maraseem Page - 1 -
maraseem Page - 2 -
PART OF OUR REFERENCES IN & OUT OF THE UAE:
1. Bin Kamel Building 3000 m2 Carting Wall & 3000 m 2 Flashing. Al Hamad Contracting Co. (Sharjah)
2. SARA Tower (Sharjah-Khalid Lake) 1500 cm2 Cartin g Wall Al Hamad Contracting Co.
3. Rashid port (Dubai) 450 m2 Carting Wall Al Hamad Contracting Co.
4. Habib International Bank ( Dubai- UM Romoul) 800 m2 Carting Wall
Al Hamad Contracting Co.
5. Abu Sheqara Tower (Sharjah-Abu Sheqara) design & Install 1450 m2 Carting Wall Albusfan Aluminum & Glass Co.
6. Plaza 2000 (Ajman) 2500 m2 Carting Wall
Al Hamad Contracting Co.
7. Window people Tower ( Dubai) 450 m2 Carting Wall Albusfan Aluminum & Glass Co.
8. Window people Tower (Fujairah) Design & Install Aluminum Carting Wall 3000 m2
Carting Wall. Albusfan Aluminum & Glass Co.
9. Alsafa Tower (Dubai) Design & install 2000 m2 Ca rting Wall
Albusfan Aluminum & Glass Co.
10. Trading & Investment Bank (Bin-Ghazi-Main Branc h- Libya) Design & Install 1500 m2 Carting Wall.
11. Trading & Investment Bank (Tarq Branch- Libya) Design & Install 450 m2 Carting
Wall. 12. Sudanese Sun Agency (Khartoum-Sudan) 2300 m2 Ca rting Wall & Partitions Design
& Install.
maraseem Page - 3 -
1. AL MAWARID GENERAL CONTRACTING, Sharjah U.A.E Tel No. 06-5566000, Fax No. 06-5566111 Project: G+6 Sharjah
2. AL RAWABI CONTRACTNG, Sharjah, U.A.E. Tel No. 06-5736399, Fax No. 06-5736371 Project: G+8, Khaled EBN Al Waleed Street Owner: Authority Annum of Cease
3. AL ABBAR GENERAL CONTRACTING CO. L.L.C., Dubai U .A.E.
Tel No. 04-2220501, Fax No. 2225869 Project: Warehouse
4. AL MAMONA BUILDING CONTRACTING CO. L.L.C., Sharj ah, U.A.E. Tel No. 06-5633011, Fax No. 06-5634013 Consultant: HORIZON INTERNATIONAL CONSULTING ENGINE ER Project: G+5, Typical, Ajman
5. AL MAMONA BUILDING CONTRACTING CO. L.L.C., Sharj ah U.A.E. Project: G+3, Mowailah, Commercial Sharjah U.A.E. Tel No. 06-5633011, Fax No. 06-5634013 Consultant: HORIZON INTERNATIONAL ENGINEERING CONSU LTANT
6. AL MAMONA BUILDING CONTRACTING CO. L.L.C., Sharj ah U.A.E. Project: G+4, Al Qulaiya Sharjah U.A.E. Tel No. 06-5633011, Fax No. 06-5634013 Consultant: HORIZON INTERNATIONAL ENGINEERING CONSU LTANT
7. AL MUNA'S CONTRACTING CO. LLC., Ajman U.A.E. Tel No. 06-7438932, Fax No. 06-7438934 Owner: Mr. Omar Kamel & Mubark Haj
8. Consultant: HORIZON INTERNATIONAL CONSULTING ENG INEERING Contractor: AL MAMONA BUILDING CONTRACTING CO. L.L. C. Project: G+4 Building, Sharjah U.A.E.
