5
Accessories
Plug-in bridges Partitions
2-mult. C 427100 End, white: B 621111
3-mult. C 427200 Middle, white: B 621112
4-mult. C 427300
Term
inal
blo
cks
type
RSA
RSA 2,5 ATechnical data
Nominal current [A] 24
Nominal voltage [V] 750 ~ ; 830 =
Width / height / length [mm] 5 / 40,5 / 41,5
Conductor cross section (Cu solid) - min/max [mm2]Conductor cross section (Cu stranded) - min/max [mm2]
0,2 ÷ 2,50,15 ÷ 1,5
Conductors with same cross section (Cu solid) [mm2]Conductors with same cross section (Cu stranded) [mm2]
2x (0,2 ÷ 1) 2x (0,2 ÷ 1)
Rated surge voltage [kV] 4
Maximum load current [A] 300
Contamination class (according to ČSN EN 60947-7-1, Art.7.1.3) 2
Tightening torque [Nm] 0,4 ÷ 0,6
Stripping length [mm] min. 6,5
Recommended ferrule length [mm] 7
Max. ferrule outside diameter [mm] 2,6
Screwdriver blade (cross / flat) PH 0 / 0,5 x 3
Packing (pc) / weight (g / pc) 100 / 7
Order No.
white (1000) A 121111
light blue (4265) A 121121
dark blue (4550) A 121131
beige (2091) A 121141
chocolate brown (2430) A 121151
red (8190) A 121161
orange (7550) A 121171
black (1999) A 121181
violet (3500) A 121191
grey (1024) A 121211
Design
Insulating body
Polyamide (PA), Inflamm-ability V0, Halogen-free
Conductivitypart
Brass (galvanicsurfaced Sn)
Fasteningpart
Thermally treated steel(galvanic surfacedZnCoCr – bracket)
A complete list of accessories, including technical and ordering data can be found in the accessories section.
RSA 4 ATechnical data
Nominal current [A] 41
Nominal voltage [V] 750 ~ ; 830 =
Width / height / length [mm] 6,6 / 39 / 41,5
Conductor cross section (Cu solid) - min/max [mm2]Conductor cross section (Cu stranded) - min/max [mm2]
0,5 ÷ 60,5 ÷ 4
Conductors with same cross section (Cu solid) [mm2] Conductors with same cross section (Cu stranded) [mm2]
3 x (0,5 ÷ 1); 2 x 1,53 x (0,5 ÷ 1); 2 x 1,5
Rated surge voltage [kV] 4
Maximum load current [A] 480
Contamination class (according to ČSN EN 60947-7-1, Art.7.1.3) 2
Tightening torque [Nm] 0,5
Stripping length [mm] 9,5
Recommended ferrule length [mm] 10
Max. ferrule outside diameter [mm] 3,6
Screwdriver blade (cross / flat) PH 0 / 0,5 x 3
Packing (pc) / weight (g / pc) 100 / 9,6
Order No.
white (1000) A 131111
light blue (4265) A 131121
dark blue (4550) A 131131
beige (2091) A 131141
chocolate brown (2430) A 131151
red (8190) A 131161
orange (7550) A 131171
black (1999) A 131181
violet (3500) A 131191
grey (1024) A 131211
Accessories
Inter-connections
Measuring jackbushes
Covering labels Covers Partitions Plug-in
bridge
2-mult. C 131112 C 235010 G 420025 4-mult. G 520026 End, white: B 631111 C 431911
3-mult. C 131212 5-mult. G 620026 Middle, white: B 631112
4-mult. C 135312
10-mult. C 135912
Design
Insulating body
Polyamide (PA), Inflamm-ability V0, Halogen-free
Conductivitypart
Brass (galvanic surfaced Ni)
Fasteningpart
Thermally treated steel (galvanic surfacedZnCoCr)
A complete list of accessories, including technical and ordering data can be found in the accessories section.
6
Term
inal
blo
cks
type
RSA
RSA 6Technical data
Nominal current [A] 57
Nominal voltage [V] 750 ~ ; 830 =
Width / height / length [mm] 7,5 / 41,5 / 41,5
Conductor cross section (Cu solid) - min/max [mm2]Conductor cross section (Cu stranded) - min/max [mm2] Conductor cross section (Al) - min/max [mm2]
0,75 ÷ 100,75 ÷ 62,5 ÷ 6
Conductors with same cross section (Cu solid) [mm2] Conductors with same cross section (Cu stranded) [mm2]
3 x (0,75 ÷ 1,5)3 x (0,75 ÷ 1,5)
Rated surge voltage [kV] 4
Maximum load current [A] 720
Contamination class (according to ČSN EN 60947-7-1, Art.7.1.3) 2
Tightening torque [Nm] 0,8
Stripping length [mm] 10,5
Recommended ferrule length [mm] 10
Max. ferrule outside diameter [mm] 4
Screwdriver blade (cross / flat) PH 1 / 0,8 x 4
Packing (pc) / weight (g / pc) 100 / 13
Order No.
