011.
[41] P. K. Sahoo, S. K. Swain and N. L. Debsarkar, “Preparation, Characterization,
and Properties of Unbleached, Bleached, and Grafted Pulps from JRC-
321Variety Jute Fiber,” J. Appl. Polym. Sci., vol. 83, pp. 1963 – 1969, 2002.
[42] K. Charlet, J. P. Jernot, S. Eve, M. Gomina and J. Bréard, “Multi-scale
morphological characterisation of flax: From the stem to the fibrils,” Carbohyr.
Polym., vol. 82, pp. 54 – 61, 2012.
[43] M. A. N. Izani, et al., “Effects of fiber treatment on morphology, tensile and
thermogravimetric analysis of oil palm empty fruit bunches fibers,” Comp. Part
B: vol. 45, no. 1, pp. 1251 – 1257, 2013.
180 references
[44] F. A. Camargo, et al., “Processing and characterization of composites of poly
(3-hydroxybutyrate-co-hydroxyvalerate) and lignin from sugar cane bagasse,”
J. Comp. Mater., vol. 46, no. 4, pp. 417 – 425, 2012.
[45] N. Venkateshwaran, A. E. Perumal, D. Arunsundaranayagam, “Fiber surface
treatment and its effect on mechanical and visco-elastic behaviour of
banana/epoxy composite,” Mater. Des., vol. 47, pp. 151 – 159, 2013.
[46] B. Prasad and M. Sain, “Mechanical properties of thermally treated hemp
fibers in inert atmosphere for potential composite reinforcement,” Mater. Res.
Innov., vol. 7, no. 4, pp. 231 – 238, 2003.
[47] C. S. Verma, N. K. Sharma, V. M. Chariar, S. Maheshwari and M. K. Hada,
“Comparative study of mechanical properties of bamboo laminae and their
laminates with woods and wood based composites,” Comp. Part B: vol. 60, pp.
523 – 530, 2014.
[48] A. S. Virk, W. Hall and J. Summerscales, “Failure strain as the key design
criterion for fracture of natural fibre composites,” Comp. Sci. Technol., vol. 70,
no. 6, pp. 995 – 999, 2010.
[49] B. F. Yousif, H. Ku, “Suitability of using coir fiber/polymeric composite for
the design of liquid storage tanks,” Mater. Des., vol. 36, pp. 847 – 853, 2012.
[50] G. M. A. Khan, et al., “Influence of chemical treatment on the properties of
banana stem fiber and banana stem fiber/coir hybrid fiber reinforced maleic
anhydride grafted polypropylene/low-density polyethylene composites,” J.
Appl. Polym. Sci., vol. 128, no. 2, pp. 1020–1029, 2013.
[51] S. Shinoj, et al., “Oil palm fiber (OPF) and its composites: a review,” Ind.
Crops. Prod., vol. 33, no. 1, pp. 7–22, 2011.
179 references
[52] G. Kalaprasad, G. Mathew, C. Pavithran, and S. Thomas, “Melt rheological
behavior of intimately mixed short sisal-glass hybrid fiber-reinforced low-
density polyethylene
composites. I. Untreated fibers,” J. Appl. Polym. Sci., vol. 89, no. 2, pp. 432 –
442, 2003.
[53] S. C. Mishra, “Low cost polymer composites with rural resources,” J. Rein.
Plast. Comp., vol. 28, no. 18, pp. 2183 – 2188, 2009.
[54] S. K. Acharya and S. C. Mishra, “Weathering behaviour of flyash jute polymer
composite,” Journal of Reinforced Plastics and Composites, vol. 26, no. 12, pp.
1201 –1210, 2007.
[55] G. Kalaprasad, B. Francis and S. Thomas et al., “Effect of fibre length and
chemical modifications on the tensile properties of intimately mixed short
sisal/glass hybrid fibre reinforced low density polyethylene composites,”
Polym. Int., vol. 53, no. 11, pp. 1624 –1638, 2004.
[56] S. Varghese, B. Kuriakose, and S. Thomas, “Stress relaxation in short sisal-
fiber-reinforced natural rubber composites,” J. Appl. Polym. Sci., vol. 53, no.
8, pp. 1051 – 1060, 1994.
[57] Y. Mi, X. Chen, and Q. Guo, “Bamboo fiber-reinforced polypropylene
composites: crystallization and interfacial morphology,” J. Appl. Polym. Sci.,
vol. 64, no. 7, pp. 1267 – 1273, 1997.
[58] F. M. B. Coutinho, T. H. S. Costa, and D. L. Carvalho, “Polypropylene-wood
fiber composites: effect of treatment and mixing conditions on mechanical
properties,” J. Appl. Polym. Sci., vol. 65, no. 6, pp. 1227 – 1235, 1997.
[59] H. K. Mishra and S. C. Mishra, “Erosion wear behaviour of coir dust
reinforced polymercomposite,” Orissa J. Phy., vol. 18, no. 1, pp. 97–108, 2011.
180 references
[60] L. A. Pothan, S. Thomas, and N. R. Neelakantan, “Short banana fiber
reinforced polyester composites: mechanical, failure and aging characteristics,”
J. Rein. Plast. Comp., vol. 16, no. 8, pp. 744 – 765, 1997.
[61] N. Sombatsompop, K. Chaochanchaikul, C. Phromchirasuk, and S. Thongsang,
“Effect of wood sawdust content on rheological and structural changes, and
thermo-mechanical properties of PVC/sawdust composites,” Polym. Int., vol.
