Download - RIP Technology

MiCAFILBushingsZ.

Zic

09/

2003

1 RIP Technology1 RIP Technology

��Bushings

fast, professional and creativeMicafil Ltd., Zurich

��

��

��

Uncontrolled(natural) electrical field

Capacity-controlledelectrical field

��Bushings


�� !��

"!��

��

��

#�$�%��&�

#�$��

��$��

�'(��%)

��"��*��

��+�

O I POil ImpregnatedPaper

paper, oil impregn.

yes, on both sides

yes

yes

yes

< 0,007

< 10 pC

O I POil ImpregnatedPaper

paper, oil impregn.

yes, on both sides

yes

yes

yes

< 0,007

< 10 pC

R B PResin BondedPaper

paper, resin bonded

no

no

no

no, only oil-tight

< 0,015

< 250 pC

R B PResin BondedPaper

paper, resin bonded

no

no

no

no, only oil-tight

< 0,015

< 250 pC

R I PResin ImpregnatedPaper

paper, resin impreg.

no

no

no

yes

< 0,007

< 10 pC

R I PResin ImpregnatedPaper

paper, resin impreg.

no

no

no

yes

< 0,007

< 10 pC

#�,��,,'�� -.��

��Bushings


��

Conductor:- Al, Cu,- solid, tube

Specialcreep paper

Aluminiumfoils

��Bushings


��

1 Winding process

2 Drying process: - vacuum - heating

3 Under vacuum epoxy resin impregnation process

4 Curing process

��Bushings


��

5 Machining

6 Assembly 7 Routine Tests

��Bushings


� ��

��Bushings


-�+�$�"��!��*�!/��

� Simple

� Small

� Reliable

� Safe

� Environmentallyfriendly

SF6 - side ofcopper bar

transformer

side

��Bushings


Resin Impregnated Paper - R I P BushingsMain Advantages (1)

HIGH TECHNICAL STANDARD

- Low dielectric losses (tg delta < 0,35%)

- PD free up to double service voltage

- Excellent mechanical strength

- High thermal strength (class E, 120° C)

SUPERB IN DESIGN

- No porcelain shell, except for outdoor use

- Easy adaptable dimensions, customer-tailored bushings

��Bushings


Resin Impregnated Paper - R I P BushingsMain Advantages (2)

STORAGE, INSTALLATION AND SERVICE: SIMPLE AND RELIABLE

- Each position allowed (vertical to horizontal)

- Dry, oil - free = simple in handling

ENVIRONMENTALLY FRIENDLY

- Pressure - free = explosion proof, fire resistant

- No pollution by outflowing oil

��Bushings


RIP - Technology: summary of main advantages

� Flexible in Design– Adaptable on different transformer and plant constructions– compact & robust– no porcelain except for outdoor

conditions– silicon sheds possible– any installation possible (vertical,

horizontal)� Operation safe, service-friendly

– no damage risk on the bottom part– no explosion risk with influence of the

transformer– gas tight– heavy inflammable– high operation safety also by damages

of outer insulation– no porcelain on transformer side

� Environmental friendly– oil free– no explosion and fire risk through oil

leakage– no environmental risk through oil leakage– maintenance friendly– earthquake proof

� High technical level– excellent mechanical strength– low dielectric losses– partial discharge free up to the double

rated voltage– high thermal strength (120o C)

��Bushings


NEW RIP Transformer BushingsNEW RIP Transformer Bushings

GO WITH US AND GETGO WITH US AND GET

THE MAYOR ADVANTAGETHE MAYOR ADVANTAGE

AGAINST YOURAGAINST YOUR

COMPETITION!!COMPETITION!!

In modern metal enclosed switchgear SF6 - gas is usedas an extinguishing and insulating medium, ensuringhighest security standard for operating staff and resi-dents, especially in most confined and dense populatedareas.As a result, today’s space saving design requires excel-lent mechanical and electrical performance of all com-ponents involved.Micafil’s contribution to this world -wide development isit’s new product range of GARIP bushings. These havebeen designed for the direct single phase connectionbetween power transformers and gas insulated switch-gear (GIS) for rated voltages of 72.5 kV up to 550 kV.

Since more than 40 years Micafil AG produces high vol-tage bushings made with Vacuum Resin ImpregnatedPaper Technology (RIP).We are proud of our leading position in this field, makingavailable to our customers profound expertise in thelatest state of the art technology, which is based uponmore than 50000 RIP - bushings successful in operation.

The insulation body of the GARIP condenser bushingseries consists of a robust and solid core, made ofwound crepe paper and inserted aluminium foils for fieldcontrol, carefully vacuum dried and subsequentlyimpregnated with special epoxy resin.

The basic procedure for this new kind of manufacturewas originally developed by Micafil AG in Switzerlandalready in 1958 and continuously improved in the courseof four decades.

Advanced standardisation, highly skilled craftsmanshipand computer-aided engineering guarantee today’smost reliable and advanced insulation system for everyvoltage level.