white (1000) A 141110
light blue (4265) A 141120
dark blue (4550) A 141130
beige (2091) A 141140
chocolate brown (2430) A 141150
red (8190) A 141160
orange (7550) A 141170
black (1999) A 141180
violet (3500) A 141190
grey (1024) A 141210
Accessories
Inter-connections
Measuring jackbushes Covering labels
Circuit short interconnection
Partitions
2-mult. C 141112 C 241020 G 420030 ZP 6: C 346124 End, white: B 141111
3-mult. C 141212 Jack bush ZP 6: C 246020 Middle, white: B 141112
Design
Insulating body
Polyamide (PA), Inflamm-ability V0, Halogen-free
Conductivity part
Brass (galvanicsurfaced Ni)
Fastening part
Steel (galvanic surfacedZnCoCr)
A complete list of accessories, including technical and ordering data can be found in the accessories section.
RSA 10Technical data
Nominal current [A] 76
Nominal voltage [V] 750 ~ ; 830 =
Width / height / length [mm] 8,8 / 46,5 / 43
Conductor cross section (Cu solid) - min/max [mm2]Conductor cross section (Cu stranded) - min/max [mm2]Conductor cross section (Al) - min/max [mm2]
2,5 ÷ 162,5 ÷ 102,5 ÷ 10
Conductors with same cross section (Cu solid) [mm2]Conductors with same cross section (Cu stranded) [mm2]
3 x (1 ÷ 2,5)3 x (1 ÷ 2,5)
Rated surge voltage [kV] 4
Maximum load current [A] 1200
Contamination class (according to ČSN EN 60947-7-1, Art.7.1.3) 2
Tightening torque [Nm] 1,2
Stripping length [mm] 13
Recommended ferrule length [mm] 14
Max. ferrule outside diameter [mm] 5
Screwdriver blade (cross / flat) PH 1 / 0,8 x 4
Packing (pc) / weight (g / pc) 50 / 23
Order No.
white (1000) A 151110
light blue (4265) A 151120
dark blue (4550) A 151130
beige (2091) A 151140
chocolate brown (2430) A 151150
red (8190) A 151160
orange (7550) A 151170
black (1999) A 151180
violet (3500) A 151190
grey (1024) A 151210
Accessories
Inter-connections
Measuring jack bushes Covering labels Partitions
2-mult. C 151112 C 281020 G 420040 End, white: B 151111
3-mult. C 151212 Middle, white: B 151112
Design
Insulating body
Polyamide (PA), Inflamm-ability V0, Halogen-free
Conductivitypart
Brass (galvanicsurfaced Ni)
Fasteningpart
Steel (galvanic surfaced ZnCoCr)
A complete list of accessories, including technical and ordering data can be found in the accessories section.
7
RSA 16 ATechnical data
Nominal current [A] 101
Nominal voltage [V] 750 ~ ; 830 =
Width / height / length [mm] 12,1 / 51,5 / 53
Conductor cross section (Cu solid) - min/max [mm2]Conductor cross section (Cu stranded) - min/max [mm2] Conductor cross section (Al) - min/max [mm2]
1,5 ÷ 251,5 ÷ 162,5 ÷ 16
Conductors with same cross section (Cu solid) [mm2]Conductors with same cross section (Cu stranded) [mm2]
2x (1,5 ÷ 6); 3x (1,5 ÷ 4)2x (1,5 ÷ 6); 3x (1,5 ÷ 4)
Rated surge voltage [kV] 4
Maximum load current [A] 1920
Contamination class (according to ČSN EN 60947-7-1, Art.7.1.3) 2
Tightening torque [Nm] 2
Stripping length [mm] 9,5
Recommended ferrule length [mm] 10
Max. ferrule outside diameter [mm] 7
Screwdriver blade (cross / flat) PH 1 / 0,8 x 4
Packing (pc) / weight (g / pc) 50 / 27
Order No.
white (1000) A 161116
light blue (4265) A 161126
dark blue (4550) A 161136
beige (2091) A 161146
chocolate brown (2430) A 161156
red (8190) A 161166
orange (7550) A 161176
black (1999) A 161186
violet (3500) A 161196
grey (1024) A 161216
Accessories
Inter-connections
Measuring jack bushes Covering labels Partitions
2-mult. C 167111 C 267020 G 410056 End, white: B 661113
3-mult. C 167211 Middle, white: B 661114
Design
Insulating body
Polyamide (PA), Inflamm-ability V0, Halogen-free
Conductivitypart
Brass (galvanicsurfaced Ni)
Fasteningpart
Thermally treated steel(galvanic surfacedZnCoCr)
A complete list of accessories, including technical and ordering data can be found in the accessories section.