52, no. 12, pp. 1847 – 1855, 2003.
[62] H. Djidjelli, J. J. Martinez-Vega, J. Farenc, and D. Benachour, “Effect of wood
flour content on the thermal, mechanical and dielectric properties of poly(vinyl
chloride),” Macro-molecu. Mater. Eng., vol. 287, no. 9, pp. 611 – 618, 2002.
[63] H. Djidjelli, M. Kaci, J. J. Martinez-Vega, and D. Benachour, “Effects of
hydrothermal ageing on the thermal behaviour of poly (vinyl chloride) filled
with wood flour,” Polym.Int., vol. 53, no. 11, pp. 1760 –1765, 2004.
[64] M. S. Sreekala, M. G. Kumaran, S. Joseph, M. Jacob, and S. Thomas, “Oil
palm fibre reinforced phenol formaldehyde composites: influence of fibre
surface modifications on the mechanical performance,” Appl. Comp. Mater.,
vol. 7, no. 5-6, pp. 295–329, 2000.
[65] M. Idicula, S. K. Malhotra, K. Joseph, and S. Thomas, “Effect of layering
pattern on dynamic mechanical properties of randomly oriented short
banana/sisal hybrid fiber-reinforced polyester composites,” J. Appl. Polym.
Sci., vol. 97, no. 5, pp. 2168–2174, 2005.
[66] M. Tasdemir, H. Biltekin and G. T. Caneba, “Investigation of properties of PE
& PP / Wood flour polymer composites,” J. Appl. Polym. Sci., vol. 112, pp.
3095 - 3102, 2009.
[67] V. R. Botaro, E. Frollini and G. Siqueira, “Sisal fibers treated with NaOH and
181 references
Benzophenonetetra carboxylic di-anhydride as reinforcement of phenolic
matrix,” J. Appl. Polym. Sci., vol, 115, pp. 269 - 276, 2010.
[68] C. Qin, N. Soykeabkaew, N. Xiuyuan and T. Peijis, “The effect of fiber volume
fraction and mercerization on the properties of all-cellulose composites,”
Carbohydr. Polym., vol. 71, pp. 458 - 467, 2008.
[69] C. K. Hong, I. Hwang, N. Kim, D. H. Park, B. S. Hwang and C. Nah,
“Mechanical properties of silanized jute polypropylene composites,”J. Ind.
Eng. Chem., vol. 14, pp. 71-76, 2008.
[70] X. Huang and A. Netavali, “Biodegradable green composites made using
bamboo micro/nano-fibrils and chemically modified soy protein resin,”
Compos. Sci. Technol., vol. 69, pp. 1009 - 1015, 2009.
[71] H. M. Akil, L.W. Cheng, Z. A. M. Ishak, A.A. Bakar, and M. A. A. Rahman,
“Water absorption study on pultruded jute fiber reinforced unsaturated polyster
composites,” Compos. Sci. Technol., vol. 69, pp. 1942 - 1948, 2009.
[72] K. Adekunle, S-W. Cho, C. Patzelt, et al., “Impact and flexural properties of
flax fabrics and lyocell fiber-reinforced bio-based thermoset,” J. Rein. Plast.
Comp., vol. 30, no. 8, pp. 685 – 697, 2011.
[73] M. Thiruchitrambalam, A. Alavudeen and N. Venkateshwaran.“Review on
kenaf fiber composites,” Rev. Adv. Mater. Sci., vol. 32, pp. 106 - 112, 2012.
[74] J. P.Dhal and S. C. Mishra, “Processing and Properties of Natural Fiber-
Reinforced Polymer Composite,” J. Mater., vol. 2013, 10.1155/2013/297213,
pp. 1- 6, 2013.
[75] L. Yu, K. Dean and L. Li, Polymer blends and composites from renewable
resources,” Prog. Polym. Sci., vol. 31, pp. 576 – 602, 2006.
182 references
[76] H, Ku, H, Wang, N. Pattarachaiyakoop and M. Trada, “A review on the tensile
properties of natural fiber reinforced polymer composites,” Comp. Part B: vol.
42, pp. 856 – 873, 2011.
[77] M. Avella, A. Buzarovska, M. E. Errico, G. Gentile and A. Grozdanov, “Eco-
challenges of bio-based polymer composites,” Mater., vol. 2, pp. 911 – 925,
2009.
[78] J. Holbery and D. Houston, “Natural fiber-reinforced polymer composites in
automotive Applications,” J. Min. Met. Mater. Soc., vol. 58, pp. 80 – 86, 2006.
[79] K. Begum and M. A. Islam, “Natural Fiber as a substitute to Synthetic Fiber in
Polymer Composites: A Review,” Res. J. Eng. Sci., vol. 2, no, 3, pp. 46 - 53,
April 2013.
[80] P. Wambua, J. Ivens, and I. Verpoest, “Natural Fibres: Can They Replace
Glass in Fibre Reinforced Plastics,” Comp. Sci. Technol., vol. 63, pp.1259 -
1264, 2003.