9. ARABIAN TOWERS INTERNATIONAL CONSTRUCTION, Sharj ah U.A.E.
Project: G+3 Building & Shed, Muweilah Sharjah U.A. E. Tel No. 06-5695956, Fax No. 06-5695998 Owner: Mr. Ebrahem Esmaell Al Zarouni & Mr. Yousef Mohammad Reda
JOBS EXECUTED IN DUBAI & SHARJAH
maraseem Page - 4 -
10. Consultant: ARCH DESIGN GROUP
Contractor: AL KENDI PAINTING WORKS Project: G+3 Typical, Al Nahda 2 nd Dubai Owner: Mr. Ahmad Alkendi
11. Owner: AL WASIT MACHINERY, Sharjah U.A.E. Project: Labour Camp
12. AL ALAM CONSULTANT
Tel No. 06-5744889, Fax No. 06-5744339 Client: Eng. Ahmad Kusa Project: G+8, Alhamidyh Ajman
13. Consultant: AL KHAWAJAH ENGINEERING CONSULTANT
Contractor: CONSTRUCTION TECH, Ajman U.A.E. Tel No. 06-7425515, Fax No. 06-7425535 Owner: H.H. Sheikh Humaid Bin Rashid Al Noami Project: G+6P+20 Typical, on plot no. 11-40, Al Naa mia Ajman
14. Consultant: AL KHAWAJAH ENGINEERING CONSULTANT
Contractor: TEAM ENGINEERING, Sharjah U.A.E. Project: 2B+G+ M+ 7 Typical+ Gym, Dubai Muraqqabat
15. AL TAMEER GENERAL CONTRACTING COMPANY L.L.C., A jman Tel No. 7421844, Fax No. 7423791 Project: G+6, Ajman
16. Consultant: LINE CONSULTANT Contractor: AL TAMEER GENERAL CONTRACTING COMPANY L .L.C., Ajman Owner: Mr. Khalfan Bin Bader Project: G+6, Ajman Al Karama
17. BIN ZAYED CONTRACTING, Dubai U.A.E
Tel No. 04-2623237, Fax No. 04-2621598 Consultant: ALAJMI ENGINEERING CONSULTANT Project: B+G+12, Al Nahda 2 nd Dubai Owner: Mr Omar Mohd & Ahmed Bin Sulaiman
18. BIN ZAYED CONTRACTING, Dubai U.A.E. Tel No. 04-2623237, Fax No. 04-2621598 Consultant: ALAJMI ENGINEERING CONSULTANT Project: B+G+11, Al Nahda 2 nd Dubai
maraseem Page - 5 -
19. DAR AL-EMAAR ENGINEERING CONSULTANTS, Sharjah U .A.E.
Tel No. 06-5733841, Fax No. 06-5733845 Project: G+4, Al Naimiah
20. Contractor: CYRUS INTERNATIONAL
Consultant: DAR AL-EMAAR ENGINEERING CONSULTANTS, S harjah U.A.E Tel No. 06-5733841, Fax No. 06-5733845 Owner: Mr. Shahrazad Ridha Ali Project: G+8. Al Nuaimiya
21. ENG. SAFUAN SHAYESH
Owner: Mr. Nagah Salem Project: G+8 Typical Floors, Ajman
22. Owner: FIRAS RASHID AL BACHAT, Dubai, U.A.E.
Tel No. 06-5346775, Fax No. 06-5346707 Project: G+8, Sharjah, U.A.E.
23. Contractor: GOLDEN FALCONS CONTRACTING CO. L.L. C., Sharjah U.A.E.
Tel No. 06-5739997, Fax No. 06-5739779 Consultant: HORIZON INTERNATIONAL Owner: Ali Abuh'd Bakhet Project: G+7, Sharjah Muweilah
24. GULF TOWERS CONTRACTING, Sharjah U.A.E. Project: G+8, Nabaa Tel No. 06-5742221, Fax No. 06-5742332 Owner: Mr. Saeed Al Shamsee
25. GULF TOWERS CONTRACTING, Sharjah U.A.E.
Tel No. 06-5742221, Fax No. 06-5742332 Project: G + 6
26. GULF TOWERS CONTRACTING, Sharjah U.A.E. Tel No. 06-5742221, Fax No. 06-5742332 Project: G + 10
27. GULF TOWERS CONTRACTING, Sharjah U.A.E
Project: G+3, Industrial 11, Sharjah U.A.E. Tel No. 06-5742221, Fax No. 06-5742332 Client: Mr Salem Sahoo
28. KARAM GENERAL CONSTRUCTION L.L.C., Sharjah U.A. E. Project: G+8, Ajman Al Naimiah Tel No. 06-5332424, Fax No. 06-5322244 Client: M/s Muza Yousef Abdul Latif Al Serkal
maraseem Page - 6 -
29. M.E.S.C.- Modern Executive Systems Contracting L.L.C., Dubai
Consultant: ALAJMI ENGINEEERING CONSULTANT Project: B+G+ 12+ Roofs, Al Nahda 2 nd Dubai Owner: Mr. Salah Abdulrahman Mir Abdulwahed Amiri