Main advantages of Micafil’sRIP- technology

• Short delivery times

• Low dielectric losses (tan δ ~ 0.35%)

• Partial discharge free up to double service voltage

• Fully dry, maintenance free

• Oil - free and environmental friendly

• Highest mechanical and thermal properties

• Robust design and vandalism resistant

• Option for any operating position

• Gas and oil tight

• Easy handling

RIP - Technology for SF6 /Oil - Bushings

2

Technical Data and Dimensions

4

RTKG 362-1300 / 2000RTKG 420-1550 / 2000RTKG 525-1800 / 2000

RTKG 72.5 -350 / 2000RTKG 72.5 -350 / 2500RTKG 123-550 / 2000RTKG 123-550 / 2500RTKG 145-650 / 2000RTKG 170-750 / 2000

RTKG 245-1050 / 2000RTKG 245-1050 / 2500

View A:SF6 side

View A:SF6 side

View B:Oil side

View B:Oil side

RTKG 170-750 / 2500

Flange dimensions for:D13D14

D10D9

D8

D2D5

Test tap

n11 x Øw

n11 x Øwn11 x Øwn11 x Øw

n3 x Øv

n3 x Øvn3 x Øvn3 x Øv

M12 (2 x180°)

M12 (2 x180°)M12 (2 x180°)M12 (2 x180°)M12 (2 x180°)M12 (2 x180°)M12 (2 x180°)

M12 (2 x180°)

Groundedlength

Copper,thickness 30 mm

De-aeration of transformeropposite to test tap

De-aeration of transformeropposite to test tap

Sealing areaRa =1.6 (N7)

Aluminium,silver plated

4 x M1225 deep

Sealing areaRa = 3.2 (N8)

22.5°

15° 30°15° 30°

22.5°11.5° 22.5°11.5°

22.5°11.5°

45°

22.5°45°

22.5°45°

D7

Ø18

d4d5d6

D1

40

s1s2

20L6

2011

5

c6D

4

D3 D4

D3

D4

D3

D4

D3

D12

D11

D12

D11D12

D11

D12

D11

L16

LFL2

L

20

85

80A

B

Dimensiondrawing

Flangedimensions for:

Types 123kV - 245 kV

Types 362kV - 525 kV

Shields removable

prospectus No. D 4352 E

R = RIP InsulationT = Transformer applicationK = Short oil side partG= SF6 -gas application

Nominal current (A)

General Informations

6

Conductor loadingRated current dependent on the bushing lower length(see "Technical Data" page 5 & 6, column 12).Bushings selected with Ir not less than 120% of the ratedcurrent of the transformer are considered to be able towithstand the overload conditions according to IECPublication 60354 (Loading guide).

Recommendations for bushing installationTransformerThe field strength in the oil on the surface of the shieldinsulation must be limited to values normal for insulatedcomponents. As a guideline minimum distances A togrounded transformer parts are given below:

Bushing type

GARIP RTKG 72.5 -350 / 2000

GARIP RTKG 72.5 -350 / 2500

GARIP RTKG 123-550 / 2000

GARIP RTKG 123-550 / 2500

GARIP RTKG 145-650 / 2000

GARIP RTKG 170-750 / 2000

GARIP RTKG 170-750 / 2500

GARIP RTKG 245-1050 / 2000

GARIP RTKG 245-1050 / 2500

GARIP RTKG 362-1300 / 2000

GARIP RTKG 420-1550 / 2000

GARIP RTKG 525-1800 / 2000

Catalogue no.

HLJM 154484

HLJM 154964

HLJM 154504

HLJM 154514

HLJM 154524

HLJM 154534

HLJM 154544

HLJM 154554

HLJM 154564

HLJM 154574

HLJM 154584

HLJM 154594

TypeRTKG

123

145

170

245

362

420

525

A(mm)

130145

170200

210230

300

400

450500

550600

A

AC testvoltage (kV)

185230

275310

325365

460

570

630680

750790

Type designationThe type designation is included in an overall system. Anexample of nomenclature used to designate our GARIPbushings:

GARIP RTKG 245-1050 / 2000

Testing of the bushingEach bushing undergoes routine testing before leavingthe factory, either according to IEC 60137 or IEEEC57.19.00.

The standard tests include:

• Tan δ, capacitance and partial discharge measure-ment

• Power frequency test• Lightning impulse test (if applicable)• Leakage test

Ordering particularsWhen ordering please state:

• Type and catalogue no. see the table below• CT space L6, see "Technical Data" page 5 & 6, column

20• For 170 kV / 2000 A respective 245 kV / 2000 A only:

choose the size of oil side shield depending on thetransformer current; see "Technical Data" page 5 & 6,columns 26 &27

Lightning impulsevoltage (kV)

Rated voltage (kV)

Bushing series

GISObserve the minimum enclosurediameter DGIS as well as the minimumoperating SF6 - gas pressure (see"Technical Data" page 5 & 6, columns17 & 18). Adjacent conductor parts shouldbe well adapted to the bushing terminal.

GeneralBecause the bushing is completely dry it can beoperated vertically or horizontally or in any position.