[81] S. K. Chattopadhyay, R. K. Khandal, U.Ramagopal and A. K. Ghoshal,
“Mechanical, thermal,and morphological properties of maleic anhydride-g-
polypropylene pompatibilized and chemically modified banana-fiber-
reinforced polypropylene composites,” J. Appl. Polym. Sci., vol. 117, pp. 1731
- 1740, 2010.
[82] J. B. Naik and S. Mishra, “Esterification effect of maleic anhydride on swelling
properties of natural fiber/high density polyethylene composites,” J. Appl.
Polym. Sci., vol. 106, pp. 2571-2574, 2007.
[83] C. A. S. Hill and H. P. S. Abdul Khalil, “Effect of fiber treatments on
mechanical properties of coir or oil palm fiber reinforced polyester
composites,” J. Appl. Polym. Sci., vol. 78, pp. 1685 - 1697, 2000.
183 references
[84] R. A. Gross and B. Karla, “Biodegradable polymers for the environment,” Sci.,
vol. 297, pp. 1803–1807, 2002.
[85] D. Jagadeesh, D. Jeevan Pradsad Reddy, A. Varada Rajulu and R. Li, “Green
composites from wheat protein isolate and Hildegardia populifolia natural
fabric,” Polym. Comp., vol. 32, pp. 398 - 406, 2011.
[86] J. T.Kang and S. H.Kim, “Improvement in the mechanical properties of
polylactide and bamboo fiber biocomposites by fiber surface
modification,”Macromol. Res., vol. 19, pp. 789 - 796, 2011.
[87] C. Venkata Prasad, K. Chowdoji Rao, G. Venkata Reddy, T. Sobha Rani, B.
Yerriswamy and M. C. S.Subha, “Characteristic Studies of Ligno-Cellulosic
Fabric Grewia tenax,”J. Nat. Fibers,vol. 7, pp. 194 - 215, 2010.
[88] A. Merlin, T. Hale, K. Sebnem, A. Ayse and O. Guralp, “Effects of Alkali
Treatment on the Properties of Short Flax Fiber–Poly (Lactic Acid) Eco-
Composites,” J. Polym. Environ., vol. 19, pp. 11 - 17, 2011.
[89] K. Jayaraman, “Manufacturing sisal-polypropylene composites with minimum
fiber Degradation,” Comp. Sci. Technol., vol. 63, pp. 367 - 374, 2003.
[90] M. Z. Rong, M. Q. Zhang, Y, Liu, G. C. Yang and H. M. Zeng, “The effect of
treatment on the mechanical properties of unidirectional sisal-reinforced epoxy
composites,” Comp. Sci. Technol., vol. 61, pp. 1437 - 1447, 2001.
[91] M. J. John and R. D. Anandjiwala, “Recent Developments in Chemical
Modification and Characterization of Natural Fiber-Reinforced Composites,”
Polym. Comp., vol. 29, no. 2, pp. 187 - 207, 2008.
[92] C. H. Haigler, “The Functions and Biogenesis of Native Cellulose. Cellulose
Chemistry and Its Applications,” In Cellulose Chemistry and its Applications,
184 references
S. H. Zeronian and T. P. Nevell, eds., Ellis Horwood: Chichester, England, pp.
30 - 83, 1985.
[93] C. Navin and F. Mohammed, “Tribology of Natural Fiber Polymer
Composites,” CRC Press, Boca Raton, F L, 205 (2008).
[94] C. Morvan, A. Jauneau, A. Flaman, J. Millet, M. Demarty, “Degradation of
flax polysaccharides with purified endo-polygalacturonase,” Carbohyd.
Polym., vol. 13, pp. 139 - 163,1990.
[95] B. Madsen, “Properties of plant fiber yarn polymer composites – An
experimental study,” Ph. D Thesis, Department of civil Engineering, Technical
University of Denmark, 2004.
[96] A. Valadez-Gonzales, J. M. Cetvantes-Uc, R. Olayo and P. J. Herrera Franco,
“Effect of fibre surface treatment on the fibre-matrix bond strength of natural
fibre reinforced
composites,” Comp. Part B: vol. 30, no. 3, pp. 309 - 320, 1999.
[97] R. C. Raj and B. V. Kokta, “Compounding of cellulose fibers with
polypropylene: Effect of fiber treatment on dispersion in the polymer matrix,”
J. Appl. Polym. Sci., vol. 38, pp. 1987 - 1996, 1989.
[98] M. Kazayawoko, J. J. Balatinecz and L.M. Matuana, “Surface modification and
adhesion mechanisms in wood fiber-polypropylene composites,” J. Mater. Sci.,
vol. 34, pp. 6189 - 6199, 1999.
[99] B. F. Yousif, et al., “Flexural properties of treated and untreated kenaf/epoxy
composites,” Mater. Des., vol. 40, pp. 378 – 385, 2012.
[100] K. G. Satyanarayana, K. K. Ravikumar, K. Sukumaran, P.S. Mukherjee, S.G.K.
Pillai, and A.K. Kulkarni, J. Mater. Sci., 21, 57 (1986)
185 references
[101] M. Thiruchitrambalam, A. Alavudeen, A. Athijayamani, N. Venkateshwaran,
and A. E. Perumal, “Improving mechanical properties of banana/kenaf
polyester hybrid composites using sodium laulryl sulfate treatment,” Mater.
Phys. Mech., vol. 8, pp. 165 - 173, 2009.