30. OST CONSTRUCTIONAL PROJECT L.L.C., Dubai U.A.E.
Consultant: AL AJMI ENGINEERING CONSULTANT Project: B+G+ 12+ Gyms, Al Nahda 2 nd Dubai Owner: Mr. Obaid Saeed Obaid Humaidan
31. OST CONSTRUCTIONAL PROJECT, Dubai U.A.E
Consultant: NATIONAL ENGINEERING BUREU Project: G+8, Dubai Silicon Oasis Owner: Mr. Moh'd Abdullah Anouhi & Mahd Mohd Al Qay yem
32. OST CONSTRUCTIONAL PROJECT, Dubai U.A.E
Consultant: BU HUMAID ENG. CONSULTANT Project: G+8, Al Jurf Ajman
Owner: Mr Mahmood Mohamed Kayem
33. OST CONSTRUCTIONAL PROJECT, Dubai U.A.E. Project: 3B+G+12 Hotel Apartments, Al Nahda 2 nd Dubai Consultant: M/S ZIKI HOMSI Owner: Mr Salem Abdulla Bin Touq
34. SHATTAF CO. L.L.C.
Project: G+8, plot No. 149, Ajman Owner: Mr. Abu Abdullah
35. TEAM ENGINEERING ENTERPRISES Ltd.
Consultant: AL KHAWAJAH ENGINEERING CONSULTANT Project: 2B+G+7 typical + Gym, Dubai Almuraqqabat Owner: Mr. Moh'd Abdul Kareem Abu Al Hassan Al Zaro oni
36. URAL BUILDING CONTRACTING COMPANY L.L.C., Sharj ah U.A.E.
37. BHATIA GEN. CONTRACTING Project Name: Construction & Maintenance of 74 hous es @ Al Khawaneej 2 nd Dubai and 114 Villa’s @ Al Quoz for M/S. Mohammed Bin Ras hid Housing Est.
38. ORANGE KITCHEN EST (Italian Kitchen)., Salahudd in Road, Dubai, UAE Project classification: Local Kitchen, Modern Kitch en & Wardrobe Cabinet
39. CONSTRUCTION TECH., Ajman UAE
Consultant: Al Khawajah Engineering Consultancy Project Name: G + 6P + 20 Typical Floors @ Ajman UA E
40. ASTECO Contracting
Project Name: G + 8+R Residential Building
maraseem Page - 7 -
Aluminium Doors & Windows
Glazing Description & Specifications
(Table 1) Accessories:
Silicon From Wacker, Germany Coare from Italy Door Handle Hinges Sliding Window Handle Fly Screen Roller Fly Screen Handle Shutter Roller
Aluminium Ralls
Powder Coating Wood Coated
Sliding windows & Doors:
Gulf Extrusion Series of 10 cm- Double Glazing:
14005- Frame Top 14006- Frame Bottom 12321- C section 12322- interlock 09931- Shutter Top 14298- Shutter Bottom 12095- Fly Screen
Gulf Extrusion Series of 10.5 cm- Double Glazing:
13009- Frame Top 13010- Frame Bottom 13011- C section 13012- Interlock 10485- Shutter Top 13013- Shutter Bottom 12745- Fly Screen
Double Glazing from Gulf Glass Industry & Global Pioneer :
Medium & High Performance Glass Ford Glass Belgium China Clear Glass Ford Glass Belgium China
Fixed & hinged Frames: Windows & Doors
Gulf Extrusion Series of 10 cm- Double Glazing:
10266- Fixed Frame 12260- Small T 12297- Small Z 12725- Medium Z 12726- Medium T 12441- Door Bottom 10622- Fixed Frame for Bottom 09225- Bar Close
maraseem Page - 8 -
Kitchen Cabinet Types
Descriptions & Specifications I. KITCHEN CABINET :
a) Carcass: is made out of (3) three types as our local frame structure. a.) Aluminium frame with H.P.L. sheet b.) M.D.F. Board 18mm Thick & c.) Skin Plate
b) Types of Shutters/Doors:
� b-1) Post form:
Thickness 18 mm MDF Shelves: Aluminium tube 30mm x 30mm, with 5mm thk H .P.L. sheet HPL front decorative Glossy/ Matt finish thickness 0.9 mm . Color on client selection HPL backside white 0.3mm Radius 8-19 or Radius universal Exposed bottom topside ABS 2mm up to 3mm matching c olor with smooth and
rounded edges. Hinges clip on, overlay with three screws. Adjustme nts angle between 110 degrees to
165 degree nickel (Anti-corrosion finish-European m ade).