Term
inal
blo
cks
type
RSA
RSA 35Technical data
Nominal current [A] 150
Nominal voltage [V] 750 ~ ; 830 =
Width / height / length [mm] 17,6 / 63 / 64
Conductor cross section (Cu solid) - min/max [mm2]Conductor cross section (Cu stranded) - min/max [mm2]Conductor cross section (Al) - min/max [mm2]
4 ÷ 504 ÷ 356 ÷ 35
Conductors with same cross section (Cu solid) [mm2] Conductors with same cross section (Cu stranded) [mm2]
2 x (4 ÷ 16); 3 x (4 ÷ 10)2 x (4 ÷ 16); 3 x (4 ÷ 10)
Rated surge voltage [kV] 4
Maximum load current [A] 4200
Contamination class (according to ČSN EN 60947-7-1, Art.7.1.3) 2
Tightening torque [Nm] 2,5
Stripping length [mm] 12,5
Recommended ferrule length [mm] 15
Max. ferrule outside diameter [mm] 9,5
Screwdriver blade (cross / flat) PH 2 / 1 x 5,5
Packing (pc) / weight (g / pc) 10 / 62
Order No.
white (1000) A 171110
light blue (4265) A 171120
dark blue (4550) A 171130
beige (2091) A 171140
chocolate brown (2430) A 171150
red (8190) A 171160
orange (7550) A 171170
black (1999) A 171180
violet (3500) A 171190
grey (1024) A 171210
Design
Insulatingbody
Polyamide (PA), Inflamm-ability V0, Halogen-free
Conductivitypart
Brass (galvanicsurfaced Ni)
Fasteningpart
Steel (galvanicsurfaced ZnCoCr)
Accessories
Inter-connections
Measuring jack bushes Covering labels Partitions
2-mult. C 171112 C 271020 G 420060 End, white: B 172111
3-mult. C 171212 Middle, white: B 172112
8
Term
inal
blo
cks
type
RSA
Pow
er t
erm
inal
blo
cks
BN-P
RSA 70Technical data
Nominal current [A] 232
Nominal voltage [V] 750 ~ ; 830 =
Width / height / length [mm] 24,4 / 85 / 70
Conductor cross section (Cu solid) - min/max [mm2]Conductor cross section (Cu stranded) - min/max [mm2]Conductor cross section (Al) - min/max [mm2]
10 ÷ 9516 ÷ 7010 ÷ 95
Conductors with same cross section (Cu solid) [mm2] Conductors with same cross section (Cu stranded) [mm2]
2 x (10 ÷ 25)2 x 16
Rated surge voltage [kV] 3,5
Maximum load current [A] 8400
Contamination class (according to ČSN EN 60947-7-1, Art.7.1.3) 2
Tightening torque [Nm] 6
Stripping length [mm] 18
Allen key No. 6
Packing (pc) / weight (g / pc) 10 / 122
Order No.
white (1000) A 181111
light blue (4265) A 181121
dark blue (4550) A 181131
beige (2091) A 181141
chocolate brown (2430) A 181151
red (8190) A 181161
orange (7550) A 181171
black (1999) A 181181
violet (3500) A 181191
grey (1024) A 181211
Accessories
Interconnections Covering labels
2-mult. C 191110 G 420070
Design
Insulatingbody
Polyamide (PA)
Conductivitypart
Brass (galvanicsurfaced Ni)
Fasteningpart
Steel (galvanicsurfaced ZnCoCr)
A complete list of accessories, including technical and ordering data can be found in the accessories section.
POWER TERMINAL BLOCKS BN-P
BN-P power terminal blocks serve for the joining of conductors terminated by eyes.BN-P power terminal blocks are used for the joining of electric circuits by copper conductors up to a maximum connecting cross section of 240mm2. Before installation to BN-P terminals, conductors must be equipped with eyes. It is possible to install terminals on DIN rails TS 35 and DIN rails TS 32 .Terminal blocks consist of an insulating body (material PA6.6, colour white/beige, inflammability V0 according to UL94, tested by hot loop according to EN 60695-2-11 960°C), connecting brass bridge, galvanic surfaced Ni and steel parts, galvanic surfaced Zn (screws, plates). The tightening of conductors with eyes under the plate is performed by the cap key or the spanner. Marking of the terminals is by label with a description possible by means of a special marking element which is mounted on the insulating body. BN-P power terminal blocks do not have any coverage and no protective cover is provided for them. They can be used at outdoor temperatures of -30° + 150°C.Products of this group are produced in the EU, have the CE indication CE and are tested according to EN 60947-1
Technical data BN-P 150 BN-P 240
Nominal current [A] 309 415
Nominal voltage [V] 750 ~ ; 830 = 750 ~ ; 830 =
Width / height / length [mm] 39 / 93 / 66 39 / 93 / 66
Conductor cross section (Cu solid) [mm2]Conductor cross section (Cu stranded) [mm2]
150120
240150
Rated surge voltage [kV] 12 12
Maximum load current [A] 15300 24500
Contamination class (according to ČSN EN 60947-7-1, Art.7.1.3)
3 3
Tightening torque [Nm] 7 7
Conductor preparation before installing terminating by eye
terminating by eye
Spanner size M12 M12
Packing (pc) / weight (g / pc) 6 / 217 6 / 317
Order No.
BN-P 150 beige J 442100
BN-P 240 beige J 442200
Design
Insulating body
Polyamide 6.6, Inflamm-ability V0, Halogen-free
Conductivitypart
Steel (galvanic surfaced Zn)
Fasteningpart
Steel (galvanicsurfaced ZnCoCr)