[102] A. V. Ratan Prasad, K. M. Rao, and G. Nagasrinivasulu, “Mechanical
properties of banana empty fruit bunch fibre reinforced polyester composites,”
Ind. J. Fiber Text. Res., vol. 34, pp. 162 - 167, 2009.
[103] A. M. M. Edeerozey and H. Md. Akil, “Chemical modification of kenaf
fibers,” Mater. Lett., vol. 61, pp. 2023 - 2025, 2007.
[104] L. Yan, N. Chouw and X. Yuan, “Improving the mechanical properties of
natural fiber fabric reinforced epoxy composites by alkali treatment,” J. Reinf.
Plast. Comp., vol. 31, pp. 425 – 437, 2012.
[105] M. Scandola, G. Frisoni, and M. Baiardo, „„Chemically Modified Cellulosic
Reinforcements,‟‟ in Book of Abstracts 219th
ACS National Meeting,
Washington, D.C., American Chemical Society, pp. 26, 2000.
[106] A. Valadez-Gonzalez, J. M. Cervantes-Uc, R. Olayo and P. J. Herrera-Franco,
Chemical modification of henequen fibers with an organosilane coupling
agent,” Comp. Part B: vol. 30, no. 3, pp. 321 - 331, 1999.
[107] S. Kalia, B. S. Kaith and I. Kaur, “Pretreatments of natural fibers and their
application as reinforcing material in polymer composites–A review,” Polym.
Engg. Sci., vol. 49, pp. 1253 – 1272, 2009.
[108] S. Mishra, M. Misra, S. S. Tripathy, S. K. Nayak and A. K. Mohanty,
“Graftcopolymerization of acrylonitrile on chemically modified sisal fibers,”
Macromol. Mater. Eng., vol. 286, no. 2, pp. 107 – 113, 2001.
186 references
[109] A. Shalwan and B. F. Yousif, “Investigation on interfacial adhesion of date
palm/epoxy using fragmentation technique,” Mater. Des., vol. 53, pp. 928 –
937, 2014.
[110] I. van de Weyenberg, J. Ivens, A. De Coster, B. Kino, E. Baetens and I.
Verpoest, “Influence of processing and chemical treatment of flax fibers and
their composites,” Comp. Sci. Technol., vol. 63, no. 9, pp. 1241 - 1246, 2003.
[111] C. K. Hong, I. Hwang, N. Kim, D. H. Park, B. S. Hwang and C. Nah,
“Mechanical properties of silanized jute-polypropylene composites,” J. Ind.
Eng. Chem., vol. 14, pp. 71 - 76, 2008.
[112] A. Bessadok, S. Marais, S. Roudesli, C. Lixon and M. Metayer, “Influence of
chemical modifications on water-sorption and mechanical properties of Agave
fibers,” Comp. Part A: vol. 39, pp. 29 - 45, 2008.
[113] Y. Li, C.Hu and Y. Yu, “Interfacial studies of sisal fiber reinforced high
density polyethylene (HDPE) composites,” Comp. Part A: vol. 39, pp. 570 -
578, 2008.
[114] R. S. Santos, A. A. Souza, M. A. De Paoli, and C. M. L. Souza, “Cardanol-
formaldehyde thermoset composites reinforced with buriti fibers: Preparation
and characterization,” Comp. Part A: vol. 41, pp. 1123 - 1129, 2010.
[115] J. D. Jr. Megiatto, E. C. Ramires and E. Frollini, “Phenolic matrices and sisal
fibers modified with hydroxy terminated polybutadiene rubber: Impact
strength, water absorption, and morphological aspects of thermosets and
composites,” Indust. Crops. Products, vol. 31, pp. 178 - 184, 2010.
187 references
[116] H. Ku, H. Wang, N. Pattarachaiyakoop, M. Trada, “A review on the tensile
properties of natural fiber reinforced polymer composites,” Comp. Part B: vol.
42, 856 - 873, 2011.
[117] A. K. Mohanty, M, Misra, L. T. Drzal, “Surface modifications of natural fibers
and performances of the resulting biocomposites: An overview,” Comp.
Interfaces, vol. 8, no. 5, pp. 313 - 343, 2001.
[118] D. G. Hepworth, J. F. V. Vincent, G. Jeronimidis and D. M. Bruce, “The
penetration of epoxy resin into plant fibre cell walls increases the stiffness of
plant fibre composites,” Comp. Part A: vol. 31, pp. 599 – 601, 2000.
[119] A. Alawar, M. A. Hamid and A. Kaabi, “Characterization of treated date palm
tree fiber as composite reinforcement,” Comp. Part B: vol. 40, pp. 601 – 606,
2009.
[120] M. F. Rosa, B. S. Chiou, E. S. Medeiros, D. F. Wood, T. G. Williams and L. H.
C. Mattoso, “Effect of fiber treatments on tensile and thermal properties of
starch/ethylene vinyl alcohol copolymers/coir biocomposites,” Biores.
Technol., vol. 100, pp. 5196 – 202, 2009.
[121] A. Duval, A. Bourmaud, L. Augier and C. Baley, “Influence of the sampling
area of the stem on the mechanical properties of hemp fibers,” Mater. Lett.,
vol. 65, pp. 797 –800, 2011.
[122] M. Rokbi, H. Osmani, A. Imad and N. Benseddiq, “Effect of chemical
treatment on flexure properties of natural fiber-reinforced polyester
composite,” Proc. Eng., vol. 10, pp. 2092 – 2097, 2011.