� b-2) HPL:
High pressure Laminated Heat Resistance Scratch Resistance & Easy clean With elegance of color & texture for client selecti on Shelves: Aluminium tube 30mm x 30mm, with 5 mm thk H.P.L. sheet Back Panel 3 mm H.P.L.
� b-3) PVC:
18 mm MDF panel, covered by PVC foil with design Shelves: Aluminium tube 30mm x 30mm, with 5 mm thk H.P.L. sheet Back Panel 3 mm H.P.L.
� b-4) WHITE ALUMINIUM:
Full aluminium panel with bracing aluminium sheet s ealed by solid form Shelves: Aluminium tube 30mm x 30mm, with 5 mm thk H.P.L. sheet Back Panel 3 mm H.P.L.
� b-5) MDF:
18 mm MDF covered by PVC foil Back Panel 3 mm MDF white melamine Color on client selection Edge bands PVC 2mm in thickness Shelves: white melamine MDF with hard lamination on both sides
maraseem Page - 9 -
� Doors Descriptions:
Solid Wood Frame, 19mm width The internal panel of door is MDF 13mm width covere d with veneer wood same kind
as the frame with rounded design applied into membr ane press.
� Shape of Door:
Arch shape, Square shape or Plain shape
� Kind of Paint:
C. Kind of Paint:
Polyurethane Paint (Variety from Lighter to Darker Finish) II. KITCHEN ACCESSORIES :
� Slider OMGE-Italy made:
OMGE self-closing, integrated drawer slide Height 85 mm and with height and side adjustment Finish Epoxy coated 9010 white Load capacity is 30 kg. Roller wheels injected in "Hosta Form"
� Hinges- European made:
Hinges with opening angle of 180 degrees (3903) Clip on quick and easy installation and removal Bore Diameter 35 mm Depth 12.08 mm Side, Depth and Height adjustment up to 2mm overall
� Legs- Italy made:
PVC legs 15cm height with screw adjustments 20mm (V OLPATO-ITALY) Skirting attached with brackets, color matching wit h door finish
� Handles- European made:
Stainless Steel Finish, First choice Quantity, shap e according to the choice of the
client. Thickness from 10mm – 12mm. � Fittings- European made:
All the fittings, shelf support, screw are from hig h quality specification, which ensure heavy-duty use.
maraseem Page - 10 -
Construction Stainless Steel
Kitchens Cabinets
The cabinet body as a whole sides and bottom is mad e of Stainless Steel sheets 0.7mm thick. Sandwich panels filled with polyuretha ne, density 40 kg./m3.
Shutters are made up of Stainless steel sheets sand wich type, filled by injected polyurethane density 40 kg./m which gives the shutt er stiffness/ rigidity and resistance against heat and humidity.
� Slider:
European self-closing integrated drawer slide. Load capacity is 30 kg Smooth glide and running due to glide silent roller .
� Hinges:
Stainless Steel hinges Flash type, Italian TGN bran d Or boring hinges full overlay 165 degree
� Handles:
Aluminum profile powder coated special design to co mply. The shutter with brush on
the back or alternative
� Top:
Stainless Steel 1.2 mm thick sandwich panel type 3 cm injected by Polyurethane with 10cm splash back.
Or Granite top 3cm with 10cm splash back.
Stainless Steel Kitchens Technical Specifications and Construction
I. KITCHEN CABINET:
Stainless Steel used in fabricating the cabinets an d doors is 304 or 18/10. Stainless Steel sheets passed the most important te sting methods according to
ECCA partly corresponding to DIN, ASTM and ISO stan dards. Stainless Steel sheets due to these specifications carry to the following properties.
� Formability and Adhesion:
Flexibility Scratch and Wear Resistance Weather Resistance Corrosion Resistance Chemicals and Stain Resistance Heat Resistance Elegance due to the selection of finish and texture Durability
maraseem Page - 11 -
II. KITCHEN ACCESSORIES:
� Slider OMGE-Italy made:
OMGE self-closing, integrated drawer slide Height 85 mm and with height and side adjustment Finish Epoxy coated 9010 white Load capacity is 30 kg. Roller wheels injected in "Hosta Form"
� Hinges- European made:
Hinges with opening angle of 180 degrees (3903) Clip on quick and easy installation and removal Bore Diameter 35 mm Depth 12.08 mm Side, Depth and Height adjustment up to 2mm overall
� Legs- Italy made:
PVC legs 15cm height with screw adjustments 20mm (V OLPATO-ITALY) Skirting attached with brackets, color matching wit h door finish
� Handles- European made:
Stainless Steel Finish, First choice quantity, shap e according to the choice of the
client. Thickness from 10mm – 12mm. � Fittings- European made:
All the fittings, shelf support, screw are from hig h quality specification, which ensure
heavy-duty use.
