8/13/2019 RT 3070 the Driver and the Cracking in Enlish
1/18
. Driver installed and setting1.Install the driver
Double click ,then to install(Notice : Before you install driver,pls do not insert wireless adapter)
Choose ,clickNext
Choose the automatic icon ,then click Next
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
2/18
Appearing the following picture,then choose the icon andclick Next
After seeing the fol lowing pictures ,then click instal l ,Notice:If the driver
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
3/18
couldnot be setup,pls close your antivirus program before installing,because
some antivirus maybe influenced the the installation
The driver is installing ,picture as follows
After instal led the driver ,then click Fin ish
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
4/18
You will see an icon in your taskbar of computer after installed the driver,it
means the driver installation be finished.Then insert our wireless usb adapter to
you computer ,after finished the automatic updates ,the computer can connect
network which donot need any password
2.Preferences of Network
Double click the icon which in the lower right of Taskbar,appearing thefollowing picture
Clink the buttom appearing the following picture,then click the thebuttom ,ref resh the network (The more you refresh ,the more networks you
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
5/18
will see )
Click and choose the network (SSID ,which you should know thepassword .here ,for example ,TYY ) .Then click the buttom which in above
picture ,appearing the following picture:
Then click the icon (Next),appearing the picture as follows
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
6/18
Click the icon again,you will see the pictrue
Enter the password in the blank area of WEP Key ,then click the icon,appearing the following picture:
(Notice :you should enter the correct password ,or else you wouldnt connect
the network and get the IP)
If there are several networks ,you can click the Use Pre-logon
Connection ,in this case ,you can pre-connect this network.
NOTICE: The opt ions in the is default customer options.Click the icon in above picture,then appearing the picture as fol lows
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
7/18
Click the network TYY , then click the icon :
The softeware can get the IP address automatically ,after
connect it successfully ,then you can share the internet .
Install the VM(virtual machine) andcrack the password
1. Install the VM
Double click the icon a few minutes later,appearing thefollowing picture
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
8/18
Click
Choose Typical ,then click
Then click
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
9/18
Choose all of them ,then click
Click the icon to install,after a few minutes ,appearing the pictureas follows
Here ,you should back the the VM file and open it ,then click the icon
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
10/18
and copy the in Serialthen enter it in the blank of serialnumber
Clich to login:
Click ,after install,you will see a picture as fol lows
Click ,then finished the installation.
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
11/18
2Settings of virtual machine
Click the icon in your desktop appearing the followingpicture,then choose YES and click OK
Then appearing the picture as follows:
Click the icon , then choose the Typical later ,click
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
12/18
Choose Linuxshould choose the correct version other linux 2.6.x kernel :
Click (choose the location what you want):
Choose the ,then click Next :
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
13/18
Later ,you can create the virtual machine successfully.
3. Crack the password
Double click then choose ,and find the thedocument beini.ISO , click
Click the green button then it appears picutre as follows
Click ,to start the document of beini-1.2.2.iso
Open Beini, it wil l appear a picture, then you see many opt ions, and we choosethe first one which is default. ( wait about one minute, and you will enter it
sucussefully.
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
14/18
Notice: when you launch the VM, you should connect wireless adapterandchoose VM-Removable Devices-USB Devices-Realtek USB Devices as fo llows,
(if you cannot grap data when cracking , then you must forgot th is step) When
you see a hook in Realtek USB Devices, it means it connects the wireless adapter,
if not, you shall connect it again.
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
15/18
Then ,it st rats cracking
(Entering Beini interface)
Click the icon minidwep-gtk,then appearing the following picture:
Then clik OK ,you will see:
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
16/18
Click the bottom of Scan, which it is scanning wireless network, then youwill see:
Choose AP which you want to crack ( In client column , the higher power datais , the better singal will be. It also wi ll be more easy to crack the code) then click
lauch , it begains cracking.
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
17/18
Hex key:1351010644 This is key (Notice: the time that we need to crack the code
depends on data. When data arrives about twenty thousand or beyond this data
the password will appear. If the data do not grow in this period, it means the
packet is very small, so it may can not crack i t, then pls change AP to crack )
Remarks: If need to crack WPA or WPA 2, you can choose WPA in Encrption
option, the picture as follows:
Click Scanbutton, then it will appear AP, choose the AP you want to crack.
8/13/2019 RT 3070 the Driver and the Cracking in Enlish
18/18
Finally, click Lanch button, it begins cracking. (Generally speaking,theencrypt ion of WPA and WPA 2 is not very easy to crack ,especially for compl icatd
encrypt ion that may be digital, or composed of digitaland letter , or composed of
digital , letter and specific symbol. For some simple encrytiopn, it wil l be ok.
Notice:
1.Ways of starting the beini software : start from the CD(Put the CD into
CD-ROM ,then start the computer and entering the system ). start from VM2.Use the bottom Ctrl+Alt ,you can switch you mouse between local
computer and VM Beini sofeware.
3.Logout the beini software:right -click the mousechoose the icon logoutleft-click and cancel the hook in Buckupclick the shutdown.4.when enter the beini software in starting the computer ,how to logout the
beini software:
Right-click mouse choose logout left-click and cancel the hook inBuckup choose Reboot and click OK ,then logout the CD in CD-ROM
quickly,and enter your local computer system.