[123] N. Venkateshwaran, A. Elayaperumal and G. K. Sathiya, “Prediction of tensile
properties of hybrid-natural fiber composites,” Comp. Part B: vol. 43, pp. 793
– 796, 2012.
188 references
[124] F. G. Torres and M. L. Cubillas, “Study of the interfacial properties of natural
fibre reinforced polyethylene,” Polym. Test. J., vol. 24, pp. 694 – 698, 2005.
[125] M. M. Haque, M. Hasan, M. S. Islam and M. E. Ali, “Physico-mechanical
properties of chemically treated palm and coir fiber reinforced polypropylene
composites,” Biores. Technol., vol. 100, pp. 4903 – 4906, 2009.
[126] P. Saha, S. Manna, S. R. Chowdhury, R. Sen, D. Roy and B. Adhikari,
“Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam
treatment,” Biores. Technol., vol. 101, pp. 3182 – 3187, 2010.
[127] R. Kozlowski and M. Wladyka-Przybylak, „„Use of Natural Fiber Reinforced
Plastics,‟‟ in Natural Fibers, Plastics and Composites, F.T. Wallenberger and
N.E. Weston, Eds., Kluwer Academic Publisher, New York, Chapter 14, pp.
266, 2004.
[128] S Shibata, Y Cao and I. Fukumoto, “Press forming of short natural fiber-
reinforced biodegradable resin: effects of fiber volume and length on flexural
properties,” Polym. Test. J., vol. 24, pp. 1005 – 1011, 2005.
[129] P.J. Herrera-Franco and A. Valadez-González, “Mechanical Properties of
Continuous Natural Fibre Reinforced Polymer Composites,” Comp. Part A:
vol. 35, pp. 339 - 345, 2004.
[130] H. D. Rozman, G. S. Tay, R. N. Kumar, A. Abubakar, H. Ismail and Z. A.
Mohd. Ishak, “Polypropylene Hybrid Composites: A preliminary Study on the
Use of Glass and Coconut Fiber as Reinforcements in Polypropylene
Composites,” Polym. Plast. Technol. Eng., vol. 38, no. 5, pp. 997 - 1011, 1999.
[131] L. Uma Devi, S. S. Bhagawan and S. Thomas, “Mechanical Properties of
Pineapple Leaf Fiber-Reinforced Polyester Composites,” J. Appl. Polym. Sci.,
vol. 64, pp. 1739 -1748, 1997.
189 references
[132] B. F. Yousif, S. T. W. Lau and S. Mc William, “Polyester composite based on
betelnut fibre for tribological applications,” Tribol. Int., vol. 43, pp. 503 – 511,
2010.
[133] C. W. Chin and B. F. Yousif, “Potential of kenaf fibres as reinforcement for
tribological applications,” Wear, vol. 267, pp. 1550 – 1557, 2009.
[134] B. Yousif and N. El-Tayeb, “Adhesive wear performance of T-OPRP and UT-
OPRP Composites,” Tribol. Lett., vol. 32, pp. 199 – 208, 2008.
[135] N. Chand and U. K. Dwivedi, “Sliding wear and friction characteristics of sisal
fibre reinforced polyester composites: effect of silane coupling agent and
applied load,” Polym. Comp., vol. 29, pp. 280 – 284, 2008.
[136] S. A. R. Hashmi, U. K. Dwivedi and N. Chand, “Graphite modified cotton
fibre reinforced polyester composites under sliding wear conditions,” Wear,
vol. 262, pp. 1426 – 1432, 2007.
[137] N. Chand and U. K. Dwivedi, “Effect of coupling agent on abrasive wear
behaviour of chopped jute fibre-reinforced polypropylene composites,” Wear,
vol. 261, pp. 1057 –1063, 2006.
[138] U. Nirmal, J. Hashim and K. O. Low, “Adhesive wear and frictional
performance of bamboo fibres reinforced epoxy composite,” Tribol. Int., vol.
47, pp. 122 – 133, 2012.
[139] O. Shinji, “Mechanical properties of kenaf fibers and kenaf/PLA composites,”
Mech. Mater., vol. 40, pp. 446 – 452, 2008.
[140] U. Nirmal, B. F. Yousif, D. Rilling and P. V. Brevern, “Effect of betelnut
fibres treatment and contact conditions on adhesive wear and frictional
performance of polyester composites. Wear, vol. 268, 1354 – 1370, 2010.
190 references
[141] N. S. M. El-Tayeb, “A study on the potential of sugarcane fibers/polyester
composite for tribological applications,” Wear, vol. 265, pp. 223 – 235, 2008.
[142] B. F. Yousif, “Frictional and wear performance of polyester composites based
on coir fibres,” Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol., vol. 223, pp. 51 –
59, 2009.
[143] F. A. Al-Sulaiman, “Date palm fibre reinforced composite as a new insulating
material,” Int. J. Ener. Res., vol. 27, pp. 1293 - 1297, 2003.
[144] A. Sbiai, A. Maazouz, E. Fleury, A. Sautereau and H. Kaddamu, “Short date
palm treefibers/polyepoxy composites prepared using RTM process: Effect of
tempo-mediated oxidation of the fibers,” Bio-Res., vol. 5, no. 2, pp. 672 - 689,
2010.