� Aluminium Framework:
Aluminum framework shall be constructed from extrud ed aluminium section of AA 6063 AL MG ALLOY which is equal to HE9 ALLOY
Hardness 71 to 84 Rockwell E Tensile strength 185 N/ sq. mm as per British stand ards BS-1474:1972 Section wall thickness 1.3mm Polyester powder coated PEF to a minimum coating th ickness of 65 microns to
comply with BS 6496-1984 � Panels:
Panels to be of high pressure solid laminated sheet HPL tested to BS 3794 & BS 4676
of the following thickness. Cabinets panels 3.5mm Door panels 5.5mm
� Doors:
Door frame should be constructed from round ended A luminum section fitted with
round duratex angles to avoid sharp edges. Doors corner should be assembled by means of screw jointed cleats. No screw should be visible on face and back edges. Doors to be fitted with rubber slamming gaskets. Door frame sections should be large enough to meet the requirements of fixing heavy
duty hinges.
maraseem Page - 12 -
Aluminium Kitchens Technical Specifications and Construction
� Construction of Aluminum Cabinets:
Our cabinets are constructed from two-side panels' side bottom, back and open top
joined with aluminium profile. � Side panels:
Constructed from three different profiles.
I. KITCHEN CABINETS:
Constructed from three different profiles.
� Carcass:
The Cabinet is made out of MDF (Medium Density Fibe rboard) 18mm thickness 120 mg. melamine on both sides. Color E1 made by FINSA Spain as per 72004 stare 063 0 MT. Edge bands PVC 2mm thickness made by Dollken German y, matching color and .45
mm Back Sides. Back panel 4mm MDF white color, one side melamine. Assembly is made by KD fitting, shelve support in Z inc Finish.
� Kitchen Cabinet Door (PVC-MDF, THERMOFOIL)
The doors are made out from MDF one side melamine 1 20mg, second side applied with PVC 0.4mm thickness made by "ROXAN- Germany".
Preheating and suction obtains this operation at hi gh temperature through specific press, using best choice of Jowat Glue .
Color according to the choice of the Client, betwee n wooden finish and solid color. � Properties:
PVC finish suitable for moulding and anti scratch. Maintaining a uniform finish, smooth and homogenous . Dimensional Stability Water Resistance
� Other properties for MDF depth routering quantity :
MDF Density is kg. M³ 800. Internal Bound N/mm² 0.65/ 0.6 Bending strength N/mm² 35/30 Swelling thickness % - 10/15
maraseem Page - 13 -
Skin plate Kitchens Technical Specifications
� Skin plate:
Skin plate is a factory fabricated plastic film lam inated on low carbon content smooth
surface steel of 0.70mm thickness. The base material of the skin plate is hot dip galv anized. The galvanization is
complying with A.S.T.M. 526 or BS 2989-1971 The Galvanization is specially treated to bleed and cover the cut edge of the sheet in
order to give maximum protection against corrosion and is according to the new unified European standard EU 10142.
The plastic PVC is applied on the galvanized sheet with 200 micron thick to give high protection against corrosion.
PVC laminated steel sheet passed the most important testing methods according to ECCA partly corresponding to DIN, ASTM and ISO stan dards.
The PVC laminated steel sheet due to these specific ations carry the following properties:
� Formability and Adhesion:
Flexibility Scratch and wear Resistance Weather Resistance Corrosion Resistance Chemicals and Stain resistance Heat Resistance Elegance due to the selection of color, gloss and d ecoration embossing Durability
� Construction of Skin plate Kitchen Cabinets:
The cabinet body as a whole sides, back and bottom is made of PVC laminated steel
sheet 0.7mm thick. Sandwich panel filled with polyu rethane, density 40 kg./m³, also can be made of single sheet.
Shutter is made of PVC laminated steel sheet sandwi ch type filled with injected polyurethane density 40 kg/m which give the shutter stiffness/ rigidity and resistance against heat and humidity.
� Sliders:
"Grass" self closing, integrated drawer slide Height 85mm with height and side adjustments Load capacity is 30 kg. Smooth glide and quiet running due to silent glide roller
� Hinges:
Stainless steel Hinges flash Italian TGN brand
� Handle:
Aluminum profiles, powder coated special design to comply. The shutter with brush on the back or alternative
maraseem Page - 14 -