S3-Series Reverse Osmosis System
Engineered Water Treatment Solutions
S3-Series Reverse Osmosis Systems
are engineered to treat are designed and
manufactured for seawater applications
specifically tailored for capacities ranging
from 600 - 2,200 gallons per day. The S3 -
Series Reverse Osmosis Systems feature a
unique and innovative compact design that
allows for easy installation in any size area.
The S3 - Series is also equipped with premium
components which include a 316 plunger -
type pump for high performance and
corrosion resistance, a high grade corrosion
resistant aluminum frame, a programmable
computer controller with many built - in
features, fiberglass membrane housings for
durability.
Standard Features ■ S150 Computer Controller
■ LCD Backlit Display
■ Pre-Treatment Lockout
■ Tank Level Input
■ Low Pressure Monitoring and Alarm
■ Dual TDS Monitoring
■ Hour Meter
■ Feed Flush
■ High Rejection Seawater Membranes
■ Fiberglass Membrane Housings
■ AXEON 5 Micron Sediment Pre-Filter
■ AXEON® by Pentair® Single O-Ring Cartridge Housing
■ Permeate and Concentrate Flow Meters
■ AXEON 0–100 psi 316-SS Glycerin-Filled Pre-Filter
■ Pressure Gauge
■ 0–100 psi Pre-Filter Out Pressure Gauge
■ 0–1500 psi Concentrate Pressure Gauge
■ Plast-O- Matic Feed Solenoid Valve
■ AXEON 316 Stainless Steel Needle Valve
■ SS Feed Low Pressure Switch
■ SS Pump High Pressure Switch
■ CAT® 316L High Pressure Pump
■ TEFC Motor with Thermal Motor Protection
■ Chemical Pump Outlet
■ Powder Coated Aluminum Frame
■ High Pressure 316 Stainless Steel Tubing and Fittings
■ High Pressure Hose with Reusable SS Fittings
Options and Upgrades ■ Booster Pump ■ High Pressure Tank Switch ■ Permeate Divert Valve
■ Fresh Water Flush ■ Ultraviolet Light ■ Wooden Crate
Benefits ■ Fully Equipped and Customizable ■ High Quality Components ■ Individually Tested and Preserved ■ Low Operating and Maintenance Costs
■ Easy Maintenance and Servicing ■ Pre-Plumbed, Wired and Assembled ■ 1-Year Limited Warranty ■ Made in the U.S.A.
4 1 25S3S-SERIES MODEL
HOUSING QUANTITY DESIGNATION
MEMBRANE QUANTITY PER HOUSING
2.5 INCH MEMBRANE DIAMETER
AXEON Naming Matr ix
S3 Sea Water Mode l
1 1 Vesse l2 2 Vessel3 3 Vessel4 4 Vessel
1 1 Membran e
S3-4125 Reverse Osmosis System
1. All dimensions are given in inches.2. S3-4125 AXEON® model shown.
Notes:
Array SpecificationsModels Vessel Array Vessel Size Vessel Quantity Membrane Size Membrane Quantity
S3-1125 1 2540 1 2540 1
S3-2125 1:1 2540 2 2540 2
S3-3125 1:1:1 2540 3 2540 3
S3-4125 1:1:1:1 2540 4 2540 4
S3-Series Reverse Osmosis System
P: 800-320-4074 • W: www.axeonwater.comF: 800-609-0829 • E: [email protected] Country Center Drive, Suite 100, Temecula, CA 92591
MKTF-108-B AXEON is a registered trademark of AXEON Water Technologies. 01/2016 © 2016 AXEON Water Technologies
SpecificationsModels S3-1125 S3-2125 S3-3125 S3-4125
Design
System Capacity gpd (lpd) 600 (2,271) 1,200 (4,542) 1,800 (6,814) 2,200 (8,328)
Configuration Single Pass Single Pass Single Pass Single Pass
Feed Water Source*** (ppm) TDS < 45,000 ppm TDS < 45,000 ppm TDS < 45,000 ppm TDS < 45,000 ppm
Standard Recovery Rate 15% 20% 25% 36%
Rejection and Flow RatesNominal TDS Rejection 99% 99% 99% 99%
Permeate Flow* gpm (lpm) 0.41 (1.55) 0.83 (3.14) 1.25 (4.73) 1.52 (5.75)
Minimum Feed Flow gpm (lpm) 4.2 (15.9) 4.2 (15.9) 4.2 (15.9) 4.2 (15.9)
Maximum Concentrate Flow gpm (lpm) 6 (22.7) 6 (22.7) 6 (22.7) 6 (22.7)
ConnectionsFeed (in) ½ FNPT ½ FNPT ½ FNPT ½ FNPT
Permeate (in) ⅜ TUBING ⅜ TUBING ⅜ TUBING ⅜ TUBING
Concentrate (in) ⅜ TUBING ⅜ TUBING ⅜ TUBING ⅜ TUBING
MembranesMembranes Per Vessel 1 1 1 1
Membrane Quantity 1 2 3 4
Membrane Size 2540 2540 2540 2540
VesselsVessel Array 1 1:1 1:1:1 1:1:1:1
Vessel Quantity 1 2 3 4
PumpsPump Type Plunger Plunger Plunger PlungerMotor (hp) 2.5 (1.85) 2.5 (1.85) 2.5 (1.85) 2.5 (1.85)RPM @ 60 (50 Hz) 1725 (1450) 1725 (1450) 1725 (1450) 1725 (1450)
Electrical
Standard Voltage 220 VAC, 1Ph 220 VAC, 1Ph 220 VAC, 1Ph 220 VAC, 1Ph
System Dimensions**
L x W x H (in / cm) 48 x 24 x 18.5(122 x 61 x 47)
48 x 24 x 18.5(122 x 61 x 47)
48 x 24 x 18.5(122 x 61 x 47)
48 x 24 x 18.5(122 x 61 x 47)
Weight (lb / kg) 145 (65.77) 155 (70.31) 165 (74.84) 175 (79.38) * Product flow and recovery rates are based on equipment test parameters.** Does not include operating space requirements.*** Treatment ability of the RO system is dependent on feed water quality. Performance projections must be run for each installation.
Operating LimitsMaximum Feed Temperature (°F / °C)* 85 (29) Maximum Free Chlorine (ppm) 0Minimum Feed Temperature (°F / °C)* 40 (4.4) Maximum TDS (ppm) 45,000
Maximum Ambient Temperature (°F / °C) 120 (48.9) Maximum Hardness (gpg) 0Minimum Ambient Temperature (°F / °C) 40 (4.4) Maximum pH (Continuous) 11
Maximum Feed Pressure (psi / bar) 50 (3.4) Minimum pH (Continuous) 5Minimum Feed Pressure (psi / bar) 5 (0.3) Maximum pH (Cleaning 30 Min.) 12
Maximum Operating Pressure (psi / bar) 1000 (68.95) Minimum pH (Cleaning 30 Min.) 2Maximum SDI Rating (SDI) <3 Maximum Turbidity (NTU) 1
Test Parameters: 35,000 TDS Filtered (5 Micron), De-Chlorinated, Feed Water, 65 psi (4.5 bar) Feed Pressure, 850 psi (58.61 bar) Operating Pressure, 77 Degrees F (25 Degrees C), Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation.