[145] S. Mahdavi, H. Kermanian, A. Varshoei, “Comparision of Mechanical
Properties of Date palm Fiber-Polyethylene Composite,” Bio-Res., vol. 5, no.
4, pp. 2391 - 2403, 2010.
[146] K. M. M. Rao andM. K. Rao, “Extraction and tensile properties of natural
fibers: Vakka, date and bamboo,” Comp. Struct., vol. 77, pp. 288 – 295, 2007.
[147] M. A. AlMaadeed, Z. Nogellova, M. Micusik, I. Novak and I. Krupa,
“Mechanical, sorption and adhesive properties of composites based on low
density polyethylene filled with date palm wood powder,” Mater. Des., vol. 53,
pp. 29 - 37, 2014.
[148] F. A. Al-Sulaiman, “Mechanical Properties of Date Palm Leaf Fibers
reinforced composites,” Appl. Comp. Mater., vol. 9, pp. 369 -377, 2002.
[149] F. A. Al-Sulaiman, “Mechanical Properties of Date Palm Leafs,” J. Rein. Plast.
Comp., vol. 19, pp. 1379 - 1388, 2000.
191 references
[150] M. Shamsi and S. M. Mazloumzadeh, “Some physical and mechanical
properties of date palm trees related to cultural operations industry
mechanization,” J. Agricult. Technol., vol. 5, no. 1, pp. 17 - 31, 2009.
[151] A. Al-Khanbashi, K. Al-Kaabi and A. Hammami, “Date Palm Fibers as
Polymeric Matrix Reinforcement: Fiber Characterization,” Polym. Comp., vol.
26, no. 4, pp. 486 - 497, 2005.
[152] M. A. AlMaadeeda, R. Kahramanb, P. N. Khanama and K. Zadeha,
“Characterization of male and female date palm leaves for using as
reinforcements in polymer composites,”Int Conf. of Mechanics of Nano, Micro
and Macro Composite Structures Politecnico di. Torino., June, 18 - 20, pp. 1,
2012.
[153] J. R. Mohanty, S. N. Das, H. C. Das and S. K. Swain, “Effective Mechanical
Properties of Polyvinylalcohol Biocomposites with Reinforcement of Date
Palm Leaf Fibers,” Polym. Comp., vol. 34, no. 6, pp. 959 - 966, 2013.
[154] R. Agrawal, N. S. Saxena, K. B. Sharma, S. Thomas and M. S. Sreekala,
“Activation energy and crystallization kinetics of untreated and treated oil palm
fiber reinforced phenol formaldehyde composites,” Mater. Sci. Eng: A, vol.
277, pp.77 - 82, 2000.
[155] K. Joseph, L. H. C. Mattoso, R. D. Toledo, S. Thomas, L. H. de Carvalho, L.
Pothen, S. Kala and B. James, “Natural Fiber Reinforced Thermoplastic
Composites in Natural Polymers and Agrofibers Composites,” Frollini E., Leao
A. L. & Mattoso L. H. C. Eds., 159, San Carlos, Brazil, Embrapa, USP-IQSC,
UNESP, 2000.
[156] T. W. Frederick and W. Norman, “Natural fibers plastics and composites,
Kluwer Academic Publishers, New York, 2004.
192 references
[157] A. Paul, K. Joseph and S. Thomas, “Effect of surface treatments on the
electrical properties of low-density polyethylene composites reinforced with
short sisal fibers,” Comp. Sci. Technol., vol. 57, no. 1, pp. 67-79, 1997.
[158] K. Joseph and S. Thomas, “Effect of chemical treatment on the tensile
properties of short sisal fiber-reinforced polyethylene composites,” Polym.,
vol. 37, pp. 5139 - 5149, 1996.
[159] K. Bledzki, S. Reihmane, and J. Gassan, “Properties and modification methods
for vegetable fibers for natural fiber composites,” J. Appl. Polym. Sci., vol. 59,
pp. 1329 -1336, 1996.
[160] M. S. Sreekala, M. G. Kumaran, and S. Thomas, “Water sorption in oil palm
fiber reinforced phenol formaldehyde composites,” Comp. Part A: vol. 33, pp.
763 - 777, 2002.
[161] ASTM D3379-75, “Standard test method for tensile strength and Young‟s
modulus for high modulus single filament fibers,” ASTM Standard, 1975.
[162] R. Narendraand Y. Yiqi, “Biofibers from agricultural byproducts for industrial
Applications,” Trend. Biotechnol., vol. 23, no. 1, pp. 22 - 27, 2005.
[163] L. K. Weng, S. A. Samat, A. R. Rahmat, M. Mokhtar and A. Hassan,
“Mechanical Properties Of Short Pineapple Leaf Fiber Thermoplastic
Polypropylene Composites,” National Symposium of Polymeric Materials
(NSPM), UNITEN Bangi. August, 23 - 24, 2005.
[164] S. K. Swain and A. I. Isayev, “PA6/Clay Nanocomposites by Continuous
Sonication Process,” J. Appl. Polym. Sci., vol. 114, no. 4, pp. 2378 - 2387,
2009.
193 references
[165] S. K. Swain and A. I. Isayev, “Effect of ultrasound on HDPE/clay
nanocomposites: Rheology, structure and properties,” Polym., vol. 48, no. 1,
pp. 281 - 289, 2007.
[166] M. Tajvidi and G. Ebrahimi, “Water uptake and mechanical characteristics of
natural filler polypropylene composites,” J. Appl. Polym. Sci., vol. 88, no. 4,
pp. 941 - 946, 2003.
[167] A. Espert, F. Vilaplana and S. Karlsson, “Comparison of water absorption in
natural cellulosic fibers from wood and 1 year crops in polypropylene
composites and its influence on their mechanical properties,” Comp. Part A:
vol. 35, no. 11, pp. 1267 - 1276, 2004.
[168] C. R. Reddy, A. P. Sardashti and L. C. Simon, “Preparation and
characterization of polypropylene–wheat straw–clay composites,” Comp. Sci.
Techno., vol. 70, no. 12, pp. 1674 - 1680, 2010.
[169] C. H. Shen, G. S. Springer, “Moisture Absorption and Desorption of
Composite Materials,” J. Comp. Mater., vol. 10, no. 1, pp. 2 - 20, 1976.
[170] L. S. Eyre, “Wear Characteristics of metals”, Tribo. Int., vol. 9, no. 5, pp. 203 –
212, 1976.
[171] N. S. M. El-Tayeb, B. F. Yousif and T.C. Yap, “An investigation on worn
surfaces of chopped glass fibre reinforced polyester through SEM
observations,” Tribo. Int., vol. 41, no. 5, pp. 331 – 340, 2008.
[172] N. S. M. El-Tayeb, B. F. Yousif and T.C. Yap, Tribological studies of
polyester reinforced with CSM 450-R-glass fiber sliding against smooth
stainless steel counterface,” Wear, vol. 261, pp. 443 – 452, 2006.
194 references
[173] N. S. M. El-Tayeb and B. F. Yousif, “Evaluation of glass fibre reinforced
polyester composite for multi-pass abrasive wear applications,” Wear, vol. 262,
pp. 1140 – 1151, 2007.
[174] S. Bahadur and Y. Zheng, “Mechanical and tribological behavior of polyester
reinforced with short glass fibers,” Wear, vol. 137, no. 2, pp. 251 – 266, 1990.
[175] V. K. Srivastava and J. P. Pathak, “Friction and wear properties of bushing
bearing of graphite filled short glass fiber composite in dry sliding,” Wear, vol.
197, pp. 145 – 150, 1996.
[176] H. Pihtili and N. Tosun, “Effect of load and speed on the wear behaviour of
woven glass fabrics and aramid fiber-reinforced composites,” Wear, vol. 252,
pp. 979 – 984, 2002.
[177] J. R. Gomes, O. M. Silva, C. M. Silva, L. C. Pardini and R. F. Silva, “The
effect of sliding speed and temperature on the tribological behavior of carbon–
carbon composites,” Wear, vol. 249, pp. 240 – 245, 2001.
[178] N. S. M. El-Tayeb and B. F. Yousif, “Wear and friction behavior of CGRP and
WGRP composites subjected to dry sliding,” in: ASME World Tribology
Congress III, CD, Washington DC, USA, WTC 2005 - No. 63097, September
12 – 16, 2005.
[179] A. I. Medalia, “On structure property relations of rubber,” Proc. Int. Conf.
Kharagpuur, India; pp. 13, 1980.
[180] G. W. Stachowiak and A. W. Batchelor, “Engineering Tribology,”
Netherlands: Elsevier; 3rd
Edition, ISBN 0750673044, 2000.
[181] P. H. Shipway and N. K. Ngao, “Microscale abrasive wear of polymeric
materials,” Wear, vol. 255, no. 1 – 6, pp. 742 – 750, 2003.
195 references
[182] N. Chand, A. Naik and S. Neogi, “Three-body abrasive wear of short glass
fiber polyester composite,” Wear, vol. 242, no. 1 – 2, pp. 38 – 46, 2000.
[183] B. F. Yousif, N. Umar and K. J. Wong, “Three-body abrasion on wear and
frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE)
composite,” Mater. Des., vol. 31, pp. 4514 – 4521, 2010.
[184] J. K. A. Amu zu, B. J. Briscoe and D. Tabor, “Polymers as bearing and
lubricants: Aspects of fundamental research,” In: Advances in Tribology.
London: Institute of Mechanical Engineers; April 3 - 4, pp. 59 - 62, 1978.
[185] S. A. R. Hashmi, U. K. Dwivedi, A Naik and N. Chand, Effect of chemical
treatments on high stress abrasive wear behaviour of PP based lining
materials,” Metals Mater. Proces., vol. 14, pp. 235 – 240, 2002.
[186] B. F. Yousif and N. S. M. El-Tayeb, “High-stress three-body abrasive wear of
treated and untreated oil palm fiber reinforced polyester composite,” Proc. I
MechE. J: J. Eng. Tribol., vol. 222, no. 5, pp. 6367 - 6646, 2008.
[187] B. F. Yousif and N. S. M. El-Tayeb, “The effect of oil palm fibres as
reinforcement on tribological performance of polyester composite,” Surf. Rev.
Lett., vol. 14, no. 6, pp. 1095 – 1102, 2007.
[188] A. K. Rana, B. C. Mitra and A. N. Banerjee, “Short jute fibre-reinforced
polypropylene composite: dynamic mechanical study,” J. Appl. Polym. Sci.,
vol. 71, pp. 531 – 539, 1999.
[189] N. S. M. El-Tayeb, “Two-body abrasive behaviour of untreated SC and R-G
fibres polyester composites,” Wear, vol. 266, pp. 220 – 232, 2009.
[190] P. K. Bajpai,I. Singh and J. Madaan, “Tribological behaviour of natural fiber
reinforced PLA composites,” Wear, vol. 297, pp. 829 – 840, 2013.
196 references
[191] J. Tong, Y. Ma, D. Chen, J. Sun and L. Ren, “Effects of vascular fiber content
on abrasive wear of bamboo,” Wear, vol. 259, pp. 37 – 46, 2005.
[192] N. Chand and U. K. Dwivedi, “High stress abrasive study on bamboo,” J.
Maters. Process. Technol., vol. 183, pp. 155 – 159, 2007.
[193] N. Chand, U. K. Dwivedi and S. K. Acharya, “Anisotropic abrasive wear
behaviour of bamboo (Dentrocalamus strictus),” Wear, vol. 262, pp. 1031 –
1037, 2007.
[194] S. Basavarajappa, S. M. Yadav, S. Kumar, K. V. Arun and S. Narendranath,
“Abrasive Wear Behavior of Granite-Filled Glass-Epoxy Composites by SiC
Particles Using Statistical Analysis,” Tribo. Trans., vol. 50, no. 5, pp. 516 -
524, 2011.
[195] P. K. Padhi and A. Satapathy, “Analysis of Sliding Wear Characteristics of
BFS Filled Composites Using an Experimental Design Approach Integrated
with ANN,” Tribo. Trans., vol. 56, no. 5, pp. 789 - 796, 2013.
[196] A. Shalwan and B. F. Yousif, “In State of Art: Mechanical and tribological
behaviour of polymeric composites based on natural fibres,” Maters. Des., vol.
48, pp. 14 - 24, 2013.
[197] J. G. A Bitter, “A study of erosion phenomena”, Part I. Wear, vol. 6, pp. 5 - 21,
1993.
[198] I. M. Hutchings, R. E. Winter and J. E. Field, “Solid particle erosion of metals:
the removal of surface material by spherical projectiles,” Proc. Roy. Soc.
Lond., Ser A: vol. 348, pp. 379 - 392, 1976.
[199] M. Roy, B. Vishwanathan, G. Sundararajan, “The solid particle erosion of
polymer matrix composites,” Wear, vol. 171, pp. 149 - 161, 1994.
197 references
[200] A. Hager, K. Friedrich, Y. A. Dzenis and S. A. Paipetis, “Study of erosion
wear of advanced polymer composites,” In: Street K, editor. ICCM-10,
Conference proceedings, Whistler, BC, Canada. Cambridge (UK): Wood head
Publishing; pp. 155 - 162, 1995.
[201] A. P. Harsha and A. A. Thakre, “Investigation on solid particle erosion
behaviour of polyetherimide and its composites,” Wear, vol. 262, pp. 807 -
818, 2007.
[202] U. S. Tewari, A. P. Harsha, A. M. Hager and K. Friedrich, “Solid particle
erosion of carbon fiber- and glass fiber-epoxy composites,” Comp. Sci.
Technol., vol. 63, pp. 549 - 557, 2003.
[203] J. Bijwe, J. Indumathi, J. J. Rajesh and M. Fahim, “Friction and wear
behaviour of polyetherimide composites in various wear modes,” Wear, vol.
249, pp. 715 – 726, 2001.
[204] J. Bijwe, J. Inthi and A. K. Ghose, “On the abrasive wear behaviour of fabric -
reinforced polyetherimide composites,” Wear, vol. 253, pp. 768 - 777, 2002.
[205] A. P. Harsha, U. S. Tewari and B. Venkataraman, “Solid particle erosion
behavior of various polyarylether ketone composites,” Wear, vol. 254, pp. 693
–712, 2003.
[206] B. C. Patel, S. K. Acharya and D. Mishra, “Effect of stacking sequence on the
erosive wear behaviour of jute and jute-glass fabric reinforced epoxy
composite,” Int. J. Eng. Sci. Technol., vol. 3, no. 1, pp. 213-219, 2011.
[207] S. Biswas and A. Satapathy, “A comparative study on erosion characteristics of
red mud filled bamboo–epoxy and glass–epoxy composites,” Mater. Des., vol.
31; pp. 1752 – 1767, 2010.
198 references
[208] A. Satapathy, A. Patnaik and M. K. Pradhan, “A study on processing,
characterization and erosion behavior of fish (Labeo-rohita) scale filled epoxy
matrix composites,” Mater. Des., vol. 30, pp. 2359 – 2371, 2009.
[209] A. W. Ruff and L.K. Ives, “Measurement of solid particle velocity in erosive
wear,” Wear, vol. 35, pp. 195 - 199, 1975.
[210] G. P. Tilly and W. Sage, “The interaction of particle and material behaviour in
erosion process,” Wear, vol. 16, pp. 447 - 465, 1970.
[211] K.V. Pool, C. K. H. Dharan and I. Finnie, “Erosive wear of composite
materials,” Wear, vol. 107, pp. 1 - 12, 1986.
[212] G. Sundararajan and B. V. Roy, “Erosion efficiency – a new parameter to
characterize the dominant erosion mechanism”, Wear, vol. 140, pp. 369 – 381,
1990.
199 references